BIANCA-BRICK-WIRELESS-CONTROLLER-MIB
439 objects
MIB for WLAN controller
Imported Objects
| BINTEC-MIB MISSING | bibo BitValue Date |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 MODULE-IDENTITY NOTIFICATION-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.61 | IdentitywlanControllerMIB | MIB for WLAN controller | ||
| 1.3.6.1.4.1.272.4.61.1 | Nodewlc | |||
| 1.3.6.1.4.1.272.4.61.1.1 | NodewlcAC | |||
| 1.3.6.1.4.1.272.4.61.1.1.1 | ScalarwlcACAdminStatus | read-write | current | Global AC switch, that defines the role of this device. |
| 1.3.6.1.4.1.272.4.61.1.1.2 | ScalarwlcACOperStatus | read-only | current | This attribute shows the current AC operation state. |
| 1.3.6.1.4.1.272.4.61.1.1.3 | ScalarwlcACMaxNoWTP | read-only | current | Max number of WTPs that the AC can handle. |
| 1.3.6.1.4.1.272.4.61.1.1.4 | ScalarwlcACIfIndex | read-write | current | Interface index where the AC is listening. |
| 1.3.6.1.4.1.272.4.61.1.1.5 | ScalarwlcACDebugLevel | read-write | current | WLAN Controller degugging verbosity level. With a higher value more debugging information will be created. Default is normal(2). |
| 1.3.6.1.4.1.272.4.61.1.1.6 | ScalarwlcACAction | read-write | current | Setting this variable to channel_selecting(2) a successive channel reallocation is issued. Setting this variable to start_scanning(3) a successive neighborhood… |
| 1.3.6.1.4.1.272.4.61.1.1.7 | ScalarwlcACInitType | read-write | current | This variable indicates whether initialisation of WTPs is done simultaneous(1) (more than one is initialised at the same time) or successive(2) (one after the … |
| 1.3.6.1.4.1.272.4.61.1.1.8 | ScalarwlcACNoSimultaneousInit | read-write | current | This attribute defines how many WTPs can be initialised simultaneously in wlcACInitType_simultaneous. A value of 0 defines that all WTPs can be initialised at … |
| 1.3.6.1.4.1.272.4.61.1.1.9 | ScalarwlcACStatisticsTimer | read-write | current | This timer defines the interval statistics are sent from WTP to AC. Default is 30. |
| 1.3.6.1.4.1.272.4.61.1.1.10 | ScalarwlcACBintecConfigTimer | read-write | current | This timer defines how long a WTP waits for the next bintec config message before it supposes the AC to be down. Default is 10. |
| 1.3.6.1.4.1.272.4.61.1.1.11 | ScalarwlcACLostACLifetime | read-write | current | This timer defines in seconds how long a WTP still hold its configuration after he has lost the connection to its AC. The value -1 means endless. Default is 0,… |
| 1.3.6.1.4.1.272.4.61.1.1.12 | ScalarwlcACLedMode | read-write | current | Choose one of the following LED-Modes for all manages WTPs: normal : LEDs work normal, minimal : only Status-LED blinks once in a second, off := LEDs are off. |
| 1.3.6.1.4.1.272.4.61.1.1.13 | ScalarwlcACScanResultsMaxAge | read-write | current | If a scan result wasn't seen for so many seconds, it will be removed from wlcScanResultsTable. |
| 1.3.6.1.4.1.272.4.61.1.2 | TablewlcACAddressTable | not-accessible | current | This table lists the IP address type and the IP address of the AC |
| 1.3.6.1.4.1.272.4.61.1.2.1 | RowwlcACAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.2.1.1 | ColumnwlcACAddressIndex | read-write | current | Unique index of an accessible AC. |
| 1.3.6.1.4.1.272.4.61.1.2.1.2 | ColumnwlcACAddressInetType | read-write | current | IP address type. Possible values are: -unknown(0): an unknown address type -ipv4(1) : an IPv4 address -ipv6(2) : an IPv6 address -ipv4z(3) : a non-global IPv4 … |
| 1.3.6.1.4.1.272.4.61.1.2.1.3 | ColumnwlcACAddressInetAddress | read-write | current | The IP address of the accessbile AC. |
| 1.3.6.1.4.1.272.4.61.1.2.1.4 | ColumnwlcACAddressAdminStatus | read-write | current | Enable, disable or delete the requested AC address. |
| 1.3.6.1.4.1.272.4.61.1.3 | TablewlcWTPTable | not-accessible | current | The wlcWTPTable contains information relating to the WTPs currently managed by our Access Controller (AC). Each entry corresponds to a managed Wireless Termina… |
| 1.3.6.1.4.1.272.4.61.1.3.1 | RowwlcWTPEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.3.1.1 | ColumnwlcWTPIndex | read-write | current | Unique index for the WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.2 | ColumnwlcWTPAdminStatus | read-write | current | Enable, disable or delete the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.3 | ColumnwlcWTPOperStatus | read-only | current | This notification shows if the WTP is currently operative. |
| 1.3.6.1.4.1.272.4.61.1.3.1.4 | ColumnwlcWTPMacAddress | read-write | current | First ethernet MAC address of the WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.5 | ColumnwlcWTPDescription | read-write | current | Description of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.6 | ColumnwlcWTPName | read-write | current | Name of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.7 | ColumnwlcWTPLocation | read-write | current | Location of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.8 | ColumnwlcWTPAdminSwVer | read-write | current | This variable displays the current software version of each WTP |
| 1.3.6.1.4.1.272.4.61.1.3.1.9 | ColumnwlcWTPEncryption | read-write | current | Enable or disable the encryption between AC and WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.10 | ColumnwlcWTPTriggerStat | read-write | current | Setting this variable to update(2) the WTP is triggered to send statistics (VSS, ACLDenied, stations, ...). After the trigger is sent it is switched back to id… |
| 1.3.6.1.4.1.272.4.61.1.3.1.11 | ColumnwlcWTPsecIndex | read-write | current | This attribute shows the currently configured secIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.12 | ColumnwlcWTPauthEapolIndex | read-write | current | This attribute shows the currently configured EapolIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.13 | ColumnwlcWTPglobalIndex | read-write | current | This attribute shows the currently configured globalIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.14 | ColumnwlcWTPradiusSrvIndex | read-write | current | This attribute shows the currently configured radiusSrvIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.15 | ColumnwlcWTPlogHostIndex | read-write | current | This attribute shows the currently configured logHostIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.16 | ColumnwlcWTPscheduleIndex | read-write | current | This attribute shows the currently configured scheduleIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.3.1.17 | ColumnwlcWTPlocalServicesIndex | read-write | current | This attribute shows the currently configured localServicesIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.4 | TablewlcWTPMaintenanceTable | not-accessible | current | This table delivers maintenance/debugging actions executed on the WTP |
| 1.3.6.1.4.1.272.4.61.1.4.1 | RowwlcWTPMaintenanceEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.4.1.1 | ColumnwlcWTPMaintenanceIndex | read-write | current | Index of WTP to be addressed with maintenance command. |
| 1.3.6.1.4.1.272.4.61.1.4.1.2 | ColumnwlcWTPMaintenanceState | read-write | current | This variable displays the current maintenance state of each WTP: idle: idle state start: start maintenance event (get state file or do update) running: mainte… |
| 1.3.6.1.4.1.272.4.61.1.4.1.3 | ColumnwlcWTPMaintenanceCommand | read-write | current | Type of action performed on WTP software: software update state: get state file |
| 1.3.6.1.4.1.272.4.61.1.4.1.4 | ColumnwlcWTPMaintenanceURL | read-write | current | Contains URL of the http or tftp server. Depending on wlcWTPMaintenanceCommand it serves for either destination (command state) or source (command software). |
| 1.3.6.1.4.1.272.4.61.1.5 | TablewlcSecProfileTable | not-accessible | current | The wlcSecProfileTable describes profiles for different security settings. |
| 1.3.6.1.4.1.272.4.61.1.5.1 | RowwlcSecProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.5.1.1 | ColumnwlcSecProfileIndex | read-write | current | Unique index of a security profile. |
| 1.3.6.1.4.1.272.4.61.1.5.1.2 | ColumnwlcSecProfileAdminStatus | read-write | current | Enable or delete the requestes security profile. |
| 1.3.6.1.4.1.272.4.61.1.5.1.3 | ColumnwlcSecProfileAdminCommunity | read-write | current | The Community name used for admin access. |
| 1.3.6.1.4.1.272.4.61.1.5.1.4 | ColumnwlcSecProfileReadCommunity | read-write | current | The Community name used for read-only access. |
| 1.3.6.1.4.1.272.4.61.1.5.1.5 | ColumnwlcSecProfileWriteCommunity | read-write | current | The Community name used for read-write access. |
| 1.3.6.1.4.1.272.4.61.1.6 | TablewlcRadiusSrvTable | not-accessible | current | This table combines WTP with the RADIUS service profile. |
| 1.3.6.1.4.1.272.4.61.1.6.1 | RowwlcRadiusSrvEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.6.1.1 | ColumnwlcRadiusSrvIndex | read-write | current | This variable contains the unique WTP index. |
| 1.3.6.1.4.1.272.4.61.1.6.1.2 | ColumnwlcRadiusSrvAdminStatus | read-write | current | Enable or delete the RADIUS service profile from the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.6.1.3 | ColumnwlcRadiusSrvProfIndex | read-write | current | This variable contains the unique RADIUS service profile index. |
| 1.3.6.1.4.1.272.4.61.1.7 | TablewlcRadiusSrvProfileTable | not-accessible | current | The wlcRadiusSrvProfileTable describes different RADIUS service profiles. |
| 1.3.6.1.4.1.272.4.61.1.7.1 | RowwlcRadiusSrvProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.7.1.1 | ColumnwlcRadiusSrvProfileIndex | read-write | current | Unique index of a RADIUS service profile. |
| 1.3.6.1.4.1.272.4.61.1.7.1.2 | ColumnwlcRadiusSrvProfileAddressType | read-write | current | The IP address type of the requested RADIUS service can be: -unknown(0): an unknown address type -ipv4(1) : an IPv4 address -ipv6(2) : an IPv6 address -ipv4z(3… |
| 1.3.6.1.4.1.272.4.61.1.7.1.3 | ColumnwlcRadiusSrvProfileAddress | read-write | current | The RADIUS Server IP Address. |
| 1.3.6.1.4.1.272.4.61.1.7.1.4 | ColumnwlcRadiusSrvProfilePort | read-write | current | The RADIUS server authentication port. Please notice that RFC2138 assigns ports 1812 and 1813 for authentication and accounting, respectively. Many RADIUS serv… |
| 1.3.6.1.4.1.272.4.61.1.7.1.5 | ColumnwlcRadiusSrvProfileSecret | read-write | current | The shared secret between RADIUS server and Brick. |
| 1.3.6.1.4.1.272.4.61.1.7.1.6 | ColumnwlcRadiusSrvProfilePriority | read-write | current | The RADIUS server with the lowest priority is the first used for request. If there is no response (see also the values Timeout and Retries) the RADIUS server w… |
| 1.3.6.1.4.1.272.4.61.1.7.1.7 | ColumnwlcRadiusSrvProfileTimeout | read-write | current | The amount of milliseconds (1/1000s) waiting for an outstanding request. |
| 1.3.6.1.4.1.272.4.61.1.7.1.8 | ColumnwlcRadiusSrvProfileRetries | read-write | current | The number of retries sent for each request, until the server state is set to inactive. Default value is 1. To prevent the radiusSrvState ever switch to inacti… |
| 1.3.6.1.4.1.272.4.61.1.7.1.9 | ColumnwlcRadiusSrvProfileState | read-write | current | When operational, the server state is active(1). If the RADIUS server does not respond, its state is set to inactive(2). The administrator can set the state ma… |
| 1.3.6.1.4.1.272.4.61.1.7.1.10 | ColumnwlcRadiusSrvProfileKeepAlive | read-write | current | Enables the periodicaly keep alive check of 'inactive' (see radiusSrvState) server. |
| 1.3.6.1.4.1.272.4.61.1.8 | TablewlcAuthEapolProfileTable | not-accessible | current | The wlcRadiusSrvProfileTable describes different auth eapol profiles. |
| 1.3.6.1.4.1.272.4.61.1.8.1 | RowwlcAuthEapolProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.8.1.1 | ColumnwlcAuthEapolProfileIndex | read-write | current | Unique index of a auth eapol profile. |
| 1.3.6.1.4.1.272.4.61.1.8.1.2 | ColumnwlcAuthEapolProfileAdminStatus | read-write | current | Enable or delete the requested auth eapol profile. |
| 1.3.6.1.4.1.272.4.61.1.8.1.3 | ColumnwlcAuthEapolProfilePTK1Timeout | read-write | current | The time after which the first EAPOL-key Message in the pairwise temporal key negotiation phase (PTK1) is retransmitted if there is no reply from supplicant. T… |
| 1.3.6.1.4.1.272.4.61.1.8.1.4 | ColumnwlcAuthEapolProfilePTK3Timeout | read-write | current | The time after which the third EAPOL-key Message in the pairwise temporal key negotiation phase (PTK3) is retransmitted if there is no reply from supplicant. T… |
| 1.3.6.1.4.1.272.4.61.1.8.1.5 | ColumnwlcAuthEapolProfileGTKTimeout | read-write | current | The time after which the first EAPOL-key Message in the group temporal key negotiation phase (GTK) is retransmitted if there is no reply from supplicant. Time … |
| 1.3.6.1.4.1.272.4.61.1.8.1.6 | ColumnwlcAuthEapolProfilePairwiseUpdateCount | read-write | current | The number of times EAPOL Message 1 and Message 3 in the pairwise temporal key negotiation phase (PTK) will be retried. |
| 1.3.6.1.4.1.272.4.61.1.8.1.7 | ColumnwlcAuthEapolProfileGroupUpdateCount | read-write | current | The number of times Message 1 in the group temporal key negotiation phase (GTK) will be retried. |
| 1.3.6.1.4.1.272.4.61.1.8.1.8 | ColumnwlcAuthEapolProfileAuthPeriod | read-write | current | The time after a disassociation/deauthentication should be committed by the client if there is no EAPOL Message from authenticator. Time can be changed in step… |
| 1.3.6.1.4.1.272.4.61.1.8.1.9 | ColumnwlcAuthEapolProfileQuietPeriod | read-write | current | Period of time during which the authenticator will not attempt to acquire a supplicant. Time can be changed in steps of 1 seconds. Default value is 60 seconds. |
| 1.3.6.1.4.1.272.4.61.1.8.1.10 | ColumnwlcAuthEapolProfileTxPeriod | read-write | current | A period used by the authenticator PAE state machine to determine when an EAPOL PDU is to be transmitted. Time can be changed in steps of 1 seconds. Default va… |
| 1.3.6.1.4.1.272.4.61.1.8.1.11 | ColumnwlcAuthEapolProfileSuppTimeout | read-write | current | A timeout used by the backend authentication state machine in order to determine timeout conditions in the exchanges between the authenticator and the supplica… |
| 1.3.6.1.4.1.272.4.61.1.8.1.12 | ColumnwlcAuthEapolProfileReAuthPeriod | read-write | current | A period used by the reauthentication timer state machine to determine when reauthentication of the supplicant takes place. Time can be changed in steps of 1 s… |
| 1.3.6.1.4.1.272.4.61.1.8.1.13 | ColumnwlcAuthEapolProfileReAuthEnabled | read-write | current | The state variable reAuthEnabled controls whether periodic reauthentication takes place. Default value is false. |
| 1.3.6.1.4.1.272.4.61.1.8.1.14 | ColumnwlcAuthEapolProfileMaxReq | read-write | current | The maximum number of times that the state machine will retransmit an EAP Request packet to the supplicant before it times out the authentication session. Defa… |
| 1.3.6.1.4.1.272.4.61.1.8.1.15 | ColumnwlcAuthEapolProfileKeyTxEnabled | read-write | current | The EAPOL protocol optionally supports the transmission of global key information from the Authenticator to the Supplicant, following a successful authenticati… |
| 1.3.6.1.4.1.272.4.61.1.9 | TablewlcWTPGlobalProfileTable | not-accessible | current | This table cotains WTP debug level settings |
| 1.3.6.1.4.1.272.4.61.1.9.1 | RowwlcWTPGlobalProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.9.1.1 | ColumnwlcWTPGlobalProfileIndex | read-write | current | Unique index of a global profile. |
| 1.3.6.1.4.1.272.4.61.1.9.1.3 | ColumnwlcWTPGlobalProfileDebugType | read-write | current | Wireless LAN Controler degugging type. With type common(1) debugging messages of authentication, access_point, bridge and client handling will be shown. With t… |
| 1.3.6.1.4.1.272.4.61.1.9.1.4 | ColumnwlcWTPGlobalProfileDebugLevel | read-write | current | WLC degugging verbosity level. With a higher value more debugging information will be created. Default is normal(2). |
| 1.3.6.1.4.1.272.4.61.1.9.1.5 | ColumnwlcWTPGlobalProfileAdminStatus | read-write | current | WLC global AdminStatus. The AP could be used unmanaged(1) and must therefore be configured directly or managed(2) by a WLAN controller. Delete(32) deletes the … |
| 1.3.6.1.4.1.272.4.61.1.10 | TablewlcLogHostTable | not-accessible | current | This table combines WTP with the log host profile. |
| 1.3.6.1.4.1.272.4.61.1.10.1 | RowwlcLogHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.10.1.1 | ColumnwlcLogHostIndex | read-write | current | The wlcLogHostIndex is the unique WTP index. |
| 1.3.6.1.4.1.272.4.61.1.10.1.2 | ColumnwlcLogHostAdminStatus | read-write | current | Enable or delete the log host profile from the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.10.1.3 | ColumnwlcLogHostProfIndex | read-write | current | This variable contains the unique log host profile index. |
| 1.3.6.1.4.1.272.4.61.1.11 | TablewlcLogHostProfileTable | not-accessible | current | The wlcLogHostProfileTable contains profiles to list hosts which are to receive syslog messages. This table also defines which types and levels of messages to … |
| 1.3.6.1.4.1.272.4.61.1.11.1 | RowwlcLogHostProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.11.1.1 | ColumnwlcLogHostProfileIndex | read-write | current | Unique index of a loghost profile |
| 1.3.6.1.4.1.272.4.61.1.11.1.2 | ColumnwlcLogHostProfileAddrType | read-write | current | The IP address type of the requested loghost. could be: -unknown(0): an unknown address type -ipv4(1) : an IPv4 address -ipv6(2) : an IPv6 address -ipv4z(3) : … |
| 1.3.6.1.4.1.272.4.61.1.11.1.3 | ColumnwlcLogHostProfileAddr | read-write | current | IP Address where syslog messages are sent. If the facility is set to memory or console, this field is not used. |
| 1.3.6.1.4.1.272.4.61.1.11.1.4 | ColumnwlcLogHostProfileLevel | read-write | current | Priorities lower than or equal to this level are sent to loghost. The delete priority is used to discard the whole entry. |
| 1.3.6.1.4.1.272.4.61.1.11.1.5 | ColumnwlcLogHostProfileFacility | read-write | current | The facility used for the syslog messages being generated. |
| 1.3.6.1.4.1.272.4.61.1.11.1.6 | ColumnwlcLogHostProfileType | read-write | current | The subject of the messages that are to be generated. system means all subjects except accounting, all means all subjects. |
| 1.3.6.1.4.1.272.4.61.1.11.1.7 | ColumnwlcLogHostProfileTimestamp | read-write | current | This object describes the format of the timestamp. none(1) = no timestamp, time(2) = only time is printed, all(3) = date and time is printed. |
| 1.3.6.1.4.1.272.4.61.1.11.1.8 | ColumnwlcLogHostProfileMethod | read-write | current | This object provides protocol for sending syslog messages: udp(1) = udp tcp(2) = tcp |
| 1.3.6.1.4.1.272.4.61.1.12 | TablewlcScheduleTable | not-accessible | current | This table combines WTP with the schedule profile. |
| 1.3.6.1.4.1.272.4.61.1.12.1 | RowwlcScheduleEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.12.1.1 | ColumnwlcScheduleIndex | read-write | current | This variable contains the unique WTP index. |
| 1.3.6.1.4.1.272.4.61.1.12.1.2 | ColumnwlcScheduleAdminStatus | read-write | current | Enable or delete the schedule profile from the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.12.1.3 | ColumnwlcScheduleProfIndex | read-write | current | This variable contains the unique schedule profile index. |
| 1.3.6.1.4.1.272.4.61.1.13 | TablewlcScheduleProfileTable | not-accessible | current | The wlcScheduleProfileTable contains different schedule profiles. |
| 1.3.6.1.4.1.272.4.61.1.13.1 | RowwlcScheduleProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.13.1.1 | ColumnwlcScheduleProfileIndex | read-write | current | Unique schedule profile index. |
| 1.3.6.1.4.1.272.4.61.1.13.1.2 | ColumnwlcScheduleProfileAdminStatus | read-write | current | Enable or delete the requested schedule profile. |
| 1.3.6.1.4.1.272.4.61.1.13.1.3 | ColumnwlcScheduleProfileDescr | read-write | current | This object specifies the description (name) of this entry. Only for information. |
| 1.3.6.1.4.1.272.4.61.1.13.1.4 | ColumnwlcScheduleProfileAction | read-write | current | This variable isn't in use right now. |
| 1.3.6.1.4.1.272.4.61.1.13.1.5 | ColumnwlcScheduleProfileCondition | read-write | current | This object specifies the condition when the event is active Time events (active at the time 'Start' until 'End'): daily : the time event is daily active at gi… |
| 1.3.6.1.4.1.272.4.61.1.13.1.6 | ColumnwlcScheduleProfileStart | read-write | current | This object specifies the start value. In case of a time event it must be a time in format 'hh:mm'. In case of a value event it must be a valid value for the s… |
| 1.3.6.1.4.1.272.4.61.1.13.1.7 | ColumnwlcScheduleProfileEnd | read-write | current | This object specifies the end value (time or value range). In case of a time event it must be a time in format 'hh:mm'. If this is not given, the event is acti… |
| 1.3.6.1.4.1.272.4.61.1.13.1.8 | ColumnwlcScheduleProfileParameters | read-write | current | This variable isn't in use right now. |
| 1.3.6.1.4.1.272.4.61.1.14 | TablewlcLocalServicesTable | not-accessible | current | This table combines WTP with the local services profile. |
| 1.3.6.1.4.1.272.4.61.1.14.1 | RowwlcLocalServicesEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.14.1.1 | ColumnwlcLocalServicesIndex | read-write | current | This variable contains the unique WTP index. |
| 1.3.6.1.4.1.272.4.61.1.14.1.2 | ColumnwlcLocalServicesAdminStatus | read-write | current | Enable or delete the local services profile from the requested WTP |
| 1.3.6.1.4.1.272.4.61.1.14.1.3 | ColumnwlcLocalServicesProfIndex | read-write | current | This variable contains the unique RADIUS service profile index. |
| 1.3.6.1.4.1.272.4.61.1.15 | TablewlcLocalServicesProfileTable | not-accessible | current | This table contains configuration profiles for local services (e.g. httpd, sshd) on the WTP. |
| 1.3.6.1.4.1.272.4.61.1.15.1 | RowwlcLocalServicesProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.15.1.1 | ColumnwlcLocalServicesProfileIndex | read-write | current | Unique local services profile index |
| 1.3.6.1.4.1.272.4.61.1.15.1.2 | ColumnwlcLocalServicesProfileAdminStatus | read-write | current | The administrative status of this entry. The entry can be enabled(1), disabled(2) or set to delete(32) and is therefore deleted. Default is enabled(1). |
| 1.3.6.1.4.1.272.4.61.1.15.1.3 | ColumnwlcLocalServicesProfileName | read-write | current | The name of the ServicesProfile entry. |
| 1.3.6.1.4.1.272.4.61.1.15.1.4 | ColumnwlcLocalServicesProfilePort | read-write | current | The port number. |
| 1.3.6.1.4.1.272.4.61.1.15.1.5 | ColumnwlcLocalServicesProfilePortRange | read-write | current | The port range. |
| 1.3.6.1.4.1.272.4.61.1.15.1.6 | ColumnwlcLocalServicesProfileProtocol | read-write | current | The protocol type of this entry. |
| 1.3.6.1.4.1.272.4.61.1.16 | TablewlcWlanIfTable | not-accessible | current | The wlcWlanIfTable contains all WLAN interfaces of each WTP with their configured profiles. |
| 1.3.6.1.4.1.272.4.61.1.16.1 | RowwlcWlanIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.16.1.1 | ColumnwlcWlanIfIndex | read-write | current | Unique index which is incremented for each new WLAN interface entry. |
| 1.3.6.1.4.1.272.4.61.1.16.1.2 | ColumnwlcWlanIfWTPIndex | read-only | current | The wlcWlanIfWTPIndex is the uniqe WTP index see wlcWTPIndex. |
| 1.3.6.1.4.1.272.4.61.1.16.1.3 | ColumnwlcWlanIfWTPMacAddress | read-only | current | wlcWlanIfWTPMacAddress is the first ethernet MAC address of the WTP. |
| 1.3.6.1.4.1.272.4.61.1.16.1.4 | ColumnwlcWlanIfProfIndex | read-write | current | The wlcWlanIfProfIndex is the configured WLAN interface profile. See wlcWlanIfProfileIndex. |
| 1.3.6.1.4.1.272.4.61.1.16.1.5 | ColumnwlcWlanIfType | read-write | current | The current WLAN physical interface type for the WTP off(1) interface disabled access-point(2) access point client(3) client mode default(4) the type of the co… |
| 1.3.6.1.4.1.272.4.61.1.16.1.6 | ColumnwlcWlanIfChannel | read-write | current | The physical channel. |
| 1.3.6.1.4.1.272.4.61.1.16.1.7 | ColumnwlcWlanIfAutoSelectedChannel | read-only | current | The auto selected channel. |
| 1.3.6.1.4.1.272.4.61.1.16.1.8 | ColumnwlcWlanIfSecondaryChannel | read-write | current | The wlcWlanIfSecondaryChannel describes if the secondary channel (40Mhz bandwidth) is below(1) or above(2) of the current selected channel. |
| 1.3.6.1.4.1.272.4.61.1.16.1.9 | ColumnwlcWlanIfAutoSecondaryChannel | read-only | current | The wlcWlanIfAutoSecondaryChannel describes if the secondary channel (40Mhz bandwidth) is below(1) or above(2) of the auto selected channel. |
| 1.3.6.1.4.1.272.4.61.1.16.1.10 | ColumnwlcWlanIfTxPower | read-write | current | Transmitter output power in dBm. |
| 1.3.6.1.4.1.272.4.61.1.16.1.11 | ColumnwlcWlanIfClientScanState | read-write | current | This attribute holds the foreground scanning status. Writing scanning(2) in idle state triggers a new foreground scan cycle. All entries for this client interf… |
| 1.3.6.1.4.1.272.4.61.1.16.1.12 | ColumnwlcWlanIfClientIndex | read-write | current | Index pointer to the wlcClientProfileTable. |
| 1.3.6.1.4.1.272.4.61.1.16.1.13 | ColumnwlcWlanIfHWIndex | read-write | current | Index pointer to the wlcWlanHWTable. |
| 1.3.6.1.4.1.272.4.61.1.16.1.14 | ColumnwlcWlanIfRadioIndexWTP | read-write | current | WLAN interface index on the WTP. |
| 1.3.6.1.4.1.272.4.61.1.17 | TablewlcWlanIfProfileTable | not-accessible | current | This table contains WLAN interface profiles. |
| 1.3.6.1.4.1.272.4.61.1.17.1 | RowwlcWlanIfProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.17.1.1 | ColumnwlcWlanIfProfileIndex | read-write | current | Unique index of a WIFI interface profile. |
| 1.3.6.1.4.1.272.4.61.1.17.1.2 | ColumnwlcWlanIfProfileName | read-write | current | The name of the requested profile. |
| 1.3.6.1.4.1.272.4.61.1.17.1.3 | ColumnwlcWlanIfProfileType | read-write | current | The WLAN physical interface type: off(1) interface disabled access-point(2) access point client(3) client mode delete(32) delete |
| 1.3.6.1.4.1.272.4.61.1.17.1.4 | ColumnwlcWlanIfProfileMode | read-write | current | Mixed and compatibility modes between various 802.11 substandards. |
| 1.3.6.1.4.1.272.4.61.1.17.1.5 | ColumnwlcWlanIfProfileSpeed | read-write | current | The value defines the bitrate or the coding scheme to use for data frames. Default value auto(31) enables automatic rate adaption. |
| 1.3.6.1.4.1.272.4.61.1.17.1.6 | ColumnwlcWlanIfProfileSkipChannels24GHz | read-write | current | If a bit is set the according channel will be skipped from the channel scan list (channel 1-14 for 2.4 GHz). Default is to scan all channels (i.e. no bit is se… |
| 1.3.6.1.4.1.272.4.61.1.17.1.7 | ColumnwlcWlanIfProfileSkipChannels5GHz | read-write | current | If a bit is set the accordingly channel will be skipped from the channel scan list (channel 36-173 for 5 GHz). Default is to scan all channels (i.e. no bit is … |
| 1.3.6.1.4.1.272.4.61.1.17.1.8 | ColumnwlcWlanIfProfileRtsThreshold | read-write | current | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross mo… |
| 1.3.6.1.4.1.272.4.61.1.17.1.9 | ColumnwlcWlanIfProfileFragmentationThreshold | read-write | current | This attribute shall specify the current maximum size, in octets, of the PSDU that may be delivered to the PHY. This maximum size does not apply in the case of… |
| 1.3.6.1.4.1.272.4.61.1.17.1.10 | ColumnwlcWlanIfProfileBurst | read-write | current | Sending wireless frames without backoff time. |
| 1.3.6.1.4.1.272.4.61.1.17.1.11 | ColumnwlcWlanIfProfileCountry | read-write | current | This attribute identifies the country in which the station is operating. The first two octets of this string are the two character country code as described in… |
| 1.3.6.1.4.1.272.4.61.1.17.1.12 | ColumnwlcWlanIfProfileBand | read-write | current | Frequency band. 'b24-GHz' -> 2.4 GHz band, 'b5-GHz' -> 5 GHz band, 'b58-GHz' -> 5.8 GHz band, 'b24-5-GHz' -> 2.4 GHz and 5 GHz band. |
| 1.3.6.1.4.1.272.4.61.1.17.1.13 | ColumnwlcWlanIfProfileAckWindow | read-write | current | Additional 802.11 ACK timeout in microseconds. This must be set to non-zero value for radio distances larger than about 700m. Recommended setting is about 10 m… |
| 1.3.6.1.4.1.272.4.61.1.17.1.14 | ColumnwlcWlanIfProfileBeaconPeriod | read-write | current | This attribute contains the number of TU that this BSS uses for scheduling Beacon transmissions. |
| 1.3.6.1.4.1.272.4.61.1.17.1.15 | ColumnwlcWlanIfProfileDTIMPeriod | read-write | current | The number of DTIM intervals between the start of CFPs for this BSS. |
| 1.3.6.1.4.1.272.4.61.1.17.1.16 | ColumnwlcWlanIfProfileSpatialStreams | read-write | current | This attribute indicates the maximum number of spatial streams enabled. The default value of this attribute is 3. |
| 1.3.6.1.4.1.272.4.61.1.17.1.17 | ColumnwlcWlanIfProfileGreenfield | read-write | current | This attribute, when TRUE, indicates that the HT Greenfield option is enabled. The default value of this attribute is FALSE. |
| 1.3.6.1.4.1.272.4.61.1.17.1.18 | ColumnwlcWlanIfProfileShortGI | read-write | current | This attribute, when TRUE, indicates that the Short Guard option is enabled for 40 MHz operation. The default value of this attribute is FALSE. |
| 1.3.6.1.4.1.272.4.61.1.17.1.19 | ColumnwlcWlanIfProfileRxSTBC | read-write | current | This attribute, when TRUE, indicates that the entity's capability of receiving frames that are sent using the Space-Time Block Code (STBC) is enabled. The defa… |
| 1.3.6.1.4.1.272.4.61.1.17.1.20 | ColumnwlcWlanIfProfileTxSTBC | read-write | current | This attribute, when TRUE, indicates that the entity's capability of transmitting frames using Space-Time Block Code (STBC) option is enabled. The default valu… |
| 1.3.6.1.4.1.272.4.61.1.17.1.21 | ColumnwlcWlanIfProfileFortyMHzOperation | read-write | current | This attribute, when TRUE, indicates that the 40 MHz Operation is enabled. The default value of this attribute is FALSE. |
| 1.3.6.1.4.1.272.4.61.1.17.1.22 | ColumnwlcWlanIfProfileShortRetry | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is less than or equal to dot11RTSThreshold, that shal… |
| 1.3.6.1.4.1.272.4.61.1.17.1.23 | ColumnwlcWlanIfProfileLongRetry | read-write | current | This attribute shall indicate the maximum number of transmission attempts of a frame, the length of which is greater than dot11RTSThreshold, that shall be made… |
| 1.3.6.1.4.1.272.4.61.1.17.1.24 | ColumnwlcWlanIfProfileBgScanning | read-write | current | Enable/disable background-scanning. |
| 1.3.6.1.4.1.272.4.61.1.17.1.25 | ColumnwlcWlanIfProfileAirtimeFairness | read-write | current | If AirtimeFairness is enabled(1), background or best-effort traffic sent from AP to STA is fairly scheduled among all stations associated to this radio profile… |
| 1.3.6.1.4.1.272.4.61.1.18 | TablewlcClientProfileTable | not-accessible | current | This table contains WTP radio client profiles. |
| 1.3.6.1.4.1.272.4.61.1.18.1 | RowwlcClientProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.18.1.1 | ColumnwlcClientProfileIndex | read-write | current | Unique Client profile index. |
| 1.3.6.1.4.1.272.4.61.1.18.1.2 | ColumnwlcClientProfileScanPeriodAMin | read-write | current | Minimum time in ms to spend on a frequency when active scanning. Default is 10ms. |
| 1.3.6.1.4.1.272.4.61.1.18.1.3 | ColumnwlcClientProfileScanPeriodAMax | read-write | current | Maximum time in ms to spend on a frequency when active scanning. Default is 40ms. |
| 1.3.6.1.4.1.272.4.61.1.18.1.4 | ColumnwlcClientProfileScanPeriodMin | read-write | current | Minimum time in ms to spend on a frequency when passive scanning. Default is 20ms. |
| 1.3.6.1.4.1.272.4.61.1.18.1.5 | ColumnwlcClientProfileScanPeriodMax | read-write | current | Maximum time in ms to spend on a frequency when passive scanning. Default is 120ms. |
| 1.3.6.1.4.1.272.4.61.1.18.1.7 | ColumnwlcClientProfileAdminStatus | read-write | current | Enable or delte the requested WLAN client profile. |
| 1.3.6.1.4.1.272.4.61.1.19 | TablewlcVSSTable | not-accessible | current | This table combines WTP with the VSS profile. |
| 1.3.6.1.4.1.272.4.61.1.19.1 | RowwlcVSSEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.19.1.1 | ColumnwlcVSSIndex | read-write | current | This variable contains a unique index. |
| 1.3.6.1.4.1.272.4.61.1.19.1.2 | ColumnwlcVSSwlanIfIndex | read-write | current | This variable is the WLAN interface of the requested WTP WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.19.1.3 | ColumnwlcVSSProfIndex | read-write | current | This variable contains the unique VSS profile index. |
| 1.3.6.1.4.1.272.4.61.1.19.1.4 | ColumnwlcVSSAdminStatus | read-write | current | Enable or delete the VSS profile from the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.20 | TablewlcVSSProfileTable | not-accessible | current | This table contains different VSS setting profiles. |
| 1.3.6.1.4.1.272.4.61.1.20.1 | RowwlcVSSProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.20.1.1 | ColumnwlcVSSProfileIndex | read-write | current | Unique VSS profile index. |
| 1.3.6.1.4.1.272.4.61.1.20.1.2 | ColumnwlcVSSProfileId | read-write | current | This attribute reflects the Service Set ID used in the DesiredSSID parameter of the most recent MLME scan request. |
| 1.3.6.1.4.1.272.4.61.1.20.1.3 | ColumnwlcVSSProfileName | read-write | current | The VSS profile name. |
| 1.3.6.1.4.1.272.4.61.1.20.1.4 | ColumnwlcVSSProfileAdminStatus | read-write | current | Enable, disable or delete the requested VSS profile. |
| 1.3.6.1.4.1.272.4.61.1.20.1.5 | ColumnwlcVSSProfileSecurity | read-write | current | The Security Option which will be used. wep40 and wep104:= WEP-Authentication wpa-psk := WPA-Authentication with PSK wpa := WPA-Authentication with radius (802… |
| 1.3.6.1.4.1.272.4.61.1.20.1.6 | ColumnwlcVSSProfileDefaultKey | read-write | current | Default key for WEP encryption. |
| 1.3.6.1.4.1.272.4.61.1.20.1.7 | ColumnwlcVSSProfileKey1 | read-write | current | Key string for WEP key no. 1. Also used for WPA passphrase. |
| 1.3.6.1.4.1.272.4.61.1.20.1.8 | ColumnwlcVSSProfileKey2 | read-write | current | Key string for WEP key no. 2. |
| 1.3.6.1.4.1.272.4.61.1.20.1.9 | ColumnwlcVSSProfileKey3 | read-write | current | Key string for WEP key no. 3. |
| 1.3.6.1.4.1.272.4.61.1.20.1.10 | ColumnwlcVSSProfileKey4 | read-write | current | Key string for WEP key no. 4. |
| 1.3.6.1.4.1.272.4.61.1.20.1.11 | ColumnwlcVSSProfileTotal | read-write | current | The number of allowed clients of the requested VSS. |
| 1.3.6.1.4.1.272.4.61.1.20.1.12 | ColumnwlcVSSProfileMAC | read-write | current | MAC Media Access Control via MAC Address. |
| 1.3.6.1.4.1.272.4.61.1.20.1.13 | ColumnwlcVSSProfileLocal | read-write | current | Routing between connected Clients. |
| 1.3.6.1.4.1.272.4.61.1.20.1.14 | ColumnwlcVSSProfileHidden | read-write | current | Define whether SSID is hidden (true) or not (false). Default value is false. |
| 1.3.6.1.4.1.272.4.61.1.20.1.15 | ColumnwlcVSSProfileWPAUnicastCipher | read-write | current | The set of unicast ciphers used for WPA. |
| 1.3.6.1.4.1.272.4.61.1.20.1.16 | ColumnwlcVSSProfileRSNUnicastCipher | read-write | current | The set of unicast ciphers used for RSN. |
| 1.3.6.1.4.1.272.4.61.1.20.1.17 | ColumnwlcVSSProfileWpaMixedMode | read-write | current | Allows mixed operation of WPA and WPA2 by value wpaandwpa2(3) (default value). For tightened security, value wpa2(2) can be selected. The value wpa(1) is avail… |
| 1.3.6.1.4.1.272.4.61.1.20.1.18 | ColumnwlcVSSProfileRsnPreauthentication | read-write | current | When this object is set to TRUE, this shall indicate that RSNA preauthentication is enabled on this entity. This object requires that dot11RSNAEnabled also be … |
| 1.3.6.1.4.1.272.4.61.1.20.1.19 | ColumnwlcVSSProfileWMM | read-write | current | This object defines whether WMM (Wi-Fi Multimedia) is active for this service set. Depending on the WLAN hardware and driver, WMM might only be allowed for one… |
| 1.3.6.1.4.1.272.4.61.1.20.1.20 | ColumnwlcVSSProfileARPProcessing | read-write | current | This object defines whether ARP processing is active for this service set or not. ARP processing is a feature to reduce the number of ARP broadcast packets. If… |
| 1.3.6.1.4.1.272.4.61.1.20.1.21 | ColumnwlcVSSProfileVlanId | read-write | current | The VLAN-Tag-Id used for the virtual interface. |
| 1.3.6.1.4.1.272.4.61.1.20.1.22 | ColumnwlcVSSProfileSoftTotal | read-write | current | If wlcVSSProfileSoftTotal STAs are connected to this VSS, subsequent association attempts will be rejected with BUSY. If a STA still tries to associate within … |
| 1.3.6.1.4.1.272.4.61.1.20.1.23 | ColumnwlcVSSProfileBandSteeringPreference | read-write | current | Define the preferred band for Band Steering. none : no preference (default) b24-GHz: prefer 2,4 GHz b5-GHz : prefer 5 GHz |
| 1.3.6.1.4.1.272.4.61.1.20.1.24 | ColumnwlcVSSProfileBlacklist | read-write | current | Enable or disable blacklisting via MAC addresses. |
| 1.3.6.1.4.1.272.4.61.1.20.1.25 | ColumnwlcVSSProfileUAPSD | read-write | current | Enable or disable UAPSD |
| 1.3.6.1.4.1.272.4.61.1.20.1.26 | ColumnwlcVSSProfileStaRxShaping | read-write | current | STA to AP bandwidth limitation per associated station. The value is given in bits per seconds, -1 is unlimited (default) |
| 1.3.6.1.4.1.272.4.61.1.20.1.27 | ColumnwlcVSSProfileStaTxShaping | read-write | current | AP to STA bandwidth limitation per associated station. The value is given in bits per seconds, -1 is unlimited (default) |
| 1.3.6.1.4.1.272.4.61.1.21 | TablewlcACLProfileTable | not-accessible | current | This table contains different ACL profiles. The WLAN Access List is based on MAC Addresses. |
| 1.3.6.1.4.1.272.4.61.1.21.1 | RowwlcACLProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.21.1.1 | ColumnwlcACLProfileIndex | read-write | current | The variable is the unique profile index. |
| 1.3.6.1.4.1.272.4.61.1.21.1.2 | ColumnwlcACLProfileAddress | read-write | current | The MAC Address for the accepted client. |
| 1.3.6.1.4.1.272.4.61.1.21.1.3 | ColumnwlcACLProfileAdminStatus | read-write | current | Enable, disable or delete the requested ACL profile entry. |
| 1.3.6.1.4.1.272.4.61.1.22 | NodewlcACStat | |||
| 1.3.6.1.4.1.272.4.61.1.22.1 | ScalarwlcACStatNoWTPManaged | read-only | current | Number of managed WTPs. |
| 1.3.6.1.4.1.272.4.61.1.22.2 | ScalarwlcACStatNoWTPDiscovered | read-only | current | Number of discovered WTPs. |
| 1.3.6.1.4.1.272.4.61.1.22.3 | ScalarwlcACStatTxPackets | read-only | current | Number of transmitted packets. |
| 1.3.6.1.4.1.272.4.61.1.22.4 | ScalarwlcACStatTxBytes | read-only | current | Number of transmitted bytes. |
| 1.3.6.1.4.1.272.4.61.1.22.5 | ScalarwlcACStatRxPackets | read-only | current | Number of received packets. |
| 1.3.6.1.4.1.272.4.61.1.22.6 | ScalarwlcACStatRxBytes | read-only | current | Number of received bytes. |
| 1.3.6.1.4.1.272.4.61.1.22.7 | ScalarwlcACStatRetransmissions | read-only | current | Number of retransmissions. |
| 1.3.6.1.4.1.272.4.61.1.23 | TablewlcWTPInfoTable | not-accessible | current | The table contains different information of each WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1 | RowwlcWTPInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.23.1.1 | ColumnwlcWTPInfoIndex | read-only | current | Unique WTP information index. |
| 1.3.6.1.4.1.272.4.61.1.23.1.2 | ColumnwlcWTPInfoWTPIndex | read-only | current | Unique WTP index. |
| 1.3.6.1.4.1.272.4.61.1.23.1.3 | ColumnwlcWTPInfoMacAddress | read-only | current | The first ethernet MAC address of the WTPs. |
| 1.3.6.1.4.1.272.4.61.1.23.1.4 | ColumnwlcWTPInfoState | read-only | current | Reflects the current (CAPWAP) state of the WTP. idle(1) - WTP is idle (isn't seen by AC) discovery(2) - WTP is discovered by AC authorize(3) - WTP is waiting t… |
| 1.3.6.1.4.1.272.4.61.1.23.1.5 | ColumnwlcWTPInfoDevice | read-only | current | The official WTP device name. |
| 1.3.6.1.4.1.272.4.61.1.23.1.6 | ColumnwlcWTPInfoSerialNo | read-only | current | The unique serial number of the WTP |
| 1.3.6.1.4.1.272.4.61.1.23.1.7 | ColumnwlcWTPInfoSwVer | read-only | current | Current software version of the WTP |
| 1.3.6.1.4.1.272.4.61.1.23.1.8 | ColumnwlcWTPInfoInetAddressType | read-only | current | The IP address type of the WTP. It is one of: -unknown(0): an unknown address type -ipv4(1) : an IPv4 address -ipv6(2) : an IPv6 address -ipv4z(3) : a non-glob… |
| 1.3.6.1.4.1.272.4.61.1.23.1.9 | ColumnwlcWTPInfoInetAddress | read-only | current | IP address of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.10 | ColumnwlcWTPInfoNoRadios | read-only | current | Number of radios that the device has. |
| 1.3.6.1.4.1.272.4.61.1.23.1.11 | ColumnwlcWTPInfoConnectTime | read-only | current | This attribute records the time since last state change. |
| 1.3.6.1.4.1.272.4.61.1.23.1.12 | ColumnwlcWTPInfoTxPackets | read-only | current | The transmitted packets of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.13 | ColumnwlcWTPInfoTxBytes | read-only | current | Number of transmitted bytes of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.14 | ColumnwlcWTPInfoRxPackets | read-only | current | Number of received packets of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.15 | ColumnwlcWTPInfoRxBytes | read-only | current | Number of received bytes of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.16 | ColumnwlcWTPInfoRetransmissions | read-only | current | Number of retransmissions of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.23.1.17 | ColumnwlcWTPInfoLastSeen | read-only | current | On Ac this is the timestamp of the last receved CAPWAP UDP packet from that WTP. On WTP this is the timestamp of the last received CAPWAP UDP packet from AC. |
| 1.3.6.1.4.1.272.4.61.1.24 | TablewlcWlanHWTable | not-accessible | current | This table lists all features of supported wireless cards. |
| 1.3.6.1.4.1.272.4.61.1.24.1 | RowwlcWlanHWEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.24.1.1 | ColumnwlcWlanHWIndex | read-only | current | Unique WLAN hardware index. |
| 1.3.6.1.4.1.272.4.61.1.24.1.2 | ColumnwlcWlanHWName | read-only | current | Name of the WLAN hardware. |
| 1.3.6.1.4.1.272.4.61.1.24.1.3 | ColumnwlcWlanHWTxPowerSteps | read-only | current | The steps of the TX power the wireless card supports. |
| 1.3.6.1.4.1.272.4.61.1.24.1.4 | ColumnwlcWlanHWShortRetries | read-only | current | This variable says if the wireless card supports the configuration of the short retry value or not. Default is false. |
| 1.3.6.1.4.1.272.4.61.1.24.1.5 | ColumnwlcWlanHWLongRetries | read-only | current | This variable says if the wireless card supports the configuration of the long retry value or not. Default is false. |
| 1.3.6.1.4.1.272.4.61.1.24.1.6 | ColumnwlcWlanHWFragmentationThreshold | read-only | current | This variable says if the wireless card supports the configuration of the fragmentation threshold value or not. |
| 1.3.6.1.4.1.272.4.61.1.24.1.7 | ColumnwlcWlanHWNoSpatialRx | read-only | current | This attribute indicates the number of receivable spatial streams. |
| 1.3.6.1.4.1.272.4.61.1.24.1.8 | ColumnwlcWlanHWNoSpatialTx | read-only | current | This attribute indicates the maximum of transmittable spatial streams. |
| 1.3.6.1.4.1.272.4.61.1.24.1.9 | ColumnwlcWlanHWBands | read-only | current | The supported WLAN bands. |
| 1.3.6.1.4.1.272.4.61.1.24.1.10 | ColumnwlcWlanHWModes | read-only | current | The Supported WLAN modes. |
| 1.3.6.1.4.1.272.4.61.1.24.1.11 | ColumnwlcWlanHWBandwidth | read-only | current | The supported bandwidth capabilities of the radio. In case of false only 20MHz bandwidth is supported. In case of true also 40MHz bandwidth is supported. |
| 1.3.6.1.4.1.272.4.61.1.24.1.12 | ColumnwlcWlanHWShortGI | read-only | current | This attribute, when TRUE, indicates that the Short Guard option is implemented. The default value of this attribute is FALSE. |
| 1.3.6.1.4.1.272.4.61.1.24.1.13 | ColumnwlcWlanHWGreenfield | read-only | current | This attribute, when TRUE, indicates that the HT Greenfield option is implemented. The default value of this attribute is FALSE. |
| 1.3.6.1.4.1.272.4.61.1.24.1.14 | ColumnwlcWlanHWRxSTBC | read-only | current | This attribute, when TRUE, indicates that the entity is capable of receiving frames that are sent using the Space-Time Block Code (STBC). The default value of … |
| 1.3.6.1.4.1.272.4.61.1.24.1.15 | ColumnwlcWlanHWTxSTBC | read-only | current | This attribute, when TRUE, indicates that the entity is capable of transmitting frames using Space-Time Block Code (STBC) option. The default value of this att… |
| 1.3.6.1.4.1.272.4.61.1.24.1.16 | ColumnwlcWlanHWSkipModes | read-only | current | This variable says which modes of the WlanIfSkipChannels the wireless card supports. |
| 1.3.6.1.4.1.272.4.61.1.25 | TablewlcWlanIfStatTable | not-accessible | current | This table contains the current settings and statistics of each WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1 | RowwlcWlanIfStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.25.1.1 | ColumnwlcWlanIfStatIndex | read-only | current | Uniqe WLAN interface statistic index. |
| 1.3.6.1.4.1.272.4.61.1.25.1.2 | ColumnwlcWlanIfStatChannel | read-only | current | Current selected channel of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.3 | ColumnwlcWlanIfStatSecondaryChannel | read-only | current | Current secondary channel of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.4 | ColumnwlcWlanIfStatAddress | read-only | current | The MAC address of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.5 | ColumnwlcWlanIfStatType | read-only | current | The type which is setup for the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.6 | ColumnwlcWlanIfStatBand | read-only | current | The current operation band of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.7 | ColumnwlcWlanIfStatMode | read-only | current | The current operation mode of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.8 | ColumnwlcWlanIfStatTxPower | read-only | current | The current transmit power of the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.9 | ColumnwlcWlanIfStatFortyMHzOperation | read-only | current | This variable is TRUE if the requested WLAN interface currently operates with 40MHz bandwidth. |
| 1.3.6.1.4.1.272.4.61.1.25.1.10 | ColumnwlcWlanIfStatShortGI | read-only | current | This variable is TRUE if the short guard interval is currently enabled on the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.11 | ColumnwlcWlanIfStatNoSpatialEnabled | read-only | current | Number of enabled spatial stream on the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.12 | ColumnwlcWlanIfStatGreenfield | read-only | current | This variable is TRUE if the green field option is currently enabled on the requested WLAN interface. |
| 1.3.6.1.4.1.272.4.61.1.25.1.13 | ColumnwlcWlanIfStatTxPackets | read-only | current | Number of transmitted packets. |
| 1.3.6.1.4.1.272.4.61.1.25.1.14 | ColumnwlcWlanIfStatTxBytes | read-only | current | Number of transmitted bytes. |
| 1.3.6.1.4.1.272.4.61.1.25.1.15 | ColumnwlcWlanIfStatTxDropped | read-only | current | Number of dropped packets in transmit direction. |
| 1.3.6.1.4.1.272.4.61.1.25.1.16 | ColumnwlcWlanIfStatRxPackets | read-only | current | Number of received packets. |
| 1.3.6.1.4.1.272.4.61.1.25.1.17 | ColumnwlcWlanIfStatRxBytes | read-only | current | Number of received bytes. |
| 1.3.6.1.4.1.272.4.61.1.25.1.18 | ColumnwlcWlanIfStatRxErrors | read-only | current | This variable is counting packets that were not received correctly. |
| 1.3.6.1.4.1.272.4.61.1.25.1.19 | ColumnwlcWlanIfStatAssociated | read-only | current | Number of currently associated clients. |
| 1.3.6.1.4.1.272.4.61.1.25.1.20 | ColumnwlcWlanIfStatOperState | read-only | current | This attribute reflects the operational state of the corresponding WLAN card. 'true' -> radio is enabled, 'false' -> radio is disabled. |
| 1.3.6.1.4.1.272.4.61.1.26 | TablewlcVSSStatTable | not-accessible | current | This table contains statistic information about each VSS. |
| 1.3.6.1.4.1.272.4.61.1.26.1 | RowwlcVSSStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.26.1.1 | ColumnwlcVSSStatVSSIndex | read-only | current | The unique VSS index. |
| 1.3.6.1.4.1.272.4.61.1.26.1.2 | ColumnwlcVSSStatCurrent | read-only | current | Number of currently associated stations. |
| 1.3.6.1.4.1.272.4.61.1.26.1.3 | ColumnwlcVSSStatBytesTx | read-only | current | Transmitted Bytes. |
| 1.3.6.1.4.1.272.4.61.1.26.1.4 | ColumnwlcVSSStatBytesRx | read-only | current | Received Bytes. |
| 1.3.6.1.4.1.272.4.61.1.26.1.5 | ColumnwlcVSSStatBSSID | read-only | current | This object contains the current BSSID for the service set. |
| 1.3.6.1.4.1.272.4.61.1.26.1.6 | ColumnwlcVSSStatOperState | read-only | current | This object contains the current OperState for the service set. |
| 1.3.6.1.4.1.272.4.61.1.26.1.7 | ColumnwlcVSSStatSoftTotalDenied | read-only | current | Number of rejected clients due to wlcVSSProfileSoftTotal limit. |
| 1.3.6.1.4.1.272.4.61.1.26.1.8 | ColumnwlcVSSStatBSMovements | read-only | current | Number of clients moved to other band by band steering mechanism. |
| 1.3.6.1.4.1.272.4.61.1.26.1.9 | ColumnwlcVSSStatClearCounter | read-write | current | counting := accounting is active, clearing := clear all statistics |
| 1.3.6.1.4.1.272.4.61.1.26.1.10 | ColumnwlcVSSStatTotalDenied | read-only | current | Number of rejected clients due to wlcVSSProfileTotal limit. |
| 1.3.6.1.4.1.272.4.61.1.27 | TablewlcScanResultsTable | not-accessible | current | This table contains the list of BSS entries found by foreground or background scanning. |
| 1.3.6.1.4.1.272.4.61.1.27.1 | RowwlcScanResultsEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.27.1.1 | ColumnwlcScanResultsIndex | read-only | current | Auxiliary index for different BSS entries. |
| 1.3.6.1.4.1.272.4.61.1.27.1.2 | ColumnwlcScanResultswlanIfIndex | read-only | current | Index of WLAN Interface the scan results belong to. |
| 1.3.6.1.4.1.272.4.61.1.27.1.3 | ColumnwlcScanResultsBSSID | read-only | current | BSSID of this BSS. |
| 1.3.6.1.4.1.272.4.61.1.27.1.4 | ColumnwlcScanResultsRSSI | read-only | current | Receive signal strength of this BSS. |
| 1.3.6.1.4.1.272.4.61.1.27.1.5 | ColumnwlcScanResultsSSID | read-only | current | SSID aka network name of this BSS. If broadcasting of SSID is disabled on this BSS, this string may be empty. |
| 1.3.6.1.4.1.272.4.61.1.27.1.6 | ColumnwlcScanResultsChannel | read-only | current | The channel this BSS was received on. |
| 1.3.6.1.4.1.272.4.61.1.27.1.7 | ColumnwlcScanResultsPrivacy | read-only | current | This attribute contains the privacy type of the scanned device. |
| 1.3.6.1.4.1.272.4.61.1.27.1.8 | ColumnwlcScanResultsType | read-only | current | This attribute contains the device type of the scanned device. |
| 1.3.6.1.4.1.272.4.61.1.27.1.9 | ColumnwlcScanResultsWPAUnicastCipher | read-only | current | This attribute contains the WPA unicast ciphers of the scanned device. |
| 1.3.6.1.4.1.272.4.61.1.27.1.10 | ColumnwlcScanResultsRSNUnicastCipher | read-only | current | This attribute contains the RSN unicast ciphers of the scanned device. |
| 1.3.6.1.4.1.272.4.61.1.27.1.11 | ColumnwlcScanResultsAPType | read-only | current | This attribute contains the type of the scanned access point. 'own' -> managed AP, 'neighborhood' -> neighborhood AP 'rogue' -> foreign AP but with one of our … |
| 1.3.6.1.4.1.272.4.61.1.27.1.12 | ColumnwlcScanResultsLastSeen | read-only | current | This attribute contains that time when an access point or client was seen for the last time. |
| 1.3.6.1.4.1.272.4.61.1.28 | TablewlcStationTable | not-accessible | current | The wlcStationTable contains information relating to the clients currently associated to our WTPs. Each entry corresponds to an associated client station (STA)… |
| 1.3.6.1.4.1.272.4.61.1.28.1 | RowwlcStationEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.28.1.1 | ColumnwlcStationIndex | read-only | current | Unique station index. |
| 1.3.6.1.4.1.272.4.61.1.28.1.2 | ColumnwlcStationVSSIndex | read-only | current | The interface index of the associated Service Set. |
| 1.3.6.1.4.1.272.4.61.1.28.1.3 | ColumnwlcStationAddress | read-only | current | MAC Address of the Assigned STA. |
| 1.3.6.1.4.1.272.4.61.1.28.1.4 | ColumnwlcStationInetAddressType | read-only | current | The IP address type of the STA. |
| 1.3.6.1.4.1.272.4.61.1.28.1.5 | ColumnwlcStationInetAddress | read-only | current | This attribute shows the IP address of the client. It is only available if any IP frames have been received from the client. |
| 1.3.6.1.4.1.272.4.61.1.28.1.6 | ColumnwlcStationState | read-write | current | The current state of the station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.7 | ColumnwlcStationSecurity | read-only | current | The Security Option of the Station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.8 | ColumnwlcStationMSDUTx | read-only | current | This attribute counts the total number of packets transmitted to this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.9 | ColumnwlcStationMSDURx | read-only | current | This attribute counts the total number of packets received from this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.10 | ColumnwlcStationBytesTx | read-only | current | This attribute counts the total number of octets transmitted to this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.11 | ColumnwlcStationBytesRx | read-only | current | This attribute counts the total number of octets received from this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.12 | ColumnwlcStationRate | read-only | current | This attribute reflects the data rate of the latest packet received from this station, in 500 kbps units. |
| 1.3.6.1.4.1.272.4.61.1.28.1.13 | ColumnwlcStationSignal | read-only | current | This attribute shows the received signal strength in dBm. |
| 1.3.6.1.4.1.272.4.61.1.28.1.14 | ColumnwlcStationRSSI1 | read-only | current | This attribute shows the received signal strength at the first receiver in dBm. The value 0 indicates no connection. |
| 1.3.6.1.4.1.272.4.61.1.28.1.15 | ColumnwlcStationRSSI2 | read-only | current | This attribute shows the received signal strength at the second receiver in dBm. The value 0 indicates no connection or no second receiver present. |
| 1.3.6.1.4.1.272.4.61.1.28.1.16 | ColumnwlcStationRSSI3 | read-only | current | This attribute shows the received signal strength at the third receiver in dBm. The value 0 indicates no connection or no third receiver present. |
| 1.3.6.1.4.1.272.4.61.1.28.1.17 | ColumnwlcStationNoise | read-only | current | This attribute shows the measured noise level in dBm, or 0 if no connection can be established. |
| 1.3.6.1.4.1.272.4.61.1.28.1.18 | ColumnwlcStationUpTime | read-only | current | This attribute records the system uptime at the moment the client successfully finished association. |
| 1.3.6.1.4.1.272.4.61.1.28.1.19 | ColumnwlcStationRxBW40 | read-only | current | This attribute shows if the station is able to receive pakets with 40MHz bandwidth. |
| 1.3.6.1.4.1.272.4.61.1.28.1.20 | ColumnwlcStationRxShortGI | read-only | current | This attribute shows if the station is able to receive pakets with short guard interval. |
| 1.3.6.1.4.1.272.4.61.1.28.1.21 | ColumnwlcStationTxBW40 | read-only | current | This attribute shows if the station is able to transmit pakets with 40 MHz bandwidth. |
| 1.3.6.1.4.1.272.4.61.1.28.1.22 | ColumnwlcStationTxShortGI | read-only | current | This attribute shows if the station is able to transmit pakets with short guard interval. |
| 1.3.6.1.4.1.272.4.61.1.28.1.23 | ColumnwlcStationTxFrames11 | read-only | current | This attribute shows the number of data frames that were transmitted at 11 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.24 | ColumnwlcStationTxFrames24 | read-only | current | This attribute shows the number of data frames that were transmitted at 24 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.25 | ColumnwlcStationTxFrames54 | read-only | current | This attribute shows the number of data frames that were transmitted at 54 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.26 | ColumnwlcStationTxFramesMCS3 | read-only | current | This attribute shows the number of HT data frames that were transmitted at MCS 3. |
| 1.3.6.1.4.1.272.4.61.1.28.1.27 | ColumnwlcStationTxFramesMCS7 | read-only | current | This attribute shows the number of HT data frames that were transmitted at MCS 7. |
| 1.3.6.1.4.1.272.4.61.1.28.1.28 | ColumnwlcStationTxFramesMCS11 | read-only | current | This attribute shows the number of HT data frames that were transmitted at MCS 11. |
| 1.3.6.1.4.1.272.4.61.1.28.1.29 | ColumnwlcStationTxFramesMCS15 | read-only | current | This attribute shows the number of HT data frames that were transmitted at MCS 15. |
| 1.3.6.1.4.1.272.4.61.1.28.1.30 | ColumnwlcStationRxFrames11 | read-only | current | This attribute shows the number of data frames that were received at 11 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.31 | ColumnwlcStationRxFrames24 | read-only | current | This attribute shows the number of data frames that were received at 24 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.32 | ColumnwlcStationRxFrames54 | read-only | current | This attribute shows the number of data frames that were received at 54 Mbps. |
| 1.3.6.1.4.1.272.4.61.1.28.1.33 | ColumnwlcStationRxFramesMCS3 | read-only | current | This attribute shows the number of HT data frames that were received at MCS 3. |
| 1.3.6.1.4.1.272.4.61.1.28.1.34 | ColumnwlcStationRxFramesMCS7 | read-only | current | This attribute shows the number of HT data frames that were received at MCS 7. |
| 1.3.6.1.4.1.272.4.61.1.28.1.35 | ColumnwlcStationRxFramesMCS11 | read-only | current | This attribute shows the number of HT data frames that were received at MCS 11. |
| 1.3.6.1.4.1.272.4.61.1.28.1.36 | ColumnwlcStationRxFramesMCS15 | read-only | current | This attribute shows the number of HT data frames that were received at MCS 15. |
| 1.3.6.1.4.1.272.4.61.1.28.1.37 | ColumnwlcStationRxAirtime | read-only | current | Accumulated estimated time in microseconds for all unidirectional frames received from this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.38 | ColumnwlcStationTxAirtime | read-only | current | Accumulated estimated time in microseconds for all unidirectional frames transmitted to this station. |
| 1.3.6.1.4.1.272.4.61.1.28.1.39 | ColumnwlcStationLastSeen | read-only | current | Timestamp of the last received frame by this Station |
| 1.3.6.1.4.1.272.4.61.1.28.1.40 | ColumnwlcStationRxDiscards | read-only | current | Count of discarded bytes due to bandwidth limitation. |
| 1.3.6.1.4.1.272.4.61.1.28.1.41 | ColumnwlcStationTxDiscards | read-only | current | Count of discarded bytes due to bandwidth limitation. |
| 1.3.6.1.4.1.272.4.61.1.29 | TablewlcACLDeniedTable | not-accessible | current | Contains all MAC Addresses of denied clients. |
| 1.3.6.1.4.1.272.4.61.1.29.1 | RowwlcACLDeniedEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.29.1.1 | ColumnwlcACLDeniedIndex | read-only | current | Unique index of the denied client. |
| 1.3.6.1.4.1.272.4.61.1.29.1.2 | ColumnwlcACLDeniedVSSIndex | read-only | current | VSS interface index where the denied client blongs to. |
| 1.3.6.1.4.1.272.4.61.1.29.1.3 | ColumnwlcACLDeniedAddress | read-only | current | The MAC Address of the denied Client. |
| 1.3.6.1.4.1.272.4.61.1.29.1.4 | ColumnwlcACLDeniedCount | read-only | current | The count of detected denials of this MAC Address. |
| 1.3.6.1.4.1.272.4.61.1.29.1.5 | ColumnwlcACLDeniedAge | read-only | current | The Age of the last denial. |
| 1.3.6.1.4.1.272.4.61.1.30 | TablewlcKnownAPTable | not-accessible | current | This table contains a list of known AP's and how they should be handled. |
| 1.3.6.1.4.1.272.4.61.1.30.1 | RowwlcKnownAPEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.30.1.1 | ColumnwlcKnownAPBSSID | read-create | current | The BSSID of the rouge AP. |
| 1.3.6.1.4.1.272.4.61.1.30.1.2 | ColumnwlcKnownAPLastSeen | read-only | current | The timestamp, when this known AP was last seen. |
| 1.3.6.1.4.1.272.4.61.1.30.1.3 | ColumnwlcKnownAPType | read-write | current | This attribute contains the type of the well known AP. If it is set to 'neighborhood' but the found AP is also a rogue the rogue message will still be displaye… |
| 1.3.6.1.4.1.272.4.61.1.30.1.4 | ColumnwlcKnownAPDescription | read-write | current | A user defined description for this known AP. |
| 1.3.6.1.4.1.272.4.61.1.31 | TablewlcVSSAuthProfileTable | not-accessible | current | This table contains the different VSS Authentication profiles. |
| 1.3.6.1.4.1.272.4.61.1.31.1 | RowwlcVSSAuthProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.31.1.1 | ColumnwlcVSSAuthProfileWlcVSSProfIndex | read-create | current | Reference to VSS Profile entry (wlcVSSProfileIndex) this authentication parameters correspond to. |
| 1.3.6.1.4.1.272.4.61.1.31.1.2 | ColumnwlcVSSAuthProfileReAuthPeriod | read-write | current | EAP reauthentication period in seconds (0=disabled). |
| 1.3.6.1.4.1.272.4.61.1.31.1.3 | ColumnwlcVSSAuthProfileGroupRekeyStrict | read-write | current | Rekey GTK when any STA that possesses the current GTK is leaving the BSS. |
| 1.3.6.1.4.1.272.4.61.1.31.1.4 | ColumnwlcVSSAuthProfileGroupRekeyTime | read-write | current | Time interval for rekeying GTK in seconds. |
| 1.3.6.1.4.1.272.4.61.1.31.1.5 | ColumnwlcVSSAuthProfileBlacklistTrials | read-write | current | The number of failed authentication trials per wlcVSSAuthProfileBlacklistTime before a station is stored into the dynamic blacklist. |
| 1.3.6.1.4.1.272.4.61.1.31.1.6 | ColumnwlcVSSAuthProfileBlacklistTime | read-write | current | The time within a station may perform wlcVSSAuthPRofileBlacklistTrials failed authentication trials, before it is temporatily blacklisted. |
| 1.3.6.1.4.1.272.4.61.1.31.1.7 | ColumnwlcVSSAuthProfileBlacklistDuration | read-write | current | The time a station is kept in the dynamic blacklist after too many failed authentication attempts. A value of 0 indicates forever. |
| 1.3.6.1.4.1.272.4.61.1.32 | TablewlcStaticBlacklistProfileTable | not-accessible | current | The wlcStaticBlacklistProfile contains information about stations that are blacklisted due to administrative actions. |
| 1.3.6.1.4.1.272.4.61.1.32.1 | RowwlcStaticBlacklistProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.32.1.1 | ColumnwlcStaticBlacklistProfileSTAMac | read-create | current | The MAC address of the station to blacklist. |
| 1.3.6.1.4.1.272.4.61.1.32.1.2 | ColumnwlcStaticBlacklistProfileVSSProfIndex | read-create | current | The SSID (wlcVSSProfileIndex) this blacklist entry is associated to. |
| 1.3.6.1.4.1.272.4.61.1.32.1.3 | ColumnwlcStaticBlacklistProfileRowStatus | read-create | current | The row-status of a blacklist entry. |
| 1.3.6.1.4.1.272.4.61.1.33 | TablewlcDynamicBlacklistProfileTable | not-accessible | current | The wlcDynamicBlacklistProfile contains information about stations that are blacklisted as a countermeasure to inappropriate behaviour. |
| 1.3.6.1.4.1.272.4.61.1.33.1 | RowwlcDynamicBlacklistProfileEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.33.1.1 | ColumnwlcDynamicBlacklistProfileSTAMac | read-only | current | The MAC address of the station that is blacklisted. |
| 1.3.6.1.4.1.272.4.61.1.33.1.2 | ColumnwlcDynamicBlacklistProfileVSSProfIndex | read-only | current | The SSID on a specific WTP (wlcVSSIndex) a station belongs to. |
| 1.3.6.1.4.1.272.4.61.1.33.1.3 | ColumnwlcDynamicBlacklistProfileFirstSeen | read-only | current | The 1st time a blacklisted station drew attention. |
| 1.3.6.1.4.1.272.4.61.1.33.1.4 | ColumnwlcDynamicBlacklistProfileLastSeen | read-only | current | The last time a blacklisted station drew attention. |
| 1.3.6.1.4.1.272.4.61.1.33.1.5 | ColumnwlcDynamicBlacklistProfileReason | read-only | current | The reason why a station is blacklisted. |
| 1.3.6.1.4.1.272.4.61.1.33.1.6 | ColumnwlcDynamicBlacklistProfileLastRSSI | read-only | current | RSSI of station it annoyed last time. |
| 1.3.6.1.4.1.272.4.61.1.33.1.7 | ColumnwlcDynamicBlacklistProfileWTPIndex | read-only | current | The WTP the station was blacklisted at. |
| 1.3.6.1.4.1.272.4.61.1.33.1.8 | ColumnwlcDynamicBlacklistProfileRowStatus | read-create | current | The row status of the blacklist entry. Although the conceptual row is not creatable by the user, one is able to set the row to notInService. |
| 1.3.6.1.4.1.272.4.61.1.34 | TablewlcVSSBadAuthAcctTable | not-accessible | current | The wlcAuthAcct contains some authentication accounting parameters for a wlcVSS. |
| 1.3.6.1.4.1.272.4.61.1.34.1 | RowwlcVSSBadAuthAcctEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.34.1.1 | ColumnwlcVSSBadAuthAcctWlcVSSProfIndex | read-only | current | Reference to wlcVSS entry this authentication accounting information corresponds to. |
| 1.3.6.1.4.1.272.4.61.1.34.1.2 | ColumnwlcVSSBadAuthAcctSTAMac | read-only | current | The MAC address of the station the failed authentication attempts are originating from. |
| 1.3.6.1.4.1.272.4.61.1.34.1.3 | ColumnwlcVSSBadAuthAcctTime1stFail | read-only | current | Timestamp of the first failed authentication attempt. This entry is deleted after 1 hour of inactivity. |
| 1.3.6.1.4.1.272.4.61.1.34.1.4 | ColumnwlcVSSBadAuthAcctTimeLastFail | read-only | current | Timestamp of the last failed authentication attempt. |
| 1.3.6.1.4.1.272.4.61.1.34.1.5 | ColumnwlcVSSBadAuthAcctNumFailAttempts | read-only | current | The number of failed authentication attempts from a given station on a given wlcVSS since the first failed authentication attempt within an hour. |
| 1.3.6.1.4.1.272.4.61.1.34.1.6 | ColumnwlcVSSBadAuthAcctLastRSSI | read-only | current | The last RSSI of the station with failing authentication. |
| 1.3.6.1.4.1.272.4.61.1.34.1.7 | ColumnwlcVSSBadAuthAcctWTPIndex | read-only | current | The last WTP a station with failing to authenticate was seen. |
| 1.3.6.1.4.1.272.4.61.1.35 | TablewlcAutoSelectorTable | not-accessible | current | The table defines a selector to lookup a WTP in the wlcAutoWTPTable. See wlcAutoWTPSelectorIndex. |
| 1.3.6.1.4.1.272.4.61.1.35.1 | RowwlcAutoSelectorEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.35.1.1 | ColumnwlcAutoSelectorIndex | read-write | current | Unique selector index. |
| 1.3.6.1.4.1.272.4.61.1.35.1.2 | ColumnwlcAutoSelectorMacAddress | read-write | current | Selector: ethernet MAC address of the WTP. The address 00:00:00:00:00:00 matches for any MAC address. |
| 1.3.6.1.4.1.272.4.61.1.35.1.3 | ColumnwlcAutoSelectorInetAddressType | read-write | current | Selector: IP address type. It may be one of: -unknown(0): means that any IP address matches -ipv4(1) : an IPv4 address -ipv6(2) : an IPv6 address All other val… |
| 1.3.6.1.4.1.272.4.61.1.35.1.4 | ColumnwlcAutoSelectorInetAddress | read-write | current | Selector: IP address. |
| 1.3.6.1.4.1.272.4.61.1.35.1.5 | ColumnwlcAutoSelectorInetMask | read-write | current | Selector: IP netmask. |
| 1.3.6.1.4.1.272.4.61.1.36 | TablewlcAutoWTPTable | not-accessible | current | The table defines auto configuration of each WTP. |
| 1.3.6.1.4.1.272.4.61.1.36.1 | RowwlcAutoWTPEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.36.1.1 | ColumnwlcAutoWTPIndex | read-write | current | Unique index. |
| 1.3.6.1.4.1.272.4.61.1.36.1.2 | ColumnwlcAutoWTPSelectorIndex | read-write | current | Configured Selector index. See wlcAutoSelectorIndex. |
| 1.3.6.1.4.1.272.4.61.1.36.1.3 | ColumnwlcAutoWTPLocation | read-write | current | Location of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.36.1.4 | ColumnwlcAutoWTPDescription | read-write | current | Description of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.36.1.5 | ColumnwlcAutoWTPsecIndex | read-write | current | This attribute shows the currently configured secIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.36.1.6 | ColumnwlcAutoWTPlocalServicesIndex | read-write | current | This attribute shows the currently configured localServicesIndex of the requested WTP. |
| 1.3.6.1.4.1.272.4.61.1.37 | TablewlcAutoVSSTable | not-accessible | current | This table combines auto configured WTP with the VSS profile. |
| 1.3.6.1.4.1.272.4.61.1.37.1 | RowwlcAutoVSSEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.37.1.1 | ColumnwlcAutoVSSIndex | read-write | current | Unique index. |
| 1.3.6.1.4.1.272.4.61.1.37.1.2 | ColumnwlcAutoVSSwlanIfIndex | read-write | current | WLAN interface of the requested WTP WLAN interface. See wlcAutoWlanIfIndex. |
| 1.3.6.1.4.1.272.4.61.1.37.1.3 | ColumnwlcAutoVSSProfIndex | read-write | current | This variable contains the unique VSS profile index. See wlcVSSProfIndex. |
| 1.3.6.1.4.1.272.4.61.1.38 | TablewlcAutoWlanIfTable | not-accessible | current | The wlcAutoWlanIfTable contains all auto configured WLAN interfaces of each WTP with their configured profiles. |
| 1.3.6.1.4.1.272.4.61.1.38.1 | RowwlcAutoWlanIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.272.4.61.1.38.1.1 | ColumnwlcAutoWlanIfIndex | read-write | current | Unique index. |
| 1.3.6.1.4.1.272.4.61.1.38.1.2 | ColumnwlcAutoWlanIfWTPIndex | read-write | current | Configured WTP index. See wlcAutoWTPIndex. |
| 1.3.6.1.4.1.272.4.61.1.38.1.3 | ColumnwlcAutoWlanIfRadioNo | read-write | current | Radio number to match. |
| 1.3.6.1.4.1.272.4.61.1.38.1.4 | ColumnwlcAutoWlanIfProfIndex | read-write | current | Configured WLAN interface profile index. See wlcWlanIfProfileIndex. |
| 1.3.6.1.4.1.272.4.61.1.38.1.5 | ColumnwlcAutoWlanIfClientIndex | read-write | current | Index pointer to the wlcClientProfileTable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| WlanRate | INTEGER (0..600) | current | This type is used to represent WLAN data rates in 500 Kbps units. |
| WlanRSSI | INTEGER (-110..0) | current | This type is used to represent receiver input levels in dBm. |