BRCM-80211-FACTORY-MIB
16 objects
Broadcom cabledata private MIB for 802.11 configuration and diagnostics
Imported Objects
| BRCM-CABLEDATA-FACTORY-MIB | cableDataFactory |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.99.1.1.2.5 | Identityieee802dot11Factory | Broadcom cabledata private MIB for 802.11 configuration and diagnostics | ||
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1 | Nodedot11FactoryCfg | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.2 | Scalardot11RegDomain | read-write | deprecated | The 802.11 regulatory domain. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.3 | Scalardot11BoardRev | read-write | current | The revision of 802.11 hardware interface. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.4 | Scalardot11MaxPower | read-write | current | Sets maximum TX power for power over temperature adjustment algorithm. Used to prevent output overdrive. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.5 | Scalardot11Country | read-write | current | Restricts the channel set based on country requirements. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.6 | Scalardot11PAParameters | read-write | current | Sets PA parameters of the wireless hardware. Used by output power control algorithm. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.7 | Scalardot11IdleTSSI | read-write | current | Sets idle TSSI target of the wireless hardware. Used by output power control algorithm. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.1.8 | Scalardot11AntennaGain | read-write | current | Sets the antenna gain of the device. Used by output power control algorithm. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2 | Nodedot11FactoryDiagnostics | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.1 | Scalardot11DiagChannel | read-write | current | Sets test channel number. Obeys regulatory domain restrictions - step through regulatory domains to cover all channels. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.2 | Scalardot11DiagAntennaDiversity | read-write | current | If diversity is disabled, then this value indicates the antenna used for transmission and reception. If diversity is enabled, then this value controls the init… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.3 | Scalardot11DiagTxMode | read-write | current | cw(0) is used for frequency accuracy test, evm(1) is used for error vector test. When set to normal(2), 802.11 STAs will once again be able to associate with t… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.4 | Scalardot11DiagTxPowerLevel | read-write | current | Sets TX test power level as permitted by regulatory domain restrictions. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.5 | Scalardot11DiagWirelessLanCmd | read-write | current | Sends commands to the 802.11 diagnostic and manufacturing utility. When read, reports the last command issued. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.5.2.6 | Scalardot11DiagWirelessLanOutput | read-only | current | Reports the console output (if any) generated by the last set of the dot11DiagWirelessLanCmd object. |