BRCM-V2-FACTORY-MIB
62 objects
Broadcom proprietary MIB for factory management and configuration of objects common to the V2 software architecture.
Imported Objects
| BRCM-CABLEDATA-FACTORY-MIB | cableDataFactory |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413.2.99.1.1.2.4 | Identityv2Factory | Broadcom proprietary MIB for factory management and configuration of objects common to the V2 software architecture. | ||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1 | Nodev2FactoryNonVol | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1 | Tablev2FactNonVolTable | not-accessible | current | A list of V2 style non-volatile storage groups for this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1 | Rowv2FactNonVolEntry | not-accessible | current | An entry defining a single V2 style non-volatile storage group. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.1 | Columnv2NonVolIndex | not-accessible | current | Identifies the instance number of this entry. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.2 | Columnv2NonVolName | read-only | current | The name of this non-volatile storage group. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.3 | Columnv2NonVolMagicNumber | read-only | current | A unique four-byte identifier of this non-volatile storage group. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.4 | Columnv2NonVolVersionPermanent | read-only | current | Identifies the major and minor version of the permanent section of this non-volatile storage group in the form major.minor |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.5 | Columnv2NonVolVersionDynamic | read-only | current | Identifies the major and minor version of the dynamic section of this non-volatile storage group in the form major.minor |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.6 | Columnv2NonVolIsDefaultPermanent | read-only | current | Reports whether the permanent section of this non-volatile storage group has been modified from its default state. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.7 | Columnv2NonVolIsDefaultDynamic | read-only | current | Reports whether the dynamic section of this non-volatile storage group has been modified from its default state. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.8 | Columnv2NonVolRawData | read-only | current | The contents of this non-volatile storage group expressed as raw binary data. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.9 | Columnv2NonVolIsManufacturedPermanent | read-only | current | Reports whether the permanent section of this non-volatile storage group has been sufficiently manufactured. Criteria for manufacturing are of course specific … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.10 | Columnv2NonVolMfgHintPermanent | read-only | current | If v2NonVolIsManufacturedPermanent is false(2), this object reports a textual hint as to which settings in the group have not yet been manufactured. The nature… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.11 | Columnv2NonVolIsManufacturedDynamic | read-only | current | Reports whether the dynamic section of this non-volatile storage group has been sufficiently manufactured. Criteria for manufacturing are of course specific to… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.1.1.12 | Columnv2NonVolMfgHintDynamic | read-only | current | If v2NonVolIsManufacturedDynamic is false(2), this object reports a textual hint as to which settings in the group have not yet been manufactured. The nature o… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2 | Nodev2NonVolControl | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.1 | Scalarv2NonVolControlGroup | read-write | current | Identifies which entry in the v2FactNonVolTable will be affected by control operations from this group. Must be either a value of v2NonVolIndex or zero. If zer… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.2 | Scalarv2NonVolControlSection | read-write | current | Identifies which section of the group identified by v2NonVolControlGroup will be affected by control operations from this group. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.3 | Scalarv2NonVolRestoreDefaults | read-write | current | When set to true(1), causes the group identified by v2NonVolControlGroup to have its values restored to factory defaults. Always returns false(2) when read. Se… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.4 | Scalarv2NonVolTftpServer | read-write | current | Controls and reflects the IP address of a TFTP server from which non-vol settings will be downloaded if v2NonVolDloadNow is set to true(1), into the group spec… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.5 | Scalarv2NonVolTftpPath | read-write | current | Controls and reflects the path of a file on a TFTP server from which a non-vol settings will be downloaded if v2NonVolDloadNow is set to true(1), into the grou… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.6 | Scalarv2NonVolDloadNow | read-write | current | If set to true(1), a new non vol image will be downloaded from the IP address specified by v2NonVolDloadTftpServer, the file to download having been specified … |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.7 | Scalarv2NonVolDloadStatus | read-only | current | Indicates the status of the last non-vol download attempt. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.8 | Scalarv2NonVolDelExtraData | read-write | current | Setting this object to true(1) will get rid of any extra data that is assiociated with the settings group specified by v2NonVolControlGroup and the section spe… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.9 | Scalarv2NonVolFlush | read-write | current | Setting this object to true(1) will flush out any unrecognized groups that were read from the device. This is useful in cases where the settings group isn't ne… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.1.2.10 | Scalarv2NonVolClearDevice | read-write | current | Setting this object to true(1) will tell the nonvol device to wipe out the section specified in v2NonVolControlSection. All data will be lost; the device shoul… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2 | Nodev2FactoryImages | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1 | Nodev2ImagesBootloader | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.1 | Scalarv2BootloaderVersion | read-only | current | Identifies the version of the bootloader. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.2 | Scalarv2BootloaderSignature | read-only | current | Identifies the signature that the bootloader uses to validate downloaded firmware images. The signature in the image must match this signature or the image wil… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.3 | Scalarv2BootloaderBoardInfo | read-only | current | Identifies the board information for this board. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.4 | Scalarv2BootloaderCompressionSupport | read-only | current | Identifies which compression schemes this bootloader supports. Older bootloader versions may not support all compression schemes. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.5 | Scalarv2BootloaderIncompatibleImageCheckEnabled | read-write | current | Controls and reflects whether the bootloader will perform a compatible image check prior to executing an image. If set to true(1), an image will not be execute… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.6 | Scalarv2BootloaderDloadTftpServer | read-write | current | Controls and reflects the IP address of a TFTP server from which a new bootloader will be downloaded if v2BootloaderDloadNow is set to true(1) |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.7 | Scalarv2BootloaderDloadTftpPath | read-write | current | Controls and reflects the path of a file on a TFTP server from which a new bootloader will be downloaded if v2BootloaderDloadNow is set to true(1) |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.8 | Scalarv2BootloaderDloadNow | read-write | current | If set to true(1), a new bootloader will be downloaded from the IP address specified by v2BootloaderDloadTftpServer, the file to download having been specified… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.1.9 | Scalarv2BootloaderDloadStatus | read-only | current | Indicates the status of the last bootloader download attempt. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2 | Nodev2ImagesFirmware | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1 | Tablev2FirmwareTable | not-accessible | current | A table of firmware images on this device. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1 | Rowv2FirmwareEntry | not-accessible | current | An entry describing the characteristics of a single firmware image. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.1 | Columnv2FwIndex | not-accessible | current | Identifies the instance number of this entry. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.2 | Columnv2FwSignature | read-only | current | Identifies the firmware signature with which this image was built. If compatible image checking is enabled on the bootloader via v2BootloaderIncompatibleImageC… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.3 | Columnv2FwControl | read-only | current | A mask of flags indicating control parameters for this image. Bits 0-7 are used to indicate compression type, and higer order bits are reserved. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.4 | Columnv2FwRevision | read-only | current | Identifies the version of this software in the format major.minor. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.5 | Columnv2FwBuildTime | read-only | current | The date and time that this image was built. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.6 | Columnv2FwFileSize | read-only | current | The size of this image. Note that if an image is compressed, this value indicates the compressed size. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.7 | Columnv2FwMaxImageSize | read-only | current | The maximum size image that may be stored to this image location. Note that if an image is compressed, this value indicates the compressed size. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.8 | Columnv2FwFileName | read-only | current | The name of the file from which this image was produced. Note that the file name is extracted from the program store header, so it is possible that this object… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.9 | Columnv2FwHCS | read-only | current | The header checksum used by the bootloader when validating this image. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.1.1.10 | Columnv2FwCRC | read-only | current | The cyclic redundancy code used by the bootloader when validating this image. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2 | Nodev2FirmwareControl | |||
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.1 | Scalarv2FwControlImageNumber | read-write | current | Indicates the image from the v2ImageTable which will be controlled by operations from this group. Must be set to a valid value of v2FwIndex. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.2 | Scalarv2FwDloadTftpServer | read-write | current | Controls and reflects the IP address of a TFTP server from which the image specified in v2FwControlImageNumber will be downloaded if v2FwDloadNow is set to tru… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.3 | Scalarv2FwDloadTftpPath | read-write | current | Controls and reflects the path to a file on the server specified by v2FwDloadTftpServer which will be downloaded to the image specified by v2FwControlImageNumb… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.4 | Scalarv2FwDloadLarge | read-write | current | If set to true, a large image may be downloaded into image 1 such that it spans into image 2. This allows a 'fat' image to be downloaded onto a 'slim' board, b… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.5 | Scalarv2FwDloadForce | read-write | current | If set to true, the application will not perform any image validation on the image program header prior to loading an image. This would mainly be used to allow… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.6 | Scalarv2FwDloadNow | read-write | current | If set to true, a TFTP download will begin which will load the image from the TFTP server specified in v2FwDloadTftpServer using the file specified in v2FwDloa… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.7 | Scalarv2FwDloadStatus | read-only | current | Indicates the status of the last (or current) firmware image download attempt. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.8 | Scalarv2FwDeleteImage | read-write | current | If set to true(1), the image indicated by v2FwControlImageNumber will be deleted. Equivalent to the Docsis/clear_image command from the V2 CLI. |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.9 | Scalarv2FwCopyImageFrom | read-write | current | If this object is set, the image specified by v2FwControlImageNumber will be overwritten by the image specified by this object. Equivalent to the Docsis/copy_i… |
| 1.3.6.1.4.1.4413.2.99.1.1.2.4.2.2.2.10 | Scalarv2FwCopyStatus | read-only | current | Indicates the status of the last firmware copy attempt. |