BINTEC-ITP-MIB
17 objects
MIB for ISDN Theft Protection
Imported Objects
| BINTEC-MIB MISSING | BitValue Date HexValue isdn |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6666.1.18 | IdentityitpMIB | MIB for ISDN Theft Protection | ||
| 1.3.6.1.4.1.6666.1.18.1 | Nodeitp | |||
| 1.3.6.1.4.1.6666.1.18.1.1 | NodeitpAdmin | |||
| 1.3.6.1.4.1.6666.1.18.1.1.1 | ScalaritpAdminMode | read-write | current | This object represents the operation mode of the ISDN Theft Protection. In enabled(1) mode ITP is active, setting the mode to disabled(2) ITP is inactive. |
| 1.3.6.1.4.1.6666.1.18.1.1.2 | ScalaritpAdminDialNumber | read-write | current | This represents the number which should be dialled. |
| 1.3.6.1.4.1.6666.1.18.1.1.3 | ScalaritpAdminOutgoingNumber | read-write | current | This represents the number which should be send as outgoing/dialing number. |
| 1.3.6.1.4.1.6666.1.18.1.1.4 | ScalaritpAdminIncomingNumber | read-write | current | This represents the number which an incoming call number should match to. |
| 1.3.6.1.4.1.6666.1.18.1.1.5 | ScalaritpAdminStkMask | read-write | current | This binary number defines the ISDN stack(s) to use. Each bit corresponds to one entry in the isdnStkTable, the rightmost bit selects entry 0, the next bit sel… |
| 1.3.6.1.4.1.6666.1.18.1.1.6 | ScalaritpAdminTimeOut | read-write | current | Sets the TimeOut for a calling try. |
| 1.3.6.1.4.1.6666.1.18.1.1.7 | ScalaritpAdminMaxRetries | read-write | current | The number of retries which should be made before ITP should be set to failed. |
| 1.3.6.1.4.1.6666.1.18.1.1.8 | ScalaritpAdminRetriesStat | read-only | current | Shows how much retries are already made. |
| 1.3.6.1.4.1.6666.1.18.1.1.9 | ScalaritpAdminStatus | read-only | current | Indicates the status of the ISDN Theft Protection. pending(1) means it is still at work, on success the status is successful(2), else the status is failed(3). |
| 1.3.6.1.4.1.6666.1.18.1.2 | TableitpIfTable | not-accessible | current | The itpIfTable contains the interfaces which should be controlled by the ISDN Theft Protection. |
| 1.3.6.1.4.1.6666.1.18.1.2.1 | RowitpIfEntry | not-accessible | current | An entry of the itpIfTable. |
| 1.3.6.1.4.1.6666.1.18.1.2.1.1 | ColumnitpIfAdminMode | read-write | current | Indicates whether this entry should be used for ITP or not. |
| 1.3.6.1.4.1.6666.1.18.1.2.1.2 | ColumnitpIfStartIndex | read-write | current | Defines the index where this range should start. |
| 1.3.6.1.4.1.6666.1.18.1.2.1.3 | ColumnitpIfStopIndex | read-write | current | Defines the index where this range should stop. |