BRCM-CM-FACTORY-MIB
71 objects
Broadcom proprietary MIB for management and configuration of cablemodem objects used in manufacturing.
Imported Objects
| BRCM-CABLEDATA-FACTORY-MIB | cableDataFactory |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.99.1.1.2.2 | IdentitycablemodemFactory | Broadcom proprietary MIB for management and configuration of cablemodem objects used in manufacturing. | ||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1 | NodecmFactoryBase | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.1 | ScalarcmFactOperMode | read-write | current | Reflects and controls the operational state of the device. If set to docsis(1), the CM will operate in the usual DOCSIS fashion. If set to diagnostic(2), the C… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.2 | ScalarcmFactSwBcmVersion | read-only | current | The Broadcom internal software version identifier of this image. This is generally not the same as docsDevSwVersion. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.3 | ScalarcmFactSwDateTime | read-only | current | The date and time that this image was built. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.4 | ScalarcmFactSwBuiltBy | read-only | current | The user ID of the individual who built this image. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.5 | ScalarcmFactSwFeatures | read-only | current | A list of features supported by this image. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.6 | ScalarcmFactAckCelEnable | read-write | current | Enables or disables Broadcom's Patent Pending AckCel technology for the CM Upstream interface. Changes to this value take effect the next time the CM registers… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.7 | ScalarcmFactNonstdUpstreamEnable | read-write | current | Enables or disables the support of non-standard upstream configurations. If enabled, the s/w will accept and use UCDs that contain proprietary non-standard mod… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.8 | ScalarcmFactPowerSaveModeEnable | read-write | current | Enables or disables power save mode. With power save mode enabled, various measures will be taken to reduce power consumption. Power save mode is primarily use… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.9 | ScalarcmFactOptimized3420FreqMapEnable | read-write | current | Enables or disables the use of the optimized frequency map for devices which use the 3420 tuner. Note that this object has no meaning if the device uses a tune… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.10 | ScalarcmFactHighOutputPAEnable | read-write | current | Enables or disables the support of high-output power amp mode on the CM. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.11 | ScalarcmFactChannelBondingEnable | read-write | current | Enables or disables the support of channel bonding. Note that this setting will only have any effect if the hardware and firmware support channel bonding. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.12 | ScalarcmFactEnabledTuners | read-write | current | Specifies the number of tuners which will be advertised to the CMTS in the CM's modem capabilities message. By advertising fewer tuners than the design actuall… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.13 | ScalarcmFactAnnex | read-write | current | Specifies the annex mode which will be used. This setting affects downstream tuning parameters including frequency list and phy level operation. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.1.14 | ScalarcmFactExtendedUsTxPowerCapability | read-write | current | Specifies the maximum extended upstream transmit power of which this device is capable. A value of zero indicates that the device has no extended upstream powe… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2 | NodecmFactoryBaselinePrivacy | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2.1 | ScalarcmBpiPublicKey | read-write | current | The baseline privacy public key for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2.2 | ScalarcmBpiPrivateKey | read-write | current | The baseline privacy public key for this device. In order to prevent unauthorized discovery of the private key, when read this object does not return the key. … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2.3 | ScalarcmBpiPlusRootPublicKey | read-write | current | The baseline privacy plus root public key for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2.4 | ScalarcmBpiPlusCmCertificate | read-write | current | The baseline privacy plus CM certificate for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.2.5 | ScalarcmBpiPlusCaCertificate | read-write | current | The baseline privacy plus CA certificate for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3 | NodecmFactoryDownstreamCalibration | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.1 | ScalarcmDsCalFrequency | read-write | current | The center of the downstream frequency to which the CM will attempt to lock when cmDsCalLockNow is set to true. Note that a read of this object does NOT necess… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.2 | ScalarcmDsCalModulation | read-write | current | The modulation type that the CM will attempt to lock under when cmDsCalLockNow is set to true. Note that a read of this object does NOT necessarily indicate th… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.3 | ScalarcmDsCalLockNow | read-write | current | When this object is set to true(1), the CM will attempt to lock to the downstream channel at a frequency specified by cmDsCalFrequency, and under the modulatio… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.4 | ScalarcmDsCalQamLocked | read-only | current | Indicates whether the last set of cmDsCalLockNow to true resulted in the CM acheiving QAM lock. Note that changing cmDsCalFrequency or cmDsCalModulation will n… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.5 | ScalarcmDsCalFecLocked | read-only | current | Indicates whether the last set of cmDsCalLockNow to true resulted in the CM acheiving FEC lock. Note that changing cmDsCalFrequency or cmDsCalModulation will n… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.6 | ScalarcmDsCalZeroOffsets | read-write | current | Setting this object to true(1) will result in all instances of cmDsCalOffset being set to a value of 0. Sets to false(2) will be accepted, but will not result … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.7 | ScalarcmDsCalNumOffsets | read-write | current | This object is read-only in normal factory mode, ie when cableDataPrivateMibEnable is set to factory(1). In that context it simply indicates the number of entr… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.8 | TablecmDsCalOffsetTable | not-accessible | current | A list offsets to be used when calculating downstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.8.1 | RowcmDsCalOffsetEntry | not-accessible | current | An entry defining the offset from calculated power at a given downstream frequency for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.8.1.1 | ColumncmDsCalOffsetIndex | not-accessible | current | Identifies the instance of this downstream calibration offset. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.8.1.2 | ColumncmDsCalOffsetFrequency | read-write | current | The downstream frequency at which this instance of cmDsCalOffsetPower. applies. In normal factory mode, ie if cableDataPrivateMibEnable is set to factory(1), t… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.8.1.3 | ColumncmDsCalOffsetPower | read-write | current | The offset from calculated downstream power that should be applied for this device at the corresponding instance of cmDsCalOffsetFrequency. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.3.9 | ScalarcmDsCalChannelNumber | read-write | current | For bonded downstream systems, this object identifies which downstream channel is to be calibrated. When the value of this object is changed, the cmDsCalOffset… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4 | NodecmFactoryUpstreamCalibration | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.1 | ScalarcmUsCalFrequency | read-write | current | The center of the upstream frequency on which the CM will transmit when cmUsCalTxPower is set. Note that a read of this object does NOT necessarily indicate th… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.2 | ScalarcmUsCalChannelWidth | read-write | current | The bandwidth of the upstream transmission which will be intiated by a set to cmUsCalTxPower. This object may be converted by a constant of 1250000 to the symb… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.3 | ScalarcmUsCalModulation | read-write | current | The modulation type that the CM will transmit under when cmUsCalTxPower is set. Note that a read of this object does NOT necessarily indicate that the CM is cu… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.4 | ScalarcmUsCalTxPower | read-write | current | A set of this object will cause the CM to begin transmitting upstream at the specified power level to the best of its ability based on current upstream calibra… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.5 | ScalarcmUsCalZeroOffsets | read-write | current | Setting this object to true(1) will result in all instances of cmUsCalOffset being set to a value of 0. Sets to false(2) will be accepted, but will not result … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.6 | ScalarcmUsCalNumOffsets | read-only | current | Indicates the number of entries in the cmUsCalOffsetTable. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.7 | TablecmUsCalOffsetTable | not-accessible | current | A list offsets to be used when calculating upstream power for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.7.1 | RowcmUsCalOffsetEntry | not-accessible | current | An entry defining the offset from calculated power at a given upstream frequency for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.7.1.1 | ColumncmUsCalOffsetIndex | not-accessible | current | Identifies the instance of this upstream calibration offset. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.7.1.2 | ColumncmUsCalOffsetFrequency | read-only | current | The upstream frequency at which this instance of cmUsCalOffsetPower. applies. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.7.1.3 | ColumncmUsCalOffsetPower | read-write | current | The offset from calculated upstream power that should be applied for this device at the corresponding instance of cmUsCalOffsetFrequency. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.4.8 | ScalarcmUsCalChannelNumber | read-write | current | For bonded upstream systems, this object identifies which upstream channel is to be calibrated. When the value of this object is changed, the cmUsCalOffsetTabl… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.5 | NodecmFactoryHardware | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.5.1 | ScalarcmHwSTATHR | read-write | current | AGC Loop Threshold |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.5.2 | ScalarcmHwSTAGI | read-write | current | IF AGC Gain Threshold |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.5.3 | ScalarcmHwSTAGT | read-write | current | RF (Tuner) AGC Gain Threshold |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.5.4 | ScalarcmHwAdvanceMapRunAheadEnable | read-write | current | Enables/disables Advance Map RunAhead support on supported hardware platforms. Advance Map RunAhead feature uses an additional Docsis Map processor to provide … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6 | NodecmFactoryOtp | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.1 | ScalarcmOtpIsProgrammed | read-only | current | Indicates if the OTP section of this chip has been programmed. Note that if this object returns true(1), all objects in this group will be read-only and any at… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.2 | ScalarcmOtpProgramNow | read-write | current | If set to true(1), initiates programming of the OTP. Setting to false(2) has no effect. Always returns false(2) when read. Note that setting this object to tru… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.3 | ScalarcmOtpProgramResult | read-only | current | Indicates the result of an attempt to program the OTP. Note that this value does not persist across a reboot, but it will provide the result of an attempt to p… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.4 | ScalarcmOtpRawBitsSize | read-only | current | Indicates the size of the OTP region in bits. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.5 | ScalarcmOtpRawBits | read-write | current | Allows reading or writing the OTP region as a raw hex value. When reading, note that only the right-most bits are valid. The number of valid bits is returned b… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.6 | ScalarcmOtpCustomerDefinedBitsSize | read-only | current | Indicates the size of the customer defined region in bits. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.7 | ScalarcmOtpCustomerDefinedBits | read-write | current | Allows reading or writing the customer defined region as a raw hex value. When reading, note that only the right-most bits are valid. The number of valid bits … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.8 | ScalarcmOtpSecurityLevel | read-write | current | Reports and controls the current security level for the cumulative set of supported OTP features for this device. This provides a platform-independent mechanis… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.9 | ScalarcmOtpJtagDisabled | read-write | current | If set to true(1), disables JTAG in hardware. If set to false(2), JTAG will remain enabled. Setting cmOtpSecurityLevel to fullSecurity(2) will cause the value … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.10 | ScalarcmOtpConsoleDisabled | read-write | current | If set to true(1), disables the serial console port in hardware. If set to false(2), serial console will remain enabled. Setting cmOtpSecurityLevel to fullSecu… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.11 | ScalarcmOtpSpiSlaveDisabled | read-write | current | If set to true(1), disables the SPI slave in hardware. If set to false(2), the SPI slave will remain enabled. Setting cmOtpSecurityLevel to fullSecurity(2) wil… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.12 | ScalarcmOtpMpiAccessControl | read-write | current | Indicates the value of the MPI access control setting. The effect of setting cmOtpSecurityLevel on the value of this object is platform-dependant. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.13 | ScalarcmOtpBootRomEnabled | read-write | current | If set to true(1), the part will boot only from ROM. If set to false(2), the part will boot from a bootloader in flash. Setting cmOtpSecurityLevel to fullSecur… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.6.14 | ScalarcmOtpRamScramblerEnabled | read-write | current | Enables or disables the RAM scrambler. Setting cmOtpSecurityLevel to fullSecurity(2) will cause the value of this object to be set to true(1). Setting cmOtpSec… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.7 | NodecmFactoryFpm | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.2.7.1 | ScalarcmFpmTokenDepletionWatchdogEnable | read-write | current | Enables or disables the free pool manager token watchdog feature. If enabled, this feature causes the CM to reboot if the FPM becomes depleted of tokens. |