MIB Viewer

BLADETYPE2-SWITCH-MIB

444 objects
The MIB module for the general switch configuration and information .
Imported Objects
BRIDGE-MIBBridgeId
HP-SWITCH-PL-MIBhpSwitchBladeType2-Mgmt
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString MacAddress PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1IdentityagentThe MIB module for the general switch configuration and information .
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1NodeagentConfig
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1NodeagSystem
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.2ScalaragApplyConfigurationread-writecurrentThis is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.3ScalaragSavePendingread-onlycurrentThis object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.4ScalaragSaveConfigurationread-writecurrentThis is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.5ScalaragRevertread-writecurrentThis is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. Thi…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.6ScalaragRevertApplyread-writecurrentThis is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.7ScalaragResetread-writecurrentThis is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8ScalaragConfigForNxtResetread-writecurrentThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.9ScalaragImageForNxtResetread-writecurrentThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.10ScalaragSoftwareVersionread-onlycurrentThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.11ScalaragBootVerread-onlycurrentThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.12ScalaragImage1Verread-onlycurrentThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.13ScalaragImage2Verread-onlycurrentThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.14ScalaragRtcDateread-writecurrentThe date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.15ScalaragRtcTimeread-writecurrentThe time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.16ScalaragLastSetErrorReasonread-onlycurrentThe error reason of the last SET failure.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.17ScalaragCurCfgHttpServerPortread-onlycurrentThe TCP port number that the HTTP server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.18ScalaragNewCfgHttpServerPortread-writecurrentThe TCP port number that the HTTP server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.19ScalaragCurCfgLoginBannerread-onlycurrentThe user defined login banner.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.20ScalaragNewCfgLoginBannerread-writecurrentThe user defined login banner.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.23ScalaragCurCfgConsoleread-onlycurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.24ScalaragNewCfgConsoleread-writecurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.29ScalaragCurCfgBootpread-onlycurrentEnable or disable the use of BootP, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.30ScalaragNewCfgBootpread-writecurrentEnable or disable the use of BootP, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.31ScalaragSlotNumberread-onlycurrentIdentifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.32ScalaragCurCfgSnmpTimeoutread-onlycurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.33ScalaragNewCfgSnmpTimeoutread-writecurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.34ScalaragCurCfgTelnetServerPortread-onlycurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.35ScalaragNewCfgTelnetServerPortread-writecurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.36ScalaragClearFlashDumpread-writecurrentThis is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.37ScalaragRackIdread-onlycurrentThe rack unique identifier.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.38ScalaragChassisread-onlycurrentChassis serial number.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.39ScalaragCurCfgTftpServerPortread-onlycurrentThe TCP port number that the TFTP server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.40ScalaragNewCfgTftpServerPortread-writecurrentThe TCP port number that the TFTP server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.49ScalaragCurCfgHttpsServerPortread-onlycurrentThe TCP port number that the HTTPS server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.50ScalaragNewCfgHttpsServerPortread-writecurrentThe TCP port number that the HTTPS server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.51ScalaragCurDaylightSavingsread-onlycurrentThe daylight savings location.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.52ScalaragNewDaylightSavingsread-writecurrentThe daylight savings location.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.53ScalaragCurCfgIdleCLITimeoutread-onlycurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.54ScalaragNewCfgIdleCLITimeoutread-writecurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.55ScalaragCurCfgUfdTrapread-onlycurrentThe current status of the UFDFO SNMP trap.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.56ScalaragNewCfgUfdTrapread-writecurrentEnable or disable sending UFDFO SNMP trap.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.64ScalaragCurBootNxtCliModeread-onlycurrentCurrent boot mode.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.65ScalaragNewBootNxtCliModeread-writecurrentNext cli boot mode.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.70ScalaragCurCfgRemindersread-onlycurrentCurrent status of reminders feature.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.71ScalaragNewCfgRemindersread-writecurrentEnable or disable reminders feature.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2NodeagPortConfig
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.1ScalaragPortTableMaxEntread-onlycurrentThe maximum number of rows in the port configuration host table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2TableagPortCurCfgTablenot-accessiblecurrentThe table of port configuration in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1RowagPortCurCfgTableEntrynot-accessiblecurrentA row in the port table in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1ColumnagPortCurCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2ColumnagPortCurCfgStateread-onlycurrentThis is the state of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3ColumnagPortCurCfgVlanTagread-onlycurrentThis is VLAN tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4ColumnagPortCurCfgStpread-onlycurrentThis object is used to turn Spanning Tree on or off for the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5ColumnagPortCurCfgRmonread-onlycurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6ColumnagPortCurCfgPVIDread-onlycurrentThe default VLAN ID for the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11ColumnagPortCurCfgGigEthAutoNegread-onlycurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12ColumnagPortCurCfgGigEthSpeedread-onlycurrentSelects the port speed for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13ColumnagPortCurCfgGigEthModeread-onlycurrentThis object is used to select port mode for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14ColumnagPortCurCfgGigEthFctlread-onlycurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15ColumnagPortCurCfgPortNameread-onlycurrentThe switch port name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18ColumnagPortCurCfgLinkTrapread-onlycurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19ColumnagPortCurCfgTagPVIDread-onlycurrentThis is PVID tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20ColumnagPortCurCfgMulticastThresholdread-onlycurrentCurrent status of the port's Multicast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21ColumnagPortCurCfgMulticastThresholdRateread-onlycurrentCurrent port's Multicast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22ColumnagPortCurCfgBroadcastThresholdread-onlycurrentCurrent status of the port's Broadcast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23ColumnagPortCurCfgBroadcastThresholdRateread-onlycurrentCurrent port's Broadcast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24ColumnagPortCurCfgDLFThresholdread-onlycurrentCurrent status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25ColumnagPortCurCfgDLFThresholdRateread-onlycurrentCurrent port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2TableagPortFiberCurCfgTablenot-accessiblecurrentThe table of fiber port configuration in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1RowagPortFiberCurCfgTableEntrynot-accessiblecurrentA row in the fiber port table in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1ColumnagPortFiberCurCfgIndxread-onlycurrentThe index of the row in fiber port current configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2ColumnagPortFiberCurCfgTxCtrlread-onlycurrentThis is the state of the TX control.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3ColumnagPortFiberCurCfgTxPulseread-onlycurrentThis is the state of the TX pulse.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4ColumnagPortFiberCurCfgTxUpread-onlycurrentCurrent TX up time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5ColumnagPortFiberCurCfgTxDnread-onlycurrentCurrent TX dn time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3TableagPortNewCfgTablenot-accessiblecurrentThe table of port configuration in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1RowagPortNewCfgTableEntrynot-accessiblecurrentA row in the port configuration table in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1ColumnagPortNewCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2ColumnagPortNewCfgStateread-writecurrentThis is the state of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3ColumnagPortNewCfgVlanTagread-writecurrentThis is VLAN tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4ColumnagPortNewCfgStpread-writecurrentThis object is used to turn Spanning Tree on or off for the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5ColumnagPortNewCfgRmonread-writecurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6ColumnagPortNewCfgPVIDread-writecurrentThe default VLAN ID for the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11ColumnagPortNewCfgGigEthAutoNegread-writecurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12ColumnagPortNewCfgGigEthSpeedread-writecurrentSelects the port speed for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13ColumnagPortNewCfgGigEthModeread-writecurrentThis object is used to select port mode for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14ColumnagPortNewCfgGigEthFctlread-writecurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15ColumnagPortNewCfgPortNameread-writecurrentThe switch port name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18ColumnagPortNewCfgLinkTrapread-writecurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19ColumnagPortNewCfgTagPVIDread-writecurrentThis is PVID tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20ColumnagPortNewCfgMulticastThresholdread-writecurrentNew status of the port's Multicast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21ColumnagPortNewCfgMulticastThresholdRateread-writecurrentNew port's Multicast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22ColumnagPortNewCfgBroadcastThresholdread-writecurrentNew status of the port's Broadcast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23ColumnagPortNewCfgBroadcastThresholdRateread-writecurrentNew port's Broadcast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24ColumnagPortNewCfgDLFThresholdread-writecurrentNew status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25ColumnagPortNewCfgDLFThresholdRateread-writecurrentNew port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2TableagPortFiberNewCfgTablenot-accessiblecurrentThe table of fiber port configuration in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1RowagPortFiberNewCfgTableEntrynot-accessiblecurrentA row in the fiber port table in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1ColumnagPortFiberNewCfgIndxread-onlycurrentThe index of the row in fiber port new configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2ColumnagPortFiberNewCfgTxCtrlread-writecurrentNew TX control.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3ColumnagPortFiberNewCfgTxPulseread-writecurrentNew TX pulse.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4ColumnagPortFiberNewCfgTxUpread-writecurrentNew TX up time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5ColumnagPortFiberNewCfgTxDnread-writecurrentNew TX dn time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3NodeagRadiusConfig
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.1ScalarradCurCfgPrimaryIpAddrread-onlycurrentThe IP address of the Primary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.2ScalarradNewCfgPrimaryIpAddrread-writecurrentThe IP address of the Primary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.3ScalarradCurCfgSecondaryIpAddrread-onlycurrentThe IP address of the Secondary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.4ScalarradNewCfgSecondaryIpAddrread-writecurrentThe IP address of the Secondary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.5ScalarradCurCfgPortread-onlycurrentSpecify the RADIUS port number.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.6ScalarradNewCfgPortread-writecurrentSpeicfy the RADIUS port number.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.7ScalarradCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.8ScalarradNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.9ScalarradCurCfgRetriesread-onlycurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.10ScalarradNewCfgRetriesread-writecurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.11ScalarradCurCfgStateread-onlycurrentEnable or disbale RADIUS authentication.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.12ScalarradNewCfgStateread-writecurrentEnable or disable RADIUS authentication.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.13ScalarradCurCfgAuthenStringread-onlycurrentThe RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.14ScalarradNewCfgAuthenStringread-writecurrentThe RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.15ScalarradCurCfgTelnetread-onlycurrentEnable or disbale RADIUS backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.16ScalarradNewCfgTelnetread-writecurrentEnable or disable RADIUS backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.17ScalarradCurCfgAuthenSecondStringread-onlycurrentThe second RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.18ScalarradNewCfgAuthenSecondStringread-writecurrentThe second RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.19ScalarradCurCfgSecBdread-onlycurrentEnable or disbale RADIUS secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.20ScalarradNewCfgSecBdread-writecurrentEnable or disable RADIUS secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4NodeagNTP
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.1ScalaragCurCfgNTPServerread-onlycurrentThe NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.2ScalaragNewCfgNTPServerread-writecurrentThe NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.3ScalaragCurCfgNTPResyncIntervalread-onlycurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.4ScalaragNewCfgNTPResyncIntervalread-writecurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.5ScalaragCurCfgNTPTzoneHHMMread-onlycurrentThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.6ScalaragNewCfgNTPTzoneHHMMread-writecurrentThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.7ScalaragCurCfgNTPDlightread-onlycurrentEnable/disable daylight savings time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.8ScalaragNewCfgNTPDlightread-writecurrentEnable/disable daylight savings time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.9ScalaragCurCfgNTPServiceread-onlycurrentEnable/disable NTP Service.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.10ScalaragNewCfgNTPServiceread-writecurrentEnable/disable NTP Service.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.11ScalaragCurCfgNTPSecServerread-onlycurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.12ScalaragNewCfgNTPSecServerread-writecurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5NodeagSyslog
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.1ScalaragCurCfgSyslogHostread-onlycurrentThe syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.2ScalaragNewCfgSyslogHostread-writecurrentThe syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.3ScalaragCurCfgSyslog2Hostread-onlycurrentThe second syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.4ScalaragNewCfgSyslog2Hostread-writecurrentThe second syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.5ScalaragCurCfgSyslogFacread-onlycurrentThe facility of syslog host in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.6ScalaragNewCfgSyslogFacread-writecurrentThe facility of syslog host in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.7ScalaragCurCfgSyslog2Facread-onlycurrentThe facility of syslog2 host in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.8ScalaragNewCfgSyslog2Facread-writecurrentThe facility of syslogs host in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.9ScalaragClrSyslogMsgsread-writecurrentClears all current Syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.10ScalaragSyslogMsgTableMaxSizeread-onlycurrentThe maximum number of rows in the syslog message table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11TableagSyslogMsgTablenot-accessiblecurrentThe table of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1RowagSyslogMsgTableEntrynot-accessiblecurrentA syslog message stored on the switch.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1ColumnagSyslogMsgIndexread-onlycurrentThe syslog message table index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2ColumnagSyslogMessageread-onlycurrentThe syslog message.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12NodeagLog
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.1ScalaragNewCfgSyslogTrapConsoleread-writecurrentEnable or disable console syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.2ScalaragCurCfgSyslogTrapConsoleread-onlycurrentEnable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.3ScalaragNewCfgSyslogTrapSystemread-writecurrentEnable or disable system level syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.4ScalaragCurCfgSyslogTrapSystemread-onlycurrentEnable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.5ScalaragNewCfgSyslogTrapMgmtread-writecurrentEnable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.6ScalaragCurCfgSyslogTrapMgmtread-onlycurrentEnable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7ScalaragNewCfgSyslogTrapCliread-writecurrentEnable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.8ScalaragCurCfgSyslogTrapCliread-onlycurrentEnable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.9ScalaragNewCfgSyslogTrapStgread-writecurrentEnable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.10ScalaragCurCfgSyslogTrapStgread-onlycurrentEnable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.11ScalaragNewCfgSyslogTrapVlanread-writecurrentEnable or disable VLAN syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.12ScalaragCurCfgSyslogTrapVlanread-onlycurrentEnable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.19ScalaragNewCfgSyslogTrapSshread-writecurrentEnable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.20ScalaragCurCfgSyslogTrapSshread-onlycurrentEnable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.21ScalaragNewCfgSyslogTrapVrrpread-writecurrentEnable or disable VRRP syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.22ScalaragCurCfgSyslogTrapVrrpread-onlycurrentEnable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.25ScalaragNewCfgSyslogTrapNtpread-writecurrentEnable or disable NTP syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.26ScalaragCurCfgSyslogTrapNtpread-onlycurrentEnable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.31ScalaragNewCfgSyslogTrapIpread-writecurrentEnable or disable IP related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.32ScalaragCurCfgSyslogTrapIpread-onlycurrentEnable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.35ScalaragNewCfgSyslogTrapWebread-writecurrentEnable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.36ScalaragCurCfgSyslogTrapWebread-onlycurrentEnable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.41ScalaragNewCfgSyslogTrapOspfread-writecurrentEnable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.42ScalaragCurCfgSyslogTrapOspfread-onlycurrentEnable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.45ScalaragNewCfgSyslogTrapRmonread-writecurrentEnable or disable rmon related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.46ScalaragCurCfgSyslogTrapRmonread-onlycurrentEnable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.47ScalaragNewCfgSyslogTrapUfdread-writecurrentEnable or disable UFD related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.48ScalaragCurCfgSyslogTrapUfdread-onlycurrentEnable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.49ScalaragNewCfgSyslogTrapCfgread-writecurrentEnable or disable CFG related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.50ScalaragCurCfgSyslogTrapCfgread-onlycurrentEnable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.51ScalaragNewCfgSyslogTrap8021xread-writecurrentEnable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.52ScalaragCurCfgSyslogTrap8021xread-onlycurrentEnable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.53ScalaragNewCfgSyslogTrapHotlinksread-writecurrentEnable or disable Hot Links related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.54ScalaragCurCfgSyslogTrapHotlinksread-onlycurrentEnable or disable Hot Links related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.13ScalaragCurCfgSyslogSevread-onlycurrentThe severity of syslog host in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.14ScalaragNewCfgSyslogSevread-writecurrentThe severity of syslog host in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.15ScalaragCurCfgSyslog2Sevread-onlycurrentThe severity of syslog2 host in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.16ScalaragNewCfgSyslog2Sevread-writecurrentThe severity of syslogs host in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6NodeagTrapHost
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.1ScalaragTrapHostTableMaxEntread-onlycurrentThe maximum number of rows in the trap host table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2TableagCurCfgTrapHostTablenot-accessiblecurrentThe table of trap hosts which to send SNMP traps in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1RowagCurCfgTrapHostEntrynot-accessiblecurrentA row in the trap host table in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1ColumnagCurCfgTrapHostIndxread-onlycurrentThe index of the row in trap host table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2ColumnagCurCfgTrapHostIpAddrread-onlycurrentThe IP address of a trap host.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3ColumnagCurCfgTrapHostCommStringread-onlycurrentThe SNMP community string to use with the trap host
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3TableagNewCfgTrapHostTablenot-accessiblecurrentThe table of trap hosts which to send SNMP traps in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1RowagNewCfgTrapHostEntrynot-accessiblecurrentA row in the trap host table in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1ColumnagNewCfgTrapHostIndxread-onlycurrentThe index of the row in trap host table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2ColumnagNewCfgTrapHostIpAddrread-writecurrentThe IP address of a trap host.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3ColumnagNewCfgTrapHostCommStringread-writecurrentThe SNMP community string to use with the trap host
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7NodeagTftp
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.1ScalaragTftpServerread-writecurrentThe TFTP server IP address or domain name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.2ScalaragTftpImageread-writecurrentWhether the image file should be loaded in image1 or image2 or boot in flash.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.3ScalaragTftpImageFileNameread-writecurrentThe image file name to be downloaded.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.4ScalaragTftpCfgFileNameread-writecurrentThe configuration file name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.5ScalaragTftpDumpFileNameread-writecurrentThe file name for core dump.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.6ScalaragTftpActionread-writecurrentThis is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image f…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.7ScalaragTftpLastActionStatusread-onlycurrentThe recorded status of the previous TFTP activity.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.9ScalaragTftpUserNameread-writecurrentThe username for FTP server or blank for TFTP server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.10ScalaragTftpPasswordread-writecurrentThe password for FTP server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.11ScalaragTftpTSDumpFileNameread-writecurrentThe file name for TS dump.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8NodeagApply
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.1ScalaragApplyPendingread-onlycurrentThis object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user t…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.2ScalaragApplyConfigread-writecurrentWhen this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operatio…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.4ScalaragApplyTableSizeread-onlycurrentThe number of strings in the apply table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5TableagApplyTablenot-accessiblecurrentThe table of URL path for URL load balancing in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1RowagApplyTableEntrynot-accessiblecurrentInformation about an URL path for URL load balancing.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1ColumnagApplyIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2ColumnagApplyStringread-onlycurrentA string in the apply table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10NodeagTacacsConfig
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.1ScalartacCurCfgPrimaryIpAddrread-onlycurrentThe IP address of the Primary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.2ScalartacNewCfgPrimaryIpAddrread-writecurrentThe IP address of the Primary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.3ScalartacCurCfgSecondaryIpAddrread-onlycurrentThe IP address of the Secondary TACSACS server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.4ScalartacNewCfgSecondaryIpAddrread-writecurrentThe IP address of the Secondary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.5ScalartacCurCfgPortread-onlycurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.6ScalartacNewCfgPortread-writecurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.7ScalartacCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.8ScalartacNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.9ScalartacCurCfgRetriesread-onlycurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.10ScalartacNewCfgRetriesread-writecurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.11ScalartacCurCfgStateread-onlycurrentEnable or disbale TACACS+ authentication.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.12ScalartacNewCfgStateread-writecurrentEnable or disable TACACS+ authentication.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.13ScalartacCurCfgAuthenStringread-onlycurrentThe TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.14ScalartacNewCfgAuthenStringread-writecurrentThe TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.15ScalartacCurCfgTelnetread-onlycurrentEnable or disbale TACACS+ backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.16ScalartacNewCfgTelnetread-writecurrentEnable or disable TACACS+ backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.17ScalartacCurCfgAuthenSecondStringread-onlycurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.18ScalartacNewCfgAuthenSecondStringread-writecurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.23ScalartacCurCfgSecBdread-onlycurrentEnable or disbale TACACS+ secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.24ScalartacNewCfgSecBdread-writecurrentEnable or disable TACACS+ secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.25ScalartacCurCfgCmapread-onlycurrentEnable/Disable Tacacs+ new prividlege level maping.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.26ScalartacNewCfgCmapread-writecurrentEnable/Disable Tacacs+ new prividlege level maping.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31TableagTacacsUserMapCurCfgTablenot-accessiblecurrentThe table of tacacs+ user map current configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1RowagTacacsUserMapCurCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1ColumnagTacacsUserMapCurCfgUIdread-onlycurrentThe current config remote privilege identifier.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2ColumnagTacacsUserMapCurCfgMappingread-onlycurrentCurrent Tacacs+ user privilege mappings.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32TableagTacacsUserMapNewCfgTablenot-accessiblecurrentThe table of tacacs+ user map new configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1RowagTacacsUserMapNewCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1ColumnagTacacsUserMapNewCfgUIdread-onlycurrentThe new config remote privilege identifier.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2ColumnagTacacsUserMapNewCfgMappingread-createcurrentSet new Tacacs+ user privilege mappings.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11NodeagMgmtNetConfig
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.1ScalaragMgmtNetTableMaxSizeread-onlycurrentThe maximum number of entries in the Management Network Table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2TableagCurCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1RowagCurCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1ColumnagCurCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2ColumnagCurCfgMgmtNetSubnetread-onlycurrentThe Management Network Address in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3ColumnagCurCfgMgmtNetMaskread-onlycurrentThe Management Network Mask in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3TableagNewCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1RowagNewCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1ColumnagNewCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2ColumnagNewCfgMgmtNetSubnetread-createcurrentThe Management Network Address in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3ColumnagNewCfgMgmtNetMaskread-createcurrentThe Management Network Mask in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4ColumnagNewCfgMgmtNetDeleteread-createcurrentBy setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12NodeagAccess
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.1ScalaragAccessUserMaxUserIDread-onlycurrentThe maximum number of Users ID.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2TableagAccessUserCurCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1RowagAccessUserCurCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1ColumnagAccessUserCurCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2ColumnagAccessUserCurCosread-onlycurrentThe user class of service.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3ColumnagAccessUserCurCfgNameread-onlycurrentThe user name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4ColumnagAccessUserCurCfgPswdread-onlycurrentThe character string representing the user passworde.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5ColumnagAccessUserCurCfgStateread-onlycurrentEnable or disable a user.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3TableagAccessUserNewCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1RowagAccessUserNewCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1ColumnagAccessUserNewCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2ColumnagAccessUserNewCosread-createcurrentThe user class of service.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3ColumnagAccessUserNewCfgNameread-createcurrentThe user name.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4ColumnagAccessUserNewCfgPswdread-createcurrentThe character string representing the user passworde.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5ColumnagAccessUserNewCfgStateread-createcurrentEnable or disable a user.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6ColumnagAccessUserNewCfgDeleteread-createcurrentThis is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2NodeagentStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1NodepktStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.1ScalarpktStatsAllocsread-onlycurrentTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.2ScalarpktStatsFreesread-onlycurrentTotal number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.3ScalarpktStatsAllocFailsread-onlycurrentTotal number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.4ScalarpktStatsMediumsread-onlycurrentTotal number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol sta…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.5ScalarpktStatsJumbosread-onlycurrentTotal number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.6ScalarpktStatsSmallsread-onlycurrentTotal number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.7ScalarpktStatsMediumsHiWatermarkread-onlycurrentThe highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protoc…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.8ScalarpktStatsJumbosHiWatermarkread-onlycurrentThe highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.9ScalarpktStatsSmallsHiWatermarkread-onlycurrentThe highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2NodempCpuStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.1ScalarmpCpuStatsUtil1Secondread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.2ScalarmpCpuStatsUtil4Secondsread-onlycurrentThe utilization of MP CPU over 4 seconds. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.3ScalarmpCpuStatsUtil64Secondsread-onlycurrentThe utilization of MP CPU over 64 seconds. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3NodeportStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1TableportStatsTablenot-accessiblecurrentThe table of port statistics.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1RowportStatsTableEntrynot-accessiblecurrentA row in the port stats table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1ColumnportStatsIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2ColumnportStatsPhyIfInOctetsread-onlycurrentThe total number of octets received on the interface, including framing characters.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3ColumnportStatsPhyIfInUcastPktsread-onlycurrentThe number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4ColumnportStatsPhyIfInNUcastPktsread-onlycurrentThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5ColumnportStatsPhyIfInDiscardsread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6ColumnportStatsPhyIfInErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7ColumnportStatsPhyIfInUnknownProtosread-onlycurrentThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8ColumnportStatsPhyIfOutOctetsread-onlycurrentThe total number of octets transmitted out of the interface, including framing characters.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9ColumnportStatsPhyIfOutUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10ColumnportStatsPhyIfOutNUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11ColumnportStatsPhyIfOutDiscardsread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12ColumnportStatsPhyIfOutErrorsread-onlycurrentThe number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13ColumnportStatsPhyIfOutQLenread-onlycurrentThe length of the output packet queue (in packets).
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14ColumnportStatsPhyIfInBroadcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15ColumnportStatsPhyIfOutBroadcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16ColumnportStatsClearread-writecurrentSetting this value to clear(1) clears the stats for this port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17ColumnportStatsPhyIfInMulticastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18ColumnportStatsPhyIfOutMulticastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2Tabledot1xPortStatsTablenot-accessiblecurrentThe table of 802.1x port statistics.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1Rowdot1xPortStatsTableEntrynot-accessiblecurrentA row in the 802.1x port stats table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1Columndot1xPortStatsIndxread-onlycurrentThe 802.1x port stats index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2ColumneapolFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3ColumneapolFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4ColumneapolStartFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5ColumneapolLogoffFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6ColumneapolRespIdFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7ColumneapolRespFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8ColumneapolReqIdFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9ColumneapolReqFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10ColumninvalidEapolFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11ColumneapLengthErrorFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12ColumnauthEntersConnectingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13ColumnauthEapLogoffsWhileConnectingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14ColumnauthEntersAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15ColumnauthSuccessesWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16ColumnauthTimeoutsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17ColumnauthFailWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18ColumnauthReauthsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19ColumnauthEapStartsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20ColumnauthEapLogoffWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21ColumnauthReauthsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22ColumnauthEapStartsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23ColumnauthEapLogoffWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24ColumnbackendResponsesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25ColumnbackendAccessChallengesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26ColumnbackendOtherRequestsToSupplicantread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27ColumnbackendNonNakResponsesFromSupplicantread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28ColumnbackendAuthSuccessesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29ColumnbackendAuthFailsread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30ColumnlastEapolFrameVersionread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31ColumnlastEapolFrameSourceread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.4NodespStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.5NodemgmtStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9NodentpStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.1ScalarntpPrimaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.2ScalarntpPrimaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.3ScalarntpPrimaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.4ScalarntpSecondaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.5ScalarntpSecondaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.6ScalarntpSecondaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.7ScalarntpLastUpdateServerread-onlycurrentThe type of ntp server updated last time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.8ScalarntpLastUpdateTimeread-onlycurrentThe last time updated by ntp server.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.9ScalarntpClearStatsread-writecurrentSetting this value to clear(2) clears the stats for ntp.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.10ScalarntpSystemCurrentTimeread-onlycurrentThe current system time.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10NodeaclPortStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1TableaclPortStatsTablenot-accessiblecurrentThe table of aclPort statistics.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1RowaclPortStatsTableEntrynot-accessiblecurrentA row in the aclPort stats table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1ColumnaclPortStatsIndxread-onlycurrentThe aclPort index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2ColumnaclPortStatsHitsread-onlycurrentTotal number of hits for this ACL entry on given port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3ColumnaclPortClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the ACL.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11NodeaclMeterPortStats
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1TableaclMeterPortStatsTablenot-accessiblecurrentThe table of aclMeterPort statistics.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1RowaclMeterPortStatsTableEntrynot-accessiblecurrentA row in the aclMeterPort stats table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1ColumnaclMeterPortStatsIndxread-onlycurrentThe aclMeterPort index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2ColumnaclMeterPortStatsHitsread-onlycurrentTotal number of hits for this ACL Meter entry on given port
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3ColumnaclMeterPortClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the ACL meter.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3NodeagentInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1Nodehardware
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.1ScalarhwPartNumberread-onlycurrentThe hardware part number of the Bladetype2 Switch.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.2ScalarhwRevisionread-onlycurrentThe hardware revision. If the revision is not available, a zero length string should be returned.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.3ScalarhwPowerSupplyStatusread-onlycurrentThe status of the internal power supply.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.4ScalarhwSensor1Tempread-onlycurrentThe temperature of the rear left sensor in degrees Celsius.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.5ScalarhwInsertedCubeTyperead-onlycurrentThe inserted cube type.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2NodeportInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1TableportInfoTablenot-accessiblecurrentThe table of port information.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1RowportInfoTableEntrynot-accessiblecurrentA row in the port information table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1ColumnportInfoIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2ColumnportInfoSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3ColumnportInfoModeread-onlycurrentThe current operational mode of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4ColumnportInfoFlowCtrlread-onlycurrentThe current operational flow control of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.5ColumnportInfoLinkread-onlycurrentThe current operational link status of the port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6ColumnportInfoPhyIfDescrread-onlycurrentA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7ColumnportInfoPhyIfTyperead-onlycurrentThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8ColumnportInfoPhyIfMturead-onlycurrentThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9ColumnportInfoPhyIfPhysAddressread-onlycurrentThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10ColumnportInfoPhyIfOperStatusread-onlycurrentThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11ColumnportInfoPhyIfLastChangeread-onlycurrentThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.3NodeswKeyInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4NodeagDiff
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.2ScalaragDiffStateread-writecurrentWhen this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.3ScalaragDiffTableSizeread-onlycurrentThe number of strings in the diff table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4TableagDiffTablenot-accessiblecurrentThe table of URL path for URL load balancing in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1RowagDiffTableEntrynot-accessiblecurrentInformation about an URL path for URL load balancing.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1ColumnagDiffIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2ColumnagDiffStringread-onlycurrentA string in the diff table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5NodeagCfgDump
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.2ScalaragCfgDumpStateread-writecurrentWhen this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation …
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.3ScalaragCfgDumpTableSizeread-onlycurrentThe number of strings in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4TableagCfgDumpTablenot-accessiblecurrentThe table of dump strings.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1RowagCfgDumpTableEntrynot-accessiblecurrentAn entry in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1ColumnagCfgDumpIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2ColumnagCfgDumpStringread-onlycurrentA string in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.6NodemgmtInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7NodegeaportInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1TablegeaportInfoTablenot-accessiblecurrentThe table of gea port mapping.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1RowgeaportInfoTableEntrynot-accessiblecurrentAn entry in the geaport table mapping.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1ColumngeaportInfoLogicalIndexread-onlycurrentThe logical port index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2ColumngeaportInfoPortread-onlycurrentThe GEA Port (0-based).
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3ColumngeaportInfoUnitread-onlycurrentThe GEA Unit.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8NodeufdInfo
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.1ScalarufdInfoStateread-onlycurrentUplink Failure Detection State.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.2ScalarufdInfoLtMStatusread-onlycurrentLtM Status.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.3ScalarufdInfoLtMPortsread-onlycurrentThe LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.4ScalarufdInfoLtMTrunksread-onlycurrentThe LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.5ScalarufdInfoLtDStatusread-onlycurrentLtD status.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.6ScalarufdInfoLtDPortsread-onlycurrentThe LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.7ScalarufdInfoLtDTrunksread-onlycurrentThe LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4NodeagentOper
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1TableagPortOperTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1RowagPortOperTableEntrynot-accessiblecurrentA row in the port operations table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1ColumnportOperIdxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2ColumnportOperStateread-writecurrentEnable/Disable port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3ColumnportOperRmonread-writecurrentEnable/Disable RMON for port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2TableportOperDot1xTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1RowportOperDot1xTableEntrynot-accessiblecurrentA row in the port 802.1x operation table.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1ColumnportOperDot1xIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2ColumnportOperDot1xResetread-writecurrentReinitialize 802.1x access control on port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3ColumnportOperDot1xReauthread-writecurrentInitiate reauthentication on port.
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2NodeagNTPOper
1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2.1ScalarntpOperSendReqread-writecurrentAllows the user to send requests to the NTP server.
MIB Viewer