MIB Viewer

BLADETYPE4-NETWORK-MIB

2225 objects
No module-level DESCRIPTION found.
Imported Objects
BRIDGE-MIBBridgeId
HP-SWITCH-PL-MIBhpSwitchBladeType4-Mgmt hpSwitchBladeType4-Products
RFC1155-SMIenterprises
RFC1213-MIBifIndex sysContact sysLocation sysName
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDisplayString MacAddress PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.11.2.3.7.11.33.4.1.1NodehpProLiant-GbE2c-InterconnectSwitch
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1Nodeagent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1NodeagentConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1NodeagSystem
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2ScalaragApplyConfigurationread-writecurrentThis is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3ScalaragSavePendingread-onlycurrentThis object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4ScalaragSaveConfigurationread-writecurrentThis is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5ScalaragRevertread-writecurrentThis is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. Thi…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.6ScalaragRevertApplyread-writecurrentThis is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7ScalaragResetread-writecurrentThis is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)...
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8ScalaragConfigForNxtResetread-writecurrentThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup con…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9ScalaragImageForNxtResetread-writecurrentThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10ScalaragSoftwareVersionread-onlycurrentThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11ScalaragBootVerread-onlycurrentThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12ScalaragImage1Verread-onlycurrentThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13ScalaragImage2Verread-onlycurrentThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available o…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14ScalaragRtcDateread-writecurrentThe date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15ScalaragRtcTimeread-writecurrentThe time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16ScalaragLastSetErrorReasonread-onlycurrentThe error reason of the last SET failure.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17ScalaragCurCfgHttpServerPortread-onlycurrentThe TCP port number that the HTTP server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18ScalaragNewCfgHttpServerPortread-writecurrentThe TCP port number that the HTTP server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19ScalaragCurCfgLoginBannerread-onlycurrentThe user defined login banner.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20ScalaragNewCfgLoginBannerread-writecurrentThe user defined login banner.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23ScalaragCurCfgConsoleread-onlycurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24ScalaragNewCfgConsoleread-writecurrentEnable or disable console output of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29ScalaragCurCfgBootpread-onlycurrentEnable or disable the use of BootP, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30ScalaragNewCfgBootpread-writecurrentEnable or disable the use of BootP, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31ScalaragSlotNumberread-onlycurrentIdentifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32ScalaragCurCfgSnmpTimeoutread-onlycurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33ScalaragNewCfgSnmpTimeoutread-writecurrentOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be fr…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34ScalaragCurCfgTelnetServerPortread-onlycurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35ScalaragNewCfgTelnetServerPortread-writecurrentThe TCP port number that the telnet server listens for telnet sessions.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36ScalaragClearFlashDumpread-writecurrentThis is an action object to clear the FLASH dump. ok(1) is returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37ScalaragRackIdread-onlycurrentThe rack unique identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38ScalaragChassisread-onlycurrentChassis serial number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39ScalaragCurCfgTftpServerPortread-onlycurrentThe TCP port number that the TFTP server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40ScalaragNewCfgTftpServerPortread-writecurrentThe TCP port number that the TFTP server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49ScalaragCurCfgHttpsServerPortread-onlycurrentThe TCP port number that the HTTPS server is listening to in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50ScalaragNewCfgHttpsServerPortread-writecurrentThe TCP port number that the HTTPS server is listening to in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51ScalaragCurDaylightSavingsread-onlycurrentThe daylight savings location.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52ScalaragNewDaylightSavingsread-writecurrentThe daylight savings location.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53ScalaragCfgSysDlightread-writecurrentEnable/disable daylight savings time.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55ScalaragCurCfgIdleCLITimeoutread-onlycurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56ScalaragNewCfgIdleCLITimeoutread-writecurrentSet idle CLI sessions timeout.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57ScalaragCurCfgUfdTrapread-onlycurrentThe current status of the UFDFO SNMP trap.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58ScalaragNewCfgUfdTrapread-writecurrentEnable or disable sending UFDFO SNMP trap.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59ScalaragCurCfgRemindersread-onlycurrentCurrent status of reminders feature.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60ScalaragNewCfgRemindersread-writecurrentEnable or disable reminders feature.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66ScalaragCurBootNxtCliModeread-onlycurrentCurrent boot mode.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67ScalaragNewBootNxtCliModeread-writecurrentNext cli boot mode.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70ScalaragCurCfgDhcpread-onlycurrentEnable or disable the use of DHCP, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71ScalaragNewCfgDhcpread-writecurrentEnable or disable the use of DHCP, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72ScalaragCfgL3Statusread-onlycurrentThe current status of L3 feature.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73ScalaragCurCfgHpromptread-onlycurrentCurrent status of hprompt.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75ScalaragNewCfgHpromptread-writecurrentNew status of hpprompt.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76ScalaragCurCfgLoginNoticeread-onlycurrentThe user defined login notice.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77ScalaragNewCfgLoginNoticeread-writecurrentThe user defined login notice.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78ScalaragCurBootNxtCliModePromptread-onlycurrentCurrent status of selectable CLI mode prompt.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79ScalaragNewBootNxtCliModePromptread-writecurrentNext status of selectable CLI mode prompt.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82ScalaragCurCfgOldDstread-onlycurrentEnable or disable system DST for US.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83ScalaragNewCfgOldDstread-writecurrentEnable or disable system DST for US.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.84ScalaragHavePanicDumpread-onlycurrentThis object, when read, gives the user the information whether a panic dump exist in flash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2NodeagPortConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.1ScalaragPortTableMaxEntread-onlycurrentThe maximum number of rows in the port configuration host table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2TableagPortCurCfgTablenot-accessiblecurrentThe table of port configuration in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1RowagPortCurCfgTableEntrynot-accessiblecurrentA row in the port table in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.1ColumnagPortCurCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.2ColumnagPortCurCfgStateread-onlycurrentThis is the state of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.3ColumnagPortCurCfgVlanTagread-onlycurrentThis is VLAN tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.5ColumnagPortCurCfgRmonread-onlycurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.6ColumnagPortCurCfgPVIDread-onlycurrentThe default VLAN ID for the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.11ColumnagPortCurCfgGigEthAutoNegread-onlycurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.12ColumnagPortCurCfgGigEthSpeedread-onlycurrentSelects the port speed for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.13ColumnagPortCurCfgGigEthModeread-onlycurrentThis object is used to select port mode for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.14ColumnagPortCurCfgGigEthFctlread-onlycurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.15ColumnagPortCurCfgPortNameread-onlycurrentThe switch port name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.18ColumnagPortCurCfgLinkTrapread-onlycurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.19ColumnagPortCurCfgTagPVIDread-onlycurrentThis is PVID tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.20ColumnagPortCurCfgMulticastThresholdread-onlycurrentCurrent status of the port's Multicast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.21ColumnagPortCurCfgMulticastThresholdRateread-onlycurrentCurrent port's Multicast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.22ColumnagPortCurCfgBroadcastThresholdread-onlycurrentCurrent status of the port's Broadcast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.23ColumnagPortCurCfgBroadcastThresholdRateread-onlycurrentCurrent port's Broadcast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.24ColumnagPortCurCfgDLFThresholdread-onlycurrentCurrent status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.25ColumnagPortCurCfgDLFThresholdRateread-onlycurrentCurrent port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.26ColumnagPortCurCfgPortMediaread-onlycurrentThe switch port media.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.27ColumnagPortCurCfgPortMediatread-onlycurrentThe switch port media.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.28ColumnagPortCurCfgTyperead-onlycurrentThe switch port type.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3TableagPortNewCfgTablenot-accessiblecurrentThe table of port configuration in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1RowagPortNewCfgTableEntrynot-accessiblecurrentA row in the port configuration table in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.1ColumnagPortNewCfgIndxread-onlycurrentThe index of the row in port configurations table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.2ColumnagPortNewCfgStateread-writecurrentThis is the state of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.3ColumnagPortNewCfgVlanTagread-writecurrentThis is VLAN tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.5ColumnagPortNewCfgRmonread-writecurrentThis object is used to turn RMON on or off on the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.6ColumnagPortNewCfgPVIDread-writecurrentThe default VLAN ID for the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.11ColumnagPortNewCfgGigEthAutoNegread-writecurrentThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.12ColumnagPortNewCfgGigEthSpeedread-writecurrentSelects the port speed for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.13ColumnagPortNewCfgGigEthModeread-writecurrentThis object is used to select port mode for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.14ColumnagPortNewCfgGigEthFctlread-writecurrentThis object is used to select port flow control for gigabit Ethernet connection.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.15ColumnagPortNewCfgPortNameread-writecurrentThe switch port name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.18ColumnagPortNewCfgLinkTrapread-writecurrentIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.19ColumnagPortNewCfgTagPVIDread-writecurrentThis is PVID tag state of the port
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.20ColumnagPortNewCfgMulticastThresholdread-writecurrentNew status of the port's Multicast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.21ColumnagPortNewCfgMulticastThresholdRateread-writecurrentNew port's Multicast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.22ColumnagPortNewCfgBroadcastThresholdread-writecurrentNew status of the port's Broadcast Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.23ColumnagPortNewCfgBroadcastThresholdRateread-writecurrentNew port's Broadcast Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.24ColumnagPortNewCfgDLFThresholdread-writecurrentNew status of the port's Destination Lookup Fail Threshold.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.25ColumnagPortNewCfgDLFThresholdRateread-writecurrentNew port's Destination Lookup Fail Threshold Rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.26ColumnagPortNewCfgPortMediaread-writecurrentNew status of the port's Media.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.27ColumnagPortNewCfgPortMediatread-writecurrentNew status of the port's Media.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.28ColumnagPortNewCfgTyperead-onlycurrentThe switch port type.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3NodeagRadiusConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.1ScalarradCurCfgPrimaryIpAddrread-onlycurrentThe IP address of the Primary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.2ScalarradNewCfgPrimaryIpAddrread-writecurrentThe IP address of the Primary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.3ScalarradCurCfgSecondaryIpAddrread-onlycurrentThe IP address of the Secondary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.4ScalarradNewCfgSecondaryIpAddrread-writecurrentThe IP address of the Secondary RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.5ScalarradCurCfgPortread-onlycurrentSpecify the RADIUS port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.6ScalarradNewCfgPortread-writecurrentSpeicfy the RADIUS port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.7ScalarradCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.8ScalarradNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.9ScalarradCurCfgRetriesread-onlycurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.10ScalarradNewCfgRetriesread-writecurrentNumber of retries to the RADIUS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.11ScalarradCurCfgStateread-onlycurrentEnable or disable RADIUS authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.12ScalarradNewCfgStateread-writecurrentEnable or disable RADIUS authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.13ScalarradCurCfgAuthenStringread-onlycurrentThe RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.14ScalarradNewCfgAuthenStringread-writecurrentThe RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.15ScalarradCurCfgBackdoorread-onlycurrentEnable or disable RADIUS backdoor for telnet/ssh/http/https.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.16ScalarradNewCfgBackdoorread-writecurrentEnable or disable RADIUS backdoor for telnet/ssh/http/https.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.17ScalarradCurCfgAuthenSecondStringread-onlycurrentThe second RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.18ScalarradNewCfgAuthenSecondStringread-writecurrentThe second RADIUS authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.19ScalarradCurCfgSecBdread-onlycurrentEnable or disable RADIUS secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.3.20ScalarradNewCfgSecBdread-writecurrentEnable or disable RADIUS secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4NodeagNTP
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.1ScalaragCurCfgNTPServerread-onlycurrentThe NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.2ScalaragNewCfgNTPServerread-writecurrentThe NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.3ScalaragCurCfgNTPResyncIntervalread-onlycurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.4ScalaragNewCfgNTPResyncIntervalread-writecurrentThe NTP Server resync interval in minutes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.9ScalaragCurCfgNTPServiceread-onlycurrentEnable/disable NTP Service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.10ScalaragNewCfgNTPServiceread-writecurrentEnable/disable NTP Service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.11ScalaragCurCfgNTPSecServerread-onlycurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.4.12ScalaragNewCfgNTPSecServerread-writecurrentThe Secondary NTP Server Address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5NodeagSyslog
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.1ScalaragCurCfgSyslogHostread-onlycurrentThe syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.2ScalaragNewCfgSyslogHostread-writecurrentThe syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.3ScalaragCurCfgSyslog2Hostread-onlycurrentThe second syslog host IP address, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.4ScalaragNewCfgSyslog2Hostread-writecurrentThe second syslog host IP address, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.5ScalaragCurCfgSyslogFacread-onlycurrentThe facility of syslog host in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.6ScalaragNewCfgSyslogFacread-writecurrentThe facility of syslog host in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.7ScalaragCurCfgSyslog2Facread-onlycurrentThe facility of syslog2 host in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.8ScalaragNewCfgSyslog2Facread-writecurrentThe facility of syslogs host in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.9ScalaragClrSyslogMsgsread-writecurrentClears all current Syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.10ScalaragSyslogMsgTableMaxSizeread-onlycurrentThe maximum number of rows in the syslog message table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11TableagSyslogMsgTablenot-accessiblecurrentThe table of syslog messages.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1RowagSyslogMsgTableEntrynot-accessiblecurrentA syslog message stored on the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.1ColumnagSyslogMsgIndexread-onlycurrentThe syslog message table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.2ColumnagSyslogMessageread-onlycurrentThe syslog message.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12NodeagLog
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.1ScalaragNewCfgSyslogTrapConsoleread-writecurrentEnable or disable console syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.2ScalaragCurCfgSyslogTrapConsoleread-onlycurrentEnable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.3ScalaragNewCfgSyslogTrapSystemread-writecurrentEnable or disable system level syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.4ScalaragCurCfgSyslogTrapSystemread-onlycurrentEnable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.5ScalaragNewCfgSyslogTrapMgmtread-writecurrentEnable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.6ScalaragCurCfgSyslogTrapMgmtread-onlycurrentEnable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.7ScalaragNewCfgSyslogTrapCliread-writecurrentEnable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.8ScalaragCurCfgSyslogTrapCliread-onlycurrentEnable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.9ScalaragNewCfgSyslogTrapStgread-writecurrentEnable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.10ScalaragCurCfgSyslogTrapStgread-onlycurrentEnable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.11ScalaragNewCfgSyslogTrapVlanread-writecurrentEnable or disable VLAN syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.12ScalaragCurCfgSyslogTrapVlanread-onlycurrentEnable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.19ScalaragNewCfgSyslogTrapSshread-writecurrentEnable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.20ScalaragCurCfgSyslogTrapSshread-onlycurrentEnable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.21ScalaragNewCfgSyslogTrapVrrpread-writecurrentEnable or disable VRRP syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.22ScalaragCurCfgSyslogTrapVrrpread-onlycurrentEnable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.25ScalaragNewCfgSyslogTrapNtpread-writecurrentEnable or disable NTP syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.26ScalaragCurCfgSyslogTrapNtpread-onlycurrentEnable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.31ScalaragNewCfgSyslogTrapIpread-writecurrentEnable or disable IP related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.32ScalaragCurCfgSyslogTrapIpread-onlycurrentEnable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.35ScalaragNewCfgSyslogTrapWebread-writecurrentEnable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.36ScalaragCurCfgSyslogTrapWebread-onlycurrentEnable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.41ScalaragNewCfgSyslogTrapOspfread-writecurrentEnable or disable OSPF related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.42ScalaragCurCfgSyslogTrapOspfread-onlycurrentEnable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.45ScalaragNewCfgSyslogTrapRmonread-writecurrentEnable or disable rmon related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.46ScalaragCurCfgSyslogTrapRmonread-onlycurrentEnable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.47ScalaragNewCfgSyslogTrapUfdread-writecurrentEnable or disable UFD related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.48ScalaragCurCfgSyslogTrapUfdread-onlycurrentEnable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.49ScalaragNewCfgSyslogTrapCfgread-writecurrentEnable or disable CFG related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.50ScalaragCurCfgSyslogTrapCfgread-onlycurrentEnable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.51ScalaragNewCfgSyslogTrap8021xread-writecurrentEnable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.52ScalaragCurCfgSyslogTrap8021xread-onlycurrentEnable or disable 802.1 related syslog and SNMP trap, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.55ScalaragNewCfgSyslogTrapAllread-writecurrentEnable or disable all syslog and SNMP traps, in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.12.56ScalaragCurCfgSyslogTrapAllread-onlycurrentEnable or disable all syslog and SNMP traps, as currently configured in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.13ScalaragCurCfgSyslogSevread-onlycurrentThe severity of syslog host in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.14ScalaragNewCfgSyslogSevread-writecurrentThe severity of syslog host in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.15ScalaragCurCfgSyslog2Sevread-onlycurrentThe severity of syslog2 host in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.16ScalaragNewCfgSyslog2Sevread-writecurrentThe severity of syslogs host in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7NodeagTransfer
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.1ScalaragTransferServerread-writecurrentThe FTP/TFTP server IP address or domain name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.2ScalaragTransferImageread-writecurrentWhether the image file should be loaded in image1 or image2 or boot in flash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.3ScalaragTransferImageFileNameread-writecurrentThe image file name to be downloaded.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.4ScalaragTransferCfgFileNameread-writecurrentThe configuration file name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.5ScalaragTransferDumpFileNameread-writecurrentThe core dump file name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.6ScalaragTransferActionread-writecurrentThis is an action object to perform various FTP/TFTP Get or Put functions. The FTP/TFTP sever is specified in agTransferServer object. img-get(2) - Download sw…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.7ScalaragTransferLastActionStatusread-onlycurrentThe recorded status of the previous FTP/TFTP activity.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.9ScalaragTransferUserNameread-writecurrentThe username for FTP server or blank for TFTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.10ScalaragTransferPasswordread-writecurrentThe password for FTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.11ScalaragTransferTSDumpFileNameread-writecurrentThe TS dump file name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.7.14ScalaragTransferLastConfigurationActionStatusread-onlycurrentThe status of the last configuration action using the file ftp/tftp'd from the server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8NodeagApply
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.1ScalaragApplyPendingread-onlycurrentThis object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user t…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.2ScalaragApplyConfigread-writecurrentWhen this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operatio…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.4ScalaragApplyTableSizeread-onlycurrentThe number of strings in the apply table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5TableagApplyTablenot-accessiblecurrentThe table of URL path for URL load balancing in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1RowagApplyTableEntrynot-accessiblecurrentInformation about an URL path for URL load balancing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.1ColumnagApplyIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.2ColumnagApplyStringread-onlycurrentA string in the apply table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10NodeagTacacsConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.1ScalartacCurCfgPrimaryIpAddrread-onlycurrentThe IP address of the Primary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.2ScalartacNewCfgPrimaryIpAddrread-writecurrentThe IP address of the Primary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.3ScalartacCurCfgSecondaryIpAddrread-onlycurrentThe IP address of the Secondary TACSACS server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.4ScalartacNewCfgSecondaryIpAddrread-writecurrentThe IP address of the Secondary TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.5ScalartacCurCfgPortread-onlycurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.6ScalartacNewCfgPortread-writecurrentSpecify the TACACS+ port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.7ScalartacCurCfgTimeoutread-onlycurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.8ScalartacNewCfgTimeoutread-writecurrentThe maximum number of seconds before resending authentication to TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.9ScalartacCurCfgRetriesread-onlycurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.10ScalartacNewCfgRetriesread-writecurrentNumber of retries to the TACACS+ server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.11ScalartacCurCfgStateread-onlycurrentEnable or disable TACACS+ authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.12ScalartacNewCfgStateread-writecurrentEnable or disable TACACS+ authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.13ScalartacCurCfgAuthenStringread-onlycurrentThe TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.14ScalartacNewCfgAuthenStringread-writecurrentThe TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.15ScalartacCurCfgBackdoorread-onlycurrentEnable or disable TACACS+ backdoor for telnet/ssh/http/https.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.16ScalartacNewCfgBackdoorread-writecurrentEnable or disable TACACS+ backdoor for telnet/ssh/http/https.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.17ScalartacCurCfgAuthenSecondStringread-onlycurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.18ScalartacNewCfgAuthenSecondStringread-writecurrentThe second TACACS+ authentication string.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.19ScalartacCurCfgCmdAuthorread-onlycurrentEnable or disable TACACS+ command authorization.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.20ScalartacNewCfgCmdAuthorread-writecurrentEnable or disable TACACS+ command authorization.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.21ScalartacCurCfgCmdLoggingread-onlycurrentEnable or disable TACACS+ command logging.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.22ScalartacNewCfgCmdLoggingread-writecurrentEnable or disable TACACS+ command logging.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.23ScalartacCurCfgSecBdread-onlycurrentEnable or disable TACACS+ secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.24ScalartacNewCfgSecBdread-writecurrentEnable or disable TACACS+ secure backdoor for telnet.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.25ScalartacCurCfgCmapread-onlycurrentEnable/Disable Tacacs+ new prividlege level maping.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.26ScalartacNewCfgCmapread-writecurrentEnable/Disable Tacacs+ new prividlege level maping.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31TableagTacacsUserMapCurCfgTablenot-accessiblecurrentThe table of tacacs+ user map current configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1RowagTacacsUserMapCurCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.1ColumnagTacacsUserMapCurCfgUIdread-onlycurrentThe current config remote privilege identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.2ColumnagTacacsUserMapCurCfgMappingread-onlycurrentCurrent Tacacs+ user privilege mappings.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32TableagTacacsUserMapNewCfgTablenot-accessiblecurrentThe table of tacacs+ user map new configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1RowagTacacsUserMapNewCfgTableEntrynot-accessiblecurrentA row in the tacacs+ user mapping table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.1ColumnagTacacsUserMapNewCfgUIdread-onlycurrentThe new config remote privilege identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.2ColumnagTacacsUserMapNewCfgMappingread-createcurrentSet new Tacacs+ user privilege mappings.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11NodeagMgmtNetConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.1ScalaragMgmtNetTableMaxSizeread-onlycurrentThe maximum number of entries in the Management Network Table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2TableagCurCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1RowagCurCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.1ColumnagCurCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.2ColumnagCurCfgMgmtNetSubnetread-onlycurrentThe Management Network Address in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.3ColumnagCurCfgMgmtNetMaskread-onlycurrentThe Management Network Mask in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3TableagNewCfgMgmtNetTablenot-accessiblecurrentThe table for Management Network definitions in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1RowagNewCfgMgmtNetEntrynot-accessiblecurrentA row in the management network definition table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.1ColumnagNewCfgMgmtNetIndexread-onlycurrentThe index of the Management Network Definition table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.2ColumnagNewCfgMgmtNetSubnetread-createcurrentThe Management Network Address in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.3ColumnagNewCfgMgmtNetMaskread-createcurrentThe Management Network Mask in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.4ColumnagNewCfgMgmtNetDeleteread-createcurrentBy setting the value to delete(2), the entire row is deleted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.4ScalaragMgmtNetClearread-writecurrentBy setting the value to delete(2), the entire table is cleared.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12NodeagAccess
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.1ScalaragAccessUserMaxUserIDread-onlycurrentThe maximum number of Users ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2TableagAccessUserCurCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1RowagAccessUserCurCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.1ColumnagAccessUserCurCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.2ColumnagAccessUserCurCosread-onlycurrentThe user class of service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.3ColumnagAccessUserCurCfgNameread-onlycurrentThe user name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.4ColumnagAccessUserCurCfgPswdread-onlycurrentThe character string representing the user passworde.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.5ColumnagAccessUserCurCfgStateread-onlycurrentEnable or disable a user.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3TableagAccessUserNewCfgTablenot-accessiblecurrentThe table of Access user configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1RowagAccessUserNewCfgTableEntrynot-accessiblecurrentA row in the Access user configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.1ColumnagAccessUserNewCfgUIdread-onlycurrentThe User identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.2ColumnagAccessUserNewCosread-createcurrentThe user class of service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.3ColumnagAccessUserNewCfgNameread-createcurrentThe user name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.4ColumnagAccessUserNewCfgPswdread-createcurrentThe character string representing the user passworde.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.5ColumnagAccessUserNewCfgStateread-createcurrentEnable or disable a user.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.6ColumnagAccessUserNewCfgDeleteread-createcurrentThis is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13NodeagSSHConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.1ScalarsshCurCfgIntrvalread-onlycurrentInterval for generating the RSA server key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.2ScalarsshNewCfgIntrvalread-writecurrentSet Interval for generating the RSA server key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.3ScalarsshCurCfgScpAdmread-onlycurrentSCP-only admin password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.4ScalarsshNewCfgScpAdmread-writecurrentSet SCP-only admin password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.5ScalarsshNewCfgHKeyGenread-writecurrentThis is an action object to generate the RSA host key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the RSA…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.6ScalarsshNewCfgSKeyGenread-writecurrentThis is an action object to generate the RSA server key. other(2) is returned always when read. The following values are writable: generate(1).. Generate the R…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.7ScalarsshCurCfgSSHPortread-onlycurrentSSH server port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.8ScalarsshNewCfgSSHPortread-writecurrentSet SSH server port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.9ScalarsshCurCfgScpApplySaveread-onlycurrentSCP apply and save.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.10ScalarsshNewCfgScpApplySaveread-writecurrentEnable/Disable the SCP apply and save.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.11ScalarsshCurCfgStatusread-onlycurrentSSH server status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.13.12ScalarsshNewCfgStatusread-writecurrentTurn SSH server ON/OFF.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2NodeagentStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1NodepktStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.1ScalarpktStatsAllocsread-onlycurrentTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.2ScalarpktStatsFreesread-onlycurrentTotal number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.3ScalarpktStatsAllocFailsread-onlycurrentTotal number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.4ScalarpktStatsMediumsread-onlycurrentTotal number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol sta…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.5ScalarpktStatsJumbosread-onlycurrentTotal number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.6ScalarpktStatsSmallsread-onlycurrentTotal number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.7ScalarpktStatsMediumsHiWatermarkread-onlycurrentThe highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protoc…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.8ScalarpktStatsJumbosHiWatermarkread-onlycurrentThe highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.1.9ScalarpktStatsSmallsHiWatermarkread-onlycurrentThe highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2NodempCpuStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.1ScalarmpCpuStatsUtil1Secondread-onlycurrentThe utilization of MP CPU over 1 second. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.2ScalarmpCpuStatsUtil4Secondsread-onlycurrentThe utilization of MP CPU over 4 seconds. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.2.3ScalarmpCpuStatsUtil64Secondsread-onlycurrentThe utilization of MP CPU over 64 seconds. It shows the percentage.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3NodeportStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1TableportStatsTablenot-accessiblecurrentThe table of port statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1RowportStatsTableEntrynot-accessiblecurrentA row in the port stats table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.1ColumnportStatsIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.2ColumnportStatsPhyIfInOctetsread-onlycurrentThe total number of octets received on the interface, including framing characters.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.3ColumnportStatsPhyIfInUcastPktsread-onlycurrentThe number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.4ColumnportStatsPhyIfInNUcastPktsread-onlycurrentThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.5ColumnportStatsPhyIfInDiscardsread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.6ColumnportStatsPhyIfInErrorsread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.7ColumnportStatsPhyIfInUnknownProtosread-onlycurrentThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.8ColumnportStatsPhyIfOutOctetsread-onlycurrentThe total number of octets transmitted out of the interface, including framing characters.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.9ColumnportStatsPhyIfOutUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.10ColumnportStatsPhyIfOutNUcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.11ColumnportStatsPhyIfOutDiscardsread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.12ColumnportStatsPhyIfOutErrorsread-onlycurrentThe number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.13ColumnportStatsPhyIfOutQLenread-onlycurrentThe length of the output packet queue (in packets).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.14ColumnportStatsPhyIfInBroadcastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.15ColumnportStatsPhyIfOutBroadcastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.16ColumnportStatsClearread-writecurrentSetting this value to clear(1) clears the stats for this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.17ColumnportStatsPhyIfInMulticastPktsread-onlycurrentThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.18ColumnportStatsPhyIfOutMulticastPktsread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2Tabledot1xPortStatsTablenot-accessiblecurrentThe table of 802.1x port statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1Rowdot1xPortStatsTableEntrynot-accessiblecurrentA row in the 802.1x port stats table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.1Columndot1xPortStatsIndxread-onlycurrentThe 802.1x port stats index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.2ColumneapolFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.3ColumneapolFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.4ColumneapolStartFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.5ColumneapolLogoffFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.6ColumneapolRespIdFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.7ColumneapolRespFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.8ColumneapolReqIdFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.9ColumneapolReqFramesTxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.10ColumninvalidEapolFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.11ColumneapLengthErrorFramesRxread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.12ColumnauthEntersConnectingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.13ColumnauthEapLogoffsWhileConnectingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.14ColumnauthEntersAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.15ColumnauthSuccessesWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.16ColumnauthTimeoutsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.17ColumnauthFailWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.18ColumnauthReauthsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.19ColumnauthEapStartsWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.20ColumnauthEapLogoffWhileAuthenticatingread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.21ColumnauthReauthsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.22ColumnauthEapStartsWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.23ColumnauthEapLogoffWhileAuthenticatedread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.24ColumnbackendResponsesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.25ColumnbackendAccessChallengesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.26ColumnbackendOtherRequestsToSupplicantread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.27ColumnbackendNonNakResponsesFromSupplicantread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.28ColumnbackendAuthSuccessesread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.29ColumnbackendAuthFailsread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.30ColumnlastEapolFrameVersionread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.31ColumnlastEapolFrameSourceread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3TableallportsStatsTablenot-accessiblecurrentThe table of all ports statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1RowallportsStatsTableEntrynot-accessiblecurrentA row in the table of all ports statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.1ColumnallportsStatsIndxread-onlycurrentThe port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.2ColumnallportsStatsDescrread-onlycurrentThe port description.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.3ColumnallportsStatsSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.4ColumnallportsStatsPhysAddressread-onlycurrentThe port MAC Address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.5ColumnallportsStatsAdminStatusread-onlycurrentThe port Admin state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.6ColumnallportsStatsOperStatusread-onlycurrentThe port Operational Status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.7ColumnallportsStatsInOctetsread-onlycurrentOctets In for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.8ColumnallportsStatsOutOctetsread-onlycurrentOctets Out for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.9ColumnallportsStatsInPktsread-onlycurrentPackets In for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.10ColumnallportsStatsOutPktsread-onlycurrentPackets Out for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.11ColumnallportsStatsInUcastread-onlycurrentUnicast Packets In for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.12ColumnallportsStatsOutUcastread-onlycurrentUnicast Packets Out for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.13ColumnallportsStatsInBcastread-onlycurrentBroadcasts Packets In for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.14ColumnallportsStatsOutBcastread-onlycurrentBroadcasts Packets Out for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.15ColumnallportsStatsInMcastread-onlycurrentMulticast Packets In for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.16ColumnallportsStatsOutMcastread-onlycurrentMulticast Packets Out for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.17ColumnallportsStatsInDiscardsread-onlycurrentDiscarded Packets for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.18ColumnallportsStatsOutDiscardsread-onlycurrentOutbound Packets for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.19ColumnallportsStatsInErrorsread-onlycurrentError Packets for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.20ColumnallportsStatsOutErrorsread-onlycurrentNot sent packets due to error.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.21ColumnallportsStatsInUnknownProtosread-onlycurrentUnknown protocol packets.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.22ColumnallportsStatsOutQLenread-onlycurrentOutbound Packet Queue Length.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.23ColumnallportsStatsipInReceivesread-onlycurrentIp In Receives.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.24ColumnallportsStatsipInHeaderErrorsread-onlycurrentIp In Header Errors.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.25ColumnallportsStatsipInDiscardsread-onlycurrentIp In Discards.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.26ColumnallportsStatsLinkStateChangeread-onlycurrentNumber of link state changes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.4ScalarclearPortsStatsread-writecurrentSetting this to clear(2) results in clearing the statistics for all ports.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7NodeagClearStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.7.1ScalarsnmpClearStatsread-writecurrentSetting this to clear(2) results in clearing the SNMP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9NodentpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.1ScalarntpPrimaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.2ScalarntpPrimaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.3ScalarntpPrimaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Primary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.4ScalarntpSecondaryServerReqSentread-onlycurrentThe total number of NTP requests sent to Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.5ScalarntpSecondaryServerRespRcvdread-onlycurrentThe total number of NTP responces received from Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.6ScalarntpSecondaryServerUpdatesread-onlycurrentThe total number of NTP Updates by Secondary NTP Server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.7ScalarntpLastUpdateServerread-onlycurrentThe type of ntp server updated last time.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.8ScalarntpLastUpdateTimeread-onlycurrentThe last time updated by ntp server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.9ScalarntpClearStatsread-writecurrentSetting this value to clear(2) clears the stats for ntp.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.9.10ScalarntpSystemCurrentTimeread-onlycurrentThe current system time.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12NodeaclStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1TableaclStatsTablenot-accessiblecurrentThe table of ACL statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1RowaclStatsTableEntrynot-accessiblecurrentStatistics about a particular ACL configuration entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.1ColumnaclStatsIndexread-onlycurrentThe acl index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.2ColumnaclStatsHitsread-onlycurrentTotal number of hits for this ACL entry
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.3ColumnaclClearStatsread-writecurrentSetting this value to clear(2) clears the stats for the ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3NodeagentInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1Nodehardware
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.1ScalarhwPartNumberread-onlycurrentThe hardware part number of the Bladetype2 Switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.2ScalarhwRevisionread-onlycurrentThe hardware revision. If the revision is not available, a zero length string should be returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.1.5ScalarhwSerialNumberread-onlycurrentThe switch serial number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2NodeportInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1TableportInfoTablenot-accessiblecurrentThe table of port information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1RowportInfoTableEntrynot-accessiblecurrentA row in the port information table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.1ColumnportInfoIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.2ColumnportInfoSpeedread-onlycurrentThe current operational speed of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.3ColumnportInfoModeread-onlycurrentThe current operational mode of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.4ColumnportInfoFlowCtrlread-onlycurrentThe current operational flow control of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.5ColumnportInfoLinkread-onlycurrentThe current operational link status of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.6ColumnportInfoPhyIfDescrread-onlycurrentA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.7ColumnportInfoPhyIfTyperead-onlycurrentThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.8ColumnportInfoPhyIfMturead-onlycurrentThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.9ColumnportInfoPhyIfPhysAddressread-onlycurrentThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.10ColumnportInfoPhyIfOperStatusread-onlycurrentThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.11ColumnportInfoPhyIfLastChangeread-onlycurrentThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.12ColumnportInfoMediaread-onlycurrentThe switch port media.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4NodeagDiff
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.2ScalaragDiffStateread-writecurrentWhen this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.3ScalaragDiffTableSizeread-onlycurrentThe number of strings in the diff table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4TableagDiffTablenot-accessiblecurrentThe table of URL path for URL load balancing in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1RowagDiffTableEntrynot-accessiblecurrentInformation about an URL path for URL load balancing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.1ColumnagDiffIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.2ColumnagDiffStringread-onlycurrentA string in the diff table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5NodeagCfgDump
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.2ScalaragCfgDumpStateread-writecurrentWhen this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.3ScalaragCfgDumpTableSizeread-onlycurrentThe number of strings in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4TableagCfgDumpTablenot-accessiblecurrentThe table of dump strings.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1RowagCfgDumpTableEntrynot-accessiblecurrentAn entry in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.1ColumnagCfgDumpIndexread-onlycurrentThe table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.2ColumnagCfgDumpStringread-onlycurrentA string in the dump table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7NodegeaportInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1TablegeaportInfoTablenot-accessiblecurrentThe table of gea port mapping.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1RowgeaportInfoTableEntrynot-accessiblecurrentAn entry in the geaport table mapping.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.1ColumngeaportInfoLogicalIndexread-onlycurrentThe logical port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.2ColumngeaportInfoPortread-onlycurrentThe GEA Port (0-based).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.3ColumngeaportInfoUnitread-onlycurrentThe GEA Unit.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8NodeufdInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.1ScalarufdInfoStateread-onlycurrentUplink Failure Detection State.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.2ScalarufdInfoLtMStatusread-onlycurrentLtM Status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.3ScalarufdInfoLtMPortsread-onlycurrentThe LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.4ScalarufdInfoLtMTrunksread-onlycurrentThe LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.5ScalarufdInfoLtMAdminkeyread-onlycurrentThe LtM admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.6ScalarufdInfoLtDStatusread-onlycurrentLtD status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.7ScalarufdInfoLtDPortsread-onlycurrentThe LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.8ScalarufdInfoLtDTrunksread-onlycurrentThe LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.9ScalarufdInfoLtDAdminkeyMaxEntread-onlycurrentThe maximum number of rows in the LtD admin key configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10TableufdInfoLtDAdminkeyTablenot-accessiblecurrentThe table of LtD admin key configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1RowufdInfoLtDAdminkeyTableEntrynot-accessiblecurrentA row in the LtD admin key table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1.1ColumnufdInfoLtDAdminkeyread-onlycurrentThe LtD admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9NodesfpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1TablesfpInfoTablenot-accessiblecurrentThe table of external port SFP information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1RowsfpInfoTableEntrynot-accessiblecurrentA row in the external port SFP information table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.1ColumnsfpInfoIndxread-onlycurrentThe external port SFX index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.2ColumnsfpInfoPortread-onlycurrentExternal Port SFP/XFP alias.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.3ColumnsfpInfoDeviceread-onlycurrentExternal Port SFP/XFP Device.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.4ColumnsfpInfoTXEnableread-onlycurrentExternal Port SFP/XFP TX-Enable.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.5ColumnsfpInfoRXSignalread-onlycurrentExternal Port SFP/XFP RX-Signal.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.6ColumnsfpInfoTXFaultread-onlycurrentExternal Port SFP/XFP TX-Fault.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.7ColumnsfpInfoApprovedread-onlycurrentExternal Port SFP/XFP Approval.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4NodeagentOper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1TableagPortOperTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1RowagPortOperTableEntrynot-accessiblecurrentA row in the port operations table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.1ColumnportOperIdxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.2ColumnportOperStateread-writecurrentEnable/Disable port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.3ColumnportOperRmonread-writecurrentEnable/Disable RMON for port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2NodeagNTPOper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.2.1ScalarntpOperSendReqread-writecurrentAllows the user to send requests to the NTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3TableportOperDot1xTablenot-accessiblecurrentThe table of port operations.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1RowportOperDot1xTableEntrynot-accessiblecurrentA row in the port 802.1x operation table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.1ColumnportOperDot1xIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.2ColumnportOperDot1xResetread-writecurrentReinitialize 802.1x access control on port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.3ColumnportOperDot1xReauthread-writecurrentInitiate reauthentication on port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2Nodelayer2
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1Nodelayer2Configs
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1Nodevlan
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.1ScalarvlanMaxEntread-onlycurrentThe maximum number of rows in the VLAN configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2TablevlanCurCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1RowvlanCurCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.1ColumnvlanCurCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.2ColumnvlanCurCfgVlanNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.3ColumnvlanCurCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.4ColumnvlanCurCfgStateread-onlycurrentEnable or disable a VLAN
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.6ColumnvlanCurCfgStgread-onlycurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3TablevlanNewCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1RowvlanNewCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.1ColumnvlanNewCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.2ColumnvlanNewCfgVlanNameread-createcurrentThe VLAN name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.3ColumnvlanNewCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.4ColumnvlanNewCfgStateread-createcurrentEnable or disable a VLAN
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.5ColumnvlanNewCfgAddPortread-createcurrentThe port to be added to the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.6ColumnvlanNewCfgRemovePortread-createcurrentThe port to be removed from the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.7ColumnvlanNewCfgDeleteread-createcurrentThis is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.9ColumnvlanNewCfgStgread-createcurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2Nodetrunkgroup
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.1ScalartrunkGroupTableMaxSizeread-onlycurrentThe maximum number of entries in trunk group table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2TabletrunkGroupCurCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1RowtrunkGroupCurCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.1ColumntrunkGroupCurCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.2ColumntrunkGroupCurCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.3ColumntrunkGroupCurCfgStateread-onlycurrentEnable or disable a trunk group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3TabletrunkGroupNewCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1RowtrunkGroupNewCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.1ColumntrunkGroupNewCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.2ColumntrunkGroupNewCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.3ColumntrunkGroupNewCfgAddPortread-createcurrentThe port to be added in the trunk group. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.4ColumntrunkGroupNewCfgRemovePortread-createcurrentThe port to be deleted from the trunk group. when read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.5ColumntrunkGroupNewCfgStateread-createcurrentEnable or disable a trunk group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.6ColumntrunkGroupNewCfgDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3NodestgCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1TablestgCurCfgTablenot-accessiblecurrentThe table of Spanning Tree Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1RowstgCurCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.1ColumnstgCurCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.2ColumnstgCurCfgStateread-onlycurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.5ColumnstgCurCfgPriorityread-onlycurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.6ColumnstgCurCfgBrgHelloTimeread-onlycurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.7ColumnstgCurCfgBrgForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.8ColumnstgCurCfgBrgMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.10ColumnstgCurCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OC…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2TablestgNewCfgTablenot-accessiblecurrentThe table of Spanning Tree Groups configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1RowstgNewCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.1ColumnstgNewCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.2ColumnstgNewCfgStateread-createcurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.3ColumnstgNewCfgDefaultCfgread-createcurrentSetting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.4ColumnstgNewCfgAddVlanread-createcurrentThe vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.5ColumnstgNewCfgRemoveVlanread-createcurrentThe vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.8ColumnstgNewCfgPriorityread-createcurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.9ColumnstgNewCfgBrgHelloTimeread-createcurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.10ColumnstgNewCfgBrgForwardDelayread-createcurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.11ColumnstgNewCfgBrgMaxAgeread-createcurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.13ColumnstgNewCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OC…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3TablestgCurCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1RowstgCurCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.1ColumnstgCurCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.2ColumnstgCurCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.3ColumnstgCurCfgPortStateread-onlycurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.4ColumnstgCurCfgPortPriorityread-onlycurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.5ColumnstgCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.6ColumnstgCurCfgPortLinkread-onlycurrentThe type of the port link.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.7ColumnstgCurCfgPortEdgeread-onlycurrentThe state of port edge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.8ColumnstgCurCfgPortFastFwdread-onlycurrentThe state of port fast forwarding.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4TablestgNewCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1RowstgNewCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.1ColumnstgNewCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.2ColumnstgNewCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.3ColumnstgNewCfgPortStateread-createcurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.4ColumnstgNewCfgPortPriorityread-createcurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.5ColumnstgNewCfgPortPathCostread-createcurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.6ColumnstgNewCfgPortLinkread-createcurrentThe type of the port link.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.7ColumnstgNewCfgPortEdgeread-createcurrentThe state of port edge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.8ColumnstgNewCfgPortFastFwdread-createcurrentThe state of port fast forwarding.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4Nodemirroring
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1NodemirrPortMirr
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.1ScalarpmCurCfgPortMirrStateread-onlycurrentThe state of port-based port mirroring.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.2ScalarpmNewCfgPortMirrStateread-writecurrentThe state of port-based port mirroring.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3TablepmCurCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1RowpmCurCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.1ColumnpmCurCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.2ColumnpmCurCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.3ColumnpmCurCfgPmirrDirectionread-onlycurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4TablepmNewCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1RowpmNewCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.1ColumnpmNewCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.2ColumnpmNewCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.3ColumnpmNewCfgPmirrDirectionread-createcurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.4ColumnpmNewCfgPmirrDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.10ColumnpmNewCfgPmonDeleteread-createcurrentSetting the value to delete(2) will delete the monitor port. When read, other(1) is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5NodemstCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1NodemstGeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.1ScalarmstCurCfgStateread-onlycurrentEnable or disable MSTP/RSTP
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.2ScalarmstNewCfgStateread-writecurrentEnable or disable MSTP/RSTP
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.3ScalarmstCurCfgRegionNameread-onlycurrentThe Name for the Region's configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.4ScalarmstNewCfgRegionNameread-writecurrentThe Name for the Region's configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.5ScalarmstCurCfgRegionVersionread-onlycurrentVersion of the MST Region.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.6ScalarmstNewCfgRegionVersionread-writecurrentVersion of the MST Region.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.7ScalarmstCurCfgMaxHopCountread-onlycurrentIndicates the maximum hop count value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.8ScalarmstNewCfgMaxHopCountread-writecurrentIndicates the maximum hop count value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.9ScalarmstCurCfgStpModeread-onlycurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.1.10ScalarmstNewCfgStpModeread-writecurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2NodemstCistCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.1ScalarmstCistDefaultCfgread-writecurrentSetting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2NodemstCistBridgeCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.1ScalarmstCistCurCfgBridgePriorityread-onlycurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.2ScalarmstCistNewCfgBridgePriorityread-writecurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.5ScalarmstCistCurCfgBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.6ScalarmstCistNewCfgBridgeMaxAgeread-writecurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.7ScalarmstCistCurCfgBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.8ScalarmstCistNewCfgBridgeForwardDelayread-writecurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.9ScalarmstCistCurCfgVlanBmapread-onlycurrentThe vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCT…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.10ScalarmstCistNewCfgVlanBmapread-onlycurrentThe vlans applied to the CIST group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4094. in receiving order: OCTET 1 OCT…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.2.11ScalarmstCistNewCfgAddVlanread-createcurrentThe vlan to be added to the CIST Group. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3TablemstCistCurCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1RowmstCistCurCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.1ColumnmstCistCurCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.2ColumnmstCistCurCfgPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.3ColumnmstCistCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.4ColumnmstCistCurCfgPortLinkTyperead-onlycurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if i…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.5ColumnmstCistCurCfgPortEdgeread-onlycurrentThe value of the Edge Port parameter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.6ColumnmstCistCurCfgPortStpStateread-onlycurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.7ColumnmstCistCurCfgPortHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4TablemstCistNewCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1RowmstCistNewCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.1ColumnmstCistNewCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.2ColumnmstCistNewCfgPortPriorityread-createcurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.3ColumnmstCistNewCfgPortPathCostread-createcurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.4ColumnmstCistNewCfgPortLinkTyperead-createcurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if i…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.5ColumnmstCistNewCfgPortEdgeread-createcurrentThe value of the Edge Port parameter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.6ColumnmstCistNewCfgPortStpStateread-createcurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.7ColumnmstCistNewCfgPortHelloTimeread-createcurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6Nodelacp
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.1ScalarlacpCurSystemPriorityread-onlycurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.2ScalarlacpNewSystemPriorityread-writecurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.5ScalarlacpCurSystemTimeoutTimeread-onlycurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.6ScalarlacpNewSystemTimeoutTimeread-writecurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7TablelacpCurPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1RowlacpCurPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.1ColumnlacpCurPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.2ColumnlacpCurPortStateread-onlycurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.3ColumnlacpCurPortActorPortPriorityread-onlycurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-only.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.4ColumnlacpCurPortActorAdminKeyread-onlycurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local signif…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8TablelacpNewPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1RowlacpNewPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.1ColumnlacpNewPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.2ColumnlacpNewPortStateread-writecurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.3ColumnlacpNewPortActorPortPriorityread-writecurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-write.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.4ColumnlacpNewPortActorAdminKeyread-writecurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local signi…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7Nodethash
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1NodethashL2
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.1Scalarl2ThashCurCfgSmacStateread-onlycurrentEnable or disable smac hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.2Scalarl2ThashNewCfgSmacStateread-writecurrentEnable or disable smac hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.3Scalarl2ThashCurCfgDmacStateread-onlycurrentEnable or disable dmac hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.4Scalarl2ThashNewCfgDmacStateread-writecurrentEnable or disable dmac hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.5Scalarl2ThashCurCfgSipStateread-onlycurrentEnable or disable sip hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.6Scalarl2ThashNewCfgSipStateread-writecurrentEnable or disable sip hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.7Scalarl2ThashCurCfgDipStateread-onlycurrentEnable or disable dip hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.7.1.8Scalarl2ThashNewCfgDipStateread-writecurrentEnable or disable dip hash.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8Nodel2GeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.1ScalarupfastCurCfgStateread-onlycurrentEnable or disable uplink fast
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.2ScalarupfastNewCfgStateread-writecurrentEnable or disable uplink fast
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.3ScalarupdateCurCfgStateread-onlycurrentUplinkFast station update rate: packets per second
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.4ScalarupdateNewCfgStateread-writecurrentUplinkFast station update rate: packets per second
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.9ScalarpvstCompatibilityCurCfgStateread-onlycurrentEnable or disable PVST+ compatibility
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.8.10ScalarpvstCompatibilityNewCfgStateread-writecurrentEnable or disable PVST+ compatibility
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9Nodeufd
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1NodeufdGeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.1ScalarufdCurCfgStateread-onlycurrentEnable or disable UFD state
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.2ScalarufdNewCfgStateread-writecurrentEnable or disable UFD state
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.3ScalarufdCurCfgLtMPortsread-onlycurrentThe LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.4ScalarufdNewCfgLtMPortsread-onlycurrentThe LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.5ScalarufdCurCfgLtMTrunksread-onlycurrentThe LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.6ScalarufdNewCfgLtMTrunksread-writecurrentThe LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.7ScalarufdCurCfgLtMAdminkeyread-onlycurrentThe LtM admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.8ScalarufdNewCfgLtMAdminkeyread-onlycurrentThe LtM admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.9ScalarufdCurCfgLtDPortsread-onlycurrentThe LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.10ScalarufdNewCfgLtDPortsread-onlycurrentThe LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.11ScalarufdCurCfgLtDTrunksread-onlycurrentThe LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.12ScalarufdNewCfgLtDTrunksread-writecurrentThe LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||__…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.13ScalarufdLtDAdminkeyMaxEntread-onlycurrentThe maximum number of rows in the LtD admin key configuration table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14TableufdLtDAdminkeyCurCfgTablenot-accessiblecurrentThe table of LtD admin key configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1RowufdLtDAdminkeyCurCfgTableEntrynot-accessiblecurrentA row in the LtD admin key table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1.1ColumnufdLtDAdminkeyCurCfgread-onlycurrentThe LtD admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15TableufdLtDAdminkeyNewCfgTablenot-accessiblecurrentThe table of LtD admin key configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1RowufdLtDAdminkeyNewCfgTableEntrynot-accessiblecurrentA row in the LtD admin key table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1.1ColumnufdLtDAdminkeyNewCfgread-onlycurrentThe LtD admin key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.16ScalarufdNewCfgAddLtMPortread-writecurrentThe port to be added to LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.17ScalarufdNewCfgRemoveLtMPortread-writecurrentThe port to be removed from LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.18ScalarufdNewCfgAddLtMTrunkread-writecurrentThe trunk to be added to LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.19ScalarufdNewCfgRemoveLtMTrunkread-writecurrentThe trunk to be removed from LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.20ScalarufdNewCfgAddLtMAdminkeyread-writecurrentThe admin key to be added to LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.21ScalarufdNewCfgRemoveLtMAdminkeyread-writecurrentThe admin key to be removed from LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.22ScalarufdNewCfgAddLtDPortread-writecurrentThe port to be added to LtD. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.23ScalarufdNewCfgRemoveLtDPortread-writecurrentThe port to be removed from LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.24ScalarufdNewCfgAddLtDTrunkread-writecurrentThe trunk to be added to LtM. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.25ScalarufdNewCfgRemoveLtDTrunkread-writecurrentThe trunk to be removed from LtD. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.26ScalarufdNewCfgAddLtDAdminkeyread-writecurrentThe admin key to be added to LtD. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.27ScalarufdNewCfgRemoveLtDAdminkeyread-writecurrentThe admin key to be removed from LtD. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.28ScalarufdCurCfgGlobalStateread-onlycurrentCurrent global Failover settings.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.29ScalarufdNewCfgGlobalStateread-writecurrentNew global Failover settings.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11Nodedot1x
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.1Scalardot1xCurStatusread-onlycurrentDot1x status
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.2Scalardot1xNewStatusread-writecurrentDot1x status
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3Tabledot1xCurCfgPortTablenot-accessiblecurrentThe table of 8021x configuration in the Current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1Rowdot1xCurCfgPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.1Columndot1xCurCfgPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.2Columndot1xCurCfgPortModeread-onlycurrentPort authenticaton mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.3Columndot1xCurCfgPortQtPeriodread-onlycurrentQuiet period (0-65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.4Columndot1xCurCfgPortTxPeriodread-onlycurrentTx Period
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.5Columndot1xCurCfgPortSupTmoutread-onlycurrentSupplicant timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.6Columndot1xCurCfgPortSrvTmoutread-onlycurrentServer timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.7Columndot1xCurCfgPortMaxRqread-onlycurrentMaximum numer of requests (1..10)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.8Columndot1xCurCfgPortRaPeriodread-onlycurrentReautentication period (0..604800)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.9Columndot1xCurCfgPortReAuthread-onlycurrentReAuthentication state off(0), on(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4Tabledot1xNewCfgPortTablenot-accessiblecurrentThe table of 8021x configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1Rowdot1xNewCfgPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.1Columndot1xNewCfgPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.2Columndot1xNewCfgPortModeread-createcurrentPort authentication mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.3Columndot1xNewCfgPortQtPeriodread-createcurrentQuiet period (0..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.4Columndot1xNewCfgPortTxPeriodread-createcurrentTx Period (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.5Columndot1xNewCfgPortSupTmoutread-createcurrentSupplicant Timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.6Columndot1xNewCfgPortSrvTmoutread-createcurrentServer Timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.7Columndot1xNewCfgPortMaxRqread-createcurrentMaximum number of requests (1..10)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.8Columndot1xNewCfgPortRaPeriodread-createcurrentReauthentication period (1..604800)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.9Columndot1xNewCfgPortReAuthread-createcurrentReauthentication state off(0), on(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.10Columndot1xNewCfgPortDefaultread-createcurrentPort default settings
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.11Columndot1xNewCfgPortApplyGlobalread-createcurrentApply Global config
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5Nodedot1xCurCfgGlobalTable
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.1Scalardot1xCurCfgGlobalModeread-onlycurrentAutehtication Mode forceUnauth(0), auto(1), forceAuth(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.2Scalardot1xCurCfgGlobalQtPeriodread-onlycurrentQuiet period (0..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.3Scalardot1xCurCfgGlobalTxPeriodread-onlycurrentTx period (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.4Scalardot1xCurCfgGlobalSupTmoutread-onlycurrentSupplicant timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.5Scalardot1xCurCfgGlobalSrvTmoutread-onlycurrentServer timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.6Scalardot1xCurCfgGlobalMaxRqread-onlycurrentMaximum number of requests (1..10)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.7Scalardot1xCurCfgGlobalRaPeriodread-onlycurrentReauthentication period (0..604800)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.5.8Scalardot1xCurCfgGlobalReAuthread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6Nodedot1xNewCfgGlobalTable
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.1Scalardot1xNewCfgGlobalModeread-createcurrentAuthentication Mode
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.2Scalardot1xNewCfgGlobalQtPeriodread-createcurrentQuiet Period (0..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.3Scalardot1xNewCfgGlobalTxPeriodread-createcurrentTx Period (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.4Scalardot1xNewCfgGlobalSupTmoutread-createcurrentSupplicand timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.5Scalardot1xNewCfgGlobalSrvTmoutread-createcurrentServer timeout (1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.6Scalardot1xNewCfgGlobalMaxRqread-createcurrentMaximum number of requests (1..10)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.7Scalardot1xNewCfgGlobalRaPeriodread-createcurrentReauthentication period (1..604800)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.6.8Scalardot1xNewCfgGlobalReAuthread-createcurrentReauthentication status
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12Nodefdb
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1NodefdbGeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.1ScalarfdbCurCfgAgingTimeread-onlycurrentFdb current aging time
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.1.2ScalarfdbNewCfgAgingTimeread-writecurrentFdb new aging time.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2TablefdbNewCfgStaticTablenot-accessiblecurrentThe table of FDB static entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1RowfdbNewCfgStaticEntrynot-accessiblecurrentA row in the fdb table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.1ColumnfdbNewCfgEntryIndexread-onlycurrentThe fdb entry index
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.2ColumnfdbNewCfgAddVlanread-createcurrentAdd vlan for fdb entry index
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.3ColumnfdbNewCfgAddPortread-createcurrentThe MAC address port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.4ColumnfdbNewCfgAddMacread-createcurrentAdd a fdb entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.5ColumnfdbNewCfgDelStaticEntryread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3TablefdbCurCfgStaticTablenot-accessiblecurrentThe table of FDB static entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1RowfdbCurCfgStaticEntrynot-accessiblecurrentA row in the fdb table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.1ColumnfdbCurCfgEntryIndexread-onlycurrentThe fdb entry index
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.2ColumnfdbCurCfgVlanread-onlycurrentAdd vlan for fdb entry index
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.3ColumnfdbCurCfgPortread-onlycurrentThe MAC address port number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.4ColumnfdbCurCfgMacread-onlycurrentAdd a fdb entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2Nodelayer2Stats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1NodefdbStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.3ScalarfdbStatsCurrentread-onlycurrentCurrent number of entries in the Forwarding Database.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.4ScalarfdbStatsHiwatread-onlycurrentHighest number of entries recorded at any given time in the Forwarding Database.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.1.11ScalarfdbStatsClearread-writecurrentClear FDB statistics
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2NodestpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1TablestgStatsPortTablenot-accessiblecurrentThe table of Spanning Tree Group port statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1RowstgStatsPortTableEntrynot-accessiblecurrentStatistics about port of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.1ColumnstgStatsStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.2ColumnstgStatsPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.3ColumnstgStatsPortRcvCfgBpdusread-onlycurrentNumber of Configuration BPDU's received on this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.4ColumnstgStatsPortRcvTcnBpdusread-onlycurrentNumber of TCN BPDU's received on this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.5ColumnstgStatsPortXmtCfgBpdusread-onlycurrentNumber of Configuration BPDU's trasmitted from the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.6ColumnstgStatsPortXmtTcnBpdusread-onlycurrentNumber of TCN BPDU's trasmitted from the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3NodelacpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1TablelacpStatsTablenot-accessiblecurrentThe table of LACP Stats.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1RowlacpStatsTableEntrynot-accessiblecurrentLacp status info.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.1ColumnlacpStatsIndexread-onlycurrentIndex
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.2ColumnlacpdusRxread-onlycurrentValid LACPDUs received
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.3ColumnmarkerpdusRxread-onlycurrentValid Marker PDUs received
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.4ColumnmarkerresponsepdusRxread-onlycurrentValid Marker Rsp PDUs received
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.5ColumnunknownRxread-onlycurrentUnknown version/TLV type
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.6ColumnillegalRxread-onlycurrentIllegal subtype received
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.7ColumnlacpdusTxread-onlycurrentLACPDUs transmitted
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.8ColumnmarkerpdusTxread-onlycurrentMarket PDUs transmitted
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.9ColumnmarkerresponsepdusTxread-onlycurrentMarker Rsp PDUs transmitted
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.10ColumnlacpClearStatsread-writecurrentSetting this to clear(2) results in clearing the LACP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4NodeufdStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.1ScalarufdNoLtMLinkFailureread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.2ScalarufdNoLtMLinkBlockingStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.3ScalarufdNoLtDAutoDisabledread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.4.4ScalarufdClearStatsread-writecurrentSetting this value to clear(2) clears the UFD stats.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3Nodelayer2Info
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1NodecistInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1NodecistGeneralInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.1ScalarcistRootread-onlycurrentThe bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.2ScalarcistRootPathCostread-onlycurrentThe cost of the path to the CIST Root as seen from this bridge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.3ScalarcistRootPortread-onlycurrentThe Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.4ScalarcistRootHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.5ScalarcistRootMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.6ScalarcistRootForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.7ScalarcistRegionalRootread-onlycurrentThe bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.8ScalarcistRegionalPathCostread-onlycurrentThe Cost of the path to the CIST Regional Root as seen from this bridge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.9ScalarcistBridgePriorityread-onlycurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.10ScalarcistBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.11ScalarcistBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.12ScalarcistMaxHopCountread-onlycurrentIndicates the maximum hop count value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.1.13ScalarmstpDigestread-onlycurrentThe digest of the mstp.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2TablecistInfoPortTablenot-accessiblecurrentThe table of CIST Port information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1RowcistInfoPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.1ColumncistInfoPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.2ColumncistInfoPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.3ColumncistInfoPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.4ColumncistInfoPortStateread-onlycurrentCurrent state of the Port as defined by the Common spanning tree protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.5ColumncistInfoPortRoleread-onlycurrentSelected Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.6ColumncistInfoPortDesignatedBridgeread-onlycurrentThe unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.7ColumncistInfoPortDesignatedPortread-onlycurrentThe Port identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.8ColumncistInfoPortLinkTyperead-onlycurrentThe point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a poi…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.9ColumncistInfoPortHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2NodefdbInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.1ScalarfdbClearread-writecurrentSetting this value to clear(2) clears the entire master FDB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2TablefdbTablenot-accessiblecurrentThe table of FDB entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1RowfdbEntrynot-accessiblecurrentA row in the FDB table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.1ColumnfdbMacAddrread-onlycurrentThe MAC address for the FDB entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.2ColumnfdbVlanread-onlycurrentThe VLAN ID for the FDB entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.3ColumnfdbSrcPortread-onlycurrentEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.4ColumnfdbStateread-onlycurrentThe state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.5ColumnfdbRefSpsread-onlycurrentThe referenced SPs associated with this FDB entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.6ColumnfdbLearnedPortread-onlycurrentThe learned port associated with this FDB entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.7ColumnfdbSrcTrunkread-onlycurrentEither the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.8ColumnfdbStatusread-onlycurrent'1' if it is permanent '0' if it is not permanent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3NodestpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1TablestpInfoTablenot-accessiblecurrentThe table of Spanning Tree Group information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1RowstpInfoTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.1ColumnstpInfoIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.2ColumnstpInfoStateread-onlycurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.3ColumnstgInfoVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OC…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.4ColumnstpInfoTimeSinceTopChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.5ColumnstpInfoTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.6ColumnstpInfoDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.7ColumnstpInfoRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.8ColumnstpInfoRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.9ColumnstpInfoMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.10ColumnstpInfoHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.11ColumnstpInfoForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.12ColumnstpInfoHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.13ColumnstpInfoBrgPriorityread-onlycurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.14ColumnstpInfoBrgHelloTimeread-onlycurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.15ColumnstpInfoBrgForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.16ColumnstpInfoBrgMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.17ColumnstpInfoAgingTimeread-onlycurrentThe timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2TablestpInfoPortTablenot-accessiblecurrentThe table of Spanning Tree Group port information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1RowstpInfoPortTableEntrynot-accessiblecurrentInformation about port configuration for a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.1ColumnstpInfoPortStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.2ColumnstpInfoPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.3ColumnstpInfoPortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.4ColumnstpInfoPortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.5ColumnstpInfoPortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.6ColumnstpInfoPortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.7ColumnstpInfoPortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.8ColumnstpInfoPortForwardTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.9ColumnstpInfoPortPathCostread-onlycurrentThe path cost of the port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4NodelacpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1TablelacpInfoAggrTablenot-accessiblecurrentThe table of LACP aggregator information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1RowlacpInfoAggrTableEntrynot-accessiblecurrentInformation about a LACP aggregator.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.1ColumnlacpInfoAggrIndexread-onlycurrentThe aggregator identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.2ColumnlacpInfoAggrIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.3ColumnlacpInfoAggrMacread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.4ColumnlacpInfoAggrActSysPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.5ColumnlacpInfoAggrActSysIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.6ColumnlacpInfoAggrIndivStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.7ColumnlacpInfoAggrActAdminKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.8ColumnlacpInfoAggrActOperKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.9ColumnlacpInfoAggrPartSysPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.10ColumnlacpInfoAggrPartSysIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.11ColumnlacpInfoAggrPartOperKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.12ColumnlacpInfoAggrReadyStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.13ColumnlacpInfoAggrNumPortsread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.14ColumnlacpInfoAggrPortsread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2NodelacpInfoPort
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1TablelacpInfoPortGeneralTablenot-accessiblecurrentThe table of LACP port general information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1RowlacpInfoPortGeneralTableEntrynot-accessiblecurrentGeneral information about a LACP port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.1ColumnlacpInfoPortGeneralIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.2ColumnlacpInfoPortLacpEnaread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.3ColumnlacpInfoPortAdminEnaread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.4ColumnlacpInfoPortActSysIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.5ColumnlacpInfoPortActSysPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.6ColumnlacpInfoPortActAdminKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.7ColumnlacpInfoPortActOperKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.8ColumnlacpInfoPortActPortNumread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.9ColumnlacpInfoPortActPortPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.10ColumnlacpInfoPortIndivStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.11ColumnlacpInfoSelAggrIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.12ColumnlacpInfoAttAggrIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.13ColumnlacpInfoPortReadyNread-onlycurrentTrue value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each p…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.14ColumnlacpInfoPortNttread-onlycurrentNeed to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.15ColumnlacpInfoPortSelectedread-onlycurrentSelected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.16ColumnlacpInfoPortMovedread-onlycurrentPort Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper por…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.17ColumnlacpInfoCollDetStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.18ColumnlacpInfoPortRxStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.19ColumnlacpInfoPortMuxStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.20ColumnlacpInfoPortPerStateread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2TablelacpInfoPortAdminTablenot-accessiblecurrentThe table of LACP port admin information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1RowlacpInfoPortAdminTableEntrynot-accessiblecurrentAdmin information about a LACP port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.1ColumnlacpInfoPortAdminIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.7ColumnlacpInfoPortActAdPortStateread-onlycurrentThe state of Actor Administrator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggreg…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.8ColumnlacpInfoPortActAdActivread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.9ColumnlacpInfoPortActAdSyncread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.10ColumnlacpInfoPortActAdDefread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.11ColumnlacpInfoPortActAdTimeoutread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.12ColumnlacpInfoPortActAdCollread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.13ColumnlacpInfoPortActAdExpread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.14ColumnlacpInfoPortActAdAggrread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.15ColumnlacpInfoPortActAdDistread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3TablelacpInfoPortOperTablenot-accessiblecurrentThe table of LACP port oper information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1RowlacpInfoPortOperTableEntrynot-accessiblecurrentOper information about a LACP port.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.1ColumnlacpInfoPortOperIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.2ColumnlacpInfoPortPartOpSysPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.3ColumnlacpInfoPortPartOpSysIdread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.4ColumnlacpInfoPortPartOpKeyread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.5ColumnlacpInfoPortPartOpPortNumread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.6ColumnlacpInfoPortPartOpPortPrioread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.7ColumnlacpInfoPortActOpPortStateread-onlycurrentThe state of Actor Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregation…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.8ColumnlacpInfoPortActOpActivread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.9ColumnlacpInfoPortActOpSyncread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.10ColumnlacpInfoPortActOpDefread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.11ColumnlacpInfoPortActOpTimeoutread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.12ColumnlacpInfoPortActOpCollread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.13ColumnlacpInfoPortActOpExpread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.14ColumnlacpInfoPortActOpAggrread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.15ColumnlacpInfoPortActOpDistread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.16ColumnlacpInfoPortPartOpPortStateread-onlycurrentThe state of Partner Operator Port. This is a octet mask with the following bits: Activity, Synchronization, Defaulted, Timeout, Collecting, Expired, Aggregati…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.17ColumnlacpInfoPortPartOpActivread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.18ColumnlacpInfoPortPartOpSyncread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.19ColumnlacpInfoPortPartOpDefread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.20ColumnlacpInfoPortPartOpTimeoutread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.21ColumnlacpInfoPortPartOpCollread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.22ColumnlacpInfoPortPartOpExpread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.23ColumnlacpInfoPortPartOpAggrread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.24ColumnlacpInfoPortPartOpDistread-onlycurrent
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5Nodedot1xInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1Tabledot1xInfoPortTablenot-accessiblecurrentThe table of 8021x configuration in the Current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1Rowdot1xInfoPortEntrynot-accessiblecurrentInformation about 8021x Port Config
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.1Columndot1xInfoPortIndexread-onlycurrentThe 8021x Port number for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.2Columndot1xInfoPortAuthModeread-onlycurrentAuthentication mode
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.3Columndot1xInfoPortAuthStatusread-onlycurrentAuthentication status
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.4Columndot1xInfoPortCtrlDirread-onlycurrentControlled Directions
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.5Columndot1xInfoPortAuthPAEStateread-onlycurrentAuthenticator PAE State
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.6Columndot1xInfoPortBackAuthStateread-onlycurrentBackend authenticator PAE state
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2Nodedot1xSystemInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.1Scalardot1xSystemCapabilityread-onlycurrentSystem capability
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.2Scalardot1xSystemStatusread-onlycurrentSystem status
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.2.3Scalardot1xSystemProtoVersionread-onlycurrentProtocol version
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6Nodedot1pInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1Tabledot1pInfoPriorityCOSTablenot-accessiblecurrentThe table of current priority to COS queue information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1Rowdot1pInfoPriorityCOSEntrynot-accessiblecurrentCurrent information about 8021p priority to COS queue.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.1Columndot1pInfoPriorityIndexread-onlycurrentThe 8021p priority for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.2Columndot1pInfoPriorityCOSQueueread-onlycurrentThe 8021p priority COSq.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.3Columndot1pInfoPriorityCOSWeightread-onlycurrentThe 8021p priority weight.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2Tabledot1pInfoPortTablenot-accessiblecurrentThe table of 8021p port priority configuration in the Current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1Rowdot1pInfoPortEntrynot-accessiblecurrentInformation about 8021p Port Priority
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.1Columndot1pInfoPortIndexread-onlycurrentThe 8021p Port number for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.2Columndot1pInfoPortPriorityread-onlycurrentThe 8021p Port number for which the table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.3Columndot1pInfoPortCOSqread-onlycurrentThe 8021p port COSq.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.4Columndot1pInfoPortWeightread-onlycurrentThe 8021p port weight.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7NodegenInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.1ScalargeneralInfoStpUplinkFastread-onlycurrentSTP uplink fast mode
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.7.2ScalargeneralInfoUplinkFastRateread-onlycurrentSTP fast uplink rate.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8NodevlanInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1TablevlanInfoTablenot-accessiblecurrentThe table of VLAN information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1RowvlanInfoTableEntrynot-accessiblecurrentInformation about a particular VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.1ColumnvlanInfoIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.2ColumnvlanInfoNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.3ColumnvlanInfoStatusread-onlycurrentEnable or disable, VLAN state information
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.4ColumnvlanInfoPortsread-onlycurrentThe port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9NodetrunkGroupInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1TabletrunkGroupInfoTablenot-accessiblecurrentThe table of trunk group information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1RowtrunkGroupInfoTableEntrynot-accessiblecurrentA row in trunk group information table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.1ColumntrunkGroupInfoIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.2ColumntrunkGroupInfoStateread-onlycurrentTrunk group state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.3ColumntrunkGroupInfoPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.4ColumntrunkGroupInfoProtocolread-onlycurrentTrunk group protocol Static - static trunk group Lacp - dynamic trunk group
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.5ColumntrunkGroupInfoStgsread-onlycurrentThe stg list the trunk group is in. The stgs are presented in bitmap format.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2TabletrunkGroupInfoPortTablenot-accessiblecurrentThe table of Trunk Group Info.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1RowtrunkGroupInfoPortTableEntrynot-accessiblecurrentA row in the Trunk Info table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.1ColumntrunkGroupInfoPortTrunkIdread-onlycurrentThe Trunk identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.2ColumntrunkGroupInfoPortPortIdread-onlycurrentThe Port identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.3ColumntrunkGroupInfoPortStatusread-onlycurrentThe Port Status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.4Nodelayer2Oper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3Nodelayer3
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1Nodelayer3Configs
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1NodeipInterfaceCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.1ScalaripInterfaceTableMaxread-onlycurrentThe maximum number of rows in the IP interface table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2TableipCurCfgIntfTablenot-accessiblecurrentThe table of IP interface configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1RowipCurCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.1ColumnipCurCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.2ColumnipCurCfgIntfAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.3ColumnipCurCfgIntfMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.4ColumnipCurCfgIntfBroadcastread-onlycurrentThe broadcast address of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.5ColumnipCurCfgIntfVlanread-onlycurrentThe VLAN associated with the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.6ColumnipCurCfgIntfStateread-onlycurrentThe state of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.7ColumnipCurCfgIntfBootpRelayread-onlycurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3TableipNewCfgIntfTablenot-accessiblecurrentThe table of interface configuration in the New Configuration Block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1RowipNewCfgIntfEntrynot-accessiblecurrentA row in the Ip interface table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.1ColumnipNewCfgIntfIndexread-onlycurrentThe interface number for which the IP information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.2ColumnipNewCfgIntfAddrread-createcurrentThe IP address of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.3ColumnipNewCfgIntfMaskread-createcurrentThe subnet mask of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.5ColumnipNewCfgIntfVlanread-createcurrentThe VLAN associated with the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.6ColumnipNewCfgIntfStateread-createcurrentThe state of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.7ColumnipNewCfgIntfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.8ColumnipNewCfgIntfBootpRelayread-createcurrentEnable/disable BOOTP relay.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2NodeipGatewayCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.3ScalaripGatewayTableMaxread-onlycurrentThe maximum number of rows in the IP gateway table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4TableipCurCfgGwTablenot-accessiblecurrentThe table of gateways in the Current configuration Block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1RowipCurCfgGwEntrynot-accessiblecurrentA row in the Ip gateway table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.1ColumnipCurCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.2ColumnipCurCfgGwAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.3ColumnipCurCfgGwIntervalread-onlycurrentThe interval between ping attempts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.4ColumnipCurCfgGwRetryread-onlycurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.5ColumnipCurCfgGwStateread-onlycurrentThe state of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.6ColumnipCurCfgGwArpread-onlycurrentThe state of ARP only health checks.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5TableipNewCfgGwTablenot-accessiblecurrentThe table of gateway configuration in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1RowipNewCfgGwEntrynot-accessiblecurrentA row in the Ip default gateway table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.1ColumnipNewCfgGwIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.2ColumnipNewCfgGwAddrread-createcurrentThe IP address of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.3ColumnipNewCfgGwIntervalread-createcurrentThe interval in seconds between ping attempts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.4ColumnipNewCfgGwRetryread-createcurrentThe number of failed attempts to declare the default gateway DOWN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.5ColumnipNewCfgGwStateread-createcurrentThe state of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.6ColumnipNewCfgGwDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.7ColumnipNewCfgGwArpread-createcurrentThe state of the ARP only health checks.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3NodeipStaticRouteCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.1ScalaripStaticRouteTableMaxSizeread-onlycurrentThe maximum number of rows in the Static Route table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2TableipCurCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1RowipCurCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.1ColumnipCurCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.2ColumnipCurCfgStaticRouteDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.3ColumnipCurCfgStaticRouteMaskread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.4ColumnipCurCfgStaticRouteGatewayread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.5ColumnipCurCfgStaticRouteInterfaceread-onlycurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3TableipNewCfgStaticRouteTablenot-accessiblecurrentThe table of static routes in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1RowipNewCfgStaticRouteEntrynot-accessiblecurrentA row in the static IP route table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.1ColumnipNewCfgStaticRouteIndxread-onlycurrentThe index of the static routing table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.2ColumnipNewCfgStaticRouteDestIpread-createcurrentThe destination IP address of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.3ColumnipNewCfgStaticRouteMaskread-createcurrentThe subnet mask of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.4ColumnipNewCfgStaticRouteGatewayread-createcurrentThe IP address of the gateway for this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.5ColumnipNewCfgStaticRouteActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.6ColumnipNewCfgStaticRouteInterfaceread-createcurrentThe IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.4ScalaripStaticRouteClearAllByDestIpread-writecurrentClears all static routes with the specified destination IP address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.5ScalaripStaticRouteClearAllByGatewayIpread-writecurrentClears all static routes with the specified gateway IP address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.6ScalaripStaticRouteClearAllByInterfaceread-writecurrentClears all routes on the specified inteface number.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.7ScalaripStaticRouteClearAllread-writecurrentWhen set to clear(2),clears all static routes. Otherwhise nothing is done.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4NodeipForwardCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1NodeipFwdGeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.1ScalaripFwdCurCfgStateread-onlycurrentIP forwarding global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.2ScalaripFwdNewCfgStateread-writecurrentIP forwarding global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.3ScalaripFwdCurCfgDirectedBcastread-onlycurrentEnable or disable forwarding directed broadcasts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.4.1.4ScalaripFwdNewCfgDirectedBcastread-writecurrentEnable or disable forwarding directed broadcasts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6NodevrrpCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1NodevrrpGeneral
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.1ScalarvrrpCurCfgGenStateread-onlycurrentEnable or disable VRRP operation globally.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.2ScalarvrrpNewCfgGenStateread-writecurrentEnable or disable VRRP operation globally.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.3ScalarvrrpCurCfgGenTckVirtRtrIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.4ScalarvrrpNewCfgGenTckVirtRtrIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.5ScalarvrrpCurCfgGenTckIpIntfIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.6ScalarvrrpNewCfgGenTckIpIntfIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.7ScalarvrrpCurCfgGenTckVlanPortIncread-onlycurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.1.8ScalarvrrpNewCfgGenTckVlanPortIncread-writecurrentThe increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.2ScalarvrrpVirtRtrTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP virtual router table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3TablevrrpCurCfgVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual routers configuration in current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1RowvrrpCurCfgVirtRtrTableEntrynot-accessiblecurrentInformation about a VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.1ColumnvrrpCurCfgVirtRtrIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.2ColumnvrrpCurCfgVirtRtrIDread-onlycurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.3ColumnvrrpCurCfgVirtRtrAddrread-onlycurrentThe VRRP virtual router IP address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.4ColumnvrrpCurCfgVirtRtrIfIndexread-onlycurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.5ColumnvrrpCurCfgVirtRtrIntervalread-onlycurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.6ColumnvrrpCurCfgVirtRtrPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.7ColumnvrrpCurCfgVirtRtrPreemptread-onlycurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.8ColumnvrrpCurCfgVirtRtrStateread-onlycurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.10ColumnvrrpCurCfgVirtRtrTckVirtRtrread-onlycurrentEnable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.11ColumnvrrpCurCfgVirtRtrTckIpIntfread-onlycurrentEnable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.12ColumnvrrpCurCfgVirtRtrTckVlanPortread-onlycurrentEnable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4TablevrrpNewCfgVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual routers configuration in current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1RowvrrpNewCfgVirtRtrTableEntrynot-accessiblecurrentInformation about a VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.1ColumnvrrpNewCfgVirtRtrIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.2ColumnvrrpNewCfgVirtRtrIDread-writecurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.3ColumnvrrpNewCfgVirtRtrAddrread-createcurrentThe VRRP virtual router IP address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.4ColumnvrrpNewCfgVirtRtrIfIndexread-createcurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.5ColumnvrrpNewCfgVirtRtrIntervalread-createcurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.6ColumnvrrpNewCfgVirtRtrPriorityread-createcurrentThe priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.7ColumnvrrpNewCfgVirtRtrPreemptread-createcurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.8ColumnvrrpNewCfgVirtRtrStateread-createcurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.9ColumnvrrpNewCfgVirtRtrDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.11ColumnvrrpNewCfgVirtRtrTckVirtRtrread-createcurrentEnable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.12ColumnvrrpNewCfgVirtRtrTckIpIntfread-createcurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.13ColumnvrrpNewCfgVirtRtrTckVlanPortread-createcurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.5ScalarvrrpIfTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP interface table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6TablevrrpCurCfgIfTablenot-accessiblecurrentThe table of VRRP interface configuration in current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1RowvrrpCurCfgIfTableEntrynot-accessiblecurrentInformation about a VRRP interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.1ColumnvrrpCurCfgIfIndxread-onlycurrentThe VRRP interface index. This is eqivalent to IfIndex.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.2ColumnvrrpCurCfgIfAuthTyperead-onlycurrentType of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.3ColumnvrrpCurCfgIfPasswdread-onlycurrentThe password for authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7TablevrrpNewCfgIfTablenot-accessiblecurrentThe table of VRRP interface configuration in current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1RowvrrpNewCfgIfTableEntrynot-accessiblecurrentInformation about a VRRP interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.1ColumnvrrpNewCfgIfIndxread-onlycurrentThe VRRP interface index. This is eqivalent to IfIndex.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.2ColumnvrrpNewCfgIfAuthTyperead-createcurrentType of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.3ColumnvrrpNewCfgIfPasswdread-createcurrentThe password for authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.4ColumnvrrpNewCfgIfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.8ScalarvrrpVirtRtrGrpTableMaxSizeread-onlycurrentThe maximum number of entries in VRRP Group table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9TablevrrpCurCfgVirtRtrGrpTablenot-accessiblecurrentThe table of VRRP virtual router group in current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1RowvrrpCurCfgVirtRtrGrpTableEntrynot-accessiblecurrentInformation about a VRRP failover virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.1ColumnvrrpCurCfgVirtRtrGrpIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.2ColumnvrrpCurCfgVirtRtrGrpIDread-onlycurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.3ColumnvrrpCurCfgVirtRtrGrpIfIndexread-onlycurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.4ColumnvrrpCurCfgVirtRtrGrpIntervalread-onlycurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.5ColumnvrrpCurCfgVirtRtrGrpPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.6ColumnvrrpCurCfgVirtRtrGrpPreemptread-onlycurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.7ColumnvrrpCurCfgVirtRtrGrpStateread-onlycurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.10ColumnvrrpCurCfgVirtRtrGrpTckIpIntfread-onlycurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.11ColumnvrrpCurCfgVirtRtrGrpTckVlanPortread-onlycurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10TablevrrpNewCfgVirtRtrGrpTablenot-accessiblecurrentThe table of VRRP virtual router group configuration in new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1RowvrrpNewCfgVirtRtrGrpTableEntrynot-accessiblecurrentInformation about a VRRP failover virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.1ColumnvrrpNewCfgVirtRtrGrpIndxread-onlycurrentThe VRRP virtual router table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.2ColumnvrrpNewCfgVirtRtrGrpIDread-createcurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.3ColumnvrrpNewCfgVirtRtrGrpIfIndexread-createcurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.4ColumnvrrpNewCfgVirtRtrGrpIntervalread-createcurrentThe time interval between VRRP advertisements in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.5ColumnvrrpNewCfgVirtRtrGrpPriorityread-createcurrentThe priority value to be used by the specified VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.6ColumnvrrpNewCfgVirtRtrGrpPreemptread-createcurrentThis is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohib…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.7ColumnvrrpNewCfgVirtRtrGrpStateread-createcurrentEnable or disable the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.8ColumnvrrpNewCfgVirtRtrGrpDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.11ColumnvrrpNewCfgVirtRtrGrpTckIpIntfread-createcurrentEnable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.12ColumnvrrpNewCfgVirtRtrGrpTckVlanPortread-createcurrentEnable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7NodearpCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.1ScalararpCurCfgReARPPeriodread-onlycurrentRe-ARP Period in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.2ScalararpNewCfgReARPPeriodread-writecurrentRe-ARP Period in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.3ScalaripStaticArpTableMaxSizeread-onlycurrentThe maximum number of rows in the Static ARP table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4TableipCurCfgStaticArpTablenot-accessiblecurrentThe table of static ARPs in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1RowipCurCfgStaticArpEntrynot-accessiblecurrentA row in the static ARP table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.1ColumnipCurCfgStaticArpIndxread-onlycurrentThe index of the static ARP table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.2ColumnipCurCfgStaticArpIpread-onlycurrentThe IP address for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.3ColumnipCurCfgStaticArpMACread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.4ColumnipCurCfgStaticArpVlanread-onlycurrentThe VLAN for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.5ColumnipCurCfgStaticArpPortread-onlycurrentThe port for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5TableipNewCfgStaticArpTablenot-accessiblecurrentThe table of static ARPs in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1RowipNewCfgStaticArpEntrynot-accessiblecurrentA row in the static ARP table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.1ColumnipNewCfgStaticArpIndxread-onlycurrentThe index of the static ARP table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.2ColumnipNewCfgStaticArpIpread-createcurrentThe IP address for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.3ColumnipNewCfgStaticArpMACread-createcurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.4ColumnipNewCfgStaticArpVlanread-createcurrentThe VLAN for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.5ColumnipNewCfgStaticArpPortread-createcurrentThe port for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.6ColumnipNewCfgStaticArpActionread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8NodeipBootpCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.1ScalaripCurCfgBootpAddrread-onlycurrentThe IP address of BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.2ScalaripNewCfgBootpAddrread-writecurrentThe IP address of BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.3ScalaripCurCfgBootpAddr2read-onlycurrentThe IP address of second BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.4ScalaripNewCfgBootpAddr2read-writecurrentThe IP address of second BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.5ScalaripCurCfgBootpStateread-onlycurrentThe state of BOOTP relay.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.8.6ScalaripNewCfgBootpStateread-writecurrentThe state of BOOTP relay.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9NodednsCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.1ScalardnsCurCfgPrimaryIpAddrread-onlycurrentThe DNS primary IP address in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.2ScalardnsNewCfgPrimaryIpAddrread-writecurrentThe DNS primary IP address in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.3ScalardnsCurCfgSecondaryIpAddrread-onlycurrentThe DNS primary IP address in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.4ScalardnsNewCfgSecondaryIpAddrread-writecurrentThe DNS primary IP address in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.5ScalardnsCurCfgDomainNameread-onlycurrentThe DNS doamin name in the current_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.9.6ScalardnsNewCfgDomainNameread-writecurrentThe DNS doamin name in the new_configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10NodeipNwfCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.1ScalaripNwfTableMaxread-onlycurrentThe maximum number of rows in the IP network filter table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2TableipCurCfgNwfTablenot-accessiblecurrentThe table of IP network filter configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1RowipCurCfgNwfEntrynot-accessiblecurrentInformation about an IP network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.1ColumnipCurCfgNwfIndexread-onlycurrentThe netowrk filter number for which the NWF is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.2ColumnipCurCfgNwfAddrread-onlycurrentThe IP address of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.3ColumnipCurCfgNwfMaskread-onlycurrentThe subnet mask of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.4ColumnipCurCfgNwfStateread-onlycurrentEnable or disable the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3TableipNewCfgNwfTablenot-accessiblecurrentThe table of IP network filter configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1RowipNewCfgNwfEntrynot-accessiblecurrentInformation about an IP network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.1ColumnipNewCfgNwfIndexread-onlycurrentThe netowrk filter number for which the NWF is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.2ColumnipNewCfgNwfAddrread-createcurrentThe IP address of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.3ColumnipNewCfgNwfMaskread-createcurrentThe subnet mask of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.4ColumnipNewCfgNwfStateread-createcurrentEnable or disable the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.5ColumnipNewCfgNwfDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11NodeipRmapCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.1ScalaripRmapTableMaxread-onlycurrentThe maximum number of rows in the IP route map table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2TableipCurCfgRmapTablenot-accessiblecurrentThe table of IP route map configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1RowipCurCfgRmapEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.1ColumnipCurCfgRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.3ColumnipCurCfgRmapMetricread-onlycurrentThe metric of the route map. 4294967295 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.4ColumnipCurCfgRmapPrecread-onlycurrentThe precedence of the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.6ColumnipCurCfgRmapStateread-onlycurrentEnable or disable the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.8ColumnipCurCfgRmapMetricTyperead-onlycurrentThe OSPF metric-type of the matched route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3TableipNewCfgRmapTablenot-accessiblecurrentThe table of IP route map configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1RowipNewCfgRmapEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.1ColumnipNewCfgRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.3ColumnipNewCfgRmapMetricread-createcurrentThe metric of the route map. 16777215 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.4ColumnipNewCfgRmapPrecread-createcurrentThe precedence of the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.6ColumnipNewCfgRmapStateread-createcurrentEnable or disable the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.8ColumnipNewCfgRmapMetricTyperead-createcurrentThe OSPF metric-type of the matched route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.9ColumnipNewCfgRmapDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.4ScalaripAlistTableMaxread-onlycurrentThe maximum number of rows in the IP route map table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5TableipCurCfgAlistTablenot-accessiblecurrentThe table of IP route map access list configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1RowipCurCfgAlistEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.1ColumnipCurCfgAlistRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.2ColumnipCurCfgAlistIndexread-onlycurrentThe access list number for which the access list is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.3ColumnipCurCfgAlistNwfread-onlycurrentThe network filter number of the route map access list. 0 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.4ColumnipCurCfgAlistMetricread-onlycurrentThe metric of the route map access list. 4294967295 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.5ColumnipCurCfgAlistActionread-onlycurrentAction of the route map access list.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.6ColumnipCurCfgAlistStateread-onlycurrentEnable or disable the route map access list.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6TableipNewCfgAlistTablenot-accessiblecurrentThe table of IP route map access list configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1RowipNewCfgAlistEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.1ColumnipNewCfgAlistRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.2ColumnipNewCfgAlistIndexread-onlycurrentThe access list number for which the access list is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.3ColumnipNewCfgAlistNwfread-createcurrentThe network filter number of the route map access list. 0 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.4ColumnipNewCfgAlistMetricread-createcurrentThe metric of the route map access list. 16777215 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.5ColumnipNewCfgAlistActionread-createcurrentAction of the route map access list.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.6ColumnipNewCfgAlistStateread-createcurrentEnable or disable the route map access list.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.7ColumnipNewCfgAlistDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13NodeospfCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1NodeospfGeneral
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.1ScalarospfCurCfgDefaultRouteMetricread-onlycurrentSpecify the metric to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.2ScalarospfNewCfgDefaultRouteMetricread-writecurrentSpecify the metric to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.3ScalarospfCurCfgDefaultRouteMetricTyperead-onlycurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.4ScalarospfNewCfgDefaultRouteMetricTyperead-writecurrentSpecify the AS External metric type to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.5ScalarospfIntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Interface table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.6ScalarospfAreaTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Area table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.7ScalarospfRangeTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Range table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.8ScalarospfVirtIntfTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Virtual Interface table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.9ScalarospfHostTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Host table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.10ScalarospfCurCfgStateread-onlycurrentOSPF global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.11ScalarospfNewCfgStateread-writecurrentGlobally turn OSPF on or off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.12ScalarospfCurCfgLSDBread-onlycurrentThe LSDB limit for external LSA.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.1.13ScalarospfNewCfgLSDBread-writecurrentSet the LSDB limit for external LSA.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2TableospfCurCfgAreaTablenot-accessiblecurrentThe table of OSPF Area configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1RowospfCurCfgAreaEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.1ColumnospfCurCfgAreaIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.2ColumnospfCurCfgAreaIdread-onlycurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.3ColumnospfCurCfgAreaSpfIntervalread-onlycurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.4ColumnospfCurCfgAreaAuthTyperead-onlycurrentType of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.5ColumnospfCurCfgAreaTyperead-onlycurrentType of Area. transit(0) stub(1) nssa(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.6ColumnospfCurCfgAreaMetricread-onlycurrentMetric (1-65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.7ColumnospfCurCfgAreaStatusread-onlycurrentStatus disabled(0) enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3TableospfNewCfgAreaTablenot-accessiblecurrentThe table of OSPF Area configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1RowospfNewCfgAreaEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.1ColumnospfNewCfgAreaIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.2ColumnospfNewCfgAreaIdread-createcurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.3ColumnospfNewCfgAreaSpfIntervalread-writecurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.4ColumnospfNewCfgAreaAuthTyperead-writecurrentType of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.5ColumnospfNewCfgAreaTyperead-writecurrentType of Area. transit(0) stub(1) nssa(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.6ColumnospfNewCfgAreaMetricread-writecurrentMetric (1-65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.7ColumnospfNewCfgAreaStatusread-writecurrentStatus disabled(0) enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.8ColumnospfNewCfgAreaDeleteread-writecurrentDelete the area no(0), yes(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4NodeospfRouteRedistribution
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1NodeospfRedistributeStatic
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.1ScalarospfCurCfgStaticMetricread-onlycurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.2ScalarospfNewCfgStaticMetricread-writecurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.3ScalarospfCurCfgStaticMetricTyperead-onlycurrentThe AS External metric type for static routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.4ScalarospfNewCfgStaticMetricTyperead-writecurrentThe AS External metric type for static routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.5ScalarospfCurCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.6ScalarospfNewCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.7ScalarospfNewCfgStaticAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.1.8ScalarospfNewCfgStaticRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4NodeospfRedistributeFixed
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.1ScalarospfCurCfgFixedMetricread-onlycurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.2ScalarospfNewCfgFixedMetricread-writecurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.3ScalarospfCurCfgFixedMetricTyperead-onlycurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.4ScalarospfNewCfgFixedMetricTyperead-writecurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.5ScalarospfCurCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.6ScalarospfNewCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.7ScalarospfNewCfgFixedAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.4.8ScalarospfNewCfgFixedRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5NodeospfRedistributeRip
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.1ScalarospfCurCfgRipMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.2ScalarospfNewCfgRipMetricread-writecurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.3ScalarospfCurCfgRipMetricTyperead-onlycurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.4ScalarospfNewCfgRipMetricTyperead-writecurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.5ScalarospfCurCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.6ScalarospfNewCfgRipOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.7ScalarospfNewCfgRipAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.4.5.8ScalarospfNewCfgRipRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5TableospfCurCfgMdkeyTablenot-accessiblecurrentThe table of OSPF MD5 keys in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1RowospfCurCfgMdkeyEntrynot-accessiblecurrentInformation about an OSPF MD keys table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.1ColumnospfCurCfgMdkeyIndexread-onlycurrentThe OSPF MD5 Key number for which the OSPF MdKey table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.2ColumnospfCurCfgMdkeyKeyread-onlycurrentThe character string representing the MD5 Key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6TableospfNewCfgMdkeyTablenot-accessiblecurrentThe table of OSPF MD5 keys in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1RowospfNewCfgMdkeyEntrynot-accessiblecurrentInformation about an OSPF MD keys table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.1ColumnospfNewCfgMdkeyIndexread-onlycurrentThe OSPF MD5 Key number for which the OSPF MdKey table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.2ColumnospfNewCfgMdkeyKeyread-createcurrentThe character string representing the MD5 Key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.3ColumnospfNewCfgMdkeyDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7TableospfCurCfgIntfTablenot-accessiblecurrentThe table of OSPF Interface configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1RowospfCurCfgIntfEntrynot-accessiblecurrentInformation about an OSPF Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.1ColumnospfCurCfgIntfIndexread-onlycurrentThe OSPF Interface number for which the OSPF Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.2ColumnospfCurCfgIntfIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.3ColumnospfCurCfgIntfArearead-onlycurrentThe index of the area that the interface belongs
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.4ColumnospfCurCfgIntfMdkeyread-onlycurrentThe MD5 key for the OSPF interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.5ColumnospfCurCfgIntfCostread-onlycurrentInterface cost
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.6ColumnospfCurCfgIntfPrioread-onlycurrentInterface router priority
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.7ColumnospfCurCfgIntfHelloread-onlycurrentHello interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.8ColumnospfCurCfgIntfDeadread-onlycurrentDead interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.9ColumnospfCurCfgIntfTransread-onlycurrentTransit delay
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.10ColumnospfCurCfgIntfRetraread-onlycurrentRetransmit interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.11ColumnospfCurCfgIntfAuthKeyread-onlycurrentAuthentication Key
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.12ColumnospfCurCfgIntfStatusread-onlycurrentStatus of the interface disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8TableospfNewCfgIntfTablenot-accessiblecurrentThe table of OSPF Interface configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1RowospfNewCfgIntfEntrynot-accessiblecurrentInformation about an OSPF Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.1ColumnospfNewCfgIntfIndexread-onlycurrentThe OSPF Interface number for which the OSPF Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.2ColumnospfNewCfgIntfIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.3ColumnospfNewCfgIntfArearead-createcurrentThe index of the area that the interface belongs (0..2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.4ColumnospfNewCfgIntfMdkeyread-createcurrentThe MD5 key for the OSPF interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.5ColumnospfNewCfgIntfCostread-createcurrentInterface cost(1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.6ColumnospfNewCfgIntfPrioread-createcurrentInterface router priority(0..255)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.7ColumnospfNewCfgIntfHelloread-createcurrentHello interval(1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.8ColumnospfNewCfgIntfDeadread-createcurrentDead interval(1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.9ColumnospfNewCfgIntfTransread-createcurrentTransit delay(1..3600)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.10ColumnospfNewCfgIntfRetraread-createcurrentRetransmit interval(1..3600)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.11ColumnospfNewCfgIntfAuthKeyread-createcurrentAuthentication Key
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.12ColumnospfNewCfgIntfStatusread-createcurrentStatus of the interface disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.13ColumnospfNewCfgIntfDeleteread-writecurrentDelete the interface other(0), delete(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9TableospfCurCfgVirtIntfTablenot-accessiblecurrentThe table of OSPF Virtual Interface configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1RowospfCurCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPF virtual Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.1ColumnospfCurCfgVirtIntfIndexread-onlycurrentThe OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.2ColumnospfCurCfgVirtIntfAreaIdread-onlycurrentThe index of the OSPF area to which this virtual interface belongs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.3ColumnospfCurCfgVirtIntfNbrread-onlycurrentThe IP Address of the OSPF neighbor for this virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.4ColumnospfCurCfgVirtIntfMdkeyread-onlycurrentThe MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.5ColumnospfCurCfgVirtIntfHelloread-onlycurrentHello interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.6ColumnospfCurCfgVirtIntfDeadread-onlycurrentDead interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.7ColumnospfCurCfgVirtIntfTransread-onlycurrentTransit delay
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.8ColumnospfCurCfgVirtIntfRetraread-onlycurrentRetransmit interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.9ColumnospfCurCfgVirtIntfAuthKeyread-onlycurrentAuthentication Key
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.10ColumnospfCurCfgVirtIntfStatusread-onlycurrentStatus disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10TableospfNewCfgVirtIntfTablenot-accessiblecurrentThe table of OSPF Virtual Interface configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1RowospfNewCfgVirtIntfEntrynot-accessiblecurrentInformation about an OSPF virtual Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.1ColumnospfNewCfgVirtIntfIndexread-onlycurrentThe OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.2ColumnospfNewCfgVirtIntfAreaIdread-createcurrentThe index of the OSPF area to which this virtual interface belongs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.3ColumnospfNewCfgVirtIntfNbrread-createcurrentThe IP Address of the OSPF neighbor for this virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.4ColumnospfNewCfgVirtIntfMdkeyread-createcurrentThe MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.5ColumnospfNewCfgVirtIntfHelloread-createcurrentHello interval(1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.6ColumnospfNewCfgVirtIntfDeadread-createcurrentDead interval(1..65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.7ColumnospfNewCfgVirtIntfTransread-createcurrentTransit dela(1..3600)y
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.8ColumnospfNewCfgVirtIntfRetraread-createcurrentRetransmit interval(1..3600)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.9ColumnospfNewCfgVirtIntfAuthKeyread-createcurrentAuthentication Key SIZE(0..8)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.10ColumnospfNewCfgVirtIntfStatusread-createcurrentStatus disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.11ColumnospfNewCfgVirtIntfDeleteread-writecurrentDelete other(0), delete(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.11ScalarospfMdkeyTableMaxSizeread-onlycurrentThe maximum number of rows in the OSPF Mdkey table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12TableospfCurCfgHostTablenot-accessiblecurrentThe table of OSPF Host configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1RowospfCurCfgHostEntrynot-accessiblecurrentInformation about a OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.1ColumnospfCurCfgHostIndexread-onlycurrentThe OSPF host number for which the OSPF host table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.2ColumnospfCurCfgHostIpAddrread-onlycurrentThe IP Address of the OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.3ColumnospfCurCfgHostAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.4ColumnospfCurCfgHostCostread-onlycurrentThe cost of the OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.5ColumnospfCurCfgHostStateread-onlycurrentEnable or disable an OSPF Host
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13TableospfNewCfgHostTablenot-accessiblecurrentThe table of OSPF Host configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1RowospfNewCfgHostEntrynot-accessiblecurrentInformation about a OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.1ColumnospfNewCfgHostIndexread-onlycurrentThe OSPF host number for which the OSPF host table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.2ColumnospfNewCfgHostIpAddrread-createcurrentThe IP Address of the OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.3ColumnospfNewCfgHostAreaIndexread-createcurrentThe OSPF area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.4ColumnospfNewCfgHostCostread-createcurrentThe cost of the OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.5ColumnospfNewCfgHostStateread-createcurrentEnable or disable an OSPF Host
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.6ColumnospfNewCfgHostDeleteread-writecurrentDelete the OSPF host: no(0), yes(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14TableospfCurCfgRangeTablenot-accessiblecurrentThe table of OSPF summary range in the current configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1RowospfCurCfgRangeEntrynot-accessiblecurrentInformation about an OSPF summary range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.1ColumnospfCurCfgRangeIndexread-onlycurrentThe range number for which the OSPF summary range table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.2ColumnospfCurCfgRangeAddrread-onlycurrentThe IP Address of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.3ColumnospfCurCfgRangeMaskread-onlycurrentThe mask of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.4ColumnospfCurCfgRangeAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.5ColumnospfCurCfgRangeHideStateread-onlycurrentThe state of the hide range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.6ColumnospfCurCfgRangeStateread-onlycurrentThe state of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15TableospfNewCfgRangeTablenot-accessiblecurrentThe table of OSPF summary range in the new configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1RowospfNewCfgRangeEntrynot-accessiblecurrentInformation about an OSPF summary range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.1ColumnospfNewCfgRangeIndexread-onlycurrentThe range number for which the OSPF summary range table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.2ColumnospfNewCfgRangeAddrread-createcurrentThe IP Address of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.3ColumnospfNewCfgRangeMaskread-createcurrentThe mask of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.4ColumnospfNewCfgRangeAreaIndexread-createcurrentThe area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.5ColumnospfNewCfgRangeHideStateread-createcurrentThe state of the hide range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.6ColumnospfNewCfgRangeStateread-createcurrentThe state of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.7ColumnospfNewCfgRangeDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14NodeipGeneralCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.1ScalaripCurCfgRouterIDread-onlycurrentThe router ID of the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.14.2ScalaripNewCfgRouterIDread-writecurrentThe router ID of the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15NodeigmpCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.1ScalarigmpCurCfgOnOffread-onlycurrentGlobally turn IGMP On/Off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.2ScalarigmpNewCfgOnOffread-writecurrentGlobally turn IGMP On/Off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3NodeigmpSnoopCfgGen
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1NodeigmpSnoopCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.1ScalarigmpSnoopCurCfgTimeoutread-onlycurrentSet IGMP Report timeout.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.2ScalarigmpSnoopNewCfgTimeoutread-writecurrentSet IGMP Report timeout.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.3ScalarigmpSnoopCurCfgMrtoread-onlycurrentThe value of multicast router timeout in the current config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.4ScalarigmpSnoopNewCfgMrtoread-writecurrentThe value of multicast router timeout in the new config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.12ScalarigmpSnoopNewCfgVlanFastlvAddread-writecurrentThe VLAN to be added to fastleave vlan list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.13ScalarigmpSnoopNewCfgVlanFastlvRemread-writecurrentThe VLAN to be removed from fastleave vlan list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.14ScalarigmpSnoopCurCfgVlanFastlvBmapread-onlycurrentThe fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.15ScalarigmpSnoopNewCfgVlanFastlvBmapread-onlycurrentThe fastlv enabled vlans present in the in vlan map list. The fastlv enabled vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.16ScalarigmpSnoopCurCfgRobustread-onlycurrentThe value of expected packet loss on subnet in the current config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.17ScalarigmpSnoopNewCfgRobustread-writecurrentThe value of expected packet loss on subnet in the new config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.18ScalarigmpSnoopNewCfgVlanAddread-writecurrentThe VLAN to be added to snooping vlan list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.19ScalarigmpSnoopNewCfgVlanRemread-writecurrentThe VLAN to be removed from snooping vlan list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.20ScalarigmpSnoopNewCfgVlanClearread-writecurrentRemoving ALL Snooping Vlans.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.21ScalarigmpSnoopCurCfgVlanBmapread-onlycurrentThe snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxx…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.22ScalarigmpSnoopNewCfgVlanBmapread-onlycurrentThe snooping vlans present in the in vlan map list. The snooping vlans are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxx…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.23ScalarigmpSnoopCurCfgQIntervalread-onlycurrentIGMP Query Interval of current config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.24ScalarigmpSnoopNewCfgQIntervalread-writecurrentIGMP Query Interval of new config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.25ScalarigmpSnoopCurCfgSrcIpread-onlycurrentThe source ip for GSQ proxy in current config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.26ScalarigmpSnoopNewCfgSrcIpread-writecurrentThe source ip for GSQ proxy in new config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.27ScalarigmpSnoopCurCfgAggrEnaDisread-onlycurrentEnable/Disable of IGMP Report aggregation.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.28ScalarigmpSnoopNewCfgAggrEnaDisread-writecurrentEnable/Disable of IGMP Report aggregation.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.29ScalarigmpSnoopCurCfgFloodread-onlycurrentEnable/Disable of flood unregistered IPMC
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.3.1.30ScalarigmpSnoopNewCfgFloodread-writecurrentEnable/Disable of flood unregistered IPMC
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4NodeigmpStaticMrtrCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1TableigmpStaticMrtrCurCfgTablenot-accessiblecurrentThe IGMP Static Multicast Router table in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1RowigmpStaticMrtrCurCfgTableEntrynot-accessiblecurrentA row in the Static Multicast Router table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.1ColumnigmpStaticMrtrCurCfgIndxread-onlycurrentThe IGMP Multicast Router table port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.2ColumnigmpStaticMrtrCurCfgPortIdread-onlycurrentThe IGMP Multicast Router port in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.3ColumnigmpStaticMrtrCurCfgVlanIdread-onlycurrentThe IGMP Multicast Router port in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.4ColumnigmpStaticMrtrCurCfgVersionread-onlycurrentThe IGMP version of the IGMP Static Multicast Router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2TableigmpStaticMrtrNewCfgTablenot-accessiblecurrentThe IGMP Static Multicast Router table in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1RowigmpStaticMrtrNewCfgTableEntrynot-accessiblecurrentA row in the Static Multicast Router table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.1ColumnigmpStaticMrtrNewCfgIndxread-onlycurrentThe IGMP Multicast Router table port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.2ColumnigmpStaticMrtrNewCfgPortIdread-createcurrentThe IGMP Multicast Router port in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.3ColumnigmpStaticMrtrNewCfgVlanIdread-createcurrentThe IGMP Multicast Router port in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.4ColumnigmpStaticMrtrNewCfgVersionread-createcurrentThe IGMP version of the IGMP Static Multicast Router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.5ColumnigmpStaticMrtrNewCfgDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5NodeigmpFilterCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1TableigmpFltCurCfgTablenot-accessiblecurrentThe IGMP filtering table in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1RowigmpFltCurCfgTableEntrynot-accessiblecurrentA row in the filtering table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.1ColumnigmpFltCurCfgIndxread-onlycurrentThe IGMP filter table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.2ColumnigmpFltCurCfgMcastIp1read-onlycurrentRange1 Multicast IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.3ColumnigmpFltCurCfgMcastIp2read-onlycurrentRange2 Multicast IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.4ColumnigmpFltCurCfgActionread-onlycurrentThe action for the IGMP filtering rule.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.5ColumnigmpFltCurCfgStateread-onlycurrentThe state of this IGMP filtering rule.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2TableigmpFltNewCfgTablenot-accessiblecurrentThe IGMP filtering table in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1RowigmpFltNewCfgTableEntrynot-accessiblecurrentA row in the filtering table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.1ColumnigmpFltNewCfgIndxread-onlycurrentThe IGMP filter table index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.2ColumnigmpFltNewCfgMcastIp1read-createcurrentRange1 Multicast source IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.3ColumnigmpFltNewCfgMcastIp2read-createcurrentRange2 Multicast source IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.4ColumnigmpFltNewCfgActionread-createcurrentThe action for the IGMP filtering rule.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.5ColumnigmpFltNewCfgStateread-createcurrentThe state of this IGMP filtering rule.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.6ColumnigmpFltNewCfgDeleteread-createcurrentWhen set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3TableigmpFltCurCfgPortTablenot-accessiblecurrentThe IGMP filtering port table in the current configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1RowigmpFltCurCfgPortTableEntrynot-accessiblecurrentA row in the IGMP filtering port table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.1ColumnigmpFltCurCfgPortIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.2ColumnigmpFltCurCfgPortStateread-onlycurrentEnable or disable IGMP filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.3ColumnigmpFltCurCfgPortFiltBmapread-onlycurrentThe IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4TableigmpFltNewCfgPortTablenot-accessiblecurrentThe IGMP filtering port table in the new configuration block.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1RowigmpFltNewCfgPortTableEntrynot-accessiblecurrentA row in the IGMP filtering port table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.1ColumnigmpFltNewCfgPortIndxread-onlycurrentThe port index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.2ColumnigmpFltNewCfgPortStateread-createcurrentEnable or disable IGMP filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.3ColumnigmpFltNewCfgPortFiltBmapread-onlycurrentThe IGMP filtering rules applied to the port. The filtering rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx .…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.4ColumnigmpFltNewCfgPortAddFiltRuleread-createcurrentThis is an action object to add filtering rule to a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule to b…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.5ColumnigmpFltNewCfgPortRemFiltRuleread-createcurrentThis is an action object to remove filtering rule from a port. The value specified with this object is the index to the fltNewCfgTable for which filtering rule…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.5ScalarigmpFltCurCfgEnaDisread-onlycurrentEnable/Disable of IGMP Filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.6ScalarigmpFltNewCfgEnaDisread-writecurrentEnable/Disable of IGMP Filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18Noderip2Cfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1TableripCurCfgIntfTablenot-accessiblecurrentThe table of RIP on IP interface configuration in the current_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1RowripCurCfgIntfEntrynot-accessiblecurrentInformation about RIP on IP interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.1ColumnripCurCfgIntfIndexread-onlycurrentThe interface number for which the RIP information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.2ColumnripCurCfgIntfVersionread-onlycurrentRIP version.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.3ColumnripCurCfgIntfSupplyread-onlycurrentEnable or disable supplying route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.4ColumnripCurCfgIntfListenread-onlycurrentEnable or disable listening to route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.5ColumnripCurCfgIntfDefaultread-onlycurrentSpecifies what RIP does with default routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.6ColumnripCurCfgIntfTrigUpdateread-onlycurrentEnable or disable tirggered updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.7ColumnripCurCfgIntfMcastUpdateread-onlycurrentEnable or disable multicast updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.8ColumnripCurCfgIntfPoisonReverseread-onlycurrentRIP poison reverse.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.9ColumnripCurCfgIntfStateread-onlycurrentEnable or disable RIP protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.10ColumnripCurCfgIntfMetricread-onlycurrentRIP route metric for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.11ColumnripCurCfgIntfAuthread-onlycurrentEnable or disable RIP update authorization with a simple plain text password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.12ColumnripCurCfgIntfKeyread-onlycurrentRIP update authentication password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.13ColumnripCurCfgIntfSplitHorizonread-onlycurrentRIP split horizon.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2TableripNewCfgIntfTablenot-accessiblecurrentThe table of RIP on IP interface configuration in the new_config.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1RowripNewCfgIntfEntrynot-accessiblecurrentInformation about RIP on IP interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.1ColumnripNewCfgIntfIndexread-onlycurrentThe interface number for which the RIP information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.2ColumnripNewCfgIntfVersionread-writecurrentRIP version.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.3ColumnripNewCfgIntfSupplyread-writecurrentEnable or disable supplying route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.4ColumnripNewCfgIntfListenread-writecurrentEnable or disable listening to route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.5ColumnripNewCfgIntfDefaultread-createcurrentSpecifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.6ColumnripNewCfgIntfTrigUpdateread-writecurrentEnable or disable tirggered updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.7ColumnripNewCfgIntfMcastUpdateread-writecurrentEnable or disable multicast updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.8ColumnripNewCfgIntfPoisonReverseread-writecurrentRIP poison reverse.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.9ColumnripNewCfgIntfStateread-createcurrentEnable or disable RIP protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.10ColumnripNewCfgIntfMetricread-writecurrentRIP route metric for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.11ColumnripNewCfgIntfAuthread-writecurrentEnable or disable RIP update authorization with a simple plain text password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.12ColumnripNewCfgIntfKeyread-createcurrentRIP update authentication password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.13ColumnripNewCfgIntfSplitHorizonread-writecurrentRIP split horizon.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3NoderipGeneral
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.1Scalarrip2CurCfgStateread-onlycurrentRIP global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.2Scalarrip2NewCfgStateread-writecurrentGlobally turn RIP on or off.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.3Scalarrip2CurCfgUpdatePeriodread-onlycurrentUpdate Period in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.3.4Scalarrip2NewCfgUpdatePeriodread-writecurrentUpdate Period in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4NoderipRouteRedistribution
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1NoderipRedistributeStatic
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.1ScalarripCurCfgStaticMetricread-onlycurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.2ScalarripNewCfgStaticMetricread-writecurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.5ScalarripCurCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.6ScalarripNewCfgStaticOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.7ScalarripNewCfgStaticAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.1.8ScalarripNewCfgStaticRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4NoderipRedistributeFixed
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.1ScalarripCurCfgFixedMetricread-onlycurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.2ScalarripNewCfgFixedMetricread-writecurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.5ScalarripCurCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.6ScalarripNewCfgFixedOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.7ScalarripNewCfgFixedAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.4.8ScalarripNewCfgFixedRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5NoderipRedistributeOspf
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.1ScalarripCurCfgOspfMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.2ScalarripNewCfgOspfMetricread-writecurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.5ScalarripCurCfgOspfOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.6ScalarripNewCfgOspfOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.7ScalarripNewCfgOspfAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.5.8ScalarripNewCfgOspfRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6NoderipRedistributeEospf
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.1ScalarripCurCfgEospfMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.2ScalarripNewCfgEospfMetricread-writecurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.5ScalarripCurCfgEospfOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.6ScalarripNewCfgEospfOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.7ScalarripNewCfgEospfAddOutRmapread-writecurrentThe route map to be add into out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.4.6.8ScalarripNewCfgEospfRemoveOutRmapread-writecurrentThe route map to be removed from out-rmap list. When read, 0 is returned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2Nodelayer3Stats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2NodearpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.1ScalararpStatEntriesread-onlycurrentThe current number of ARP entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.2ScalararpStatHighWaterread-onlycurrentThe highest number of ARP entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.2.3ScalararpStatMaxEntriesread-onlycurrentThe maximum number of ARP entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3NoderouteStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.1ScalarrouteStatEntriesread-onlycurrentThe current number of IP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.2ScalarrouteStatHighWaterread-onlycurrentThe highest number of IP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.3.3ScalarrouteStatMaxEntriesread-onlycurrentThe maximum number of IP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4NodevrrpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.1ScalarvrrpStatInAdversread-onlycurrentThe number of good VRRP advertisements which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.2ScalarvrrpStatOutAdversread-onlycurrentThe number of good VRRP advertisements which are transmitted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.3ScalarvrrpStatOutBadAdversread-onlycurrentThe number of bad VRRP advertisements which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.4ScalarvrrpStatBadVersionread-onlycurrentThe number of bad VRRP version adv which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.5ScalarvrrpStatBadAddressread-onlycurrentThe number of bad VRRP addres adv which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.6ScalarvrrpStatBadPasswordread-onlycurrentThe number of bad VRRP advertisements which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.7ScalarvrrpStatBadVridread-onlycurrentThe number of bad VRRP version ID adv which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.8ScalarvrrpStatBadDataread-onlycurrentThe number of bad VRRP advertisements which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.4.9ScalarvrrpStatBadIntervalread-onlycurrentThe number of bad VRRP iutervals which are received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5NodeospfStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1NodeospfGeneralStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1NodeospfCumRxTxStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.1ScalarospfCumRxPktsread-onlycurrentThe sum total of all OSPF packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.2ScalarospfCumTxPktsread-onlycurrentThe sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.3ScalarospfCumRxHelloread-onlycurrentThe sum total of all Hello packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.4ScalarospfCumTxHelloread-onlycurrentThe sum total of all Hello packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.5ScalarospfCumRxDatabaseread-onlycurrentThe sum total of all Database Description packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.6ScalarospfCumTxDatabaseread-onlycurrentThe sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.7ScalarospfCumRxlsReqsread-onlycurrentThe sum total of all Link State Request packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.8ScalarospfCumTxlsReqsread-onlycurrentThe sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.9ScalarospfCumRxlsAcksread-onlycurrentThe sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.10ScalarospfCumTxlsAcksread-onlycurrentThe sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.11ScalarospfCumRxlsUpdatesread-onlycurrentThe sum total of all Link State Update packets received on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.1.12ScalarospfCumTxlsUpdatesread-onlycurrentThe sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2NodeospfCumNbrChangeStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.1ScalarospfCumNbrhelloread-onlycurrentThe sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.2ScalarospfCumNbrStartread-onlycurrentThe sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval secon…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.3ScalarospfCumNbrAdjointOkread-onlycurrentThe sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and i…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.4ScalarospfCumNbrNegotiationDoneread-onlycurrentThe sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across al…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.5ScalarospfCumNbrExchangeDoneread-onlycurrentThe sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, acro…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.6ScalarospfCumNbrBadRequestsread-onlycurrentThe sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSP…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.7ScalarospfCumNbrBadSequenceread-onlycurrentThe sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.8ScalarospfCumNbrLoadingDoneread-onlycurrentThe sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.9ScalarospfCumNbrN1wayread-onlycurrentThe sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.10ScalarospfCumNbrRstAdread-onlycurrentThe sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.11ScalarospfCumNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.2.12ScalarospfCumNbrN2wayread-onlycurrentThe sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3NodeospfCumIntfChangeStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.1ScalarospfCumIntfHelloread-onlycurrentThe sum total number of Hello packets sent on all interfaces and areas
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.2ScalarospfCumIntfDownread-onlycurrentThe sum total number of interfaces down in all OSPF areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.3ScalarospfCumIntfLoopread-onlycurrentThe sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.4ScalarospfCumIntfUnloopread-onlycurrentThe sum total number of interfaces, connected to the attatched network in all OSPF areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.5ScalarospfCumIntfWaitTimerread-onlycurrentThe sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated R…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.6ScalarospfCumIntfBackupread-onlycurrentThe sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.3.7ScalarospfCumIntfNbrChangeread-onlycurrentThe sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4NodeospfTimersKickOffStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.1ScalarospfTmrsKckOffHelloread-onlycurrentThe sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.2ScalarospfTmrsKckOffRetransmitread-onlycurrentThe sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.3ScalarospfTmrsKckOffLsaLockread-onlycurrentThe sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.4ScalarospfTmrsKckOffLsaAckread-onlycurrentThe sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.5ScalarospfTmrsKckOffDbageread-onlycurrentThe total number of times the Dbage has been fired.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.6ScalarospfTmrsKckOffSummaryread-onlycurrentThe total number of times the Summary timer has been fired.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.1.4.7ScalarospfTmrsKckOffAseExportread-onlycurrentThe total number of times the ASE Export timer has been fired.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2NodeospfArea
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1TableospfAreaRxTxStatsnot-accessiblecurrentThe table of OSPF Area Rx/Tx Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1RowospfAreaRxTxStatsEntrynot-accessiblecurrentRx Tx packet Statistics about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.1ColumnospfAreaRxTxIndexread-onlycurrentThe index of the ospf Area for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.2ColumnospfAreaRxPktsread-onlycurrentThe total number of OSPF packets received in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.3ColumnospfAreaTxPktsread-onlycurrentThe total number of OSPF packets transmitted in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.4ColumnospfAreaRxHelloread-onlycurrentThe total number of Hello packets received in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.5ColumnospfAreaTxHelloread-onlycurrentThe total number of Hello packets transmitted in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.6ColumnospfAreaRxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.7ColumnospfAreaTxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.8ColumnospfAreaRxlsReqsread-onlycurrentThe total number of Link State Request packets received for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.9ColumnospfAreaTxlsReqsread-onlycurrentThe total number of Link State Request packets transmitted for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.10ColumnospfAreaRxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets received for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.11ColumnospfAreaTxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets transmitted for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.12ColumnospfAreaRxlsUpdatesread-onlycurrentThe total number of Link State Update packets received for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.13ColumnospfAreaTxlsUpdatesread-onlycurrentThe total number of Link State Update packets transmitted for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2TableospfAreaNbrChangeStatsnot-accessiblecurrentThe table of OSPF Area Neighbour Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1RowospfAreaNbrChangeStatsEntrynot-accessiblecurrentArea Neighbour Change Statistics about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.1ColumnospfAreaNbrIndexread-onlycurrentThe index of the ospf Area for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.2ColumnospfAreaNbrhelloread-onlycurrentThe total number of Hello packets received from neighbours in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.3ColumnospfAreaNbrStartread-onlycurrentThe total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.)…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.4ColumnospfAreaNbrAdjointOkread-onlycurrentThe total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.5ColumnospfAreaNbrNegotiationDoneread-onlycurrentThe total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.6ColumnospfAreaNbrExchangeDoneread-onlycurrentThe total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.7ColumnospfAreaNbrBadRequestsread-onlycurrentThe sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.8ColumnospfAreaNbrBadSequenceread-onlycurrentThe total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.9ColumnospfAreaNbrLoadingDoneread-onlycurrentThe total number of link state updates received for all out-of-date portions of the database in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.10ColumnospfAreaNbrN1wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.11ColumnospfAreaNbrRstAdread-onlycurrentThe total number of times the Neighbour adjacency has been reset across this OPSF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.12ColumnospfAreaNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.13ColumnospfAreaNbrN2wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3TableospfAreaChangeStatsnot-accessiblecurrentThe table of OSPF Area Change Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1RowospfAreaChangeStatsEntrynot-accessiblecurrentArea Change Statistics about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.1ColumnospfAreaIntfIndexread-onlycurrentThe index of the OSPF Area for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.2ColumnospfAreaIntfHelloread-onlycurrentThe total number of Hello packets sent on this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.3ColumnospfAreaIntfDownread-onlycurrentThe total number of interfaces down in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.4ColumnospfAreaIntfLoopread-onlycurrentThe total number of interfaces no longer connected to the attatched network in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.5ColumnospfAreaIntfUnloopread-onlycurrentThe total number of interfaces connected to the attatched network in this OSPF area..
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.6ColumnospfAreaIntfWaitTimerread-onlycurrentThe total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Route…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.7ColumnospfAreaIntfBackupread-onlycurrentThe total number of Backup Designated Routers on the attatched network for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.8ColumnospfAreaIntfNbrChangeread-onlycurrentThe total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4TableospfAreaErrorStatsnot-accessiblecurrentThe table of OSPF Area Error Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1RowospfAreaErrorStatsEntrynot-accessiblecurrentError Statistics for an OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.1ColumnospfAreaErrIndexread-onlycurrentThe index of the OSPF Area for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.2ColumnospfAreaErrAuthFailureread-onlycurrentThe total number of packets received with a wrong password in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.3ColumnospfAreaErrNetmaskMismatchread-onlycurrentThe total number of packets received with a wrong netmask in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.4ColumnospfAreaErrHelloMismatchread-onlycurrentThe total number of packets received with a different hello interval in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.5ColumnospfAreaErrDeadMismatchread-onlycurrentThe total number of packets received with a different dead interval in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.6ColumnospfAreaErrOptionsMismatchread-onlycurrentThe total number of packets received with a different options in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.7ColumnospfAreaErrUnknownNbrread-onlycurrentThe total number of packets received from an unknown neighbor in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.8ColumnospfAreaErrAreaMismatchread-onlycurrentThe total number of packets received with a wrong area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3NodeospfInterface
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1TableospfIntfRxTxStatsnot-accessiblecurrentThe table of OSPF Interface Rx/Tx packet Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1RowospfIntfRxTxStatsEntrynot-accessiblecurrentOSPF interface Rx/Tx packet statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.1ColumnospfIntfRxTxIndexread-onlycurrentThe OSPF interface for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.2ColumnospfIntfRxPktsread-onlycurrentThe total number of OSPF packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.3ColumnospfIntfTxPktsread-onlycurrentThe total number of OSPF packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.4ColumnospfIntfRxHelloread-onlycurrentThe total number of Hello packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.5ColumnospfIntfTxHelloread-onlycurrentThe total number of Hello packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.6ColumnospfIntfRxDatabaseread-onlycurrentThe total number of Database Description packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.7ColumnospfIntfTxDatabaseread-onlycurrentThe total number of Database Description packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.8ColumnospfIntfRxlsReqsread-onlycurrentThe total number of Link State Request packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.9ColumnospfIntfTxlsReqsread-onlycurrentThe total number of Link State Request packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.10ColumnospfIntfRxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.11ColumnospfIntfTxlsAcksread-onlycurrentThe total number of Link State Acknowledgement packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.12ColumnospfIntfRxlsUpdatesread-onlycurrentThe total number of Link State Update packets received for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.13ColumnospfIntfTxlsUpdatesread-onlycurrentThe total number of Link State Update packets transmitted for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2TableospfIntfNbrChangeStatsnot-accessiblecurrentThe table of OSPF Interface Neighbour change Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1RowospfIntfNbrChangeStatsEntrynot-accessiblecurrentOSPF interface Neighbour Change statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.1ColumnospfIntfNbrIndexread-onlycurrentThe index of the OSPF Interface for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.2ColumnospfIntfNbrhelloread-onlycurrentThe total number of Hello packets received from neighbours in this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.3ColumnospfIntfNbrStartread-onlycurrentThe total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.)…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.4ColumnospfIntfNbrAdjointOkread-onlycurrentThe total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.5ColumnospfIntfNbrNegotiationDoneread-onlycurrentThe total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.6ColumnospfIntfNbrExchangeDoneread-onlycurrentThe total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.7ColumnospfIntfNbrBadRequestsread-onlycurrentThe total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.8ColumnospfIntfNbrBadSequenceread-onlycurrentThe total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.9ColumnospfIntfNbrLoadingDoneread-onlycurrentThe total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.10ColumnospfIntfNbrN1wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.11ColumnospfIntfNbrRstAdread-onlycurrentThe sum total number of times the Neighbour adjacency has been reset on this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.12ColumnospfIntfNbrDownread-onlycurrentThe total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.13ColumnospfIntfNbrN2wayread-onlycurrentThe total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3TableospfIntfChangeStatsnot-accessiblecurrentThe table of OSPF Interface change Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1RowospfIntfChangeStatsEntrynot-accessiblecurrentOSPF interface Change statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.1ColumnospfIntfIndexread-onlycurrentThe index of the OSPF Interface for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.2ColumnospfIntfHelloread-onlycurrentThe total number of Hello packets sent by this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.3ColumnospfIntfDownread-onlycurrentThe total number of times the interface was down.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.4ColumnospfIntfLoopread-onlycurrentThe total number of times the interface was no longer connected to the attatched network.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.5ColumnospfIntfUnloopread-onlycurrentThe total number of times the interface, connected back to the attatched network.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.6ColumnospfIntfWaitTimerread-onlycurrentThe total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Route…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.7ColumnospfIntfBackupread-onlycurrentThe total number of Backup Designated Routers on the attatched network for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.8ColumnospfIntfNbrChangeread-onlycurrentThe total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4TableospfIntfErrorStatsnot-accessiblecurrentThe table of OSPF Interface Error Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1RowospfIntfErrorStatsEntrynot-accessiblecurrentError Statistics for an OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.1ColumnospfIntfErrIndexread-onlycurrentThe index of the OSPF Intf for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.2ColumnospfIntfErrAuthFailureread-onlycurrentThe total number of packets received with a wrong password in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.3ColumnospfIntfErrNetmaskMismatchread-onlycurrentThe total number of packets received with a wrong netmask in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.4ColumnospfIntfErrHelloMismatchread-onlycurrentThe total number of packets received with a different hello interval in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.5ColumnospfIntfErrDeadMismatchread-onlycurrentThe total number of packets received with a different dead interval in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.6ColumnospfIntfErrOptionsMismatchread-onlycurrentThe total number of packets received with a different options in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.7ColumnospfIntfErrUnknownNbrread-onlycurrentThe total number of packets received from an unknown neighbor in this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.8ColumnospfIntfErrAreaMismatchread-onlycurrentThe total number of packets received with a wrong area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6NodeclearStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.1ScalaripClearStatsread-writecurrentSetting this to clear(1) results in clearing the IP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.2ScalarvrrpClearStatsread-writecurrentSetting this to clear(2) results in clearing the VRRP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.4ScalarripClearStatsread-writecurrentSetting this to clear(1) results in clearing the RIP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.5ScalarospfClearStatsread-writecurrentSetting this to clear(1) results in clearing the OSPF statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.6ScalartcpClearStatsread-writecurrentSetting this to clear(1) results in clearing the TCP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.7ScalarudpClearStatsread-writecurrentSetting this to clear(1) results in clearing the UDP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.8ScalardnsClearStatsread-writecurrentSetting this to clear(1) results in clearing the DNS statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.9ScalararpClearStatsread-writecurrentSetting this to clear(1) results in clearing the ARP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.10ScalaricmpClearStatsread-writecurrentSetting this to clear(1) results in clearing the ICMP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.6.11ScalarrouteClearStatsread-writecurrentSetting this to clear(1) results in clearing the Route statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7NodeigmpStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1TableigmpSnoopStatsnot-accessiblecurrentThe table of OSPF Interface Error Statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1RowigmpSnoopStatsEntrynot-accessiblecurrentStatistics for IGMP Snooping.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.1ColumnigmpSnoopVlanIndexread-onlycurrentThe index of the VLAN for which these statistics apply.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.2ColumnrxIgmpValidPktsread-onlycurrentThe total number of valid IGMP packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.3ColumnrxIgmpInvalidPktsread-onlycurrentThe total number of invalid IGMP packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.4ColumnrxIgmpGenQueriesread-onlycurrentThe total number of IGMP General Query packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.5ColumnrxIgmpGrpSpecificQueriesread-onlycurrentThe total number of IGMP Group Specific Query packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.6ColumnrxIgmpLeavesread-onlycurrentThe total number of IGMP Leave packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.7ColumnrxIgmpReportsread-onlycurrentThe total number of IGMP Report packets received on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.8ColumntxIgmpGrpSpecificQueriesread-onlycurrentThe total number of IGMP Group Specific Query packets transmitted on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.9ColumntxIgmpReportsread-onlycurrentThe total number of IGMP Report packets transmitted on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.10ColumntxIgmpLeavesread-onlycurrentThe total number of IGMP Leave packets transmitted on this VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.11ColumnigmpClearVlanStatsread-writecurrentSetting this to clear(1) results in clearing the statistics for this snooping VLAN.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.2ScalarigmpClearAllStatsread-writecurrentSetting this to clear(1) results in clearing the IGMP statistics.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8NodeipStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.1ScalaripStatsInReceivesread-onlycurrentip InReceive
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.2ScalaripStatsInHdrErrorsread-onlycurrentip InHdrError
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.3ScalaripStatsInAddrErrorsread-onlycurrentip InAddrErrors
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.4ScalaripStatsInUnknownProtosread-onlycurrentip InUnknownProtos
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.5ScalaripStatsInDiscardsread-onlycurrentip InDiscards
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.6ScalaripStatsInDeliversread-onlycurrentip InDelivers
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.7ScalaripStatsOutRequestsread-onlycurrentip OutRequests
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.8ScalaripStatsOutDiscardsread-onlycurrentip OutDiscards
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.8.9ScalaripStatsDefaultTTLread-onlycurrentip DefaultTTL
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13Noderip2Stats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.1ScalarripStatInPacketsread-onlycurrentThe total number of RIP packets recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.2ScalarripStatOutPacketsread-onlycurrentThe total number of RIP packets transmitted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.3ScalarripStatInRequestPktsread-onlycurrentThe total number of RIP requests recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.4ScalarripStatInResponsePktsread-onlycurrentThe total number of RIP response recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.5ScalarripStatOutRequestPktsread-onlycurrentThe total number of RIP requests transmitted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.6ScalarripStatOutResponsePktsread-onlycurrentThe total number of RIP responses transmitted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.7ScalarripStatRouteTimeoutread-onlycurrentThe total number of RIP route timeouts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.8ScalarripStatInBadSizePktsread-onlycurrentThe total number of bad size RIP packets recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.9ScalarripStatInBadVersionread-onlycurrentThe total number of RIP bad versions recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.10ScalarripStatInBadZerosread-onlycurrentThe total number of RIP bad zeros recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.11ScalarripStatInBadSourcePortread-onlycurrentThe total number of RIP bad source port recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.12ScalarripStatInBadSourceIPread-onlycurrentThe total number of RIP bad source IP recieved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.13.13ScalarripStatInSelfRcvPktsread-onlycurrentThe total number of RIP packets from self received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14NodednsStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.1ScalardnsStatInGoodDnsRequestsread-onlycurrentThe total number of good DNS request packets received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.2ScalardnsStatOutDnsRequestsread-onlycurrentThe total number of DNS request packets
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.14.3ScalardnsStatInBadDnsRequestsread-onlycurrentThe total number of bad DNS request packets received
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15Nodegeal3Stats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.1ScalarmaxL3TableSizeread-onlycurrentMax L3 table size
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.2ScalarnoL3EntriesUsedread-onlycurrentNumber of L3 entries used
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.3ScalarmaxLpmTableSizeread-onlycurrentMax LPM table size
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.4ScalarnoLpmEntriesUsedread-onlycurrentNumber of LPM entries used
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.5ScalarmaxBlockInLpmTableread-onlycurrentMax number of blocks in LPM table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.15.6ScalarnoBlocksUsedInLpmTableread-onlycurrentNumber of blocks used in LPM table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3Nodelayer3Info
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1NodeipRoutingInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1TableipRouteInfoTablenot-accessiblecurrentThe table of run-time IP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1RowipRouteInfoEntrynot-accessiblecurrentA row in the run-time IP route table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.1ColumnipRouteInfoIndxread-onlycurrentThe index of this route table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.2ColumnipRouteInfoDestIpread-onlycurrentThe destination IP address of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.3ColumnipRouteInfoMaskread-onlycurrentThe destination IP mask of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.4ColumnipRouteInfoGatewayread-onlycurrentThe next-hop router address for this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.5ColumnipRouteInfoTagread-onlycurrentThe tag-type for this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.6ColumnipRouteInfoTyperead-onlycurrentThe type of the route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.7ColumnipRouteInfoInterfaceread-onlycurrentThe interface number for which the destination address is applicable.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.8ColumnipRouteInfoMetricread-onlycurrentThe metric of this route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.2ScalarrouteTableClearread-writecurrentSetting this value to clear(2) clears the route table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2NodearpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1TablearpInfoTablenot-accessiblecurrentThe table of ARP entries.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1RowarpInfoEntrynot-accessiblecurrentA row in the ARP table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.1ColumnarpInfoDestIpread-onlycurrentThe destination IP address of the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.2ColumnarpInfoMacAddrread-onlycurrentThe MAC address for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.3ColumnarpInfoVLANread-onlycurrentThe VLAN identifier for the ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.4ColumnarpInfoSrcPortread-onlycurrentThe port number on which this entry's equivalence is effective.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.6ColumnarpInfoFlagread-onlycurrentThe flag associated with this ARP entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.2ScalararpCacheClearread-writecurrentSetting this value to clear(2) clears the ARP cache.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3NodevrrpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1TablevrrpInfoVirtRtrTablenot-accessiblecurrentThe table of VRRP virtual router run-time information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1RowvrrpInfoVirtRtrTableEntrynot-accessiblecurrentThe run-time information about a VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.1ColumnvrrpInfoVirtRtrIndexread-onlycurrentThe VRRP virtual router index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.2ColumnvrrpInfoVirtRtrConfigread-onlycurrentThe status of the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.3ColumnvrrpInfoVirtRtrIDread-onlycurrentThe VRRP virtual router identifier.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.4ColumnvrrpInfoVirtRtrAddrread-onlycurrentThe VRRP virtual router IP address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.5ColumnvrrpInfoVirtRtrIfIndexread-onlycurrentThe IfIndex that the VRRP virtual router is representing.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.6ColumnvrrpInfoVirtRtrPriorityread-onlycurrentThe priority value to be used by the specified VRRP virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.7ColumnvrrpInfoVirtRtrStateread-onlycurrentThe VRRP virtual router state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.8ColumnvrrpInfoVirtRtrOwnershipread-onlycurrentThe VRRP virtual router ownership status.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4NodeospfInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1NodeospfGeneralInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.1ScalarospfVersionread-onlycurrentOSPF version.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.2ScalarospfRouterIDread-onlycurrentThe router ID of the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.3ScalarospfStartTimeread-onlycurrentThe time when ospf has been started.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.4ScalarospfProcessUptimeread-onlycurrentThe time since ospf has been started.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.5ScalarospfLsTypesSupportedread-onlycurrentThe Link State Types that are supported.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.6ScalarospfAreaBorderRouterread-onlycurrentArea Border Router Role.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.7ScalarospfAreaBoundaryRouterread-onlycurrentArea Boundary Router Role.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.8ScalarospfExternalLsaread-onlycurrentThe number of external LSAs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.9ScalarospfIntfCountForRouterread-onlycurrentThe number of interfaces for this router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.10ScalarospfVlinkCountForRouterread-onlycurrentThe number of virtual links for this router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.11ScalarospfNewLsaReceivedread-onlycurrentThe number of new LSAs reveived.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.12ScalarospfTotalLsaOriginatedread-onlycurrentThe number of LSAs originated.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.13ScalarospfTotalNumberOfLsdbEntriesread-onlycurrentTotal number of entries in the Link State Database.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.14ScalarospfTotalNeighboursread-onlycurrentThe total number of OSPF neighbours.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.15ScalarospfNbrInInitStateread-onlycurrentThe number of neighbours in the initial state of exchange.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.16ScalarospfNbrInExchStateread-onlycurrentThe number of neighbours in the exchange state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.17ScalarospfNbrInFullStateread-onlycurrentThe number of neighbours in the Full state of exchange.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.18ScalarospfTotalAreasread-onlycurrentThe Total number of areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.19ScalarospfTotalTransitAreasread-onlycurrentThe Total number of Transit areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.20ScalarospfTotalNssaAreasread-onlycurrentThe Total number of NSSA areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.1.21ScalarospfTotalStubAreasread-onlycurrentThe Total number of STUB areas.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2TableospfAreaInfoTablenot-accessiblecurrentThe table of OSPF Area information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1RowospfAreaInfoEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.1ColumnospfAreaInfoIndexread-onlycurrentThe OSPF area number for which the OSPF info table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.2ColumnospfAreaInfoIdread-onlycurrentThe IP address of the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.3ColumnospfAreaInfoStatusread-onlycurrentArea Status: disabled(0), enabled(1).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.4ColumnospfTotalNumberOfInterfacesread-onlycurrentThe total number of interfaces for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.5ColumnospfNumberOfInterfacesUpread-onlycurrentThe number of interfaces UP in area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.6ColumnospfAreaInfoAuthTyperead-onlycurrentType of authentication being used: none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.7ColumnospfAreaInfoSPFread-onlycurrentThe number of times SPF ran.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.8ColumnospfNumberOfLsdbEntriesread-onlycurrentThe number of Link State Database entries for this OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.9ColumnospfAreaInfoAreaBorderRouterread-onlycurrentThe Area Border Router count.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.10ColumnospfAreaInfoASBoundaryRouterread-onlycurrentThe AS Boundary Router count.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.11ColumnospfAreaInfoTotalNeighboursread-onlycurrentThe total number of OSPF neighbors.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.12ColumnospfAreaInfoNeighborsINITstateread-onlycurrentTotal neighbors in INIT state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.13ColumnospfAreaInfoNeighborsEXCHstateread-onlycurrentTotal neighbors in EXCH state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.14ColumnospfAreaInfoNeighborsFULLstateread-onlycurrentTotal neighbors in FULL state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.15ColumnospfAreaInfoLsTypesAcceptedread-onlycurrentLS types accepted by this area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3TableospfIntfInfoTablenot-accessiblecurrentThe table of OSPF Interface information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1RowospfIntfInfoEntrynot-accessiblecurrentInformation about a OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.1ColumnospfIfInfoIndexread-onlycurrentThe OSPF interface number for which the OSPF info table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.2ColumnospfIfInfoIpAddressread-onlycurrentThe IP address of the OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.3ColumnospfIfInfoArearead-onlycurrentThe index of the area that the interface belongs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.4ColumnospfIfInfoAdminStatusread-onlycurrentAdmin Status of the interface: down(0), up(1).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.5ColumnospfIfInfoRouterIDread-onlycurrentThe router ID of the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.6ColumnospfIfInfoStateread-onlycurrentThe state of the interface: Down(0), Loopback(1), Waiting(2), P to P(3), DR(4), BackuDR(5), DR Other(6).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.7ColumnospfIfInfoPriorityread-onlycurrentInterface router priority
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.8ColumnospfIfInfoDesignatedRouterIDread-onlycurrentThe OSPF Designated Router ID for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.9ColumnospfIfInfoDesignatedRouterIpAddressread-onlycurrentThe OSPF Designated Router IP Address for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.10ColumnospfIfInfoBackupDesignatedRouterIDread-onlycurrentThe OSPF Backup Designated Router ID for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.11ColumnospfIfInfoBackupDesignatedRouterIpAddressread-onlycurrentThe OSPF Backup Designated Router Ip Address for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.12ColumnospfIfInfoHelloread-onlycurrentThe hello timer for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.13ColumnospfIfInfoDeadread-onlycurrentThe dead timer for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.14ColumnospfIfInfoWaitread-onlycurrentThe OSPF Wait interval for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.15ColumnospfIfInfoRetransmitread-onlycurrentThe retransmit interval for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.16ColumnospfIfInfoTransitDelayread-onlycurrentThe transit delay for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.17ColumnospfIfInfoTotalNeighboursread-onlycurrentThe total number of neighbours for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.18ColumnospfIfInfoEventsread-onlycurrentThe total number of events for this OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.19ColumnospfIfInfoAuthTyperead-onlycurrentType of authentication being used: none(1) - no authentication, password(2) - use password, md5(3) - use MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4TableospfVirtIntfInfoTablenot-accessiblecurrentThe table of OSPF virtual interfaces information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1RowospfVirtIntfInfoEntrynot-accessiblecurrentInformation about an OSPF virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.1ColumnospfVirtIntfInfoIndexread-onlycurrentThe OSPF Virtual Interface number for which this table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.2ColumnospfVirtIntfInfoIpAddrread-onlycurrentThe IP Address of this virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.3ColumnospfVirtIntfInfoArearead-onlycurrentThe index of the OSPF area to which this virtual interface belongs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.4ColumnospfVirtIntfInfoRouterIdread-onlycurrentThe Router ID.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.5ColumnospfVirtIntfInfoStateread-onlycurrentState disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.6ColumnospfVirtIntfInfoCostread-onlycurrentThe cost of the virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.7ColumnospfVirtIntfInfoTransread-onlycurrentThe transit delay for the virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.8ColumnospfVirtIntfInfoHelloread-onlycurrentHello interval.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.9ColumnospfVirtIntfInfoDeadread-onlycurrentDead interval.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.10ColumnospfVirtIntfInfoWaitread-onlycurrentWait interval.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.11ColumnospfVirtIntfInfoRetraread-onlycurrentRetransmit interval.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.12ColumnospfVirtIntfInfoAuthread-onlycurrentAuthentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.13ColumnospfVirtIntfInfoEventsread-onlycurrentEvents.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.14ColumnospfVirtIntfInfoNbrread-onlycurrentThe IP Address of the OSPF neighbor for this virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.15ColumnospfVirtIntfInfoNbrStateread-onlycurrentState down(0),attempt(1),init(2),2 way(3), exstart(4),exchange(5),loading(6),full(7)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.16ColumnospfVirtIntfInfoAreaIdread-onlycurrentThea AreaId of the virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5TableospfIfNbrTablenot-accessiblecurrentThe table of OSPF Interface Neighbor information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1RowospfIfNbrEntrynot-accessiblecurrentInformation about a OSPF interface, neighbor pair.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.1ColumnospfIfNbrIntfIndexread-onlycurrentThe OSPF Interface number for which this Interface/Nbr table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.2ColumnospfIfNbrIpAddrread-onlycurrentThe OSPF Neighbor ID .
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.3ColumnospfIfNbrPriorityread-onlycurrentThe priority of the OSPF neighbor.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.4ColumnospfIfNbrStateread-onlycurrentThe state of the OSPF neighbor.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.5ColumnospfIfNbrDesignatedRtrread-onlycurrentThe IP Address of the Designated Router for this OSPF Neighbor.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.6ColumnospfIfNbrBackupDesignatedRtrread-onlycurrentThe IP Address of the backup designated Router for this OSPF Neighbor.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.7ColumnospfIfNbrIpAddressread-onlycurrentThe IP Address of the OSPF Neighbor.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6TableospfSumRangesInfoTablenot-accessiblecurrentThe table of OSPF summary ranges information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1RowospfSumRangesInfoEntrynot-accessiblecurrentSummary ranges information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.1ColumnospfSumRangesInfoIndexread-onlycurrentThe OSPF range index for which this table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.2ColumnospfSumRangesInfoArearead-onlycurrentArea.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.3ColumnospfSumRangesInfoNetworkread-onlycurrentNetwork.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.4ColumnospfSumRangesInfoMaskread-onlycurrentMask.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.5ColumnospfSumRangesInfoActionread-onlycurrentAction propagate(0), hide(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.6ColumnospfSumRangesInfoListTyperead-onlycurrentSummary address list Non-NSSA(0), NSSA(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7TableospfRoutesInfoTablenot-accessiblecurrentThe table of OSPF routes information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1RowospfRoutesInfoEntrynot-accessiblecurrentOSPF routes information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.1ColumnospfRoutesInfoIndexread-onlycurrentThe OSPF route table entry index for which this table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.2ColumnospfRoutesInfoDestinationread-onlycurrentDestination.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.3ColumnospfRoutesInfoMaskread-onlycurrentMask.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.4ColumnospfRoutesInfoViaread-onlycurrentNext hop.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.5ColumnospfRoutesInfoTyperead-onlycurrentRoute type. Codes: IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 * …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8TableospfLsdbInfoTablenot-accessiblecurrentThe OSPF Process's Link State Database.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1RowospfLsdbInfoEntrynot-accessiblecurrentA single Link State Advertisement.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.1ColumnospfLsdbInfoIndexread-onlycurrentThe 32 bit index in the table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.2ColumnospfLsdbInfoAreaIdread-onlycurrentThe 32 bit identifier of the Area from which the LSA was received.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.3ColumnospfLsdbInfoTyperead-onlycurrentThe type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.4ColumnospfLsdbInfoLsidread-onlycurrentThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.5ColumnospfLsdbInfoRouterIdread-onlycurrentThe 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.6ColumnospfLsdbInfoSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.7ColumnospfLsdbInfoAgeread-onlycurrentThis field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.8ColumnospfLsdbInfoChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.9ColumnospfLsdbInfoAdvertisementread-onlycurrentThe entire Link State Advertisement, including its header.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9TableospfExtLsdbInfoTablenot-accessiblecurrentThe OSPF Process's Links State Database.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1RowospfExtLsdbInfoEntrynot-accessiblecurrentA single Link State Advertisement.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.1ColumnospfExtLsdbInfoIndexread-onlycurrentThe 32 bit index in the table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.2ColumnospfExtLsdbInfoTyperead-onlycurrentThe type of the link state advertisement. Each link state type has a separate advertise- ment format.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.3ColumnospfExtLsdbInfoLsidread-onlycurrentThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.4ColumnospfExtLsdbInfoRouterIdread-onlycurrentThe 32 bit number that uniquely identifies the originating router in the Autonomous System.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.5ColumnospfExtLsdbInfoSequenceread-onlycurrentThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.6ColumnospfExtLsdbInfoAgeread-onlycurrentThis field is the age of the link state adver- tisement in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.7ColumnospfExtLsdbInfoChecksumread-onlycurrentThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.8ColumnospfExtLsdbInfoAdvertisementread-onlycurrentThe entire Link State Advertisement, including its header.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5NodeigmpInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1TableigmpInfoTablenot-accessiblecurrentThe table of IGMP group membership information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1RowigmpInfoEntrynot-accessiblecurrentInformation about an IGMP group member .
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.1ColumnigmpInfoIndexread-onlycurrentThe igmp group number for which the IGMP info table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.2ColumnigmpInfoGroupIdread-onlycurrentThe IP address of the IGMP group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.3ColumnigmpInfoVlanIdread-onlycurrentThe VLAN ID for this IGMP group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.5ColumnigmpInfoVersionread-onlycurrentThe Version of IGMP host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.6ColumnigmpInfoPortNumread-onlycurrentThe Version of IGMP host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.7ColumnigmpInfoExpiresread-onlycurrentThe expiration time for this host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2TableigmpMrtrInfoTablenot-accessiblecurrentThe table of IGMP mrouters.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1RowigmpMrtrInfoEntrynot-accessiblecurrentInformation about an IGMP mrouter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.1ColumnigmpMrtrInfoIndexread-onlycurrentThe mrouter number for which the IGMP mrouter info table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.2ColumnigmpMrtrInfoVlanIdread-onlycurrentThe VLAN ID on which this IGMP mrouter is attached.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.3ColumnigmpMrtrInfoPortIdread-onlycurrentThe port on which this IGMP mrouter is attached.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.4ColumnigmpMrtrInfoVersionread-onlycurrentThe version of this IGMP mrouter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.5ColumnigmpMrtrInfoExpiresread-onlycurrentThe expiration time for this mrouter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.6ColumnigmpMrtrInfoMrtread-onlycurrentThe Maximum Query Response time of this IGMP mrouter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7Noderip2Info
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1Noderip2GeneralInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.1ScalarripInfoStateread-onlycurrentRIP global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.1.2ScalarripInfoUpdatePeriodread-onlycurrentUpdate Period in seconds.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2Tablerip2InfoIntfTablenot-accessiblecurrentThe information table of RIP.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1RowripInfoIntfEntrynot-accessiblecurrentInformation about RIP on IP interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.1ColumnripInfoIntfIndexread-onlycurrentThe interface number for which the RIP information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.2ColumnripInfoIntfVersionread-onlycurrentRIP version.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.3ColumnripInfoIntfAddressread-onlycurrentThe interface address.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.4ColumnripInfoIntfStateread-onlycurrentThe status of RIP protocol.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.5ColumnripInfoIntfListenread-onlycurrentThe status of listening to route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.6ColumnripInfoIntfTrigUpdateread-onlycurrentThe status of triggered updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.7ColumnripInfoIntfMcastUpdateread-onlycurrentThe status of multicast updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.8ColumnripInfoIntfPoisonReverseread-onlycurrentThe status of RIP poison reverse.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.9ColumnripInfoIntfSupplyread-onlycurrentThe status of supplying route updates.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.10ColumnripInfoIntfMetricread-onlycurrentRIP route metric for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.11ColumnripInfoIntfAuthread-onlycurrentThe type of Authentication used on this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.12ColumnripInfoIntfKeyread-onlycurrentRIP update authentication password.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.13ColumnripInfoIntfDefaultread-onlycurrentSpecifies what RIP does with default routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8NodeipInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.1ScalaripInfoRouterIDread-onlycurrentRouter ID information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2TableipIntfInfoTablenot-accessiblecurrentThe table of IP interface information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1RowintfInfoEntrynot-accessiblecurrentA row in IP interface information table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.1ColumnintfInfoIndexread-onlycurrentThe interface number for which the information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.2ColumnintfInfoAddrread-onlycurrentThe IP address of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.3ColumnintfInfoNetMaskread-onlycurrentThe subnet mask of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.4ColumnintfInfoBcastAddrread-onlycurrentThe broadcast address of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.5ColumnintfInfoVlanread-onlycurrentThe VLAN number for this interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.6ColumnintfInfoStatusread-onlycurrentThe status of the interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3TablegatewayInfoTablenot-accessiblecurrentThe table containing information for the default gateways.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1RowgatewayInfoEntrynot-accessiblecurrentA row in the gateway information table
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.1ColumngatewayInfoIndexread-onlycurrentThe gateway number for which the information is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.2ColumngatewayInfoAddrread-onlycurrentThe IP address of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.3ColumngatewayInfoVlanread-onlycurrentThe VLAN number for this gateway (0 for any).
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.4ColumngatewayInfoStatusread-onlycurrentThe status of the default gateway.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.4ScalaripInfoBootpRelayStateread-onlycurrentThe state of BOOTP relay.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.5ScalaripInfoBootpRelayAddrread-onlycurrentThe IP address of BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.6ScalaripInfoBootpRelayAddr2read-onlycurrentThe IP address of second BOOTP server.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.7ScalaripInfoFwdStateread-onlycurrentIP forwarding global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.8ScalaripInfoFwdDirectedBcastread-onlycurrentThe state of forwarding directed broadcasts.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9TableipInfoNwfTablenot-accessiblecurrentThe table of IP network filter information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1RowipInfoNwfEntrynot-accessiblecurrentA row in the IP network filter information table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.1ColumnipInfoNwfIndexread-onlycurrentThe netowrk filter number for which the NWF is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.2ColumnipInfoNwfAddrread-onlycurrentThe IP address of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.3ColumnipInfoNwfMaskread-onlycurrentThe subnet mask of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.4ColumnipInfoNwfStateread-onlycurrentThe state of the network filter.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10TableipInfoRmapTablenot-accessiblecurrentThe table of IP route map information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1RowipInfoRmapEntrynot-accessiblecurrentInformation about an IP route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.1ColumnipInfoRmapIndexread-onlycurrentThe route map number for which the RMAP is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.2ColumnipInfoRmapLpread-onlycurrentThe local-preference of the route map. 4294967295 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.3ColumnipInfoRmapMetricread-onlycurrentThe metric of the route map. 4294967295 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.4ColumnipInfoRmapPrecread-onlycurrentThe precedence of the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.5ColumnipInfoRmapWeightread-onlycurrentThe weight of the route map. 65535 means none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.6ColumnipInfoRmapStateread-onlycurrentEnable or disable the route map.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.7ColumnipInfoRmapApread-onlycurrentThe as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is:<AS number> [<AS number>][ <AS number>]
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.8ColumnipInfoRmapMetricTyperead-onlycurrentThe OSPF metric-type of the matched route.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11NodeipOspfInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.1ScalaripOspfInfoStateread-onlycurrentOSPF global state.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.2ScalaripOspfInfoDefaultRouteMetricread-onlycurrentThe metric to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.3ScalaripOspfInfoDefaultRouteMetricTyperead-onlycurrentThe AS External metric type to be assigned.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.4ScalaripOspfInfoRouterIDread-onlycurrentThe router ID of the switch.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.5ScalaripOspfInfoLsdbLimitread-onlycurrentThe LSDB limit for external LSA.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6TableipOspfAreaInfoTablenot-accessiblecurrentThe table of OSPF Area Information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1RowipOspfAreaInfoEntrynot-accessiblecurrentInformation about a OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.1ColumnipOspfAreaInfoIndexread-onlycurrentThe OSPF area number for which the OSPF area table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.2ColumnipOspfAreaInfoIdread-onlycurrentThe IP Address of the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.3ColumnipOspfAreaInfoSpfIntervalread-onlycurrentThe SPF interval for the OSPF area.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.4ColumnipOspfAreaInfoAuthTyperead-onlycurrentType of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.5ColumnipOspfAreaInfoTyperead-onlycurrentType of Area. transit(0) stub(1) nssa(2)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.6ColumnipOspfAreaInfoMetricread-onlycurrentMetric (1-65535)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.7ColumnipOspfAreaInfoStatusread-onlycurrentStatus disabled(0) enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7TableipOspfRangeInfoTablenot-accessiblecurrentThe table of OSPF summary range information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1RowipOspfRangeInfoEntrynot-accessiblecurrentInformation about an OSPF summary range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.1ColumnipOspfRangeInfoIndexread-onlycurrentThe range number for which the OSPF summary range table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.2ColumnipOspfRangeInfoAddrread-onlycurrentThe IP Address of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.3ColumnipOspfRangeInfoMaskread-onlycurrentThe mask of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.4ColumnipOspfRangeInfoAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.5ColumnipOspfRangeInfoHideStateread-onlycurrentThe state of the hide range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.6ColumnipOspfRangeInfoStateread-onlycurrentThe state of the range.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8TableipOspfIntfInfoTablenot-accessiblecurrentThe table of OSPF Interface Information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1RowipOspfIntfInfoEntrynot-accessiblecurrentInformation about an OSPF Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.1ColumnipOspfIntfInfoIndexread-onlycurrentThe OSPF Interface number for which the OSPF Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.2ColumnipOspfIntfInfoIdread-onlycurrentThe IP Address of the OSPF interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.3ColumnipOspfIntfInfoArearead-onlycurrentThe index of the area that the interface belongs
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.4ColumnipOspfIntfInfoMdkeyread-onlycurrentThe MD5 key for the OSPF interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.5ColumnipOspfIntfInfoCostread-onlycurrentInterface cost
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.6ColumnipOspfIntfInfoPrioread-onlycurrentInterface router priority
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.7ColumnipOspfIntfInfoHelloread-onlycurrentHello interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.8ColumnipOspfIntfInfoDeadread-onlycurrentDead interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.9ColumnipOspfIntfInfoTransread-onlycurrentTransit delay
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.10ColumnipOspfIntfInfoRetraread-onlycurrentRetransmit interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.11ColumnipOspfIntfInfoAuthKeyread-onlycurrentAuthentication Key
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.12ColumnipOspfIntfInfoStatusread-onlycurrentStatus of the interface disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9TableipOspfVirtIntfInfoTablenot-accessiblecurrentThe table of OSPF Virtual Interface Information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1RowipOspfVirtIntfInfoEntrynot-accessiblecurrentInformation about an OSPF virtual Interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.1ColumnipOspfVirtIntfInfoIndexread-onlycurrentThe OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.2ColumnipOspfVirtIntfInfoAreaIdread-onlycurrentThe index of the OSPF area to which this virtual interface belongs.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.3ColumnipOspfVirtIntfInfoNbrread-onlycurrentThe IP Address of the OSPF neighbor for this virtual interface.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.4ColumnipOspfVirtIntfInfoMdkeyread-onlycurrentThe MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.5ColumnipOspfVirtIntfInfoHelloread-onlycurrentHello interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.6ColumnipOspfVirtIntfInfoDeadread-onlycurrentDead interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.7ColumnipOspfVirtIntfInfoTransread-onlycurrentTransit delay
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.8ColumnipOspfVirtIntfInfoRetraread-onlycurrentRetransmit interval
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.9ColumnipOspfVirtIntfInfoAuthKeyread-onlycurrentAuthentication Key
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.10ColumnipOspfVirtIntfInfoStatusread-onlycurrentStatus disabled(0), enabled(1)
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10TableipOspfHostInfoTablenot-accessiblecurrentThe table of OSPF Host Information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1RowipOspfHostInfoEntrynot-accessiblecurrentInformation about a OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.1ColumnipOspfHostInfoIndexread-onlycurrentThe OSPF host number for which the OSPF host table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.2ColumnipOspfHostInfoIpAddrread-onlycurrentThe IP Address of the OSPF host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.3ColumnipOspfHostInfoAreaIndexread-onlycurrentThe area index.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.4ColumnipOspfHostInfoCostread-onlycurrentThe cost of the corresponding host.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.5ColumnipOspfHostInfoStateread-onlycurrentEnable or disable an OSPF Host
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11NodeipOspfRedistributeInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1NodeipOspfRedistributeStaticInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.1ScalaripOspfRedistributeStaticInfoMetricread-onlycurrentThe metric to be assigned to static routes. A value of 0 indicates none.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.2ScalaripOspfRedistributeStaticInfoMetricTyperead-onlycurrentThe AS External metric type for static routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.1.3ScalaripOspfRedistributeStaticInfoOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2NodeipOspfRedistributeFixedInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.1ScalaripOspfRedistributeFixedInfoMetricread-onlycurrentThe export metric for fixed routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.2ScalaripOspfRedistributeFixedInfoMetricTyperead-onlycurrentThe AS External metric type for fixed routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.2.3ScalaripOspfRedistributeFixedInfoOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3NodeipOspfRedistributeRipInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.1ScalaripOspfRedistributeRipInfoMetricread-onlycurrentThe export metric for RIP routes. A value of 0 indicates none
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.2ScalaripOspfRedistributeRipInfoMetricTyperead-onlycurrentThe AS External metric type for RIP routes.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.11.3.3ScalaripOspfRedistributeRipInfoOutRmapListread-onlycurrentThe route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12TableipOspfMd5keyInfoTablenot-accessiblecurrentThe table of OSPF MD5 keys Information.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1RowipOspfMd5keyInfoEntrynot-accessiblecurrentInformation about an OSPF MD keys table.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.1ColumnipOspfMd5keyInfoIndexread-onlycurrentThe OSPF MD5 Key number for which the OSPF MdKey table is related.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.2ColumnipOspfMd5keyInfoKeyread-onlycurrentThe character string representing the MD5 Key.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4Nodelayer3Oper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1NodevrrpOper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1TablevrrpOperVirtRtrTablenot-accessiblecurrentAn entry in the table of virtual routers.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1RowvrrpOperVirtRtrEntrynot-accessiblecurrentA row in the vrrpOperVirtRtrTable
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.1ColumnvrrpOperVirtRtrIndexread-onlycurrentThe index for the VRRP virtual router.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.2ColumnvrrpOperVirtRtrBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.2ScalarvrrpOperVirtRtrGroupBackupread-writecurrentWhen set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7NodebntTraps
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.2NodebntSwDefGwUpA bntSwDefGwUp trap signifies that the default gateway is alive.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.3NodebntSwDefGwDownA bntSwDefGwDown trap signifies that the default gateway is down.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.4NodebntSwDefGwInServiceA bntSwDefGwEnabled trap signifies that the default gateway is up and in service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.5NodebntSwDefGwNotInServiceA bntSwDefGwDisabled trap signifies that the default gateway is alive but not in service.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.19NodebntSwLoginFailureA bntSwLoginFailure trap signifies that someone failed to enter a valid username/password combination.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.22NodebntSwTempExceedThresholdA bntSwTempExceedThreshold trap signifies that the switch temperature has exceeded maximum safety limits.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.27NodebntSwApplyCompleteA bntSwApplyComplete signifies that new configuration has been applied.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.28NodebntSwSaveCompleteA bntSwApplyComplete signifies that new configuration has been saved.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.29NodebntSwFwDownloadSucessA bntSwFwDownloadSuccess signifies that firmware has been downloaded to [image1|image2|boot image].
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.30NodebntSwFwDownloadFailureA bntSwFwDownloadFailure signifies that firmware downloaded failed to [image1|image2|boot image].
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.31NodebntSwTempReturnThresholdA bntSwTempReturnThreshold trap signifies that the switch temperature has returned below maximum safety limits.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.34NodebntSwUfdfoLtMFailureA bntSwUfdfoLtMFailure trap signifies that a LtM link is down.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.35NodebntSwUfdfoLtMUPA bntSwUfdfoLtMUP trap signifies that a LtM link is up.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.36NodebntSwUfdfoGlobalEnaA bntSwUfdfoGlobalEna trap signifies that Global UFD is enabled.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.37NodebntSwUfdfoGlobalDisA bntSwUfdfoGlobalDis trap signifies that Global UFD is disabled.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.38NodebntSwUfdfoLtDAutoEnaA bntSwUfdfoLtDAutoEna trap signifies that a LtD link is Auto Enabled.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.39NodebntSwUfdfoLtDAutoDisA bntSwUfdfoLtDAutoDis trap signifies that a LtD link is Auto Disabled.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.42NodebntSwStgNewRootA bntSwStgNewRoot trap signifies that the bridge has become the new root of the STG.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.43NodebntSwCistNewRootA bntSwCistNewRoot trap signifies that the bridge has become the new root of the CIST.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.44NodebntSwStgTopologyChangedA bntSwStgTopologyChanged trap signifies that there was a STG topology change.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.45NodebntSwCistTopologyChangedA bntSwCistTopologyChanged trap signifies that there was a CIST topology change.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.51NodebntSFPInsertedA bntSFPInserted trap signifies that a SFP is inserted.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.52NodebntSFPRemovedA bntSFPRemoved trap signifies that a SFP is removed.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.7.1000ScalarbntSwTrapDisplayStringread-onlycurrentTemporary string object used to store information being sent in an BNT Switch trap.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8Nodeqos
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1NodeqosConfigs
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1Nodeqos8021p
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1TableqosCurCfgPortPriorityTablenot-accessiblecurrentThe table of QOS Port Priority configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1RowqosCurCfgPortPriorityEntrynot-accessiblecurrentInformation about a particular QOS Port Priority configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.1ColumnqosCurCfgPortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.2ColumnqosCurCfgPortPriorityread-onlycurrentSwitch Port Priority Should be between 0 and 7
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2TableqosNewCfgPortPriorityTablenot-accessiblecurrentThe table of QOS Port Priority configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1RowqosNewCfgPortPriorityEntrynot-accessiblecurrentInformation about a particular QOS Port Priority configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.1ColumnqosNewCfgPortIndexread-onlycurrentSwitch Port Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.2ColumnqosNewCfgPortPriorityread-writecurrentSwitch Port Priority Should be between 0 and 7
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3TableqosCurCfgPriorityCoSTablenot-accessiblecurrentThe table of Frame Priority and COSq configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1RowqosCurCfgPriorityCoSEntrynot-accessiblecurrentInformation about a particular Frame Priority and COSq configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.1ColumnqosCurCfgPriorityIndexread-onlycurrentFrame priority Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.2ColumnqosCurCfgPriorityCoSqread-onlycurrentCoSq for a Frame Priority Should be between 0 and 7
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4TableqosNewCfgPriorityCoSTablenot-accessiblecurrentThe table of Frame Priority and COSq configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1RowqosNewCfgPriorityCoSEntrynot-accessiblecurrentInformation about a particular Frame Priority and COSq configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.1ColumnqosNewCfgPriorityIndexread-onlycurrentFrame priority Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.2ColumnqosNewCfgPriorityCoSqread-writecurrentCoSq for a Frame Priority Should be between 0 and 7
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5TableqosCurCfgCosWeightTablenot-accessiblecurrentThe table of CoSq and Weight configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1RowqosCurCfgCosWeightEntrynot-accessiblecurrentInformation about a particular CoSq and Weight configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.1ColumnqosCurCfgCosIndexread-onlycurrentCoSq Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.2ColumnqosCurCfgCosWeightread-onlycurrentWeight of CoSq
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6TableqosNewCfgCosWeightTablenot-accessiblecurrentThe table of CoSq and Weight configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1RowqosNewCfgCosWeightEntrynot-accessiblecurrentInformation about a particular CoSq and Weight configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.1ColumnqosNewCfgCosIndexread-onlycurrentCoSq Number
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.2ColumnqosNewCfgCosWeightread-writecurrentWeight of CoSq
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.9ScalarqosDefaultCfgread-writecurrentLoad default configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.2NodeqosStats
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.3NodeqosInfo
1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.4NodeqosOper
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9Nodeacl
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1NodeacConfig
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1NodeacList
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1TableaclCurCfgTablenot-accessiblecurrentThe table of current ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1RowaclCurCfgEntrynot-accessiblecurrentCurrent information about a particular ACL configuration entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.1ColumnaclCurCfgIndexnot-accessiblecurrentThe index associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.3ColumnaclCurCfgGroupread-onlycurrentThe index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.4ColumnaclCurCfgFilterActionread-onlycurrentThe action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.5ColumnaclCurCfgFilterActionSetPrioread-onlycurrentThe value to be used when the action to be performed is setprio for this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.6ColumnaclCurCfgEthFmtread-onlycurrentThe packet ethernet format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.7ColumnaclCurCfgTagFmtread-onlycurrentThe packet tag format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.8ColumnaclCurCfgIPFmtread-onlycurrentThe packet IP format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.9ColumnaclCurCfgSrcMACAddressread-onlycurrentThe source MAC address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.10ColumnaclCurCfgSrcMACMaskread-onlycurrentThe address mask applied to aclCurCfgSrcMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.11ColumnaclCurCfgDstMACAddressread-onlycurrentThe destination MAC address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.12ColumnaclCurCfgDstMACMaskread-onlycurrentThe address mask applied to aclCurCfgDstMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.13ColumnaclCurCfgEthernetTypeNameread-onlycurrentThe Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.14ColumnaclCurCfgEthernetTypeValueread-onlycurrentThe Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.15ColumnaclCurCfgVLanIdread-onlycurrentThe virtual LAN identifier to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.16ColumnaclCurCfgVLanMaskread-onlycurrentThe mask applied to aclCurCfgVLanId for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.17ColumnaclCurCfg8021pPriorityread-onlycurrentThe 802.1p priority to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.18ColumnaclCurCfgTypeOfServiceread-onlycurrentThe type of service to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.19ColumnaclCurCfgProtocolread-onlycurrentThe protocol to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.20ColumnaclCurCfgSrcIPAddressread-onlycurrentThe source IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.21ColumnaclCurCfgSrcIPMaskread-onlycurrentThe address mask applied to aclCurCfgSrcIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.22ColumnaclCurCfgDstIPAddressread-onlycurrentThe destination IP address to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.23ColumnaclCurCfgDstIPMaskread-onlycurrentThe address mask applied to aclCurCfgDstIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.24ColumnaclCurCfgSrcPortread-onlycurrentThe source TCP/UDP port number to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.25ColumnaclCurCfgSrcPortMaskread-onlycurrentThe mask applied to aclCurCfgSrcPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.26ColumnaclCurCfgDstPortread-onlycurrentThe destination TCP/UDP port number to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.27ColumnaclCurCfgDstPortMaskread-onlycurrentThe mask applied to aclCurCfgDstPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.28ColumnaclCurCfgTCPFlagsread-onlycurrentThe TCP flags to be filtered. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |_…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.29ColumnaclCurCfgEgressPortsread-onlycurrentThe port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.30ColumnaclCurCfgStatisticsread-onlycurrentWhether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.39ColumnaclCurCfgTCPFlagsMaskread-onlycurrentThe TCP flags mask. OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpACK(3) |||______tcpURG(2) ||_______reserved2(1) |________res…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.41ColumnaclCurCfgMeterActionread-onlycurrentMeter Action for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.42ColumnaclCurCfgMeterEnableread-onlycurrentMeter state for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.43ColumnaclCurCfgKbitsSecread-onlycurrentThe commited rate of meter associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.44ColumnaclCurCfgKbitsBurstread-onlycurrentThe maxmium burst sizeof meter associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.45ColumnaclCurCfgInprofUserread-onlycurrentSet in profile user defined priority for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.46ColumnaclCurCfgInprofDscpread-onlycurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.47ColumnaclCurCfgInprofTosread-onlycurrentTo enable/disable setting in profile pkts based on TOS bits.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.48ColumnaclCurCfgOutprofDscpread-onlycurrentSet out profile pkts DSCP value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.49ColumnaclCurCfgInprofUserEnableread-onlycurrentSet in profile update method for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.50ColumnaclCurCfgInprofDscpEnableread-onlycurrentWhether in profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.51ColumnaclCurCfgOutprofDscpEnableread-onlycurrentWhether out profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2TableaclNewCfgTablenot-accessiblecurrentThe table of new ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1RowaclNewCfgEntrynot-accessiblecurrentNew information about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.1ColumnaclNewCfgIndexread-onlycurrentThe index associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.3ColumnaclNewCfgGroupread-onlycurrentThe index of the ACL group to which this ACL entry is a member of. A value of zero means the ACL is not a member of any group.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.4ColumnaclNewCfgFilterActionread-writecurrentThe action to be performed on a packet that matches the filter settings of this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.5ColumnaclNewCfgFilterActionSetPrioread-writecurrentThe COS queue to be used when the action for this ACL entry is set to setprio.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.6ColumnaclNewCfgEthFmtread-writecurrentThe packet ethernet format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.7ColumnaclNewCfgTagFmtread-writecurrentThe packet tagging format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.8ColumnaclNewCfgIPFmtread-writecurrentThe packet IP format to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.9ColumnaclNewCfgSrcMACAddressread-writecurrentThe source MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcMACMask object, if not yet set, will be automatically se…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.10ColumnaclNewCfgSrcMACMaskread-writecurrentThe address mask to be applied to aclNewCfgSrcMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.11ColumnaclNewCfgDstMACAddressread-writecurrentThe destination MAC address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstMACMask object, if not yet set, will be automatical…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.12ColumnaclNewCfgDstMACMaskread-writecurrentThe address mask to be applied to aclNewCfgDstMACAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13ColumnaclNewCfgEthernetTypeNameread-writecurrentThe Ethernet type to be filtered. If the value of this object is other(7), the value of aclNewCfgEthernetTypeValue indicates the ethernet type that will be fil…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.14ColumnaclNewCfgEthernetTypeValueread-writecurrentThe Ethernet type value to be filtered. The value of this object is equivalent to the value of aclNewCfgEthernetTypeName except when the value of aclNewCfgEthe…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.15ColumnaclNewCfgVLanIdread-writecurrentThe virtual LAN identifier to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgVLanMask object, if not yet set, will be automatically …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.16ColumnaclNewCfgVLanMaskread-writecurrentThe mask to be applied to aclNewCfgVLanId for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.17ColumnaclNewCfg8021pPriorityread-writecurrentThe 802.1p priority to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.18ColumnaclNewCfgTypeOfServiceread-writecurrentThe type of service to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.19ColumnaclNewCfgProtocolread-writecurrentThe protocol to be filtered.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.20ColumnaclNewCfgSrcIPAddressread-writecurrentThe source IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set, will be automatically set …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.21ColumnaclNewCfgSrcIPMaskread-writecurrentThe address mask to be applied to aclNewCfgSrcIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.22ColumnaclNewCfgDstIPAddressread-writecurrentThe destination IP address to be filtered. Whenever this object is set to a nonzero value, the aclNewCfgDstIPMask object, if not yet set, will be automatically…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.23ColumnaclNewCfgDstIPMaskread-writecurrentThe address mask to be applied to aclNewCfgDstIPAddress for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.24ColumnaclNewCfgSrcPortread-writecurrentThe source TCP/UDP port number to be filtered. Whenever this object is set if the aclNewCfgSrcPortMask object is not set will be automatically set to 65535 (0x…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.25ColumnaclNewCfgSrcPortMaskread-writecurrentThe mask to be applied to aclNewCfgSrcPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.26ColumnaclNewCfgDstPortread-writecurrentThe destination TCP/UDP port number to be filtered. Whenever this object is set the aclNewCfgSrcPortMask object, if not yet set, will be automatically set to 6…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.27ColumnaclNewCfgDstPortMaskread-writecurrentThe mask to be applied to aclNewCfgDstPort for filtering.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.28ColumnaclNewCfgTCPFlagsread-writecurrentThe TCP flags to be filtered. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.29ColumnaclNewCfgEgressPortsread-onlycurrentThe port list in the ACL configured for egress filtering. The ports are presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... |…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.30ColumnaclNewCfgStatisticsread-writecurrentWhether statistics collection for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.31ColumnaclNewCfgAddEgressPortread-writecurrentThe port to be added to the specified ACL for egress filtering. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.32ColumnaclNewCfgRemoveEgressPortread-writecurrentThe port to be removed from the specified ACL. A value of zero is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.33ColumnaclNewCfgDeleteread-writecurrentThis is an action object to delete an ACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.39ColumnaclNewCfgTCPFlagsMaskread-writecurrentThe TCP flags mask. The TCP flags are presented in bitmap format, as follows: OCTET xxxxxxxx ||||..|| ||||..||_tcpFIN(7) ||||..|__tcpSYN(6) |||| ||||_____tcpAC…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.41ColumnaclNewCfgMeterActionread-writecurrentMeter Action for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.42ColumnaclNewCfgMeterEnableread-writecurrentMeter state for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.43ColumnaclNewCfgKbitsSecread-writecurrentThe commited rate of meter associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.44ColumnaclNewCfgKbitsBurstread-writecurrentThe maxmium burst sizeof meter associated with this ACL entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.45ColumnaclNewCfgInprofUserread-writecurrentSet in profile user defined priority for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.46ColumnaclNewCfgInprofDscpread-writecurrentSet in profile pkts DSCP value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.47ColumnaclNewCfgInprofTosread-writecurrentTo enable/disable setting in profile pkts based on TOS bits.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.48ColumnaclNewCfgOutprofDscpread-writecurrentSet out profile pkts DSCP value.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.49ColumnaclNewCfgInprofUserEnableread-writecurrentSet in profile update method for this ACL.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.50ColumnaclNewCfgInprofDscpEnableread-writecurrentWhether in profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.51ColumnaclNewCfgOutprofDscpEnableread-writecurrentWhether out profile update DSCP for this ACL is enabled or not.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.52ColumnaclNewCfgResetread-writecurrentThis is an action object to reset an ACL entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.53ColumnaclNewCfgEthernetResetread-writecurrentThis is an action object to reset an ACL Ethernet entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.54ColumnaclNewCfgIpv4Resetread-writecurrentThis is an action object to reset an ACL IPV4 entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.55ColumnaclNewCfgTcpudpResetread-writecurrentThis is an action object to reset an ACL Tcpudp entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.56ColumnaclNewCfgMeterResetread-writecurrentThis is an action object to reset an ACL Meter entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.57ColumnaclNewCfgRemarkResetread-writecurrentThis is an action object to reset an ACL Remark entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.58ColumnaclNewCfgRemarkInprofResetread-writecurrentThis is an action object to reset an ACL Remark Inprof entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.59ColumnaclNewCfgRemarkOutprofResetread-writecurrentThis is an action object to reset an ACL Remark Outprof entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.60ColumnaclNewCfgPktfmtResetread-writecurrentThis is an action object to reset an ACL Pktfmt entry. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3NodeaclGroup
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1TableaclGroupCurCfgTablenot-accessiblecurrentThe table of current ACL Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1RowaclGroupCurCfgEntrynot-accessiblecurrentInformation about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.1ColumnaclGroupCurCfgIndexread-onlycurrentThe index associated with this ACL Group entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.2ColumnaclGroupCurCfgMemberAclsread-onlycurrentThe ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2TableaclGroupNewCfgTablenot-accessiblecurrentThe table of new ACL Group configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1RowaclGroupNewCfgEntrynot-accessiblecurrentNew information about a particular ACL configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.1ColumnaclGroupNewCfgIndexread-onlycurrentThe index associated with this ACL Group entry.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.2ColumnaclGroupNewCfgMemberAclsread-onlycurrentThe ACL members of this ACL group, presented in bitmap format, as follows: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || | || || |_ ACL 9 || || || ||___ …
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.4ColumnaclGroupNewCfgAddAclread-writecurrentThe index of the ACL entry to be added into this ACL group. A successful set operation on this object will also set the bit corresponding to the ACL entry in t…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.5ColumnaclGroupNewCfgRemoveAclread-writecurrentThe index of the ACL entry to be removed from this ACL group. A successful set operation on this object will unset the bit corresponding to the ACL entry in th…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.8ColumnaclGroupNewCfgDeleteread-writecurrentThis is an action object to delete an ACL group. A value of other(1) is always returned when this object is read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4NodeaclCfg
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1TableaclCurCfgPortTablenot-accessiblecurrentThe table of port acl groups configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1RowaclCurCfgPortTableEntrynot-accessiblecurrentInformation about a particular port acl configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.1ColumnaclCurCfgPortIndexread-onlycurrentThe identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.2ColumnaclCurCfgPortAclBmapread-onlycurrentThe acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.4ColumnaclCurCfgPortAclGrpBmapread-onlycurrentThe acl groups applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2TableaclNewCfgPortTablenot-accessiblecurrentThe table of port acl configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1RowaclNewCfgPortTableEntrynot-accessiblecurrentInformation about a particular port acl groups configuration.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.1ColumnaclNewCfgPortIndexread-onlycurrentThe identifier of a particular port. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.2ColumnaclNewCfgPortAddAclread-writecurrentThe acl to be added to the specified port. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.4ColumnaclNewCfgPortAddAclGrpread-writecurrentThe acl group to be added to the specified port. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.5ColumnaclNewCfgPortRemoveAclread-writecurrentThe acl to be removed from the specified port. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.7ColumnaclNewCfgPortRemoveAclGrpread-writecurrentThe acl group to be removed from the specified port. A '0' value is returned when read.
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.8ColumnaclNewCfgPortAclBmapread-onlycurrentThe acls applied to the port. The acls are presented in bitmap format. This string displays acl number from 1 to 896. in receiving order: OCTET 1 OCTET 2 .....…
1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.10ColumnaclNewCfgPortAclGrpBmapread-onlycurrentThe acl groups applied to the port. The acl groups are presented in bitmap format. This string displays group number from 1 to 4096. in receiving order: OCTET …
MIB Viewer