BINTEC-MOBILE-MIB
125 objects
MIB for GSM/UMTS/LTE-Modem support
Imported Objects
| BINTEC-MIB MISSING | BitValue Date HexValue tty |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.41.4 | IdentitymobileMIB | MIB for GSM/UMTS/LTE-Modem support | ||
| 1.3.6.1.4.1.272.4.41.4.1 | Nodemobile | |||
| 1.3.6.1.4.1.272.4.41.4.1.20 | TablemobileDevCfgTable | not-accessible | current | The mobileDevCfgTable configures the detected mobile device identified by the IMEI (International Mobile Equipment Identity). |
| 1.3.6.1.4.1.272.4.41.4.1.20.1 | RowmobileDevCfgEntry | not-accessible | current | A single mobileDevCfgTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.20.1.1 | ColumnmobileDevCfgIMEI | read-write | current | The IMEI (International Mobile Equipment Identity) of the mobile device to configure. |
| 1.3.6.1.4.1.272.4.41.4.1.20.1.2 | ColumnmobileDevCfgInit | read-write | current | Additional Modem hardware init sequence. This sequence will be send to the modem to initialize it. Normally this string should be empty (un-used). |
| 1.3.6.1.4.1.272.4.41.4.1.20.1.3 | ColumnmobileDevCfgGPSEnable | read-write | current | Enables or disables the creation and periodic update of a mobileGPSInfoTable entry. The UMTS Modem Hardware must support GPS functionality. This is indicated b… |
| 1.3.6.1.4.1.272.4.41.4.1.20.1.4 | ColumnmobileDevCfgModulation | read-write | current | The Modulation to be used by the modem. With auto(1) the modulation will be automatically chosen. mdm_9600(2) sets the modulation to 9600 bps (V.32). mdm_14400… |
| 1.3.6.1.4.1.272.4.41.4.1.21 | TablemobileSimCfgTable | not-accessible | current | The mobileSimCfgTable configures each corresponding SIM-Card identified by the cards unique ICC-ID. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1 | RowmobileSimCfgEntry | not-accessible | current | A single mobileSimCfgTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.1 | ColumnmobileSimCfgIccId | read-write | current | The ICC-ID of the used SIM-Card to configure. Unfortunately some UMTS modem vendors offer no capability to read this ID before entering the valid PIN :-( |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.2 | ColumnmobileSimCfgPIN | read-write | current | The PIN code of the SIM card. This is used to authorize the access to the SIM-Card. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.3 | ColumnmobileSimCfgPUK | read-write | current | The PUK code of the SIM card. Needed in case of wrong PIN input for three times in a row. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.4 | ColumnmobileSimCfgAPN | read-write | current | GPRS APN (Access Point Name) used by this SIM-Card. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.5 | ColumnmobileSimCfgAccessMode | read-write | current | The default Access Type to be used by the GPRS/UMTS/LTE Modem. This setting depends on local network availability and therefore it's bound to the network opera… |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.6 | ColumnmobileSimCfgRoamingMode | read-write | current | The Roaming configuration for this mobile interface. Possible values are: disabled - no roaming at all auto - roaming decision by modems factory defaults unres… |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.7 | ColumnmobileSimCfgRoamingPLMN | read-write | current | The PLMN (Public Land Mobile Netword) code used for Roaming. Used only if mobileDevCfgRoamingMode_fixed is selected. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.8 | ColumnmobileSimCfgDispatch | read-write | current | The dispatch service the Modem should be used for. The SIM-Card should support/enable basic functionality to use the service (eg access circuit switched networ… |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.9 | ColumnmobileSimCfgGsmFallback | read-write | current | If the Router is called using the GsmFallback number the actual connection is dropped and the Access Type is switched back from UMTS to GSM. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.15 | ColumnmobileSimCfgCugAddr | read-write | current | The provider assigned IP-Address if any. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.16 | ColumnmobileSimCfgCugAuth | read-write | current | The authentication method to be used. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.17 | ColumnmobileSimCfgCugUser | read-write | current | The provider assigned user name. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.18 | ColumnmobileSimCfgCugPwd | read-write | current | The provider assigned password. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.19 | ColumnmobileSimCfgOperatorScan | read-write | current | Handling of scanning available Providers (PLMN) never - use only home or fixed PLMN startup - scan on startup, only for information always - used for using roa… |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.20 | ColumnmobileSimCfgPinData | not-accessible | current | Not accessible entry for storing the PIN permanently. This is a security feature (?) used by France Telecom. |
| 1.3.6.1.4.1.272.4.41.4.1.21.1.21 | ColumnmobileSimCfgCugAPN | read-write | current | Closed User Group authentication APN, may be different from registration APN. |
| 1.3.6.1.4.1.272.4.41.4.1.22 | TablemobileStatTable | not-accessible | current | The mobileStatTable holds statistics about the actually detected and/or used mobile device. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1 | RowmobileStatEntry | not-accessible | current | A single mobileStatTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.1 | ColumnmobileStatIfIndex | read-only | current | The interface index of the corresponding TTY interface. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.2 | ColumnmobileStatOperStatus | read-only | current | The operational status of the GSM modem. The following states can occur: - up(1) the device is up - initialization finished - down(2) the device is down - init… |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.3 | ColumnmobileStatErrorCode | read-only | current | If an error occurs (OperStatus is set to error) this variable shows the reason for the error. Currently the following error codes are possible: - none(1) no er… |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.4 | ColumnmobileStatCommand | read-only | current | The last command that was sent to the mobile device. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.5 | ColumnmobileStatAnswer | read-only | current | The last answer received from the mobile device. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.6 | ColumnmobileStatInDiscards | read-only | current | The number of frames which can't be enqueued upstream. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.7 | ColumnmobileStatSelectedPLMN | read-only | current | The PLMN (Public Land Mobile Network) code of the Network currently selected. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.8 | ColumnmobileStatNetwork | read-only | current | The name of the PLMN (Public Land Mobile Network) actually being used. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.9 | ColumnmobileStatLocationAreaCode | read-only | current | The actual Location Area Code the UMTS-Modem is registered. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.10 | ColumnmobileStatCellId | read-only | current | The actual Cell-ID the UMTS-Modem is registered. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.11 | ColumnmobileStatAccessType | read-only | current | The Access Type the modem actually registers on. Normally the `edge' or `hs*pa' Access Types aren't provided in detail by the network operator and/or modem. Po… |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.12 | ColumnmobileStatCSQ | read-only | current | The GSM receive signal level in decibel (db). A value below -100 signals a very low signal quality. A value between -100 and -80 means that signal quality is l… |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.13 | ColumnmobileStatIMEI | read-only | current | The IMEI (International Mobile Equipment Identity) of the detected mobile device. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.14 | ColumnmobileStatCtrlIfIndex | read-only | current | If the UMTS card provides several channels and one could be used to control the card e.g. get status information from the card like the signal quality a dedica… |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.15 | ColumnmobileStatGpsSupport | read-only | current | Signals for configuration software if the hardware is capable to deliver GPS information. - none(1) no GPS support - available(2) GPS support available |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.16 | ColumnmobileStatIccId | read-only | current | The ICC-ID of the SIM-Card found in the mobile device which is actually enumerated with mobileStatIfIndex. Some UMTS modem vendors offer no capability to read … |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.17 | ColumnmobileStatHomePLMN | read-only | current | The PLMN (Public Land Mobile Network) code of the Home PLMN. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.18 | ColumnmobileStatSubscriberNumber | read-only | current | The Subscriber Number stored on the SIM card. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.19 | ColumnmobileStatServiceCenterAddr | read-only | current | The Service Center Address stored on the SIM card. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.20 | ColumnmobileStatLteSupport | read-only | current | Signals for configuration software if the hardware is capable to attach to LTE networks. - none(1) no LTE support - available(2) LTE support available |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.21 | ColumnmobileStatBand | read-only | current | The Band Class currently used. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.22 | ColumnmobileStatSmsStorageBits | read-only | current | The SMS storage types supported by the modem hardware. |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.23 | ColumnmobileStatAction | read-write | current | Perform extern triggered Action on sierra wireless modems - idle no waiting Action - reset reset the modem - qmi switch modem into qmi mode - dip switch modem … |
| 1.3.6.1.4.1.272.4.41.4.1.22.1.24 | ColumnmobileStatATexec | read-write | current | Perform a User requested AT Command in idle state |
| 1.3.6.1.4.1.272.4.41.4.1.23 | TablemobileOperatorTable | not-accessible | current | The mobileOperatorTable shows the actually available network provider and the registration status. |
| 1.3.6.1.4.1.272.4.41.4.1.23.1 | RowmobileOperatorEntry | not-accessible | current | A single mobileOperatorTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.1 | ColumnmobileOperatorIfIndex | read-only | current | The index of the corresponding TTY interface. |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.2 | ColumnmobileOperatorCode | read-only | current | The PLMN code of the network operator. |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.3 | ColumnmobileOperatorAcT | read-only | current | The Access Type the modem actually registers on. Normally the `edge' or `hs*pa' Access Types aren't provided in detail by the network operator and/or modem. Po… |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.4 | ColumnmobileOperatorStatus | read-only | current | The registration status depending on the network operator. The following states can occur: - unknown(1) - available(2) - current(3) - forbidden(4) |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.5 | ColumnmobileOperatorName | read-only | current | The name of the network operator. |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.6 | ColumnmobileOperatorPriority | read-only | current | The Priority of the Operator to use in roaming mode. There are different priority value ranges for the following types of operator entries: - Home Operator (fr… |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.7 | ColumnmobileOperatorPreference | read-only | current | The registration priority for the network operator. The following states can occur: - home(1) - privileged(2) - preferred(3) - practicable(4) - banned(5) - adm… |
| 1.3.6.1.4.1.272.4.41.4.1.23.1.8 | ColumnmobileOperatorCurrentOrder | read-only | current | The order of the entry in the currently used internal roaming list, the value '-1' indicates an unused (ignored) entry. |
| 1.3.6.1.4.1.272.4.41.4.1.24 | TablemobileSmsSendTable | not-accessible | current | The mobileSmsSendTable holds all information to send a SMS (Short Message Service) via a GSM/UMTS modem. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1 | RowmobileSmsSendEntry | not-accessible | current | A single mobileSmsSendTable entry. This entry is temporary until it's successfully sent. After being successfully sent this entry is copied to the mobileSmsTab… |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.1 | ColumnmobileSmsSendId | read-write | current | A unique ID generated by the application which triggers the SMS send request. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.2 | ColumnmobileSmsSendIfIndex | read-write | current | The interface index of the mobile device which should transmit the SMS. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.3 | ColumnmobileSmsSendMsgStorage | read-write | current | This object specifies the storage which holds the SMS. Available storages are: sm(1) me(2) The default of this object is 'me' because mobile equipment offers m… |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.4 | ColumnmobileSmsSendMsgSlot | read-only | current | The actual index to address the SMS in 'mobileSmsSendMsgStorage'. This index is returned by the mobile device after the store operation is successfully finishe… |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.5 | ColumnmobileSmsSendMsgStatus | read-write | current | The Status of the SMS. To start transmission of the SMS set Status to `transmit(1)'. On successful transmission the Status is set to `success(2)'. Afterwards t… |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.6 | ColumnmobileSmsSendDestAddr | read-write | current | The destination address of this SMS. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.7 | ColumnmobileSmsSendMsgFormat | read-write | current | The message format of the SMS. Traditional SMS use plain `txt(2)' format. Special or Unicode SMS use `pdu(1)' format. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.8 | ColumnmobileSmsSendMsgCoding | read-write | current | This object specifies the coding of the SMS user data section. |
| 1.3.6.1.4.1.272.4.41.4.1.24.1.9 | ColumnmobileSmsSendMsgData | read-write | current | The raw text data of the SMS depending on the coding. |
| 1.3.6.1.4.1.272.4.41.4.1.25 | TablemobileSmsTable | not-accessible | current | The mobileSmsTable holds all SMS (Short Message Service) which are stored in the GSM/UMTS modem and/or on the SIM- Card used. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1 | RowmobileSmsEntry | not-accessible | current | A single mobileSmsTable entry. Each entry is a copy of a SMS stored in the GSM/UMTS modem and/or on the SIM-Card used. Status information like 'received-unread… |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.1 | ColumnmobileSmsIfIndex | read-only | current | The interface index of the mobile device which received the SMS or should transmit it. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.2 | ColumnmobileSmsMsgStorage | read-only | current | This object specifies the storage which holds the SMS. Available storages are: sm(1) me(2) mt(3) bm(4) ta(5) sr(6) |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.3 | ColumnmobileSmsMsgSlot | read-only | current | The actual index to address the SMS in 'mobileSmsMsgStorage'. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.4 | ColumnmobileSmsMsgStatus | read-write | current | The status of the SMS. The first four states correspond with 3GPP TS27.005. For incoming SMS the Status is set to `rec-unread(1)'. After reading the SMS the St… |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.5 | ColumnmobileSmsServiceCenterTimeStamp | read-only | current | The date/time the SMS is sent or received. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.6 | ColumnmobileSmsServiceCenterAddress | read-only | current | The Service Center Address used to send or receive this SMS. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.7 | ColumnmobileSmsPhoneNumber | read-only | current | The origination or destination address of this SMS depending on the value of 'mobileSmsMsgStatus'. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.8 | ColumnmobileSmsMsgFormat | read-only | current | The message format of the SMS. Traditional SMS use plain `txt(2)' format. Special or Unicode SMS use `pdu(1)' format. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.9 | ColumnmobileSmsMsgCoding | read-only | current | This object specifies the coding of the SMS user data section. |
| 1.3.6.1.4.1.272.4.41.4.1.25.1.10 | ColumnmobileSmsMsgData | read-only | current | The raw data of the complete SMS. |
| 1.3.6.1.4.1.272.4.41.4.1.26 | TablemobileGPSInfoTable | not-accessible | current | The mobileGPSInfoTable shows the actually available GPS information if supported by the Hardware. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1 | RowmobileGPSInfoEntry | not-accessible | current | A single mobileGPSInfoTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.1 | ColumnmobileGPSInfoIfIndex | read-only | current | The index of the corresponding TTY interface. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.2 | ColumnmobileGPSInfoOperStatus | read-only | current | The operation status of the UMTS modems internal GPS module. The following states can occur: - unknown(1) - down(2) - init(3) - up(4) |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.3 | ColumnmobileGPSInfoDate | read-only | current | The actual date calculated from GPS info. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.4 | ColumnmobileGPSInfoTime | read-only | current | The actual time calculated from GPS info. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.5 | ColumnmobileGPSInfoLatitude | read-only | current | The actual Latitude calculated from GPS info. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.6 | ColumnmobileGPSInfoLongitude | read-only | current | The actual Longitude calculated from GPS info. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.7 | ColumnmobileGPSInfoSpeedOverGround | read-only | current | The actually detected Speed over Ground. |
| 1.3.6.1.4.1.272.4.41.4.1.26.1.8 | ColumnmobileGPSInfoNumberOfSatelites | read-only | current | The number of satelites actually found by the GPS module. |
| 1.3.6.1.4.1.272.4.41.4.1.27 | TablemobilePLMNTable | not-accessible | current | The mobilePLMNTable holds the PLMN (Public Land Mobile Network) codes known by the mobile device. This table is used to translate PLMN code into name. |
| 1.3.6.1.4.1.272.4.41.4.1.27.1 | RowmobilePLMNEntry | not-accessible | current | A single mobilePLMNTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.27.1.1 | ColumnmobilePLMNCode | read-only | current | The PLMN (Public Land Mobile Network) code of the network operator. This code is merged from the MCC (Mobile Country Code) and MNC (Mobile Network Code) of the… |
| 1.3.6.1.4.1.272.4.41.4.1.27.1.2 | ColumnmobilePLMNName | read-only | current | The name of the network operator. |
| 1.3.6.1.4.1.272.4.41.4.1.28 | TablemobileOperatorPLMNTable | not-accessible | current | The mobileOperatorPLMNTable shows the Operator_controlled_PLMN (Public Land Mobile Networks) codes accessible by the SIM-Card. |
| 1.3.6.1.4.1.272.4.41.4.1.28.1 | RowmobileOperatorPLMNEntry | not-accessible | current | A single mobileOperatorPLMNTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.28.1.1 | ColumnmobileOperatorPLMNIccId | read-only | current | The ICC-ID of the SIM-Card. The Operator PLMN List is copied from this SIM-Card. |
| 1.3.6.1.4.1.272.4.41.4.1.28.1.2 | ColumnmobileOperatorPLMNCode | read-only | current | The PLMN Code is built from a 3 digit MCC (Mobile Country Code) and 2 or 3 digit MNC (Mobile Network Code). |
| 1.3.6.1.4.1.272.4.41.4.1.28.1.3 | ColumnmobileOperatorPLMNName | read-only | current | The name of the network operator. |
| 1.3.6.1.4.1.272.4.41.4.1.28.1.4 | ColumnmobileOperatorPLMNAllowGSM | read-only | current | The Access Right to register to GSM Access Technology. |
| 1.3.6.1.4.1.272.4.41.4.1.28.1.5 | ColumnmobileOperatorPLMNAllowUMTS | read-only | current | The Access Right to register to UMTS Access Technology. |
| 1.3.6.1.4.1.272.4.41.4.1.29 | TablemobilePdpContextTable | not-accessible | current | The mobilePdpContextTable shows the PDP (Packet Data Protocol) context stored in the detected mobile device. The mobile device is identified by the unique IMEI… |
| 1.3.6.1.4.1.272.4.41.4.1.29.1 | RowmobilePdpContextEntry | not-accessible | current | A single mobilePdpContextTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.1 | ColumnmobilePdpContextIndex | read-only | current | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.2 | ColumnmobilePdpContextIfIndex | read-only | current | The interface index of the corresponding TTY interface. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.3 | ColumnmobilePdpContextPrimaryId | read-only | current | The primary PDP context identifier. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.4 | ColumnmobilePdpContextSecondaryId | read-only | current | Shows the secondary PDP context identifier (non-zero). In case of a primary PDP context this object is zero. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.5 | ColumnmobilePdpContextType | read-only | current | The protocol type of the PDP context. This object is unused in case of a secondary PDP context. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.6 | ColumnmobilePdpContextAPN | read-only | current | The APN (Access Point Name) used by the PDP context. This object is unused in case of a secondary PDP context. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.7 | ColumnmobilePdpContextPreferredAddress | read-only | current | The preferred (IP-)Address assigned to the PDP context. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.8 | ColumnmobilePdpContextDataCompression | read-only | current | The data compression used for data connections. This object is normally unused in 2G/3G/4G networks. |
| 1.3.6.1.4.1.272.4.41.4.1.29.1.9 | ColumnmobilePdpContextHeaderCompression | read-only | current | The header compression used for data connections. This object is normally unused in 2G/3G/4G networks. |
| 1.3.6.1.4.1.272.4.41.4.1.30 | TablemobileAdmOperatorTable | not-accessible | current | The mobileAdmOperatorTable shows the configured preferred PLMNs. |
| 1.3.6.1.4.1.272.4.41.4.1.30.1 | RowmobileAdmOperatorEntry | not-accessible | current | A single mobileAdmOperatorTable entry. |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.1 | ColumnmobileAdmOperatorIccId | read-write | current | The ICC-ID of the SIM-Card. The operator is assigned to this SIM Id. |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.2 | ColumnmobileAdmOperatorCode | read-write | current | The PLMN Code is built from a 3 digit MCC (Mobile Country Code) and 2 or 3 digit MNC (Mobile Network Code). |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.3 | ColumnmobileAdmOperatorName | read-write | current | The name of the network operator. |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.4 | ColumnmobileAdmOperatorAcT | read-write | current | The AcT defines the Access technologies gsm - G2 connectivity umts - G3 connectivity lte - G4 connectivity |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.5 | ColumnmobileAdmOperatorPriority | read-write | current | This value represents the relative priority of this entry. it is added to the admistrative base priority (see 'mobileOperatorPriority') to be used afterwards f… |
| 1.3.6.1.4.1.272.4.41.4.1.30.1.6 | ColumnmobileAdmOperatorStatus | read-write | current | The operator's status. permit - the operator is allowed for roaming. deny - the operator is forbidden to use. delete - delete this entry |