BINTEC-GPS-MIB
44 objects
The MIB module for GPS data entities.
Imported Objects
| BINTEC-MIB MISSING | bibo Date |
| SNMPv2-SMI | enterprises mib-2 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.68 | IdentitygpsMIB | The MIB module for GPS data entities. | ||
| 1.3.6.1.4.1.272.4.68.1 | NodegpsConfig | |||
| 1.3.6.1.4.1.272.4.68.1.1 | ScalargpsConfigNMEATcpPort | read-write | current | This object represents the TCP port the NMEA data is exported to, use a value of -1 to disable exporting of NMEA data via TCP. |
| 1.3.6.1.4.1.272.4.68.1.2 | ScalargpsConfigTimeUpdate | read-write | current | This object specifies interval for updating the system time via GPS time. -1 means don't use GPS time, 0 update on every GPS fix. |
| 1.3.6.1.4.1.272.4.68.1.3 | ScalargpsConfigOnlineMap | read-write | current | This object enables or disables usgae of online maps in GUI. |
| 1.3.6.1.4.1.272.4.68.2 | NodegpsCoordinates | |||
| 1.3.6.1.4.1.272.4.68.2.1 | ScalargpsCoordinatesLastFix | read-only | current | The time of the last GPS fix. |
| 1.3.6.1.4.1.272.4.68.2.2 | ScalargpsCoordinatesLongDeg | read-only | current | The longitudinal degrees of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.3 | ScalargpsCoordinatesLongMinInt | read-only | current | The integer part of the longitudinal minutes of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.4 | ScalargpsCoordinatesLongMinDec | read-only | current | The decimal part of the longitudinal minutes of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.5 | ScalargpsCoordinatesLongCard | read-only | current | The longitudinal cardinals of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.6 | ScalargpsCoordinatesLatDeg | read-only | current | The latitudinal degrees of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.7 | ScalargpsCoordinatesLatMinInt | read-only | current | The integer part of the latitudinal minutes of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.8 | ScalargpsCoordinatesLatMinDec | read-only | current | The decimal part of the latitudinal minutes of the last fix. |
| 1.3.6.1.4.1.272.4.68.2.9 | ScalargpsCoordinatesLatCard | read-only | current | The latitudinal cardinals of the last fix. |
| 1.3.6.1.4.1.272.4.68.3 | TablegpsZoneTable | not-accessible | current | The (conceptual) table listing GPS zones. |
| 1.3.6.1.4.1.272.4.68.3.1 | RowgpsZoneEntry | not-accessible | current | An entry (conceptual row) representing a GPS zone. A zone is defined by two points A and B. A is the upper left point, B the lower right point. |
| 1.3.6.1.4.1.272.4.68.3.1.1 | ColumngpsZoneIndex | read-create | current | The index of a GPS location zone. |
| 1.3.6.1.4.1.272.4.68.3.1.2 | ColumngpsZonePointALongDeg | read-create | current | Value of the degrees for the longitudinal position of point A. This can vary between 0 and 180. |
| 1.3.6.1.4.1.272.4.68.3.1.3 | ColumngpsZonePointALongMinInt | read-create | current | Value for the whole part of the longitudinal minutes of point A. This can vary between 0 and 59. |
| 1.3.6.1.4.1.272.4.68.3.1.4 | ColumngpsZonePointALongMinDec | read-create | current | Value for the decimal part of the longitudinal minutes of point A. This can vary between 0 and 9999. |
| 1.3.6.1.4.1.272.4.68.3.1.5 | ColumngpsZonePointALongCard | read-create | current | Represents the cardinal point to the longitude where the point is found. This can take the values East and West. Default is West. |
| 1.3.6.1.4.1.272.4.68.3.1.6 | ColumngpsZonePointALatDeg | read-create | current | Value of the degrees for the latitudinal position of point A. This can vary between 0 and 90. |
| 1.3.6.1.4.1.272.4.68.3.1.7 | ColumngpsZonePointALatMinInt | read-create | current | Value for the whole part of the latitudinal minutes of point A. This can vary between 0 and 59. |
| 1.3.6.1.4.1.272.4.68.3.1.8 | ColumngpsZonePointALatMinDec | read-create | current | Value for the decimal part of the latitudinal minutes of point A. This can vary between 0 and 9999. |
| 1.3.6.1.4.1.272.4.68.3.1.9 | ColumngpsZonePointALatCard | read-create | current | Represents the cardinal point to the latitudinal where the point is found. This can take the values north and south. Default is north. |
| 1.3.6.1.4.1.272.4.68.3.1.10 | ColumngpsZonePointBLongDeg | read-create | current | Value of the degrees for the longitudinal position of point B. This can vary between 0 and 180. |
| 1.3.6.1.4.1.272.4.68.3.1.11 | ColumngpsZonePointBLongMinInt | read-create | current | Value for the whole part of the longitudinal minutes of point B. This can vary between 0 and 59. |
| 1.3.6.1.4.1.272.4.68.3.1.12 | ColumngpsZonePointBLongMinDec | read-create | current | Value for the decimal part of the longitudinal minutes of point B. This can vary between 0 and 9999. |
| 1.3.6.1.4.1.272.4.68.3.1.13 | ColumngpsZonePointBLongCard | read-create | current | Represents the cardinal point to the longitude where the point is found. This can take the values East and West. Default is West. |
| 1.3.6.1.4.1.272.4.68.3.1.14 | ColumngpsZonePointBLatDeg | read-create | current | Value of the degrees for the latitudinal position of point B. This can vary between 0 and 90. |
| 1.3.6.1.4.1.272.4.68.3.1.15 | ColumngpsZonePointBLatMinInt | read-create | current | Value for the whole part of the latitudinal minutes of point B. This can vary between 0 and 59. |
| 1.3.6.1.4.1.272.4.68.3.1.16 | ColumngpsZonePointBLatMinDec | read-create | current | Value for the decimal part of the latitudinal minutes of point B. This can vary between 0 and 9999. |
| 1.3.6.1.4.1.272.4.68.3.1.17 | ColumngpsZonePointBLatCard | read-create | current | Represents the cardinal point to the latitudinal where the point is found. This can take the values north and south. Default is north. |
| 1.3.6.1.4.1.272.4.68.3.1.18 | ColumngpsZoneTimeToTrue | read-create | current | This object defines the time that must lapse so the zone can pass from FALSE to TRUE when the device has good GPS coverage. This transition is invoked as the G… |
| 1.3.6.1.4.1.272.4.68.3.1.19 | ColumngpsZoneTimeToFalse | read-create | current | This object define the time that must laspe so the zone can pass from TRUE to FALSE when the device has good GPS coverage. This transition is invoked as the GP… |
| 1.3.6.1.4.1.272.4.68.3.1.20 | ColumngpsZoneHdop | read-create | current | This object configures the HDOP limit value to take the GPS information as valid. When the HDOP calculated by the GPS receiver surpasses the value configured w… |
| 1.3.6.1.4.1.272.4.68.3.1.21 | ColumngpsZoneRowStatus | read-create | current | The row-status of this GPS zone entry. |
| 1.3.6.1.4.1.272.4.68.3.1.22 | ColumngpsZoneValid | read-only | current | This object shows if the current position is in the defined zone (true) or not (false). |
| 1.3.6.1.4.1.272.4.68.3.1.23 | ColumngpsZoneInitialState | read-create | current | This object defines the state the GPS zone must take when the device is switched on and there is no GPS signal available. true: The initial state of the zone i… |
| 1.3.6.1.4.1.272.4.68.3.1.24 | ColumngpsZoneInitialStateTime | read-create | current | This object defines the time for state transition defined by InitialState when the device is switched on and no GPS signal is available. |
| 1.3.6.1.4.1.272.4.68.3.1.25 | ColumngpsZoneCoverageFailState | read-create | current | This object defines the state the GPS zone must take when the GPS receiver loses coverage or doesn't have enough to accurately calculate the geographical posit… |
| 1.3.6.1.4.1.272.4.68.3.1.26 | ColumngpsZoneCoverageFailStateTime | read-create | current | This object defines the time for state transition defined by CoverageFailState when no GPS signal is available. |
| 1.3.6.1.4.1.272.4.68.3.1.27 | ColumngpsZoneDescription | read-write | mandatory | A textual string describing this zone. |