BINTEC-AUX-MIB
35 objects
MIB for Aux/Modem support
Imported Objects
| BINTEC-MIB MISSING | BitValue Date HexValue tty |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.41.3 | IdentityauxMIB | MIB for Aux/Modem support | ||
| 1.3.6.1.4.1.272.4.41.3.1 | Nodeaux | |||
| 1.3.6.1.4.1.272.4.41.3.1.10 | TableauxConfigTable | not-accessible | current | The auxConfigTable configures each corresponding aux device. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1 | RowauxConfigEntry | not-accessible | current | A single auxConfigTable entry. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.1 | ColumnauxConfigIfIndex | read-only | current | The index of the corresponding tty interface. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.2 | ColumnauxConfigSpeed | read-write | current | The speed of the aux device. The default value is 9600. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.3 | ColumnauxConfigPIN | read-write | current | The PIN code of the SIM card. This is used to authorize the access to the SIM card. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.4 | ColumnauxConfigModulation | read-write | current | The Modulation used by the modem. With auto(1) the modulation will be automatically chosen. mdm_9600(2) sets the modulation to 9600 bps (V.32). mdm_14400(3) se… |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.5 | ColumnauxConfigDispatch | read-write | current | The dispatch service the modem should be used for. The service could be either ppp(1), isdnlogin(2) or none. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.6 | ColumnauxConfigAPN | read-write | current | GPRS Access Point Name (APN). |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.7 | ColumnauxConfigInit | read-write | current | Additional Modem init sequence. This sequence will be send to the modem to initialize it. Normally this string should be empty (un-used). |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.8 | ColumnauxConfigEscape | read-write | current | Modem escape character. This character is sent to the modem to terminate the session. For GPRS/UMTS modems this parameter should be zero. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.9 | ColumnauxConfigAccessType | read-write | current | The default Access Type used by a GPRS/UMTS modem. This setting works only for vendors who publish the AT commands needed offically in the internet. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.10 | ColumnauxConfigPUK | read-write | current | The PUK code of the SIM card needed to reset the PIN code if the PIN is invalidated. This is used to enter a new PIN code. The PUK isn't stored in the configur… |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.11 | ColumnauxConfigPinData | not-accessible | current | Field used for storing the PIN permanently. |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.12 | ColumnauxConfigRoamingMode | read-write | current | The Roaming configuration for this TTY interface. Possible values are: disabled - no roaming at all auto - roaming decision by modems factory defaults unrestri… |
| 1.3.6.1.4.1.272.4.41.3.1.10.1.13 | ColumnauxConfigRoamingPLMN | read-write | current | The PLMN (Public Land Mobile Netword) code allowed for Roaming. Used only if auxConfigRoamingMode_fixed is selected. |
| 1.3.6.1.4.1.272.4.41.3.1.11 | TableauxStatTable | not-accessible | current | The auxStatTable holds statistics about the corresponding aux device. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1 | RowauxStatEntry | not-accessible | current | A single auxStatTable entry. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.1 | ColumnauxStatIfIndex | read-only | current | The index of the corresponding tty interface. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.2 | ColumnauxStatOperStatus | read-only | current | The operational status of the GSM modem. The following states can occur: - up(1) the device is up - initialization finished - down(2) the device is down - init… |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.3 | ColumnauxStatErrorCode | read-only | current | If an error occurs (OperStatus is set to error) this variable shows the reason for the error. Currently the following error codes are possible: - none(1) no er… |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.4 | ColumnauxStatNetwork | read-only | current | The name of the PLMN (Public Land Mobile Network) actually being used. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.5 | ColumnauxStatCommand | read-only | current | The last Command that was sent to the Modem. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.6 | ColumnauxStatAnswer | read-only | current | The last Answer gotten from the Modem. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.7 | ColumnauxStatCSQ | read-only | current | The GSM receive signal level in decibel (db). A value below -100 signals a very low signal quality. A value between -100 and -80 means that signal quality is l… |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.8 | ColumnauxStatControlChannel | read-only | obsolete | If the UMTS card provides several channels and one could be used to control the card e.g. get status information from the card like the signal quality a dedica… |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.9 | ColumnauxStatAccessType | read-only | obsolete | The Access Type the modem actually registers on. Normally the `edge' or `hs*pa' Access Types aren't provided in detail by the operator. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.10 | ColumnauxStatInDiscards | read-only | current | The number of frames which can't be enqueued upstream. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.11 | ColumnauxStatHomePLMN | read-only | current | The PLMN (Public Land Mobile Network) code of the Home PLMN. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.12 | ColumnauxStatCurrentPLMN | read-only | current | The PLMN (Public Land Mobile Network) code of the Network currently used. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.13 | ColumnauxStatIMEI | read-only | obsolete | The IMEI (International Mobile Equipment Identity) of the detected GSM/UMTS device. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.14 | ColumnauxStatIccId | read-only | obsolete | The ICC-ID of the SIM-Card found in the device which is actually enumerated with auxStatIfIndex. Some UMTS modem vendors offer no capability to read this ID be… |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.15 | ColumnauxStatLocationAreaCode | read-only | current | The actual Location Area Code the UMTS-Modem is registered. This may differ for GSM/UMTS Access Technology. |
| 1.3.6.1.4.1.272.4.41.3.1.11.1.16 | ColumnauxStatCellId | read-only | current | The actual Cell-ID the UMTS-Modem is registered. This may differ for GSM/UMTS Access Technology. |