BIANCA-BRICK-X25PAD-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | Date HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.6 | Nodex25 | |||
| 1.3.6.1.4.1.272.4.6.8 | Tablex25PadProfileTable | not-accessible | mandatory | This Table contains entries for the pad profiles. For PPP connections, pad profiles are assigned to incoming connections via the isdnDispatchTable. For outgoin… |
| 1.3.6.1.4.1.272.4.6.8.1 | Rowx25PadProfileEntry | not-accessible | mandatory | Entries can only be created and deleted manually. |
| 1.3.6.1.4.1.272.4.6.8.1.1 | Columnx25PadProNumber | read-write | mandatory | The unique number of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.2 | Columnx25PadProState | read-write | mandatory | The State of the profile. |
| 1.3.6.1.4.1.272.4.6.8.1.3 | Columnx25PadProAutoCallDstAddr | read-write | mandatory | When this object is set to a non-empty string, a call will automatically be established to this PAD address. |
| 1.3.6.1.4.1.272.4.6.8.1.4 | Columnx25PadProEscape | read-write | mandatory | The value of the parameter one. This parameter defines a character on its receipt the PAD alternates the state from data-transfer in connection-in-progress. Th… |
| 1.3.6.1.4.1.272.4.6.8.1.5 | Columnx25PadProEcho | read-write | mandatory | The value of the parameter two. This parameter determines whether the echo mode is off or on. The selection of the characters to be echoed is dependent on the … |
| 1.3.6.1.4.1.272.4.6.8.1.6 | Columnx25PadProForwardChar | read-write | mandatory | The value of the parameter three. This parameter defines a character. On its receipt the PAD forwards the previously received data from start-stop DTE as packe… |
| 1.3.6.1.4.1.272.4.6.8.1.7 | Columnx25PadProIdleTimer | read-write | mandatory | The value of parameter four. This parameter allows the selection of the duration of an interval between successive characters received from the start-stop DTE … |
| 1.3.6.1.4.1.272.4.6.8.1.8 | Columnx25PadProDevControl | read-write | mandatory | The value of the parameter five. This parameter allows for flow control between the PAD and the start-stop DTE. The PAD indicates whether it is ready or not to… |
| 1.3.6.1.4.1.272.4.6.8.1.9 | Columnx25PadProSigControl | read-write | mandatory | The value of the parameter six. This parameter provides the start-stop DTE with the ability to decide whether or not and in what format PAD service signals are… |
| 1.3.6.1.4.1.272.4.6.8.1.10 | Columnx25PadProBrkControl | read-write | mandatory | The value of the parameter seven. This parameter allows the selection of the operation of the PAD after the receipt of a BREAK-signal from the start-stop DTE i… |
| 1.3.6.1.4.1.272.4.6.8.1.11 | Columnx25PadProDiscard | read-write | mandatory | The value of the parameter eight. This parameter provides for a PAD to discard the content of user sequences in packets upon request rather than disassembling … |
| 1.3.6.1.4.1.272.4.6.8.1.12 | Columnx25PadProCRPadding | read-write | mandatory | The value of the parameter nine. This parameter provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to th… |
| 1.3.6.1.4.1.272.4.6.8.1.13 | Columnx25PadProLineFold | read-write | mandatory | The value of the parameter ten. This parameter provides for the automatic insertion by the PAD of appropriate format effectors in the character stream transmit… |
| 1.3.6.1.4.1.272.4.6.8.1.14 | Columnx25PadProFlowControl | read-write | mandatory | The value of the parameter twelve. It allows for flow control between the start-stop DTE and the PAD. The start-stop DTE indicates whether it is ready or not t… |
| 1.3.6.1.4.1.272.4.6.8.1.15 | Columnx25PadProLFInsert | read-write | mandatory | The value of the parameter thirteen. It provides for the automatic insertion by the PAD of a linefeed character in the character stream to or from the start-st… |
| 1.3.6.1.4.1.272.4.6.8.1.16 | Columnx25PadProLFPadding | read-write | mandatory | The value of the parameter fourteen. It provides for the automatic insertion by the PAD of padding characters in the character stream transmitted to the start-… |
| 1.3.6.1.4.1.272.4.6.8.1.17 | Columnx25PadProEdit | read-write | mandatory | The value of the parameter fifteen. It determines, whether editing of user data in data-transfer state is possible or not. The value 1 suspends data forwarding… |
| 1.3.6.1.4.1.272.4.6.8.1.18 | Columnx25PadProCharDel | read-write | mandatory | The value of the parameter sixteen. This parameter provides for character delete editing capabilities in the data-transfer state for the start-stop DTE. The ch… |
| 1.3.6.1.4.1.272.4.6.8.1.19 | Columnx25PadProLineDel | read-write | mandatory | The value of the parameter seventeen. This parameter provides for line delete editing capabilities in the data-transfer state for the start-stop DTE. The chara… |
| 1.3.6.1.4.1.272.4.6.8.1.20 | Columnx25PadProLineDisp | read-write | mandatory | The value of the parameter eighteen. This parameter provides for line display editing capabilities in the data-transfer state for the start-stop DTE. The chara… |
| 1.3.6.1.4.1.272.4.6.8.1.21 | Columnx25PadProSigEdit | read-write | mandatory | The value of the parameter nineteen. It provides the start- stop DTE with the ability to decide whether or not editing PAD service signals are transmitted and … |
| 1.3.6.1.4.1.272.4.6.8.1.22 | Columnx25PadProEchoMask | read-write | mandatory | The value of the parameter twenty. When ECHO is enabled, it allows selected defined sets of characters received from the start-stop DTE not to be transmitted b… |
| 1.3.6.1.4.1.272.4.6.8.1.23 | Columnx25PadProParity | read-write | mandatory | The value of the parameter twenty one. It allows the PAD to check parity in the data stream from the start-stop DTE and/or generate parity in the data stream t… |
| 1.3.6.1.4.1.272.4.6.8.1.24 | Columnx25PadProPageWait | read-write | mandatory | The value of the parameter twenty two. It allows the PAD to suspend transmission of additional characters to the start- stop DTE after specified number of line… |
| 1.3.6.1.4.1.272.4.6.8.1.25 | Columnx25PadProXCharDel | read-write | mandatory | The value of parameter one hundered eighteen. This parameter is a repeating of parameter sixteen. |
| 1.3.6.1.4.1.272.4.6.8.1.26 | Columnx25PadProXLineDel | read-write | mandatory | The value of parameter one hundered nineteen. This parameter is a repeating of parameter seventeen. |
| 1.3.6.1.4.1.272.4.6.8.1.27 | Columnx25PadProXLineDisp | read-write | mandatory | The value of the parameter one hundered twenty. This parameter is a repeating of parameter eighteen. |
| 1.3.6.1.4.1.272.4.6.8.1.28 | Columnx25PadProXForwardChar1 | read-write | mandatory | The value of the parameter one hundered twenty one. This parameter allows predefinition of one data forwarding character in addition to parameter three. |
| 1.3.6.1.4.1.272.4.6.8.1.29 | Columnx25PadProXForwardChar2 | read-write | mandatory | The value of the parameter one hundered twenty two. This parameter allows predefinition of one data forwarding character in addition to parameter three. |
| 1.3.6.1.4.1.272.4.6.8.1.30 | Columnx25PadProXParity | read-write | mandatory | The value of the parameter one hundered twenty three. This corresponds to the parameter twenty one, but the meaning of values 1 and 3 are interchanged. |
| 1.3.6.1.4.1.272.4.6.8.1.31 | Columnx25PadProXDelay | read-write | mandatory | The value of the parameter one hundered twenty five. This parameter determines how long data forwarding ist delayed, wenn it synces with a data entry. |
| 1.3.6.1.4.1.272.4.6.8.1.32 | Columnx25PadProXLFInsert | read-write | mandatory | The value of the parameter one hundered twenty six. This is a repeating of parameter thirteen. |
| 1.3.6.1.4.1.272.4.6.8.1.33 | Columnx25PadProIdent | read-write | mandatory | PAD Identification String, that is sent to start-stop DTE, when PAD is started. |
| 1.3.6.1.4.1.272.4.6.8.1.34 | Columnx25PadProTermAfterCall | read-write | mandatory | Terminate the PAD after X25 Call cleared |
| 1.3.6.1.4.1.272.4.6.8.1.35 | Columnx25PadProIgnoreX29 | read-write | mandatory | Ignore all X.29 messages |