BIANCA-BRICK-SEC-MIB
46 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | BitValue HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.254 | Nodebintecsec | |||
| 1.3.6.1.4.1.272.254.1 | ScalarbiboAdmAdminCommunity | read-write | mandatory | The Community name used for admin access |
| 1.3.6.1.4.1.272.254.2 | ScalarbiboAdmReadCommunity | read-write | mandatory | The Community name used for read-only access. |
| 1.3.6.1.4.1.272.254.3 | ScalarbiboAdmWriteCommunity | read-write | mandatory | The Community name used for read-write access. |
| 1.3.6.1.4.1.272.254.4 | TablebiboAdmLicenseTable | not-accessible | mandatory | This table contains the licenses, purchased for this BIANCA/BRICK. Each entry describes a license. Each license can enable one or more features of the BIANCA/B… |
| 1.3.6.1.4.1.272.254.4.1 | RowbiboAdmLicenseEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.4.1.1 | ColumnbiboAdmLicenseSerialNumber | read-write | mandatory | This object specifies the serial number of the license in case of a numerical license (together with 'Mask' and 'Key'). |
| 1.3.6.1.4.1.272.254.4.1.2 | ColumnbiboAdmLicenseMask | read-write | mandatory | The LicenseMask is a bitfield, that specifies the different features enabled by the license. (only used on a numerical license). |
| 1.3.6.1.4.1.272.254.4.1.3 | ColumnbiboAdmLicenseKey | read-write | mandatory | This object contains the activation key. A license is only valid, if the activation key is correct. |
| 1.3.6.1.4.1.272.254.4.1.4 | ColumnbiboAdmLicenseState | read-write | mandatory | To delete a license from the system, this object has to be set to delete. In case of an 'internal-ok' license the license can be erased from the modules EEPROM… |
| 1.3.6.1.4.1.272.254.4.1.5 | ColumnbiboAdmLicenseSerialId | read-write | mandatory | This object specifies the serial id string of the license in case of string license (together with 'Key'). |
| 1.3.6.1.4.1.272.254.4.1.6 | ColumnbiboAdmLicenseHwSerial | read-only | mandatory | This object contains the device Hardware serial number for which the license is purchased for. |
| 1.3.6.1.4.1.272.254.4.1.7 | ColumnbiboAdmLicenseLicType | read-only | mandatory | The type of licenseable feature. |
| 1.3.6.1.4.1.272.254.5 | ScalarbiboAdmRadiusSecret | read-write | mandatory | The shared secret for RADIUS access. |
| 1.3.6.1.4.1.272.254.6 | ScalarbiboAdmHttpPassword | read-write | mandatory | The password for HTTP access. |
| 1.3.6.1.4.1.272.254.7 | TablebiboAdmLoginTable | not-accessible | mandatory | The biboAdmLoginTable defines additional users and their passwords, and the commnd to be executed at login. |
| 1.3.6.1.4.1.272.254.7.1 | RowbiboAdmLoginEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.7.1.1 | ColumnbiboAdmLoginUser | read-write | mandatory | This is the login name. |
| 1.3.6.1.4.1.272.254.7.1.2 | ColumnbiboAdmLoginPassword | read-write | mandatory | This is the user password. |
| 1.3.6.1.4.1.272.254.7.1.3 | ColumnbiboAdmLoginCommand | read-write | obsolete | This is the command, which is started at login, e.g. sh, telnet. All external commands are possible. Variable got replaced by biboAdmLoginSnmpShellCommand. |
| 1.3.6.1.4.1.272.254.7.1.4 | ColumnbiboAdmLoginState | read-write | mandatory | The variable is used to disable or discard the entry. |
| 1.3.6.1.4.1.272.254.7.1.5 | ColumnbiboAdmLoginSnmpShellCommand | read-write | mandatory | This is the command, which is started upon shell login; examples are 'telnet <IPaddr>', 'ifstat' or 'ps -ef'. All external commands are possible, SNMP as well … |
| 1.3.6.1.4.1.272.254.7.1.6 | ColumnbiboAdmLoginSNMPAccessLevel | read-write | mandatory | Define SNMP access level for account. Available access levels are: no-access(1), read(2), write(3), admin(4) They match SNMP communities but for value no-acces… |
| 1.3.6.1.4.1.272.254.7.1.7 | ColumnbiboAdmLoginShellAccessLevel | read-write | mandatory | Define Shell access level for account. Available access levels are 0 and 1, basically switching shell access off or on, respectively. Default value is 0 in ord… |
| 1.3.6.1.4.1.272.254.7.1.8 | ColumnbiboAdmLoginHTTPAccessRights | read-write | mandatory | Define HTTP access rights for account which are defined as bit field. Available access right bits are currently: bit 0: admin - access to any and all pages bit… |
| 1.3.6.1.4.1.272.254.7.1.9 | ColumnbiboAdmLoginGUIAccessLevel | read-write | obsolete | Define GUI access level for account. Available access levels reach from 0 to 255. Value 0 turns GUI access off, value 1 defines allmighty administrator role. O… |
| 1.3.6.1.4.1.272.254.7.1.10 | ColumnbiboAdmLoginActivityMonAccessLevel | read-write | mandatory | Define activitiy monitor access level for account. Value 0 inhibits any means of influencing system by activity monitor mechanisms. Value 1 grants full access.… |
| 1.3.6.1.4.1.272.254.7.1.11 | ColumnbiboAdmLoginApDiscAccessLevel | read-write | mandatory | Define access level for access point discovery instances. Value 0 inhibits any means of influencing system by access point discovery mechanisms. Value 1 grants… |
| 1.3.6.1.4.1.272.254.7.1.12 | ColumnbiboAdmLoginHTTPAccessClass | read-write | mandatory | Define SNMP access class for account. Available access levels are: user(1), admin(2), HTTP access class allows HTTP sessions to be classified and realize limit… |
| 1.3.6.1.4.1.272.254.7.1.13 | ColumnbiboAdmLoginGUIAccessMask | read-write | mandatory | Define GUI access level bits for account. Available access levels bits reach from 0 to 30 Value 0 turns GUI access off, bit 0 (value 1) is reserved bit 1 (valu… |
| 1.3.6.1.4.1.272.254.7.1.14 | ColumnbiboAdmLoginGUIWriteAccessMask | read-write | mandatory | Define GUI write access level bits for account. Available write access levels bits reach from 0 to 30 Value 0 turns GUI write access off, bit 0 (value 1) is re… |
| 1.3.6.1.4.1.272.254.7.1.15 | ColumnbiboAdmLoginPasswordChangeRequired | read-write | mandatory | If biboAdmLoginPasswordChangeRequired is set to enabled the GUI demands a password change for this user at the next login. After the password change GUI sets t… |
| 1.3.6.1.4.1.272.254.10 | ScalarbiboAdmPublicKey | read-only | mandatory | Generated public key for TAF client access |
| 1.3.6.1.4.1.272.254.11 | ScalarbiboAdmPrivateKey | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.12 | ScalarbiboAdmActMonPassword | read-write | mandatory | The password for Activity Monitor access. |
| 1.3.6.1.4.1.272.254.14 | TablebiboAdmGuiAccessTable | not-accessible | mandatory | The biboAdmGuiAccessTable defines 'required access level' for GUI access IDs. |
| 1.3.6.1.4.1.272.254.14.1 | RowbiboAdmGuiAccessEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.14.1.1 | ColumnbiboAdmGuiAccessIndex | read-write | mandatory | The GUI access index of the associated id. |
| 1.3.6.1.4.1.272.254.14.1.3 | ColumnbiboAdmGuiAccessState | read-write | mandatory | Make entry valid/invalid or discard it. |
| 1.3.6.1.4.1.272.254.14.1.4 | ColumnbiboAdmGuiAccessRequiredLvlMask | read-write | mandatory | Define required GUI access level bits. Available access levels bits reach from 0 to 30 Normal behavior: Only users get access to the part of GUI which is speci… |
| 1.3.6.1.4.1.272.254.15 | TablebiboAdmGuiAccessLevelTable | not-accessible | mandatory | This table holds a description for used level bits. |
| 1.3.6.1.4.1.272.254.15.1 | RowbiboAdmGuiAccessLevelEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.15.1.1 | ColumnbiboAdmGuiAccessLevelBitNr | read-write | mandatory | Access level bit. |
| 1.3.6.1.4.1.272.254.15.1.2 | ColumnbiboAdmGuiAccessLevelState | read-write | mandatory | Make entry valid/invalid or discard it. |
| 1.3.6.1.4.1.272.254.15.1.3 | ColumnbiboAdmGuiAccessLevelDescription | read-write | mandatory | Description for this access level bit. |