BIANCA-BRICK-PROXY-MIB
36 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.5 | Nodebiboip | |||
| 1.3.6.1.4.1.272.4.5.50 | TableipProxyTable | not-accessible | mandatory | Contains all settings of supported proxy applications. |
| 1.3.6.1.4.1.272.4.5.50.1 | RowipProxyEntry | not-accessible | mandatory | This table defines proxy settings of Application Level Gateway (dynamic NAT rules for special media protocols). |
| 1.3.6.1.4.1.272.4.5.50.1.1 | ColumnipProxyDescr | read-write | mandatory | User defined description of a proxy entry. |
| 1.3.6.1.4.1.272.4.5.50.1.2 | ColumnipProxyAdminStatus | read-write | mandatory | Available values are: enable(1) disable(2) delete(3) Enable or disable functionality of given proxy entry. Entry can also be deleted by setting this variable t… |
| 1.3.6.1.4.1.272.4.5.50.1.3 | ColumnipProxyApplication | read-write | mandatory | Predefined application (media protocol) ID for this transparent proxy: 'sip' -> represents a SIP proxy Application Level Gateway (ALG); 'mgcp' -> represents a … |
| 1.3.6.1.4.1.272.4.5.50.1.4 | ColumnipProxyProtocol | read-write | mandatory | Transport layer protocol used by this proxy: 'udp' -> handles UDP based transport; 'tcp' -> hanldes TCP based transport. Default value is udp. |
| 1.3.6.1.4.1.272.4.5.50.1.5 | ColumnipProxyIntPort | read-write | mandatory | Reroute to internal port: This setting is obsolete. Its functionality is now handled by mediaTerminalTable. |
| 1.3.6.1.4.1.272.4.5.50.1.6 | ColumnipProxyExtPort | read-write | mandatory | Listen for packages from and to a port on an external device (located in WAN): In case of outgoing packages (to devices in WAN) this is the destination port, i… |
| 1.3.6.1.4.1.272.4.5.50.1.7 | ColumnipProxyIntAddr | read-write | mandatory | Rerouted internal address: This setting is obsolete. Its functionality is now handled by mediaTerminalTable. |
| 1.3.6.1.4.1.272.4.5.50.1.8 | ColumnipProxyPriority | read-write | mandatory | QOS priority for sessions controlled by this proxy entry: 'default' -> use source priority, do not make any changes; 'low-latency' -> mark all packets in relat… |
| 1.3.6.1.4.1.272.4.5.50.1.9 | ColumnipProxyTimeout | read-write | mandatory | Proxy session idle timeout in seconds: if no packages were received within the time frame defined by this timeout the session will be killed. |
| 1.3.6.1.4.1.272.4.50 | Nodemedia | |||
| 1.3.6.1.4.1.272.4.50.1 | TablemediaConnTable | not-accessible | mandatory | Describes a currently active RTP session created by a SIP proxy entry. |
| 1.3.6.1.4.1.272.4.50.1.1 | RowmediaConnEntry | not-accessible | mandatory | Lists RTP session parameters for monitoring usage. |
| 1.3.6.1.4.1.272.4.50.1.1.1 | ColumnmediaConnIndex | read-only | mandatory | Unique ID of entry. |
| 1.3.6.1.4.1.272.4.50.1.1.2 | ColumnmediaConnIntAddr | read-only | mandatory | Internal address of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.3 | ColumnmediaConnIntPort | read-only | mandatory | Internal port of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.4 | ColumnmediaConnExtAddr | read-only | mandatory | External (public) address of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.5 | ColumnmediaConnExtPort | read-only | mandatory | External (public) port of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.6 | ColumnmediaConnRemoteAddr | read-only | mandatory | Destination address of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.7 | ColumnmediaConnRemotePort | read-only | mandatory | Destination port of RTP stream. |
| 1.3.6.1.4.1.272.4.50.1.1.8 | ColumnmediaConnAge | read-only | mandatory | Age of RTP session. |
| 1.3.6.1.4.1.272.4.50.2 | TablemediaTerminalTable | not-accessible | mandatory | Describes NAT access to proxy controlled terminals (devices) in LAN. |
| 1.3.6.1.4.1.272.4.50.2.1 | RowmediaTerminalEntry | not-accessible | mandatory | Definition of a NAT access rules to a SIP terminal (device) located in LAN. |
| 1.3.6.1.4.1.272.4.50.2.1.1 | ColumnmediaTerminalIntAddr | read-write | mandatory | The terminal's internal address (address of a device in LAN). |
| 1.3.6.1.4.1.272.4.50.2.1.2 | ColumnmediaTerminalIntPort | read-write | mandatory | The terminal's internal port (port of a device in LAN). |
| 1.3.6.1.4.1.272.4.50.2.1.3 | ColumnmediaTerminalExtPort | read-write | mandatory | The terminal's external port (a port on the WAN side of the gateway used for NAT access to a device in LAN). |
| 1.3.6.1.4.1.272.4.50.2.1.4 | ColumnmediaTerminalRemotePort | read-write | mandatory | The port of a remote device (located in WAN): this entry is only useful for 'Type' = 'client'. In all other cases this value has to be '0' (disabled). |
| 1.3.6.1.4.1.272.4.50.2.1.5 | ColumnmediaTerminalLifetime | read-write | mandatory | The lifetime of sessions (s) defined by this terminal entry: this parameter is only useful for 'Type' = 'client'. In this case 'Lifetime' is set to 86400 secon… |
| 1.3.6.1.4.1.272.4.50.2.1.6 | ColumnmediaTerminalAge | read-only | mandatory | Current age of terminal's last action. |
| 1.3.6.1.4.1.272.4.50.2.1.7 | ColumnmediaTerminalProto | read-write | mandatory | The terminal's transport protocol: 'udp' -> terminal uses UDP as transport; 'tcp' -> terminal uses TCP as transport. Default value is udp. |
| 1.3.6.1.4.1.272.4.50.2.1.8 | ColumnmediaTerminalType | read-write | mandatory | The type of the terminal entry: 'client' -> autodetected (and thus listed here automatically) or manually added IP phone or softclient; 'server' -> manually ad… |
| 1.3.6.1.4.1.272.4.50.2.1.10 | ColumnmediaTerminalSessions | read-only | mandatory | Terminal's currently active RTP sessions. |