BIANCA-BRICK-TACACSP-MIB
22 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.254 | Nodebintecsec | |||
| 1.3.6.1.4.1.272.254.13 | Nodetacacsp | |||
| 1.3.6.1.4.1.272.254.13.1 | TabletacacspServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.13.1.1 | RowtacacspServerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.254.13.1.1.1 | ColumntacacspSrvPriority | read-write | mandatory | The TACACS+ server with the lowest priority is the first used for an TACACS+ AAA request. If there is no response or the access was denied (in the non-authorit… |
| 1.3.6.1.4.1.272.254.13.1.1.2 | ColumntacacspSrvAddress | read-write | mandatory | The TACACS+ server IP address. |
| 1.3.6.1.4.1.272.254.13.1.1.3 | ColumntacacspSrvTcpPort | read-only | mandatory | The Login Host Protocol (TACACS) TCP port assigned by the IANA. |
| 1.3.6.1.4.1.272.254.13.1.1.4 | ColumntacacspSrvSecret | read-write | mandatory | The shared secret between the TACACS+ server and the NAS (encryption key in the TACACS+ server's configuration file). |
| 1.3.6.1.4.1.272.254.13.1.1.5 | ColumntacacspSrvTimeout | read-write | mandatory | The amount of seconds waiting for an outstanding TACACS+ response. Default is three seconds. |
| 1.3.6.1.4.1.272.254.13.1.1.7 | ColumntacacspSrvAdminStatus | read-write | mandatory | The administrative status of this TACACS+ server entry, if set to up(1) the associated server will be used for authentication, authorization and accounting acc… |
| 1.3.6.1.4.1.272.254.13.1.1.8 | ColumntacacspSrvOperStatus | read-only | mandatory | The operational status of this TACACS+ server entry, the status blocked will be set after a failed TACACS+ request. If set to blocked(2) or down(3) this entry … |
| 1.3.6.1.4.1.272.254.13.1.1.9 | ColumntacacspSrvPolicy | read-write | mandatory | If set to authoritative(1), a negative answer to a request will be accepted. This is not necessarily true when set to non-authoritative(2), where the next TACA… |
| 1.3.6.1.4.1.272.254.13.1.1.10 | ColumntacacspSrvEncrMode | read-write | mandatory | If set to encrypt(1) the TACACS+ packet will be MD5 encrypted. Otherwise - if set to cleartext(2) - the packet and therefore all related information will be se… |
| 1.3.6.1.4.1.272.254.13.1.1.11 | ColumntacacspSrvMultiSession | read-write | mandatory | If enabled(1) multiple TACACS+ sessions (subsequent TACACS+ requests) may be supported simultaneously over a single TCP connection. If multiple sessions are no… |
| 1.3.6.1.4.1.272.254.13.1.1.13 | ColumntacacspSrvPppAuth | read-write | mandatory | Enables the PPP authentication for the associated TACACS+ server. |
| 1.3.6.1.4.1.272.254.13.1.1.14 | ColumntacacspSrvLoginAuth | read-write | mandatory | Enables the login authentication (shell) for the associated TACACS+ server. |
| 1.3.6.1.4.1.272.254.13.1.1.15 | ColumntacacspSrvAccounting | read-write | mandatory | Enables the TACACS+ accounting for the associated TACACS+ server. |
| 1.3.6.1.4.1.272.254.13.1.1.16 | ColumntacacspSrvBlockTimeout | read-write | mandatory | Timeout in seconds for the blocked status (see also tacacspSrvOperStatus), if expired, the operational status is set to up(1) or down(3) according the the curr… |
| 1.3.6.1.4.1.272.254.13.1.1.17 | ColumntacacspSrvAuthentNoResp | read-write | mandatory | Possible actions for the client when no response from servers : - allowing the connection to the router by local login pwd (2) - or stop the negociation (3). |
| 1.3.6.1.4.1.272.254.13.1.1.18 | ColumntacacspSrvAuthentNegResp | read-write | mandatory | Possible actions for the client when negative response : from servers. - allowing the connection to the router by local login pwd (2) - or stop the negociation… |
| 1.3.6.1.4.1.272.254.13.1.1.19 | ColumntacacspSrvPrivLvlOnLogin | read-write | mandatory | Configurable TACACS+ privilege level assigned after successful authentication procedure. This user-specific privilege level is needed for the subsequent comman… |