BIANCA-BRICK-UPNP-MIB
24 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.5 | Nodebiboip | |||
| 1.3.6.1.4.1.272.4.5.45 | Nodeupnp | |||
| 1.3.6.1.4.1.272.4.5.45.10 | NodeupnpGlobals | |||
| 1.3.6.1.4.1.272.4.5.45.10.10 | ScalarupnpGlobStatus | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.5.45.10.20 | ScalarupnpGlobTcpPort | read-write | mandatory | The TCP port which is monitored by UPnP for HTTP requests received from UPnP clients. |
| 1.3.6.1.4.1.272.4.5.45.10.30 | ScalarupnpGlobSsdpTtl | read-write | mandatory | The time-to-live value for SSDP packet transmitted on the LAN. If this object is set to 0, the default value specified in the ip MIB will be used instead. |
| 1.3.6.1.4.1.272.4.5.45.20 | TableipNatUPnPTable | not-accessible | mandatory | This table specifies the IP addresses and port numbers for sessions requested from outside and authorized by a UPnP client. Entries in the table are created by… |
| 1.3.6.1.4.1.272.4.5.45.20.10 | RowipNatUPnPEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.5.45.20.10.10 | ColumnipNatUPnPIfIndex | read-only | mandatory | This object specifies the interface index, for which the table entry shall be valid. |
| 1.3.6.1.4.1.272.4.5.45.20.10.20 | ColumnipNatUPnPProtocol | read-only | mandatory | This object specifies the protocol, for which the table entry shall be valid. |
| 1.3.6.1.4.1.272.4.5.45.20.10.30 | ColumnipNatUPnPRemoteAddr | read-only | mandatory | This object specifies the IP address of the remote host initiating the connection. An incoming call can only be accepted if the IP adress of the remote host in… |
| 1.3.6.1.4.1.272.4.5.45.20.10.40 | ColumnipNatUPnPExtPort | read-only | mandatory | This object specifies the destination port number for incoming calls. An incoming call can only be accepted if the destination port is the one specified by thi… |
| 1.3.6.1.4.1.272.4.5.45.20.10.50 | ColumnipNatUPnPIntAddr | read-only | mandatory | This object specifies the internal target host IP address for incoming calls matching the table entry. An incoming call matching this entry will be routed to t… |
| 1.3.6.1.4.1.272.4.5.45.20.10.60 | ColumnipNatUPnPIntPort | read-only | mandatory | This object specifies the internal target host port-number for incoming calls matching the table entry. |
| 1.3.6.1.4.1.272.4.5.45.20.10.70 | ColumnipNatUPnPLeaseDuration | read-only | mandatory | This object specifies a lease duration in seconds. The entry is discarded at the end of this time. If this object is set to 0, the lease duration is infinite, … |
| 1.3.6.1.4.1.272.4.5.45.20.10.80 | ColumnipNatUPnPStatus | read-write | mandatory | This object specifies whether this entry is currently enabled or disabled. |
| 1.3.6.1.4.1.272.4.5.45.20.10.90 | ColumnipNatUPnPDescription | read-only | mandatory | This object specifies an optional description for this entry. |
| 1.3.6.1.4.1.272.4.5.45.30 | TableupnpIfTable | not-accessible | mandatory | This table specifies how various interfaces are handled by UPnP. Entries in the table are created and deleted by the system. |
| 1.3.6.1.4.1.272.4.5.45.30.10 | RowupnpIfEntry | not-accessible | mandatory | An entry in the upnpIfTable. |
| 1.3.6.1.4.1.272.4.5.45.30.10.10 | ColumnupnpIfIndex | read-only | mandatory | This object specifies the interface index, for which the table entry shall be valid. |
| 1.3.6.1.4.1.272.4.5.45.30.10.20 | ColumnupnpIfClientRequests | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.5.45.30.10.30 | ColumnupnpIfUPnPControlled | read-write | mandatory |