BIANCA-BRICK-SERIAL-MIB
33 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | Date HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.25 | Nodeserial | |||
| 1.3.6.1.4.1.272.4.25.1 | TableserialIfTable | not-accessible | mandatory | The serialIfTable contains information relating to the interfaces available on the system. Each entry corresponds to an available serial interface. Entries can… |
| 1.3.6.1.4.1.272.4.25.1.1 | RowserialIfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.25.1.1.1 | ColumnserialIfIndex | read-only | mandatory | Unique interface index of the serial interface. |
| 1.3.6.1.4.1.272.4.25.1.1.2 | ColumnserialIfType | read-write | mandatory | The serial physical interface type none(1) interface disabled x21(2) X21(V11) terminated (sync) v35(3) V35(V11 & V28) (sync) v36(4) V36(V10 & V11) (sync) x21bi… |
| 1.3.6.1.4.1.272.4.25.1.1.3 | ColumnserialIfConnector | read-write | mandatory | The physical connector type. When configured as DCE the pins on the output connector act as a DCE interface. If configured as DTE on the output connector act a… |
| 1.3.6.1.4.1.272.4.25.1.1.4 | ColumnserialIfLeads | read-write | mandatory | The value of IfLeads has influence on the state of the physical layer (L1State). When configured as IfLeads=enabled, the state of the physical layer depends on… |
| 1.3.6.1.4.1.272.4.25.1.1.5 | ColumnserialIfClock | read-write | mandatory | The physical layer (layer 1) clocking mode. When configured as AUTO the clock provided depends what is configured on connector. If connector is configured as D… |
| 1.3.6.1.4.1.272.4.25.1.1.6 | ColumnserialIfClockEdge | read-write | mandatory | The value of IfClockEdge influences the (internal) active clock edge(s) for generating/sampling data on the serial line. This value should be left on DEFAULT u… |
| 1.3.6.1.4.1.272.4.25.1.1.8 | ColumnserialIfSpeed | read-write | mandatory | The serial interface speed in bits per second. The range is dependant on the type of the line (balanced/unbalanced) and the quality and length of the cable. Ov… |
| 1.3.6.1.4.1.272.4.25.1.1.10 | ColumnserialIfL2Mode | read-write | mandatory | The layer 2 mode. This value has influence on the HDLC address field (first byte of a HDCL frame). When configured as DTE the address in a command frame is 0x0… |
| 1.3.6.1.4.1.272.4.25.1.1.11 | ColumnserialIfCableDetection | read-write | mandatory | Cable autodetection for: manual(1) disabled auto(2) serialIfType and serialIfConnector iftype(3) serialIfType connector(4) serialIfConnector |
| 1.3.6.1.4.1.272.4.25.1.1.12 | ColumnserialIfCableType | read-only | mandatory | Show the detected cable type: unknown(1) cable type unknown. x21(2) DB15, X27/V11 (sync) v35(3) M34, V35/V10 (sync) v36(4) DB37, V10/V11 (sync) x21bis(5) DB25,… |
| 1.3.6.1.4.1.272.4.25.1.1.13 | ColumnserialIfCableConnector | read-only | mandatory | Show the detected cable connector type: dte(1) DTE cable dce(2) DCE cable unknown(3) cable type unknown. not-supported(4) cable detection not supported. |
| 1.3.6.1.4.1.272.4.25.1.1.14 | ColumnserialIfBundle | read-write | mandatory | Index of the bundle to aggregate multiple Channels to one interface. |
| 1.3.6.1.4.1.272.4.25.1.1.15 | ColumnserialIfL1State | read-only | mandatory | The serial physical layer state dn(1) physical layer is inactive up(2) physical layer is active |
| 1.3.6.1.4.1.272.4.25.1.1.16 | ColumnserialIfSpeedReal | read-only | mandatory | In DCE/internal clock mode this is the rounded speed in bits per second, because not every baudrate can exactly be generated. In DTE/external clock mode this i… |
| 1.3.6.1.4.1.272.4.25.1.1.17 | ColumnserialIfLicense | read-only | mandatory | Shows wether a serial license associated with this serial port port is required, missing or in use. |
| 1.3.6.1.4.1.272.4.25.1.1.20 | ColumnserialIfRxPackets | read-only | mandatory | Count of received valid Frames. |
| 1.3.6.1.4.1.272.4.25.1.1.21 | ColumnserialIfRxOctets | read-only | mandatory | Count of received bytes. |
| 1.3.6.1.4.1.272.4.25.1.1.22 | ColumnserialIfTxPackets | read-only | mandatory | Count of transmitted valid Frames. |
| 1.3.6.1.4.1.272.4.25.1.1.23 | ColumnserialIfTxOctets | read-only | mandatory | Count of transmitted bytes. |
| 1.3.6.1.4.1.272.4.25.1.1.24 | ColumnserialIfRxResets | read-only | mandatory | Count of receiver resets. Under rare circumstances it might be necessary to reset the receiver to work properly. |
| 1.3.6.1.4.1.272.4.25.1.1.25 | ColumnserialIfRxAborts | read-only | mandatory | Count of receiver aborts. The sender of a frame can indicate a frame as aborted with a special Abort sequence. |
| 1.3.6.1.4.1.272.4.25.1.1.26 | ColumnserialIfRxOverruns | read-only | mandatory | Count of receiver overruns. If the serial port is unable to grant sufficiently soon/often the bus, the RxFIFO may fill up. This leads to loss of data. |
| 1.3.6.1.4.1.272.4.25.1.1.27 | ColumnserialIfRxCRCErrors | read-only | mandatory | Count of corrupted frames. Errors due to interference on the serial cable. |
| 1.3.6.1.4.1.272.4.25.1.1.28 | ColumnserialIfRxGiantFrames | read-only | mandatory | Count of received frames with illegal framesize. This can occur if a frame delimiter is destroyed. |
| 1.3.6.1.4.1.272.4.25.1.1.29 | ColumnserialIfTxResets | read-only | mandatory | Count of transmitter resets. Under rare circumstances it might be necessary to reset the transmitter to work properly. |
| 1.3.6.1.4.1.272.4.25.1.1.30 | ColumnserialIfTxAborts | read-only | mandatory | Count of transmitter aborts. While sending a frame it might be necessary to indicate this frame as aborted. In this case the receiver regards this frame as ill… |
| 1.3.6.1.4.1.272.4.25.1.1.31 | ColumnserialIfTxUnderruns | read-only | mandatory | Count of transmitter underruns. The serial data for the serial port is supplied too slowly. |
| 1.3.6.1.4.1.272.4.25.1.1.32 | ColumnserialIfTxGiantFrames | read-only | mandatory | Count of transmitted frames with illegal framesize. This can occur if an upper module creates packets with more than the maximum allowed packet size. |