BRCM-80211-MGMT-MIB
95 objects
Broadcom proprietary MIB for runtime management and configuration of objects related to the wi-fi network interface.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.2.2.1.5 | Identityieee802dot11Mgmt | Broadcom proprietary MIB for runtime management and configuration of objects related to the wi-fi network interface. | ||
| 1.3.6.1.4.1.4413.2.2.2.1.5.1 | Nodedot11MgmtBase | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.1 | Scalardot11OperMode | read-write | current | Used to control the 802.11 operational mode. If set to notAvailable(0), then the wireless interface will be disabled, with the radio off, and no wireless setti… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.2 | Scalardot11SSID | read-write | deprecated | Controls and reflects the service set identifier. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.3 | Scalardot11CurrentChannel | read-write | current | Controls and reflects the current channel number (802.11g) or control channel (802.11n). If set to (0), the AP will be put in auto-channel mode where it automa… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.4 | Scalardot11BeaconInterval | read-write | current | Controls and reflects the beacon interval for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.5 | Scalardot11DTIMInterval | read-write | current | Controls and reflects the DTIM interval for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.6 | Scalardot11FragThresh | read-write | current | Controls and reflects the fragmentation threshold for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.7 | Scalardot11RTSThresh | read-write | current | Controls and reflects the RTS threshold for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.8 | Scalardot11SRL | read-write | current | Controls and reflects the short retry limit for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.9 | Scalardot11LRL | read-write | current | Controls and reflects the long retry limit for the device. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.10 | Scalardot1154gNetMode | read-write | current | Controls and reflects the behavior of the device with regards to which flavor of 802.11 is used. If set to mode54gLRS(5), the device will interoperate with the… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.11 | Scalardot1154gProtectionEnable | read-write | current | Controls and reflects the state of 54g protection. If set to true(1), the AP will use RTS/CTS to improve 802.11g performance in mixed 802.11g/802.11b networks.… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.12 | Scalardot11Rate | read-write | current | Forces the transmission rate for the AP to a particular speed. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.13 | Scalardot11OutputPower | read-write | current | Sets the output power relative to the hardware's maximum capability. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.14 | Scalardot11MbssUserControl | read-write | current | |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.15 | Scalardot11BasicRateSet | read-write | current | Determines which rates are advertised as BASIC rates in the beacon. If set to default, the driver defaults for the selected 54gMode will be used. If set to all… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.16 | Scalardot11NMode | read-write | current | Determines which Mode the N card will run in. Auto Mode will detect which stations are out there and run in the proper mode, Off Mode will make it such the car… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.17 | Scalardot11NPhyRate | read-write | current | Forces the N Phy transmission rate for the AP to a particular speed. Each pair of rates corresponds to a 20 MHz or 40 MHz channel configuration. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.18 | Scalardot11NBand | read-write | current | Determines which Band that we will be operating in. Either the 2.4G or the 5G Hz. Note: This is for N cards only. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.19 | Scalardot11NBandWidth | read-write | current | Determines which Band Width that we will be operating in. Either the 20MHz or the 40MHz. Note: This is for N cards only, and this also affect other MIB selecti… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.20 | Scalardot11NSideBand | read-write | current | Determines which side Band the channel will operate in. Note: This is for N cards only, this mib is dependent of what dot11NBandWidth is selected and only appl… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.1.21 | Scalardot11NProtection | read-write | current | Determines if protection will be turned on or off for N mode. Note: This is for N cards only. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2 | Nodedot11MgmtPrivacy | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.1 | Scalardot11EncryptionMode | read-write | deprecated | Controls and reflects the encryption mode used by the device. If set to none(0), then encryption is disabled and all traffic will be sent in the clear. If set … |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.2 | Scalardot11WepPassPhrase | read-write | deprecated | Controls and reflects the WEP pass phrase. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.3 | Scalardot11DefaultKey | read-write | deprecated | Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the dot1164BitKeyTable if dot11Encr… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.4 | Tabledot1164BitKeyTable | not-accessible | deprecated | A table of 40 bit key values used when dot11EncryptionMode is set to wep64(1). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1 | Rowdot1164BitKeyEntry | not-accessible | deprecated | A row in the table which represents a single 64 bit key. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1.1 | Columndot1164BitKeyIndex | not-accessible | deprecated | Identifies the instance of this table row. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.4.1.2 | Columndot1164BitKeyValue | read-write | deprecated | A 40 bit key to be used when dot11EncryptionMode is set to wep64(1). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.5 | Tabledot11128BitKeyTable | not-accessible | deprecated | A table of 104 bit key values used when dot11EncryptionMode is set to wep128(2). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1 | Rowdot11128BitKeyEntry | not-accessible | deprecated | A row in the table which represents a single 128 bit key. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1.1 | Columndot11128BitKeyIndex | not-accessible | deprecated | Identifies the instance of this table row. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.5.1.2 | Columndot11128BitKeyValue | read-write | deprecated | A 104 bit key to be used when dot11EncryptionMode is set to wep128(2). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.6 | Scalardot11NetAuthMode | read-write | deprecated | Sets the network authentication method. 802.1X and WPA require that valid RADIUS parameters be set. WPA-PSK requires a valid WPA Pre-Shared Key to be set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.7 | Scalardot11WpaPreSharedKey | read-write | deprecated | Sets the WPA Pre-Shared Key (PSK). This value MUST be either a 64-digit hexadecimal number, OR a 8 to 63 character ASCII string. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.8 | Scalardot11WpaGroupRekeyInterval | read-write | deprecated | Sets the WPA Group Rekey Interval in seconds. Set to zero to disable periodic rekeying. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.9 | Scalardot11RadiusIp | read-write | deprecated | Sets RADIUS server IP address. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.10 | Scalardot11RadiusPort | read-write | deprecated | Sets the UDP port used to communicate with the RADIUS server. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.2.11 | Scalardot11RadiusKey | read-write | deprecated | Sets or displays the RADIUS key. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3 | Nodedot11MgmtAccess | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.1 | Scalardot11AuthenticationMode | read-write | deprecated | Controls the mode of authentication which will be accepted by the device. If set to sharedKeyOnly(1), then only stations which satisfy the shared key authentic… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.2 | Scalardot11ClosedNetwork | read-write | deprecated | Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beaco… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.3 | Scalardot11AccessMode | read-write | deprecated | Controls what stations will be given access to the device. If set to unrestricted(0), then any station will be allowed to connect. If set to restrictToList(1),… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.5 | Tabledot11AccessTable | not-accessible | deprecated | A table of MAC addresses which represents stations that will be allowed to connect to the device if dot11AccessMode is set to restrictToList(1). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1 | Rowdot11AccessEntry | not-accessible | deprecated | A row in the table that specifies a single station MAC address. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1.1 | Columndot11AccessIndex | not-accessible | deprecated | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.3.5.1.2 | Columndot11AccessStation | read-create | deprecated | A MAC address of a station which will be allowed to connect to the device if dot11AccessMode is set to restrictToList(1). |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4 | Nodedot11MgmtMbss | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1 | Nodedot11MbssBase | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14 | Tabledot11BssTable | not-accessible | current | A table of entries in an MBSS system. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1 | Rowdot11BssEntry | not-accessible | current | An entry describing the characteristics of an individual BSS. An entry exists in this table for each entry of type ieee80211 (71) in the ifTable. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.1 | Columndot11BssId | read-only | current | The physical address associated with this service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.2 | Columndot11BssEnable | read-write | current | Enables or disables this service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.3 | Columndot11BssSsid | read-write | current | Controls and reflects the service set identifier for this BSS. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.4 | Columndot11BssNetworkBridge | read-write | deprecated | If set to lan(1), this service set will be authorized as a member of the local area network. If set to guest(2), this service set will have access to the wide … |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.5 | Columndot11BssSecurityMode | read-write | current | Security mode may be chosen from Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise or RADIUS-WEP. All devices on the network must use the same s… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.6 | Columndot11BssClosedNetwork | read-write | current | Controls whether the device will operate in closed network mode. If set to true(1), then the network mode is closed and the SSID will not be broadcast in beaco… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.1.14.1.7 | Columndot11BssAccessMode | read-write | current | Controls what stations will be given access to the device. If set to allowAny(1), then any station will be allowed to connect. If set to restrictToList(2), the… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2 | Nodedot11MbssSecurity | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1 | Tabledot11BssWepTable | not-accessible | current | A table used to configure settings related to the WEP security modes. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1 | Rowdot11BssWepEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the dot11BssTable for which dot11BssSecurity… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.1 | Columndot11BssWepDefaultKey | read-write | current | Controls and reflects the default key which will be used when 64 or 128 bit encryption is enabled. Indicates the entry from the dot11BssWep64BitKeyTable if dot… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.2 | Columndot11BssWepEncryptionMode | read-write | current | Selects the WEP encryption method used by this service set. If set to wep64(1), then 64 bit WEP encryption will be used with the keys from the dot11BssWep64Bit… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.1.1.3 | Columndot11BssWepPassPhrase | read-write | current | The passphrase used for WEP security. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2 | Tabledot11BssWep64BitKeyTable | not-accessible | current | A table of 40 bit key values used when operating in WEP 64 mode. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1 | Rowdot11BssWep64BitKeyEntry | not-accessible | current | A key to be used by the row in the dot11BssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.1 | Columndot11BssWep64BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.2 | Columndot11BssWep64BitKeyValue | read-create | current | A 40 bit key to be used when the corresponding instance of dot11BssSecurityMode is set to wep(1) and the corresponding instance of dot11BssWepEncryptionMode is… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.2.1.3 | Columndot11BssWep64BitKeyStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3 | Tabledot11BssWep128BitKeyTable | not-accessible | current | A table of 104 bit key values used when operating in WEP 128 mode. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1 | Rowdot11BssWep128BitKeyEntry | not-accessible | current | A key to be used by the row in the dot11BssTable identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.1 | Columndot11BssWep128BitKeyIndex | not-accessible | current | Identifies an instance of a key among those used by the service set identified by the value of ifIndex in the row index. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.2 | Columndot11BssWep128BitKeyValue | read-create | current | A 104 bit key to be used when the corresponding instance of dot11BssSecurityMode is set to wep(1) and the corresponding instance of dot11BssWepEncryptionMode i… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.3.1.3 | Columndot11BssWep128BitKeyStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4 | Tabledot11BssWpaTable | not-accessible | current | A table used to configure settings related to the WPA security modes. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1 | Rowdot11BssWpaEntry | not-accessible | current | An entry defining the WPA characteristics of an individual service set. A row exists in this table for each row in the dot11BssTable for which dot11BssSecurity… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.1 | Columndot11BssWpaAlgorithm | read-write | current | Controls and reflects the WPA encryption mode used by the service set. The WPA algorithm for WPA-PSK and WPA-Enterprise security mode is either tkip(1) or aes(… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.2 | Columndot11BssWpaPreSharedKey | read-write | current | Sets the WPA Pre-Shared Key (PSK) used by this service set. This value MUST be either a 64 byte hexadecimal number, OR an 8 to 63 character ASCII string. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.4.1.3 | Columndot11BssWpaGroupRekeyInterval | read-write | current | Sets the WPA Group Rekey Interval for this service set. If set to zero, periodic rekeying is disabled for this service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5 | Tabledot11BssRadiusTable | not-accessible | current | A table used to configure settings related to the RADIUS security modes, including WPA-Enterprise, WPA2-Enterprise and RADIUS-WEP. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1 | Rowdot11BssRadiusEntry | not-accessible | current | An entry defining the RADIUS characteristics of an individual service set. A row exists in this table for each row in the dot11BssTable for which dot11BssSecur… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.1 | Columndot11BssRadiusAddressType | read-write | current | The type of internet address used for dot11BssRadiusAddress. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.2 | Columndot11BssRadiusAddress | read-write | current | The internet address of the RADIUS server for this service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.3 | Columndot11BssRadiusPort | read-write | current | The UDP port used to communicate with the RADIUS server for this service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.4 | Columndot11BssRadiusKey | read-write | current | The RADIUS key. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.2.5.1.5 | Columndot11BssRadiusReAuthInterval | read-write | current | The network re-authentication interval. If set to zero, no re-authentication will be performed. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3 | Nodedot11MbssAccess | |||
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1 | Tabledot11BssAccessTable | not-accessible | current | A table of MAC addresses which defines the MAC address based access restrictions for the system. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1 | Rowdot11BssAccessEntry | not-accessible | current | A row in the table which specifies a single MAC address for a given service set. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.1 | Columndot11BssAccessIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.2 | Columndot11BssAccessStation | read-create | current | A MAC address of a station which will be allowed to connect to the service set if dot11BssAccessMode is set to restrictToList(2), or forbidden if dot11BssAcces… |
| 1.3.6.1.4.1.4413.2.2.2.1.5.4.3.1.1.3 | Columndot11BssAccessStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). Until instances … |
| 1.3.6.1.4.1.4413.2.2.2.1.5.100 | Scalardot11ApplySettings | read-write | current | If set to true(1), the current configuration set in this MIB will be flushed to non-volatile storage, and the wi-fi driver will be restarted using this configu… |