BIANCA-BRICK-X25-MIB
195 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | BitValue Date HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.6 | Nodex25 | |||
| 1.3.6.1.4.1.272.4.6.1 | Tablex25LinkTable | not-accessible | mandatory | This table contains an entry for each active link. There may be mutiple active links per interface. For point-to- multipoint interfaces, the field x25LkAddr sp… |
| 1.3.6.1.4.1.272.4.6.1.1 | Rowx25LinkEntry | not-accessible | mandatory | The x25LinkEntry is created automatically, when a link becomes active. The entry is also removed automatically, if a link becomes disconnected. It may be remov… |
| 1.3.6.1.4.1.272.4.6.1.1.1 | Columnx25LkIfIndex | read-only | mandatory | The index of the interface the link is running on. See ifTable. |
| 1.3.6.1.4.1.272.4.6.1.1.2 | Columnx25LkAddr | read-only | mandatory | On point-to-multipoint interfaces, this field contains the (MAC-)address of the partner, the link is leading to. It is empty for point-to-point interfaces, bec… |
| 1.3.6.1.4.1.272.4.6.1.1.3 | Columnx25LkMode | read-only | mandatory | This field indicates wheter the Layer 3 on top of the link is operated in DTE or DCE mode. The difference is in the order of VC-assignment, the handling of a c… |
| 1.3.6.1.4.1.272.4.6.1.1.4 | Columnx25LkModulo | read-only | mandatory | This field indicates whether the layer 3 on top of the link is in modulo 8 or in modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.5 | Columnx25LkLIC | read-only | mandatory | Lowest Incoming Channel as seen from the DTE. The value -1 means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.6 | Columnx25LkHIC | read-only | mandatory | Highest Incoming Channel as seen from the DTE. The value -1 means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.1.1.7 | Columnx25LkLTC | read-only | mandatory | Lowest Twoway Channel as seen from the DTE. The value -1 means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.8 | Columnx25LkHTC | read-only | mandatory | Highest Twoway Channel as seen from the DTE. The value -1 means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.1.1.9 | Columnx25LkLOC | read-only | mandatory | Lowest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.10 | Columnx25LkHOC | read-only | mandatory | Highest Outgoing Channel as seen from the DTE. The value -1 means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.1.1.11 | Columnx25LkDefPktSize | read-only | mandatory | The default layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.12 | Columnx25LkDefWinSize | read-only | mandatory | The default window size. This is always less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.1.1.13 | Columnx25LkMaxPktSize | read-only | mandatory | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited… |
| 1.3.6.1.4.1.272.4.6.1.1.14 | Columnx25LkMaxWinSize | read-only | mandatory | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.1.1.15 | Columnx25LkL2WinSize | read-only | mandatory | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.1.1.16 | Columnx25LkL2RetrTimer | read-only | mandatory | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted. |
| 1.3.6.1.4.1.272.4.6.1.1.17 | Columnx25LkL2RetrCounter | read-only | mandatory | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this object, the link will be reset or … |
| 1.3.6.1.4.1.272.4.6.1.1.18 | Columnx25LkL2SupervTimer | read-only | mandatory | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiate… |
| 1.3.6.1.4.1.272.4.6.1.1.19 | Columnx25LkL2IdleTimer | read-only | mandatory | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the time specified by this object, th… |
| 1.3.6.1.4.1.272.4.6.1.1.20 | Columnx25LkState | read-write | mandatory | This object contains the current state of the link. The link may be manually disconnected by setting this object to the value delete. |
| 1.3.6.1.4.1.272.4.6.1.1.21 | Columnx25LkNegotiation | read-only | mandatory | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the … |
| 1.3.6.1.4.1.272.4.6.1.1.22 | Columnx25LkDiscDelayTimer | read-only | mandatory | The disc delay timer in milliseconds for the layer 2 of this link (only outgoing links). This timer specifies the time interval between receiving of layer 2 di… |
| 1.3.6.1.4.1.272.4.6.1.1.23 | Columnx25LkCallDelayTimer | read-only | mandatory | The call delay timer in milliseconds for the layer 3 of this link (only outgoing link). This timer specifies the time interval between restart procedure comple… |
| 1.3.6.1.4.1.272.4.6.1.1.24 | Columnx25LkRestDelayTimer | read-only | mandatory | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. I… |
| 1.3.6.1.4.1.272.4.6.1.1.25 | Columnx25LkRewritingRule | read-only | mandatory | This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being ro… |
| 1.3.6.1.4.1.272.4.6.1.1.26 | Columnx25LkL1IdleTimer | read-only | mandatory | The idle timer in milliseconds for the layer 1 of this link. If layer 2 is disconnected and the time specified by this object expired, the layer 1 will be disc… |
| 1.3.6.1.4.1.272.4.6.1.1.32 | Columnx25LkActSabmDelayTimer | read-only | mandatory | The sabm delay timer in milliseconds for this link (only dialup outgoing link). This timer specifies the time interval between establishment of layer 1 and sen… |
| 1.3.6.1.4.1.272.4.6.1.1.33 | Columnx25LkPsvSabmDelayTimer | read-only | mandatory | The passive sabm delay timer in milliseconds for this link (only dialup incoming link). This timer specifies the time interval between establishment of layer 1… |
| 1.3.6.1.4.1.272.4.6.2 | Tablex25LinkPresetTable | not-accessible | mandatory | This table predefines the link-parameters to be used, when a link is created. If no entry is contained in this table for a particular link, it will be setup wi… |
| 1.3.6.1.4.1.272.4.6.2.1 | Rowx25LinkPresetEntry | not-accessible | mandatory | Entries in this table are created by defining a new value for the field x25LkPrIfIndex. Entries may be deleted by setting the field x25LkPrMode to the value de… |
| 1.3.6.1.4.1.272.4.6.2.1.1 | Columnx25LkPrIfIndex | read-write | mandatory | The interface index of the link to be predefined. This object identifies a row in the ifTable. |
| 1.3.6.1.4.1.272.4.6.2.1.2 | Columnx25LkPrAddr | read-write | mandatory | On point-to-point links, this field must be empty. On point-to-multipoint links, this field may be empty or set to a partners (MAC-) address. In the first case… |
| 1.3.6.1.4.1.272.4.6.2.1.3 | Columnx25LkPrMode | read-write | mandatory | This field indicates, whether the link is initially operated in DTE or DCE mode. If a misconfiguration is detected, (DTE<->DTE od DCE<->DCE) the DTE/DCE assign… |
| 1.3.6.1.4.1.272.4.6.2.1.4 | Columnx25LkPrModulo | read-write | mandatory | This object indicates, whether the link should be operated in modulo 8 or modulo 128 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.5 | Columnx25LkPrLIC | read-write | mandatory | Lowest Incoming Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.6 | Columnx25LkPrHIC | read-write | mandatory | Highest Incoming Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no incoming channels. |
| 1.3.6.1.4.1.272.4.6.2.1.7 | Columnx25LkPrLTC | read-write | mandatory | Lowest Twoway Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.8 | Columnx25LkPrHTC | read-write | mandatory | Highest Twoway Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no twoway channels. |
| 1.3.6.1.4.1.272.4.6.2.1.9 | Columnx25LkPrLOC | read-write | mandatory | Lowest Outgoing Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.10 | Columnx25LkPrHOC | read-write | mandatory | Highest Outgoing Channel as seen from the DTE. Depending on the value of x25LkPrVC0, the value of -1 or Zero means no outgoing channels. |
| 1.3.6.1.4.1.272.4.6.2.1.11 | Columnx25LkPrDefPktSize | read-write | mandatory | The Layer 3 packet size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.12 | Columnx25LkPrDefWinSize | read-write | mandatory | The default window size. This must be less than 8, if the layer 3 is operated in modulo 8 mode. |
| 1.3.6.1.4.1.272.4.6.2.1.13 | Columnx25LkPrMaxPktSize | read-write | mandatory | The maximum allowable packet size for this link during X.25 packet size negotiation. If this field is set to unrestricted, the packet size will only be limited… |
| 1.3.6.1.4.1.272.4.6.2.1.14 | Columnx25LkPrMaxWinSize | read-write | mandatory | The maximum allowable window size for this link during window size negotiation. |
| 1.3.6.1.4.1.272.4.6.2.1.15 | Columnx25LkPrL2WinSize | read-write | mandatory | The layer 2 window size for this link. |
| 1.3.6.1.4.1.272.4.6.2.1.16 | Columnx25LkPrL2RetrTimer | read-write | mandatory | The retransmission timeout in milliseconds for the layer 2 of this link. If a frame is not acknowledged within this timeout, it will be retransmitted. |
| 1.3.6.1.4.1.272.4.6.2.1.17 | Columnx25LkPrL2RetrCounter | read-write | mandatory | The retransmission counter for the layer 2 of this link. If a frame has been retransmitted more often than indicated by this object, the link will be reset or … |
| 1.3.6.1.4.1.272.4.6.2.1.18 | Columnx25LkPrL2SupervTimer | read-write | mandatory | The link-supervision timeout in milliseconds for the layer 2 of this link. This timer is started, when the link gets idle. An RR poll-sequence will be initiate… |
| 1.3.6.1.4.1.272.4.6.2.1.19 | Columnx25LkPrL2IdleTimer | read-write | mandatory | The idle timer in milliseconds for the layer 2 of this link. If no VCs are established and the the link has been idle for the time specified by this object, th… |
| 1.3.6.1.4.1.272.4.6.2.1.20 | Columnx25LkPrNegotiation | read-write | mandatory | This object determines whether packet-size and windows-size parameters are negotiated for outgoing calls. When set to never, outgoing calls are cleared if the … |
| 1.3.6.1.4.1.272.4.6.2.1.23 | Columnx25LkPrRestDelayTimer | read-write | mandatory | The Restart delay timer in milliseconds for this link. This timer specifies the time interval between establishment of layer 2 and sending of restart packet. I… |
| 1.3.6.1.4.1.272.4.6.2.1.24 | Columnx25LkPrVC0 | read-write | mandatory | This object indicates, whether VC#0 shall be allowed on the link. If this object is set to enable, VC#0 is allowed and the value -1 shall be used to indicate t… |
| 1.3.6.1.4.1.272.4.6.2.1.25 | Columnx25LkPrRewritingRule | read-write | mandatory | This Object specifies a rewriting rule in the X25 Rewrite table. The call packet will be processed according to this rewriting rule before the call is being ro… |
| 1.3.6.1.4.1.272.4.6.3 | Tablex25CallTable | not-accessible | mandatory | This table contains an entry for each active X25-call. Calls always lead from a source-link to a destination-link. An interface index of 1 denotates a pseudo i… |
| 1.3.6.1.4.1.272.4.6.3.1 | Rowx25CallEntry | not-accessible | mandatory | The entries are created automatically, as soon as a call gets active. They are removed automatically as soon as a call gets completely cleared. A call may also… |
| 1.3.6.1.4.1.272.4.6.3.1.1 | Columnx25CallSrcIfIndex | read-only | mandatory | The interface index of the link, the call comes from. This object contains the value 1, when the call is originated locally. |
| 1.3.6.1.4.1.272.4.6.3.1.2 | Columnx25CallSrcLinkAddr | read-only | mandatory | The (MAC-)address of the link, the call comes from (if any) |
| 1.3.6.1.4.1.272.4.6.3.1.3 | Columnx25CallSrcVCNumber | read-only | mandatory | The virtual curcuit number of the call on the link, the call comes from. |
| 1.3.6.1.4.1.272.4.6.3.1.4 | Columnx25CallDstIfIndex | read-only | mandatory | The interface index of the link, the call leads to. This object contains the value 1, when the link is terminated locally. |
| 1.3.6.1.4.1.272.4.6.3.1.5 | Columnx25CallDstLinkAddr | read-only | mandatory | The (MAC-)address of the link, the call leads to. |
| 1.3.6.1.4.1.272.4.6.3.1.6 | Columnx25CallDstVCNumber | read-only | mandatory | The virtual curcuit number of the call on the target link. |
| 1.3.6.1.4.1.272.4.6.3.1.7 | Columnx25CallSrcAddr | read-only | mandatory | The calling address of the call as received on the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.8 | Columnx25CallDstAddr | read-only | mandatory | The called address of the call as received on the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.9 | Columnx25CallProtocolId | read-only | mandatory | The protocol id (the first four byte of the call user data) of the call as received from the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.10 | Columnx25CallFacilities | read-only | mandatory | The facilities of the call as received from the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.11 | Columnx25CallUserData | read-only | mandatory | The user data (whithout the protocol id) of the call as received from the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.12 | Columnx25CallAge | read-only | mandatory | The age of the call since received from the source link. |
| 1.3.6.1.4.1.272.4.6.3.1.13 | Columnx25CallState | read-write | mandatory | The current state of the call. A call may be cleared manually by setting this object to the value delete. |
| 1.3.6.1.4.1.272.4.6.3.1.14 | Columnx25CallInPktSize | read-only | mandatory | The packet size of packets being received by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.3.1.15 | Columnx25CallOutPktSize | read-only | mandatory | The packet size of packets being sent by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.3.1.16 | Columnx25CallInWinSize | read-only | mandatory | The window size of packets being received by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.3.1.17 | Columnx25CallOutWinSize | read-only | mandatory | The window size of packets being sent by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.3.1.18 | Columnx25CallPktsSent | read-only | mandatory | The number of all layer 3 packets (including RR/RNR/REJ) sent by the caller. |
| 1.3.6.1.4.1.272.4.6.3.1.19 | Columnx25CallBytesSent | read-only | mandatory | The number of data bytes sent in DATA and INTERRUPT packets by the caller. |
| 1.3.6.1.4.1.272.4.6.3.1.20 | Columnx25CallPktsRecvd | read-only | mandatory | The number of all layer 3 packets (including RR/RNR/REJ) received by the caller. |
| 1.3.6.1.4.1.272.4.6.3.1.21 | Columnx25CallBytesRecvd | read-only | mandatory | The number of data bytes received in DATA and INTERRUPT packets by the caller. |
| 1.3.6.1.4.1.272.4.6.4 | Tablex25CallHistoryTable | not-accessible | mandatory | This table provides call information for the last 10 calls after they have been cleared. Active call are not contained in the x25CallHistoryTable. |
| 1.3.6.1.4.1.272.4.6.4.1 | Rowx25CallHistoryEntry | not-accessible | mandatory | Entries are created automatically, when a call is cleared completely. The first entry is deleted automatcally, if a new entry would be the 11th entry in the ta… |
| 1.3.6.1.4.1.272.4.6.4.1.1 | Columnx25CallHistoryTime | read-only | mandatory | Date and time, when the call was received. |
| 1.3.6.1.4.1.272.4.6.4.1.2 | Columnx25CallHistoryDuration | read-only | mandatory | Duration of the call in seconds. |
| 1.3.6.1.4.1.272.4.6.4.1.3 | Columnx25CallHistorySrcIfIndex | read-only | mandatory | Interface index of the link, the call came from. |
| 1.3.6.1.4.1.272.4.6.4.1.4 | Columnx25CallHistorySrcLinkAddr | read-only | mandatory | (MAC-)address of the link, the call came from. |
| 1.3.6.1.4.1.272.4.6.4.1.5 | Columnx25CallHistorySrcVCNumber | read-only | mandatory | Virtual Curcuit Number on the link, the call came from. |
| 1.3.6.1.4.1.272.4.6.4.1.6 | Columnx25CallHistoryDstIfIndex | read-only | mandatory | Interface index of the link, the call leads to. |
| 1.3.6.1.4.1.272.4.6.4.1.7 | Columnx25CallHistoryDstLinkAddr | read-only | mandatory | (MAC-)address of the link, the call leads to. |
| 1.3.6.1.4.1.272.4.6.4.1.8 | Columnx25CallHistoryDstVCNumber | read-only | mandatory | Virtual Curcuit Number on the link, the call leads to. |
| 1.3.6.1.4.1.272.4.6.4.1.9 | Columnx25CallHistorySrcAddr | read-only | mandatory | The calling party number as received from the source link. |
| 1.3.6.1.4.1.272.4.6.4.1.10 | Columnx25CallHistoryDstAddr | read-only | mandatory | The called party number as received from the source link. |
| 1.3.6.1.4.1.272.4.6.4.1.11 | Columnx25CallHistoryProtocolId | read-only | mandatory | The Protocol ID of the call (first four bytes of the call user data field) as received from the source link. |
| 1.3.6.1.4.1.272.4.6.4.1.12 | Columnx25CallHistoryFacilities | read-only | mandatory | The facility field of the call as received from the source link. |
| 1.3.6.1.4.1.272.4.6.4.1.13 | Columnx25CallHistoryUserData | read-only | mandatory | The call user data behind the protocol ID as received from the source link |
| 1.3.6.1.4.1.272.4.6.4.1.14 | Columnx25CallHistoryInPktSize | read-only | mandatory | The packet size of packets being received by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.4.1.15 | Columnx25CallHistoryOutPktSize | read-only | mandatory | The packet size of packets being sent by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.4.1.16 | Columnx25CallHistoryInWinSize | read-only | mandatory | The window size of packets being received by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.4.1.17 | Columnx25CallHistoryOutWinSize | read-only | mandatory | The window size of packets being sent by the caller, as negotiated by the negotiation procedure. |
| 1.3.6.1.4.1.272.4.6.4.1.18 | Columnx25CallHistoryPktsSent | read-only | mandatory | The number of all layer 3 packets (including RR/RNR/REJ) sent by the caller. |
| 1.3.6.1.4.1.272.4.6.4.1.19 | Columnx25CallHistoryBytesSent | read-only | mandatory | The number of data bytes sent in DATA and INTERRUPT packets by the caller. |
| 1.3.6.1.4.1.272.4.6.4.1.20 | Columnx25CallHistoryPktsRecvd | read-only | mandatory | The number of all layer 3 packets (including RR/RNR/REJ) received by the caller. |
| 1.3.6.1.4.1.272.4.6.4.1.21 | Columnx25CallHistoryBytesRecvd | read-only | mandatory | The number of data bytes received in DATA and INTERRUPT packets by the caller. |
| 1.3.6.1.4.1.272.4.6.4.1.22 | Columnx25CallHistoryClearCause | read-only | mandatory | The clearing cause of the call as received in the first clear packet. A value of -1 means, no cause was received. |
| 1.3.6.1.4.1.272.4.6.4.1.23 | Columnx25CallHistoryClearDiag | read-only | mandatory | The clearing diagnostics of the call as received in the first clear packet. A value of -1 means, no diagnostics was received. |
| 1.3.6.1.4.1.272.4.6.5 | Tablex25RouteTable | not-accessible | mandatory | The X.25 Routing Table specifies the target link for different call parameters. For each incoming call the route table will be searched for a matching entry. I… |
| 1.3.6.1.4.1.272.4.6.5.1 | Rowx25RouteEntry | not-accessible | mandatory | Entries can only be created and deleted manually. |
| 1.3.6.1.4.1.272.4.6.5.1.1 | Columnx25RtSrcIfIndex | read-write | mandatory | The originating interface index of the call. If this object is set to zero, the originating interface index will not be checked for the matching process. If th… |
| 1.3.6.1.4.1.272.4.6.5.1.2 | Columnx25RtSrcLinkAddr | read-write | mandatory | The originating (MAC-)address of the call. If this object is a zero length string, the originating address will not be checked for the matching process. |
| 1.3.6.1.4.1.272.4.6.5.1.3 | Columnx25RtDstIfIndex | read-write | mandatory | The interface index the call has to be sent to. If this value is set to one, the call will be used locally. If the value is set to zero, the call will be refus… |
| 1.3.6.1.4.1.272.4.6.5.1.4 | Columnx25RtDstLinkAddr | read-write | mandatory | The (MAC-)address of the station, the call has to be sent to. This object is ignored for point-to-point interfaces. |
| 1.3.6.1.4.1.272.4.6.5.1.5 | Columnx25RtDstLinkAddrMode | read-write | mandatory | This object specifies the way, the destination link address is generated. Default will use the default method for the target interface. When direct is selected… |
| 1.3.6.1.4.1.272.4.6.5.1.6 | Columnx25RtSrcAddr | read-write | mandatory | The source X.121 address in the X25 call packet. If empty, the source address will not be matched. Extended Adresses are indicated by a leading '@'. The wildca… |
| 1.3.6.1.4.1.272.4.6.5.1.7 | Columnx25RtSrcNSAP | read-write | mandatory | The source NSAP in the X25 call packet. If empty, the source NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a … |
| 1.3.6.1.4.1.272.4.6.5.1.8 | Columnx25RtDstAddr | read-write | mandatory | The target X.121 address in the X25 call packet. If empty, the target address will not be matched. Extended Adresses are indicated by a leading '@'. The wildca… |
| 1.3.6.1.4.1.272.4.6.5.1.9 | Columnx25RtDstNSAP | read-write | mandatory | The target NSAP in the X25 call packet. If empty, the target NSAP will not be matched. The NSAP is preceeded by an 'X' if it is an OSI compatible NSAP or by a … |
| 1.3.6.1.4.1.272.4.6.5.1.10 | Columnx25RtProtocolId | read-write | mandatory | The protocol id of the X25 call packet. The protocol id will not be used for the matching process, when this object is set to -1 |
| 1.3.6.1.4.1.272.4.6.5.1.11 | Columnx25RtCallUserData | read-write | mandatory | The call user data field of the X25 call packet behind the protocol id. If empty, the call user data field will not be used for matching. |
| 1.3.6.1.4.1.272.4.6.5.1.12 | Columnx25RtRPOA | read-write | mandatory | This object will be compared to the first value in the list of RPOAs in the X25 call packet, if not set to -1. |
| 1.3.6.1.4.1.272.4.6.5.1.13 | Columnx25RtNUI | read-write | mandatory | This object will be compared to the NUI facility supplied with the call. If this object is an empty string, the NUI facility will not be used for the matching … |
| 1.3.6.1.4.1.272.4.6.5.1.14 | Columnx25RtRewritingRule | read-write | mandatory | This Object specifies a rewriting rule in the X25 Rewriting Rule table. The call packed will be processed according to this rewriting rule before the call is b… |
| 1.3.6.1.4.1.272.4.6.5.1.15 | Columnx25RtMetric | read-write | mandatory | This object specifies a metric similar to the metric of an IP routing entry. If a call matches multiple entries in the X25 routing table, the routing entry wit… |
| 1.3.6.1.4.1.272.4.6.5.1.16 | Columnx25RtCug | read-write | mandatory | This object will be compared to the CUG facility supplied with the call, if not set to -1. |
| 1.3.6.1.4.1.272.4.6.5.1.17 | Columnx25RtCugOutgoing | read-write | mandatory | This object will be compared to the Outgoing CUG facility supplied with the call, if not set to -1. |
| 1.3.6.1.4.1.272.4.6.5.1.18 | Columnx25RtCugBilateral | read-write | mandatory | This object will be compared to the Bilateral CUG facility supplied with the call, if not set to -1. |
| 1.3.6.1.4.1.272.4.6.5.1.19 | Columnx25RtDstLinkAddrRule | read-write | mandatory | If x25RtDstLinkAddrMode is set to rule this object describes, how to develop the destination link address (may be ISDN call number, MAC address or IP address) … |
| 1.3.6.1.4.1.272.4.6.6 | Tablex25RewriteTable | not-accessible | mandatory | This Table contains entries, that describe different rules of rewriting the call parameters before delivering a call. Which entry in this table is used, will b… |
| 1.3.6.1.4.1.272.4.6.6.1 | Rowx25RewriteEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.6.6.1.1 | Columnx25RwRewritingRule | read-write | mandatory | The unique number of the rewriting rule. |
| 1.3.6.1.4.1.272.4.6.6.1.2 | Columnx25RwReverseCharging | read-write | mandatory | This object describes what to do with the reverse charging facility. |
| 1.3.6.1.4.1.272.4.6.6.1.3 | Columnx25RwRPOA | read-write | mandatory | This object describes what to do with the rpoa facility. |
| 1.3.6.1.4.1.272.4.6.6.1.4 | Columnx25RwNUI | read-write | mandatory | This object contains the new value of the NUI facility. If this object is an empty string, the NUI facility will not be changed. |
| 1.3.6.1.4.1.272.4.6.6.1.5 | Columnx25RwSrcAddr | read-write | mandatory | Specifies how to rewrite the source address. Digits will be set directly to the new address. A '.' will move a digit from the old address to the new address. A… |
| 1.3.6.1.4.1.272.4.6.6.1.6 | Columnx25RwSrcNSAP | read-write | mandatory | Specifies how to rewrite the source NSAP. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' will mo… |
| 1.3.6.1.4.1.272.4.6.6.1.7 | Columnx25RwDstAddr | read-write | mandatory | Specifies how to rewrite the destination address. Digits will be set directly to the new address. A '.' will move a digit from the old address to the new addre… |
| 1.3.6.1.4.1.272.4.6.6.1.8 | Columnx25RwDstNSAP | read-write | mandatory | Specifies how to rewrite the destination NSAP. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to the new NSAP. A '*' wi… |
| 1.3.6.1.4.1.272.4.6.6.1.9 | Columnx25RwProtocolId | read-write | mandatory | This object specifies the new value of the protocol id field. The protocol id field will not be changed, if this object is set to -1 |
| 1.3.6.1.4.1.272.4.6.6.1.10 | Columnx25RwCallUserData | read-write | mandatory | The new value of the call user data field. The call user data field will not be changed, if this object is an empty string. A leading '%' will be ignored. This… |
| 1.3.6.1.4.1.272.4.6.6.1.11 | Columnx25RwRespSrcAddr | read-write | mandatory | Specifies how to rewrite the source address of the call accepted packet. Digits will be set directly to the new address. A '.' will move a digit from the old a… |
| 1.3.6.1.4.1.272.4.6.6.1.12 | Columnx25RwRespSrcNSAP | read-write | mandatory | Specifies how to rewrite the source NSAP in the call accepted packet. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NSAP to… |
| 1.3.6.1.4.1.272.4.6.6.1.13 | Columnx25RwRespDstAddr | read-write | mandatory | Specifies how to rewrite the destination address of the call accepted packet. Digits will be set directly to the new address. A '.' will move a digit from the … |
| 1.3.6.1.4.1.272.4.6.6.1.14 | Columnx25RwRespDstNSAP | read-write | mandatory | Specifies how to rewrite the destination NSAP in the call accepted packet. Digits will be set directly to the new NSAP. A '.' will move a digit from the old NS… |
| 1.3.6.1.4.1.272.4.6.6.1.15 | Columnx25RwRespProtocolId | read-write | mandatory | This object contains the new value of the ProtocolID field of the call accepted packet. The ProtocolID will not be changed, if this object is set to -1. |
| 1.3.6.1.4.1.272.4.6.6.1.16 | Columnx25RwRespCallUserData | read-write | mandatory | The new value of the call user data field of the call accepted packet. The call user data field will not be changed, if this object is an empty string. A leadi… |
| 1.3.6.1.4.1.272.4.6.6.1.17 | Columnx25RwCug | read-write | mandatory | This object contains the new value of the CUG facility. If this object is set to -1, the CUG facility will not be changed. The CUG facility will be removed, if… |
| 1.3.6.1.4.1.272.4.6.6.1.18 | Columnx25RwCugOutgoing | read-write | mandatory | This object contains the new value of the Outgoing CUG facility. If this object is set to -1, the Outgoing CUG facility will not be changed. The Outgoing CUG f… |
| 1.3.6.1.4.1.272.4.6.6.1.19 | Columnx25RwCugBilateral | read-write | mandatory | This object contains the new value of the Bilateral CUG facility. If this object is set to -1, the Bilateral CUG facility will not be changed. The Bilateral CU… |
| 1.3.6.1.4.1.272.4.6.7 | Tablex25MprTable | not-accessible | mandatory | This table contains an entry for each partner reachable via X.25 for Multiprotocol over X.25 according to RFC 1356. Entries in this table are created manually … |
| 1.3.6.1.4.1.272.4.6.7.1 | Rowx25MprEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.6.7.1.1 | Columnx25MprIfIndex | read-write | mandatory | This object contains an interface index and assigns the row to an entry in ifTable. When creating new entries in the table, the value of this object shall be s… |
| 1.3.6.1.4.1.272.4.6.7.1.2 | Columnx25MprMtu | read-write | mandatory | The Maximum transfer unit to be used with the interface, the row is describing. |
| 1.3.6.1.4.1.272.4.6.7.1.3 | Columnx25MprEncapsulation | read-write | mandatory | This object specifies the encapsulation method to be used. If this object is set to ip_rfc877, the RFC877 compatible encapsulation is selected. The relating in… |
| 1.3.6.1.4.1.272.4.6.7.1.4 | Columnx25MprNumVC | read-write | mandatory | This object specifies the number of VCs used with the corresponding interface. The BRICK will always try to have that many VCs available for the relating inter… |
| 1.3.6.1.4.1.272.4.6.7.1.5 | Columnx25MprMaxVC | read-write | mandatory | This object specifies the maximum number of VCs used with the corresponding interface. It shall be greater or equal to x25MprNumVC. |
| 1.3.6.1.4.1.272.4.6.7.1.6 | Columnx25MprWinSize | read-write | mandatory | This object describes the window size to be used for outgoing X.25 virtual calls. |
| 1.3.6.1.4.1.272.4.6.7.1.7 | Columnx25MprPktSize | read-write | mandatory | This object describes the packet size, to be used for outgoing X.25 calls. Please note that this parameter is independant of the x25MprMtu parameter. |
| 1.3.6.1.4.1.272.4.6.7.1.8 | Columnx25MprShortHold | read-write | mandatory | This object specifies the time of inactivity in seconds, after which the VCs are disconnected automatically. |
| 1.3.6.1.4.1.272.4.6.7.1.9 | Columnx25MprMaxRetries | read-write | mandatory | This object specifies the maximum number of tries for X.25 call establishement. If the BRICK has tried to establish the call for this many times, the interface… |
| 1.3.6.1.4.1.272.4.6.7.1.10 | Columnx25MprBlockTime | read-write | mandatory | This object describes the amount of time, the corresponding interface remains in the blocked state after too many tries to establish the X.25 call. |
| 1.3.6.1.4.1.272.4.6.7.1.11 | Columnx25MprAddr | read-write | mandatory | The X.25 address to be used with this interface. A leading @ indicates extended adressing. |
| 1.3.6.1.4.1.272.4.6.7.1.12 | Columnx25MprMode | read-write | mandatory | This object describes the operating mode of the interface. normal multiuser incoming X.25 call. |
| 1.3.6.1.4.1.272.4.6.7.1.13 | Columnx25MprAutoRoute | read-write | mandatory | This object describes, how automatic routes are created. It is especially usefull combined with the multiuser Mode of the interface. off check the first packet… |
| 1.3.6.1.4.1.272.4.6.7.1.14 | Columnx25MprIpSubnet | read-write | mandatory | This object specifies, together with x25MprSubnetMask the possible range for automatically created routes. The object is valid, when x25MprMode is set to autor… |
| 1.3.6.1.4.1.272.4.6.7.1.15 | Columnx25MprIpSubnetMask | read-write | mandatory | This object specifies, together with x25MprSubnet the possible range for automatically created routes. The object is valid, when x25MprMode is set to autoroute… |
| 1.3.6.1.4.1.272.4.6.10 | Scalarx25LocalPadCall | read-write | mandatory | This object specifies wether a PAD Call (PID=1) routed to the local X.25 entity (ifIndex=1) should be accepted to allow for a remote login via X.25. This may b… |
| 1.3.6.1.4.1.272.4.6.11 | Scalarx25LocalAddr | read-write | mandatory | The X.25 address to be used as originating address for outgoing X.25 call from this BRICK. A leading @ indicates extended adressing. |
| 1.3.6.1.4.1.272.4.6.12 | Scalarx25Rerouting | read-write | mandatory | This object specifies whether a rerouting request should be accepted to establish connection to another server. This is only relevant for x29 rerouting. |
| 1.3.6.1.4.1.272.4.6.13 | Scalarx25HistoryMaxEntries | read-write | mandatory | Maximum number of x25CallHistory entries in memory. |
| 1.3.6.1.4.1.272.4.6.14 | Scalarx25AccountingTemplate | read-write | mandatory | Specifies the format of accounting messages sent by the syslog protocol. The format can consist of any order of the following variables. Tag Meaning %S Date an… |
| 1.3.6.1.4.1.272.4.6.15 | Tablex25OverIsdnIfTable | not-accessible | mandatory | This table contains an entry for each Interface accessible to the X.25 Switch for X.25 over ISDN B-channel data transfer. This mechanism superseeds the old one… |
| 1.3.6.1.4.1.272.4.6.15.1 | Rowx25OverIsdnIfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.6.15.1.1 | ColumnxoiIfIndex | read-write | mandatory | This object contains the interface index for the interface. When this object is set to an interface number, that does not yet correspond to an existing interfa… |
| 1.3.6.1.4.1.272.4.6.15.1.2 | ColumnxoiIfType | read-write | mandatory | This object specifies the type of the interface and can also be used to delete the complete row and the corresponding interface. The following types are availa… |
| 1.3.6.1.4.1.272.4.6.15.1.3 | ColumnxoiIfDirection | read-write | mandatory | This object specifies the allowd direction of ISDN calls. The value none can be used to disable an interface. |
| 1.3.6.1.4.1.272.4.6.15.1.4 | ColumnxoiIfLocalNumber | read-write | mandatory | This object specifies the local ISDN number. For outgoing calls, it is used as calling party number, unless it is overwritten by the X.25 routing mechanisms. F… |
| 1.3.6.1.4.1.272.4.6.15.1.5 | ColumnxoiIfRemoteNumber | read-write | mandatory | This object specifies the remote ISDN number. For outgoing ISDN calls, it is used as called party number, unless it is overwritten by X.25 routing mechanisms. … |
| 1.3.6.1.4.1.272.4.6.15.1.6 | ColumnxoiIfStkMask | read-write | mandatory | This object specifies the ISDN stacks to be used for incoming and outgoing ISDN calls. If none of the specified stacks is ready for use, the ifOperStatus in th… |
| 1.3.6.1.4.1.272.4.6.15.1.7 | ColumnxoiIfSignalling | read-write | mandatory | This object sets the signalling for outgoing calls and is used assign incoming calls to interfaces. If set to 0, an ISDN signalling is generated automatically … |
| 1.3.6.1.4.1.272.4.6.15.1.8 | ColumnxoiIfL1Protocol | read-write | mandatory | This object specifies the layer 1 protocol for the interface. The specified mode is used for incoming and outgoing calls. If auto is selected, the layer 1 prot… |
| 1.3.6.1.4.1.272.4.6.15.1.9 | ColumnxoiIfL2Protocol | read-write | mandatory | This object specifies the layer 2 protocol of the interface. The setting applies to incoming and outgoing calls. When auto is selected, the layer 2 protocol is… |
| 1.3.6.1.4.1.272.4.6.15.1.10 | ColumnxoiIfPadProfile | read-write | mandatory | In case of a PAD instance being used (see Layer2Mode), this object specifies the PAD profile to be used. |
| 1.3.6.1.4.1.272.4.6.15.1.11 | ColumnxoiIfModemProfile | read-write | mandatory | In case of a modem being used for layer 1, this object specifies the modem profile. |
| 1.3.6.1.4.1.272.4.6.15.1.12 | ColumnxoiIfMaxCalls | read-write | mandatory | This object specifies the maximum number of calls for the interface. |
| 1.3.6.1.4.1.272.4.6.15.1.13 | ColumnxoiIfL2Mode | read-write | mandatory | This object specifies whether the layer2 should act in DTE or DCE configuration. If set to auto. The ISDN caller is always DTE, and the callee is DCE. |
| 1.3.6.1.4.1.272.4.6.15.1.14 | ColumnxoiIfStatCommand | read-write | mandatory | This object may be used, to clear the statistics counters for the interface. When set to clear, all statistics counters in this table and the ifTable are set t… |
| 1.3.6.1.4.1.272.4.6.15.1.15 | ColumnxoiIfMaxRetries | read-write | mandatory | This object specifies the number of times, an unsuccessful call has to be retried. When even after this many times, it was not possible, to establish an ISDN c… |
| 1.3.6.1.4.1.272.4.6.15.1.16 | ColumnxoiIfRetryTime | read-write | mandatory | This object specifies the amount of time in seconds, to wait between the retries of an ISDN call. If the value is negative, a random time will be chosen betwee… |
| 1.3.6.1.4.1.272.4.6.15.1.17 | ColumnxoiIfBlockTime | read-write | mandatory | This object specifies the amount of time in seconds, the interface will stay in the BLOCKED state after unsuccessful ISDN call establishment. |
| 1.3.6.1.4.1.272.4.6.15.1.20 | ColumnxoiIfCurrentCalls | read-only | mandatory | This object indicates the number of currently established calls for the interface. |
| 1.3.6.1.4.1.272.4.6.15.1.21 | ColumnxoiIfIncomingCalls | read-only | mandatory | This object is a statistics counter. It counts the number of incoming calls for the interface. |
| 1.3.6.1.4.1.272.4.6.15.1.22 | ColumnxoiIfOutgoingCalls | read-only | mandatory | This object is a statistics counter. It counts the number of outgoing calls for the interface. |
| 1.3.6.1.4.1.272.4.6.15.1.23 | ColumnxoiIfMaxConcCalls | read-only | mandatory | This object is a statistics counter. It indicates the maximum number of calls being active concurrently. |
| 1.3.6.1.4.1.272.4.6.15.1.24 | ColumnxoiIfCumulTime | read-only | mandatory | This object is a statistics counter. It cumulates the connection time of all calls assigned to the interface. |
| 1.3.6.1.4.1.272.4.6.15.1.25 | ColumnxoiIfBrkSeqVar | read-write | mandatory | This object indicates the additional number of startbits to detect a break sequence send from V.110 terminal over an S2M interface. The default number of start… |