BLADE-MIB
2882 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | -- DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.3 | NodeibmAgents | |||
| 1.3.6.1.4.1.2.3.51 | NodenetfinitySupportProcessorAgent | |||
| 1.3.6.1.4.1.2.3.51.2 | NodebladeCenterSnmpMIB | |||
| 1.3.6.1.4.1.2.3.51.2.2 | Nodemonitors | |||
| 1.3.6.1.4.1.2.3.51.2.2.1 | Nodetemperature | |||
| 1.3.6.1.4.1.2.3.51.2.2.1.1 | NodeplanarTemp | |||
| 1.3.6.1.4.1.2.3.51.2.2.1.1.2 | ScalarmmTemp | read-only | mandatory | Management module temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space… |
| 1.3.6.1.4.1.2.3.51.2.2.1.5 | NodeambientTemp | |||
| 1.3.6.1.4.1.2.3.51.2.2.1.5.1 | ScalarfrontPanelTemp | read-only | mandatory | The front panel temperature in degrees centigrade(C). This is surrounding temperature where the system is installed. An octet string expressed as 'sddd.dd Cent… |
| 1.3.6.1.4.1.2.3.51.2.2.1.5.2 | ScalarfrontPanel2Temp | read-only | mandatory | The front panel 2 temperature in degrees centigrade(C). This is surrounding temperature where the system is installed. An octet string expressed as 'sddd.dd Ce… |
| 1.3.6.1.4.1.2.3.51.2.2.2 | Nodevoltage | |||
| 1.3.6.1.4.1.2.3.51.2.2.2.1 | NodeplanarVolt | |||
| 1.3.6.1.4.1.2.3.51.2.2.2.1.1 | Scalarplus5Volt | read-only | mandatory | +5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for posit… |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.2 | Scalarplus3Pt3Volt | read-only | mandatory | +3.3 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for pos… |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.3 | Scalarplus12Volt | read-only | mandatory | +12 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for posi… |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.5 | Scalarminus5Volt | read-only | mandatory | -5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for posit… |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.6 | Scalarplus2Pt5Volt | read-only | mandatory | +2.5 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for pos… |
| 1.3.6.1.4.1.2.3.51.2.2.2.1.8 | Scalarplus1Pt8Volt | read-only | mandatory | +1.8 Volt power supply voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for pos… |
| 1.3.6.1.4.1.2.3.51.2.2.3 | Nodeblowers | |||
| 1.3.6.1.4.1.2.3.51.2.2.3.1 | Scalarblower1speed | read-only | mandatory | Blower 1 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading … |
| 1.3.6.1.4.1.2.3.51.2.2.3.2 | Scalarblower2speed | read-only | mandatory | Blower 2 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading … |
| 1.3.6.1.4.1.2.3.51.2.2.3.3 | Scalarblower3speed | read-only | mandatory | Blower 3 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading … |
| 1.3.6.1.4.1.2.3.51.2.2.3.4 | Scalarblower4speed | read-only | mandatory | Blower 4 speed expressed in percent(%) of maximum RPM. An octet string expressed as 'ddd% of maximum' where: d is a decimal digit or blank space for a leading … |
| 1.3.6.1.4.1.2.3.51.2.2.3.10 | Scalarblower1State | read-only | mandatory | The health state for blower 1. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.11 | Scalarblower2State | read-only | mandatory | The health state for blower 2. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.12 | Scalarblower3State | read-only | mandatory | The health state for blower 3. NOTE: This MIB object is for BladeCenter T and BladeCenter S only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.13 | Scalarblower4State | read-only | mandatory | The health state for blower 4. NOTE: This MIB object is for BladeCenter T and BladeCenter S only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.20 | Scalarblower1speedRPM | read-only | mandatory | Blower 1 speed expressed in RPM. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. Th… |
| 1.3.6.1.4.1.2.3.51.2.2.3.21 | Scalarblower2speedRPM | read-only | mandatory | Blower 2 speed expressed in RPM. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. Th… |
| 1.3.6.1.4.1.2.3.51.2.2.3.22 | Scalarblower3speedRPM | read-only | mandatory | Blower 3 speed expressed in RPM. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. Th… |
| 1.3.6.1.4.1.2.3.51.2.2.3.23 | Scalarblower4speedRPM | read-only | mandatory | Blower 4 speed expressed in RPM. If the blower is determined not to be running or the blower speed cannot be determined, the string will indicate 'Offline'. Th… |
| 1.3.6.1.4.1.2.3.51.2.2.3.30 | Scalarblower1ControllerState | read-only | mandatory | The health state for the controller for blower 1. NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only. NOTE: Blo… |
| 1.3.6.1.4.1.2.3.51.2.2.3.31 | Scalarblower2ControllerState | read-only | mandatory | The health state for the controller for blower 2. NOTE: This MIB object is for AMM installed in BladeCenter H, BladeCenter HT and BladeCenter S only. NOTE: Blo… |
| 1.3.6.1.4.1.2.3.51.2.2.3.32 | Scalarblower3ControllerState | read-only | mandatory | The health state for the controller for blower 3. NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only. NOTE: Blowers are also r… |
| 1.3.6.1.4.1.2.3.51.2.2.3.33 | Scalarblower4ControllerState | read-only | mandatory | The health state for the controller for blower 4. NOTE: This MIB object is for AMM installed in BladeCenter HT and BladeCenter S only. NOTE: Blowers are also r… |
| 1.3.6.1.4.1.2.3.51.2.2.3.40 | Scalarblower1ExhaustTemp | read-only | mandatory | The exhaust temperature in degrees Celsius for blower 1. NOTE: This MIB object is for BCS only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.41 | Scalarblower2ExhaustTemp | read-only | mandatory | The exhaust temperature in degrees Celsius for blower 2. NOTE: This MIB object is for BCS only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.42 | Scalarblower3ExhaustTemp | read-only | mandatory | The exhaust temperature in degrees Celsius for blower 3. NOTE: This MIB object is for BCS only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.3.43 | Scalarblower4ExhaustTemp | read-only | mandatory | The exhaust temperature in degrees Celsius for blower 4. NOTE: This MIB object is for BCS only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.4 | NodepowerModuleHealth | |||
| 1.3.6.1.4.1.2.3.51.2.2.4.1 | TablepowerModuleHealthTable | not-accessible | mandatory | Table of power module health information. Contains the power health information for each power module. |
| 1.3.6.1.4.1.2.3.51.2.2.4.1.1 | RowpowerModuleHealthEntry | not-accessible | mandatory | Power Module health entry |
| 1.3.6.1.4.1.2.3.51.2.2.4.1.1.1 | ColumnpowerModuleIndex | read-only | mandatory | Power module sequence index. |
| 1.3.6.1.4.1.2.3.51.2.2.4.1.1.2 | ColumnpowerModuleExists | read-only | mandatory | Indicates whether the power module specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.4.1.1.3 | ColumnpowerModuleState | read-only | mandatory | The health state for the power module. |
| 1.3.6.1.4.1.2.3.51.2.2.4.1.1.4 | ColumnpowerModuleDetails | read-only | mandatory | The details for this power module. |
| 1.3.6.1.4.1.2.3.51.2.2.5 | NodespStatus | |||
| 1.3.6.1.4.1.2.3.51.2.2.5.2 | NodemmBistAndChassisStatus | |||
| 1.3.6.1.4.1.2.3.51.2.2.5.2.1 | ScalarbistSdram | read-only | deprecated | MM BIST DRAM test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.2 | ScalarbistRs485Port1 | read-only | mandatory | MM BIST RS 485 legacy test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.3 | ScalarbistRs485Port2 | read-only | mandatory | MM BIST RS 485 local bus test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.4 | ScalarbistNvram | read-only | deprecated | MM BIST NVRAM test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.5 | ScalarbistRtc | read-only | mandatory | MM BIST Real Time Clock test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.7 | ScalarbistLocalI2CBus | read-only | mandatory | MM BIST Local I2C bus test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.8 | ScalarbistPrimaryMainAppFlashImage | read-only | mandatory | MM BIST Primary Main Application Firmware test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.9 | ScalarbistSecondaryMainAppFlashImage | read-only | mandatory | MM BIST Secondary Main Application test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.10 | ScalarbistBootRomFlashImage | read-only | mandatory | MM BIST Boot Firmware test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.11 | ScalarbistEthernetPort1 | read-only | mandatory | MM BIST external ethernet port test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.12 | ScalarbistEthernetPort2 | read-only | deprecated | MM BIST internal ethernet port test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.13 | ScalarbistInternalPCIBus | read-only | deprecated | MM BIST PCI bus test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.14 | ScalarbistExternalI2CDevices | read-only | mandatory | MM BIST external I2C devices test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.15 | ScalarbistUSBController | read-only | deprecated | MM BIST USB controller test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.16 | ScalarbistVideoCompressorBoard | read-only | deprecated | MM BIST Video Compressor Board test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.17 | ScalarbistRemoteVideo | read-only | deprecated | MM BIST Remote Video test result. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.18 | ScalarbistPrimaryBus | read-only | mandatory | MM BIST primary mid-plane bus test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.19 | ScalarbistInternalEthernetSwitch | read-only | mandatory | MM BIST internal external switch test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.20 | ScalarbistVideoCapture | read-only | mandatory | MM BIST video capture test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.21 | ScalarbistUSBKeyboardMouseEmulation | read-only | mandatory | MM BIST USB keyboard and mouse test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.22 | ScalarbistUSBMassStorageEmulation | read-only | mandatory | MM BIST mass storage emulation test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.23 | ScalarbistUSBKeyboardMouseFirmware | read-only | mandatory | MM BIST USB keyboard and mouse firmware test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.24 | ScalarbistUSBMassStorageFirmware | read-only | mandatory | MM BIST USB keyboard mouse firmware test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.25 | ScalarbistPrimaryCore | read-only | mandatory | MM BIST primary core test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.26 | ScalarbistSecondaryCore | read-only | mandatory | MM BIST secondary core test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.27 | ScalarbistInternalIOExpander | read-only | mandatory | MM BIST internal IO expander test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.28 | ScalarbistRemoteControlFirmware | read-only | mandatory | MM BIST Remote Control firmware test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.29 | ScalarbistPhysicalNetworkLink | read-only | mandatory | MM BIST Physical Network Link test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.30 | ScalarbistLogicalNetworkLink | read-only | mandatory | MM BIST Logical Network Link test result. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.33 | ScalarbistBladesInstalled | read-only | mandatory | The blades that are installed on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.49 | ScalarbistBladesCommunicating | read-only | mandatory | The blades that are communicating on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.65 | ScalarbistBlowersInstalled | read-only | mandatory | The blowers that are installed on the chassis. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as t… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.73 | ScalarbistBlowersFunctional | read-only | mandatory | The blowers installed on the chassis that are functional. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is a… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.74 | ScalarbistMediaTrayInstalled | read-only | mandatory | Indicates whether a media tray is installed on the chassis. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.75 | ScalarbistMediaTrayCommunicating | read-only | mandatory | Indicates whether a media tray is communicating. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.76 | ScalarbistOtherMMInstalled | read-only | mandatory | Indicates whether a redundant MM is installed. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.77 | ScalarbistOtherMMCommunicating | read-only | mandatory | Indicates whether a redundant MM is communicating. |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.81 | ScalarbistPowerModulesInstalled | read-only | mandatory | The power modules that are installed on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is … |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.89 | ScalarbistPowerModulesFunctional | read-only | mandatory | The power modules that are functional on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.97 | ScalarbistSwitchModulesInstalled | read-only | mandatory | The switch modules that are installed on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that i… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.113 | ScalarbistSwitchModulesCommunicating | read-only | mandatory | The switch modules that are communicating on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's th… |
| 1.3.6.1.4.1.2.3.51.2.2.5.2.200 | ScalarbistLastUpdate | read-only | mandatory | It is the time when the primary MM updated the last BIST results. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3 | NodermmBistAndChassisStatus | |||
| 1.3.6.1.4.1.2.3.51.2.2.5.3.2 | ScalarrbistRs485Port1 | read-only | mandatory | Standby MM BIST RS 485 legacy test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.3 | ScalarrbistRs485Port2 | read-only | mandatory | Standby MM BIST RS 485 local bus test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.5 | ScalarrbistRtc | read-only | mandatory | Standby MM BIST Real Time Clock test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.7 | ScalarrbistLocalI2CBus | read-only | mandatory | Standby MM BIST Local I2C bus test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.8 | ScalarrbistPrimaryMainAppFlashImage | read-only | mandatory | Standby MM BIST Primary Main Application Firmware test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.9 | ScalarrbistSecondaryMainAppFlashImage | read-only | mandatory | Standby MM BIST Secondary Main Application test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.10 | ScalarrbistBootRomFlashImage | read-only | mandatory | Standby MM BIST Boot Firmware test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.11 | ScalarrbistEthernetPort1 | read-only | mandatory | Standby MM BIST external ethernet port test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.14 | ScalarrbistExternalI2CDevices | read-only | mandatory | Standby MM BIST external I2C devices test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpdate… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.19 | ScalarrbistInternalEthernetSwitch | read-only | mandatory | Standby MM BIST internal external switch test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.20 | ScalarrbistVideoCapture | read-only | mandatory | Standby MM BIST video capture test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpdateTimePri… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.21 | ScalarrbistUSBKeyboardMouseEmulation | read-only | mandatory | Standby MM BIST USB keyboard and mouse test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpda… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.22 | ScalarrbistUSBMassStorageEmulation | read-only | mandatory | Standby MM BIST mass storage emulation test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpda… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.23 | ScalarrbistUSBKeyboardMouseFirmware | read-only | mandatory | Standby MM BIST USB keyboard and mouse firmware test result collected when the standby MM was primary. The time of the last update can be obtained by querying … |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.24 | ScalarrbistUSBMassStorageFirmware | read-only | mandatory | Standby MM BIST USB keyboard mouse firmware test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbis… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.25 | ScalarrbistPrimaryCore | read-only | mandatory | Standby MM BIST primary core test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.26 | ScalarrbistSecondaryCore | read-only | mandatory | Standby MM BIST secondary core test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.27 | ScalarrbistInternalIOExpander | read-only | mandatory | Standby MM BIST internal IO expander test result. The time of the last update can be obtained by querying rbistUpdateTime object. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.28 | ScalarrbistRemoteControlFirmware | read-only | mandatory | Standby MM BIST Remote Control firmware test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpd… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.29 | ScalarrbistPhysicalNetworkLink | read-only | mandatory | Standby MM BIST Physical Network Link test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpdat… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.30 | ScalarrbistLogicalNetworkLink | read-only | mandatory | Standby MM BIST Logical Network Link test result collected when the standby MM was primary. The time of the last update can be obtained by querying rbistUpdate… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.33 | ScalarrbistBladesInstalled | read-only | mandatory | The blades that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimePrim… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.49 | ScalarrbistBladesCommunicating | read-only | mandatory | The blades that were communicating on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTime… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.65 | ScalarrbistBlowersInstalled | read-only | mandatory | The blowers that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimePri… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.73 | ScalarrbistBlowersFunctional | read-only | mandatory | The blowers installed on the chassis that were functional when the standby MM was once primary. The time of the last update can be obtained by querying rbistUp… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.74 | ScalarrbistMediaTrayInstalled | read-only | mandatory | Indicates whether a media tray was installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbist… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.75 | ScalarrbistMediaTrayCommunicating | read-only | mandatory | Indicates whether a media tray was communicating when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateTimeP… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.76 | ScalarrbistOtherMMInstalled | read-only | mandatory | Indicates whether a standby MM was installed when the standby MM was once primary.The time of the last update can be obtained by querying rbistUpdateTimePrimar… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.77 | ScalarrbistOtherMMCommunicating | read-only | mandatory | Indicates whether a standby MM was communicating when the standby MM was once primary. The time of the last update can be gotten from the object 'rbistUpdateTi… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.81 | ScalarrbistPowerModulesInstalled | read-only | mandatory | The power modules that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdateT… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.89 | ScalarrbistPowerModulesFunctional | read-only | mandatory | The power modules that were functional on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdate… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.97 | ScalarrbistSwitchModulesInstalled | read-only | mandatory | The switch modules that were installed on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpdate… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.113 | ScalarrbistSwitchModulesCommunicating | read-only | mandatory | The switch modules that are communicating on the chassis when the standby MM was once primary. The time of the last update can be obtained by querying rbistUpd… |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.200 | ScalarrbistUpdateTime | read-only | mandatory | It is the time when the standby MM updated the last BIST results. |
| 1.3.6.1.4.1.2.3.51.2.2.5.3.201 | ScalarrbistLastUpdatePrimary | read-only | mandatory | It is the time when the standby MM updated the last BIST results when it was still primary. |
| 1.3.6.1.4.1.2.3.51.2.2.6 | NodefanPack | |||
| 1.3.6.1.4.1.2.3.51.2.2.6.1 | TablefanPackTable | not-accessible | mandatory | Table of fan pack information. Contains the information for each fan pack. NOTE: Fan packs are also referred to as Power Module Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1 | RowfanPackEntry | not-accessible | mandatory | Fan Pack entry |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.1 | ColumnfanPackIndex | read-only | mandatory | Fan Pack sequence index. |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.2 | ColumnfanPackExists | read-only | mandatory | Indicates whether the fan pack specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.3 | ColumnfanPackState | read-only | mandatory | The health state for the fan pack. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.4 | ColumnfanPackFanCount | read-only | mandatory | The number of fans in the fan pack. |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.5 | ColumnfanPackAverageSpeed | read-only | mandatory | The average speed of all fans in the fan pack expressed in percent(%) of maximum RPM. If the fan pack is determined not to be running or the fan pack speed can… |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.6 | ColumnfanPackAverageSpeedRPM | read-only | mandatory | The average speed of all fans in the fan pack expressed in RPM. If the fan pack is determined not to be running or the fan pack speed cannot be determined, the… |
| 1.3.6.1.4.1.2.3.51.2.2.6.1.1.7 | ColumnfanPackControllerState | read-only | mandatory | The health state for the controller for the fan pack. 0 = operational, 1 = flashing in progress, 2 = not present, 3 = communication error, 255 = unknown |
| 1.3.6.1.4.1.2.3.51.2.2.7 | NodesystemHealth | |||
| 1.3.6.1.4.1.2.3.51.2.2.7.1 | ScalarsystemHealthStat | read-only | mandatory | Indicates status of system health for the system in which the MM resides. Value of 'critical' indicates a severe error has occurred and the system may not be f… |
| 1.3.6.1.4.1.2.3.51.2.2.7.2 | TablesystemHealthSummaryTable | not-accessible | mandatory | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. NOTE: This MIB object is for BladeCe… |
| 1.3.6.1.4.1.2.3.51.2.2.7.2.1 | RowsystemHealthSummaryEntry | not-accessible | mandatory | System Health Summary entry NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.7.2.1.1 | ColumnsystemHealthSummaryIndex | read-only | mandatory | System health summary index. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.7.2.1.2 | ColumnsystemHealthSummarySeverity | read-only | mandatory | System health summary severity. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.7.2.1.3 | ColumnsystemHealthSummaryDescription | read-only | mandatory | System health summary description. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.7.2.1.4 | ColumnsystemHealthSummaryDateTime | read-only | mandatory | System health summary date time. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.8 | Nodeleds | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.1 | NodefrontPanelLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.1.1 | ScalarsystemErrorLED | read-only | mandatory | Indicates whether the front panel system error LED is on or off. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.1.2 | ScalarinformationLED | read-write | mandatory | Indicates whether the front panel system information LED is on or off. For Write access, the LED can be turned off only. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.8.1.3 | ScalartemperatureLED | read-only | mandatory | Indicates whether the front panel temperature LED is on or off. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.1.4 | ScalaridentityLED | read-write | mandatory | Indicates whether the front panel identity LED is on or off. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2 | NodebladeLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1 | TablebladeLEDsTable | not-accessible | mandatory | Table of blade status information. NOTE: Querying objects in this table may take significantly longer than normal, so it is recommended that the query timeout … |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1 | RowbladeLEDsEntry | not-accessible | mandatory | Blade system status entry |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.1 | ColumnledBladeIndex | read-only | mandatory | Blade LED table index. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.2 | ColumnledBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.3 | ColumnledBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.4 | ColumnledBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.5 | ColumnledBladeHealthState | read-only | mandatory | The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings ex… |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.6 | ColumnledBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.7 | ColumnledBladeSystemError | read-only | mandatory | Indicates whether the blade system error LED is on or off. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.8 | ColumnledBladeInformation | read-write | mandatory | Indicates whether the blade information LED is on or off. For Write access, the LED can be turned off only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.9 | ColumnledBladeKVM | read-only | mandatory | Indicates whether the blade KVM LED is on, off, or blinking. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.10 | ColumnledBladeMediaTray | read-only | mandatory | Indicates whether the blade media tray LED is on, off, or blinking. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.1.1.11 | ColumnledBladeIdentity | read-write | mandatory | Indicates whether the blade identify LED is on, off, or blinking. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2 | TablebladeLEDsDetailsTable | not-accessible | mandatory | Table of blade LEDs detailed information. NOTE: Querying objects in this table may take significantly longer than normal, so it is recommended that the query t… |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1 | RowbladeLEDsDetailsEntry | not-accessible | mandatory | Blade LEDs Details entry |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.1 | ColumnledIndex | read-only | mandatory | The LED index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.2 | ColumnledBladeBayNumber | read-only | mandatory | The bay number of the main server blade that the LED is grouped into. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.3 | ColumnledBladeComponentType | read-only | mandatory | Type of the component/subcomponent grouping for this LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.4 | ColumnledBladeLabel | read-only | mandatory | Text label for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.5 | ColumnledBladeState | read-only | mandatory | Text description which denotes color or on/off/blink state for a LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.2.2.1.6 | ColumnledBladeLocation | read-only | mandatory | Location of this LED. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3 | NodetelcoPanelLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.3.1 | ScalarcriticalLED | read-only | mandatory | Indicates whether the BladeCenter T Panel CRT (Critical) LED is on or off. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3.2 | ScalarmajorLED | read-only | mandatory | Indicates whether the BladeCenter T Panel MJR (Major) LED is on or off. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3.3 | ScalarminorLED | read-only | mandatory | Indicates whether the BladeCenter T Panel MNR (Minor) LED is on or off. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3.4 | ScalartelcoIdentityLED | read-write | mandatory | Indicates whether the BladeCenter T Panel identity LED is on or off. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3.5 | ScalartelcoColorSel | read-write | mandatory | Indicates whether the BladeCenter T Critical and Major LEDs are displayed in amber or red color. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.3.6 | ScalarcriticalityAssertionMode | read-write | mandatory | Indicates whether the BladeCenter T Criticality Assertion Mode is enabled or disabled. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.4 | NodesmLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.4.1 | TablesmLEDsTable | not-accessible | mandatory | Table of switch module LEDs information. |
| 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1 | RowsmLEDsEntry | not-accessible | mandatory | Switch module LEDs information entry |
| 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.1 | ColumnledSMIndex | read-only | mandatory | Switch module LEDs table index. |
| 1.3.6.1.4.1.2.3.51.2.2.8.4.1.1.2 | ColumnledSMLEDs | read-only | mandatory | A bitmap of LEDs information on the selected switch module. The bitmap is a string containing a list of 1's and 0's. Every 4 bytes are used to represent a led … |
| 1.3.6.1.4.1.2.3.51.2.2.8.5 | NodeblowerLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1 | TableblowerLEDsTable | not-accessible | mandatory | Table of blower LEDs information. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1.1 | RowblowerLEDsEntry | not-accessible | mandatory | Blower LEDs information entry |
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.1 | ColumnledBlowerIndex | read-only | mandatory | Blower LEDs table index. |
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.2 | ColumnledBlowerId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.3 | ColumnledBlowerExists | read-only | mandatory | Indicates whether the blower specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.8.5.1.1.4 | ColumnledBlowerError | read-only | mandatory | Indicates whether the blower error LED is on, off, or not available. |
| 1.3.6.1.4.1.2.3.51.2.2.8.6 | NodefanPackLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1 | TablefanPackLEDsTable | not-accessible | mandatory | Table of fan pack LEDs information. NOTE: Fan packs are also referred to as Power Module Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1.1 | RowfanPackLEDsEntry | not-accessible | mandatory | Fan Pack LEDs information entry |
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.1 | ColumnledFanPackIndex | read-only | mandatory | Fan Pack LEDs table index. |
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.2 | ColumnledFanPackId | read-only | mandatory | The numeric fan pack ID. |
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.3 | ColumnledFanPackExists | read-only | mandatory | Indicates whether the fan pack specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.8.6.1.1.4 | ColumnledFanPackError | read-only | mandatory | Indicates whether the fan pack error LED is on or off. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7 | NodemtStatusLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1 | TablemtStatusLEDsTable | not-accessible | mandatory | Table of Media Tray Status LEDs information. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1.1 | RowmtStatusLEDsEntry | not-accessible | mandatory | Media Tray Status LEDs information entry. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.1 | ColumnledMediaTrayIndex | read-only | mandatory | Media Tray Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.2 | ColumnledMediaTrayId | read-only | mandatory | The numeric Media Tray ID. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.3 | ColumnledMediaTrayExists | read-only | mandatory | Indicates whether the Media Tray exists or not. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.7.1.1.5 | ColumnledMediaTrayFault | read-only | mandatory | Indicates whether the Media Tray Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.8 | NodetapStatusLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.8.3 | ScalartapExists | read-only | mandatory | Indicates whether the Alarm Panel exists or not. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.8.4 | ScalartapFRRLED | read-only | mandatory | Indicates whether the Alarm Panel Safe To Remove LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.8.5 | ScalartapFaultLED | read-only | mandatory | Indicates whether the Alarm Panel Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9 | NodencStatusLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1 | TablencStatusLEDsTable | not-accessible | deprecated | Table of Network Clock Status LEDs information. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1 | RowncStatusLEDsEntry | not-accessible | deprecated | Network Clock Status LEDs information entry. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.1 | ColumnledNetworkClockIndex | read-only | deprecated | Network Clock Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.2 | ColumnledNetworkClockId | read-only | deprecated | The numeric Network Clock ID. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.3 | ColumnledNetworkClockExists | read-only | deprecated | Indicates whether the Network Clock exists or not. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.4 | ColumnledNetworkClockFRR | read-only | deprecated | Indicates whether the Network Clock Safe To Remove LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.9.1.1.5 | ColumnledNetworkClockFault | read-only | deprecated | Indicates whether the Network Clock Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10 | NodemxStatusLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1 | TablemxStatusLEDsTable | not-accessible | mandatory | Table of Multiplexer Expansion Module Status LEDs information. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1 | RowmxStatusLEDsEntry | not-accessible | mandatory | Multiplexer Expansion Module Status LEDs information entry. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.1 | ColumnledMuxIndex | read-only | mandatory | Multiplexer Expansion Module Status LEDs table index. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.2 | ColumnledMuxId | read-only | mandatory | The numeric Multiplexer Expansion Module ID. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.3 | ColumnledMuxExists | read-only | mandatory | Indicates whether the Multiplexer Expansion Module exists or not. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.4 | ColumnledMuxFRR | read-only | mandatory | Indicates whether the Multiplexer Expansion Module Safe To Remove LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.10.1.1.5 | ColumnledMuxFault | read-only | mandatory | Indicates whether the Multiplexer Expansion Module Fault LED is on or off. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11 | NodestorageLEDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1 | TablestorageLEDsTable | not-accessible | mandatory | Table of storage module LEDs information. NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1.1 | RowstorageLEDsEntry | not-accessible | mandatory | Storage Module LEDs information entry NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.1 | ColumnledStorageIndex | read-only | mandatory | Storage Module LEDs table index. NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.2 | ColumnledStorageId | read-only | mandatory | The numeric storage module ID. NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.3 | ColumnledStorageExists | read-only | mandatory | Indicates whether the storage module specified exists or not. NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.8.11.1.1.4 | ColumnledStorageError | read-only | mandatory | Indicates the status of the storage module error LED. NOTE: This MIB object is for BladeCenter S only. |
| 1.3.6.1.4.1.2.3.51.2.2.9 | NodetelcoSystemHealth | |||
| 1.3.6.1.4.1.2.3.51.2.2.9.1 | ScalartelcoSystemHealthStat | read-only | mandatory | Indicates status of system health for the system in which the MM resides. Value of 'critical' indicates a non-recoverable service affecting condition has occur… |
| 1.3.6.1.4.1.2.3.51.2.2.9.2 | TabletelcoSystemHealthSummaryTable | not-accessible | mandatory | Table of System Health summary. Contains more detailed information about the reasons for the overall system health status. NOTE: This MIB object is for BladeCe… |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1 | RowtelcoSystemHealthSummaryEntry | not-accessible | mandatory | BladeCenter T System Health Summary entry. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.1 | ColumntelcoSystemHealthSummaryIndex | read-only | mandatory | BladeCenter T System Health Summary Index. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.2 | ColumntelcoSystemHealthSummarySeverity | read-only | mandatory | BladeCenter T System Health Summary Severity. The values and meanings are as follows: 0x06 Critical-Power 0x05 Critical 0x04 Major-Power 0x03 Major 0x02 Minor-… |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.3 | ColumntelcoSystemHealthSummaryDescription | read-only | mandatory | BladeCenter T System Health Summary Description. NOTE: This MIB object is for BladeCenter T only. NOTE: If no alarms are in progress, this object contains 'No … |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.4 | ColumntelcoSystemHealthSummaryEventName | read-only | mandatory | BladeCenter T System Health Summary Event Name. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.5 | ColumntelcoSystemHealthSummaryEventKeyID | read-only | mandatory | BladeCenter T System Health Summary Event Key ID. An octet string expressed as 'mmm:ggg:iii:aaa:sss' where: m : Module ID value of decimal digits(1-255) or bla… |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.6 | ColumntelcoSystemHealthSummaryAcknowledge | read-only | mandatory | BladeCenter T System Health Summary Acknowledge. Indicates whether the alarm event is acknowledged or unacknowledged. NOTE: This MIB object is for BladeCenter … |
| 1.3.6.1.4.1.2.3.51.2.2.9.2.1.7 | ColumntelcoSystemHealthSummaryAssertTime | read-only | mandatory | BladeCenter T System Health Summary Assert Time. NOTE: This MIB object is for BladeCenter T only. NOTE: If no alarms are in progress, this object contains 'No … |
| 1.3.6.1.4.1.2.3.51.2.2.10 | NodefuelGauge | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.1 | NodefuelGaugeInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1 | TablefuelGaugeTable | not-accessible | mandatory | Table of Fuel Gauge information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1 | RowfuelGaugeEntry | not-accessible | mandatory | Fuel Gauge entry |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.1 | ColumnfuelGaugeIndex | read-only | mandatory | Fuel Gauge Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.2 | ColumnfuelGaugePowerDomainNumber | read-only | mandatory | Fuel Gauge Table Power Domain Number. |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.3 | ColumnfuelGaugeStatus | read-only | mandatory | Fuel Gauge Table Status for the power domain. The response will start out with a numeric value (0 = unknown, 1 = good, 2 = warning, and 3: bad), followed by a … |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.4 | ColumnfuelGaugeFirstPowerModule | read-only | mandatory | Fuel Gauge Table First Power Module capacity in Watts in the power domain. NOTE: First power module in power domain 1 and 2 is in bay 1 and 3 respectively. |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.5 | ColumnfuelGaugeSecondPowerModule | read-only | mandatory | Fuel Gauge Table Second Power Module capacity in Watts in the power domain. NOTE: Second power module in power domain 1 and 2 is in bay 2 and 4 respectively. |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.6 | ColumnfuelGaugePowerManagementPolicySetting | read-only | mandatory | Fuel Gauge Table for the Power Management Policy Setting for each power domain. When a 1200W or 1400W power module is installed in the domain the power managem… |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.7 | ColumnfuelGaugeTotalPower | read-only | mandatory | This field displays the total available power for each power domain based on installed power modules and the current Power Management Policy Setting. When a 12… |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.8 | ColumnfuelGaugeAllocatedPower | read-only | mandatory | This field displays the power that has been reserved in each power domain. NOTE: 1) Power is always reserved in domain 1 for two management modules and two I/O… |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.9 | ColumnfuelGaugeRemainingPower | read-only | mandatory | This field displays the remaining power available in each domain. Remaining Power = Total Power minus Power In Use When a 1200W or 1400W power module is instal… |
| 1.3.6.1.4.1.2.3.51.2.2.10.1.1.1.10 | ColumnfuelGaugePowerInUsed | read-only | mandatory | This field displays the total power being used in each power domain. When a 1200W or 1400W power module is installed in the domain the power management policy … |
| 1.3.6.1.4.1.2.3.51.2.2.10.2 | NodepowerDomain1 | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1 | TablepowerDomain1Table | not-accessible | mandatory | Table of Power Domain 1. NOTE: Blowers are also referred to as Chassis Cooling Devices. NOTE: Fan packs are also referred to as Power Module Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1 | RowpowerDomain1Entry | not-accessible | mandatory | Fuel Gauge entry |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.1 | Columnpd1Index | read-only | mandatory | Power Domain 1 Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.2 | Columnpd1BayNumber | read-only | mandatory | Power Domain 1 Table Bay Number. The following Bay Number IDs are used in the BladeCenter: notApplicable(1), notApplicable(2), blowerBay1(3), blowerBay2(4), ma… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.3 | Columnpd1BladePrimarySlot | read-only | mandatory | Power Domain 1 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is d… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.4 | Columnpd1ModuleStatus | read-only | mandatory | Power Domain 1 Table Module Throttle Status. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.5 | Columnpd1ModuleName | read-only | mandatory | Power Domain 1 Table Module Name. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.6 | Columnpd1ModuleState | read-only | mandatory | Power Domain 1 Table Module State. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7 | Columnpd1ModuleAllocatedPowerCurrent | read-only | mandatory | Power Domain 1 Table Allocated Power Current indicates the current power allocation for the module in Watts. When a 1200W or 1400W power module is installed in… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.8 | Columnpd1ModuleAllocatedPowerMax | read-only | mandatory | Power Domain 1 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the mo… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.9 | Columnpd1ModuleAllocatedPowerMin | read-only | mandatory | Power Domain 1 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of t… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.10 | Columnpd1ModuleCPUDutyCycles | read-only | mandatory | Power Domain 1 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that som… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.11 | Columnpd1ModuleThrottle | read-only | mandatory | Power Domain 1 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. When a 1200W or 1400W power module is installed in t… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.12 | Columnpd1ModulePowerCapabilities | read-only | mandatory | Power Domain 1 Table Module Power Capabilities. staticPowerManagement: the module with the static worst case power values. fixedPowermanagement: the module wit… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.13 | Columnpd1ModuleMeasuredOrStatic | read-only | mandatory | Power Domain 1 Table Module Measured Or Static. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3 | NodepowerDomain1PowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.1 | Scalarpd1PowerTrendingPeriod | read-write | mandatory | Specify time period for power domain 1 power trending information table view. NOTE: This time period should be configured before displaying the following Power… |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.10 | Tablepd1PowerTrendingSampleTable | not-accessible | mandatory | Table of Power Domain 1 Power Trending Information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1 | Rowpd1PowerTrendingSampleEntry | not-accessible | mandatory | Power Domain 1 Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.1 | Columnpd1PowerTrendingSampleIndex | read-only | mandatory | Power Domain 1 Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.2 | Columnpd1PowerTrendingSampleTimeStamp | read-only | mandatory | Power Domain 1 Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.2.3.10.1.3 | Columnpd1PowerTrendingSampleAve | read-only | mandatory | Power Domain 1 Power Trending Table Average Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3 | NodepowerDomain2 | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1 | TablepowerDomain2Table | not-accessible | mandatory | Table of Power Domain 2. NOTE: Blowers are also referred to as Chassis Cooling Devices. NOTE: Fan packs are also referred to as Power Module Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1 | RowpowerDomain2Entry | not-accessible | mandatory | Fuel Gauge entry |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.1 | Columnpd2Index | read-only | mandatory | Power Domain 2 Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.2 | Columnpd2BayNumber | read-only | mandatory | Power Domain 2 Table Bay Number. The following Bay Number IDs are used in the BladeCenter: serverBladeBay7(1), serverBladeBay8(2), serverBladeBay9(3), serverBl… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.3 | Columnpd2BladePrimarySlot | read-only | mandatory | Power Domain 2 Table Blade Primary Slot can be useful when a server blade spans multiple slots (e.g. double wide or triple wide). For example if the blade is d… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.4 | Columnpd2ModuleStatus | read-only | mandatory | Power Domain 2 Table Module throttle status. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.5 | Columnpd2ModuleName | read-only | mandatory | Power Domain 2 Table Module Name. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.6 | Columnpd2ModuleState | read-only | mandatory | Power Domain 2 Table Power State. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.7 | Columnpd2ModuleAllocatedPowerCurrent | read-only | mandatory | Power Domain 2 Table Allocated Power Current indicates the current power allocation for the module. When a 1200W or 1400W power module is installed in the doma… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.8 | Columnpd2ModuleAllocatedPowerMax | read-only | mandatory | Power Domain 2 Table Allocated Power Max indicates the maximum power allocation for the module in Watts. It is indicative of the maximum amount of power the mo… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.9 | Columnpd2ModuleAllocatedPowerMin | read-only | mandatory | Power Domain 2 Table Allocated Power Min indicates the minumum power allocation for the module in Watts. It is indicative of the minumum power consumption of t… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.10 | Columnpd2ModuleCPUDutyCycles | read-only | mandatory | Power Domain 2 Table Module CPUs Duty Cycles applies to blade servers only. It displays the duty cycle for each CPU on the blade as a percentage. Note that som… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.11 | Columnpd2ModuleThrottle | read-only | mandatory | Power Domain 2 Table Module Throttle indicates whether the server blade may be allowed to throttle or not. When a 1200W or 1400W power module is installed in t… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.12 | Columnpd2ModulePowerCapabilities | read-only | mandatory | Power Domain 2 Table Module Power Capabilities. staticPowerManagement: the module with the static worst case power values. fixedPowermanagement: the module wit… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.1.1.13 | Columnpd2ModuleMeasuredOrStatic | read-only | mandatory | Power Domain 2 Table Module Measured Or Static. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3 | NodepowerDomain2PowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.1 | Scalarpd2PowerTrendingPeriod | read-write | mandatory | Specify time period for power domain 2 power trending information table view. NOTE: This time period should be configured before displaying the following Power… |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.10 | Tablepd2PowerTrendingSampleTable | not-accessible | mandatory | Table of Power Domain 2 Power Trending Sample Information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1 | Rowpd2PowerTrendingSampleEntry | not-accessible | mandatory | Power Domain 2 Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.1 | Columnpd2PowerTrendingSampleIndex | read-only | mandatory | Power Domain 2 Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.2 | Columnpd2PowerTrendingSampleTimeStamp | read-only | mandatory | Power Domain 2 Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.3.3.10.1.3 | Columnpd2PowerTrendingSampleAve | read-only | mandatory | Power Domain 2 Power Trending Sample Table Average Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4 | NodemoduleInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1 | NodebladeDetails | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1 | TablebladeDetailsTable | not-accessible | mandatory | Table of Blade Module Details. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1 | RowbladeDetailsEntry | not-accessible | mandatory | Blade Module Details entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.1 | ColumnbladeDetailsIndex | read-only | mandatory | Blade Module Details Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.2 | ColumnbladeDetailsId | read-only | mandatory | Blade Module Details Table Blade Id. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.3 | ColumnbladeDetailsMaxPowerConfig | read-write | mandatory | Blade Module Details Table Maximum Power Configuration. Allow the user to set the maximum power that can be used by the blade. This function is also known as p… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.4 | ColumnbladeDetailsEffectiveClockRate | read-only | mandatory | Blade Module Details Table Effective CPU Clock Rate applies to DPM blades only. It displays processor's effective clock rate based on sample interval. Note tha… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.5 | ColumnbladeDetailsMaximumClockRate | read-only | mandatory | Blade Module Details Table Maximum CPU Clock Rate applies to DPM blades only. It displays processor's maximum clock rate based on sample interval. Note that so… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.6 | ColumnbladeDetailsPowerSaverMode | read-write | mandatory | When enabled, the static low power saver mode allows the blade to selectively alter its operating voltage and frequency to reduce power consumption. This featu… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.7 | ColumnbladeDetailsDynamicPowerSaver | read-write | mandatory | When enabled, Dynamic Power Saver allows the voltage and frequency of the CPUs on the blade to be controlled based on how busy the CPU is. This feature is not … |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.8 | ColumnbladeDetailsDynamicPowerFavorPerformanceOverPower | read-write | mandatory | When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and mem… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.1.1.9 | ColumnbladeDetailsPowerControl | read-write | mandatory | This object is used to get or set the power control setting on a blade. If dynamic power mgmt is not supported on a blade, notApplicable(255) will be returned.… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3 | NodebladePowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.1 | ScalarbladePowerTrendingPeriod | read-write | mandatory | Specify time period for blade module power trending information table view. NOTE: This time period should be configured before displaying the following Power T… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.2 | ScalarbladePowerTrendingBladeId | read-write | mandatory | Blade Module Power Trending Blade Id. NOTE: The Blade Id should be configured before displaying the bladePowerTrendingTable. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10 | TablebladePowerTrendingSampleTable | not-accessible | mandatory | Table of Blade Module Power Trending Information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1 | RowbladePowerTrendingSampleEntry | not-accessible | mandatory | Blade Module Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.1 | ColumnbladePowerTrendingSampleIndex | read-only | mandatory | Blade Module Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.2 | ColumnbladePowerTrendingSampleId | read-only | mandatory | Blade Module Power Trending Sample Table Blade Id. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.3 | ColumnbladePowerTrendingSampleTimeStamp | read-only | mandatory | Blade Module Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.4 | ColumnbladePowerTrendingSampleMax | read-only | mandatory | Blade Module Power Trending Sample Table Maximum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.5 | ColumnbladePowerTrendingSampleMin | read-only | mandatory | Blade Module Power Trending Sample Table Minimum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.1.3.10.1.6 | ColumnbladePowerTrendingSampleAve | read-only | mandatory | Blade Module Power Trending Sample Table Average Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2 | NodeswitchDetails | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3 | NodeswitchPowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.1 | ScalarswitchPowerTrendingPeriod | read-write | mandatory | Specify time period for switch module power trending information table view. NOTE: This time period should be configured before displaying the following Power … |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.2 | ScalarswitchPowerTrendingSwitchId | read-write | mandatory | Switch Module Power Trending Switch Id. NOTE: The Switch Id should be configured before displaying the switchPowerTrendingTable. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10 | TableswitchPowerTrendingSampleTable | not-accessible | mandatory | Table of Switch Module Power Trending Information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1 | RowswitchPowerTrendingSampleEntry | not-accessible | mandatory | Switch Module Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.1 | ColumnswitchPowerTrendingSampleIndex | read-only | mandatory | Switch Module Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.2 | ColumnswitchPowerTrendingSampleId | read-only | mandatory | Switch Module Power Trending Sample Table Switch Id. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.3 | ColumnswitchPowerTrendingSampleTimeStamp | read-only | mandatory | Switch Module Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.4 | ColumnswitchPowerTrendingSampleMax | read-only | mandatory | Switch Module Power Trending Sample Table Maximum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.5 | ColumnswitchPowerTrendingSampleMin | read-only | mandatory | Switch Module Power Trending Sample Table Minimum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.2.3.10.1.6 | ColumnswitchPowerTrendingSampleAve | read-only | mandatory | Switch Module Power Trending Sample Table Average Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3 | NodeblowerDetails | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3 | NodeblowerPowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.1 | ScalarblowerPowerTrendingPeriod | read-write | mandatory | Specify time period for blower module power trending information table view. NOTE: This time period should be configured before displaying the following Power … |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.2 | ScalarblowerPowerTrendingBlowerId | read-write | mandatory | Blower Module Power Trending Blower Id. NOTE: The Blower Id should be configured before displaying the blowerPowerTrendingTable. NOTE: Blowers are also referre… |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10 | TableblowerPowerTrendingSampleTable | not-accessible | mandatory | Table of Blower Module Power Trending Information. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1 | RowblowerPowerTrendingSampleEntry | not-accessible | mandatory | Blower Module Power Trending Sample entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.1 | ColumnblowerPowerTrendingSampleIndex | read-only | mandatory | Blower Module Power Trending Sample Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.2 | ColumnblowerPowerTrendingSampleId | read-only | mandatory | Blower Module Power Trending Sample Table Blower Id. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.3 | ColumnblowerPowerTrendingSampleTimeStamp | read-only | mandatory | Blower Module Power Trending Sample Table Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.4 | ColumnblowerPowerTrendingSampleMax | read-only | mandatory | Blower Module Power Trending Sample Table Maximum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.5 | ColumnblowerPowerTrendingSampleMin | read-only | mandatory | Blower Module Power Trending Sample Table Minimum Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.4.3.3.10.1.6 | ColumnblowerPowerTrendingSampleAve | read-only | mandatory | Blower Module Power Trending Sample Table Average Power. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5 | NodechassisInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1 | NodechassisConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1.1 | ScalarchassisTotalDCPowerAvailable | read-only | mandatory | Chassis total DC power available, which displays the total DC power available for the entire chassis. It is the sum of the two power domains. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1.2 | ScalarchassisTotalACPowerInUsed | read-only | mandatory | Chassis total AC power being used, which displays the total AC power being consumed by all modules in the chassis. It also includes power consumed by the blowe… |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1.3 | ScalarchassisTotalThermalOutput | read-only | mandatory | Chassis total thermal output, which displays the thermal output (load) in BTUs per hour. It is calculated based on the total AC power in use. (1 Watt = 3.412 B… |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1.4 | ScalarchassisTrendingSampleInterval | read-write | mandatory | Chassis Power and Thermal Trending Sample Interval. 0 means no trending. the minimum interval is 10 minutes and the maximum is 60 minutes, in 5 minute incremen… |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.1.5 | ScalarchassisPowerService | read-only | mandatory | The chassis power service mode. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3 | NodechassisPowerTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.1 | ScalarchassisPowerTrendingPeriod | read-write | mandatory | Specify time period of power trending information. NOTE: This time period should be configured before displaying the following Power Trending Information table… |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.10 | TablechassisPowerTrendingSampleTable | not-accessible | mandatory | Table of Chassis Power Trending Sample Information in specified time period. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1 | RowchassisPowerTrendingSampleEntry | not-accessible | mandatory | Chassis Power Trending Sample entry in specified time period. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.1 | ColumnchassisPowerTrendingSampleIndex | read-only | mandatory | Chassis Power Trending Sample Index in specified time period. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.2 | ColumnchassisPowerTrendingSampleTimeStamp | read-only | mandatory | Chassis Power Trending Sample Timestamp in specified time period. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.3.10.1.3 | ColumnchassisPowerTrendingSampleAve | read-only | mandatory | Chassis Power Trending Sample Average Power in specified time period. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5 | NodechassisThermalTrending | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.1 | ScalarchassisThermalTrendingPeriod | read-write | mandatory | Specify time period of thermal trending information. NOTE: This time period should be configured before displaying the following Thermal Trending Information t… |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.10 | Tablemt1ThermalTrendingTable | not-accessible | mandatory | Table of Media Tray 1 Thermal Trending Information. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1 | Rowmt1ThermalTrendingEntry | not-accessible | mandatory | Media Tray 1 Thermal Trending entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.1 | Columnmt1ThermalTrendingIndex | read-only | mandatory | Media Tray 1 Thermal Trending Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.2 | Columnmt1ThermalTrendingTimeStamp | read-only | mandatory | Media Tray 1 Thermal Trending Table Sample Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.10.1.3 | Columnmt1ThermalTrendingTemperature | read-only | mandatory | Media Tray 1 Thermal Trending Table Temperature. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.15 | Tablemt2ThermalTrendingTable | not-accessible | mandatory | Table of Media Tray 2 Thermal Trending Information. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1 | Rowmt2ThermalTrendingEntry | not-accessible | mandatory | Media Tray 2 Thermal Trending entry. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.1 | Columnmt2ThermalTrendingIndex | read-only | mandatory | Media Tray 2 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.2 | Columnmt2ThermalTrendingTimeStamp | read-only | mandatory | Media Tray 2 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.15.1.3 | Columnmt2ThermalTrendingTemperature | read-only | mandatory | Media Tray 2 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.20 | Tableblower1ThermalTrendingTable | not-accessible | mandatory | Table of Blower 1 Thermal Trending Information. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1 | Rowblower1ThermalTrendingEntry | not-accessible | mandatory | Blower 1 Thermal Trending entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.1 | Columnblower1ThermalTrendingIndex | read-only | mandatory | Blower 1 Thermal Trending Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.2 | Columnblower1ThermalTrendingTimeStamp | read-only | mandatory | Blower 1 Thermal Trending Table Sample Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.20.1.3 | Columnblower1ThermalTrendingTemperature | read-only | mandatory | Blower 1 Thermal Trending Table Temperature. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.30 | Tableblower2ThermalTrendingTable | not-accessible | mandatory | Table of Blower 2 Thermal Trending Information. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1 | Rowblower2ThermalTrendingEntry | not-accessible | mandatory | Blower Thermal 2 Trending entry. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.1 | Columnblower2ThermalTrendingIndex | read-only | mandatory | Blower 2 Thermal Trending Table Index. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.2 | Columnblower2ThermalTrendingTimeStamp | read-only | mandatory | Blower 2 Thermal Trending Table Sample Timestamp. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.30.1.3 | Columnblower2ThermalTrendingTemperature | read-only | mandatory | Blower 2 Thermal Trending Table Temperature. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.40 | Tableblower3ThermalTrendingTable | not-accessible | mandatory | Table of Blower 3 Thermal Trending Information. NOTE: This MIB object is for BladeCenter T only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1 | Rowblower3ThermalTrendingEntry | not-accessible | mandatory | Blower 3 Thermal Trending entry. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.1 | Columnblower3ThermalTrendingIndex | read-only | mandatory | Blower 3 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.2 | Columnblower3ThermalTrendingTimeStamp | read-only | mandatory | Blower 3 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.40.1.3 | Columnblower3ThermalTrendingTemperature | read-only | mandatory | Blower 3 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.50 | Tableblower4ThermalTrendingTable | not-accessible | mandatory | Table of Blower 4 Thermal Trending Information. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1 | Rowblower4ThermalTrendingEntry | not-accessible | mandatory | Blower 4 Thermal Trending entry. NOTE: This MIB object is for BladeCenter T only. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.1 | Columnblower4ThermalTrendingIndex | read-only | mandatory | Blower 4 Thermal Trending Table Index. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.2 | Columnblower4ThermalTrendingTimeStamp | read-only | mandatory | Blower 4 Thermal Trending Table Sample Timestamp. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.5.5.50.1.3 | Columnblower4ThermalTrendingTemperature | read-only | mandatory | Blower 4 Thermal Trending Table Temperature. NOTE: This MIB object is for BladeCenter T only. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6 | NodepowerPolicyInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1 | TablepowerPolicyTable | not-accessible | mandatory | Table of Power Policy information for all power domains. Reading this table can tell you about the available power policies that can be configured for a domain… |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1 | RowpowerPolicyEntry | not-accessible | mandatory | Power Policy Entry |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.1 | ColumnpowerPolicyIndex | read-only | mandatory | The unique idenitifier of a row in the powerPolicyTable. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.2 | ColumnpowerPolicyPowerDomainNumber | read-only | mandatory | The power domain number which this row is associated with. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.3 | ColumnpowerPolicyName | read-only | mandatory | The short name of the power policy. The following are the possible names and their detailed description: Power Module Redundancy Intended for a single AC power… |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.4 | ColumnpowerPolicyPwrSupplyFailureLimit | read-only | mandatory | The maximum number of power supplies that can fail in a chassis while still providing redundancy. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.5 | ColumnpowerPolicyMaxPowerLimit | read-only | mandatory | The maximum power available (in watts), based on the number of power modules and the Power Management Policy setting. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.6 | ColumnpowerPolicyEstimatedUtilization | read-only | mandatory | The estimated utilization (as a percentage) based on current power usage. |
| 1.3.6.1.4.1.2.3.51.2.2.10.6.1.1.7 | ColumnpowerPolicyActivate | read-write | mandatory | When read, this object provides the status of this power policy. If the value is enabled(1), it means this is the active power policy for the associated domain… |
| 1.3.6.1.4.1.2.3.51.2.2.12 | Nodefrontbezel | |||
| 1.3.6.1.4.1.2.3.51.2.2.12.1 | ScalarfrontbezelExists | read-only | mandatory | Indicates whether the front bezel is installed or not. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.17 | Nodeusers | |||
| 1.3.6.1.4.1.2.3.51.2.2.17.1 | NodemmUsers | |||
| 1.3.6.1.4.1.2.3.51.2.2.17.1.1 | TablecurrentlyLoggedInTable | not-accessible | mandatory | Table of MM users currently logged in. NOTE: This MIB object is for AMM only. |
| 1.3.6.1.4.1.2.3.51.2.2.17.1.1.1 | RowcurrentlyLoggedInEntry | not-accessible | mandatory | MM users currently logged in entries. NOTE: This MIB object is for AMM only. |
| 1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.1 | ColumncurrentlyLoggedInEntryIndex | read-only | mandatory | Index for MM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.2 | ColumncurrentlyLoggedInEntryUserId | read-only | mandatory | Name for MM users currently logged in. NOTE: 'Default SNMPv1 user' indicates an internal user used by SNMPv1 agent. |
| 1.3.6.1.4.1.2.3.51.2.2.17.1.1.1.3 | ColumncurrentlyLoggedInEntryAccMethod | read-only | mandatory | Access method for MM users currently logged in. |
| 1.3.6.1.4.1.2.3.51.2.2.20 | NodemonitorThresholds | |||
| 1.3.6.1.4.1.2.3.51.2.2.20.2 | NodevoltageThresholds | |||
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1 | TablevoltageThresholdsTable | not-accessible | mandatory | Table of voltage threshold entries. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1 | RowvoltageThresholdsEntry | not-accessible | mandatory | Voltage threshold entries. NOTE: This MIB object is for BladeCenter only. |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.1 | ColumnvoltageThresholdEntryIndex | read-only | mandatory | Index for voltage threshold entry. |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.2 | ColumnvoltageThresholdEntryName | read-only | mandatory | Voltage threshold entry null terminated string that contains the power supply's name, for example '+5V'. |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.3 | ColumnvoltageThresholdEntryCurrentValue | read-only | mandatory | Voltage reading expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive) d is a decimal d… |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.6 | ColumnvoltageThresholdEntryWarningHighValue | read-only | mandatory | Voltage threshold reading expressed in Volts(V). If the voltage rises above this value, a warning alert/event, if enabled, will be generated. An octet string e… |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.7 | ColumnvoltageThresholdEntryWarningResetHighValue | read-only | mandatory | Voltage threshold reading expressed in Volts(V). If the voltage rises above this value and if a warning alert/event had previously been created, then the alert… |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.10 | ColumnvoltageThresholdEntryWarningLowValue | read-only | mandatory | Voltage threshold reading expressed in Volts(V). If the voltage drops below this value, a warning alert/event, if enabled, will be generated. An octet string e… |
| 1.3.6.1.4.1.2.3.51.2.2.20.2.1.1.11 | ColumnvoltageThresholdEntryWarningResetLowValue | read-only | mandatory | Voltage threshold reading expressed in Volts(V). If the voltage drops below this value and if a warning alert/event had previously been created, then the alert… |
| 1.3.6.1.4.1.2.3.51.2.2.21 | NodevpdInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.1 | NodechassisVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1 | NodebladeCenterVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.1 | ScalarbladeCenterVpdMachineType | read-write | mandatory | Machine type VPD information (from System BIOS). This field must be four alpha numeric characters. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.2 | ScalarbladeCenterVpdMachineModel | read-write | mandatory | Machine model VPD information (from System BIOS). This field must be three alpha numeric characters. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.3 | ScalarbladeCenterSerialNumber | read-write | mandatory | Machine serial number VPD information (from System BIOS). This field must be seven alpha numeric characters. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.4 | ScalarbladeCenterUUID | read-write | mandatory | Machine UUID (Universal Unique ID information) (from System BIOS). This field must be 32 alpha numeric characters. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.5 | ScalarbladeCenterManufacturingId | read-only | mandatory | Machine chassis manufacturing ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.6 | ScalarbladeCenterHardwareRevision | read-only | mandatory | Machine chassis hardware revision. If a hardware revision is programmed in the OEM VPD area for this component, then the HardwareRevisionString version of this… |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.7 | ScalarbladeCenterFruNumber | read-only | mandatory | Machine chassis FRU number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.8 | ScalarbladeCenterManufDate | read-only | mandatory | Machine chassis manufacture date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.9 | ScalarbladeCenterPartNumber | read-only | mandatory | Machine chassis part number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.10 | ScalarbladeCenterFruSerial | read-only | mandatory | Machine chassis FRU serial number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.11 | ScalarbladeCenterManufacturingIDNumber | read-only | mandatory | Machine chassis manufacturer ID Number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.12 | ScalarbladeCenterProductId | read-only | mandatory | Machine chassis product ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.13 | ScalarbladeCenterSubManufacturerId | read-only | mandatory | Machine chassis subsystem manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.14 | ScalarbladeCenterClei | read-only | mandatory | Machine chassis Common Language Equipment Identification (CLEI). |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.15 | ScalarbladeCenterDirectSerialAttach | read-only | mandatory | Presence of the Direct Serial Attach Module. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.1.1.16 | ScalarbladeCenterHardwareRevisionString | read-only | mandatory | Machine chassis hardware revision in string format. If a hardware revision is programmed in the OEM VPD area for this component, then this MIB object should be… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2 | NodemmHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1 | TablemmHardwareVpdTable | not-accessible | mandatory | Table of the management module hardware components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1 | RowmmHardwareVpdEntry | not-accessible | mandatory | Management module hardware VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.1 | ColumnmmHardwareVpdIndex | read-only | mandatory | Management module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.2 | ColumnmmHardwareVpdBayNumber | read-only | mandatory | Management module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.3 | ColumnmmHardwareVpdManufacturingId | read-only | mandatory | Management module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.4 | ColumnmmHardwareVpdFruNumber | read-only | mandatory | Management module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.5 | ColumnmmHardwareVpdHardwareRevision | read-only | mandatory | Management module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed i… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.6 | ColumnmmHardwareVpdUuid | read-only | mandatory | Management module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.7 | ColumnmmHardwareVpdManufDate | read-only | mandatory | Management module hardware VPD manufacture date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.8 | ColumnmmHardwareVpdPartNumber | read-only | mandatory | Management module hardware VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.9 | ColumnmmHardwareVpdFruSerial | read-only | mandatory | Management module hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.10 | ColumnmmHardwareVpdManufacturingIDNumber | read-only | mandatory | Management module hardware VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.11 | ColumnmmHardwareVpdProductId | read-only | mandatory | Management module hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.12 | ColumnmmHardwareVpdSubManufacturerId | read-only | mandatory | Management module hardware VPD subsystem manufacturer. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.13 | ColumnmmHardwareVpdClei | read-only | mandatory | Management module hardware VPD Common Language Equipment Identification (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.1.1.14 | ColumnmmHardwareVpdHardwareRevisionString | read-only | mandatory | Management module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revisio… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2 | TablemmInpHardwareVpdTable | not-accessible | mandatory | Table of the management module interposer hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1 | RowmmInpHardwareVpdEntry | not-accessible | mandatory | Management module Interposer hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.1 | ColumnmmInpHardwareVpdIndex | read-only | mandatory | Management module Interposer hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.2 | ColumnmmInpHardwareVpdBayNumber | read-only | mandatory | Management module Interposer hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blade… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.3 | ColumnmmInpHardwareVpdManufacturingId | read-only | mandatory | Management module Interposer hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.4 | ColumnmmInpHardwareVpdFruNumber | read-only | mandatory | Management module Interposer hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blade… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.5 | ColumnmmInpHardwareVpdHardwareRevision | read-only | mandatory | Management module Interposer hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is fo… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.6 | ColumnmmInpHardwareVpdUuid | read-only | mandatory | Management module Interposer hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.7 | ColumnmmInpHardwareVpdManufDate | read-only | mandatory | Management module Interposer hardware VPD manufacture date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.8 | ColumnmmInpHardwareVpdPartNumber | read-only | mandatory | Management module Interposer hardware VPD Part number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blad… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.9 | ColumnmmInpHardwareVpdFruSerial | read-only | mandatory | Management module Interposer hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is fo… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.10 | ColumnmmInpHardwareVpdManufacturingIDNumber | read-only | mandatory | Management module Interposer hardware VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.11 | ColumnmmInpHardwareVpdProductId | read-only | mandatory | Management module Interposer hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.12 | ColumnmmInpHardwareVpdSubManufacturerId | read-only | mandatory | Management module Interposer hardware VPD subsystem manufacturer. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.13 | ColumnmmInpHardwareVpdClei | read-only | mandatory | Management module Interposer hardware VPD Common Language Equipment Identification (CLEI). For consistent results, view as a table and not as individual entrie… |
| 1.3.6.1.4.1.2.3.51.2.2.21.2.2.1.14 | ColumnmmInpHardwareVpdHardwareRevisionString | read-only | mandatory | Management module Interposer hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This… |
| 1.3.6.1.4.1.2.3.51.2.2.21.3 | NodemmFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1 | TablemmMainApplVpdTable | not-accessible | mandatory | Table of MM Firmware VPD. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1 | RowmmMainApplVpdEntry | not-accessible | mandatory | MM Firmware VPD entry. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.1 | ColumnmmMainApplVpdIndex | read-only | mandatory | Firmware VPD index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.2 | ColumnmmMainApplVpdName | read-only | mandatory | Firmware VPD name description. 'AMM firmware' indicates the running firmware of the MM. 'AMM firmware (pending restart)' indicates the flashed firmware of the … |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.3 | ColumnmmMainApplVpdBuildId | read-only | mandatory | Firmware VPD build identification. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.4 | ColumnmmMainApplVpdRevisonNumber | read-only | mandatory | Firmware VPD revision number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.5 | ColumnmmMainApplVpdFilename | read-only | mandatory | Firmware VPD file name. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.1.1.6 | ColumnmmMainApplVpdBuildDate | read-only | mandatory | Firmware VPD build date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2 | TablemmBootROMVpdTable | not-accessible | deprecated | Table of MM Firmware VPD. NOTE: This MIB object is for MM only. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1 | RowmmBootROMVpdEntry | not-accessible | deprecated | MM Firmware VPD entry. NOTE: This MIB object is for MM only. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.1 | ColumnmmBootROMVpdIndex | read-only | deprecated | Firmware VPD index. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.2 | ColumnmmBootROMVpdName | read-only | deprecated | Firmware VPD name description. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.3 | ColumnmmBootROMVpdBuildId | read-only | deprecated | Firmware VPD build identification. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.4 | ColumnmmBootROMVpdRevisonNumber | read-only | deprecated | Firmware VPD revision number. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.5 | ColumnmmBootROMVpdFilename | read-only | deprecated | Firmware VPD file name. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.2.1.6 | ColumnmmBootROMVpdBuildDate | read-only | deprecated | Firmware VPD build date. NOTE: This MIB object is for MM only. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3 | TablemmRemoteControlVpdTable | not-accessible | deprecated | Table of MM Firmware VPD. NOTE: This MIB object is for MM only. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1 | RowmmRemoteControlVpdEntry | not-accessible | deprecated | MM Firmware VPD entry. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.1 | ColumnmmRemoteControlVpdIndex | read-only | deprecated | Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.2 | ColumnmmRemoteControlVpdName | read-only | deprecated | Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.3 | ColumnmmRemoteControlVpdBuildId | read-only | deprecated | Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.4 | ColumnmmRemoteControlVpdRevisonNumber | read-only | deprecated | Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.5 | ColumnmmRemoteControlVpdFilename | read-only | deprecated | Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.3.1.6 | ColumnmmRemoteControlVpdBuildDate | read-only | deprecated | Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4 | TablemmPS2toUSBConvVpdTable | not-accessible | deprecated | Table of MM Firmware VPD. NOTE: This MIB object is for MM only. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1 | RowmmPS2toUSBConvVpdEntry | not-accessible | deprecated | MM Firmware VPD entry. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.1 | ColumnmmPS2toUSBConvVpdIndex | read-only | deprecated | Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.2 | ColumnmmPS2toUSBConvVpdName | read-only | deprecated | Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.3 | ColumnmmPS2toUSBConvVpdBuildId | read-only | deprecated | Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.4 | ColumnmmPS2toUSBConvVpdRevisonNumber | read-only | deprecated | Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.5 | ColumnmmPS2toUSBConvVpdFilename | read-only | deprecated | Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.4.1.6 | ColumnmmPS2toUSBConvVpdBuildDate | read-only | deprecated | Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5 | TablemmToUSBIntfVpdTable | not-accessible | deprecated | Table of MM Firmware VPD. NOTE: This MIB object is for MM only. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1 | RowmmToUSBIntfVpdEntry | not-accessible | deprecated | MM Firmware VPD entry. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.1 | ColumnmmToUSBIntfVpdIndex | read-only | deprecated | Firmware VPD index. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.2 | ColumnmmToUSBIntfVpdName | read-only | deprecated | Firmware VPD name description. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.3 | ColumnmmToUSBIntfVpdBuildId | read-only | deprecated | Firmware VPD build identification. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.4 | ColumnmmToUSBIntfVpdRevisonNumber | read-only | deprecated | Firmware VPD revision number. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.5 | ColumnmmToUSBIntfVpdFilename | read-only | deprecated | Firmware VPD file name. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.3.5.1.6 | ColumnmmToUSBIntfVpdBuildDate | read-only | deprecated | Firmware VPD build date. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4 | NodebladeHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1 | TablebladeHardwareVpdTable | not-accessible | mandatory | Table of VPD information for the blade hardware components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1 | RowbladeHardwareVpdEntry | not-accessible | mandatory | Blade hardware VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.1 | ColumnbladeHardwareVpdIndex | read-only | mandatory | Blade hardware VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.2 | ColumnbladeHardwareVpdBayNumber | read-only | mandatory | Blade hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.3 | ColumnbladeHardwareVpdManufacturingId | read-only | mandatory | Blade hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.4 | ColumnbladeHardwareVpdFruNumber | read-only | mandatory | Blade hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.5 | ColumnbladeHardwareVpdHardwareRevision | read-only | mandatory | Blade hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM VP… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.6 | ColumnbladeHardwareVpdSerialNumber | read-only | mandatory | Blade hardware VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.7 | ColumnbladeHardwareVpdMachineType | read-only | mandatory | Blade hardware VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.8 | ColumnbladeHardwareVpdUuid | read-only | mandatory | Blade hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.9 | ColumnbladeHardwareVpdManufDate | read-only | mandatory | Blade hardware VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.10 | ColumnbladeHardwareVpdPartNumber | read-only | mandatory | Blade hardware VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.11 | ColumnbladeHardwareVpdFruSerial | read-only | mandatory | Blade hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.12 | ColumnbladeHardwareVpdMachineModel | read-only | mandatory | Blade hardware VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.13 | ColumnbladeHardwareVpdManufacturingIDNumber | read-only | mandatory | Blade hardware VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.14 | ColumnbladeHardwareVpdProductId | read-only | mandatory | Blade hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.15 | ColumnbladeHardwareVpdSubManufacturerId | read-only | mandatory | Blade hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.16 | ColumnbladeHardwareVpdClei | read-only | mandatory | Blade hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.17 | ColumnbladeHardwareVpdHardwareRevisionString | read-only | mandatory | Blade hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is program… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.20 | ColumnbladeDaughterVpdCardType | read-only | mandatory | Blade expansion card (daughter card) VPD type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.21 | ColumnbladeDaughterVpdManufacturingId | read-only | mandatory | Blade expansion card (daughter card) VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.22 | ColumnbladeDaughterVpdFruNumber | read-only | mandatory | Blade expansion card (daughter card) VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.23 | ColumnbladeDaughterVpdHardwareRevision | read-only | mandatory | Blade expansion card (daughter card) VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is pr… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.24 | ColumnbladeDaughterVpdSerialNumber | read-only | mandatory | Blade expansion card (daughter card) VPD Serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.25 | ColumnbladeDaughterVpdMachineType | read-only | mandatory | Blade expansion card (daughter card) VPD Machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.26 | ColumnbladeDaughterVpdUuid | read-only | mandatory | Blade expansion card (daughter card) VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.27 | ColumnbladeDaughterVpdManufDate | read-only | mandatory | Blade expansion card (daughter card) VPD Manufacture date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.28 | ColumnbladeDaughterVpdPartNumber | read-only | mandatory | Blade expansion card (daughter card) VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.29 | ColumnbladeDaughterVpdFruSerial | read-only | mandatory | Blade expansion card (daughter card) VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.30 | ColumnbladeDaughterVpdManufacturingIDNumber | read-only | mandatory | Blade expansion card (daughter card) VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.31 | ColumnbladeDaughterVpdProductId | read-only | mandatory | Blade expansion card (daughter card) VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.32 | ColumnbladeDaughterVpdSubManufacturerId | read-only | mandatory | Blade expansion card (daughter card) VPD subsystem manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.33 | ColumnbladeDaughterVpdClei | read-only | mandatory | Blade expansion card (daughter card) VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.1.1.34 | ColumnbladeDaughterVpdHardwareRevisionString | read-only | mandatory | Blade expansion card (daughter card) VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardwa… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2 | TablebladeMACAddressVpdTable | not-accessible | mandatory | Table of MAC addresses of the blade and its expansion cards (daughter cards). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1 | RowbladeMACAddressVpdEntry | not-accessible | mandatory | Blade MAC address entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.1 | ColumnbladeMACAddressVpdIndex | read-only | mandatory | Blade index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.2 | ColumnbladeMACAddress1Vpd | read-only | mandatory | Blade MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.3 | ColumnbladeMACAddress2Vpd | read-only | mandatory | Blade MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.4 | ColumnbladeMACAddress3Vpd | read-only | mandatory | Blade MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.5 | ColumnbladeMACAddress4Vpd | read-only | mandatory | Blade MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.6 | ColumnbladeMACAddress5Vpd | read-only | mandatory | Blade MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.7 | ColumnbladeMACAddress6Vpd | read-only | mandatory | Blade MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.8 | ColumnbladeMACAddress7Vpd | read-only | mandatory | Blade MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.9 | ColumnbladeMACAddress8Vpd | read-only | mandatory | Blade MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.10 | ColumnbladeDaughterCard1MACAddress1Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.11 | ColumnbladeDaughterCard1MACAddress2Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.12 | ColumnbladeDaughterCard1MACAddress3Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.13 | ColumnbladeDaughterCard1MACAddress4Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.14 | ColumnbladeDaughterCard1MACAddress5Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.15 | ColumnbladeDaughterCard1MACAddress6Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.16 | ColumnbladeDaughterCard1MACAddress7Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.17 | ColumnbladeDaughterCard1MACAddress8Vpd | read-only | mandatory | Blade expansion card (daughter card) 1 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.18 | ColumnbladeDaughterCard2MACAddress1Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.19 | ColumnbladeDaughterCard2MACAddress2Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.20 | ColumnbladeDaughterCard2MACAddress3Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.21 | ColumnbladeDaughterCard2MACAddress4Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.22 | ColumnbladeDaughterCard2MACAddress5Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.23 | ColumnbladeDaughterCard2MACAddress6Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.24 | ColumnbladeDaughterCard2MACAddress7Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.25 | ColumnbladeDaughterCard2MACAddress8Vpd | read-only | mandatory | Blade expansion card (daughter card) 2 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.26 | ColumnbladeDaughterCard3MACAddress1Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.27 | ColumnbladeDaughterCard3MACAddress2Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.28 | ColumnbladeDaughterCard3MACAddress3Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.29 | ColumnbladeDaughterCard3MACAddress4Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.30 | ColumnbladeDaughterCard3MACAddress5Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.31 | ColumnbladeDaughterCard3MACAddress6Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.32 | ColumnbladeDaughterCard3MACAddress7Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.33 | ColumnbladeDaughterCard3MACAddress8Vpd | read-only | mandatory | Blade expansion card (daughter card) 3 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.34 | ColumnbladeDaughterCard4MACAddress1Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.35 | ColumnbladeDaughterCard4MACAddress2Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.36 | ColumnbladeDaughterCard4MACAddress3Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.37 | ColumnbladeDaughterCard4MACAddress4Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.38 | ColumnbladeDaughterCard4MACAddress5Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.39 | ColumnbladeDaughterCard4MACAddress6Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.40 | ColumnbladeDaughterCard4MACAddress7Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.41 | ColumnbladeDaughterCard4MACAddress8Vpd | read-only | mandatory | Blade expansion card (daughter card) 4 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.42 | ColumnbladeDaughterCard5MACAddress1Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.43 | ColumnbladeDaughterCard5MACAddress2Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.44 | ColumnbladeDaughterCard5MACAddress3Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.45 | ColumnbladeDaughterCard5MACAddress4Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.46 | ColumnbladeDaughterCard5MACAddress5Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.47 | ColumnbladeDaughterCard5MACAddress6Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.48 | ColumnbladeDaughterCard5MACAddress7Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.49 | ColumnbladeDaughterCard5MACAddress8Vpd | read-only | mandatory | Blade expansion card (daughter card) 5 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.100 | ColumnbladeHSDaughterCard1MACAddress1Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.101 | ColumnbladeHSDaughterCard1MACAddress2Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.102 | ColumnbladeHSDaughterCard1MACAddress3Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.103 | ColumnbladeHSDaughterCard1MACAddress4Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.104 | ColumnbladeHSDaughterCard1MACAddress5Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.105 | ColumnbladeHSDaughterCard1MACAddress6Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.106 | ColumnbladeHSDaughterCard1MACAddress7Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.107 | ColumnbladeHSDaughterCard1MACAddress8Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.108 | ColumnbladeHSDaughterCard1MACAddress9Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 9. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.109 | ColumnbladeHSDaughterCard1MACAddress10Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 10. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.110 | ColumnbladeHSDaughterCard1MACAddress11Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 11. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.111 | ColumnbladeHSDaughterCard1MACAddress12Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 12. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.112 | ColumnbladeHSDaughterCard1MACAddress13Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 13. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.113 | ColumnbladeHSDaughterCard1MACAddress14Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 14. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.114 | ColumnbladeHSDaughterCard1MACAddress15Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 15. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.115 | ColumnbladeHSDaughterCard1MACAddress16Vpd | read-only | mandatory | Blade high speed expansion card (daughter card) 1 MAC address 16. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.164 | ColumnbladeSideCardMACAddress1Vpd | read-only | mandatory | Blade side card MAC address 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.165 | ColumnbladeSideCardMACAddress2Vpd | read-only | mandatory | Blade side card MAC address 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.166 | ColumnbladeSideCardMACAddress3Vpd | read-only | mandatory | Blade side card MAC address 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.167 | ColumnbladeSideCardMACAddress4Vpd | read-only | mandatory | Blade side card MAC address 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.168 | ColumnbladeSideCardMACAddress5Vpd | read-only | mandatory | Blade side card MAC address 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.169 | ColumnbladeSideCardMACAddress6Vpd | read-only | mandatory | Blade side card MAC address 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.170 | ColumnbladeSideCardMACAddress7Vpd | read-only | mandatory | Blade side card MAC address 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.2.1.171 | ColumnbladeSideCardMACAddress8Vpd | read-only | mandatory | Blade side card MAC address 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3 | TablebladeExpBoardVpdTable | not-accessible | mandatory | Table of VPD information for the blade expansion board components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1 | RowbladeExpBoardVpdEntry | not-accessible | mandatory | Blade expansion board VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.1 | ColumnbladeExpBoardVpdIndex | read-only | mandatory | Blade expansion board VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.2 | ColumnbladeExpBoardVpdBayNumber | read-only | mandatory | Blade expansion board VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.3 | ColumnbladeExpBoardVpdManufacturingId | read-only | mandatory | Blade expansion board VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.4 | ColumnbladeExpBoardVpdFruNumber | read-only | mandatory | Blade expansion board VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.5 | ColumnbladeExpBoardVpdHardwareRevision | read-only | mandatory | Blade expansion board VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.6 | ColumnbladeExpBoardVpdSerialNumber | read-only | mandatory | Blade expansion board VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.7 | ColumnbladeExpBoardVpdMachineType | read-only | mandatory | Blade expansion board VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.8 | ColumnbladeExpBoardVpdUuid | read-only | mandatory | Blade expansion board VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.9 | ColumnbladeExpBoardVpdManufDate | read-only | mandatory | Blade expansion board VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.10 | ColumnbladeExpBoardVpdPartNumber | read-only | mandatory | Blade expansion board VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.11 | ColumnbladeExpBoardVpdFruSerial | read-only | mandatory | Blade expansion board VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.12 | ColumnbladeExpBoardVpdMachineModel | read-only | mandatory | Blade expansion board VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.13 | ColumnbladeExpBoardVpdManufacturingIDNumber | read-only | mandatory | Blade expansion board VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.14 | ColumnbladeExpBoardVpdProductId | read-only | mandatory | Blade expansion board VPD Product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.15 | ColumnbladeExpBoardVpdSubManufacturerId | read-only | mandatory | Blade expansion board VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.16 | ColumnbladeExpBoardVpdClei | read-only | mandatory | Blade expansion board VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.19 | ColumnbladeExpBoardVpdBladeBayNumber | read-only | mandatory | Blade bay number of the blade expansion board. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.20 | ColumnbladeExpBoardVpdCardType | read-only | mandatory | Blade expansion board VPD type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.21 | ColumnbladeExpBoardVpdCardSubType | read-only | mandatory | Blade expansion board VPD subtype. Describes the expansion board type with more granularity. bse1,bse2,bse3 = Blade Storage Expansion (1st, 2nd, and 3rd Genera… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.3.1.22 | ColumnbladeExpBoardVpdHardwareRevisionString | read-only | mandatory | Blade expansion board VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4 | TablebladeSideCardVpdTable | not-accessible | mandatory | Table of VPD information for the blade side card components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1 | RowbladeSideCardVpdEntry | not-accessible | mandatory | Blade side card VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.1 | ColumnbladeSideCardVpdIndex | read-only | mandatory | Blade side card VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.2 | ColumnbladeSideCardVpdBayNumber | read-only | mandatory | Blade side card VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.3 | ColumnbladeSideCardVpdManufacturingId | read-only | mandatory | Blade side card VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.4 | ColumnbladeSideCardVpdFruNumber | read-only | mandatory | Blade side card VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.5 | ColumnbladeSideCardVpdHardwareRevision | read-only | mandatory | Blade side card VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM V… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.6 | ColumnbladeSideCardVpdSerialNumber | read-only | mandatory | Blade side card VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.7 | ColumnbladeSideCardVpdMachineType | read-only | mandatory | Blade side card VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.8 | ColumnbladeSideCardVpdUuid | read-only | mandatory | Blade side card VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.9 | ColumnbladeSideCardVpdManufDate | read-only | mandatory | Blade side card VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.10 | ColumnbladeSideCardVpdPartNumber | read-only | mandatory | Blade side card VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.11 | ColumnbladeSideCardVpdFruSerial | read-only | mandatory | Blade side card VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.12 | ColumnbladeSideCardVpdMachineModel | read-only | mandatory | Blade side card VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.13 | ColumnbladeSideCardVpdManufacturingIDNumber | read-only | mandatory | Blade side card VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.14 | ColumnbladeSideCardVpdProductId | read-only | mandatory | Blade side card VPD Product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.15 | ColumnbladeSideCardVpdSubManufacturerId | read-only | mandatory | Blade side card VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.16 | ColumnbladeSideCardVpdClei | read-only | mandatory | Blade side card VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.19 | ColumnbladeSideCardVpdBladeBayNumber | read-only | mandatory | Blade bay number of the blade side card. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.4.1.20 | ColumnbladeSideCardVpdHardwareRevisionString | read-only | mandatory | Blade side card VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is progra… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5 | TablebladeExpCardVpdTable | not-accessible | mandatory | Table of VPD information for the blade expansion card components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1 | RowbladeExpCardVpdEntry | not-accessible | mandatory | Blade expansion card VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.1 | ColumnbladeExpCardVpdIndex | read-only | mandatory | Blade expansion card VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.2 | ColumnbladeExpCardVpdBayNumber | read-only | mandatory | Blade expansion card VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.3 | ColumnbladeExpCardVpdManufacturingId | read-only | mandatory | Blade expansion card VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.4 | ColumnbladeExpCardVpdFruNumber | read-only | mandatory | Blade expansion card VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.5 | ColumnbladeExpCardVpdHardwareRevision | read-only | mandatory | Blade expansion card VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the … |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.6 | ColumnbladeExpCardVpdSerialNumber | read-only | mandatory | Blade expansion card VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.7 | ColumnbladeExpCardVpdMachineType | read-only | mandatory | Blade expansion card VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.8 | ColumnbladeExpCardVpdUuid | read-only | mandatory | Blade expansion card VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.9 | ColumnbladeExpCardVpdManufDate | read-only | mandatory | Blade expansion card VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.10 | ColumnbladeExpCardVpdPartNumber | read-only | mandatory | Blade expansion card VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.11 | ColumnbladeExpCardVpdFruSerial | read-only | mandatory | Blade expansion card VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.12 | ColumnbladeExpCardVpdMachineModel | read-only | mandatory | Blade expansion card VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.13 | ColumnbladeExpCardVpdManufacturingIDNumber | read-only | mandatory | Blade expansion card VPD Manufacturer ID Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.14 | ColumnbladeExpCardVpdProductId | read-only | mandatory | Blade expansion card VPD Product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.15 | ColumnbladeExpCardVpdSubManufacturerId | read-only | mandatory | Blade expansion card VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.16 | ColumnbladeExpCardVpdClei | read-only | mandatory | Blade expansion card VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.19 | ColumnbladeExpCardVpdBladeBayNumber | read-only | mandatory | Blade bay number of the blade expansion card. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.21 | ColumnbladeExpCardVpdCardTypeInfo | read-only | mandatory | Blade expansion card (daughter card) VPD type code that describes the expansion card. For consistent results, view as a table and not as individual entries. NO… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.22 | ColumnbladeExpCardVpdHighSpeed | read-only | mandatory | Blade expansion card (daughter card) VPD high speed that indicates whether the expansion card is high speed or not. For consistent results, view as a table and… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.5.1.23 | ColumnbladeExpCardVpdHardwareRevisionString | read-only | mandatory | Blade expansion card VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is p… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6 | TablebladecKVMCardVpdTable | not-accessible | mandatory | Table of VPD information for the blade concurrent keyboard, video, and mouse (cKVM) card components. For consistent results, view as a table and not as individ… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1 | RowbladecKVMCardVpdEntry | not-accessible | mandatory | Blade concurrent keyboard, video, and mouse (cKVM) card VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.1 | ColumnbladecKVMCardVpdIndex | read-only | mandatory | Blade concurrent keyboard mouse video (cKVM) card VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.2 | ColumnbladecKVMCardVpdBayNumber | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.3 | ColumnbladecKVMCardVpdManufacturingId | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.4 | ColumnbladecKVMCardVpdFruNumber | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.5 | ColumnbladecKVMCardVpdHardwareRevision | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware r… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.6 | ColumnbladecKVMCardVpdSerialNumber | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.7 | ColumnbladecKVMCardVpdMachineType | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.8 | ColumnbladecKVMCardVpdUuid | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.9 | ColumnbladecKVMCardVpdManufDate | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.10 | ColumnbladecKVMCardVpdPartNumber | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.11 | ColumnbladecKVMCardVpdFruSerial | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.12 | ColumnbladecKVMCardVpdMachineModel | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.13 | ColumnbladecKVMCardVpdManufacturingIDNumber | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.14 | ColumnbladecKVMCardVpdProductId | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD Product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.15 | ColumnbladecKVMCardVpdSubManufacturerId | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.16 | ColumnbladecKVMCardVpdClei | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individua… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.6.1.17 | ColumnbladecKVMCardVpdHardwareRevisionString | read-only | mandatory | Blade concurrent keyboard video mouse (cKVM) card VPD hardware revision in string format. For consistent results, view as a table and not as individual entries… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7 | TablebladeAndExpCardWwnGuidVpdTable | not-accessible | mandatory | Table of World Wide Names (WWN), Global Unique IDs (GUID) and Serial Attach SCSI IDs (SAS) of the blade server and its expansion cards (daughter cards). For co… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1 | RowbladeAndExpCardWwnGuidVpdEntry | not-accessible | mandatory | Blade WWN/GUID entries. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.1 | ColumnbladeAndExpCardWwnGuidVpdIndex | read-only | mandatory | Blade or expansion card index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.2 | ColumnbladeAndExpCardWwnGuidVpdBayNumber | read-only | mandatory | Blade or expansion card VPD bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.3 | ColumnbladeAndExpCardWwnGuidVpdName | read-only | mandatory | The name of the blade or expansion card. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.4 | ColumnbladeAndExpCardWwnGuidVpdBladeBayNumber | read-only | mandatory | For expansion cards, it's the blade bay number of the blade expansion card. For blades, it's the bay number of the blade. For consistent results, view as a tab… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.5 | ColumnbladeAndExpCardWwnGuidVpdType | read-only | mandatory | Blade or expansion card WWN/GUID/SAS Type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.6 | ColumnbladeAndExpCardWwnGuidVpd1 | read-only | mandatory | Blade or expansion card WWN/GUID 1. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.7 | ColumnbladeAndExpCardWwnGuidVpd2 | read-only | mandatory | Blade or expansion card WWN/GUID 2. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.8 | ColumnbladeAndExpCardWwnGuidVpd3 | read-only | mandatory | Blade or expansion card WWN/GUID 3. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.9 | ColumnbladeAndExpCardWwnGuidVpd4 | read-only | mandatory | Blade or expansion card WWN/GUID 4. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.10 | ColumnbladeAndExpCardWwnGuidVpd5 | read-only | mandatory | Blade or expansion card WWN/GUID 5. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.11 | ColumnbladeAndExpCardWwnGuidVpd6 | read-only | mandatory | Blade or expansion card WWN/GUID 6. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.12 | ColumnbladeAndExpCardWwnGuidVpd7 | read-only | mandatory | Blade or expansion card WWN/GUID 7. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.7.1.13 | ColumnbladeAndExpCardWwnGuidVpd8 | read-only | mandatory | Blade or expansion card WWN/GUID 8. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8 | TablebladeManagementCardVpdTable | not-accessible | mandatory | Table of VPD information for the blade management card component. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1 | RowbladeManagementCardVpdEntry | not-accessible | mandatory | Blade management card VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.1 | ColumnbladeManagementCardVpdIndex | read-only | mandatory | Blade management card VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.2 | ColumnbladeManagementCardVpdBayNumber | read-only | mandatory | Blade management card VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.3 | ColumnbladeManagementCardVpdManufacturingId | read-only | mandatory | Blade management card VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.4 | ColumnbladeManagementCardVpdFruNumber | read-only | mandatory | Blade management card VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.5 | ColumnbladeManagementCardVpdHardwareRevision | read-only | mandatory | Blade management card VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.6 | ColumnbladeManagementCardVpdSerialNumber | read-only | mandatory | Blade management card VPD serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.7 | ColumnbladeManagementCardVpdMachineType | read-only | mandatory | Blade management card VPD machine type. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.8 | ColumnbladeManagementCardVpdUuid | read-only | mandatory | Blade management card VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.9 | ColumnbladeManagementCardVpdManufDate | read-only | mandatory | Blade management card VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.10 | ColumnbladeManagementCardVpdPartNumber | read-only | mandatory | Blade management card VPD Part number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.11 | ColumnbladeManagementCardVpdFruSerial | read-only | mandatory | Blade management card VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.12 | ColumnbladeManagementCardVpdMachineModel | read-only | mandatory | Blade management card VPD machine model. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.13 | ColumnbladeManagementCardVpdManufacturingIDNumber | read-only | mandatory | Blade management card VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.14 | ColumnbladeManagementCardVpdProductId | read-only | mandatory | Blade management card VPD Product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.15 | ColumnbladeManagementCardVpdSubManufacturerId | read-only | mandatory | Blade management card VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.16 | ColumnbladeManagementCardVpdClei | read-only | mandatory | Blade management card VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.4.8.1.17 | ColumnbladeManagementCardVpdHardwareRevisionString | read-only | mandatory | Blade management card VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.5 | NodebladeFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1 | TablebladeBiosVPDTable | not-accessible | mandatory | Table of blade firmware vital product data (VPD) information. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1 | RowbladeBiosVPDEntry | not-accessible | mandatory | Blade firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.1 | ColumnbladeBiosVpdIndex | read-only | mandatory | Blade firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.2 | ColumnbladeBiosVpdId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.3 | ColumnbladeBiosVpdExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.4 | ColumnbladeBiosVpdPowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.5 | ColumnbladeBiosVpdName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.6 | ColumnbladeBiosVpdBuildId | read-only | mandatory | The build ID for the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.7 | ColumnbladeBiosVpdRevision | read-only | mandatory | The revision of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.8 | ColumnbladeBiosVpdDate | read-only | mandatory | The date of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.1.1.9 | ColumnbladeBiosVpdLevelStatus | read-only | mandatory | The level status of the blade bios firmware build ID. It has three possible values as Different (mismatch firmware build ID), Match (the same firmware build ID… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2 | TablebladeDiagsVPDTable | not-accessible | mandatory | Table of blade firmware vital product data (VPD) information. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1 | RowbladeDiagsVPDEntry | not-accessible | mandatory | Blade firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.1 | ColumnbladeDiagsVpdIndex | read-only | mandatory | Blade firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.2 | ColumnbladeDiagsVpdId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.3 | ColumnbladeDiagsVpdExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.4 | ColumnbladeDiagsVpdPowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.5 | ColumnbladeDiagsVpdName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.6 | ColumnbladeDiagsVpdBuildId | read-only | mandatory | The build ID for the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.7 | ColumnbladeDiagsVpdRevision | read-only | mandatory | The revision of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.8 | ColumnbladeDiagsVpdDate | read-only | mandatory | The date of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.2.1.9 | ColumnbladeDiagsVpdLevelStatus | read-only | mandatory | The level status of the blade diagnostics firmware build ID. It has three possible values as Different (mismatch firmware build ID), Match (the same firmware b… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3 | TablebladeSysMgmtProcVPDTable | not-accessible | mandatory | Table of blade firmware vital product data (VPD) information. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1 | RowbladeSysMgmtProcVPDEntry | not-accessible | mandatory | Blade firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.1 | ColumnbladeSysMgmtProcVpdIndex | read-only | mandatory | Blade firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.2 | ColumnbladeSysMgmtProcVpdId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.3 | ColumnbladeSysMgmtProcVpdExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.4 | ColumnbladeSysMgmtProcVpdPowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.5 | ColumnbladeSysMgmtProcVpdName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.6 | ColumnbladeSysMgmtProcVpdBuildId | read-only | mandatory | The build ID for the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.7 | ColumnbladeSysMgmtProcVpdRevision | read-only | mandatory | The revision of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.3.1.8 | ColumnbladeSysMgmtProcVpdLevelStatus | read-only | mandatory | The level status of the blade system management processor firmware build ID. It has three possible values as Different (mismatch firmware build ID), Match (the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4 | TablebladecKVMVPDTable | not-accessible | mandatory | Table of blade firmware vital product data (VPD) information. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1 | RowbladecKVMVPDEntry | not-accessible | mandatory | Blade firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.1 | ColumnbladecKVMVpdIndex | read-only | mandatory | Blade firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.2 | ColumnbladecKVMVpdId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.3 | ColumnbladecKVMVpdExists | read-only | mandatory | Indicates whether the blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.4 | ColumnbladecKVMVpdPowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.5 | ColumnbladecKVMVpdName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.4.1.7 | ColumnbladecKVMVpdRevision | read-only | mandatory | The revision of the blade firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5 | NodebladeFWBuildIDs | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1 | TablebladeFWBuildIDTable | not-accessible | mandatory | Table of Blade Firmware Build ID entries information. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1 | RowbladeFWBuildIDEntry | not-accessible | mandatory | Blade Firmware Build ID table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.1 | ColumnbladeFWBuildIDIndex | read-only | mandatory | The index number of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.2 | ColumnbladeFWBuildMfg | read-write | mandatory | The Manufacturer property of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.3 | ColumnbladeFWBuildMT | read-write | mandatory | The Machine Type property of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.4 | ColumnbladeFWBuildFWType | read-write | mandatory | The Firmware Type property of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.5 | ColumnbladeFWBuildID | read-write | mandatory | The Build ID property of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.1.1.6 | ColumnbladeFWBuildRev | read-write | mandatory | The Build Revision property of one Build ID entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.2 | ScalarcreateBladeFWBuildIDs | write-only | mandatory | Create one new Build ID List from current installed blades. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3 | NodeaddBladeFWBuildID | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.1 | ScalaraddBladeMfg | read-write | mandatory | Add one Build ID entry into the Build ID List. This is to set Manufacturer property. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.2 | ScalaraddBladeMt | read-write | mandatory | Add one Build ID entry into the Build ID List. This is to set Machine Type property. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.3 | ScalaraddBladeFt | read-write | mandatory | Add one Build ID entry into the Build ID List. This is to set Firmware Type property. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.4 | ScalaraddBladeBuildID | read-write | mandatory | Add one Build ID entry into the Build ID List. This is to set Build ID property. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.5 | ScalaraddBladeBuildRev | read-write | mandatory | Add one Build ID entry into the Build ID List. This is to set Build Revision property. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.3.6 | ScalarexeBladeAdding | write-only | mandatory | Add one Build ID entry into the Build ID List. This is to perform the adding action. NOTE: Value returned for the GET command is meaningless for this MIB objec… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.4 | ScalarrmBladeFWBuildID | write-only | mandatory | Remove one Build ID entry from the Build ID List. The index of the Build ID entry in the list is required. NOTE: Value returned for the GET command is meaningl… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.5 | ScalarrmAllBladeFWBuildIDs | write-only | mandatory | Remove all Build ID entries from the Build ID List. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.6 | ScalarbuildIDFileName | read-write | mandatory | File name of the Build ID list that will be used in import function. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.7 | ScalarbuildIDURIName | read-write | mandatory | Contains the fully qualified remote location of the build ID list. Use buildIDFileName to specify the filename. A fully qualified remote location contains a su… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.8 | ScalarbuildIDtftpIP | read-write | mandatory | If importing/exporting via the legacy method using a tftp server, then set the IP address or host name of the TFTP server where the firmware file resides. The … |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.9 | ScalarimportBladeFWBuildIDs | write-only | mandatory | Import one Build ID List set by the buildIDFilename from a specific location set by buildIDServer. |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.10 | ScalarexportBladeFWBuildIDs | write-only | mandatory | Export the current Build ID List from the active AMM to a specific location set by buildIDServer. NOTE: Value returned for the GET command is meaningless for t… |
| 1.3.6.1.4.1.2.3.51.2.2.21.5.5.11 | ScalarstatusBladeFWBuildIDs | read-only | mandatory | Gives the status message from the last import or export operation. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6 | NodesmHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1 | TablesmHardwareVpdTable | not-accessible | mandatory | Table of the switch module hardware components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1 | RowsmHardwareVpdEntry | not-accessible | mandatory | Switch module hardware VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.1 | ColumnsmHardwareVpdIndex | read-only | mandatory | Switch module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.2 | ColumnsmHardwareVpdBayNumber | read-only | mandatory | Switch module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.3 | ColumnsmHardwareVpdManufacturingId | read-only | mandatory | Switch module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.4 | ColumnsmHardwareVpdFruNumber | read-only | mandatory | Switch module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.5 | ColumnsmHardwareVpdHardwareRevision | read-only | mandatory | Switch module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in th… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.8 | ColumnsmHardwareVpdUuid | read-only | mandatory | Switch module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.9 | ColumnsmHardwareVpdManufDate | read-only | mandatory | Switch module hardware VPD manufacture date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.10 | ColumnsmHardwareVpdPartNumber | read-only | mandatory | Switch module hardware VPD Part Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.11 | ColumnsmHardwareVpdFruSerial | read-only | mandatory | Switch module hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.12 | ColumnsmHardwareVpdManufacturingIDNumber | read-only | mandatory | Switch module hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.13 | ColumnsmHardwareVpdProductId | read-only | mandatory | Switch module hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.14 | ColumnsmHardwareVpdSubManufacturerId | read-only | mandatory | Switch module hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.15 | ColumnsmHardwareVpdClei | read-only | mandatory | Switch module hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.16 | ColumnsmHardwareVpdWwnGuid | read-only | mandatory | Switch module hardware VPD World Wide Name or Global Unique ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.17 | ColumnsmHardwareVpdWwnGuidType | read-only | mandatory | The WWN/GUID/SAS entry is actually World Wide Name, Global Unique ID or Serial Attach SCSI ID. For consistent results, view as a table and not as individual en… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.18 | ColumnsmHardwareVpdWidth | read-only | mandatory | The width of the switch module hardware. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.1.1.20 | ColumnsmHardwareVpdHardwareRevisionString | read-only | mandatory | Switch module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2 | TablesmInpHardwareVpdTable | not-accessible | mandatory | Table of the switch interposer hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCe… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1 | RowsmInpHardwareVpdEntry | not-accessible | mandatory | Switch Interposer hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.1 | ColumnsmInpHardwareVpdIndex | read-only | mandatory | Switch Interposer hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.2 | ColumnsmInpHardwareVpdBayNumber | read-only | mandatory | Switch Interposer hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS o… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.3 | ColumnsmInpHardwareVpdManufacturingId | read-only | mandatory | Switch Interposer hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.4 | ColumnsmInpHardwareVpdFruNumber | read-only | mandatory | Switch Interposer hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS o… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.5 | ColumnsmInpHardwareVpdHardwareRevision | read-only | mandatory | Switch Interposer hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.8 | ColumnsmInpHardwareVpdUuid | read-only | mandatory | Switch Interposer hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.9 | ColumnsmInpHardwareVpdManufDate | read-only | mandatory | Switch Interposer hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.10 | ColumnsmInpHardwareVpdPartNumber | read-only | mandatory | Switch Interposer hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS … |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.11 | ColumnsmInpHardwareVpdFruSerial | read-only | mandatory | Switch Interposer module hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.12 | ColumnsmInpHardwareVpdManufacturingIDNumber | read-only | mandatory | Switch Interposer module hardware VPD manufacturer ID Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is f… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.13 | ColumnsmInpHardwareVpdProductId | read-only | mandatory | Switch Interposer module hardware VPD product ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.14 | ColumnsmInpHardwareVpdSubManufacturerId | read-only | mandatory | Switch Interposer module hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object i… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.15 | ColumnsmInpHardwareVpdClei | read-only | mandatory | Switch Interposer module hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. NOTE:… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.16 | ColumnsmInpHardwareVpdWwnGuid | read-only | mandatory | Switch Interposer module hardware VPD World Wide Name or Global Unique ID. For consistent results, view as a table and not as individual entries. NOTE: This MI… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.17 | ColumnsmInpHardwareVpdWwnGuidType | read-only | mandatory | The Switch Interposer WWN/GUID/SAS entry is actually World Wide Name, Global Unique ID or Serial Attach SCSI ID. For consistent results, view as a table and no… |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.18 | ColumnsmInpHardwareVpdWidth | read-only | mandatory | The width of the switch Interposer module hardware. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.19 | ColumnsmInpHardwareVpdName | read-only | mandatory | The Switch Interposer Name. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.6.2.1.20 | ColumnsmInpHardwareVpdHardwareRevisionString | read-only | mandatory | Switch Interposer hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This MIB object… |
| 1.3.6.1.4.1.2.3.51.2.2.21.7 | NodesmFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1 | TablesmMainAppVpdTable | not-accessible | mandatory | Switch module main application VPD information table. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1 | RowsmMainAppVpdEntry | not-accessible | mandatory | Switch module main application VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.1 | ColumnsmMainAppVpdIndex | read-only | mandatory | Switch module main application VPD entry index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.2 | ColumnsmMainAppVpdId | read-only | mandatory | The switch module numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.3 | ColumnsmMainAppVpdExists | read-only | mandatory | Indicates whether the switch module specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.4 | ColumnsmMainAppVpdSwitchType | read-only | mandatory | Indicates the type of switch module installed. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.5 | ColumnsmMainApp1VpdBuildId | read-only | mandatory | Switch module firmware build id. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.6 | ColumnsmMainApp1VpdBuildDate | read-only | mandatory | Switch module firmware build date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.7 | ColumnsmMainApp1VpdRevisionNumber | read-only | mandatory | Switch module firmware revision number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.8 | ColumnsmMainApp2VpdBuildId | read-only | mandatory | Switch module firmware build id. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.9 | ColumnsmMainApp2VpdBuildDate | read-only | mandatory | Switch module firmware build date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.10 | ColumnsmMainApp2VpdRevisionNumber | read-only | mandatory | Switch module firmware revision number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.11 | ColumnsmMainApp3VpdBuildId | read-only | mandatory | I/O Module firmware build id. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.12 | ColumnsmMainApp3VpdBuildDate | read-only | mandatory | I/O Module firmware build date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.13 | ColumnsmMainApp3VpdRevisionNumber | read-only | mandatory | I/O Module firmware revision number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.1.1.20 | ColumnsmMainAppVpdSwitchSubType | read-only | mandatory | Indicates the subtype of switch module installed. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2 | TablesmBootRomVpdTable | not-accessible | mandatory | Switch module boot ROM VPD information table. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1 | RowsmBootRomVpdEntry | not-accessible | mandatory | Switch module boot ROM VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.1 | ColumnsmBootRomVpdIndex | read-only | mandatory | Switch module boot ROM VPD entry index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.2 | ColumnsmBootRomVpdId | read-only | mandatory | The switch module numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.3 | ColumnsmBootRomVpdExists | read-only | mandatory | Indicates whether the switch module specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.4 | ColumnsmBootRomVpdSwitchType | read-only | mandatory | Indicates the type of switch module installed. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.5 | ColumnsmBootRomVpdBuildId | read-only | mandatory | Switch module firmware build ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.6 | ColumnsmBootRomVpdBuildDate | read-only | mandatory | Switch module firmware build date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.7 | ColumnsmBootRomVpdRevisionNumber | read-only | mandatory | Switch module firmware revision number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.7.2.1.8 | ColumnsmBootRomVpdSwitchSubType | read-only | mandatory | Indicates the subtype of switch module installed. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8 | NodepmHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1 | TablepmHardwareVpdTable | not-accessible | mandatory | Table of the power module hardware components. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1 | RowpmHardwareVpdEntry | not-accessible | mandatory | Power module hardware VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.1 | ColumnpmHardwareVpdIndex | read-only | mandatory | Power module hardware VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.2 | ColumnpmHardwareVpdBayNumber | read-only | mandatory | Power module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.3 | ColumnpmHardwareVpdManufacturingId | read-only | mandatory | Power module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.4 | ColumnpmHardwareVpdFruNumber | read-only | mandatory | Power module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.5 | ColumnpmHardwareVpdHardwareRevision | read-only | mandatory | Power module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.8 | ColumnpmHardwareVpdUuid | read-only | mandatory | Power module hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.9 | ColumnpmHardwareVpdManufDate | read-only | mandatory | Power module hardware VPD Manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.10 | ColumnpmHardwareVpdPartNumber | read-only | mandatory | Power module hardware VPD Part Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.11 | ColumnpmHardwareVpdFruSerial | read-only | mandatory | Power module hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.12 | ColumnpmHardwareVpdManufacturingIDNumber | read-only | mandatory | Power module hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.13 | ColumnpmHardwareVpdProductId | read-only | mandatory | Power module hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.14 | ColumnpmHardwareVpdSubManufacturerId | read-only | mandatory | Power module hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.15 | ColumnpmHardwareVpdClei | read-only | mandatory | Power module hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.8.1.1.16 | ColumnpmHardwareVpdHardwareRevisionString | read-only | mandatory | Power module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.9 | NodemtHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.9.3 | ScalarmtHardwareVpdManufacturingId | read-only | mandatory | Media tray 1 hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.4 | ScalarmtHardwareVpdFruNumber | read-only | mandatory | Media tray 1 hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.5 | ScalarmtHardwareVpdHardwareRevision | read-only | mandatory | Media tray 1 hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.8 | ScalarmtHardwareVpdUuid | read-only | mandatory | Media tray 1 hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.9 | ScalarmtHardwareVpdManufacturingIDNumber | read-only | mandatory | Media tray 1 hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.10 | ScalarmtHardwareVpdProductId | read-only | mandatory | Media tray 1 hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.11 | ScalarmtHardwareVpdSubManufacturerId | read-only | mandatory | Media tray 1 hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.12 | ScalarmtHardwareVpdClei | read-only | mandatory | Media tray 1 hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.13 | ScalarmtHardwareVpdCF1Capacity | read-only | mandatory | Media tray 1 hardware VPD CompactFlash card capacity. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.14 | ScalarmtHardwareVpdCF2Capacity | read-only | mandatory | Media tray 1 hardware VPD CompactFlash card capacity. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.15 | ScalarmtHardwareVpdBBU1 | read-only | mandatory | Indicates the presence of Battery Backup Unit 1. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.16 | ScalarmtHardwareVpdBBU2 | read-only | mandatory | Indicates the presence of Battery Backup Unit 2. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.17 | ScalarmtHardwareVpdHardwareRevisionString | read-only | mandatory | Media tray 1 hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.18 | ScalarmtHardwareVpdManufDate | read-only | mandatory | Media tray 1 hardware VPD Manufacture Date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.19 | ScalarmtHardwareVpdPartNumber | read-only | mandatory | Media tray 1 hardware VPD Part Number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.9.20 | ScalarmtHardwareVpdFruSerial | read-only | mandatory | Media tray 1 hardware VPD FRU Serial. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10 | Nodemt2HardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.10.3 | Scalarmt2HardwareVpdManufacturingId | read-only | mandatory | Media tray 2 hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.4 | Scalarmt2HardwareVpdFruNumber | read-only | mandatory | Media tray 2 hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.5 | Scalarmt2HardwareVpdHardwareRevision | read-only | mandatory | Media tray 2 hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the… |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.8 | Scalarmt2HardwareVpdUuid | read-only | mandatory | Media tray 2 hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.9 | Scalarmt2HardwareVpdManufacturingIDNumber | read-only | mandatory | Media tray 2 hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.10 | Scalarmt2HardwareVpdProductId | read-only | mandatory | Media tray 2 hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.11 | Scalarmt2HardwareVpdSubManufacturerId | read-only | mandatory | Media tray 2 hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.12 | Scalarmt2HardwareVpdClei | read-only | mandatory | Media tray 2 hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.13 | Scalarmt2HardwareVpdCF1Capacity | read-only | mandatory | Media tray 2 hardware VPD CompactFlash card capacity. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.14 | Scalarmt2HardwareVpdCF2Capacity | read-only | mandatory | Media tray 2 hardware VPD CompactFlash card capacity. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.17 | Scalarmt2HardwareVpdHardwareRevisionString | read-only | mandatory | Media tray 2 hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.18 | Scalarmt2HardwareVpdManufDate | read-only | mandatory | Media tray 2 hardware VPD Manufacture Date. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.19 | Scalarmt2HardwareVpdPartNumber | read-only | mandatory | Media tray 2 hardware VPD Part Number. |
| 1.3.6.1.4.1.2.3.51.2.2.21.10.20 | Scalarmt2HardwareVpdFruSerial | read-only | mandatory | Media tray 2 hardware VPD FRU Serial. |
| 1.3.6.1.4.1.2.3.51.2.2.21.12 | NodeblowerFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1 | TableblowerControllerVPDTable | not-accessible | mandatory | Table of blower controller firmware vital product data (VPD) information. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1.1 | RowblowerControllerVPDEntry | not-accessible | mandatory | Blower controller firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1.1.1 | ColumnblowerControllerVpdIndex | read-only | mandatory | Blower controller firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1.1.2 | ColumnblowerControllerVpdId | read-only | mandatory | The numeric blower ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1.1.3 | ColumnblowerControllerVpdExists | read-only | mandatory | Indicates whether the blower specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.12.1.1.7 | ColumnblowerControllerVpdRevision | read-only | mandatory | The revision of the blower controller firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13 | NodeblowerHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1 | TableblowerHardwareVpdTable | not-accessible | mandatory | Table of the blower hardware components. For consistent results, view as a table and not as individual entries. NOTE: Blowers are also referred to as Chassis C… |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1 | RowblowerHardwareVpdEntry | not-accessible | mandatory | Blower hardware VPD entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.1 | ColumnblowerHardwareVpdIndex | read-only | mandatory | Blower hardware VPD index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.2 | ColumnblowerHardwareVpdBayNumber | read-only | mandatory | Blower hardware VPD Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.3 | ColumnblowerHardwareVpdManufacturingId | read-only | mandatory | Blower hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.4 | ColumnblowerHardwareVpdFruNumber | read-only | mandatory | Blower hardware VPD FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.5 | ColumnblowerHardwareVpdHardwareRevision | read-only | mandatory | Blower hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. If a hardware revision is programmed in the OEM V… |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.8 | ColumnblowerHardwareVpdUuid | read-only | mandatory | Blower hardware VPD UUID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.9 | ColumnblowerHardwareVpdManufDate | read-only | mandatory | Blower hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.10 | ColumnblowerHardwareVpdPartNumber | read-only | mandatory | Blower hardware VPD Part Number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.11 | ColumnblowerHardwareVpdFruSerial | read-only | mandatory | Blower hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.12 | ColumnblowerHardwareVpdManufacturingIDNumber | read-only | mandatory | Blower hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.13 | ColumnblowerHardwareVpdProductId | read-only | mandatory | Blower hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.14 | ColumnblowerHardwareVpdSubManufacturerId | read-only | mandatory | Blower hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.15 | ColumnblowerHardwareVpdClei | read-only | mandatory | Blower hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.13.1.1.16 | ColumnblowerHardwareVpdHardwareRevisionString | read-only | mandatory | Blower hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. If a hardware revision is progra… |
| 1.3.6.1.4.1.2.3.51.2.2.21.14 | NodefanPackFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1 | TablefanPackControllerVPDTable | not-accessible | mandatory | Table of fan pack controller firmware vital product data (VPD) information. NOTE: Fan packs are also referred to as Power Module Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1.1 | RowfanPackControllerVPDEntry | not-accessible | mandatory | Fan Pack controller firmware VPD table entry |
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1.1.1 | ColumnfanPackControllerVpdIndex | read-only | mandatory | Fan Pack controller firmware VPD table index. |
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1.1.2 | ColumnfanPackControllerVpdId | read-only | mandatory | The numeric fan pack ID. |
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1.1.3 | ColumnfanPackControllerVpdExists | read-only | mandatory | Indicates whether the fan pack specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.2.21.14.1.1.7 | ColumnfanPackControllerVpdRevision | read-only | mandatory | The revision of the fan pack controller firmware. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15 | NodetapHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.15.3 | ScalartapHardwareVpdManufacturingId | read-only | mandatory | Telco Alarm Panel hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.4 | ScalartapHardwareVpdFruNumber | read-only | mandatory | Telco Alarm Panel hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT o… |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.5 | ScalartapHardwareVpdHardwareRevision | read-only | mandatory | Telco Alarm Panel hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.8 | ScalartapHardwareVpdUuid | read-only | mandatory | Telco Alarm Panel hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.9 | ScalartapHardwareVpdManufDate | read-only | mandatory | Telco Alarm Panel hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.10 | ScalartapHardwareVpdPartNumber | read-only | mandatory | Telco Alarm Panel hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT … |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.11 | ScalartapHardwareVpdFruSerial | read-only | mandatory | Telco Alarm Panel hardware VPD FRU Serial. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT o… |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.12 | ScalartapHardwareVpdManufacturingIDNumber | read-only | mandatory | Telco Alarm Panel hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.13 | ScalartapHardwareVpdProductId | read-only | mandatory | Telco Alarm Panel hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.14 | ScalartapHardwareVpdSubManufacturerId | read-only | mandatory | Telco Alarm Panel hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.15 | ScalartapHardwareVpdClei | read-only | mandatory | Telco Alarm Panel hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.15.16 | ScalartapHardwareVpdHardwareRevisionString | read-only | mandatory | Telco Alarm Panel hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This MIB object… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16 | NodencHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1 | TablencHardwareVpdTable | not-accessible | deprecated | Table of the Network Clock hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1 | RowncHardwareVpdEntry | not-accessible | deprecated | Network Clock hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.1 | ColumnncHardwareVpdIndex | read-only | deprecated | Network Clock hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.2 | ColumnncHardwareVpdBayNumber | read-only | deprecated | Network Clock hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.3 | ColumnncHardwareVpdManufacturingId | read-only | deprecated | Network Clock hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.4 | ColumnncHardwareVpdFruNumber | read-only | deprecated | Network Clock hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.5 | ColumnncHardwareVpdHardwareRevision | read-only | deprecated | Network Clock hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter H… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.8 | ColumnncHardwareVpdUuid | read-only | deprecated | Network Clock hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.9 | ColumnncHardwareVpdManufDate | read-only | deprecated | Network Clock hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.10 | ColumnncHardwareVpdPartNumber | read-only | deprecated | Network Clock hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.11 | ColumnncHardwareVpdFruSerial | read-only | deprecated | Network Clock hardware VPD FRU serial number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter H… |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.12 | ColumnncHardwareVpdManufacturingIDNumber | read-only | deprecated | Network Clock hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.13 | ColumnncHardwareVpdProductId | read-only | deprecated | Network Clock hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.14 | ColumnncHardwareVpdSubManufacturerId | read-only | deprecated | Network Clock hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.15 | ColumnncHardwareVpdClei | read-only | deprecated | Network Clock hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.16.1.1.16 | ColumnncHardwareVpdHardwareRevisionString | read-only | deprecated | Network Clock hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.17 | NodemxHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1 | TablemxHardwareVpdTable | not-accessible | mandatory | Table of the Multiplexer Expansion Module hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is … |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1 | RowmxHardwareVpdEntry | not-accessible | mandatory | Multiplexer Expansion Module hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.1 | ColumnmxHardwareVpdIndex | read-only | mandatory | Multiplexer Expansion Module hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCente… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.2 | ColumnmxHardwareVpdBayNumber | read-only | mandatory | Multiplexer Expansion Module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blade… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.3 | ColumnmxHardwareVpdManufacturingId | read-only | mandatory | Multiplexer Expansion Module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.4 | ColumnmxHardwareVpdFruNumber | read-only | mandatory | Multiplexer Expansion Module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blade… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.5 | ColumnmxHardwareVpdHardwareRevision | read-only | mandatory | Multiplexer Expansion Module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is fo… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.8 | ColumnmxHardwareVpdUuid | read-only | mandatory | Multiplexer Expansion Module hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.9 | ColumnmxHardwareVpdManufDate | read-only | mandatory | Multiplexer Expansion Module hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.10 | ColumnmxHardwareVpdPartNumber | read-only | mandatory | Multiplexer Expansion Module hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for Blad… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.11 | ColumnmxHardwareVpdFruSerial | read-only | mandatory | Multiplexer Expansion Module hardware VPD FRU Serial Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is fo… |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.12 | ColumnmxHardwareVpdManufacturingIDNumber | read-only | mandatory | Multiplexer Expansion Module hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.13 | ColumnmxHardwareVpdProductId | read-only | mandatory | Multiplexer Expansion Module hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.14 | ColumnmxHardwareVpdSubManufacturerId | read-only | mandatory | Multiplexer Expansion Module hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.15 | ColumnmxHardwareVpdClei | read-only | mandatory | Multiplexer Expansion Module hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.17.1.1.16 | ColumnmxHardwareVpdHardwareRevisionString | read-only | mandatory | Multiplexer Expansion Module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This… |
| 1.3.6.1.4.1.2.3.51.2.2.21.18 | NodestmHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1 | TablestmHardwareVpdTable | not-accessible | mandatory | Table of the Storage Module hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1 | RowstmHardwareVpdEntry | not-accessible | mandatory | Storage Module hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.1 | ColumnstmHardwareVpdIndex | read-only | mandatory | Storage Module hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.2 | ColumnstmHardwareVpdBayNumber | read-only | mandatory | Storage Module hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.3 | ColumnstmHardwareVpdManufacturingId | read-only | mandatory | Storage Module hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.4 | ColumnstmHardwareVpdFruNumber | read-only | mandatory | Storage Module hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.5 | ColumnstmHardwareVpdHardwareRevision | read-only | mandatory | Storage Module hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. If… |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.8 | ColumnstmHardwareVpdUuid | read-only | mandatory | Storage Module hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.9 | ColumnstmHardwareVpdManufDate | read-only | mandatory | Storage Module hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.10 | ColumnstmHardwareVpdPartNumber | read-only | mandatory | Storage Module hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.11 | ColumnstmHardwareVpdFruSerial | read-only | mandatory | Storage Module hardware VPD FRU Serial Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.12 | ColumnstmHardwareVpdManufacturingIDNumber | read-only | mandatory | Storage Module hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.13 | ColumnstmHardwareVpdProductId | read-only | mandatory | Storage Module hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.14 | ColumnstmHardwareVpdSubManufacturerId | read-only | mandatory | Storage Module hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.15 | ColumnstmHardwareVpdClei | read-only | mandatory | Storage Module hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.18.1.1.16 | ColumnstmHardwareVpdHardwareRevisionString | read-only | mandatory | Storage Module hardware VPD hardware revision in string format. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is… |
| 1.3.6.1.4.1.2.3.51.2.2.21.19 | NodestmFirmwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1 | TablestmFirmwareVpdTable | not-accessible | mandatory | Table of the Storage Module firmware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1 | RowstmFirmwareVpdEntry | not-accessible | mandatory | Storage Module firmware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1.1 | ColumnstmFirmwareVpdIndex | read-only | mandatory | Storage Module firmware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1.2 | ColumnstmFirmwareVpdType | read-only | mandatory | Storage Module firmware VPD type. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1.3 | ColumnstmFirmwareVpdBuildId | read-only | mandatory | Storage Module firmware VPD build ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1.4 | ColumnstmFirmwareVpdReleaseDate | read-only | mandatory | Storage Module firmware VPD release date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.19.1.1.5 | ColumnstmFirmwareVpdRevision | read-only | mandatory | Storage Module firmware VPD revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21 | NodebbuHardwareVpd | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1 | TablebbuHardwareVpdTable | not-accessible | mandatory | Table of the Battery Backup Unit hardware components. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS o… |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1 | RowbbuHardwareVpdEntry | not-accessible | mandatory | Battery Backup Unit hardware VPD entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.1 | ColumnbbuHardwareVpdIndex | read-only | mandatory | Battery Backup Unit hardware VPD index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.2 | ColumnbbuHardwareVpdBayNumber | read-only | mandatory | Battery Backup Unit hardware VPD Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.3 | ColumnbbuHardwareVpdManufacturingId | read-only | mandatory | Battery Backup Unit hardware VPD manufacturing ID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.4 | ColumnbbuHardwareVpdFruNumber | read-only | mandatory | Battery Backup Unit hardware VPD FRU number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.5 | ColumnbbuHardwareVpdHardwareRevision | read-only | mandatory | Battery Backup Unit hardware VPD hardware revision. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS onl… |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.8 | ColumnbbuHardwareVpdUuid | read-only | mandatory | Battery Backup Unit hardware VPD UUID. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.9 | ColumnbbuHardwareVpdManufDate | read-only | mandatory | Battery Backup Unit hardware VPD manufacture Date. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.10 | ColumnbbuHardwareVpdPartNumber | read-only | mandatory | Battery Backup Unit hardware VPD Part Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.11 | ColumnbbuHardwareVpdFruSerial | read-only | mandatory | Battery Backup Unit hardware VPD FRU Serial Number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS onl… |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.12 | ColumnbbuHardwareVpdManufacturingIDNumber | read-only | mandatory | Battery Backup Unit hardware VPD manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.13 | ColumnbbuHardwareVpdProductId | read-only | mandatory | Battery Backup Unit hardware VPD product ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.14 | ColumnbbuHardwareVpdSubManufacturerId | read-only | mandatory | Battery Backup Unit hardware VPD subsystem manufacturer ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.21.1.1.15 | ColumnbbuHardwareVpdClei | read-only | mandatory | Battery Backup Unit hardware VPD Common Language Equipment Identifier (CLEI). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22 | TableinventoryManagementActivityVpdTable | not-accessible | mandatory | Table of system component hardware VPD activity log. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1 | RowinventoryManagementActivityVpdEntry | not-accessible | mandatory | System component hardware VPD activity log entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.1 | ColumncomponentLevelActivityVpdIndex | read-only | mandatory | System component level VPD activity log index. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.2 | ColumncomponentLevelActivityVpdFruNumber | read-only | mandatory | System component level VPD activity log FRU number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.3 | ColumncomponentLevelActivityVpdSerialNumber | read-only | mandatory | System component level VPD activity log serial number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.4 | ColumncomponentLevelActivityVpdManufacturingId | read-only | mandatory | System component level VPD activity log manufacturing ID. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.5 | ColumncomponentLevelActivityVpdBayNumber | read-only | mandatory | System component level VPD activity log Bay number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.9 | ColumncomponentLevelActivityVpdAction | read-only | mandatory | System component level VPD activity log action (added/removed). For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.10 | ColumncomponentLevelActivityVpdTimestamp | read-only | mandatory | System component level VPD activity log timestamp. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.22.1.12 | ColumncomponentLevelActivityVpdModuleName | read-only | mandatory | The module name which this row is associated with. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.2.21.23 | NodereloadVpdData | |||
| 1.3.6.1.4.1.2.3.51.2.2.21.23.1 | ScalarreloadAllVpdData | read-write | mandatory | Reload all VPD data (firmware, hardware, MAC address, WWN/GUID and other Unique ID). NOTE: The value returned for the GET command is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.2.21.23.2 | ScalarreloadFwVpdData | read-write | mandatory | Reload firmware VPD data. NOTE: The value returned for the GET command is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.2.21.23.3 | ScalarreloadHwVpdData | read-write | mandatory | Reload hardware VPD data. NOTE: The value returned for the GET command is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.2.21.23.4 | ScalarreloadMACAddress | read-write | mandatory | Reload blade MAC addresses. NOTE: The value returned for the GET command is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.2.21.23.5 | ScalarreloadWwnGuidVpdData | read-write | mandatory | Reload blade and I/O module WWN/GUID and other VPD data. NOTE: The value returned for the GET command is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.2.22 | NodeairFilter | |||
| 1.3.6.1.4.1.2.3.51.2.2.22.1 | NodepassiveAirFilter | |||
| 1.3.6.1.4.1.2.3.51.2.2.22.1.1 | ScalarpassiveAirFilterStatus | read-write | mandatory | Disable/Enable/Reset the passive air filter. When enabled, sending an enable or reset will reset the replace date. The reset command is only applicable in Blad… |
| 1.3.6.1.4.1.2.3.51.2.2.22.1.2 | ScalarpassiveAirFilterMonthFreq | read-write | mandatory | The chassis environment. 1 month indicates high dust, 3 months indicates moderate dust and, 6 months indicates low dust. NOTE: This MIB object is for BladeCent… |
| 1.3.6.1.4.1.2.3.51.2.2.22.1.3 | ScalarpassiveAirFilterReplaceDate | read-only | mandatory | The scheduled replacement date of the air filter. NOTE: This MIB object is for BladeCenter S and BladeCenter E Refresh only. |
| 1.3.6.1.4.1.2.3.51.2.2.23 | NodecomponentInformation | |||
| 1.3.6.1.4.1.2.3.51.2.2.23.1 | NodecomponentInventory | |||
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1 | TablecomponentInventoryTable | not-accessible | mandatory | Table of component inventory information. Not all components will provide every object defined in the ComponentInventoryEntry. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1 | RowcomponentInventoryEntry | not-accessible | mandatory | Component inventory information. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.1 | ColumncomponentInventoryTopologyPath | read-only | mandatory | The unique identifier for a row in this table. The chassis and each installed component is represented by a hardware topology tree, where each node in the tree… |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.2 | ColumncomponentInventoryInstance | read-only | mandatory | The slot number or instance of a particular component. Typically, if the component plugs into the chassis, this represents the slot number. However, some compo… |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.3 | ColumncomponentInventoryDescription | read-only | mandatory | A short text string describing the particular component. For the AMM and blades, this name will be the configured name or its serial number if no user configur… |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.4 | ColumncomponentInventoryMachineTypeModel | read-only | mandatory | The machine type and model number of this component. Typically, the format is XXXXYYY, where XXXX reprsents the machine type and YYY represents the model numbe… |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.5 | ColumncomponentInventoryMachineSerial | read-only | mandatory | The machine serial number of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.6 | ColumncomponentInventoryAssetID | read-only | mandatory | The asset identifier of this component, typically set by some other authority than the manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.7 | ColumncomponentInventoryPartNumber | read-only | mandatory | The part number of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.8 | ColumncomponentInventoryFRUNumber | read-only | mandatory | The Field Replaceable Unit (FRU) number of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.9 | ColumncomponentInventoryFRUSerialNumber | read-only | mandatory | The Field Replaceable Unit (FRU) serial number of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.10 | ColumncomponentInventoryManufactureID | read-only | mandatory | The text description of the manufacturer of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.11 | ColumncomponentInventoryHardwareRevision | read-only | mandatory | The hardware revision number of the this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.12 | ColumncomponentInventoryManufactureDate | read-only | mandatory | The date when the manufacturer created this component. The format is XXYY, where XX is the week number of the year 20YY. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.13 | ColumncomponentInventoryUUID | read-only | mandatory | The Universally Unique IDentifier (UUID) of this component, represented as a 16 byte hex number. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.14 | ColumncomponentInventoryProductID | read-only | mandatory | The product identifier of the component assigned by the manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.15 | ColumncomponentInventorySubManufactureID | read-only | mandatory | The text sub-description of the manufacturer of this component, often used to identify a supplier for a component which has multiple suppliers. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.16 | ColumncomponentInventoryCLEI | read-only | mandatory | The Common Language Equipment Identifier (CLEI) of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.17 | ColumncomponentInventoryAssetTag | read-only | mandatory | The asset tag of this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.18 | ColumncomponentInventorySpeed | read-only | mandatory | A speed designation for the component, for example, processor speed. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.19 | ColumncomponentInventoryIdentifier | read-only | mandatory | A unique identifier assigned by the manufacturer to the component, for example, a processor ID. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.20 | ColumncomponentInventorySize | read-only | mandatory | A size designation for the component, for example, a memory DIMM size or hard drive capacity. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.21 | ColumncomponentInventoryMemoryType | read-only | mandatory | The architecture specification of a memory device. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.22 | ColumncomponentInventoryProductName | read-only | mandatory | The product name assigned by the manufacturer for this component. For more detail, also refer to the componentInventoryDescription object. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.23 | ColumncomponentInventoryProductVersion | read-only | mandatory | The product version assigned by the manufacturer for this component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.24 | ColumncomponentInventoryProcessorType | read-only | mandatory | The type designation for processor components. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.25 | ColumncomponentInventoryProcessorFamily | read-only | mandatory | The family designation for processor components. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.26 | ColumncomponentInventoryProcessorCores | read-only | mandatory | The number of cores present on a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.27 | ColumncomponentInventoryProcessorThreads | read-only | mandatory | The number of threads present on a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.28 | ColumncomponentInventoryProcessorL1DCache | read-only | mandatory | The level 1 data cache size of a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.29 | ColumncomponentInventoryProcessorL1ICache | read-only | mandatory | The level 1 instruction cache size of a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.30 | ColumncomponentInventoryProcessorL2Cache | read-only | mandatory | The level 2 cache size of a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.31 | ColumncomponentInventoryProcessorL3Cache | read-only | mandatory | The level 3 cache size of a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.32 | ColumncomponentInventoryProcessorVoltage | read-only | mandatory | The voltage rating for a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.33 | ColumncomponentInventoryProcessorExtClock | read-only | mandatory | The external clock speed of a processor component. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.34 | ColumncomponentInventoryProcessorDataWidth | read-only | mandatory | The maximum data bus width capability of a processor component, expressed typically in bits. |
| 1.3.6.1.4.1.2.3.51.2.2.23.1.1.1.35 | ColumncomponentInventoryManufactureIDNum | read-only | mandatory | The identification number assigned for the component by the manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2 | NodecomponentFirmware | |||
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1 | TablecomponentFirmwareTable | not-accessible | mandatory | Table of component firmware information. Not all components will provide every object defined in the ComponentFirmwareEntry. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1 | RowcomponentFirmwareEntry | not-accessible | mandatory | Component firmware information. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.1 | ColumncomponentFirmwareTopologyPath | read-only | mandatory | The unique identifier for a component in this table. The chassis and each installed component is represented by a hardware topology tree, where each node in th… |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.2 | ColumncomponentFirmwareIndex | read-only | mandatory | Each component may have one or more types of firmware associated with it, and this index object identifies the particular instance. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.3 | ColumncomponentFirmwareComponentInstance | read-only | mandatory | The slot number or instance of a particular component. Typically, if the component plugs into the chassis, this represents the slot number. However, some compo… |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.4 | ColumncomponentFirmwareComponentDescription | read-only | mandatory | A short text string describing the particular component. For the AMM and blades, this name will be the configured name or its serial number if no user configur… |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.5 | ColumncomponentFirmwareType | read-only | mandatory | A text description of the type of firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.6 | ColumncomponentFirmwareBuildID | read-only | mandatory | A text description of the build identifier for this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.7 | ColumncomponentFirmwareReleaseDate | read-only | mandatory | A text description of the release date for this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.8 | ColumncomponentFirmwareFilename | read-only | mandatory | A text description of the filename of this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.9 | ColumncomponentFirmwareRevision | read-only | mandatory | A text description of the revision level of this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.10 | ColumncomponentFirmwareRevisionMajor | read-only | mandatory | A numeric identifier of the revision major number for this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.11 | ColumncomponentFirmwareRevisionMinor | read-only | mandatory | A numeric identifier of the revision minor number for this firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.12 | ColumncomponentFirmwareLevelStatus | read-only | mandatory | The level status of the firmware build ID. It has three possible values as Different (mismatch firmware build ID), Match (the same firmware build ID), Unique (… |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.13 | ColumncomponentFirmwarePendingBuildID | read-only | mandatory | A text description of the build identifier for this pending firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.14 | ColumncomponentFirmwarePendingReleaseDate | read-only | mandatory | A text description of the release date for this pending firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.15 | ColumncomponentFirmwarePendingRevision | read-only | mandatory | A text description of the revision level of this pending firmware load. |
| 1.3.6.1.4.1.2.3.51.2.2.23.2.1.1.20 | ColumncomponentFirmwareTypeID | read-only | mandatory | Indicates the type of firmware load with a numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.2.23.3 | ScalarcomponentInventoryReady | read-only | mandatory | When a blade management controller or the AMM is reset, the blade inventory data is refreshed in the AMM database. This includes items like IBM VPD (e.g. - ser… |
| 1.3.6.1.4.1.2.3.51.2.2.23.10 | TablecomponentDriveTable | not-accessible | mandatory | Table of information indicating presence of a disk drive on a component. The management module does not receive any inventory VPD from the component, so only t… |
| 1.3.6.1.4.1.2.3.51.2.2.23.10.1 | RowcomponentDriveEntry | not-accessible | mandatory | Component drive information. |
| 1.3.6.1.4.1.2.3.51.2.2.23.10.1.1 | ColumncomponentDriveTopologyPath | read-only | mandatory | The unique identifier for a row in this table. The chassis and each installed component is represented by a hardware topology tree, where each node in the tree… |
| 1.3.6.1.4.1.2.3.51.2.2.23.10.1.2 | ColumncomponentDriveDescription | read-only | mandatory | A short text string describing the particular drive on the component. |
| 1.3.6.1.4.1.2.3.51.2.3 | NodeerrorLogs | |||
| 1.3.6.1.4.1.2.3.51.2.3.4 | NodeeventLog | |||
| 1.3.6.1.4.1.2.3.51.2.3.4.2 | TablereadEventLogTable | not-accessible | mandatory | Table of event log entry information. |
| 1.3.6.1.4.1.2.3.51.2.3.4.2.1 | RowreadEventLogEntry | not-accessible | mandatory | Event log table entry |
| 1.3.6.1.4.1.2.3.51.2.3.4.2.1.1 | ColumnreadEventLogIndex | read-only | mandatory | The event log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.2.1.2 | ColumnreadEventLogString | read-only | mandatory | A string of data detailing an event. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.3 | ScalarclearEventLog | read-write | mandatory | Clear the event log. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.3.4.4 | ScalarmonitorLogStateEvents | read-write | mandatory | If disabled, it means the info LED will not turn on when the log gets full and no alerts will be sent out. If enabled, the LED will turn on when the log gets f… |
| 1.3.6.1.4.1.2.3.51.2.3.4.6 | TablereadEnhancedEventLogTable | not-accessible | mandatory | Table of enhanced event log entry information. |
| 1.3.6.1.4.1.2.3.51.2.3.4.6.1 | RowreadEnhancedEventLogEntry | not-accessible | mandatory | Enhaced Event log table entry, new entries could be added for new items. |
| 1.3.6.1.4.1.2.3.51.2.3.4.6.1.1 | ColumnreadEnhancedEventLogNumber | read-only | mandatory | The event log number for the enhanced event log. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.6.1.2 | ColumnreadEnhancedEventLogAttribute | read-only | mandatory | A string of data detailing an event log's attribute, such as the Event ID and Call Home Flag. The Event ID is a hexadecimal number representing an specific or … |
| 1.3.6.1.4.1.2.3.51.2.3.4.6.1.3 | ColumnreadEnhancedEventLogMessage | read-only | mandatory | A string of data detailing an event log message. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.10 | TablereadAuditLogTable | not-accessible | mandatory | Table of audit log entry information. Audit log includes the logs whose source is 'Audit' |
| 1.3.6.1.4.1.2.3.51.2.3.4.10.1 | RowreadAuditLogEntry | not-accessible | mandatory | Audit log table entry, new entries could be added for new items. |
| 1.3.6.1.4.1.2.3.51.2.3.4.10.1.1 | ColumnreadAuditLogNumber | read-only | mandatory | The audit log number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.10.1.2 | ColumnreadAuditLogAttribute | read-only | mandatory | A string of data detailing an audit eventlog's attribute. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.10.1.3 | ColumnreadAuditLogMessage | read-only | mandatory | A string of data detailing an audit event log message. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.11 | ScalarclearAuditLog | read-write | mandatory | Clear the audit log. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.3.4.12 | TablereadSystemLogTable | not-accessible | mandatory | Table of system log entry information. System log includes the logs whose source is other than 'Audit' |
| 1.3.6.1.4.1.2.3.51.2.3.4.12.1 | RowreadSystemLogEntry | not-accessible | mandatory | System log table entry, new entries could be added for new items. |
| 1.3.6.1.4.1.2.3.51.2.3.4.12.1.1 | ColumnreadSystemLogNumber | read-only | mandatory | The system log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.12.1.2 | ColumnreadSystemLogAttribute | read-only | mandatory | A string of data detailing an system event log's attribute. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.12.1.3 | ColumnreadSystemLogMessage | read-only | mandatory | A string of data detailing an system event log message. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.3.4.13 | ScalarclearSystemLog | read-write | mandatory | Clear the system log. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.4 | NodeconfigureSP | |||
| 1.3.6.1.4.1.2.3.51.2.4.1 | NoderemoteAccessConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.1 | NodegeneralRemoteCfg | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.1.3 | ScalarremoteAlertRetryDelay | read-write | mandatory | Number in seconds to delay between retries if sending a remote alert is unsuccessful. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.4 | ScalarremoteAlertRetryCount | read-write | mandatory | Number of additional times a remote alert will be retried if not successfully sent. A value of zero indicates no retries will be attempted. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.5 | ScalarremoteAlertEntryDelay | read-only | deprecated | Number in seconds to delay between entries if sending a remote alert is unsuccessful. NOTE: This object is no longer supported. However, for compatibilities sa… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.6 | ScalarremoteAccessTamperDelay | read-write | deprecated | This value is no longer supported and has been replaced by 'lockoutPeriod'. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.7 | ScalaruserAuthenticationMethod | read-write | mandatory | Use this field to specify how users attempting to login should be authenticated. There are two methods: Local authentication. Userid and password are verified … |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.9 | ScalarmaxSessionsPerLDAPUser | read-write | mandatory | The maximum number of simultaneous active sessions allowed for each LDAP user. If the value is 0, this option is disabled. The minimum value is 1 and the maxim… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.10 | ScalarauthenticationLoggingTimeout | read-write | mandatory | Use this option to set how long, in seconds, AMM will not log the authentication events for the same user. The default setting is 5 minutes. 0 indicates log al… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.11 | ScalartrackingIP | read-write | mandatory | This option indicates tracking different IP addresses for the same user is enabled or not. If it is enabled then an access every second from alternating IP add… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20 | NodeaccountSecurityManagement | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.1 | ScalaraccountSecurityLevel | read-write | mandatory | The level of security needed for local user login passwords. The legacy level: - no password required - no password expiration - no password re-use restriction… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2 | NodecustomSecuritySettings | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.1 | ScalarloginPasswordRequired | read-write | mandatory | If enabled, all users require a login password to access the AMM. If disabled, empty password is allowed and complex password rules will be disabled automatica… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.2 | ScalarpasswordExpirationPeriod | read-write | mandatory | The number of days before login passwords expire. The minimum value is 1 day and the maximum value is 365 days. The default value is 90 days. A value of 0 disa… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.3 | ScalardefaultAdminPasswordExpired | read-write | mandatory | If enabled, the factory default 'USERID' account password must be changed on next login. The default value is disabled. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.4 | ScalarminimumPasswordReuseCycle | read-write | mandatory | The number of unique passwords a user must choose before reusing a password. The default value is none. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.5 | ScalarcomplexPasswordRules | read-write | mandatory | If enabled, the minimum complexity rules will be enforced for all local login passwords and 'User login password required' rule will be enabled. The rules are … |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.6 | ScalarminimumDiffCharsPassword | read-write | mandatory | The required minimum number of characters in the new password different from the previous password. The default value is 2. A SET of this object is ignored unt… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.7 | ScalarchangePasswordFirstAccess | read-write | mandatory | If enabled, the login user will be forced to change their password on the first access after the account has been established or on the first access after an a… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.8 | ScalarinactivityAlertPeriod | read-write | mandatory | The period of time in days before generating an alert for a dormant account. This value applies to all login accounts, including the administrator account. The… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.9 | ScalarinactivityAlertDisablePeriod | read-write | mandatory | The period of time in days before generating an alert and disabling a dormant account. This value applies to all login accounts, excluding the administrator ac… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.10 | ScalarlockoutPeriod | read-write | mandatory | The period of time in minutes that a user is locked out after the maximum number of login failures was reached. The minimum value is is 1 minute and the maximu… |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.11 | ScalarmaxLoginFailures | read-write | mandatory | The maximum number of login failures before a user account is locked. A value of 0 disables this option. The default value is 5. |
| 1.3.6.1.4.1.2.3.51.2.4.1.1.20.2.12 | ScalarpasswordChangeInterval | read-write | mandatory | A minimum period of time that user is not able to change their own password. The range of acceptable values will be from 0 to 1440 (or 60 days). A value of 0 d… |
| 1.3.6.1.4.1.2.3.51.2.4.1.2 | NodeserialPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.2.1 | ScalarportBaud | read-write | mandatory | Baud rate for the serial port. |
| 1.3.6.1.4.1.2.3.51.2.4.1.2.2 | ScalarportParity | read-write | mandatory | Parity setting for the serial port. |
| 1.3.6.1.4.1.2.3.51.2.4.1.2.3 | ScalarportStopBits | read-write | mandatory | Number of stop bits for the serial port. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3 | NoderemoteAlertIds | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1 | TableremoteAlertIdsTable | not-accessible | mandatory | Table of remote alert entries. This table lets you configure remote alert recipients. You can define up to 12 unique recipients. NOTE: All selected alert event… |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1 | RowremoteAlertIdsEntry | not-accessible | mandatory | Remote alert entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.1 | ColumnremoteAlertIdEntryIndex | read-only | mandatory | Index for remote alert entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.2 | ColumnremoteAlertIdEntryStatus | read-write | mandatory | Remote alert entry status, invalid means entry not defined yet, disabledAndValid means entry defined but not enabled to send an alert, enabledAndValid means en… |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.3 | ColumnremoteAlertIdEntryIpOrHostAddress | read-write | mandatory | A null terminated string that either contains an IP address of the form '1.2.3.4' or a host name (if DNS is enabled) for the alert entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.4 | ColumnremoteAlertIdEntryTextDescription | read-write | mandatory | A null terminated string that contains a text description of this entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.5 | ColumnremoteAlertIdEntryNotificationType | read-write | mandatory | Remote alert entry notification method. Types include unknown when the type can't be determined (read-only), ibmDirectorOverLAN for a LAN alert sent over ether… |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.9 | ColumnremoteAlertIdEmailAddr | read-write | mandatory | A null terminated string that contains an E-Mail Address. For example, 'jeb@us.ibm.com'. Used only for an E-mail over LAN or E-Mail over PPP notification type. |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.1.1.13 | ColumnremoteAlertIdEntrySelectiveAlert | read-write | mandatory | Remote alert entry selective alert setting. A value of critOnlyAlerts will only send critical alerts to this remote alert recipient, a value of allAlerts will … |
| 1.3.6.1.4.1.2.3.51.2.4.1.3.30 | ScalargenerateTestAlert | read-write | mandatory | Generate a Test Alert. This will send a test alert to all configured and enabled remote alert recipients. The text portion of the alert will contain 'Applicati… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4 | NoderemoteAccessIds | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1 | TableremoteAccessIdsTable | not-accessible | mandatory | Table of remote access profiles. This table lets you to configure all login profiles. You can define up to 12 unique profiles. NOTE: By default, the management… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1 | RowremoteAccessIdsEntry | not-accessible | mandatory | Remote access entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.1 | ColumnremoteAccessIdEntryIndex | read-only | mandatory | Index for Remote access entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.2 | ColumnremoteAccessIdEntryUserId | read-write | mandatory | Remote access entry null terminated string that contains the user-id. It must not be a duplicate of any previously configured ones. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.3 | ColumnremoteAccessIdEntryPassword | read-write | mandatory | Remote access password. The password must contain at least one alphabetic and one non-alphabetic character and be at least 5 characters long, or you can leave … |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.7 | ColumnremoteAccessIdEntryEncodedLoginPw | read-write | deprecated | Used only for configuration save/restore. A null terminated string containing an encoded concatenation of the login ID and password separated by an ':'. This o… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.10 | ColumnremoteAccessIdEntryRole | read-only | mandatory | Indicates if user has supervisor, operator, or custom access. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.11 | ColumnremoteAccessIdEntryLoggedIn | read-only | mandatory | Indicates if user is currently logged in or not. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.12 | ColumnremoteAccessIdEntryLastLogin | read-only | mandatory | Timestamp for the last successful login by the user. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.13 | ColumnremoteAccessIdEntryPwdCompliant | read-only | mandatory | Indicates if user complies with all of the password rules currently in effect. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.14 | ColumnremoteAccessIdEntryPwdExp | read-only | mandatory | The number of days until the user's current password expires. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.15 | ColumnremoteAccessIdEntryDormant | read-only | mandatory | Indicates if the user account has been inactive for a specified amount of time based on inactivityAlertDisablePeriod in the customSecuritySettings section. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.16 | ColumnremoteAccessIdEntryState | read-only | mandatory | Indicates the state of the user: Active - normal state Disabled - user cannot use account until enabled by a supervisor or chassis user account manager. An acc… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.17 | ColumnremoteAccessIdEntryAction | read-write | mandatory | Actions that only a supervisor or chassis user account manager can perform for each user id: Enable - enables an account in the Disabled state Disable - disabl… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.18 | ColumnremoteAccessIdEntrySessionCount | read-only | mandatory | The number of sessions the user is currently logged in to. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.1.1.19 | ColumnremoteAccessIdEntryMaxSessions | read-write | mandatory | The maximum number of simultaneous active sessions allowed for the user. If the value is 0, this option is disabled. The minimum value is 1 and the maximum val… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2 | TableremoteAccessUserAuthorityLevelTable | not-accessible | mandatory | Table of user authority level profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1 | RowremoteAccessUserAuthorityLevelEntry | not-accessible | mandatory | User authority level entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.1 | ColumnualIndex | read-only | mandatory | Index for User Authority Level entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.2 | ColumnualId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.3 | ColumnualSupervisor | read-write | mandatory | User has no restrictions. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.4 | ColumnualReadOnly | read-write | mandatory | User has only read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart MM, restore defaults, upgrade the firmw… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.5 | ColumnualAccountManagement | read-write | mandatory | User can add/modify/delete users and change the global login settings in the Login Profiles panel. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.6 | ColumnualConsoleAccess | read-write | mandatory | User can access the remote console. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.7 | ColumnualConsoleAndVirtualMediaAccess | read-write | mandatory | User can access both the remote console and the virtual media feature. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.8 | ColumnualServerPowerAccess | read-write | mandatory | User can access the power on and restart functions for the remote server. These functions are available via the Power/Restart panel. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.9 | ColumnualAllowClearLog | read-write | mandatory | User can clear the event logs. Everyone can look at the event logs, but this particular permission is required to clear the logs. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.10 | ColumnualAdapterBasicConfig | read-write | mandatory | User can modify configuration parameters in the System Settings and Alerts panels. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.11 | ColumnualAdapterNetworkAndSecurityConfig | read-write | mandatory | User can modify configuration parameters in the Security, Network Protocols, Network Interface, Port Assignments, and Serial Port panels. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.2.1.12 | ColumnualAdapterAdvancedConfig | read-write | mandatory | User has no restrictions when configuring the adapter. In addition, the user is said to have administrative access to the RSA, meaning that the user can also p… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3 | TableremoteAccessRBSroleTable | not-accessible | mandatory | Table of RBS User Role profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1 | RowremoteAccessRBSroleEntry | not-accessible | mandatory | User Role entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.1 | ColumnroleIndex | read-only | mandatory | Index for RBS User Role entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.2 | ColumnroleId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.3 | ColumnrbsSupervisor | read-write | mandatory | User has no restrictions. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.4 | ColumnrbsOperator | read-write | mandatory | User has read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart MM, restore defaults, upgrade the firmware, … |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.5 | ColumnrbsChassisOperator | read-write | mandatory | User has ability to browse status and properties of chassis components (MM, blowers (chassis cooling devices), midplane, power modules, media tray. Ability to … |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.6 | ColumnrbsChassisAccountManagement | read-write | mandatory | User can add/modify/delete user login profiles. Ability to backup MM configuration to a file. Changing global login settings require chassis configuration auth… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.7 | ColumnrbsChassisLogManagement | read-write | mandatory | User has ability to clear the MM event log, change log policy settings, and backup MM configuration to a file. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.8 | ColumnrbsChassisConfiguration | read-write | mandatory | User can modify and save any chassis configuration parameter (except user profiles and event log settings). Ability to restore MM factory defaults if the user … |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.9 | ColumnrbsChassisAdministration | read-write | mandatory | User has ability to do MM firmware updates, modify chassis LEDs, restore MM factory defaults if the user also has chassis configuration permissions. Ability to… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.10 | ColumnrbsBladeOperator | read-write | mandatory | User has ability to browse status and properties of blades. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.11 | ColumnrbsBladeRemotePresence | read-write | mandatory | User has ability to access the Remote Control web panel and the functions provided on the panel: remote console (KVM) and remote disk. The ability to issue the… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.12 | ColumnrbsBladeConfiguration | read-write | mandatory | User can modify and save any blade configuration parameter. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.13 | ColumnrbsBladeAdministration | read-write | mandatory | User can power on/off and restart blades, activate standby blades, do firmware updates, and modify blade LEDs. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.14 | ColumnrbsSwitchModuleOperator | read-write | mandatory | User has ability to browse status and properties of I/O Modules, and to ping I/O Modules. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.15 | ColumnrbsSwitchModuleConfiguration | read-write | mandatory | User can modify the I/O Module IP address, configure I/O Module Advanced Management parameters, and restore factory defaults on an I/O Module. Note that a user… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.16 | ColumnrbsSwitchModuleAdministration | read-write | mandatory | User can power on/off and restart the I/O Modules, update I/O Module firmware, enable/disable the Fast POST and External Ports of an I/O Module. Note that a us… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.17 | ColumnrbsBladeRemotePresenseVideo | read-write | deprecated | User can browser Remote Control web panel and remote blade video. NOTE: This mib object is deprecated. This level of granularity is available via the LDAP snap… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.18 | ColumnrbsBladeRemotePresenseKVM | read-write | deprecated | User has ability to access the Remote Control web panel and the functions provided on the panel: remote console (KVM) and remote disk. NOTE: This mib object is… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.19 | ColumnrbsBladeRemotePresenseRdriveR | read-write | deprecated | User can mount remote blade driver, and have read access only. NOTE: This mib object is deprecated. This level of granularity is available via the LDAP snap-in… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.20 | ColumnrbsBladeRemotePresenseRdriveRW | read-write | deprecated | User can mount remote blade driver and have read/write access. NOTE: This mib object is deprecated. This level of granularity is available via the LDAP snap-in… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.21 | ColumnrbsChassisRemotePresenseRdoc | read-write | deprecated | User has ability to upload/delete own image to RDOC and also can start remote control web panel. NOTE: This mib object is deprecated. This level of granularity… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.3.1.22 | ColumnrbsRemotePresenceSupervisor | read-write | deprecated | User has ability to access the Remote Control web panel and the functions provided on the panel: remote console (KVM) and remote driver read/write, upload/dele… |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4 | TableremoteAccessRBSscopeTable | not-accessible | mandatory | Table of RBS User Scope profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1 | RowremoteAccessRBSscopeEntry | not-accessible | mandatory | User Scope entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.1 | ColumnscopeIndex | read-only | mandatory | Index for RBS User Scope Entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.2 | ColumnscopeId | read-only | mandatory | User ID |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.3 | ColumnrbsChassis | read-write | mandatory | User has access to the MM and chassis functions. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.4 | ColumnrbsBlade1 | read-write | mandatory | User has access to the blade in slot 1. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.5 | ColumnrbsBlade2 | read-write | mandatory | User has access to the blade in slot 2. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.6 | ColumnrbsBlade3 | read-write | mandatory | User has access to the blade in slot 3. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.7 | ColumnrbsBlade4 | read-write | mandatory | User has access to the blade in slot 4. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.8 | ColumnrbsBlade5 | read-write | mandatory | User has access to the blade in slot 5. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.9 | ColumnrbsBlade6 | read-write | mandatory | User has access to the blade in slot 6. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.10 | ColumnrbsBlade7 | read-write | mandatory | User has access to the blade in slot 7. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.11 | ColumnrbsBlade8 | read-write | mandatory | User has access to the blade in slot 8. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.12 | ColumnrbsBlade9 | read-write | mandatory | User has access to the blade in slot 9. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.13 | ColumnrbsBlade10 | read-write | mandatory | User has access to the blade in slot 10. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.14 | ColumnrbsBlade11 | read-write | mandatory | User has access to the blade in slot 11. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.15 | ColumnrbsBlade12 | read-write | mandatory | User has access to the blade in slot 12. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.16 | ColumnrbsBlade13 | read-write | mandatory | User has access to the blade in slot 13. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.17 | ColumnrbsBlade14 | read-write | mandatory | User has access to the blade in slot 14. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.18 | ColumnrbsSwitch1 | read-write | mandatory | User has access to I/O module 1. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.19 | ColumnrbsSwitch2 | read-write | mandatory | User has access to I/O module 2. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.20 | ColumnrbsSwitch3 | read-write | mandatory | User has access to I/O module 3. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.21 | ColumnrbsSwitch4 | read-write | mandatory | User has access to I/O module 4. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.22 | ColumnrbsSwitch5 | read-write | mandatory | User has access to I/O module 5. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.23 | ColumnrbsSwitch6 | read-write | mandatory | User has access to I/O module 6. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.24 | ColumnrbsSwitch7 | read-write | mandatory | User has access to I/O module 7. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.25 | ColumnrbsSwitch8 | read-write | mandatory | User has access to I/O module 8. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.26 | ColumnrbsSwitch9 | read-write | mandatory | User has access to I/O module 9. |
| 1.3.6.1.4.1.2.3.51.2.4.1.4.4.1.27 | ColumnrbsSwitch10 | read-write | mandatory | User has access to I/O module 10. |
| 1.3.6.1.4.1.2.3.51.2.4.1.5 | NodeuserInterfaces | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.5.1 | Scalarcli | read-write | mandatory | Enable/Disable CLI access to the MM (telnet and SSH). The value enabled(3) means both telnet and ssh are enabled. |
| 1.3.6.1.4.1.2.3.51.2.4.1.5.2 | Scalarsnmp | read-write | mandatory | Enable/Disable SNMP v1 and v3 access to the MM. |
| 1.3.6.1.4.1.2.3.51.2.4.1.5.3 | Scalartcm | read-write | mandatory | Enable/Disable TCM access to the MM. A value of 0 means disabled, any value from 1 to 20 means enabled. NOTE: AMM will provide a max of 20 connections for both… |
| 1.3.6.1.4.1.2.3.51.2.4.1.5.4 | Scalarweb | read-write | mandatory | Enable/Disable Web access (HTTP/HTTPS) to the MM. NOTE: Disabling web access to the MM will cause all currently active web sessions to disconnect, and you will… |
| 1.3.6.1.4.1.2.3.51.2.4.1.5.5 | Scalarstcm | read-write | mandatory | Enable/Disable STCM access to the MM. A value of 0 means disabled, any value from 1 to 20 means enabled. NOTE: AMM will provide a max of 20 connections for bot… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6 | NodemmSshClientAuth | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1 | TablemmSshClientAuthPubKeyTable | not-accessible | mandatory | A table that contains client authentication public key information. |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1 | RowmmSshClientAuthPubKeyEntry | not-accessible | mandatory | A information list about a particular SSH public key used for client authentication. The primary table index is the same value as the associated remoteAccessId… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.1 | ColumnmmSshClientAuthRemoteAccessIdIndex | not-accessible | mandatory | The primary table index is the same value as the associated remoteAccessIdEntryIndex used as an index into the remoteAccessIdsTable. |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.2 | ColumnmmSshClientAuthPubKeyIndex | not-accessible | mandatory | The secondary table index used to select one of the client authentication public keys for a particular remote access Id. The index is an integer value from 1 t… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.3 | ColumnmmSshClientAuthPubKeyType | read-only | mandatory | The type of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.4 | ColumnmmSshClientAuthPubKeySize | read-only | mandatory | The size of the SSH public key represented by this entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.5 | ColumnmmSshClientAuthPubKeyFingerprint | read-only | mandatory | The RSA fingerprint of the SSH public key represented by this entry. This value can be used with the SSH client to verify, on the initial connection, that the … |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.6 | ColumnmmSshClientAuthPubKeyAcceptFrom | read-write | mandatory | This is a filter that describes the set of SSH client IP addresses and host names that can establish SSH connections to the AMM authenticated by the public key… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.7 | ColumnmmSshClientAuthPubKeyComment | read-write | mandatory | This is a descriptive string that the administrator may use to help identify the public key represented by this entry. It serves no function in the operation o… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.8 | ColumnmmSshClientAuthPubKeyAction | read-write | mandatory | import(1) starts the TFTP file transfer of an SSH client authentication public key from the TFTP server to the AMM. The import operation is only accepted if th… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.1.1.9 | ColumnmmSshClientAuthPubKeyEntryStatus | read-write | mandatory | This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.2 | ScalarmmSshClientAuthPubKeyUnused | read-only | mandatory | The number of available storage locations that may be used to install additional Client Authentication Public Keys. This number decreases by one when a new key… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.3 | ScalarmmSshClientAuthPubKeyTftpServer | read-write | mandatory | IP address or host name of the TFTP server where an SSH client authentication public key is to be installed from or exported to. The address must be entered in… |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.4 | ScalarmmSshClientAuthPubKeyFileName | read-write | mandatory | File name on the TFTP server of an SSH client authentication public key. |
| 1.3.6.1.4.1.2.3.51.2.4.1.6.5 | ScalarmmSshClientAuthPubKeyFileFormat | read-write | mandatory | File format of SSH client authentication public key files imported from or exported to the TFTP file server. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7 | NodegroupProfiles | |||
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1 | TablegroupIdsTable | not-accessible | mandatory | Table of Group profiles. This table lets you to configure all group profiles. You can define up to 16 unique profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1.1 | RowgroupIdsEntry | not-accessible | mandatory | Group ID entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1.1.1 | ColumngroupIndex | read-only | mandatory | Index for Group IDs entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1.1.2 | ColumngroupId | read-write | mandatory | Group ID. It is a null terminated string that contains the group-id. It must not be a duplicate of any previously configured ones. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1.1.3 | ColumngroupRole | read-only | mandatory | Group Role. It indicates if the group has supervisor, operator, or custom access. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.1.1.9 | ColumngroupEntryStatus | read-write | mandatory | This object manages the creation and deletion of this entry. The steps recommended to add a new group are: 1. Create a new entry in this table groupEntryStatus… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2 | TablegroupRBSroleTable | not-accessible | mandatory | Table of Group Role profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1 | RowgroupRBSroleEntry | not-accessible | mandatory | Group Role entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.1 | ColumngroupRBSroleIndex | read-only | mandatory | Index for Group Role entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.2 | ColumngroupRBSroleId | read-only | mandatory | Group ID |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.3 | ColumngroupRBSSupervisor | read-write | mandatory | Group has no restrictions. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.4 | ColumngroupRBSOperator | read-write | mandatory | Group has read-only access, and cannot perform any save, modify, clear, or state affecting operations (e.g. restart MM, restore defaults, upgrade the firmware,… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.5 | ColumngroupRBSChassisOperator | read-write | mandatory | Group has ability to browse status and properties of chassis components (MM, blowers (chassis cooling devices), midplane, power modules, media tray. Ability to… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.6 | ColumngroupRBSChassisAccountManagement | read-write | mandatory | Group can add/modify/delete user login profiles. Ability to backup MM configuration to a file. Changing global login settings require chassis configuration aut… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.7 | ColumngroupRBSChassisLogManagement | read-write | mandatory | Group has ability to clear the MM event log, change log policy settings, and backup MM configuration to a file. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.8 | ColumngroupRBSChassisConfiguration | read-write | mandatory | Group can modify and save any chassis configuration parameter (except user profiles and event log settings). Ability to restore MM factory defaults if the grou… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.9 | ColumngroupRBSChassisAdministration | read-write | mandatory | Group has ability to do MM firmware updates, modify chassis LEDs, restore MM factory defaults if the group also has chassis configuration permissions. Ability … |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.10 | ColumngroupRBSBladeOperator | read-write | mandatory | Group has ability to browse status and properties of blades. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.11 | ColumngroupRBSBladeRemotePresence | read-write | mandatory | Group has ability to access the Remote Control web panel and the functions provided on the panel: remote console (KVM) and remote disk. The ability to issue th… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.12 | ColumngroupRBSBladeConfiguration | read-write | mandatory | Group can modify and save any blade configuration parameter. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.13 | ColumngroupRBSBladeAdministration | read-write | mandatory | Group can power on/off and restart blades, activate standby blades, do firmware updates, and modify blade LEDs. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.14 | ColumngroupRBSSwitchModuleOperator | read-write | mandatory | Group has ability to browse status and properties of I/O Modules, and to ping I/O Modules. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.15 | ColumngroupRBSSwitchModuleConfiguration | read-write | mandatory | Group can modify the I/O Module IP address, configure I/O Module Advanced Management parameters, and restore factory defaults on an I/O Module. Note that a gro… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.2.1.16 | ColumngroupRBSSwitchModuleAdministration | read-write | mandatory | Group can power on/off and restart the I/O Modules, update I/O Module firmware, enable/disable the Fast POST and External Ports of an I/O Module. Note that a g… |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3 | TablegroupRBSscopeTable | not-accessible | mandatory | Table of Group Scope profiles. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1 | RowgroupRBSscopeEntry | not-accessible | mandatory | Group Scope entries. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.1 | ColumngroupRBSscopeIndex | read-only | mandatory | Index for Group Scope Entry. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.2 | ColumngroupRBSscopeId | read-only | mandatory | Group ID |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.3 | ColumngroupRBSChassis | read-write | mandatory | Group has access to the MM and chassis functions. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.4 | ColumngroupRBSBlade1 | read-write | mandatory | Group has access to the blade in slot 1. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.5 | ColumngroupRBSBlade2 | read-write | mandatory | Group has access to the blade in slot 2. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.6 | ColumngroupRBSBlade3 | read-write | mandatory | Group has access to the blade in slot 3. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.7 | ColumngroupRBSBlade4 | read-write | mandatory | Group has access to the blade in slot 4. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.8 | ColumngroupRBSBlade5 | read-write | mandatory | Group has access to the blade in slot 5. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.9 | ColumngroupRBSBlade6 | read-write | mandatory | Group has access to the blade in slot 6. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.10 | ColumngroupRBSBlade7 | read-write | mandatory | Group has access to the blade in slot 7. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.11 | ColumngroupRBSBlade8 | read-write | mandatory | Group has access to the blade in slot 8. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.12 | ColumngroupRBSBlade9 | read-write | mandatory | Group has access to the blade in slot 9. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.13 | ColumngroupRBSBlade10 | read-write | mandatory | Group has access to the blade in slot 10. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.14 | ColumngroupRBSBlade11 | read-write | mandatory | Group has access to the blade in slot 11. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.15 | ColumngroupRBSBlade12 | read-write | mandatory | Group has access to the blade in slot 12. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.16 | ColumngroupRBSBlade13 | read-write | mandatory | Group has access to the blade in slot 13. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.17 | ColumngroupRBSBlade14 | read-write | mandatory | Group has access to the blade in slot 14. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.18 | ColumngroupRBSSwitch1 | read-write | mandatory | Group has access to I/O module 1. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.19 | ColumngroupRBSSwitch2 | read-write | mandatory | Group has access to I/O module 2. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.20 | ColumngroupRBSSwitch3 | read-write | mandatory | Group has access to I/O module 3. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.21 | ColumngroupRBSSwitch4 | read-write | mandatory | Group has access to I/O module 4. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.22 | ColumngroupRBSSwitch5 | read-write | mandatory | Group has access to I/O module 5. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.23 | ColumngroupRBSSwitch6 | read-write | mandatory | Group has access to I/O module 6. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.24 | ColumngroupRBSSwitch7 | read-write | mandatory | Group has access to I/O module 7. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.25 | ColumngroupRBSSwitch8 | read-write | mandatory | Group has access to I/O module 8. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.26 | ColumngroupRBSSwitch9 | read-write | mandatory | Group has access to I/O module 9. |
| 1.3.6.1.4.1.2.3.51.2.4.1.7.3.1.27 | ColumngroupRBSSwitch10 | read-write | mandatory | Group has access to I/O module 10. |
| 1.3.6.1.4.1.2.3.51.2.4.2 | NoderemoteAlerts | |||
| 1.3.6.1.4.1.2.3.51.2.4.2.1 | NoderemoteAlertsCrit | |||
| 1.3.6.1.4.1.2.3.51.2.4.2.1.1 | ScalarcritTemp | read-only | deprecated | Generate an alert if any of the monitored temperature sensors in the system exceed their critical threshold. NOTE: If a critical Temperature condition is detec… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.2 | ScalarcritVolt | read-only | deprecated | Generate a alert if any of the monitored power supply sensors in the system fall outside their specified critical operational range. NOTE: If a critical voltag… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.4 | ScalarcritMultiBlower | read-only | deprecated | Generate an alert if multiple blowers used for cooling the system fail. NOTE: Blowers are also referred to as Chassis Cooling Devices. NOTE: The legacy(0) mode… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.5 | ScalarcritPower | read-write | mandatory | Generate an alert if any of the system power supplies fail. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all … |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.6 | ScalarcritHardDrive | read-only | deprecated | Generate an alert if any of hard disk drives fail. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several releases. They… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.7 | ScalarcritVRM | read-only | deprecated | Generate an alert if any of VRM (voltage regulator modules) fail. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.8 | ScalarcritMultipleSwitchModule | read-only | deprecated | Generate an alert if all switch modules fail or are removed. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several rele… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.9 | ScalarcritInvalidConfig | read-only | deprecated | Generate an alert if the hardware configuration is incompatible. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several … |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.10 | ScalarcritBlade | read-write | mandatory | Generate an alert for any critical error condition on a blade. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for a… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.11 | ScalarcritIO | read-write | mandatory | Generate an alert for any critical error condition on I/O module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used fo… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.12 | ScalarcritStorage | read-write | mandatory | Generate an alert for any critical error condition on a Storage module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be u… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.13 | ScalarcritChassis | read-write | mandatory | Generate an alert for any critical error condition on chassis. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for a… |
| 1.3.6.1.4.1.2.3.51.2.4.2.1.14 | ScalarcritFan | read-write | mandatory | Generate an alert for any critical error condition on cooling devices. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be us… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2 | NoderemoteAlertsNonCrit | |||
| 1.3.6.1.4.1.2.3.51.2.4.2.2.2 | ScalarwarnSingleBlower | read-only | deprecated | Generate an alert if one blower used for cooling the system fails. NOTE: Blowers are also referred to as Chassis Cooling Devices. NOTE: The legacy(0) mode aler… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.3 | ScalarwarnTemp | read-only | deprecated | Generate an alert if any of the monitored temperature sensors in the system exceed their warning threshold. NOTE: The legacy(0) mode alerts should no longer be… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.4 | ScalarwarnVoltage | read-only | deprecated | Generate an alert if any of the monitored power supply sensors in the system fall outside their specified warning operational range. NOTE: The legacy(0) mode a… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.6 | ScalarwarnRedundantModule | read-only | deprecated | Generate an alert if any of the switch modules or management modules is failing or removed. NOTE: The legacy(0) mode alerts should no longer be used and have b… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.7 | ScalarwarnMediaTrayKVMSwitch | read-only | deprecated | Generate an alert if the system detects a Media Tray or KVM switching failure. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecate… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.10 | ScalarwarnLogFull | read-write | mandatory | Generate an alert if the system log reaches 100% full. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all alert… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.15 | ScalarwarnBlade | read-write | mandatory | Generate an alert for any warning condition on a blade. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all aler… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.16 | ScalarwarnIO | read-write | mandatory | Generate an alert for any warning condition on I/O module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all a… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.17 | ScalarwarnStorage | read-write | mandatory | Generate an alert for any warning condition on a Storage module. NOTE: This MIB object is for BCS only. NOTE: This object is valid when the alertMode object is… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.18 | ScalarwarnPower | read-write | mandatory | Generate an alert for any warning condition on power module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.19 | ScalarwarnChassis | read-write | mandatory | Generate an alert for any warning condition on chassis. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all aler… |
| 1.3.6.1.4.1.2.3.51.2.4.2.2.20 | ScalarwarnFan | read-write | mandatory | Generate an alert for any warning condition on cooling devices. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for … |
| 1.3.6.1.4.1.2.3.51.2.4.2.3 | NoderemoteAlertsSystem | |||
| 1.3.6.1.4.1.2.3.51.2.4.2.3.4 | ScalarsystemPowerOff | read-only | deprecated | Generate an alert if the system is powered off. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several releases. They ar… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.5 | ScalarsystemPowerOn | read-only | deprecated | Generate a alert if the system is powered on. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several releases. They are … |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.8 | ScalarsystemPFA | read-only | deprecated | Generate a alert if the system hardware detects a Predictive Failure Analysis(PFA) on PFA enabled hardware. NOTE: The legacy(0) mode alerts should no longer be… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.10 | ScalarsystemInventory | read-write | mandatory | Generate an alert if the a processor blade or media tray is added or removed. NOTE: This object is valid when the alertMode object is set enhanced(1) and shoul… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.11 | ScalarsystemLog75PctFull | read-write | mandatory | Generate an alert if the system log reaches 75% full. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for all alert … |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.12 | ScalarnetworkChangeNotification | read-write | mandatory | Generate an alert if the SP has restarted and the internal network has initialized successfully, or if an IP address change via a source other than the managem… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.13 | ScalarsystemBladeThrottling | read-only | deprecated | Generate an alert if any of the server blades are throttling. NOTE: The legacy(0) mode alerts should no longer be used and have been deprecated for several rel… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.14 | ScalarsystemPowerManagement | read-only | deprecated | Generate an alert if the system detects a power oversubscription condition or power supply mismatch in a power domain. NOTE: The legacy(0) mode alerts should n… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.15 | ScalarsystemRemoteLogin | read-write | mandatory | Generate an alert if the system detects a new user logged in from a remote site. NOTE: This object is valid when the alertMode object is set enhanced(1) and sh… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.16 | ScalarsystemBlade | read-write | mandatory | Generate an alert for any informational condition on a blade. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for al… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.17 | ScalarsystemIO | read-write | mandatory | Generate an alert for any informational condition on I/O module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.18 | ScalarsystemStorage | read-write | mandatory | Generate an alert for any informational condition on a Storage module. NOTE: This MIB object is for BCS only. NOTE: This object is valid when the alertMode obj… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.19 | ScalarsystemPower | read-write | mandatory | Generate an alert for any informational condition on power module. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used f… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.20 | ScalarsystemChassis | read-write | mandatory | Generate an alert for any informational condition on chassis. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used for al… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.21 | ScalarsystemFan | read-write | mandatory | Generate an alert for any informational condition on cooling device. NOTE: This object is valid when the alertMode object is set enhanced(1) and should be used… |
| 1.3.6.1.4.1.2.3.51.2.4.2.3.22 | ScalarsystemPWRDO | read-write | mandatory | Generate an alert for any informational condition on power on and power off. NOTE: This object is valid when the alertMode object is set enhanced(1) and should… |
| 1.3.6.1.4.1.2.3.51.2.4.2.4 | ScalaralertMode | read-write | mandatory | Selects which alert categories will be displayed on the web interface, which alert category objects are accessible through SNMP, and which SNMP trap type an al… |
| 1.3.6.1.4.1.2.3.51.2.4.3 | NodesecuritySettings | |||
| 1.3.6.1.4.1.2.3.51.2.4.3.1 | ScalardataEncryption | read-write | mandatory | If enabled, all confidential data will be encrypted. The default value is disabled. NOTE: Once the data is encrypted, the only way to reverse this process is t… |
| 1.3.6.1.4.1.2.3.51.2.4.3.2 | ScalartrespassWarning | read-write | mandatory | If enabled, a customizable trespass warning message is displayed via the Web and CLI interfaces. |
| 1.3.6.1.4.1.2.3.51.2.4.3.3 | ScalartrespassWarningDefault | read-write | mandatory | Reset the trespass warning to default value. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.4.3.4 | ScalartrespassMessage | read-write | mandatory | The value of the trespass warning message. |
| 1.3.6.1.4.1.2.3.51.2.4.4 | NodespClock | |||
| 1.3.6.1.4.1.2.3.51.2.4.4.1 | ScalarspClockDateAndTimeSetting | read-write | mandatory | MM clock date and time setting. A date-time specification for the local time of day. For example to set the date and time to March 4, 2001 at 06:00:00AM, set t… |
| 1.3.6.1.4.1.2.3.51.2.4.4.2 | ScalarspClockTimezoneSetting | read-write | mandatory | MM clock Greenwich Mean Time(GMT) offset and Daylight Saving Time(DST) settings. The following table lists GMT offsets and associated DST information. DST is n… |
| 1.3.6.1.4.1.2.3.51.2.4.5 | NodespIdentification | |||
| 1.3.6.1.4.1.2.3.51.2.4.5.1 | ScalarspTxtId | read-write | mandatory | MM text ID. NOTE: Do not put any 'space characters' at end of the ID. |
| 1.3.6.1.4.1.2.3.51.2.4.9 | NodenetworkConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1 | NodenetworkInterfaces | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1 | NodeextEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.1 | ScalarextEthernetInterfaceType | read-only | mandatory | The type of interface. Indicates 'Ethernet-1'. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.3 | ScalarextEthernetInterfaceHostName | read-write | mandatory | Contains the 64 byte null terminated DNS host name for this interface. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.4 | ScalarextEthernetInterfaceIPAddress | read-write | mandatory | Contains the IP address for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.5 | ScalarextEthernetInterfaceDataRate | read-write | mandatory | Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, 1G Auto or Auto. Note that not all AMM hardware supports the 1G Auto spee… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.6 | ScalarextEthernetInterfaceDuplexSetting | read-write | mandatory | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. When a user selects the 1G Auto speed set… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.7 | ScalarextEthernetInterfaceLAA | read-write | mandatory | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value mu… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.8 | ScalarextEthernetInterfaceDhcpEnabled | read-write | mandatory | Disable or enable DHCP on this interface. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.9 | ScalarextEthernetInterfaceGatewayIPAddress | read-write | mandatory | Contains the IP address of the gateway/router for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.10 | ScalarextEthernetInterfaceBIA | read-only | mandatory | Specifies the burned-in MAC (BIA) address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.13 | ScalarextEthernetInterfaceMTU | read-write | mandatory | Contains the Maximum Transmission Unit(MTU) for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.14 | ScalarextEthernetInterfaceSubnetMask | read-write | mandatory | Contains the subnet mask for the ethernet interface |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16 | NodedhcpEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.1 | ScalardhcpHostName | read-only | mandatory | Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.2 | ScalardhcpIPAddress | read-only | mandatory | Contains the IP address for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.3 | ScalardhcpGatewayIPAddress | read-only | mandatory | Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.4 | ScalardhcpSubnetMask | read-only | mandatory | Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.5 | ScalardhcpDomainName | read-only | mandatory | Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.6 | ScalardhcpDHCPServer | read-only | mandatory | Contains the DHCP server IP address used to acquire the DHCP settings. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.7 | ScalardhcpPrimaryDNSServer | read-only | mandatory | Contains the Primary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.8 | ScalardhcpSecondaryDNSServer | read-only | mandatory | Contains the Secondary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.1.16.9 | ScalardhcpTertiaryDNSServer | read-only | mandatory | Contains the tertiary DNS server, assigned by the DHCP server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2 | NodeintEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.1 | ScalarintEthernetInterfaceType | read-only | deprecated | The type of interface. Indicates 'PPP-1'. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.2 | ScalarintEthernetInterfaceEnabled | read-write | deprecated | Disable or enable the internal ethernet interface. NOTE: To alter any of the configuration settings for the ethernet interface, the following procedure should … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.4 | ScalarintEthernetInterfaceLocalIPAddress | read-write | deprecated | Contains the IP address for the MM side of the internal ethernet link. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.5 | ScalarintEthernetInterfaceDataRate | read-only | deprecated | Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, or Auto. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.6 | ScalarintEthernetInterfaceDuplexSetting | read-only | deprecated | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This Mib object is deprecated and n… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.7 | ScalarintEthernetInterfaceLAA | read-write | deprecated | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value mu… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.9 | ScalarintEthernetInterfaceGatewayIPAddress | read-write | deprecated | Contains the IP address of the gateway/router for the ethernet interface. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.10 | ScalarintEthernetInterfaceBIA | read-only | deprecated | Specifies the burned-in MAC (BIA) address. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.13 | ScalarintEthernetInterfaceMTU | read-only | deprecated | Contains the Maximum Transmission Unit (MTU) for the ethernet interface NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.2.14 | ScalarintEthernetInterfaceSubnetMask | read-write | deprecated | Contains the subnet mask for the ethernet interface. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3 | NodestandbyExtEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.1 | ScalarstandbyExtEthernetInterfaceType | read-only | mandatory | The type of interface. Indicates 'Ethernet-1'. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.3 | ScalarstandbyExtEthernetInterfaceHostName | read-write | mandatory | Contains the 64 byte null terminated DNS host name for this interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.4 | ScalarstandbyExtEthernetInterfaceIPAddress | read-write | mandatory | Contains the IP address for the ethernet interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5 | ScalarstandbyExtEthernetInterfaceDataRate | read-write | mandatory | Specifies the data transfer rate to be used over the ethernet interface: 10Mb, 100Mb, 1G Auto or Auto. NOTE: This MIB object is only applicable to systems with… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.6 | ScalarstandbyExtEthernetInterfaceDuplexSetting | read-write | mandatory | Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.7 | ScalarstandbyExtEthernetInterfaceLAA | read-write | mandatory | Specifies the locally administered MAC address. The locally administered address must be a hexadecimal value between 000000000000 - FFFFFFFFFFFF. This value mu… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.8 | ScalarstandbyExtEthernetInterfaceDhcpEnabled | read-write | mandatory | Disable or enable DHCP on this interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.9 | ScalarstandbyExtEthernetInterfaceGatewayIPAddress | read-write | mandatory | Contains the IP address of the gateway/router for the ethernet interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.10 | ScalarstandbyExtEthernetInterfaceBIA | read-only | mandatory | Specifies the burned-in MAC (BIA) address. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.13 | ScalarstandbyExtEthernetInterfaceMTU | read-write | mandatory | Contains the Maximum Transmission Unit (MTU) for the ethernet interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.14 | ScalarstandbyExtEthernetInterfaceSubnetMask | read-write | mandatory | Contains the subnet mask for the ethernet interface. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.15 | ScalaradvancedFailover | read-write | mandatory | User can enable advanced failover. off : no standby network interface ipswap: Standby network interface, swap IPs during failover ipnoswap: Standby network int… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16 | NodestandbyDhcpEthernetInterface | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.1 | ScalarstandbyDhcpHostName | read-only | mandatory | Contains the 64 byte null terminated DNS host name for this interface, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.2 | ScalarstandbyDhcpIPAddress | read-only | mandatory | Contains the IP address for the ethernet interface, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.3 | ScalarstandbyDhcpGatewayIPAddress | read-only | mandatory | Contains the IP address of the gateway/router for the ethernet interface, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.4 | ScalarstandbyDhcpSubnetMask | read-only | mandatory | Contains the Subnet Mask for the ethernet interface, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.5 | ScalarstandbyDhcpDomainName | read-only | mandatory | Contains the 64 byte null terminated Domain Name for this interface, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a st… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.6 | ScalarstandbyDhcpDHCPServer | read-only | mandatory | Contains the DHCP server IP address used to acquire the DHCP settings. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.7 | ScalarstandbyDhcpPrimaryDNSServer | read-only | mandatory | Contains the Primary DNS server, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.8 | ScalarstandbyDhcpSecondaryDNSServer | read-only | mandatory | Contains the Secondary DNS server, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16.9 | ScalarstandbyDhcpTertiaryDNSServer | read-only | mandatory | Contains the tertiary DNS server, assigned by the DHCP server. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4 | NodeextEthernetInterfaceIPv6 | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.1 | ScalarextEthernetInterfaceIPv6Type | read-only | mandatory | The type of interface. Indicates 'Ethernet-1'. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.2 | ScalarextEthernetInterfaceIPv6Enabled | read-write | mandatory | The current IPv6 enabled or disabled state of this AMM. NOTE: If IPv6 address(es) have been configured for one or more interfaces/protocols/services on this AM… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5 | NodeextEthernetInterfaceIPv6Config | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.1 | NodeextEthernetInterfaceIPv6LocalAddress | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.1.1 | ScalarextEthernetInterfaceIPv6LinkLocalAddress | read-only | mandatory | The IPv6 link local IP address for the ethernet interface. NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.2 | NodeextEthernetInterfaceIPv6StaticIPConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.2.1 | ScalarextEthernetInterfaceIPv6StaticIPConfigEnabled | read-write | mandatory | The IPv6 static IP address enabled or disabled state for the ethernet interface. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.2.2 | ScalarextEthernetInterfaceIPv6StaticIPAddress | read-write | mandatory | The IPv6 static IP address for the ethernet interface. NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.2.3 | ScalarextEthernetInterfaceIPv6StaticIPAddressPrefixLen | read-write | mandatory | The IPv6 static IP address prefix length for the ethernet interface. NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this object has the value … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.2.4 | ScalarextEthernetInterfaceIPv6StaticIPDefaultRoute | read-write | mandatory | The IPv6 static IP address default route for the ethernet interface. NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this object has the value … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3 | NodeextEthernetInterfaceIPv6AutoIPConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.1 | ScalarextEthernetInterfaceIPv6AutoIPConfigEnabled | read-write | mandatory | The IPv6 automatic IP configuration enabled or disabled state for the ethernet interface. NOTE: extEthernetInterfaceIPv6AutoIPConfigEnabled is the logical OR o… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2 | NodeextEthernetInterfaceDHCPv6Config | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.1 | ScalarextEthernetInterfaceDHCPv6Enabled | read-write | mandatory | The DHCPv6 enabled or disabled state for the ethernet interface. NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled is currently disabled, Disabling e… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.2 | ScalarextEthernetInterfaceDHCPv6IPAddress | read-only | mandatory | The IPv6 address for the ethernet interface, assigned by DHCPv6 server. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled is disabl… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.4 | ScalarextEthernetInterfaceDHCPv6DomainName | read-only | mandatory | The 64 byte Domain Name for the ethernet interface, assigned by the DHCPv6 server. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enable… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.5 | ScalarextEthernetInterfaceDHCPv6PrimaryDNSServer | read-only | mandatory | The primary DNS server, assigned by the DHCPv6 server. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 s… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.6 | ScalarextEthernetInterfaceDHCPv6SecondaryDNSServer | read-only | mandatory | The secondary DNS server, assigned by the DHCPv6 server. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled is disabled or if DHCPv6… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.7 | ScalarextEthernetInterfaceDHCPv6TertiaryDNSServer | read-only | mandatory | The tertiary DNS server, assigned by the DHCPv6 server. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled is disabled or if DHCPv6 … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.2.8 | ScalarextEthernetInterfaceDHCPv6Server | read-only | mandatory | The DHCPv6 server IPv6 address used to acquire the DHCP settings. NOTE: If extEthernetInterfaceIPv6Enabled or extEthernetInterfaceDHCPv6Enabled is disabled or … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3 | NodeextEthernetInterfaceIPv6StatelessAutoConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.1 | ScalarextEthernetInterfaceIPv6StatelessAutoConfigEnabled | read-write | mandatory | The IPv6 stateless auto-configuration enabled or disabled state for the ethernet interface. NOTE: If extEthernetfInterfaceDHCPv6Enabled is currently disabled, … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.2 | TableextEthernetInterfaceStatelessAutoConfigAddressesTable | not-accessible | mandatory | Table of stateless Auto-Config addresses entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.2.1 | RowextEthernetInterfaceStatelessAutoConfigAddressesEntry | not-accessible | mandatory | Stateless Auto-Config address entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.2.1.1 | ColumnextEthernetInterfaceStatelessAutoConfigAddressesIndex | read-only | mandatory | Index for stateless Auto-Config addresses. NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or extEthernetInterfaceIPv6Enabled is currently disabled… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.2.1.2 | ColumnextEthernetInterfaceStatelessAutoConfigAddresses | read-only | mandatory | The stateless Auto-Configuration IPv6 address. NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or extEthernetInterfaceIPv6Enabled is currently disa… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.4.5.3.3.2.1.3 | ColumnextEthernetInterfaceStatelessAutoConfigAddressesPrefixLen | read-only | mandatory | The stateless Auto-Configration address prefix length. NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or extEthernetInterfaceIPv6Enabled is curren… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5 | NodestandbyExtEthernetInterfaceIPv6 | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.1 | NodestandbyEthernetInterfaceIPv6LocalAddress | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.1.1 | ScalarstandbyEthernetInterfaceIPv6LinkLocalAddress | read-only | mandatory | The IPv6 link local IP address for the standby AMM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.2 | NodestandbyEthernetInterfaceIPv6StaticIPConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.2.1 | ScalarstandbyEthernetInterfaceIPv6StaticIPConfigEnabled | read-only | mandatory | The IPv6 static IP address state for the AMM. NOTE: This value may be altered through the extEthernetInterfaceIPv6StaticIPConfigEnabled object. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.2.2 | ScalarstandbyEthernetInterfaceIPv6StaticIPAddress | read-write | mandatory | The IPv6 static IP address for the standby AMM NOTE: If extEthernetInterfaceIPv6Enabled is currently disabled, this object has the value '0:0:0:0:0:0:0:0'. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.2.3 | ScalarstandbyEthernetInterfaceIPv6StaticIPAddressPrefixLen | read-only | mandatory | The IPv6 static IP address prefix length for the standyby AMM. NOTE: This value may be altered through the extEthernetInterfaceIPv6StaticIPAddressPrefixLen obj… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.2.4 | ScalarstandbyEthernetInterfaceIPv6StaticIPDefaultRoute | read-only | mandatory | The IPv6 static IP address default route for the standby AMM. NOTE: This value may be altered through the extEthernetInterfaceIPv6StaticIPDefaultRoute object. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.3 | NodestandbyEthernetInterfaceDHCPv6Config | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.3.1 | ScalarstandbyEthernetInterfaceDHCPv6Enabled | read-only | mandatory | The DHCPv6 enabled or disabled state for the standby AMM. NOTE: This field may be altered through the extEthernetInterfaceDHCPv6Enabled object. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.3.2 | ScalarstandbyEthernetInterfaceDHCPv6IPAddress | read-only | mandatory | The IPv6 address for the standby AMM assigned by DHCPv6 server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.3.4 | ScalarstandbyEthernetInterfaceDHCPv6DomainName | read-only | mandatory | The 64 byte Domain Name for the standby AMM assigned by the DHCPv6 server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.4 | TablestandbyEthernetInterfaceStatelessAutoConfigAddressesTable | not-accessible | mandatory | Table of stateless Auto-Config addresses entries. NOTE: If extEthernetInterfaceIPv6StatelessAutoConfigEnabled or extEthernetInterfaceIPv6Enabled is currently d… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.4.1 | RowstandbyEthernetInterfaceStatelessAutoConfigAddressesEntry | not-accessible | mandatory | Stateless Auto-Config address entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.4.1.1 | ColumnstandbyEthernetInterfaceStatelessAutoConfigAddressesIndex | read-only | mandatory | Index for stateless Auto-Config addresses. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.4.1.2 | ColumnstandbyEthernetInterfaceStatelessAutoConfigAddresses | read-only | mandatory | The stateless Auto-Configuration IPv6 address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.5.4.1.3 | ColumnstandbyEthernetInterfaceStatelessAutoConfigAddressesPrefixLen | read-only | mandatory | The stateless Auto-Configration address prefix length. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.10 | ScalarddnsStatus | read-write | mandatory | Dynamic DNS provides the capability for a networked device to notify a domain name server to change, in real time, the active DNS configuration of its configur… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.11 | ScalarhostName | read-write | mandatory | Contains the DNS host name for this system. This object provides the exact same function as extEthernetInterfaceHostName |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.12 | ScalarstandbyHostName | read-write | mandatory | Contains the DNS host name for the standby. This object provides the exact same function as standbyExtEthernetInterfaceHostName and is only applicable to syste… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.13 | ScalardomainName | read-write | mandatory | The user assigned DNS domain name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.14 | ScalarstandbyDomainName | read-write | mandatory | The user assigned DNS domain name of the standby. This is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20 | NodevlanConfigure | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.1 | ScalarvlanGlobalState | read-write | mandatory | This object disables or enables the VLAN feature. The configuration objects for the VLAN are in the table, vlanTable. The default setting for this object is di… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.2 | ScalarvlanCommitTimeout | read-write | mandatory | This object is the number of minutes from the last VLAN-related object change until any non-committed changes will revert back to their previous settings. This… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.3 | ScalarvlanCommitState | read-write | mandatory | This object gives the status of whether there are VLAN-related changes pending that need to be committed, and allows a user to commit (save) any VLAN changes. … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20 | TablevlanTable | not-accessible | mandatory | This table contains the VLAN configuration objects. The default entry has an vlanEntryIndex equal to 1. The objects for this default entry are configurable. An… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1 | RowvlanEntry | not-accessible | mandatory | VLAN entries. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.1 | ColumnvlanEntryIndex | read-only | mandatory | Index for VLAN entry. If vlanEntryIndex is equal to 1, it is the Default VLAN entry and cannot be deleted. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.2 | ColumnvlanEntryVlanId | read-write | mandatory | Valid VLAN ID. Allowed values are 1..4094. If the entry is not valid, this object will have the value of 0. If this entry has the vlanEntryIndex value of 1 (de… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.3 | ColumnvlanEntryName | read-write | mandatory | This object allows the user to configure a text string name for this VLAN entry. This entry name is only used as a label for this entry. |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.4 | ColumnvlanEntryStatus | read-write | mandatory | This object manages the creation and deletion of this entry. The steps recommended to add a new VLAN entry are: 1. Create a new entry in this table vlanEntrySt… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.5 | ColumnvlanEntryState | read-write | mandatory | This object indicates whether this VLAN entry is enabled or disabled and allows the user to disable, enable or restart this entry except for the exceptions not… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.6 | ColumnvlanEntrySOLAccess | read-write | mandatory | This object allows the user to set whether the VLAN for this entry will have access to the Serial Over LAN (SOL) interface. Only one VLAN entry may have this o… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.7 | ColumnvlanEntrycKVMAccess | read-write | mandatory | This object allows the user to set whether the VLAN for this entry will have access to the installed cards for concurrent keyboard, video, and mouse (cKVM). On… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.8 | ColumnvlanEntryTagging | read-write | mandatory | This object allows the user to set whether VLAN tagging is enabled for this VLAN entry. This object is only configurable for the entry with the vlanEntryIndex … |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.9 | ColumnvlanEntryIOModuleAccess | read-only | mandatory | This read-only object indicates whether the VLAN for this entry will have access to the IO Modules. Only the VLAN entry with the vlanEntryIndex value of 1 will… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.10 | ColumnvlanEntryVlanDefault | read-write | mandatory | This object specifies which vlanTable entry is the 'default entry'. By default, the entry with the vlanEntryIndex value of 1 will have this object set to true(… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.31 | ColumnvlanEntryIPv4StaticAddress | read-write | mandatory | This object sets the IP address for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will have this object set to the IP addr… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.32 | ColumnvlanEntryIPv4StaticGateway | read-write | mandatory | This object sets the IP address for the IP gateway for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will have this object… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.33 | ColumnvlanEntryIPv4StaticMask | read-write | mandatory | This object sets the subnet mask for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will have this object set to the subnet… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.51 | ColumnvlanEntryIPv4SubnetRoute1 | read-write | mandatory | This object sets the IP address of the subnet route 1 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have t… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.52 | ColumnvlanEntryIPv4SubnetRouteMask1 | read-write | mandatory | This object sets the subnet route mask 1 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have this object se… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.53 | ColumnvlanEntryIPv4SubnetRoute2 | read-write | mandatory | This object sets the IP address of the subnet route 2 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have t… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.54 | ColumnvlanEntryIPv4SubnetRouteMask2 | read-write | mandatory | This object sets the subnet route mask 2 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have this object se… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.55 | ColumnvlanEntryIPv4SubnetRoute3 | read-write | mandatory | This object sets the IP address of the subnet route 3 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have t… |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.20.20.1.56 | ColumnvlanEntryIPv4SubnetRouteMask3 | read-write | mandatory | This object sets the subnet route mask 3 for this VLAN entry. The entry with the vlanEntryIndex value of 1 (default VLAN entry) will always have this object se… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3 | NodetcpProtocols | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1 | NodesnmpAgentConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.1 | ScalarsnmpSystemContact | read-write | mandatory | A NULL terminated 48 byte string that contains the SNMP agent contact name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.2 | ScalarsnmpSystemLocation | read-write | mandatory | A NULL terminated 48 byte string that contains the SNMP agent location name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.3 | ScalarsnmpSystemAgentTrapsDisable | read-write | mandatory | Disable or enable SNMP traps. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4 | NodesnmpAgentCommunityConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1 | TablesnmpCommunityTable | not-accessible | mandatory | Table of SNMP Community entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1 | RowsnmpCommunityEntry | not-accessible | mandatory | SNMP community entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.1 | ColumnsnmpCommunityEntryIndex | read-only | mandatory | Index for SNMP Agent Community entry. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.2 | ColumnsnmpCommunityEntryCommunityName | read-write | mandatory | SNMP Community entry name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.3 | ColumnsnmpCommunityEntryCommunityIpAddress1 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.4 | ColumnsnmpCommunityEntryCommunityIpAddress2 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.5 | ColumnsnmpCommunityEntryCommunityIpAddress3 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.6 | ColumnsnmpCommunityEntryCommunityViewType | read-write | mandatory | Access Level of the SNMPv1 managers. Note this parameter is set for each community. Therefore all three managers in the same community have the same access lev… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.7 | ColumnsnmpCommunityEntryCommunityIpAddress4 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.8 | ColumnsnmpCommunityEntryCommunityIpAddress5 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.9 | ColumnsnmpCommunityEntryCommunityIpAddress6 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.10 | ColumnsnmpCommunityEntryCommunityIpAddress7 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.11 | ColumnsnmpCommunityEntryCommunityIpAddress8 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.12 | ColumnsnmpCommunityEntryCommunityIpAddress9 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.13 | ColumnsnmpCommunityEntryCommunityIpAddress10 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.14 | ColumnsnmpCommunityEntryCommunityIpAddress11 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.4.1.1.15 | ColumnsnmpCommunityEntryCommunityIpAddress12 | read-write | mandatory | SNMP Community IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. This field also allows two … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.5 | Scalarsnmpv1SystemAgentEnable | read-write | mandatory | Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For exam… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.6 | Scalarsnmpv3SystemAgentEnable | read-write | mandatory | Disable or enable the SNMPv3 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For exam… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9 | NodesnmpAgentUserProfileConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1 | TablesnmpUserProfileTable | not-accessible | mandatory | Table of SNMPv3 User Profile entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1 | RowsnmpUserProfileEntry | not-accessible | mandatory | SNMP User Profile entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.1 | ColumnsnmpUserProfileEntryIndex | read-only | mandatory | Index for SNMPv3 Agent User Profile entry. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.3 | ColumnsnmpUserProfileEntryContextName | read-write | mandatory | SNMPv3 User Profile entry - Context name for users to access MIB objects. Note that context names can be duplicates and can be shared among users. Empty contex… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.4 | ColumnsnmpUserProfileEntryAuthProt | read-write | mandatory | SNMPv3 User Profile entry - Authentication Protocol supported by the user. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.6 | ColumnsnmpUserProfileEntryPrivProt | read-write | mandatory | SNMPv3 User Profile entry - Privacy Protocol supported by the user. The Privacy Password must be set and the Authentication Protocol must be md5 or sha before … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.7 | ColumnsnmpUserProfileEntryPrivPassword | read-write | mandatory | SNMPv3 User Profile entry - Privacy password for the user. NOTE: Value returned for the GET command is meaningless for this MIB object for security reasons. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.8 | ColumnsnmpUserProfileEntryViewType | read-write | mandatory | SNMPv3 User Profile entry - Access level (Get, Set, and Traps) of the user. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.1.9.1.1.9 | ColumnsnmpUserProfileEntryIpAddress | read-write | mandatory | SNMPv3 User Profile entry - IP address or host name. Can either be a dotted decimal IP string (e.g. 9.37.44.2) or if DNS is enabled a host name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2 | NodednsConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.1 | ScalardnsEnabled | read-write | mandatory | Disable or enable the DNS agent. NOTE: To alter any of the configuration settings for the DNS agent, the following procedure should be used: (1) This object sh… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.2 | ScalardnsServerIPAddress1 | read-write | mandatory | Contains the primary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.3 | ScalardnsServerIPAddress2 | read-write | mandatory | Contains the secondary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.4 | ScalardnsServerIPAddress3 | read-write | mandatory | Contains the tertiary DNS server IP address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.12 | ScalardnsServerIPv6Address1 | read-write | mandatory | Contains the primary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.13 | ScalardnsServerIPv6Address2 | read-write | mandatory | Contains the secondary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.14 | ScalardnsServerIPv6Address3 | read-write | mandatory | Contains the tertiary IPv6 DNS server address. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.2.20 | ScalardnsPriority | read-write | mandatory | Tells the order host names are resolved. The options are to either first resolve with an IPv6 DNS server or to first resolve with an IPv6 DNS server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.3 | NodesmtpConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.3.1 | ScalarsmtpServerNameOrIPAddress | read-write | mandatory | A NULL terminated 64 byte string that contains the SMTP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.3.2 | ScalarattachmentsToEmailAlerts | read-write | mandatory | Indicates if the service information should be attached to an email alert. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.3.3 | ScalarsmtpEmailDomain | read-write | mandatory | A NULL terminated string that contains the SMTP email domain. If this field is empty, the AMM IP address is used as the domain. However, some SMTP servers (e.g… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4 | NodetcpApplicationConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.1 | ScalartelnetInactivityTimeout | read-write | mandatory | Default is 120 seconds. Value of zero is no timeout. Max value is any positive 4 bytes value. Note that SSH also uses this timeout value to wait before disconn… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.2 | ScalarcommandModeInactivityTimeout | read-write | mandatory | The amount of time in seconds before the (Secure)TCP Command Mode times out. Default value of 0 means no timeout. Max value is any positive 4 byte value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.3 | ScalarsecureCommandModeEnable | read-write | mandatory | Set Secure TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.4 | ScalarcommandModeEnable | read-write | mandatory | Set TCP Command Mode number of connections. AMM will provide a max of 20 connections for both Secure TCP Command Mode and TCP Command Mode. A value of 0 means … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.5 | ScalarslpAddrType | read-write | mandatory | Set SLP address type to 0 (multicast) or 1 (broadcast). Note that when slpAddrType is set to broadcast value then the multicast address set in slpMulticastAddr… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.6 | ScalarslpMulticastAddr | read-write | mandatory | Service Locator Protocol Multicast address |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.7 | ScalarslpEnable | read-write | mandatory | Disable/Enable Service Location Protocol. NOTE: Change to Service Location Protocol will take effect after the next restart of the MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.9 | ScalartelnetEnable | read-write | mandatory | Disable/Enable telnet. NOTE: Change to telnet enable/disable will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.10 | ScalarsshEnable | read-write | mandatory | Disable/Enable SSH. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.11 | ScalarsshVersion | read-write | mandatory | When SSH is enabled, this object allows the user to configure whether the SSH server accepts all versions of client connections or whether it restricts the con… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.15 | ScalarsslServerEnable | read-write | mandatory | Disable/Enable SSL Server. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.16 | ScalarsslClientEnable | read-write | mandatory | Disable/Enable SSL Client. If no valid client or server certificate is in place, SSL client will not be allowed to set to enable. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.17 | ScalarftpEnable | read-write | mandatory | Disable/Enable FTP. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.19 | ScalartftpEnable | read-write | mandatory | Disable/Enable TFTP. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.20 | ScalarsmashTelnetEnable | read-write | mandatory | Disable/Enable SMASH CLP (System Management Architecture for Server Hardware Command Line Protocol) over Telnet. This option is not available on all systems. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.21 | ScalarsmashSshEnable | read-write | mandatory | Disable/Enable SMASH CLP (System Management Architecture for Server Hardware Command Line Protocol) over SSH. A valid SSH server key must be installed before e… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.22 | ScalartftpCreateEmptyFile | read-write | deprecated | This MIB object is no longer a requirement for TFTP and has been deprecated. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.23 | ScalarftpTimeout | read-write | mandatory | The amount of time before FTP times out. Default is 300 seconds. Value of zero is no timeout. Max value is any positive 4 byte value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.24 | ScalarrdEnable | read-write | mandatory | Disable/Enable Remote Disk. NOTE: Change to Remote Disk will take effect after the next restart of the MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.25 | ScalarrdocEnable | read-write | mandatory | Disable/Enable Remote Disk on Card. NOTE: Change to Remote Disk on Card will take effect after the next restart of the MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.26 | ScalarkvmEnable | read-write | mandatory | Disable/Enable KVM. NOTE: Change to KVM will take effect after the next restart of the MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27 | NodemmSshServerConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1 | TablemmSshServerHostKeyTable | not-accessible | mandatory | A table that contains per public/private host key pair information. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1.1 | RowmmSshServerHostKeyEntry | not-accessible | mandatory | A list of information about a particular public/private host key pair. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1.1.1 | ColumnmmSshServerHostKeyIndex | read-only | mandatory | The index of the public/private host key pair. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1.1.2 | ColumnmmSshServerHostKeyType | read-only | mandatory | The type of the public/private host key pair. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1.1.3 | ColumnmmSshServerHostKeySize | read-only | mandatory | The size of the public/private host key pair. NOTE: The AMM supports only the bits2048 value. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.1.1.4 | ColumnmmSshServerHostKeyFingerprint | read-only | mandatory | The RSA fingerprint of the public part of the host key pair. This value can be used with the SSH client to verify, on the initial connection, that the Secure S… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.2 | ScalarmmSshServerHostKeyGenerate | read-write | mandatory | Initiate the new Host Keys generation process for the AMM SSH Server. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.27.3 | ScalarmmSshServerHostKeyGenerateProgress | read-only | mandatory | Indicate the progress of the key generation process. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.4.28 | ScalarrpEnable | read-write | mandatory | Disable/Enable Remote Presence. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5 | NodetcpPortAssignmentCfg | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.1 | ScalartcpPortsRestoreDefault | read-write | mandatory | Reset all ports to default value. http: 80 https: 443 telnet: 23 ssh: 22 SNMP agent: 161 SNMP trap: 162 TCP Command Mode: 6090 Secure TCP Command Mode: 6091 Re… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.2 | ScalarhttpPortAssignment | read-write | mandatory | HTTP port number. Default value is 80. Once changed, the URL's have to include :port at the end. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.3 | ScalarhttpsPortAssignment | read-write | mandatory | SSL port number. Default value is 443. Once changed, the URL's have to include :port at the end. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.4 | ScalartelnetPortAssignment | read-write | mandatory | Telnet port number. Default value is 23. Port change will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.5 | ScalarsshPortAssignment | read-write | mandatory | SSH port number. Default value is 22. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.6 | ScalarsnmpAgentPortAssignment | read-write | mandatory | SNMP Agent port number. Default value is 161. Changes take effect after several seconds. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.7 | ScalarsnmpTrapsPortAssignment | read-write | mandatory | SNMP Traps port number. Default value is 162. Changes take effect after several seconds. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.8 | ScalarcommandModePortAssignment | read-write | mandatory | TCP Command Mode port number. Default value is 6090. Change will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.9 | ScalarsecureCommandModePortAssignment | read-write | mandatory | Secure TCP Command Mode port number. Default value is 6091. Change will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.10 | ScalarrdPortAssignment | read-write | deprecated | Remote Disk port number. Default value is 1044. MM has to be reset for change to take effect. NOTE: This mib object is deprecated and has been replaced by the … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.11 | ScalarrdocPortAssignment | read-write | deprecated | Remote Disk-on-Card port number. Default value is 1045. MM has to be reset for change to take effect. NOTE: This mib object is deprecated and has been replaced… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.12 | ScalarkvmPortAssignment | read-write | deprecated | Remote KVM port number. Default value is 3900. MM has to be reset for change to take effect. NOTE: This mib object is deprecated and has been replaced by the r… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.13 | ScalarftpPortAssignment | read-write | mandatory | FTP port number. Default value is 21. Port change will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.14 | ScalarftpDataPortAssignment | read-write | mandatory | FTP Data port number. Default value is 20. Port change will take effect immediately. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.15 | ScalartftpPortAssignment | read-write | mandatory | TFTP port number. Default value is 69. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.17 | ScalarsmashTelnetPortAssignment | read-write | mandatory | The port number for SMASH CLP (System Management Architecture for Server Hardware Command Line Protocol) over telnet. Default value is 50023. Change will take … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.18 | ScalarsmashSshPortAssignment | read-write | mandatory | The port number for SMASH CLP (System Management Architecture for Server Hardware Command Line Protocol) over SSH. Default value is 50022. This option is not a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.19 | ScalarslpPortAssignment | read-write | mandatory | Service Location Protocol port number. Default value is 427. NOTE: This value is normally required to be 427 to interoperate properly with other SLP enabled ap… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.20 | ScalarsdsPortAssignment | read-write | deprecated | Storage description service port number. Default value is 1046. MM has to be reset for change to take effect. NOTE: This mib object is deprecated and has been … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.5.21 | ScalarrpPortAssignment | read-write | mandatory | Remote Presence port. Default value is 3900. This port cannot be disabled since it is the single service entry point for all the services provided by AMM RPSer… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6 | NodeldapClientCfg | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.1 | ScalarldapServer1NameOrIPAddress | read-write | mandatory | A NULL terminated 255 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.2 | ScalarldapServer1PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.3 | ScalarldapServer2NameOrIPAddress | read-write | mandatory | A NULL terminated 255 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.4 | ScalarldapServer2PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.5 | ScalarldapServer3NameOrIPAddress | read-write | mandatory | A NULL terminated 255 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.6 | ScalarldapServer3PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.7 | ScalarldapRootDN | read-write | mandatory | A NULL terminated 255 byte string that contains the distinguished Name for root entry of directory tree. An example might look like dn=foobar,dn=com. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.8 | ScalarldapUserSearchBaseDN | read-write | deprecated | As part of the user authentication process, it is necessary to search the LDAP server for one or more attributes associated with a particular user. Any search … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.9 | ScalarldapGroupFilter | read-write | mandatory | This filter is used for group authentication. It specifies what group or groups that this MM belongs to. If left blank, group authentication is disabled. Other… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.10 | ScalarldapBindingMethod | read-write | mandatory | On initial binds to the LDAP server during user authentication, there are three options: Anonymous authentication: Bind attempt is made without a client DN or … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.11 | ScalarldapClientAuthenticationDN | read-write | mandatory | The initial bind to the LDAP server during user authentication can be performed with anonymous authentication, client based authentication, or UPN. The client … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.12 | ScalarldapClientAuthenticationPassword | read-write | mandatory | The client authentication password |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.13 | ScalarldapUIDsearchAttribute | read-write | mandatory | When the binding method selected is Anonymous authentication or Client authentication, the initial bind to the LDAP server is followed by a search request aime… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.14 | ScalarldapGroupSearchAttribute | read-write | mandatory | When the MM Group Filter name is configured, it is necessary to retrieve from the LDAP server the list of groups that a particular user belongs to. This is req… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.15 | ScalarldapLoginPermissionAttribute | read-write | mandatory | When a user successfully authenticates via a LDAP server, it is necessary to retrieve the login permissions for this user. In order to retrieve these permissio… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.16 | ScalarldapUseDNSOrPreConfiguredServers | read-write | mandatory | The MM contains a Version 2.0 LDAP Client that may be configured to provide user authentication through one or more LDAP servers. The LDAP server(s) to be used… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.17 | ScalarldapDomainSource | read-write | deprecated | The DNS SRV request sent to the DNS server must specify a domain name. The LDAP client will determine where to get this domain name based on one of the followi… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.18 | ScalarldapSearchDomain | read-write | deprecated | This parameter may be used as the domain name in the DNS SRV request, depending on how the Domain Source parameter is configured. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.19 | ScalarldapServiceName | read-write | deprecated | The DNS SRV request sent to the DNS server must also specify a service name. The configured value will be used for this purpose. If left blank, the default val… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.20 | ScalarldapRBSModelCfg | read-write | mandatory | There are two mechanisms to authenticate and authorize users on the AMM when using an LDAP-enabled server. The first mechanism (oldPermissionString), also know… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.21 | ScalarldapTargetName | read-write | mandatory | When administrator chooses Enhanced Role Based Security authentication model, he can associate one AMM with one managed target object in Snap-in (one tool to c… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.22 | ScalarldapAuthCfg | read-write | mandatory | If ldapAuthCfg is set to 0, LDAP server is used to authenticate and authorize users. If it is set to 1, LDAP server is only used to authenticate users. Note:LD… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.23 | ScalarldapForestName | read-write | mandatory | LDAP Forest Name. Note: LDAP Forest Name is only for Active Directory environment. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.24 | ScalarldapDomainName | read-write | mandatory | A NULL terminated 255 byte string that contains the LDAP Domain Name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.25 | ScalarldapServer4NameOrIPAddress | read-write | mandatory | A NULL terminated 255 byte string that contains the LDAP server host name or IP address (a.b.c.d). |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.6.26 | ScalarldapServer4PortNumber | read-write | mandatory | LDAP server port number. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7 | NodeuplinkCheckConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.1 | ScalaruplinkCheckEnabled | read-write | mandatory | Disable or enable network uplink checking for physical detection. NOTE: This MIB object is only applicable to systems with a standby MM. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.2 | ScalaruplinkCheckDelay | read-write | mandatory | Delay, in minutes (1-2880), between discovery of a failed network uplink and the subsequent MM failover for physical detection. NOTE: This MIB object is only a… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.3 | ScalarlogicalUplinkDestination | read-write | mandatory | Destination IP for MM to check its logical link. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is only applic… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.4 | ScalarlogicalUplinkCheckEnabled | read-write | mandatory | Disable or enable network uplink checking for logical detection. logicalUplinkDestination must be set to a non-zero IP Address before enable logical uplink che… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.5 | ScalarlogicalUplinkCheckDelay | read-write | mandatory | Delay, in minutes(1-2880), between discovery of a failed network uplink and the subsequent MM failover for logical detection. NOTE: This MIB object is only app… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.6 | ScalarphysicalUplinkCheckDelayInSecs | read-write | mandatory | Delay, in seconds(10-172800), between discovery of a failed network uplink and the subsequent MM failover for physical detection. NOTE: This MIB object is only… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.7 | ScalarlogicalUplinkCheckDelayInSecs | read-write | mandatory | Delay, in seconds(60-172800), between discovery of a failed network uplink and the subsequent MM failover for logical detection. NOTE: This MIB object is only … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.8 | ScalarlogicalUplinkIPv6Destination | read-write | mandatory | Destination IP for MM to check its logical link using IPv6. Specify a non-zero IP Address in order to enable logical uplink checking. NOTE: This MIB object is … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.7.9 | ScalarlogicalUplinkFailoverPolicy | read-write | mandatory | Determines when to failover if both an IPv4 and IPv6 destination have been configured. If set to 'either' the system will failover if either of the destination… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8 | NodentpConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.1 | ScalarntpEnable | read-write | mandatory | Disable/Enable the NTP client. The client will update the AMM system clock at the frequency specified. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.2 | ScalarntpIpAddressHostname | read-write | mandatory | NTP server's IP address or hostname if DNS is enabled and configured. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.3 | ScalarntpUpdateFrequency | read-write | mandatory | The frequency in minutes that the NTP service runs. The value range is 0 to 45000. If the NTP update frequency is set to 0, the AMM clock can only be synchroni… |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.4 | ScalarntpLastUpdate | read-only | mandatory | The date and time that the NTP server last updated the system clock. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.5 | ScalarntpUpdateClock | read-write | mandatory | Update the AMM system clock with the specified NTP server. A valid NTP server must be configured first. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.6 | ScalarntpAuthEntry | read-write | mandatory | The NTP v3 authentication entry to be used for time sync with a secure NTP server. The format of an authentication entry is <key index> <key type> <key>. <key … |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.8.7 | ScalarntpAuthEnable | read-write | mandatory | Enables/Disables NTP v3 authentication |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9 | NodesyslogConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.1 | ScalarsyslogSevFilterLevel | read-write | mandatory | syslogSevFilterLevel error/warning/information . |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2 | NodesyslogCollectorConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1 | TablesyslogCollectorTable | not-accessible | mandatory | Table of Syslog Collector entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1.1 | RowsyslogCollectorEntry | not-accessible | mandatory | Syslog Collector entries |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1.1.1 | ColumnsyslogCollectorIndex | read-only | mandatory | Index for Syslog Collector entry. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1.1.2 | ColumnsyslogCollectorHostnameOrIpAddress | read-write | mandatory | Syslog Collector IP address or host name. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1.1.3 | ColumnsyslogCollectorPort | read-write | mandatory | Syslog Collector port number. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.2.1.1.4 | ColumnsyslogCollectorEnable | read-write | mandatory | Syslog Collector enable/disable. |
| 1.3.6.1.4.1.2.3.51.2.4.9.3.9.3 | ScalarsyslogTestPacket | read-write | mandatory | Generate a test syslog packet. This will send a test syslog to all configured and enabled syslog collectors to assist in validating the configuration. NOTE: Va… |
| 1.3.6.1.4.1.2.3.51.2.4.10 | NodesolConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.4.10.1 | NodesolGlobalConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.10.1.1 | ScalarsolEnable | read-write | mandatory | Disable/Enable SOL dynamically. |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.2 | ScalarsolVlanId | read-write | mandatory | This is the virtual LAN ID for the internal management network between the MM and the Blade System Management Processors (BSMPs). The range of valid VLAN ID's … |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.3 | ScalarsolAccumulateTimeout | read-write | mandatory | This value specifies how much time in millisecond SOL to buffer data before sending the next SOL packet since the last SOL packet was transmitted. Valid value … |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.4 | ScalarsolCharSendThreshold | read-write | mandatory | This value specifies how many characters SOL to buffer before sending the next SOL packet since the last SOL packet was transmitted. Valid value is from 1 to 2… |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.5 | ScalarsolRetry | read-write | mandatory | Retry count. Valid value from 0-7. 0 means no retries after packet is transmitted. Packet will be dropped if no ACK/NACK received by the time retries expired. |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.6 | ScalarsolRetryInterval | read-write | mandatory | Retry Interval in 10 ms increment. Sets the time that the SOL will wait before the first retry and the time between retries when sending SOL packets to the rem… |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.7 | ScalarsolExitToCliKeySeq | read-write | mandatory | This is the keystroke sequence used to escape out of SOL session and back to CLI console. This sequence must have at least one character. The caret symbol (^) … |
| 1.3.6.1.4.1.2.3.51.2.4.10.1.8 | ScalarsolResetBladeKeySeq | read-write | mandatory | This is the keystroke sequence used to reset the blade while in SOL session console. This sequence must have at least one character. The caret symbol (^) has a… |
| 1.3.6.1.4.1.2.3.51.2.4.10.2 | NodesolBladeConfig | |||
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1 | TablesolBladeTable | not-accessible | mandatory | SOL Blade configuration table. |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1 | RowsolBladeEntry | not-accessible | mandatory | SOL Blade table entry |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.1 | ColumnsolBladeIndex | read-only | mandatory | SOL Blade table index. |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.2 | ColumnsolBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.3 | ColumnsolBladeEnable | read-write | mandatory | Disable or enable a SOL on a blade. |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.4 | ColumnsolBladeIpAddr | read-only | mandatory | IP address of the blade derived from the IP address range for the blade system management processors on the blades. NOTE: The IPv6 address for a blade can be v… |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.5 | ColumnsolBladeSessionStatus | read-only | mandatory | Status of a blade SOL session: solSessionNotReady: no SOL session connected to the blade. solSessionReady: there is an SOL session to the blade. solSessionActi… |
| 1.3.6.1.4.1.2.3.51.2.4.10.2.1.1.6 | ColumnsolBladeCapability | read-only | mandatory | Display whether or not the blade support SOL feature. |
| 1.3.6.1.4.1.2.3.51.2.4.11 | NodechassisInternalNetwork | |||
| 1.3.6.1.4.1.2.3.51.2.4.11.1 | ScalarcinsSupported | read-only | mandatory | Number of Chassis Internal Network (CIN) definitions supported. Currently a maximum of 14 CIN definitions can be supported. |
| 1.3.6.1.4.1.2.3.51.2.4.11.2 | ScalarcinGlobalEnable | read-write | mandatory | Disable/Enable Chassis Internal Network (CIN) function dynamically. Enabled: AMM reads the CIN entries. For each enabled entry, - If the CIN VLAN ID is new and… |
| 1.3.6.1.4.1.2.3.51.2.4.11.3 | TablecinTable | not-accessible | mandatory | Chassis Internal Network (CIN) configuration table. |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1 | RowcinEntry | not-accessible | mandatory | Chassis Internal Network (CIN) table entry. |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.1 | ColumncinIndex | read-only | mandatory | Chassis Internal Network (CIN) table index. |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.2 | ColumncinDefExists | read-only | mandatory | Indicates if a Chassis Internal Network (CIN) definition exists for this index or not. |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.3 | ColumncinDelete | read-write | mandatory | Delete Chassis Internal Network (CIN) definition. Works like CIN entry disabled. However, the entry is also deleted. NOTE: Value returned for the GET command i… |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.4 | ColumncinEnable | read-write | mandatory | Disable or enable a Chassis Internal Network (CIN) definition. Enabled: AMM reads the entry and creates a new CIN interface if the CIN VLAN ID is new and does … |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.5 | ColumncinId | read-write | mandatory | This is the Chassis Internal Network (CIN) Virtual LAN (VLAN) ID for the internal management network between the Management Module, I/O Module, and the blade O… |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.6 | ColumncinIpAddress | read-write | mandatory | Chassis Internal Network (CIN) IP address. Restrictions: - CIN entries cannot have matching IP addresses, with the exception of 0.0.0.0. - Multiple IP addresse… |
| 1.3.6.1.4.1.2.3.51.2.4.11.3.1.7 | ColumncinIpv6Address | read-write | mandatory | Chassis Internal Network (CIN) IPv6 address NOTE: When ipv4 is enable on one interface,this column will display all zero IPv6 address. |
| 1.3.6.1.4.1.2.3.51.2.4.11.4 | NodecinStatus | |||
| 1.3.6.1.4.1.2.3.51.2.4.11.4.1 | TablecinStatusTable | not-accessible | mandatory | Table of Chassis Internal Network (CIN) status entry information. |
| 1.3.6.1.4.1.2.3.51.2.4.11.4.1.1 | RowcinStatusEntry | not-accessible | mandatory | Chassis Internal Network (CIN) status table entry. |
| 1.3.6.1.4.1.2.3.51.2.4.11.4.1.1.1 | ColumncinStatusIndex | read-only | mandatory | The Chassis Internal Network (CIN) status log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.4.11.4.1.1.2 | ColumncinStatusString | read-only | mandatory | Status of a Chassis Internal Network (CIN) connection. For example: Index:1 VLANID:4094 IPADDR:192.168.70.100 MAC:01:0A:0B:00:01:01 Type:Learned Status:Operati… |
| 1.3.6.1.4.1.2.3.51.2.4.11.5 | TablecinPortConfigTable | not-accessible | mandatory | Chassis Internal Network (CIN) configuration table for viewing and configuring the protocol port information for a particular CIN entry. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1 | RowcinPortConfigEntry | not-accessible | mandatory | Chassis Internal Network (CIN) entry for viewing and configuring the protocol port information for a particular CIN entry. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.1 | ColumncinPortConfigCINIndex | read-only | mandatory | The identifier for the particular CIN configuration that these protocol port definitions are associated with. This object is the same as the cinIndex value in … |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.2 | ColumncinPortConfigIndex | read-only | mandatory | The identifier of a particular CIN protocol port configuration for a given CIN configuration as specified by cinPortConfigCINIndex. There can be up to 16 uniqu… |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.3 | ColumncinPortConfigProtocolID | read-write | mandatory | Indicates whether the port protocol definition is for a TCP or UDP port. If the value of notDefined(3) is returned, the entry has yet to be configured. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.4 | ColumncinPortConfigExternalPort | read-write | mandatory | The external port number specified for this port protocol definition, ranging from 1 to 65,534. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.5 | ColumncinPortConfigInternalPort | read-write | mandatory | The internal port number specified for this port protocol definition, ranging from 1 to 65,534. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.6 | ColumncinPortConfigEnable | read-write | mandatory | The status of this port protocol definition. |
| 1.3.6.1.4.1.2.3.51.2.4.11.5.1.7 | ColumncinPortConfigDirection | read-write | mandatory | The traffic direction specified for this port protocol definition. |
| 1.3.6.1.4.1.2.3.51.2.4.15 | NodeconfigurationManagement | |||
| 1.3.6.1.4.1.2.3.51.2.4.15.1 | ScalarsaveConfigurationToChassis | read-write | mandatory | Save the configuration settings from the AMM to the chassis. This operation may take several seconds. The input values for the SET command when AMM is installe… |
| 1.3.6.1.4.1.2.3.51.2.4.15.2 | ScalarrestoreConfigurationFromChassis | read-write | mandatory | Restore the configuration settings to the AMM from the BladeCenter chassis. NOTE: This MIB object is for AMM only and the value returned for the GET command is… |
| 1.3.6.1.4.1.2.3.51.2.4.15.3 | ScalarautoReadConfigInNewChassis | read-write | mandatory | The AMM will automatically read configuration settings from the midplane every time the AMM is inserted into a new chassis. NOTE: This MIB object is for AMM on… |
| 1.3.6.1.4.1.2.3.51.2.5 | NodetelcoManagement | |||
| 1.3.6.1.4.1.2.3.51.2.5.1 | NodetelcoAlarmReq | |||
| 1.3.6.1.4.1.2.3.51.2.5.1.1 | ScalartelcoAlarmSet | read-write | mandatory | Create a software alarm. An input octet string consists of the alarm severity level and the alarm description (40 bytes max). The following severity levels are… |
| 1.3.6.1.4.1.2.3.51.2.5.1.2 | ScalartelcoAlarmAck | read-write | mandatory | Acknowledge an alarm. An input octet string consists of the alarm key ID expressed as 'mmm:ggg:iii:aaa:sss' where: m : Module ID value of decimal digits(1-255)… |
| 1.3.6.1.4.1.2.3.51.2.5.1.3 | ScalartelcoAlarmClear | read-write | mandatory | Clear an active alarm. An input octet string consists of the alarm key ID expressed as 'mmm:ggg:iii:aaa:sss' where: m : Module ID value of decimal digits(1-255… |
| 1.3.6.1.4.1.2.3.51.2.5.3 | NodetelcoHWManagement | |||
| 1.3.6.1.4.1.2.3.51.2.5.3.1 | NodetappowerReq | |||
| 1.3.6.1.4.1.2.3.51.2.5.3.1.1 | Scalartappoweronoff | read-write | mandatory | Telco Alarm Panel power on or power off. If powering off a currently powered on Telco Alarm Panel, then all LEDs of this request card will be reset to OFF and … |
| 1.3.6.1.4.1.2.3.51.2.5.3.2 | NodencReq | |||
| 1.3.6.1.4.1.2.3.51.2.5.3.2.1 | TablencReqTable | not-accessible | deprecated | Table of the Network Clock Module Operations. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter H… |
| 1.3.6.1.4.1.2.3.51.2.5.3.2.1.1 | RowncReqEntry | not-accessible | deprecated | Network Clock Module Power ON/OFF entry. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT onl… |
| 1.3.6.1.4.1.2.3.51.2.5.3.2.1.1.1 | ColumnncReqIndex | read-only | deprecated | Network Clock Module Request index. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT only. |
| 1.3.6.1.4.1.2.3.51.2.5.3.2.1.1.2 | ColumnncReqBayNumber | read-only | deprecated | Network Clock Module Request Bay number. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BladeCenter HT onl… |
| 1.3.6.1.4.1.2.3.51.2.5.3.2.1.1.3 | ColumnncReqPoweronoff | read-write | deprecated | Request to power on/off for the specified Network Clock Module. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is… |
| 1.3.6.1.4.1.2.3.51.2.5.127 | NodetelcoOEM | |||
| 1.3.6.1.4.1.2.3.51.2.5.127.1 | ScalartelcoOEMs | read-only | mandatory | A bitmap of information about the contents of this subtree. The bitmap is a variable length string containing a list of 1's and 0's. Every bit that is set to 1… |
| 1.3.6.1.4.1.2.3.51.2.7 | NoderestartReset | |||
| 1.3.6.1.4.1.2.3.51.2.7.4 | ScalarrestartSPImmediately | read-write | mandatory | Restart the MM immediately. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.7.5 | ScalarrestartStandbyMM | read-write | mandatory | Restarts the Standby MM from the Primary MM. NOTE: Value returned for the GET command is meaningless for this MIB object. NOTE: This mib object is only applica… |
| 1.3.6.1.4.1.2.3.51.2.7.7 | ScalarswitchOverRedundantMM | read-write | mandatory | Switch over to the redundant Management Module. The failover will not occur if the standby or primary MM is in flashing mode. NOTE: Value returned for the GET … |
| 1.3.6.1.4.1.2.3.51.2.7.20 | ScalarresetSPConfigAndRestart | read-write | mandatory | Will cause all the MM information to be reset to it's initial factory defaults (all previous configuration information is lost) and the MM will be re-started. … |
| 1.3.6.1.4.1.2.3.51.2.7.21 | ScalarresetSPConfigAndRestartSaveLogs | read-write | mandatory | Will cause all the MM information to be reset to it's initial factory defaults (all previous configuration information is lost) and the MM will be re-started. … |
| 1.3.6.1.4.1.2.3.51.2.22 | Nodeblades | |||
| 1.3.6.1.4.1.2.3.51.2.22.1 | NodeprocessorBlade | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.1 | ScalarbladeMediaTrayBladeId | read-write | mandatory | Allocate the media tray to a blade of a BladeCenter system. On a get command, a blade ID of 0x00 means that no blade is currently using the device. A set comma… |
| 1.3.6.1.4.1.2.3.51.2.22.1.2 | ScalarbladeKVMBladeId | read-write | mandatory | Allocate the keyboard, video, and mouse ports (KVM) to a blade of a blade runner system. On a get command, a blade ID of 0x00 means that no blade is currently … |
| 1.3.6.1.4.1.2.3.51.2.22.1.3 | TablebladeBootSequenceTable | not-accessible | mandatory | Table of blade boot sequence information. Contains the boot sequence information for each blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1 | RowbladeBootSequenceEntry | not-accessible | mandatory | Boot sequence entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.1 | ColumnbootSequenceIndex | read-only | mandatory | Blade boot sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.2 | ColumnbootSequenceBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.3 | ColumnbootSequenceBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.4 | ColumnbootSequenceBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.5 | ColumnbootSequenceBladeHealthState | read-only | mandatory | The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings ex… |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.6 | ColumnbootSequenceBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.7 | ColumnbootSequence1 | read-write | mandatory | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, a… |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.8 | ColumnbootSequence2 | read-write | mandatory | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, a… |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.9 | ColumnbootSequence3 | read-write | mandatory | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, a… |
| 1.3.6.1.4.1.2.3.51.2.22.1.3.1.10 | ColumnbootSequence4 | read-write | mandatory | The boot device for this blade boot sequence. Note that some types of blades don't support floppy disk drive. It is recommended that all boot sequence 1,2 3, a… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4 | NodebladeRemoteControl | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1 | TablebladeRemoteControlTable | not-accessible | mandatory | Table of blade remote power control information. Contains power on/off enablement status for each blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1 | RowbladeRemoteControlEntry | not-accessible | mandatory | Remote power control entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.1 | ColumnremoteControlIndex | read-only | mandatory | Blade remote power control index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.2 | ColumnremoteControlBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.3 | ColumnremoteControlBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.4 | ColumnremoteControlBladePowerState | read-only | mandatory | The power state for blade. 0 = off, 1 = on, 3 = standby, 4 = hibernate, 255 = unknown. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.5 | ColumnremoteControlBladeHealthState | read-only | mandatory | The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings ex… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.6 | ColumnremoteControlBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.7 | ColumnremotePowerControlEnable | read-write | mandatory | Blade remote power control enablement status. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.8 | ColumnremoteMediaTrayControlEnable | read-write | mandatory | Blade media tray enablement status. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.9 | ColumnremoteKVMControlEnable | read-write | mandatory | Blade KVM enablement status. Note that some types of blades don't support KVM |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.10 | ColumnremoteWakeOnLanControlEnable | read-write | mandatory | Blade Wake On LAN enablement status. If WOL is not supported by the blade, it displays 'notApplicable' and WOL can not be enabled or disabled. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.1.1.11 | ColumnremoteMediaTraySwitchEnable | read-write | mandatory | Blade Remote Media Tray Switch enablement status. If the remote disk feature is disabled, this OID cannot be set. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2 | NodebladePolicy | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.1 | ScalarbladePolicyPowerControlEnable | read-write | mandatory | Blade remote power control enablement status policy. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.2 | ScalarbladePolicyMediaTrayControlEnable | read-write | mandatory | Blade media tray enablement status policy. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.3 | ScalarbladePolicyKVMControlEnable | read-write | mandatory | Blade KVM enablement status policy. Note that some types of blades don't support KVM. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.4 | ScalarbladePolicyWakeOnLanControlEnable | read-write | mandatory | Blade Wake On LAN enablement status policy. The notApplicable(255) enumeration is not valid for SET operations. NOTE: Value returned for the GET command is mea… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.5 | ScalarbladePolicyMediaTraySwitchEnable | read-write | mandatory | Blade Remote Media Tray Switch enablement status policy. If the remote disk feature is disabled, this OID cannot be set. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.6 | ScalarbladePolicyMultipleRemoteVideoEnable | read-write | mandatory | Blade multiple remote video sessions enablement status policy. A maximum users can access the video of the same blade from remote console when set to enabled. … |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.7 | ScalarbladePolicyAutoPowerOn | read-write | mandatory | Blade auto-power on policy. - restore: all blades will be powered on which were previously on. - auto: all blades will automatically be powered on when power i… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.8 | ScalarbladePolicyDisconnectionMode | read-write | mandatory | Blade disconnection mode. - noDisconnection: If the blade is already serving a maximum number of users, the requester can't get connection - forcedisconnection… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.9 | ScalarbladePolicySessionTimeOut | read-write | mandatory | Client session time out in minutes. If there is no remote presence activity, after that time, the session will be closed authomatically. |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.10 | ScalarbladePolicyRequestTimeOut | read-write | mandatory | Client connection request time out in seconds. In case of single session mode, if the requested user does not respond within this timeout, the user request wil… |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.11 | ScalarbladePolicyRetryTimeOut | read-write | mandatory | Client connection retry time out in seconds. It is possible that the current blade access is negotiated by other 2 clients. If the third comes it will need to … |
| 1.3.6.1.4.1.2.3.51.2.22.1.4.2.12 | ScalarbladePolicySessionLostTimeOut | read-write | mandatory | Client session lost in minutes. Amount of time before session closes due to loss of session, and user may regain control. This may happen if for example the cl… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5 | NodebladeMonitors | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1 | TablebladeSystemStatusTable | not-accessible | mandatory | Table of blade status information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1 | RowbladeSystemStatusEntry | not-accessible | mandatory | Blade system status entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.1 | ColumnbladeStatusIndex | read-only | mandatory | Blade system status index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.2 | ColumnbladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.3 | ColumnbladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.4 | ColumnbladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.5 | ColumnbladeHealthState | read-only | mandatory | The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings ex… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.6 | ColumnbladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.7 | ColumnbladeRemotePowerEnable | read-only | mandatory | Remote power state for the blade. 0x01 indicates enabled. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.8 | ColumnbladeRemoteMediaTrayEnable | read-only | mandatory | Remote Media Tray state for the blade. 0x01 indicates enabled. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.9 | ColumnbladeRemoteKVMEnable | read-only | mandatory | Remote keyboard/video/monitor state for the blade. 0x01 indicates enabled. Note that some types of blades don't support KVM |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.10 | ColumnbladeConnectionType | read-only | mandatory | Connection type of the expansion card number one. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.11 | ColumnbladeOwnsKVM | read-only | mandatory | Indicates whether the MM owns the KVM. 0 = false, 1 = true. Note that some types of blades don't support KVM |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.12 | ColumnbladeOwnsMediaTray | read-only | mandatory | Indicates whether the blade owns the Media Tray. 0 = false, 1 = true. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.13 | ColumnbladeRemoteWakeOnLanEnable | read-only | mandatory | Remote wake on LAN state for the blade. 0x01 indicates enabled. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.14 | ColumnbladeServerExpansion | read-only | mandatory | This shows whether this blade has an expansion board attached. A yes column indicates that an expansion board is installed for this blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.15 | ColumnbladeWidth | read-only | mandatory | The width of the blade including any supplement blade attached to it |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.16 | ColumnbladeSupportCapacityOnDemand | read-only | deprecated | This shows whether this blade support Capacity On Demand. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.17 | ColumnbladeServerExpansion2 | read-only | mandatory | This shows whether this blade has an expansion board attached. A yes column indicates that an expansion board is installed for this blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.21 | ColumnbladecKVMStatus | read-only | mandatory | This shows whether this blade has a concurrent keyboard, video, and mouse (cKVM) card installed and the status of cKVM on the blade. Not present: A cKVM card i… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.22 | ColumnbladeConnectionType2 | read-only | mandatory | Connection type of the expansion card number 2. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.23 | ColumnbladeConnectionType3 | read-only | mandatory | Connection type of the expansion card number 3. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.24 | ColumnbladeConnectionType4 | read-only | mandatory | Connection type of the expansion card number 4. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.25 | ColumnbladeConnectionType5 | read-only | mandatory | Connection type of the expansion card number 5. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.41 | ColumnbladeHighSpeedConnectionType | read-only | mandatory | Connection type of the high speed expansion card number 1. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.51 | ColumnbladeIOCompatibility | read-only | mandatory | I/O compatibility status for the blade. The possible values and their meanings are as follows: unknown: This indicates a communication error for the blade. ok:… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.1.1.52 | ColumnbladeInventoryReady | read-only | mandatory | When a blade management controller or the AMM is reset, the blade inventory data is refreshed in the AMM database. This includes items like IBM VPD (e.g. - ser… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2 | TablebladeHealthSummaryTable | not-accessible | mandatory | Table of blade health summary information. Contains information about the overall blade health status. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1 | RowbladeHealthSummaryEntry | not-accessible | mandatory | Blade health summary entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.1 | ColumnbladeHealthSummaryIndex | read-only | mandatory | Blade health summary index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.2 | ColumnbladeHealthSummaryBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.3 | ColumnbladeHealthSummarySeverity | read-only | mandatory | System health summary severity. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.4 | ColumnbladeHealthSummaryDescription | read-only | mandatory | System health summary description. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.2.1.5 | ColumnbladeHealthSummaryDateTime | read-only | mandatory | System health summary date time. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3 | TablebladeTemperaturesTable | not-accessible | mandatory | Table of blade temperatures information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1 | RowbladeTemperaturesEntry | not-accessible | mandatory | Blade temperatures table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.1 | ColumntemperatureIndex | read-only | mandatory | Blade temperatures table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.2 | ColumntemperatureBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.3 | ColumntemperatureBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.4 | ColumntemperatureBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.5 | ColumntemperatureBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.6 | ColumntemperatureCPU1 | read-only | mandatory | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.7 | ColumntemperatureCPU2 | read-only | mandatory | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.8 | ColumntemperatureCPU3 | read-only | mandatory | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.9 | ColumntemperatureCPU4 | read-only | mandatory | The blade CPU temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space for… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.10 | ColumntemperatureDASD1 | read-only | mandatory | The blade DASD temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank space fo… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.11 | ColumnbladeSensorTempCapability | read-only | mandatory | Indicates whether the server blade is IPMI capable or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.12 | ColumnbladeSensor1Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.13 | ColumnbladeSensor2Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.14 | ColumnbladeSensor3Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.15 | ColumnbladeSensor4Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.16 | ColumnbladeSensor5Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.17 | ColumnbladeSensor6Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.18 | ColumnbladeSensor7Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.19 | ColumnbladeSensor8Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.3.1.20 | ColumnbladeSensor9Temp | read-only | mandatory | Temperature reading for an IPMI blade expressed in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4 | TablebladeTemperatureThresholdsTable | not-accessible | mandatory | Table of blade temperature thresholds information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1 | RowbladeTemperatureThresholdsEntry | not-accessible | mandatory | Blade temperature thresholds table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.1 | ColumntemperatureThresholdIndex | read-only | mandatory | Blade temperature threshold table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.2 | ColumntemperatureThresholdBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.3 | ColumntemperatureThresholdBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.4 | ColumntemperatureThresholdBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.5 | ColumntemperatureThresholdBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.6 | ColumntemperatureCPU1HardShutdown | read-only | mandatory | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.7 | ColumntemperatureCPU1Warning | read-only | mandatory | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An oc… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.8 | ColumntemperatureCPU1WarningReset | read-only | mandatory | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been cr… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.9 | ColumntemperatureCPU2HardShutdown | read-only | mandatory | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.10 | ColumntemperatureCPU2Warning | read-only | mandatory | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An oc… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.11 | ColumntemperatureCPU2WarningReset | read-only | mandatory | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been cr… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.12 | ColumntemperatureCPU3HardShutdown | read-only | mandatory | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.13 | ColumntemperatureCPU3Warning | read-only | mandatory | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An oc… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.14 | ColumntemperatureCPU3WarningReset | read-only | mandatory | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been cr… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.15 | ColumntemperatureCPU4HardShutdown | read-only | mandatory | The blade CPU hard shutdown temperature in degrees centigrade(C). If the component's temperature rises above this value the system will be powered off immediat… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.16 | ColumntemperatureCPU4Warning | read-only | mandatory | The blade CPU warning temperature in degrees centigrade(C). If the temperature rises above this value a warning alert/event if enabled will be generated. An oc… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.17 | ColumntemperatureCPU4WarningReset | read-only | mandatory | The blade CPU warning reset temperature in degrees centigrade(C). If the temperature rises above this value and if a warning alert/event had previously been cr… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.18 | ColumntemperatureDASD1HardShutdown | read-only | mandatory | The blade DASD hard shutdown temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.19 | ColumntemperatureDASD1Warning | read-only | mandatory | The blade DASD warning temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or blank … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.20 | ColumntemperatureDASD1WarningReset | read-only | mandatory | The blade DASD warning reset temperature in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for negative or … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.21 | ColumnbladeTempThresholdSensorCapability | read-only | mandatory | Indicates whether the server blade is IPMI capable or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.22 | ColumntemperatureSensor1HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.23 | ColumntemperatureSensor1Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.24 | ColumntemperatureSensor1WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.25 | ColumntemperatureSensor2HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.26 | ColumntemperatureSensor2Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.27 | ColumntemperatureSensor2WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.28 | ColumntemperatureSensor3HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.29 | ColumntemperatureSensor3Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.30 | ColumntemperatureSensor3WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.31 | ColumntemperatureSensor4HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.32 | ColumntemperatureSensor4Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.33 | ColumntemperatureSensor4WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.34 | ColumntemperatureSensor5HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.35 | ColumntemperatureSensor5Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.36 | ColumntemperatureSensor5WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.37 | ColumntemperatureSensor6HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.38 | ColumntemperatureSensor6Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.39 | ColumntemperatureSensor6WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.40 | ColumntemperatureSensor7HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.41 | ColumntemperatureSensor7Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.42 | ColumntemperatureSensor7WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.43 | ColumntemperatureSensor8HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.44 | ColumntemperatureSensor8Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.45 | ColumntemperatureSensor8WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.46 | ColumntemperatureSensor9HardShutdown | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.47 | ColumntemperatureSensor9Warning | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.4.1.48 | ColumntemperatureSensor9WarningReset | read-only | mandatory | The blade hard shutdown temperature for IPMI blades in degrees centigrade(C). An octet string expressed as 'sddd.dd Centigrade' where: s is the sign ('-' for n… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5 | TablebladeVoltagesTable | not-accessible | mandatory | Table of blade voltages information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1 | RowbladeVoltagesEntry | not-accessible | mandatory | Blade voltages table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.1 | ColumnvoltageIndex | read-only | mandatory | Blade voltages table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.2 | ColumnvoltageBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.3 | ColumnvoltageBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.4 | ColumnvoltageBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.5 | ColumnvoltageBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.6 | ColumnbladePlus5Volt | read-only | mandatory | +5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.7 | ColumnbladePlus3pt3Volt | read-only | mandatory | +3.3 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.8 | ColumnbladePlus12Volt | read-only | mandatory | +12 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative o… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.10 | ColumnbladePlus2pt5Volt | read-only | mandatory | +2.5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.11 | ColumnbladePlus1pt5Volt | read-only | mandatory | +1.5 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative … |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.12 | ColumnbladePlus1pt25Volt | read-only | mandatory | +1.25 Volt power supply voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.13 | ColumnbladeVRM1Volt | read-only | mandatory | VRM 1 voltage reading for the blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positi… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.14 | ColumnbladeSensorVoltCapability | read-only | mandatory | Indicates whether the server blade is IPMI capable or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.15 | ColumnbladeSensor1Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.16 | ColumnbladeSensor2Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.17 | ColumnbladeSensor3Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.18 | ColumnbladeSensor4Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.19 | ColumnbladeSensor5Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.20 | ColumnbladeSensor6Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.21 | ColumnbladeSensor7Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.22 | ColumnbladeSensor8Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.23 | ColumnbladeSensor9Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.24 | ColumnbladeSensor10Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.25 | ColumnbladeSensor11Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.26 | ColumnbladeSensor12Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.27 | ColumnbladeSensor13Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.28 | ColumnbladeSensor14Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.29 | ColumnbladeSensor15Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.30 | ColumnbladeSensor16Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.31 | ColumnbladeSensor17Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.32 | ColumnbladeSensor18Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.33 | ColumnbladeSensor19Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.34 | ColumnbladeSensor20Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.35 | ColumnbladeSensor21Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.36 | ColumnbladeSensor22Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.37 | ColumnbladeSensor23Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.38 | ColumnbladeSensor24Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.39 | ColumnbladeSensor25Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.40 | ColumnbladeSensor26Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.41 | ColumnbladeSensor27Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.42 | ColumnbladeSensor28Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.43 | ColumnbladeSensor29Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.5.1.44 | ColumnbladeSensor30Volt | read-only | mandatory | Voltage reading for an IPMI blade expressed in Volts(V). An octet string expressed as 'sdd.dd Volts' where: s is the sign ('-' for negative or '+' for positive… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6 | TablebladeVoltageThresholdsTable | not-accessible | mandatory | Table of blade VoltageThresholds information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1 | RowbladeVoltageThresholdsEntry | not-accessible | mandatory | Blade voltage thresholds table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.1 | ColumnvoltageThresholdIndex | read-only | mandatory | Blade voltage thresholds table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.2 | ColumnvoltageThresholdBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.3 | ColumnvoltageThresholdBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.4 | ColumnvoltageThresholdBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.5 | ColumnvoltageThresholdBladeName | read-write | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.6 | ColumnbladePlus5VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.7 | ColumnbladePlus5VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.8 | ColumnbladePlus3pt3VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.9 | ColumnbladePlus3pt3VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.10 | ColumnbladePlus12VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.11 | ColumnbladePlus12VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.14 | ColumnbladePlus2pt5VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.15 | ColumnbladePlus2pt5VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.16 | ColumnbladePlus1pt5VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.17 | ColumnbladePlus1pt5VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.18 | ColumnbladePlus1pt25VoltHighWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage rises above this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.19 | ColumnbladePlus1pt25VoltLowWarning | read-only | mandatory | Voltage warning threshold reading expressed in Volts(V). If the voltage drops below this value a warning alert/event if enabled will be generated. An octet str… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.22 | ColumnbladeVoltThresholdSensorCapability | read-only | mandatory | Indicates whether the server blade is IPMI capable or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.23 | ColumnbladeSensor1VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.24 | ColumnbladeSensor1VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.25 | ColumnbladeSensor2VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.26 | ColumnbladeSensor2VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.27 | ColumnbladeSensor3VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.28 | ColumnbladeSensor3VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.29 | ColumnbladeSensor4VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.30 | ColumnbladeSensor4VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.31 | ColumnbladeSensor5VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.32 | ColumnbladeSensor5VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.33 | ColumnbladeSensor6VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.34 | ColumnbladeSensor6VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.35 | ColumnbladeSensor7VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.36 | ColumnbladeSensor7VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.37 | ColumnbladeSensor8VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.38 | ColumnbladeSensor8VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.39 | ColumnbladeSensor9VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.40 | ColumnbladeSensor9VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.41 | ColumnbladeSensor10VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.42 | ColumnbladeSensor10VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.43 | ColumnbladeSensor11VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.44 | ColumnbladeSensor11VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.45 | ColumnbladeSensor12VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.46 | ColumnbladeSensor12VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.47 | ColumnbladeSensor13VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.48 | ColumnbladeSensor13VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.49 | ColumnbladeSensor14VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.50 | ColumnbladeSensor14VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.51 | ColumnbladeSensor15VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.52 | ColumnbladeSensor15VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.53 | ColumnbladeSensor16VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.54 | ColumnbladeSensor16VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.55 | ColumnbladeSensor17VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.56 | ColumnbladeSensor17VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.57 | ColumnbladeSensor18VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.58 | ColumnbladeSensor18VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.59 | ColumnbladeSensor19VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.60 | ColumnbladeSensor19VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.61 | ColumnbladeSensor20VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.62 | ColumnbladeSensor20VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.63 | ColumnbladeSensor21VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.64 | ColumnbladeSensor21VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.65 | ColumnbladeSensor22VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.66 | ColumnbladeSensor22VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.67 | ColumnbladeSensor23VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.68 | ColumnbladeSensor23VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.69 | ColumnbladeSensor24VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.70 | ColumnbladeSensor24VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.71 | ColumnbladeSensor25VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.72 | ColumnbladeSensor25VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.73 | ColumnbladeSensor26VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.74 | ColumnbladeSensor26VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.75 | ColumnbladeSensor27VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.76 | ColumnbladeSensor27VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.77 | ColumnbladeSensor28VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.78 | ColumnbladeSensor28VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.79 | ColumnbladeSensor29VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.80 | ColumnbladeSensor29VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.81 | ColumnbladeSensor30VoltHighWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage rises above this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.6.1.82 | ColumnbladeSensor30VoltLowWarning | read-only | mandatory | Voltage warning threshold reading for IPMI blades expressed in Volts(V). If the voltage drops below this value, a critical alert/event if enabled will be gener… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7 | TablebladeIOCompatibilityTable | not-accessible | mandatory | Table of IO Compatibility status for the blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1 | RowbladeIOCompatibilityEntry | not-accessible | mandatory | Blade IO Compatibility Status entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.1 | ColumnbladeIOCompatibilityIndex | read-only | mandatory | The blade I/O compatibility table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.2 | ColumnbladeIOCompatibilityBladeId | read-only | mandatory | The blade numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.3 | ColumnbladeIOCompatibilityBayNumber | read-only | mandatory | The Bay number of the blade or expension card. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.4 | ColumnbladeIOCompatibilityModuleBay | read-only | mandatory | The modules (each one specified by module type and bay number) that the blade can communicate with over the midplane networking fabric (i.e. a physical path ex… |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.5 | ColumnbladeIOCompatibilityModulePower | read-only | mandatory | The power state of the module specified in bladeIOCompatibilityModuleBay. n/a if module not installed. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.6 | ColumnbladeIOCompatibilityModuleFabricType | read-only | mandatory | The fabric type of the module specified in bladeIOCompatibilityModuleBay. |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.7 | ColumnbladeIOCompatibilityFabricOnBlade | read-only | mandatory | The fabric type for this channel on the blade (may be onboard fabric or an expansion card). |
| 1.3.6.1.4.1.2.3.51.2.22.1.5.7.1.8 | ColumnbladeIOCompatibilityStatus | read-only | mandatory | The compatibility status between the blade and the module specified in bladeIOCompatibilityModuleBay. The possible values are: OK: No compatibility issues No I… |
| 1.3.6.1.4.1.2.3.51.2.22.1.6 | NodebladePowerRestart | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1 | TablebladePowerRestartTable | not-accessible | mandatory | Table of blade remote power control information. Contains power on/off enablement status for each blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1 | RowbladePowerRestartEntry | not-accessible | mandatory | Blade power restart table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.1 | ColumnpowerRestartIndex | read-only | mandatory | Blade power restart table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.2 | ColumnpowerRestartBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.3 | ColumnpowerRestartBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.4 | ColumnpowerRestartBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. If the state cannot be determined, the unknown(255) value is returned. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.5 | ColumnpowerRestartBladeHealthState | read-only | mandatory | The system health state for the blade. Unknown: Blade is in an undefined state. Good: Blade is operating normally. Warning: One or more outstanding warnings ex… |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.6 | ColumnpowerRestartBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.7 | ColumnpowerOnOffBlade | read-write | mandatory | Control the power state of a specific blade. Off: Power Off Blade. On: Power On Blade. Softoff: Shut Down OS and Power Off Blade. This operation is not support… |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.8 | ColumnrestartBlade | read-write | mandatory | Restart a blade. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.9 | ColumnrestartBladeSMP | read-write | mandatory | Restart a blade's system management processor. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.10 | ColumnrestartBladeNMI | read-write | mandatory | Issue an NMI to the blade. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.11 | ColumnrestartBladeClearNVRAM | read-write | mandatory | Restart a blade and set NVRAM to default values. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this M… |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.12 | ColumnrestartBladeInvokeDiags | read-write | mandatory | Restart a blade and boot into diagnostic mode. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB… |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.13 | ColumnrestartBladeInvokeDiagsFromDefaultBootList | read-write | mandatory | Restart a blade and boot into diagnostic mode from Default Boot List as defined on the blade. This option is not supported on all blades. NOTE: Value returned … |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.14 | ColumnrestartBladeToSMSBootMenu | read-write | mandatory | Restart a blade to SMS boot menu. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.1.6.1.1.15 | ColumnrestartBladeToUEFIMenu | read-write | mandatory | Restart a blade to UEFI setup menu. This option is not supported on all blades. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7 | NodebladeConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1 | TablebladeConfigurationTable | not-accessible | mandatory | Table of blade remote power control information. Contains power on/off enablement status for each blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1 | RowbladeConfigurationEntry | not-accessible | mandatory | Blade configuration table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.1 | ColumnconfigurationIndex | read-only | mandatory | Blade configuration table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.2 | ColumnconfigurationBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.3 | ColumnconfigurationBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.4 | ColumnconfigurationBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.5 | ColumnconfigurationBladeName | read-write | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.6 | ColumnconfigurationBladecKVM | read-write | mandatory | Enable or disable the concurrent KVM function on specified blade. If concurrent KVM is not supported by the blade, it displays 'notPresent' and the concurrent … |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.7 | ColumnconfigurationBladeActiveBootMode | read-only | mandatory | Indicates the active copy of the firmware from which the blade is booting. NOTE: Some blades do not support the automatic boot recovery. It displays 'notApplic… |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.1.1.8 | ColumnconfigurationBladePendingBootMode | read-write | mandatory | Indicates the copy of the firmware from which the blade will boot after the next reboot. NOTE: Some blades do not support the automatic boot recovery. It displ… |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.2 | NodebladePowerManagementPolicy | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.7.2.1 | Scalarpowerdomain1Oversubscription | read-write | mandatory | Power Management Policy settings for power domain 1. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.2.2 | Scalarpowerdomain2Oversubscription | read-write | mandatory | Power Management Policy settings for power domain 2. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.2.3 | ScalaracousticMode | read-write | mandatory | Acoustic mode setting for thermal conditions |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.2.4 | ScalarnebsMode | read-write | mandatory | NEBS (Network Equipment-Building System) mode setting for thermal conditions. NOTE: This MIB object is for BladeCenter T, HT and TR only. |
| 1.3.6.1.4.1.2.3.51.2.22.1.7.3 | ScalarbladecKVMEnableDisable | read-write | mandatory | Enable or disable cKVM function on all server blades. |
| 1.3.6.1.4.1.2.3.51.2.22.1.8 | ScalarbladeIPAddrRangeStart | read-only | deprecated | This field is used to configure the start of the IP address range for the blade system management processors on the blades. These addresses are used on the int… |
| 1.3.6.1.4.1.2.3.51.2.22.1.9 | NodebladeCapacityOnDemand | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.9.1 | TablebladeCapacityOnDemandTable | not-accessible | deprecated | Table of COD blade. NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1 | RowbladeCapacityOnDemandEntry | not-accessible | deprecated | Blade COD table entry NOTE: This table is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.1 | ColumnbladeCapacityOnDemandIndex | read-only | deprecated | Blade configuration table index. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.2 | ColumnbladeCapacityOnDemandBladeName | read-only | deprecated | The name of the blade as a null terminated string. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.9.1.1.3 | ColumnbladeCapacityOnDemandState | read-write | deprecated | The state of Capacity On Demand. NOTE: This Mib object is deprecated and no longer supported. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10 | NodebladeBootCountPowerOnTime | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1 | TablebladeBootCountPowerOnTimeTable | not-accessible | mandatory | Table per blade of the number of boots for the blade and the number of seconds the blade has been powered on. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1 | RowbladeBootCountPowerOnTimeEntry | not-accessible | mandatory | The number of boots for the blade and the number of seconds the blade has been powered on. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.1 | ColumnbootCountPowerOnTimeBladeIndex | read-only | mandatory | Blade boot count/Power On Time table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.2 | ColumnbootCountPowerOnTimeBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.3 | ColumnbootCountPowerOnTimeBoots | read-write | mandatory | Blade Boot Count. If there is no blade in the given slot then this value is undefined. Writing this value resets the Boot Count to zero. |
| 1.3.6.1.4.1.2.3.51.2.22.1.10.1.1.4 | ColumnbootCountPowerOnTimeSecs | read-write | mandatory | Blade Power On Time in seconds. If there is no blade in the given slot then this value is undefined. Writing this value resets the Power On Time to zero. |
| 1.3.6.1.4.1.2.3.51.2.22.1.11 | ScalarbladeVlanId | read-write | mandatory | This is the virtual LAN ID for the internal management network between the MM and the blade system management processors (BSMPs). The range of valid VLAN ID's … |
| 1.3.6.1.4.1.2.3.51.2.22.1.12 | NodebladeNetworkConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2 | TablebladeNetworkInterfaceTable | not-accessible | mandatory | Table of all blades' network interfaces. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1 | RowbladeNetworkInterfaceEntry | not-accessible | mandatory | Blade configuration table entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.1 | ColumnbladeNetworkInterfaceIndex | read-only | mandatory | Blade Network Interface Table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.2 | ColumnbladeNetworkInterfaceBayNumber | read-only | mandatory | The bay number of the main server blade that supports network interface management |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.3 | ColumnbladeNetworkInterfaceNumber | read-only | mandatory | Indicates which network interface on the blade System Management Processor is be read or writen |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.4 | ColumnbladeNetworkInterfaceType | read-only | mandatory | Indicates blade network interface type. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.5 | ColumnbladeNetworkInterfaceLabel | read-only | mandatory | Show string label that identifies the interface. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.6 | ColumnbladeNetworkInterfaceIPAddr | read-write | mandatory | Show/modify current IP address of the blade network interface. Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInterfaceD… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.7 | ColumnbladeNetworkInterfaceSubnetMask | read-write | mandatory | Show or modifie current subnet mask of the blade network interface. Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInter… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.8 | ColumnbladeNetworkInterfaceGatewayAddr | read-write | mandatory | Show or modify current IP gateway of the blade network interface. Note that only if the bladeNetworkInterfaceEnable is 'enabled(1)' and the bladeNetworkInterfa… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.9 | ColumnbladeNetworkInterfaceVlanId | read-write | mandatory | This is the Virtual LAN ID for supported network interface cards (NICs). The range of valid VLAN ID's is 0 to 4095. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.10 | ColumnbladeNetworkInterfaceVlanEnable | read-only | deprecated | This object is no longer supported and will always be 0 |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.11 | ColumnbladeNetworkInterfaceEnable | read-write | mandatory | Disabled or enabled the blade network interface. If the network interface is disabled, then ignore other configurations. If this network interface doesn't supp… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.12 | ColumnbladeNetworkInterfaceDHCPEnable | read-write | mandatory | IP config method on the blade network interface to modify mode to static IP, dhcp and dhcpthenstatic. If this network interface doesn't support DHCP, show 'not… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.13 | ColumnbladeNetworkInterfaceMACAddr | read-only | mandatory | Show the blade network interface MAC address. If this network interface doesn't support MAC, show 'notApplicable' |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.2.1.14 | ColumnbladeNetworkInterfaceAssignedSwitch | read-write | mandatory | This field allows you to select an I/O Module to use for management traffic to the blade. NOTE: This field is only supported for eth1 of blade. NOTE: You may o… |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10 | NodebladeIPv6Config | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1 | TablebladeIPv6ConfigTable | not-accessible | mandatory | A table of IPv6 configuration options for blades. NOTE: This MIB object is not applicable to blades that do not support IPv6. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1 | RowbladeIPv6ConfigEntry | not-accessible | mandatory | IPv6 configuration options for a blade. NOTE: This MIB object is not applicable to blades that do not support IPv6. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.1 | ColumnbladeIPv6ConfigIndex | read-only | mandatory | The blade's slot number |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.2 | ColumnbladeIPv6ConfigPortIndex | read-only | mandatory | The physical port number of the given entry |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.3 | ColumnbladeIPv6ConfigEnabled | read-write | mandatory | Enables/Disables IPv6 support on the blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.4 | ColumnbladeIPv6ConfigStatic | read-write | mandatory | Enables/Disables IPv6 static configuration support on the blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.5 | ColumnbladeDHCPv6ConfigEnabled | read-write | mandatory | Enables/Disables DHCPv6 address configuration support on the blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.1.1.6 | ColumnbladeIPv6ConfigStatelessEnabled | read-write | mandatory | Enables/Disables IPv6 stateless auto-configuration support on the blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2 | TablebladeIPv6AddressTable | not-accessible | mandatory | A table of assigned IPv6 addresses for blades. NOTE: This MIB object is not applicable to blades that do not support IPv6. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1 | RowbladeIPv6AddressEntry | not-accessible | mandatory | The assigned IPv6 address for a given blade. NOTE: This MIB object is not applicable to blades that do not support IPv6. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.1 | ColumnbladeIPv6AddressIndex | read-only | mandatory | The blade's slot number. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.2 | ColumnbladeIPv6AddressPortIndex | read-only | mandatory | The blade's physical port number for the given entry. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.3 | ColumnbladeIPv6AddressEntryIndex | read-only | mandatory | The blade's address entry index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.4 | ColumnbladeIPv6AddressType | read-only | mandatory | The address type. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.5 | ColumnbladeIPv6Address | read-write | mandatory | The assigned IPv6 address. Note: 'write' is for static ipv6 only. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.6 | ColumnbladeIPv6AddressPrefixLen | read-write | mandatory | The prefix length for the given address. Note: 'write' is for static ipv6 only. |
| 1.3.6.1.4.1.2.3.51.2.22.1.12.10.2.1.7 | ColumnbladeIPv6AddressDefaultRoute | read-write | mandatory | The default route used for the given address. Note: 'write' is for static ipv6 only. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13 | TablebladeBayDataTable | not-accessible | mandatory | Table of blade bay data (BBD) information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1 | RowbladeBayDataEntry | not-accessible | mandatory | Blade bay data (BBD) table entry. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.1 | ColumnbayDataIndex | read-only | mandatory | Blade bay data (BBD) table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.2 | ColumnbayDataBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.3 | ColumnbayDataBladeExists | read-only | mandatory | Indicates whether the server blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.4 | ColumnbayDataBladePowerState | read-only | mandatory | Indicates the power state of the blade specified. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.5 | ColumnbayDataBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.6 | ColumnbayData | read-write | mandatory | A null terminated string that defines the Blade Bay Data (BBD). This data is pushed to the blade's BSMP and SMBIOS structures, where it can used by the blade's… |
| 1.3.6.1.4.1.2.3.51.2.22.1.13.1.7 | ColumnbayDataBladeStatus | read-only | mandatory | This shows Blade Bay Data (BBD) status. 0 means the blade fully supports BBD; 1 means that the blade's BIOS does not support BBD; 2 means that there is no blad… |
| 1.3.6.1.4.1.2.3.51.2.22.1.14 | NodebladeSPEthOverUSBInterface | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1 | TablespEthOverUSBInterfaceTable | not-accessible | mandatory | Table of blade Service Processor's Ethernet over USB interface. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1 | RowspEthOverUSBInterfaceEntry | not-accessible | mandatory | Blade Service Processor's Ethernet over USB interface entry. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1.1 | ColumnspEthOverUSBInterfaceIndex | read-only | mandatory | Service Processor's Ethernet over USB interface table index. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1.2 | ColumnspEthOverUSBInterfaceBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1.3 | ColumnspEthOverUSBInterfaceBladeExists | read-only | mandatory | Indicates whether the blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1.6 | ColumnspEthOverUSBInterfaceBladeName | read-only | mandatory | The name of the blade as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.1.14.1.1.9 | ColumnspEthOverUSBInterfaceEnable | read-write | mandatory | This object allows the user to view the status of, and enable or disable, a blade Service Processor's command interface on Ethernet-over-USB. NOTE: If the blad… |
| 1.3.6.1.4.1.2.3.51.2.22.1.15 | NodebladeManagementNetwork | |||
| 1.3.6.1.4.1.2.3.51.2.22.1.15.1 | ScalarbladeManagementNetworkControlEnable | read-write | mandatory | Globally disable/enable blade management network auto discovery support. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2 | TablebladeManagementNetworkInfoTable | not-accessible | mandatory | Table of blade management network information. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1 | RowbladeManagementNetworkInfoEntry | not-accessible | mandatory | Blade management network information entry. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.1 | ColumnbladeManagementNetworkInfoIndex | read-only | mandatory | Blade management network information table index |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.2 | ColumnbladeManagementNetworkInfoBladeId | read-only | mandatory | The Blade ID. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.3 | ColumnbladeManagementNetworkInfoBladeExist | read-only | mandatory | Indicates whether the blade specified exists or not in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.4 | ColumnbladeManagementNetworkInfoBladeSupport | read-only | mandatory | Indicates whether the blade supports the management network auto discovery capability or not. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.5 | ColumnbladeManagementNetworkInfoPathStatus | read-only | mandatory | Indicates the status of the management network for this blade. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.6 | ColumnbladeManagementNetworkInfoBladeIPAddr | read-only | mandatory | Indicates the blade system management processor IPv4 address. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.7 | ColumnbladeManagementNetworkInfoBladeMACAddr | read-only | mandatory | Indicates the blade system management processor MAC address. |
| 1.3.6.1.4.1.2.3.51.2.22.1.15.2.1.8 | ColumnbladeManagementNetworkInfoSwitchId | read-only | mandatory | Indicates which switch is selected for the blade management network. |
| 1.3.6.1.4.1.2.3.51.2.22.3 | NodeswitchModule | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.1 | NodeswitchModuleControl | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1 | TablesmControlTable | not-accessible | mandatory | Switch module control table. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1 | RowsmControlEntry | not-accessible | mandatory | Switch module control table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.1 | ColumnsmControlIndex | read-only | mandatory | Switch module control table index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.2 | ColumnswitchModuleControlId | read-only | mandatory | The switch module numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.3 | ColumnsmPostResultsAvailable | read-only | mandatory | Describes whether the switch module POST diagnostic result value contained in the smPostResultsValue is valid. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.4 | ColumnsmPostResultsValue | read-only | mandatory | The range of values and meanings are as follows: 0x00 - 0x7F ( 0 - 127) Base internal functions 0x80 - 0x9F (128 - 159) Internal interface failures 0xA0 - 0xAF… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.5 | ColumnswitchModuleMemDiagEnableDisable | read-write | mandatory | Switch module memory diagnostics enabled or disabled. NOTE: The numeric values for the enumerations for enabled and disabled are non-traditional (i.e. - 0 and … |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.6 | ColumnsmCfgCtrlEnableDisable | read-write | mandatory | Switch module configuration control. When set to enabled, only the MM can manage the module. This MIB object can not be set, if AMM grants switch module the Pr… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.7 | ColumnsmExtEthPortsEnableDisable | read-write | mandatory | Switch module external ethernet ports enabled or disabled. This MIB object can not be set, if AMM grants switch module the Protected Mode permission. This MIB … |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.8 | ColumnswitchPingRequest | read-write | deprecated | Sends a ping to a switch module's current IPv4 address. This MIB object can not be set, if AMM grants switch module the Protected Mode permission and switch mo… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.9 | ColumnsmCfgCtrlOnResetEnableDisable | read-write | mandatory | Switch module configuration control on resets (default and unsolicited). When set to enabled, the factory default IP configuration will become active when the … |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.15 | ColumnsmHealthState | read-only | mandatory | The health state for the switch module. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.16 | ColumnsmPMState | read-only | mandatory | The Protected Mode Status for the switch module. standby- Protected Mode capability exists on the IOM but has not been activated on the switch module or the AM… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.17 | ColumnsmPMCtrlEnableDisable | read-write | mandatory | AMM Protected Mode permission for the switch module. disabled - allow AMM to disable Protected Mode Permission for the switch module. enabled - allow AMM to gr… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.1.1.18 | ColumnsmIOCompatibility | read-only | mandatory | The compatibility status for the I/O module. The possible values and their meanings are as follows: Unknown: This indicates a communication error for the I/O m… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2 | TablesmPingTable | not-accessible | mandatory | Allows pinging one of the active assigned addresses of an I/O module. NOTE: This table is not applicable to modules that are running in Stacking Mode and IP co… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2.1 | RowsmPingEntry | not-accessible | mandatory | Represents a single address that can be pinged |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2.1.1 | ColumnsmPingIndex | read-only | mandatory | The switch module's slot number |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2.1.2 | ColumnsmPingAddressEntryIndex | read-only | mandatory | The switch module's address entry index |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2.1.3 | ColumnsmPingAddress | read-only | mandatory | The switch module's IPv4 or IPv6 address |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.2.1.4 | ColumnsmPingAddressExecute | read-write | mandatory | Pings the given IP address. NOTE: The GET operation for this object is meaningless. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7 | TablesmPowerRestartTable | not-accessible | mandatory | Switch module power restart table. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1 | RowsmPowerRestartEntry | not-accessible | mandatory | Switch module power restart table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.1 | ColumnsmPowerRestartIndex | read-only | mandatory | Switch module power restart index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.2 | ColumnsmPowerRestartId | read-only | mandatory | The switch module numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.3 | ColumnsmSwitchExists | read-only | mandatory | Indicates whether the switch module specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.4 | ColumnsmSwitchType | read-only | mandatory | Switch module type. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.5 | ColumnsmMACAddress | read-only | mandatory | Switch module MAC address. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.6 | ColumnsmIPAddress | read-only | mandatory | The switch module current IP address. If the switch module is participating in the Stacking Mode and IP Configuration is protected, then the stack management I… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.7 | ColumnswitchModulePowerOnOff | read-write | mandatory | I/O Module power on or power off. If powering on a currently powered off I/O Module, then the I/O Module will execute a POST. The results of this POST will nee… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.8 | ColumnsmReset | read-write | mandatory | For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause i… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.9 | ColumnsmResetToDefault | read-write | mandatory | For the case where the switch module is currently powered on, this command will effectively power off and then power on the switch module indicated and cause i… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.10 | ColumnsmRestartAndRunStdDiag | read-write | mandatory | To power cycle the selected module(s) and then run the standard diagnostic test package. NOTE: Value returned for the GET command is meaningless for this MIB o… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.11 | ColumnsmRestartAndRunExtDiag | read-write | mandatory | To power cycle the selected module(s) and then run the extended diagnostic test package. This option is not supported on all I/O modules. NOTE: Value returned … |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.12 | ColumnsmRestartAndRunFullDiag | read-write | mandatory | To power cycle the selected module(s) and then run the full diagnostic test package. The full diagnostic test package may take over 5 minutes to run. This opti… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.20 | ColumnsmSwitchSubType | read-only | mandatory | Switch module subtype. NOTE: Some Legacy modules do not support a subtype and will be displayed as unknown. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.21 | ColumnsmSwitchWidth | read-only | mandatory | Switch module width. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.22 | ColumnsmManufacturingID | read-only | mandatory | Switch module hardware VPD manufacturing ID. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.23 | ColumnsmStackingModeState | read-only | mandatory | The Stacking Mode Status for the switch module. standby - I/O module has stacking capability but is not part of a stack. member - I/O module has stacking capab… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.7.1.24 | ColumnsmStackingModeInfo | read-only | mandatory | A string containing a text description about the details of which functions are protected for a switch module when it is in Stacking Mode as Master or Member. … |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10 | TablesmIOCompatibilityTable | not-accessible | mandatory | Switch module control table. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1 | RowsmIOCompatibilityEntry | not-accessible | mandatory | Switch module IO compatibility table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.1 | ColumnsmIOCompatibilityIndex | read-only | mandatory | Switch module IO compatibility index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.2 | ColumnsmIOCompatibilityId | read-only | mandatory | The switch module numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.3 | ColumnsmIOCompatibilityModuleBay | read-only | mandatory | The modules (each one specified by module type and bay number) that this I/O module can communicate with over the midplane networking fabric (i.e. a physical p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.4 | ColumnsmIOCompatibilityModulePower | read-only | mandatory | The power state of the module specified in smIOCompatibilityModuleBay. |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.5 | ColumnsmIOCompatibilityModuleFabricType | read-only | mandatory | The I/O fabric type on the module side for the module. 'n/a' will be displayed if the corresponding channel is not populated on the module side (e.g. we are lo… |
| 1.3.6.1.4.1.2.3.51.2.22.3.1.10.1.6 | ColumnsmIOCompatibilityStatus | read-only | mandatory | The compatibility status for this I/O module and the module specified in smIOCompatibilityModuleBay. The possible values are: OK: No compatibility issues n/a: … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2 | NodeswitchModuleConfig | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1 | NodeswitchMgmtNetworkCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1 | NodeswitchCurrentNwCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1 | TablesmCurrentIPInfoTable | not-accessible | mandatory | Switch module current IP information. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1 | RowsmCurrentIPInfoEntry | not-accessible | mandatory | Switch module current IP table entry. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.1 | ColumnsmCurrentIPInfoIndex | read-only | mandatory | Switch module current IP info index. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.2 | ColumnsmCurrentIPInfoId | read-only | mandatory | The switch module numeric identifier. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.3 | ColumnsmCurrentIPInfoExists | read-only | mandatory | Indicates whether the switch module specified exists or not. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP config… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.4 | ColumnsmCurrentIPInfoPowerState | read-only | mandatory | Indicates whether the I/O Module specified is powered on or not. The value 'shutdownInProgress' is for the I/O Module that may take some time to transition fro… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.6 | ColumnsmCurrentIPAddr | read-only | mandatory | The switch module current IP address. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.7 | ColumnsmCurrentSubnetMask | read-only | mandatory | The switch module current subnet mask. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.8 | ColumnsmCurrentGateway | read-only | mandatory | The switch module current IP gateway. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is protected. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.1.1.1.9 | ColumnsmCurrentIPConfigMethod | read-only | mandatory | The switch module current IP configuration method. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2 | NodeswitchNewNwCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1 | TablesmNewIPInfoTable | not-accessible | mandatory | Switch module new IP information. NOTE: This MIB object is not applicable to modules that are running in Network Address Translation (NAT) Mode or Stacking Mod… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1 | RowsmNewIPInfoEntry | not-accessible | mandatory | Switch module new IP configuration information table entry. NOTE: This MIB table is not applicable to modules that are running in Network Address Translation (… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.1 | ColumnsmNewIPInfoIndex | read-only | mandatory | Switch module new IP info index. NOTE: This MIB object is not applicable to modules that are running in Network Address Translation (NAT) Mode or Stacking Mode… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.2 | ColumnsmNewIPInfoId | read-only | mandatory | The switch module numeric identifier. NOTE: This MIB object is not applicable to modules that are running in Network Address Translation (NAT) Mode or Stacking… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.3 | ColumnsmNewIPInfoExists | read-only | mandatory | Indicates whether the switch module specified exists or not. NOTE: This MIB object is not applicable to modules that are running in Network Address Translation… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.4 | ColumnsmNewIPInfoPowerState | read-only | mandatory | Indicates whether the switch module specified is powered on or not. NOTE: This MIB object is not applicable to modules that are running in Network Address Tran… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.6 | ColumnsmNewIPAddr | read-write | mandatory | The switch module new IP address. Before setting this object to a new value, smNewIpconfigEnableDisable object must first be set to disabled. NOTE: This MIB ob… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.7 | ColumnsmNewSubnetMask | read-write | mandatory | The switch module new subnet mask. Before setting this object to a new value, smNewIpconfigEnableDisable object must first be set to disabled. NOTE: This MIB o… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.8 | ColumnsmNewGateway | read-write | mandatory | The switch module new IP gateway. Before setting this object to a new value, smNewIpconfigEnableDisable object must first be set to disabled. NOTE: This MIB ob… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.9 | ColumnsmNewIPConfigMethod | read-write | mandatory | The switch module new IP configuration method. Before setting this object to a new value, smNewIpconfigEnableDisable object must first be set to disabled. NOTE… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.2.1.1.10 | ColumnsmNewIPConfigEnableDisable | read-write | mandatory | A set command enables a new IP configuration that has been previously defined. A get command indicates whether the new IP configuration information has been en… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3 | NodeswitchNwProtCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1 | NodeswitchNwProtCfgModOne | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1 | TablesmNwProtInfoModOneTable | not-accessible | mandatory | Switch module 1 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1 | RowsmNwProtInfoModOneEntry | not-accessible | mandatory | Switch module 1 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.1 | ColumnsmNwProtInfoModOneIndex | read-only | mandatory | Switch module 1 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.2 | ColumnsmNwProtInfoModOneId | read-only | mandatory | The switch module 1 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.3 | ColumnsmNwProtInfoModOneExists | read-only | mandatory | Indicates whether the switch module 1 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.4 | ColumnsmNwProtInfoModOnePowerState | read-only | mandatory | Indicates whether the switch module 1 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.5 | ColumnsmNwProtInfoModOneProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.6 | ColumnsmNwProtInfoModOneProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.7 | ColumnsmNwProtInfoModOneExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.8 | ColumnsmNwProtInfoModOneIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.1.1.9 | ColumnsmNwProtInfoModOneEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.2 | ScalarsmNwProtInfoModOneActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.1.3 | ScalarsmNwProtInfoModOneReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2 | NodeswitchNwProtCfgModTwo | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1 | TablesmNwProtInfoModTwoTable | not-accessible | mandatory | Switch module 2 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1 | RowsmNwProtInfoModTwoEntry | not-accessible | mandatory | Switch module 2 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.1 | ColumnsmNwProtInfoModTwoIndex | read-only | mandatory | Switch module 2 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.2 | ColumnsmNwProtInfoModTwoId | read-only | mandatory | The switch module 2 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.3 | ColumnsmNwProtInfoModTwoExists | read-only | mandatory | Indicates whether the switch module 2 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.4 | ColumnsmNwProtInfoModTwoPowerState | read-only | mandatory | Indicates whether the switch module 2 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.5 | ColumnsmNwProtInfoModTwoProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.6 | ColumnsmNwProtInfoModTwoProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.7 | ColumnsmNwProtInfoModTwoExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.8 | ColumnsmNwProtInfoModTwoIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.1.1.9 | ColumnsmNwProtInfoModTwoEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.2 | ScalarsmNwProtInfoModTwoActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.2.3 | ScalarsmNwProtInfoModTwoReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3 | NodeswitchNwProtCfgModThree | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1 | TablesmNwProtInfoModThreeTable | not-accessible | mandatory | Switch module 3 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1 | RowsmNwProtInfoModThreeEntry | not-accessible | mandatory | Switch module 3 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.1 | ColumnsmNwProtInfoModThreeIndex | read-only | mandatory | Switch module 3 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.2 | ColumnsmNwProtInfoModThreeId | read-only | mandatory | The switch module 3 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.3 | ColumnsmNwProtInfoModThreeExists | read-only | mandatory | Indicates whether the switch module 3 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.4 | ColumnsmNwProtInfoModThreePowerState | read-only | mandatory | Indicates whether the switch module 3 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.5 | ColumnsmNwProtInfoModThreeProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.6 | ColumnsmNwProtInfoModThreeProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.7 | ColumnsmNwProtInfoModThreeExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.8 | ColumnsmNwProtInfoModThreeIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.1.1.9 | ColumnsmNwProtInfoModThreeEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.2 | ScalarsmNwProtInfoModThreeActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.3.3 | ScalarsmNwProtInfoModThreeReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4 | NodeswitchNwProtCfgModFour | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1 | TablesmNwProtInfoModFourTable | not-accessible | mandatory | Switch module 4 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1 | RowsmNwProtInfoModFourEntry | not-accessible | mandatory | Switch module 3 network protocol (Network Address Translation) configuration information table entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.1 | ColumnsmNwProtInfoModFourIndex | read-only | mandatory | Switch module 4 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.2 | ColumnsmNwProtInfoModFourId | read-only | mandatory | The switch module 4 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.3 | ColumnsmNwProtInfoModFourExists | read-only | mandatory | Indicates whether the switch module 4 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.4 | ColumnsmNwProtInfoModFourPowerState | read-only | mandatory | Indicates whether the switch module 4 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.5 | ColumnsmNwProtInfoModFourProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.6 | ColumnsmNwProtInfoModFourProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.7 | ColumnsmNwProtInfoModFourExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.8 | ColumnsmNwProtInfoModFourIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.1.1.9 | ColumnsmNwProtInfoModFourEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.2 | ScalarsmNwProtInfoModFourActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.4.3 | ScalarsmNwProtInfoModFourReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5 | NodeswitchNwProtCfgModFive | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1 | TablesmNwProtInfoModFiveTable | not-accessible | mandatory | Switch module 5 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1 | RowsmNwProtInfoModFiveEntry | not-accessible | mandatory | Switch module 5 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.1 | ColumnsmNwProtInfoModFiveIndex | read-only | mandatory | Switch module 5 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.2 | ColumnsmNwProtInfoModFiveId | read-only | mandatory | The switch module 5 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.3 | ColumnsmNwProtInfoModFiveExists | read-only | mandatory | Indicates whether the switch module 5 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.4 | ColumnsmNwProtInfoModFivePowerState | read-only | mandatory | Indicates whether the switch module 5 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.5 | ColumnsmNwProtInfoModFiveProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.6 | ColumnsmNwProtInfoModFiveProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.7 | ColumnsmNwProtInfoModFiveExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.8 | ColumnsmNwProtInfoModFiveIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.1.1.9 | ColumnsmNwProtInfoModFiveEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.2 | ScalarsmNwProtInfoModFiveActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.5.3 | ScalarsmNwProtInfoModFiveReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6 | NodeswitchNwProtCfgModSix | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1 | TablesmNwProtInfoModSixTable | not-accessible | mandatory | Switch module 6 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1 | RowsmNwProtInfoModSixEntry | not-accessible | mandatory | Switch module 6 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.1 | ColumnsmNwProtInfoModSixIndex | read-only | mandatory | Switch module 6 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.2 | ColumnsmNwProtInfoModSixId | read-only | mandatory | The switch module 6 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.3 | ColumnsmNwProtInfoModSixExists | read-only | mandatory | Indicates whether the switch module 6 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.4 | ColumnsmNwProtInfoModSixPowerState | read-only | mandatory | Indicates whether the switch module 6 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.5 | ColumnsmNwProtInfoModSixProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.6 | ColumnsmNwProtInfoModSixProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.7 | ColumnsmNwProtInfoModSixExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.8 | ColumnsmNwProtInfoModSixIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.1.1.9 | ColumnsmNwProtInfoModSixEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.2 | ScalarsmNwProtInfoModSixActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.6.3 | ScalarsmNwProtInfoModSixReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7 | NodeswitchNwProtCfgModSeven | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1 | TablesmNwProtInfoModSevenTable | not-accessible | mandatory | Switch module 7 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1 | RowsmNwProtInfoModSevenEntry | not-accessible | mandatory | Switch module 7 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.1 | ColumnsmNwProtInfoModSevenIndex | read-only | mandatory | Switch module 7 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.2 | ColumnsmNwProtInfoModSevenId | read-only | mandatory | The switch module 7 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.3 | ColumnsmNwProtInfoModSevenExists | read-only | mandatory | Indicates whether the switch module 7 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.4 | ColumnsmNwProtInfoModSevenPowerState | read-only | mandatory | Indicates whether the switch module 7 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.5 | ColumnsmNwProtInfoModSevenProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.6 | ColumnsmNwProtInfoModSevenProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.7 | ColumnsmNwProtInfoModSevenExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.8 | ColumnsmNwProtInfoModSevenIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.1.1.9 | ColumnsmNwProtInfoModSevenEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.2 | ScalarsmNwProtInfoModSevenActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.7.3 | ScalarsmNwProtInfoModSevenReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8 | NodeswitchNwProtCfgModEight | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1 | TablesmNwProtInfoModEightTable | not-accessible | mandatory | Switch module 8 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1 | RowsmNwProtInfoModEightEntry | not-accessible | mandatory | Switch module 8 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.1 | ColumnsmNwProtInfoModEightIndex | read-only | mandatory | Switch module 8 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.2 | ColumnsmNwProtInfoModEightId | read-only | mandatory | The switch module 8 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.3 | ColumnsmNwProtInfoModEightExists | read-only | mandatory | Indicates whether the switch module 8 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.4 | ColumnsmNwProtInfoModEightPowerState | read-only | mandatory | Indicates whether the switch module 8 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.5 | ColumnsmNwProtInfoModEightProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.6 | ColumnsmNwProtInfoModEightProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.7 | ColumnsmNwProtInfoModEightExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.8 | ColumnsmNwProtInfoModEightIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.1.1.9 | ColumnsmNwProtInfoModEightEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.2 | ScalarsmNwProtInfoModEightActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.8.3 | ScalarsmNwProtInfoModEightReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9 | NodeswitchNwProtCfgModNine | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1 | TablesmNwProtInfoModNineTable | not-accessible | mandatory | Switch module 9 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1 | RowsmNwProtInfoModNineEntry | not-accessible | mandatory | Switch module 9 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.1 | ColumnsmNwProtInfoModNineIndex | read-only | mandatory | Switch module 9 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.2 | ColumnsmNwProtInfoModNineId | read-only | mandatory | The switch module 9 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.3 | ColumnsmNwProtInfoModNineExists | read-only | mandatory | Indicates whether the switch module 9 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.4 | ColumnsmNwProtInfoModNinePowerState | read-only | mandatory | Indicates whether the switch module 9 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.5 | ColumnsmNwProtInfoModNineProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.6 | ColumnsmNwProtInfoModNineProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.7 | ColumnsmNwProtInfoModNineExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.8 | ColumnsmNwProtInfoModNineIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.1.1.9 | ColumnsmNwProtInfoModNineEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.2 | ScalarsmNwProtInfoModNineActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.9.3 | ScalarsmNwProtInfoModNineReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10 | NodeswitchNwProtCfgModTen | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1 | TablesmNwProtInfoModTenTable | not-accessible | mandatory | Switch module 10 network protocol (Network Address Translation) information. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1 | RowsmNwProtInfoModTenEntry | not-accessible | mandatory | Switch module 10 network protocol (Network Address Translation) configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.1 | ColumnsmNwProtInfoModTenIndex | read-only | mandatory | Switch module 10 network protocol (Network Address Translation) information index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.2 | ColumnsmNwProtInfoModTenId | read-only | mandatory | The switch module 10 numeric identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.3 | ColumnsmNwProtInfoModTenExists | read-only | mandatory | Indicates whether the switch module 10 exists or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.4 | ColumnsmNwProtInfoModTenPowerState | read-only | mandatory | Indicates whether the switch module 10 is powered on or not. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.5 | ColumnsmNwProtInfoModTenProtName | read-write | mandatory | Protocol name |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.6 | ColumnsmNwProtInfoModTenProtID | read-write | mandatory | Protocol ID |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.7 | ColumnsmNwProtInfoModTenExtPort | read-write | mandatory | External port |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.8 | ColumnsmNwProtInfoModTenIntPort | read-write | mandatory | Internal port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.1.1.9 | ColumnsmNwProtInfoModTenEnable | read-write | mandatory | Enable or disable the protocol entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.2 | ScalarsmNwProtInfoModTenActivate | read-write | mandatory | Activate all network protocol settings for the switch module. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.3.10.3 | ScalarsmNwProtInfoModTenReset | read-write | mandatory | Reset all network protocol settings for the switch module to default. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4 | NodeswitchIPv6Config | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1 | TablesmIPv6ConfigTable | not-accessible | mandatory | A table of IPv6 configuration options for switch modules. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configura… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1 | RowsmIPv6ConfigEntry | not-accessible | mandatory | IPv6 configuration options for a switch module.. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration is p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1.1 | ColumnsmIPv6ConfigIndex | read-only | mandatory | The switch module's slot number |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1.2 | ColumnsmIPv6ConfigEnabled | read-write | mandatory | Enables/Disables IPv6 support on the switch module. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1.3 | ColumnsmIPv6ConfigStatic | read-write | mandatory | Enables/Disables IPv6 static configuration support on the switch module. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1.4 | ColumnsmDHCPv6ConfigEnabled | read-write | mandatory | Enables/Disables DHCPv6 address configuration support on the switch module. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.1.1.5 | ColumnsmIPv6ConfigStatelessEnabled | read-write | mandatory | Enables/Disables IPv6 stateless auto-configuration support on the switch module. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2 | TablesmIPv6AddressTable | not-accessible | mandatory | A table of assigned IPv6 addresses for switch modules. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuratio… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1 | RowsmIPv6AddressEntry | not-accessible | mandatory | The assigned IPv6 address for a given switch module NOTE: This MIB object is not applicable to modules that are running in Stacking Mode and IP configuration i… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.1 | ColumnsmIPv6AddressIndex | read-only | mandatory | The switch module's slot number |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.2 | ColumnsmIPv6AddressEntryIndex | read-only | mandatory | The switch module's address entry index |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.3 | ColumnsmIPv6AddressType | read-only | mandatory | The address type. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.4 | ColumnsmIPv6Address | read-only | mandatory | The assigned IPv6 address |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.5 | ColumnsmIPv6AddressPrefixLen | read-only | mandatory | The prefix length for the given address. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.2.1.6 | ColumnsmIPv6AddressDefaultRoute | read-only | mandatory | The default route used for the given address |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3 | TablesmIPv6StaticConfigTable | not-accessible | mandatory | Allows configuration of static IPv6 information for supported IO modules. NOTE: This MIB object is not applicable to modules that are running in Stacking Mode … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1 | RowsmIPv6StaticConfigEntry | not-accessible | mandatory | The static IP address assignment information for an IO module. Once the assignement has taken place the address will show up as a row in the smIPv6AddressTable… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.1 | ColumnsmIPv6StaticIndex | read-only | mandatory | The switch module's slot number |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.2 | ColumnsmIPv6StaticAddress | read-write | mandatory | The assigned IPv6 address. NOTE: If changing with smIPv6StaticAddressPrefixLen and/or smIPv6StaticAddressDefaultRoute sending the update as a single SET comman… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.3 | ColumnsmIPv6StaticAddressPrefixLen | read-write | mandatory | The prefix length for the given address. NOTE: If changing with smIPv6StaticAddress and/or smIPv6StaticAddressDefaultRoute sending the update as a single SET c… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.1.4.3.1.4 | ColumnsmIPv6StaticAddressDefaultRoute | read-write | mandatory | The default route used for the given address NOTE: If changing with smIPv6StaticAddressPrefixLen and/or smIPv6StaticAddress sending the update as a single SET … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2 | NodeswitchPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1 | NodeswitchModOnePortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1 | TablesmOnePortCfgTable | not-accessible | mandatory | Switch Module 1 port configuration information. NOTE: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1 | RowsmOnePortCfgEntry | not-accessible | mandatory | Switch Module 1 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.1 | ColumnsmOnePortCfgIndex | read-only | mandatory | Switch Module 1 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.2 | ColumnsmOnePortCfgLabel | read-only | mandatory | Switch Module 1 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.3 | ColumnsmOnePortCfgType | read-only | mandatory | Switch Module 1 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.4 | ColumnsmOnePortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 1. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.5 | ColumnsmOnePortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 1. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.6 | ColumnsmOnePortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100 Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.7 | ColumnsmOnePortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 1. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.8 | ColumnsmOnePortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 1. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.9 | ColumnsmOnePortCfgMedia | read-only | mandatory | Port media type of Switch Module 1. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.10 | ColumnsmOnePortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 1. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.11 | ColumnsmOnePortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 1. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.12 | ColumnsmOnePortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 1. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.13 | ColumnsmOnePortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.14 | ColumnsmOnePortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.15 | ColumnsmOnePortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.1.1.1.16 | ColumnsmOnePortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2 | NodeswitchModTwoPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1 | TablesmTwoPortCfgTable | not-accessible | mandatory | Switch Module 2 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1 | RowsmTwoPortCfgEntry | not-accessible | mandatory | Switch Module 2 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.1 | ColumnsmTwoPortCfgIndex | read-only | mandatory | Switch Module 2 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.2 | ColumnsmTwoPortCfgLabel | read-only | mandatory | Switch Module 2 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.3 | ColumnsmTwoPortCfgType | read-only | mandatory | Switch Module 2 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.4 | ColumnsmTwoPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 2. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.5 | ColumnsmTwoPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 2. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.6 | ColumnsmTwoPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.7 | ColumnsmTwoPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 2. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.8 | ColumnsmTwoPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 2. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.9 | ColumnsmTwoPortCfgMedia | read-only | mandatory | Port media type of Switch Module 2. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.10 | ColumnsmTwoPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 2. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.11 | ColumnsmTwoPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 2. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.12 | ColumnsmTwoPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 2. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.13 | ColumnsmTwoPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.14 | ColumnsmTwoPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.15 | ColumnsmTwoPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.2.1.1.16 | ColumnsmTwoPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3 | NodeswitchModThreePortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1 | TablesmThreePortCfgTable | not-accessible | mandatory | Switch Module 3 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1 | RowsmThreePortCfgEntry | not-accessible | mandatory | Switch Module 3 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.1 | ColumnsmThreePortCfgIndex | read-only | mandatory | Switch Module 3 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.2 | ColumnsmThreePortCfgLabel | read-only | mandatory | Switch Module 3 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.3 | ColumnsmThreePortCfgType | read-only | mandatory | Switch Module 3 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.4 | ColumnsmThreePortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 3. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.5 | ColumnsmThreePortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 3. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.6 | ColumnsmThreePortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.7 | ColumnsmThreePortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 3. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.8 | ColumnsmThreePortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 3. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.9 | ColumnsmThreePortCfgMedia | read-only | mandatory | Port media type of Switch Module 3. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.10 | ColumnsmThreePortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 3. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.11 | ColumnsmThreePortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 3. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.12 | ColumnsmThreePortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 3. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.13 | ColumnsmThreePortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.14 | ColumnsmThreePortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.15 | ColumnsmThreePortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.3.1.1.16 | ColumnsmThreePortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4 | NodeswitchModFourPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1 | TablesmFourPortCfgTable | not-accessible | mandatory | Switch Module 4 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1 | RowsmFourPortCfgEntry | not-accessible | mandatory | Switch Module 4 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.1 | ColumnsmFourPortCfgIndex | read-only | mandatory | Switch Module 4 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.2 | ColumnsmFourPortCfgLabel | read-only | mandatory | Switch Module 4 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.3 | ColumnsmFourPortCfgType | read-only | mandatory | Switch Module 4 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.4 | ColumnsmFourPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 4. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.5 | ColumnsmFourPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 4. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.6 | ColumnsmFourPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.7 | ColumnsmFourPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 4. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.8 | ColumnsmFourPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 4. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.9 | ColumnsmFourPortCfgMedia | read-only | mandatory | Port media type of Switch Module 4. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.10 | ColumnsmFourPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 4. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.11 | ColumnsmFourPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 4. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.12 | ColumnsmFourPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 4. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.13 | ColumnsmFourPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.14 | ColumnsmFourPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.15 | ColumnsmFourPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.4.1.1.16 | ColumnsmFourPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5 | NodeswitchModFivePortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1 | TablesmFivePortCfgTable | not-accessible | mandatory | Switch Module 5 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1 | RowsmFivePortCfgEntry | not-accessible | mandatory | Switch Module 5 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.1 | ColumnsmFivePortCfgIndex | read-only | mandatory | Switch Module 5 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.2 | ColumnsmFivePortCfgLabel | read-only | mandatory | Switch Module 5 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.3 | ColumnsmFivePortCfgType | read-only | mandatory | Switch Module 5 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.4 | ColumnsmFivePortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 5. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.5 | ColumnsmFivePortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 5. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.6 | ColumnsmFivePortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.7 | ColumnsmFivePortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 5. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.8 | ColumnsmFivePortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 5. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.9 | ColumnsmFivePortCfgMedia | read-only | mandatory | Port media type of Switch Module 5. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.10 | ColumnsmFivePortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 5. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.11 | ColumnsmFivePortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 5. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.12 | ColumnsmFivePortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 5. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.13 | ColumnsmFivePortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.14 | ColumnsmFivePortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.15 | ColumnsmFivePortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.5.1.1.16 | ColumnsmFivePortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6 | NodeswitchModSixPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1 | TablesmSixPortCfgTable | not-accessible | mandatory | Switch Module 6 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1 | RowsmSixPortCfgEntry | not-accessible | mandatory | Switch Module 6 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.1 | ColumnsmSixPortCfgIndex | read-only | mandatory | Switch Module 6 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.2 | ColumnsmSixPortCfgLabel | read-only | mandatory | Switch Module 6 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.3 | ColumnsmSixPortCfgType | read-only | mandatory | Switch Module 6 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.4 | ColumnsmSixPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 6. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.5 | ColumnsmSixPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 6. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.6 | ColumnsmSixPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.7 | ColumnsmSixPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 6. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.8 | ColumnsmSixPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 6. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.9 | ColumnsmSixPortCfgMedia | read-only | mandatory | Port media type of Switch Module 6. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.10 | ColumnsmSixPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 6. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.11 | ColumnsmSixPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 6. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.12 | ColumnsmSixPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 6. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.13 | ColumnsmSixPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.14 | ColumnsmSixPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.15 | ColumnsmSixPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.6.1.1.16 | ColumnsmSixPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7 | NodeswitchModSevenPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1 | TablesmSevenPortCfgTable | not-accessible | mandatory | Switch Module 7 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1 | RowsmSevenPortCfgEntry | not-accessible | mandatory | Switch Module 7 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.1 | ColumnsmSevenPortCfgIndex | read-only | mandatory | Switch Module 7 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.2 | ColumnsmSevenPortCfgLabel | read-only | mandatory | Switch Module 7 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.3 | ColumnsmSevenPortCfgType | read-only | mandatory | Switch Module 7 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.4 | ColumnsmSevenPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 7. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.5 | ColumnsmSevenPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 7. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.6 | ColumnsmSevenPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.7 | ColumnsmSevenPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 7. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.8 | ColumnsmSevenPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 7. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.9 | ColumnsmSevenPortCfgMedia | read-only | mandatory | Port media type of Switch Module 7. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.10 | ColumnsmSevenPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 7. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.11 | ColumnsmSevenPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 7. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.12 | ColumnsmSevenPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 7. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.13 | ColumnsmSevenPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.14 | ColumnsmSevenPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.15 | ColumnsmSevenPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.7.1.1.16 | ColumnsmSevenPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8 | NodeswitchModEightPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1 | TablesmEightPortCfgTable | not-accessible | mandatory | Switch Module 8 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1 | RowsmEightPortCfgEntry | not-accessible | mandatory | Switch Module 8 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.1 | ColumnsmEightPortCfgIndex | read-only | mandatory | Switch Module 8 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.2 | ColumnsmEightPortCfgLabel | read-only | mandatory | Switch Module 8 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.3 | ColumnsmEightPortCfgType | read-only | mandatory | Switch Module 8 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.4 | ColumnsmEightPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 8. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.5 | ColumnsmEightPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 8. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.6 | ColumnsmEightPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.7 | ColumnsmEightPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 8. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.8 | ColumnsmEightPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 8. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.9 | ColumnsmEightPortCfgMedia | read-only | mandatory | Port media type of Switch Module 8. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.10 | ColumnsmEightPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 8. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.11 | ColumnsmEightPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 8. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.12 | ColumnsmEightPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 8. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.13 | ColumnsmEightPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.14 | ColumnsmEightPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.15 | ColumnsmEightPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.8.1.1.16 | ColumnsmEightPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9 | NodeswitchModNinePortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1 | TablesmNinePortCfgTable | not-accessible | mandatory | Switch Module 9 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1 | RowsmNinePortCfgEntry | not-accessible | mandatory | Switch Module 9 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.1 | ColumnsmNinePortCfgIndex | read-only | mandatory | Switch Module 9 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.2 | ColumnsmNinePortCfgLabel | read-only | mandatory | Switch Module 9 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.3 | ColumnsmNinePortCfgType | read-only | mandatory | Switch Module 9 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.4 | ColumnsmNinePortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 9. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.5 | ColumnsmNinePortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 9. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.6 | ColumnsmNinePortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.7 | ColumnsmNinePortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 9. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.8 | ColumnsmNinePortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 9. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.9 | ColumnsmNinePortCfgMedia | read-only | mandatory | Port media type of Switch Module 9. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.10 | ColumnsmNinePortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 9. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.11 | ColumnsmNinePortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 9. A value of 0 indicates this field is not applicable to the switch p… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.12 | ColumnsmNinePortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 9. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.13 | ColumnsmNinePortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.14 | ColumnsmNinePortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.15 | ColumnsmNinePortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.9.1.1.16 | ColumnsmNinePortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10 | NodeswitchModTenPortCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1 | TablesmTenPortCfgTable | not-accessible | mandatory | Switch Module 10 port configuration information. Note: This option is not supported on all I/O modules. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1 | RowsmTenPortCfgEntry | not-accessible | mandatory | Switch Module 10 port configuration information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.1 | ColumnsmTenPortCfgIndex | read-only | mandatory | Switch Module 10 port sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.2 | ColumnsmTenPortCfgLabel | read-only | mandatory | Switch Module 10 port label |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.3 | ColumnsmTenPortCfgType | read-only | mandatory | Switch Module 10 port type: External port: This port is connected to external device and is for data traffic. External management port: This port is solely for… |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.4 | ColumnsmTenPortCfgLinkSetting | read-write | mandatory | Current port link setting for Switch Module 10. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.5 | ColumnsmTenPortCfgLinkState | read-only | mandatory | Current port link state of Switch Module 10. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.6 | ColumnsmTenPortCfgSpeedSetting | read-write | mandatory | Set the port speed using the data rate and duplex value. For examples: 100mf: 100Mbps in Half Duplex; 10gf: 10 Gbps in Full Duplex; auto: The working speed of … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.7 | ColumnsmTenPortCfgSpeedStatus | read-only | mandatory | Current port speed of Switch Module 10. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.8 | ColumnsmTenPortCfgAvailSpeeds | read-only | mandatory | Available speed setting per port for Switch Module 10. If there is more than one setting, the speeds are separated by a comma and then a space. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.9 | ColumnsmTenPortCfgMedia | read-only | mandatory | Port media type of Switch Module 10. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.10 | ColumnsmTenPortCfgProtocol | read-only | mandatory | Port protocol of Switch Module 10. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.11 | ColumnsmTenPortCfgWidth | read-only | mandatory | The width of the port in terms of how many combined cables are present for Switch Module 10. A value of 0 indicates this field is not applicable to the switch … |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.12 | ColumnsmTenPortCfgCableLength | read-only | mandatory | The length (in meters) of the cable supported by this port for Switch Module 10. A value of 0 indicates this field is not applicable to the switch ports. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.13 | ColumnsmTenPortCfgCableType | read-only | mandatory | External cable type for this port, for example, active copper or passive fiber. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.14 | ColumnsmTenPortCfgVendorName | read-only | mandatory | The cable manufacturer. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.15 | ColumnsmTenPortCfgCompatibility | read-only | mandatory | Compatibility of the external cable that is plugged into the port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.2.2.10.1.1.16 | ColumnsmTenPortCfgDataRate | read-only | mandatory | Data rate supported for this port. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3 | NoderaidControllerConfig | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1 | TableraidControllerTable | not-accessible | mandatory | RAID Controller control table. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1 | RowraidControllerEntry | not-accessible | mandatory | RAID Controller control table entry. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.1 | ColumnraidControllerIndex | read-only | mandatory | RAID Controller control table index. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.2 | ColumnraidControllerId | read-only | mandatory | The I/O Module numeric identifier for the SAS Controller Module. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.3 | ColumnraidControllerExists | read-only | mandatory | Indicates whether the I/O Module specified for the RAID Controller exists or not. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.4 | ColumnraidControllerPowerState | read-only | mandatory | Indicates whether the I/O Module is powered on or not. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.5 | ColumnraidControllerMACAddress | read-only | mandatory | The MAC address for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.6 | ColumnraidControllerSasID | read-only | mandatory | The hardware VPD SAS ID for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.1.1.7 | ColumnraidControllerPingRequest | read-write | mandatory | Sends a ping to the current IP address of the RAID Controller network interface. This MIB object can not be set, if AMM grants I/O Module the Protected Mode pe… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2 | NoderaidControllerNetworkCfg | |||
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1 | TablercCurrentIPInfoTable | not-accessible | mandatory | RAID Controller current IP table. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1 | RowrcCurrentIPInfoEntry | not-accessible | mandatory | RAID Controller current IP table entry. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.1 | ColumnrcCurrentIPInfoIndex | read-only | mandatory | RAID Controller current IP table index. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.2 | ColumnrcCurrentIPInfoId | read-only | mandatory | The I/O Module numeric identifier for the RAID Controller. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.3 | ColumnrcCurrentIPInfoExists | read-only | mandatory | Indicates whether the I/O Module exists or not. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.4 | ColumnrcCurrentIPInfoPowerState | read-only | mandatory | Indicates whether the I/O Module is powered on or not. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.5 | ColumnrcCurrentIPAddr | read-only | mandatory | The current IP address for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.6 | ColumnrcCurrentSubnetMask | read-only | mandatory | The current subnet mask for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.7 | ColumnrcCurrentGateway | read-only | mandatory | The current subnet mask for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.8 | ColumnrcCurrentIPConfigMethod | read-only | mandatory | The current IP gateway for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.1.1.9 | ColumnrcCurrentRaidedVlanId | read-only | mandatory | The current virtual LAN ID for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2 | TablercNewIPInfoTable | not-accessible | mandatory | RAID Controller new IP configuration table. This MIB object is for SAS Controller Modules only. NOTE: This MIB object is not applicable to modules that are run… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1 | RowrcNewIPInfoEntry | not-accessible | mandatory | RAID Controller new IP configuration information table entry. This MIB object is for SAS Controller Modules only. NOTE: This MIB table is not applicable to mod… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.1 | ColumnrcNewIPInfoIndex | read-only | mandatory | RAID Controller new IP configuration information index. This MIB object is for SAS Controller Modules only. NOTE: This MIB object is not applicable to modules … |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.2 | ColumnrcNewIPInfoId | read-only | mandatory | The I/O Module numeric identifier for the RAID Controller. This MIB object is for SAS Controller Modules only. NOTE: This MIB object is not applicable to modul… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.3 | ColumnrcNewIPInfoExists | read-only | mandatory | Indicates whether the I/O Module exists or not. This MIB object is for SAS Controller Modules only. NOTE: This MIB object is not applicable to modules that are… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.4 | ColumnrcNewIPInfoPowerState | read-only | mandatory | Indicates whether the I/O Module is powered on or not. This MIB object is for SAS Controller Modules only. NOTE: This MIB object is not applicable to modules t… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.5 | ColumnrcNewIPAddr | read-write | mandatory | The new IP address for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. Before setting this object to a new value, rc… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.6 | ColumnrcNewSubnetMask | read-write | mandatory | The new subnet mask for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. Before setting this object to a new value, r… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.7 | ColumnrcNewGateway | read-write | mandatory | The new IP gateway for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. Before setting this object to a new value, rc… |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.8 | ColumnrcNewIPConfigMethod | read-write | mandatory | The new IP configuration method for the RAID Controller network interface. This MIB object is for SAS Controller Modules only. Before setting this object to a … |
| 1.3.6.1.4.1.2.3.51.2.22.3.3.2.2.1.11 | ColumnrcNewIPConfigEnableDisable | read-write | mandatory | A set command enables new IP configurations that have been defined. A get command indicates whether new IP configurations that have been enabled. NOTE: This MI… |
| 1.3.6.1.4.1.2.3.51.2.22.4 | NodechassisTopology | |||
| 1.3.6.1.4.1.2.3.51.2.22.4.1 | ScalarchassisResponseVersion | read-only | mandatory | Chassis response version. |
| 1.3.6.1.4.1.2.3.51.2.22.4.2 | ScalarchassisFlags | read-only | mandatory | Chassis flags. 1 = a server blade chassis, 0 = a rack or standalone chassis. |
| 1.3.6.1.4.1.2.3.51.2.22.4.3 | ScalarchassisName | read-only | mandatory | The name of the active MM as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.4.18 | ScalarchassisNoOfFPsSupported | read-only | mandatory | Number of fan packs (FPs) supported. NOTE: Fan packs are also referred to as Power Module Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.22.4.19 | ScalarchassisNoOfPBsSupported | read-only | mandatory | Number of processor blades (PBs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.20 | ScalarchassisNoOfSMsSupported | read-only | mandatory | Number of switch modules (SMs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.21 | ScalarchassisNoOfMMsSupported | read-only | mandatory | Number of management modules (MMs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.22 | ScalarchassisNoOfPMsSupported | read-only | mandatory | Number of power modules (PMs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.23 | ScalarchassisNoOfMTsSupported | read-only | mandatory | Number of media trays (MTs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.24 | ScalarchassisNoOfBlowersSupported | read-only | mandatory | Number of blowers supported. NOTE: Blowers are also referred to as Chassis Cooling Devices. |
| 1.3.6.1.4.1.2.3.51.2.22.4.25 | ScalarchassisPBsInstalled | read-only | mandatory | The blades that are installed on the chassis. The blades are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as the… |
| 1.3.6.1.4.1.2.3.51.2.22.4.29 | ScalarchassisSMsInstalled | read-only | mandatory | The switch modules that are installed on the chassis. The switch modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that i… |
| 1.3.6.1.4.1.2.3.51.2.22.4.30 | ScalarchassisMMsInstalled | read-only | mandatory | The management modules that are installed on the chassis. The management modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0'… |
| 1.3.6.1.4.1.2.3.51.2.22.4.31 | ScalarchassisPMsInstalled | read-only | mandatory | The power modules that are installed on the chassis. The power modules are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is … |
| 1.3.6.1.4.1.2.3.51.2.22.4.32 | ScalarchassisMTInstalled | read-only | mandatory | Indicates whether at least one media tray (MT) is installed. |
| 1.3.6.1.4.1.2.3.51.2.22.4.33 | ScalarchassisBlowersInstalled | read-only | mandatory | The blowers that are installed on the chassis. The blowers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long as t… |
| 1.3.6.1.4.1.2.3.51.2.22.4.34 | ScalarchassisActiveMM | read-only | mandatory | The active management module (MM). |
| 1.3.6.1.4.1.2.3.51.2.22.4.35 | ScalarchassisKVMOwner | read-only | mandatory | The blade that currently owns the keyboard/video/monitor (KVM). 0 = the KVM devices are owned by the management module. |
| 1.3.6.1.4.1.2.3.51.2.22.4.36 | ScalarchassisMediaTrayOwner | read-only | mandatory | The blade that currently owns the media tray. 0 = the media tray is owned by the management module. |
| 1.3.6.1.4.1.2.3.51.2.22.4.37 | ScalarchassisFPsInstalled | read-only | mandatory | The fan packs that are installed on the chassis. The fan packs are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as long … |
| 1.3.6.1.4.1.2.3.51.2.22.4.38 | ScalarchassisType | read-only | mandatory | The type of the chassis. The BladeCenterS chassis and BladeCenterE are part of the bladeCenterOrBladeCenterH type. This MIB object should be used in conjunctio… |
| 1.3.6.1.4.1.2.3.51.2.22.4.39 | ScalarchassisSubtype | read-only | mandatory | The subtype of the chassis. This MIB object should be used in conjunction with chassisType MIB object to determine the characteristic of the chassis. |
| 1.3.6.1.4.1.2.3.51.2.22.4.40 | ScalarchassisNoOfFBsSupported | read-only | mandatory | Number of Front Bezel (FBs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.41 | ScalarchassisNoOfAPsSupported | read-only | mandatory | Number of Alarm Panel (APs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.42 | ScalarchassisNoOfNCsSupported | read-only | deprecated | Number of Network Clocks (NCs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.43 | ScalarchassisNoOfMXsSupported | read-only | mandatory | Number of Multiplexer Expansion modules (MXs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.44 | ScalarchassisNoOfMMIsSupported | read-only | mandatory | Number of management module interposers (MMIs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.45 | ScalarchassisNoOfSMIsSupported | read-only | mandatory | Number of switch module interposers (SMIs) supported. |
| 1.3.6.1.4.1.2.3.51.2.22.4.46 | ScalarchassisNoOfFBsInstalled | read-only | mandatory | The return value of '1'indicates the front bezel is installed on the chassis. The value of '0' indicates the front bezel is not installed. |
| 1.3.6.1.4.1.2.3.51.2.22.4.47 | ScalarchassisNoOfAPsInstalled | read-only | mandatory | The return value of '1'indicates the alarm panel is installed on the chassis. The value of '0' indicates the alarm panel is not installed. |
| 1.3.6.1.4.1.2.3.51.2.22.4.48 | ScalarchassisNoOfNCsInstalled | read-only | deprecated | The network clock cards that are installed on the chassis. The network clock cards are listed as a bitmap. The bitmap is a string containing a list of 1's and … |
| 1.3.6.1.4.1.2.3.51.2.22.4.49 | ScalarchassisNoOfMXsInstalled | read-only | mandatory | The Multiplexer Expansion Modules that are installed on the chassis. The Multiplexer Expansion Modules are listed as a bitmap. The bitmap is a string containin… |
| 1.3.6.1.4.1.2.3.51.2.22.4.50 | ScalarchassisNoOfMMIsInstalled | read-only | mandatory | The flex cables that are installed on the chassis. The flex cables are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as l… |
| 1.3.6.1.4.1.2.3.51.2.22.4.51 | ScalarchassisNoOfSMIsInstalled | read-only | mandatory | The interposers that are installed on the chassis. The interposers are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as l… |
| 1.3.6.1.4.1.2.3.51.2.22.4.52 | ScalarchassisNoOfMTsInstalled | read-only | mandatory | The media trays that are installed on the chassis. The media trays are listed as a bitmap. The bitmap is a string containing a list of 1's and 0's that is as l… |
| 1.3.6.1.4.1.2.3.51.2.22.5 | NodemanagementModule | |||
| 1.3.6.1.4.1.2.3.51.2.22.5.1 | TablemmStatusTable | not-accessible | mandatory | Table of the management module status. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1 | RowmmStatusEntry | not-accessible | mandatory | Management module status entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1.1 | ColumnmmStatusIndex | read-only | mandatory | Management module status index. |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1.2 | ColumnmmPresent | read-only | mandatory | Management module current status. |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1.3 | ColumnmmExtIpAddress | read-only | mandatory | Management module external IP address. NOTE: The IPv6 addresses assigned to the AMM may be viewed with the extEthernetInterfaceIPv6 objects |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1.4 | ColumnmmPrimary | read-only | mandatory | Indicates if this Management module is a primary or not. NOTE: If there is no standby MM, this value defaults to primary. |
| 1.3.6.1.4.1.2.3.51.2.22.5.1.1.5 | ColumnmmHealthState | read-only | mandatory | The health state for the management module. 0 = unknown, 1 = good, 2 = warning, 3 = bad. |
| 1.3.6.1.4.1.2.3.51.2.22.6 | Nodestorage | |||
| 1.3.6.1.4.1.2.3.51.2.22.6.1 | NodestorageStatus | |||
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1 | TablestorageStatusTable | not-accessible | mandatory | Table of the storage module status. For consistent results, view as a table and not as individual entries. NOTE: This MIB object is for BCS only. |
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1.1 | RowstorageStatusEntry | not-accessible | mandatory | Storage Module Status Table Entry. |
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1.1.1 | ColumnstorageStatusIndex | read-only | mandatory | Storage device status table index. |
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1.1.2 | ColumnstorageBayNumber | read-only | mandatory | Bay number of the Storage device. |
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1.1.3 | ColumnstorageState | read-only | mandatory | Storage device state. |
| 1.3.6.1.4.1.2.3.51.2.22.6.1.1.1.4 | ColumnstorageName | read-only | mandatory | The name of the storage device. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2 | NodestorageConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1 | NodestorageSwitchConfiguration | |||
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1 | TablestorageSwitchZoneCfgTable | not-accessible | mandatory | Table of all the zone configurations stored on switch modules. For consistent results, view as a table and not as individual entries. Before activating a new z… |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1 | RowstorageSwitchZoneCfgEntry | not-accessible | mandatory | Switch Module Zone Configuration Management Entry. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.1 | ColumnswitchZoneCfgIndex | read-only | mandatory | Switch module zone configuration table index. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.2 | ColumnswitchZoneCfgBayNumber | read-only | mandatory | The numeric switch bay number. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.3 | ColumnswitchZoneCfgNumber | read-only | mandatory | The zone configuration number, also referred to as the configuration store number. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.4 | ColumnswitchZoneCfgStatus | read-only | mandatory | The status of the zone configuration. Only one configuration is 'Active', others are in 'nonActive' status. When a zone configuration is active on a switch, th… |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.5 | ColumnswitchZoneCfgType | read-only | mandatory | The type of the zone configuration. Predefined are read-only static configurations, and userdefined are read-write configurations that can be created and modif… |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.6 | ColumnswitchZoneCfgName | read-only | mandatory | A short descriptive name for the zone configuration. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.7 | ColumnswitchZoneCfgDescription | read-only | mandatory | A detailed description for the zone configuration. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.8 | ColumnswitchZoneCfgDate | read-only | mandatory | The date the zone configuration was created. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.1.1.9 | ColumnswitchActiveZoneCfg | read-write | mandatory | An object used to activate a particular zone configuration. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2 | TablestorageSwitchActiveZoneCfgTable | not-accessible | mandatory | Table showing the zone configuration that is currently active on a given switch module. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2.1 | RowstorageSwitchActiveZoneCfgEntry | not-accessible | mandatory | Active zone configurations Entry. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2.1.1 | ColumnactiveZoneCfgIndex | read-only | mandatory | Active zone configurations table index. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2.1.2 | ColumnactiveZoneCfgBayNumber | read-only | mandatory | Bay number of the switch module where active zone configurations exist. |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2.1.3 | ColumnactiveZoneCfgNumberBySwitch | read-only | mandatory | The zone configuration number active on this SAS switch module as reported by the switch module. If this number differs from the value of the activeZoneCfgNumb… |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.2.1.4 | ColumnactiveZoneCfgNumberByMM | read-only | mandatory | The zone configuration number active on this SAS switch module as known by the management module. If this number differs from the value of the activeZoneCfgNum… |
| 1.3.6.1.4.1.2.3.51.2.22.6.2.1.3 | ScalarswitchZoneCfgActivation | read-write | mandatory | This object provides a quick means of activating a valid zone configuration on all active SAS switches. The zone configuration to be activated is specified as … |
| 1.3.6.1.4.1.2.3.51.2.22.8 | NodefirmwareInformation | |||
| 1.3.6.1.4.1.2.3.51.2.22.8.1 | NodesmFirmwareInformation | |||
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1 | TablesmFirmwareInfoTable | not-accessible | mandatory | Switch Module firmware image information. This table is only applicable to modules that support multiple images |
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1.1 | RowsmFirmwareInfoEntry | not-accessible | mandatory | Switch Module firmware image information table entry |
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1.1.1 | ColumnsmFirmwareInfoIndex | read-only | mandatory | Sequence index in the firmware table. |
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1.1.2 | ColumnsmFirmwareInfoModIndex | read-only | mandatory | Switch Module number. |
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1.1.3 | ColumnsmFirmwareInfoImageIndex | read-only | mandatory | Switch Module firmware image index. |
| 1.3.6.1.4.1.2.3.51.2.22.8.1.1.1.4 | ColumnsmFirmwareInfoImageName | read-write | mandatory | Switch Module firmware image name |
| 1.3.6.1.4.1.2.3.51.2.22.9 | NodefirmwareUpdate | |||
| 1.3.6.1.4.1.2.3.51.2.22.9.1 | ScalarfirmwareUpdateTarget | read-write | mandatory | Target module whose firmware will be updated. NOTE: Some switch modules do not allow firmware update. When firmware update is attempted on those switch modules… |
| 1.3.6.1.4.1.2.3.51.2.22.9.2 | ScalarfirmwareUpdateTftpServer | read-write | mandatory | If flashing via the legacy method using a tftp server, then set the IP address or host name of the TFTP server where the firmware file resides. The address mus… |
| 1.3.6.1.4.1.2.3.51.2.22.9.3 | ScalarfirmwareUpdateFileName | read-write | mandatory | File name of the firmware file. |
| 1.3.6.1.4.1.2.3.51.2.22.9.4 | ScalarfirmwareUpdateStart | read-write | mandatory | Start updating the firmware of the specified target module. Using execute or execute-with-reboot will cause the SNMP client to wait for the firmware update to … |
| 1.3.6.1.4.1.2.3.51.2.22.9.5 | ScalarfirmwareUpdateStatus | read-only | mandatory | Get the status of the last firmware update which was initiated through SNMP method. |
| 1.3.6.1.4.1.2.3.51.2.22.9.6 | ScalarstandbyFirmwareUpdateStatus | read-only | mandatory | Get the current status of the firmware update for the standby AMM. NOTE: This only applies to systems with a standby AMM. |
| 1.3.6.1.4.1.2.3.51.2.22.9.7 | ScalarfirmwareImageNumber | read-write | mandatory | If the module can upload more than one image, an image number must be specified after setting the firmware target. Please refer to the firmwareInformation sect… |
| 1.3.6.1.4.1.2.3.51.2.22.9.8 | ScalarfirmwareActiveImage | read-write | mandatory | If the module can upload more than one image, an active image number must be specified. Please refer to the firmwareInformation section. NOTE: Value returned f… |
| 1.3.6.1.4.1.2.3.51.2.22.9.9 | ScalarfirmwareUpdateServer | read-write | mandatory | Contains the fully qualified remote location of the firmware packet file. Use firmwareUpdateFileName to specify the filename. A fully qualified remote location… |
| 1.3.6.1.4.1.2.3.51.2.22.10 | NoderemoteChassis | |||
| 1.3.6.1.4.1.2.3.51.2.22.10.1 | TableremoteChassisTable | not-accessible | mandatory | Table of remote chassis information. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1 | RowremoteChassisEntry | not-accessible | mandatory | Remote chassis entry |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.1 | ColumnremoteChassisIndex | read-only | mandatory | Remote chassis discovery sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.2 | ColumnsystemName | read-only | mandatory | System name for this discovery management module. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.3 | ColumnsystemStatus | read-only | mandatory | System status summary (chassis). |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.4 | ColumnmmType | read-only | mandatory | Service processor type. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.5 | ColumnmmSerial | read-only | mandatory | Management module serial number. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.6 | ColumnmmFru | read-only | mandatory | Management module Field-Replaceable number. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.7 | ColumnmmIp | read-write | mandatory | The IPv4 compliant address of the management module. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.8 | ColumnchassisSerial | read-only | mandatory | Chassis serial number. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.9 | ColumnchassisFru | read-only | mandatory | Chassis Field-Replaceable number. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.10 | ColumnchassisMachineTypeMode | read-only | mandatory | Chassis machine type and model number. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.11 | ColumnchassisUuid | read-only | mandatory | Chassis unique identifier. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.12 | ColumnfirmwareVersion | read-only | mandatory | Firmware version of the discovery management module. |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.13 | ColumnipStatus | read-only | mandatory | A flag to state if IPv4 and IPv6 are enabled |
| 1.3.6.1.4.1.2.3.51.2.22.10.1.1.14 | Columnipv6Addresses | read-only | mandatory | The IPv6 addresses configured for the chassis. |
| 1.3.6.1.4.1.2.3.51.2.22.10.2 | ScalarchassisDiscovery | read-write | mandatory | Discovery of remote Chassis. NOTE: Value returned for the GET command is meaningless for this MIB object. |
| 1.3.6.1.4.1.2.3.51.2.22.11 | NodefileManagement | |||
| 1.3.6.1.4.1.2.3.51.2.22.11.1 | NodefileTopology | |||
| 1.3.6.1.4.1.2.3.51.2.22.11.1.1 | ScalarcurrentDirectory | read-write | mandatory | Specifies the directory name for listing the requested files. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2 | TablefileDetailsTable | not-accessible | mandatory | A table of all the files in the specified directory. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2.1 | RowfileDetailsEntry | not-accessible | mandatory | File details entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2.1.1 | ColumnfileIndex | read-only | mandatory | File sequence index. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2.1.2 | ColumnfileName | read-only | mandatory | File name. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2.1.3 | ColumnfileLastUpdate | read-only | mandatory | Date of the latest file update. |
| 1.3.6.1.4.1.2.3.51.2.22.11.1.2.1.4 | ColumnfileSize | read-only | mandatory | File size in bytes. |
| 1.3.6.1.4.1.2.3.51.2.22.11.3 | ScalarfileManagementCmd | read-write | mandatory | This field will execute the selected operations on the files. The following operation is supported: DEL name - delete a file Examples: - to delete the file nam… |
| 1.3.6.1.4.1.2.3.51.2.22.11.6 | ScalarfileSystemSpaceAvailable | read-only | mandatory | This field displays the available space of the AMM file system. |
| 1.3.6.1.4.1.2.3.51.2.22.37 | NodecomponentMonitors | |||
| 1.3.6.1.4.1.2.3.51.2.22.37.11 | TablecomponentMACAddressTable | not-accessible | mandatory | Table of MAC address VPD information for each component. |
| 1.3.6.1.4.1.2.3.51.2.22.37.11.1 | RowcomponentMACAddressEntry | not-accessible | mandatory | Component MAC address table entry |
| 1.3.6.1.4.1.2.3.51.2.22.37.11.1.1 | ColumncomponentMACAddressTopologyPath | read-only | mandatory | The unique identifier for a component in this table. The chassis and each installed component is represented by a hardware topology tree, where each node in th… |
| 1.3.6.1.4.1.2.3.51.2.22.37.11.1.2 | ColumncomponentMACAddressIndex | read-only | mandatory | Each component may have one or more MAC address VPD values associated with it, and this index object identifies the particular instance. |
| 1.3.6.1.4.1.2.3.51.2.22.37.11.1.3 | ColumncomponentMACAddressName | read-only | mandatory | The name of the component as a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.22.37.11.1.4 | ColumncomponentMACAddress | read-only | mandatory | The MAC address VPD value for this component and index. The value is a null terminated string. |
| 1.3.6.1.4.1.2.3.51.2.23 | Nodeservice | |||
| 1.3.6.1.4.1.2.3.51.2.23.1 | NodeserviceConfig | |||
| 1.3.6.1.4.1.2.3.51.2.23.1.3 | ScalardebugEnable | read-write | deprecated | Disable/Enable AMM debugging with USB key by service personnel. |
| 1.3.6.1.4.1.2.3.51.2.23.3 | NodebladeServiceData | |||
| 1.3.6.1.4.1.2.3.51.2.23.3.1 | TablebladeServiceDataTable | not-accessible | mandatory | Table of blade service data information. |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1 | RowbladeServiceDataEntry | not-accessible | mandatory | Blade service data entry |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.1 | ColumnserviceDataIndex | read-only | mandatory | Blade service date index. |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.2 | ColumnserviceDataBladeId | read-only | mandatory | The numeric blade ID. |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.3 | ColumnserviceDataBladeExists | read-only | mandatory | Indicates whether the blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.4 | ColumnserviceDataBladePowerState | read-only | mandatory | Indicates whether the blade specified is powered on or not. If the AMM is experiencing a communication problem with the blade, the state may be returned as unk… |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.5 | ColumnserviceDataBladeName | read-only | mandatory | The name of the blade as a string. |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.6 | ColumnserviceDataBladeCapability | read-only | deprecated | Indicates whether the blade has the capability to trigger service data. NOTE: This Mib object is deprecated and no longer supported. Please see serviceDataBlad… |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.7 | ColumnserviceDataDumpInitiate | read-write | mandatory | Initiates a type of dump collection to be initiated for the blade. NOTE: Not all blades support this, please check serviceDataDumpCapabilityMask OID to see if … |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.8 | ColumnserviceDataDumpRetrieve | read-write | mandatory | Retrieve a type of service data file from blade to AMM. NOTE: This OID only is valid for the last four bit mask designations listed in the serviceDataDumpCapab… |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.9 | ColumnserviceDataDumpCapabilityMask | read-only | mandatory | Indicates whether the blade has the capability to trigger service data and if so, which operations are supported and whether the file can be transferred to the… |
| 1.3.6.1.4.1.2.3.51.2.23.3.1.1.10 | ColumnserviceDataDumpInProgress | read-only | mandatory | An indicator as to whether a blade dump is in progress for the specified blade. This object ONLY applies to dumps that can be triggered by the AMM and where th… |
| 1.3.6.1.4.1.2.3.51.2.23.3.3 | NodebladeSystemReferenceCodes | |||
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1 | TablebladeSysRefCodesTable | not-accessible | mandatory | Table of blade system reference codes. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1 | RowbladeSysRefCodesEntry | not-accessible | mandatory | Boot sequence entry |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1.1 | ColumnsysRefCodeIndex | read-only | mandatory | System reference codes index. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1.2 | ColumnsysRefCodeBayNumber | read-only | mandatory | The bay number of the blade which has the system reference code. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1.3 | ColumnsysRefCodeSequence | read-only | mandatory | Indicates whether the blade specified exists or not. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1.4 | ColumnsysRefCode | read-write | mandatory | Unique ID and system reference code for the blade. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.1.1.5 | ColumnsysRefCodeTimestamp | read-write | mandatory | Timestamp of system reference code for the blade. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2 | TablebladeSysRefCodesDetailsTable | not-accessible | mandatory | Table of details of blade system reference codes. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1 | RowbladeSysRefCodesDetailsEntry | not-accessible | mandatory | Boot sequence entry |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1.1 | ColumnsysRefCodeDetailIndex | read-only | mandatory | System reference codes index. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1.2 | ColumnsysRefCodeDetailBayNumber | read-only | mandatory | The bay number of the blade which has the details of system reference code. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1.3 | ColumnsysRefCodeDetailSRCSequence | read-only | mandatory | A sequence of the system reference codes for the blade. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1.4 | ColumnsysRefCodeDetailSequence | read-write | mandatory | A sequence of the detailed information of the system reference codes for the blade. |
| 1.3.6.1.4.1.2.3.51.2.23.3.3.2.1.5 | ColumnsysRefCodeDetailDataString | read-write | mandatory | Detailed information of the system reference codes for the blade. |
| 1.3.6.1.4.1.2.3.51.2.23.4 | NodeserviceAdvisor | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.1 | NodeautoCallHomeSetup | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.1.1 | ScalaracceptLicenseAgreement | read-write | mandatory | Accept Terms and Conditions of AMM Service Advisor. The user will have to accept the terms and conditions before Service Advisor can send diagnostic data to IB… |
| 1.3.6.1.4.1.2.3.51.2.23.4.1.2 | ScalarserviceAdvisorEnable | read-write | mandatory | Disable/Enable IBM Support. The User Agreement must be accepted and the contact information must be set before the IBM Support function of Service Advisor can … |
| 1.3.6.1.4.1.2.3.51.2.23.4.2 | NodeserviceSupportCenter | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.2.1 | ScalaribmSupportCenter | read-write | mandatory | The country code for the IBM Support Center. 2 character ISO country code. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3 | NodecontactInformation | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.3.1 | ScalarcompanyName | read-write | mandatory | The organization/company name of the contact person. 1-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.2 | ScalarcontactName | read-write | mandatory | The name of the contact person.1-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.3 | ScalarphoneNumber | read-write | mandatory | The phone of the contact person. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.4 | ScalaremailAddress | read-write | mandatory | The email of the contact person. It must contain '@' and dot '.' in form userid@hostname (50 characters maximum). The userid can be alphanumeric characters, '.… |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.5 | Scalaraddress | read-write | mandatory | The address of the machine location. The information in this field should be of sufficient detail to allow someone to quickly find the chassis when necessary. … |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.6 | Scalarcity | read-write | mandatory | The city of the machine location. 1-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.7 | Scalarstate | read-write | mandatory | The state of the machine location. 2-3 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.8 | ScalarpostalCode | read-write | mandatory | The postal code of the location for this system. 1-9 characters, only alphanumeric characters are valid. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.10 | ScalarphoneNumberExt | read-write | mandatory | The extension of the phone. 30 characters maximum. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.11 | ScalaraltContactName | read-write | mandatory | (Optional) The name of the alternate contact person.1-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.12 | ScalaraltPhoneNumber | read-write | mandatory | (Optional) The phone of the alternate contact person. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.13 | ScalaraltPhoneNumberExt | read-write | mandatory | (Optional) The extension of the alternate phone. 30 characters maximum. |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.14 | ScalaraltEmailAddress | read-write | mandatory | (Optional) The email of the alternate contact person. It must contain '@' and dot '.' in form userid@hostname (50 characters maximum). The userid can be alphan… |
| 1.3.6.1.4.1.2.3.51.2.23.4.3.15 | ScalarmachineLocPhone | read-write | mandatory | (Optional) The contact phone number of the machine location. 5-30 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.4 | NodehttpProxyConfig | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.4.1 | ScalarhttpProxyEnable | read-write | mandatory | Disable/Enable of the HTTP Proxy. Select Enable to use the proxy for call home connections from the AMM to IBM. HTTP Proxy is used by the AMM when it is not co… |
| 1.3.6.1.4.1.2.3.51.2.23.4.4.2 | ScalarhttpProxyLocation | read-write | mandatory | Fully qualified host name or IP address of the HTTP Proxy. Maximum of 63 characters. |
| 1.3.6.1.4.1.2.3.51.2.23.4.4.3 | ScalarhttpProxyPort | read-write | mandatory | The port number of the HTTP Proxy. An integer value from 1 to 65535. |
| 1.3.6.1.4.1.2.3.51.2.23.4.4.4 | ScalarhttpProxyUserName | read-write | mandatory | User Name of the HTTP Proxy. A maximum of 30 characters string without spaces. |
| 1.3.6.1.4.1.2.3.51.2.23.4.4.5 | ScalarhttpProxyPassword | read-write | mandatory | Password of the HTTP Proxy. A maximum of 15 characters string without spaces. |
| 1.3.6.1.4.1.2.3.51.2.23.4.5 | NodeactivityLogs | |||
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1 | TableactivityLogTable | not-accessible | mandatory | Table of Service Advisor Activity Log entries information. This table displays the last five events that were generated by the system or user that are called h… |
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1.1 | RowactivityLogEntry | not-accessible | mandatory | Activity Log table entry. Each entry has the result of the call-home attempt, the service number assigned for the issue by IBM support, the event ID, event sou… |
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1.1.1 | ColumnactivityLogIndex | read-only | mandatory | The Activity Log index number. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1.1.2 | ColumnactivityLogString | read-only | mandatory | A string of data detailing one Activity Log entry. The text message is from the original entry in the event log. For consistent results, view as a table and no… |
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1.1.3 | ColumnactivityLogAcknowledge | read-write | mandatory | The acknowledgement of one Activity Log entry as corrected. This field allows the users to set a reminder next to certain events to indicate their awareness of… |
| 1.3.6.1.4.1.2.3.51.2.23.4.5.1.1.4 | ColumnactivityLogAttribute | read-only | mandatory | A string of data detailing one Activity Log entry's attribute. It contains states of both calling IBM support and FTP/TFTP Server. A PENDING indicates that the… |
| 1.3.6.1.4.1.2.3.51.2.23.5 | NodeautoFTPSetup | |||
| 1.3.6.1.4.1.2.3.51.2.23.5.1 | ScalarautoFTPCallMode | read-write | mandatory | This field specifies the automated problem reporting mode. Automated problem reporting mode allows the AMM to automatically put service data to a specified ser… |
| 1.3.6.1.4.1.2.3.51.2.23.5.2 | ScalarautoFTPCallAddr | read-write | mandatory | This field specifies the remote server address of FTP and TFTP. It should be fully qualified hostname or IP address. |
| 1.3.6.1.4.1.2.3.51.2.23.5.3 | ScalarautoFTPCallPort | read-write | mandatory | This field specifies the port on remote FTP/TFTP server for data transmission. |
| 1.3.6.1.4.1.2.3.51.2.23.5.4 | ScalarautoFTPCallUserID | read-write | mandatory | This field specifies the user account to login remote FTP server. |
| 1.3.6.1.4.1.2.3.51.2.23.5.5 | ScalarautoFTPCallPassword | read-write | mandatory | This field specifies the password to login remote FTP server. |
| 1.3.6.1.4.1.2.3.51.2.23.6 | NodecallHomeExclusionEvents | |||
| 1.3.6.1.4.1.2.3.51.2.23.6.1 | TablereadCallHomeExclusionEventTable | not-accessible | mandatory | Table of Call Home Exclusion Event entries information. |
| 1.3.6.1.4.1.2.3.51.2.23.6.1.1 | RowreadCallHomeExclusionEventEntry | not-accessible | mandatory | Call Home Exclusion Event table entry |
| 1.3.6.1.4.1.2.3.51.2.23.6.1.1.1 | ColumnreadCallHomeExclusionEventIndex | read-only | mandatory | The index number of one Call Home Exclusion Event. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.23.6.1.1.2 | ColumnreadCallHomeExclusionEventID | read-only | mandatory | The Event ID of one Call Home Exclusion Event entry. For consistent results, view as a table and not as individual entries. |
| 1.3.6.1.4.1.2.3.51.2.23.6.2 | ScalaraddCallHomeExclusionEvent | read-write | mandatory | Add one call home Event ID into the Call Home Exclusion List. The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'. If S… |
| 1.3.6.1.4.1.2.3.51.2.23.6.3 | ScalarrmCallHomeExclusionEvent | read-write | mandatory | Remove one call home Event ID from the Call Home Exclusion List. The Event ID is an 8-digit hexadecimal number (0-F) with an optional prefix of '0x' or '0X'. I… |
| 1.3.6.1.4.1.2.3.51.2.23.6.4 | ScalarrmAllCallHomeExclusionEvent | read-write | mandatory | Remove all Event IDs from the Call Home Exclusion List. If Service Advisor Terms and Conditions are accepted, events on the exclusion list can be removed. NOTE… |
| 1.3.6.1.4.1.2.3.51.2.24 | Nodescaling | |||
| 1.3.6.1.4.1.2.3.51.2.24.1 | TablescalableComplexTable | not-accessible | mandatory | Table of scalable complex information. This table provides information and control actions related to the scalable complexes installed in the chassis. Partitio… |
| 1.3.6.1.4.1.2.3.51.2.24.1.1 | RowscalableComplexEntry | not-accessible | mandatory | Scalable complex information. |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.1 | ColumnscalableComplexIdentifier | read-only | mandatory | The unique numeric identifier for a complex installed in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.2 | ColumnscalableComplexNumPartitions | read-only | mandatory | The number of partitions currently defined for this complex. |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.3 | ColumnscalableComplexNumNodes | read-only | mandatory | The number of nodes existing in this complex, regardless of their assignment to any given partition. The physical slot location of the nodes can be determined … |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.4 | ColumnscalableComplexPartStartSlot | read-write | mandatory | The lowest slot number occupied by the nodes in the new partition that is being created via the scalableComplexAction=create(3) action. This object must be set… |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.5 | ColumnscalableComplexPartNumNodes | read-write | mandatory | The number of nodes to be included in the new partition that is being created via the scalableComplexAction=create(3) action. This object must be set prior to … |
| 1.3.6.1.4.1.2.3.51.2.24.1.1.6 | ColumnscalableComplexAction | write-only | mandatory | This object allows various actions to be taken in relation to a particular complex. clear(1) - This clears all partition information related to the complex. An… |
| 1.3.6.1.4.1.2.3.51.2.24.2 | TablescalableComplexPartitionTable | not-accessible | mandatory | Table of scalable complex partition information. This table provides information and control actions related to the partitions defined across all of the comple… |
| 1.3.6.1.4.1.2.3.51.2.24.2.1 | RowscalableComplexPartitionEntry | not-accessible | mandatory | Scalable complex partition information. |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.1 | ColumnscalableComplexId | read-only | mandatory | The unique numeric identifier for a complex installed in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.2 | ColumnscalableComplexPartitionIdentifier | read-only | mandatory | The unique numeric identifier for a partition defined within a complex installed in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.3 | ColumnscalableComplexPartitionMode | read-write | mandatory | The currently configured mode of this partition. It is recommended that a partition be powered off prior to modification of the mode. In addition, switching a … |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.4 | ColumnscalableComplexPartitionNumNodes | read-only | mandatory | The number of nodes currently defined for this partition. |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.5 | ColumnscalableComplexPartitionStatus | read-only | mandatory | The current power status of this partition when the partition has a valid partition configuration. However, in the event the partition reports a partition cons… |
| 1.3.6.1.4.1.2.3.51.2.24.2.1.6 | ColumnscalableComplexPartitionAction | write-only | mandatory | This object allows various actions to be taken in relation to a particular partition in a given complex. delete(1) - Deletes the partition from the complex. Al… |
| 1.3.6.1.4.1.2.3.51.2.24.3 | TablescalableComplexNodeTable | not-accessible | mandatory | Table of scalable complex node information. This table provides information and control actions related to the nodes installed in the chassis. Complex, partiti… |
| 1.3.6.1.4.1.2.3.51.2.24.3.1 | RowscalableComplexNodeEntry | not-accessible | mandatory | Scalable complex node information. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.1 | ColumnscalableComplexNodeSlot | read-only | mandatory | The base slot number where the node exists in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.2 | ColumnscalableComplexNodeName | read-only | mandatory | The description string which uniquely identifies the blade. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.3 | ColumnscalableComplexNodeType | read-only | mandatory | The general categorization of the node. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.4 | ColumnscalableComplexNodeResources | read-only | mandatory | A string providing a summary overview of the resources provided by this node. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.5 | ColumnscalableComplexNodeRole | read-only | mandatory | Indicates if the node is assigned to a partition, and if so, provides an indication of whether the node is the primary node of the partition or not. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.6 | ColumnscalableComplexNodeState | read-only | mandatory | The physical power state of this node. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.7 | ColumnscalableComplexNodeUUID | read-only | mandatory | The Universally Unique IDentifier (UUID) of this node, represented as a 16 byte hex number. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.8 | ColumnscalableComplexNodeSerialNum | read-only | mandatory | The serial number of this node. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.9 | ColumnscalableComplexNodeNumPorts | read-only | mandatory | The number of remote nodes that this node has links to. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.10 | ColumnscalableComplexNodeComplexID | read-only | mandatory | For an assigned node, the identifier of the complex this node is related to. For an unassigned node, this object has no meaning. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.11 | ColumnscalableComplexNodePartitionID | read-only | mandatory | For an assigned node, the identifier of the partition this node is related to. For an unassigned node, this object has no meaning. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.12 | ColumnscalableComplexNodeLogicalID | read-only | mandatory | The unique numeric identifier for this node, unique within the partition. |
| 1.3.6.1.4.1.2.3.51.2.24.3.1.14 | ColumnscalableComplexNodeAction | write-only | mandatory | The actions that can be applied to an unassigned node. The current state is provided by the scalableComplexNodeState object. |
| 1.3.6.1.4.1.2.3.51.2.24.4 | TablescalableComplexNodePortTable | not-accessible | mandatory | Table of scalable complex node port information which provides details related to the port connectivity. Complex, partition and node information and control ar… |
| 1.3.6.1.4.1.2.3.51.2.24.4.1 | RowscalableComplexNodePortEntry | not-accessible | mandatory | Scalable complex node port information. |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.1 | ColumnscalableComplexNodePortSlot | read-only | mandatory | The base slot number where the node exists in the chassis. |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.2 | ColumnscalableComplexNodePortNum | read-only | mandatory | The port number of a port on this node. Note that this port number is 0-based, but since it is used as the table index (0 is not allowed), it will be presented… |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.3 | ColumnscalableComplexNodePortRemChkSum | read-only | mandatory | The checksum of the remote port, used as a port identifier. |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.4 | ColumnscalableComplexNodePortRemNum | read-only | mandatory | The zero-based port number of the remote port. |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.5 | ColumnscalableComplexNodePortStatus | read-only | mandatory | The current status of the port. |
| 1.3.6.1.4.1.2.3.51.2.24.4.1.6 | ColumnscalableComplexNodePortType | read-only | mandatory | The port type. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InetAddressIPv6 | OCTET STRING (SIZE (16)) EntryStatus ::= INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | current | Represents an IPv6 network address. Since MIB browsers may require different formats, the address is expected to be the 16 byte address in network-byte order, and shortened formats such as 0::0 are not accepted in SET o… |