BIANCA-BRICK-RADIUS-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.254 | Nodebintecsec | |||
| 1.3.6.1.4.1.272.254.8 | Noderadius | |||
| 1.3.6.1.4.1.272.254.8.1 | TableradiusServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.8.1.1 | RowradiusServerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.8.1.1.1 | ColumnradiusSrvProtocol | read-write | mandatory | Type of authentication server. To configure the radius authentication use authentication(1), for radius accounting accounting(2), for user authentication on lo… |
| 1.3.6.1.4.1.272.254.8.1.1.2 | ColumnradiusSrvAddress | read-write | mandatory | The Radius Server IP Address. |
| 1.3.6.1.4.1.272.254.8.1.1.3 | ColumnradiusSrvPort | read-write | mandatory | The radius server port. Please notice that RFC2138 assigns port 1812 and 1813 for authentication and accounting, respectively. Many Radius servers still use th… |
| 1.3.6.1.4.1.272.254.8.1.1.4 | ColumnradiusSrvSecret | read-write | mandatory | The shared secret between radius server and Brick. |
| 1.3.6.1.4.1.272.254.8.1.1.5 | ColumnradiusSrvPriority | read-write | mandatory | The radius server with the lowest priority is the first used for request. If there is no response (see also the values Timeout and Retries) the radius server w… |
| 1.3.6.1.4.1.272.254.8.1.1.6 | ColumnradiusSrvTimeout | read-write | mandatory | The amount of milliseconds (1/1000s) waiting for an outstanding request. Default is 1000 (1 second). |
| 1.3.6.1.4.1.272.254.8.1.1.7 | ColumnradiusSrvRetries | read-write | mandatory | The number of retries sent for each request, until the server state is set to inactive. Default value is 1. To prevent the radiusSrvState ever switch to inacti… |
| 1.3.6.1.4.1.272.254.8.1.1.8 | ColumnradiusSrvState | read-write | mandatory | When operational, the server state is active(1). If the radius server does not respond, its state is set to inactive(2). The administrator can set the state ma… |
| 1.3.6.1.4.1.272.254.8.1.1.9 | ColumnradiusSrvPolicy | read-write | mandatory | If set to authoritative(1), a negative answer to a request will be accepted. This is not necessarily true when set to non-authoritative(2), where the next radi… |
| 1.3.6.1.4.1.272.254.8.1.1.10 | ColumnradiusSrvValidate | read-write | mandatory | This additional option is only used for bogus RADIUS servers, which send response messages with a wrong calculated MD5 checksum. All messages generated by the … |
| 1.3.6.1.4.1.272.254.8.1.1.11 | ColumnradiusSrvDialout | read-write | mandatory | This option provides a means for RADIUS dialout configuration. When set to enabled(1), routing information is read into the brick after system startup. This in… |
| 1.3.6.1.4.1.272.254.8.1.1.12 | ColumnradiusSrvDefaultPW | read-write | mandatory | This is the default USER-PASSWORD the brick sends where no password is available (for example, in requests for the calling number or boot requests). Some RADIU… |
| 1.3.6.1.4.1.272.254.8.1.1.13 | ColumnradiusSrvReloadInterval | read-write | mandatory | Reload interval for RADIUS dialout configuration in minutes. The default is 0 (no reload is performed automatically. |
| 1.3.6.1.4.1.272.254.8.1.1.14 | ColumnradiusSrvAuthRequests | read-only | mandatory | Total number of access requests sent. |
| 1.3.6.1.4.1.272.254.8.1.1.15 | ColumnradiusSrvAuthAccepts | read-only | mandatory | Total number of access accepts received. |
| 1.3.6.1.4.1.272.254.8.1.1.16 | ColumnradiusSrvAuthRejects | read-only | mandatory | Total number of access rejects received. |
| 1.3.6.1.4.1.272.254.8.1.1.17 | ColumnradiusSrvAuthReqRetrans | read-only | mandatory | Total number of retransmitted access requests. |
| 1.3.6.1.4.1.272.254.8.1.1.18 | ColumnradiusSrvAuthReqFailed | read-only | mandatory | Total number of failed (not rejected) access requests. |
| 1.3.6.1.4.1.272.254.8.1.1.19 | ColumnradiusSrvAuthReqPending | read-only | mandatory | Total number of pending access requests. |
| 1.3.6.1.4.1.272.254.8.1.1.20 | ColumnradiusSrvAcctStarts | read-only | mandatory | Total number of accounting starts sent. |
| 1.3.6.1.4.1.272.254.8.1.1.21 | ColumnradiusSrvAcctStops | read-only | mandatory | Total number of accounting stops sent. |
| 1.3.6.1.4.1.272.254.8.1.1.22 | ColumnradiusSrvKeepalive | read-write | mandatory | Enables the periodicaly keep alive check of 'inactive' (see radiusSrvState) server. |
| 1.3.6.1.4.1.272.254.8.1.1.23 | ColumnradiusSrvGroupId | read-write | mandatory | ID for creating logical groups of RADIUS servers to be addressed for RADIUS ACCESS and ACCOUNTING requests. Note: the priority within a defined group is still … |
| 1.3.6.1.4.1.272.254.8.1.1.24 | ColumnradiusSrvNasLocation | read-write | mandatory | Description of the NAS location - to be used for accounting in some vendor-specific modes (see radiusSrvVendorMode). |
| 1.3.6.1.4.1.272.254.8.1.1.25 | ColumnradiusSrvVendorMode | read-write | mandatory | Vendor-specific NAS emulation needed for dedicated customer projects. |
| 1.3.6.1.4.1.272.254.8.1.1.26 | ColumnradiusSrvAcctOns | read-only | mandatory | Total number of accounting 'ON' messages sent. |
| 1.3.6.1.4.1.272.254.8.1.1.27 | ColumnradiusSrvAcctOffs | read-only | mandatory | Total number of accounting 'OFF' messages sent. |
| 1.3.6.1.4.1.272.254.8.1.1.28 | ColumnradiusSrvAcctResponses | read-only | mandatory | Total number of received accounting response messages. |
| 1.3.6.1.4.1.272.254.8.1.1.29 | ColumnradiusSrvGroupDescr | read-write | mandatory | Description for the logical group of RADIUS servers that is identified by radiuSrvGroupId. |
| 1.3.6.1.4.1.272.254.8.1.1.30 | ColumnradiusSrvNasOspfAreaId | read-write | mandatory | OSPF area ID to be used for all temporarily created WAN interfaces associated with this NAS location and RADIUS server context. |