BROCADE-ACL-MIB
49 objects
MIB module for management of ACLs.
Imported Objects
| Brocade-REG-MIB | bcsiModules |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.3.1.16 | IdentitybrocadeACLMIB | MIB module for management of ACLs. | ||
| 1.3.6.1.4.1.1588.3.1.16.0 | NodebcsiACLNotifications | |||
| 1.3.6.1.4.1.1588.3.1.16.1 | NodebcsiACLObjects | |||
| 1.3.6.1.4.1.1588.3.1.16.1.1 | TablebcsiAclNameToIdMappingTable | not-accessible | current | This table maps the string name of an ACL to its numeric ACL ID for both L2 and L3 ACLs. |
| 1.3.6.1.4.1.1588.3.1.16.1.1.1 | RowbcsiAclNameToAclIdMappingEntry | not-accessible | current | An entry in the bcsiAclNameToIdMappingTable which lists the ACl-ID for ACL-Names. |
| 1.3.6.1.4.1.1588.3.1.16.1.1.1.1 | ColumnbcsiAclNametoAclIdMappingAclName | not-accessible | current | Name of the ACL. |
| 1.3.6.1.4.1.1588.3.1.16.1.1.1.2 | ColumnbcsiAclNametoAclIdMappingAclId | read-only | current | Numeric ID of the ACL. |
| 1.3.6.1.4.1.1588.3.1.16.1.1.1.3 | ColumnbcsiAclNametoAclIdMappingAclType | read-only | current | ACL can be of two types, namely standard and extended ACL. |
| 1.3.6.1.4.1.1588.3.1.16.1.1.1.4 | ColumnbcsiAclNametoAclIdMappingAclLevel | read-only | current | Protocol Layer at which ACLs are applied. L2 and L3 are the supported levels. |
| 1.3.6.1.4.1.1588.3.1.16.1.2 | TablebcsiL2NamedAclRuleTable | not-accessible | current | Table to display the L2 Named Access Control List Information listed below among others: - Source MAC address - Source MAC mask - Destination MAC address - Des… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1 | RowbcsiL2NamedAclRuleEntry | not-accessible | current | An entry in the L2 Access Control List table. |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.1 | ColumnbcsiL2NamedAclId | not-accessible | current | Unique Numeric ID of ACL. It is the same as bcsiAclNametoAclIdMappingAclId in bcsiAclNameToIdMappingTable |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.2 | ColumnbcsiL2NamedAclSequenceNumber | not-accessible | current | Sequence number is the number associated with rules of ACL |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.3 | ColumnbcsiL2NamedAclName | read-only | current | Represents the name of each configured L2 named ACL. It is the same as bcsiAclNametoAclIdMappingAclName in bcsiAclNameToIdMappingTable |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.4 | ColumnbcsiL2NamedAclAction | read-only | current | Action to take if the ingress L2 packet matches this ACL. |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.5 | ColumnbcsiL2NamedAclSourceType | read-only | current | Source can be represented in three ways: 1. Mac address in HHHH.HHHH.HHHH format. 2. Any source mac address 3. Host specific mac address Interpretation of bcsi… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.6 | ColumnbcsiL2NamedAclSourceMac | read-write | current | Optional Source MAC address. It depends on the value of bcsiL2NamedAclSourceType. For standard(1) value of bcsiL2NamedAclSourceType, bcsiL2NamedAclSourceMac is… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.7 | ColumnbcsiL2NamedAclSourceMacMask | read-write | current | Optional Source MAC address mask. By default, it matches with any source MAC within a packet. To match on the first two bytes of the address aabb.ccdd.eeff, us… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.8 | ColumnbcsiL2NamedAclDestinationType | read-write | current | Destination can be represented in three ways. 1. Mac address in HHHH.HHHH.HHHH format. 2. Any destination mac address 3. Host specific mac address Interpretati… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.9 | ColumnbcsiL2NamedAclDestinationMac | read-write | current | Optional destination MAC address. By default, it matches with any destination MAC within a packet. It depends on the value of bcsiL2NamedAclDestinationType. Fo… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.10 | ColumnbcsiL2NamedAclDestinationMacMask | read-write | current | Optional destination MAC address mask. By default, it matches with any destination MAC within a packet. To match on the first two bytes of the address aabb.ccd… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.11 | ColumnbcsiL2NamedAclCount | read-write | current | Indicates if the user has enabled/disabled count for number of packets against which the configured action is taken, for a given rule |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.12 | ColumnbcsiL2NamedAclCopySflow | read-write | current | Indicates whether to sample the packet for sflow collection or not |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.13 | ColumnbcsiL2NamedAclDropPrecedenceForce | read-write | current | Force ingress drop precedence |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.14 | ColumnbcsiL2NamedAclVlanTagFormat | read-write | current | Vlan tag format can be of 3 types, namely single-tagged, double-tagged and untagged. When neither of these 3 types of tag are used, the feild is represented by… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.15 | ColumnbcsiL2NamedAclInnerVlanId | read-write | current | vlan ID of the tagged inner vlan. If bcsiL2NamedAclVlanTagFormat is double-tagged(2), then 0 value of this field indicates any. |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.16 | ColumnbcsiL2NamedAclOuterVlanId | read-write | current | Vlan ID of the tagged outer vlan. If bcsiL2NamedAclVlanTagFormat is double-tagged(2), then 0 value of bcsiL2NamedAclInnerVlanId indicates any. |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.17 | ColumnbcsiL2NamedAclVlanId | read-write | current | Optional VLAN ID to match against that of the incoming packet. By default, the VLAN ID field is ignored during the match. In this case, value 0 is returned. Th… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.18 | ColumnbcsiL2NamedAclEthernetType | read-write | current | Ethernet Type to match against the 'Ethertype' field in the L2 header of the incoming packet. By default, etype field is ignored during the match. Applicable f… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.19 | ColumnbcsiL2NamedAclArpGuard | read-write | current | Represents enabling/disabling of arp-gurad for a given ACL |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.20 | ColumnbcsiL2NamedAclDot1Priority | read-write | current | The priority option assigns traffic that matches the ACL to a hardware forwarding queue. In addition to changing the internal forwarding priority, if the outgo… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.21 | ColumnbcsiL2NamedAclDot1PriorityForce | read-write | current | The priority-force option assigns packets of outgoing traffic that match the ACL to a specific hardware forwarding queue, even though the incoming packet may b… |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.22 | ColumnbcsiL2NamedAclMirrorPackets | read-write | current | Mirror packets matching ACL permit clause. Applicable for Extended ACLs only |
| 1.3.6.1.4.1.1588.3.1.16.1.2.1.23 | ColumnbcsiL2NamedAclLogEnable | read-write | current | Optional parameter to enable logging only when deny clause is specified. Note that traffic denied by implicit deny mechanism is not subject to logging. The imp… |
| 1.3.6.1.4.1.1588.3.1.16.1.3 | TablebcsiAclIfBindTable | not-accessible | current | Table for binding L2 and L3 ACLs to interfaces. - One cannot bind Layer 2 ACLs and Layer 3 ACLs to the same port. However, configuration can be made on one por… |
| 1.3.6.1.4.1.1588.3.1.16.1.3.1 | RowbcsiAclIfBindEntry | not-accessible | current | An entry in the L2 and L3 ACL binding table which lists the ACL bindings to an interface. |
| 1.3.6.1.4.1.1588.3.1.16.1.3.1.1 | ColumnbcsiAclIfBindDirection | not-accessible | current | Direction in which this ACL should be applied on this port. |
| 1.3.6.1.4.1.1588.3.1.16.1.3.1.2 | ColumnbcsiAclIfBindAclName | read-create | current | Represents the Name of each configured L2 or L3 named ACL. It is the same as bcsiAclNametoAclIdMappingAclName in bcsiAclNameToIdMappingTable |
| 1.3.6.1.4.1.1588.3.1.16.2 | NodebcsiACLConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BcsiAclAction | INTEGER { deny(1), permit(2), hardDrop(3) } | current | The action to be taken on the packet after filtering is done. |
| BcsiAclLevel | INTEGER { l2(1), ipv4(2), ipv6(3) } | current | ACLs can be defined at various levels of the OSI model |
| BcsiAclMacType | INTEGER { standard(1), any(2), host(3) } | current | Ways of representing the source mac address. The souce mac address will be accepted in the following 3 formats: Mac address in HHHH.HHHH.HHHH format, Any source mac address, Host specific mac address. |
| BcsiAclNameString | OCTET STRING (SIZE (0..255)) | current | The name for a given access-list. |
| BcsiAclType | INTEGER { standard(1), extended(2) } | current | Type of ACL, extended or standard. |
| BcsiDropPrecedenceForce | INTEGER { zero(0), one(1), two(2) } | current | Represents Priority |
| BcsiPortQosTC | INTEGER { level1(1), level2(2), level3(3), level4(4), level5(5), level6(6), level7(7), level0(8), invalid(127) } | current | The port QOS Priority hardware queue. 1 is lowest priority, 8 is the highest. |
| BcsiTrafficDirection | INTEGER { inbound(1), outbound(2) } | current | The packet flow direction within an interface for which ACL needs to be applied. |
| BcsiVlanIdOrNoneTC | Unsigned32 (0 | 1..4090) | current | The VLAN-ID that uniquely identifies a specific VLAN, or no VLAN. The special value of zero is used to indicate that no VLAN-ID is present or used. This can be used in any situation where an object or a table entry must… |
| BcsiVlanTagFormat | INTEGER { singleTagged(1), doubleTagged(2), untagged(3) } | current | A VLAN can be untagged, single tagged or double tagged |