BROCADE-SYSTEM-MIB
82 objects
The MIB module is for system information. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved.
Imported Objects
| Brocade-TC | SwPortIndex SwSensorIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| SWBASE-MIB | sw |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.0 | IdentityswTrapsV2 | current | The Traps for Brocade's Switch. | |
| 1.3.6.1.4.1.1588.2.1.1.1.0.3 | NotificationswFCPortScn | current | This trap is sent whenever an FC port operational status or its type changed. The events that trigger this trap are port goes to online/offline, port type chan… | |
| 1.3.6.1.4.1.1588.2.1.1.1.0.4 | NotificationswEventTrap | current | This trap is generated when an event whose level at or below swEventTrapLevel occurs. | |
| 1.3.6.1.4.1.1588.2.1.1.1.0.12 | NotificationswStateChangeTrap | current | This trap is sent whenever switch state changes to online/offline | |
| 1.3.6.1.4.1.1588.2.1.1.1.1 | IdentityswSystem | The MIB module is for system information. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved. | ||
| 1.3.6.1.4.1.1588.2.1.1.1.1.1 | ScalarswCurrentDate | read-only | current | The current date information in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.2 | ScalarswBootDate | read-only | current | The date and time when the system last booted, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.3 | ScalarswFWLastUpdated | read-only | current | The information indicates the date when the firmware was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.4 | ScalarswFlashLastUpdated | read-only | current | The information indicates the date when the FLASH was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.5 | ScalarswBootPromLastUpdated | read-only | current | The information indicates the date when the boot PROM was last updated, in displayable textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.6 | ScalarswFirmwareVersion | read-only | current | The current version of the firwmare. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.7 | ScalarswOperStatus | read-only | current | The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external port; o offline(2) means the … |
| 1.3.6.1.4.1.1588.2.1.1.1.1.10 | ScalarswSsn | read-only | current | The soft serial number of the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.11 | ScalarswFlashDLOperStatus | read-only | current | The operational status of the FLASH. The operational states are as follow: o swCurrent(1) indicates that the FLASH contains the current firmware image or confi… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.12 | ScalarswFlashDLAdmStatus | read-only | current | The state of the FLASH. o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgrade(2) means that the firmware in… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.18 | ScalarswBeaconOperStatus | read-only | current | The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and ri… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.19 | ScalarswBeaconAdmStatus | read-only | current | The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right t… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.20 | ScalarswDiagResult | read-only | current | The result of the power-on startup (POST) diagnostics. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.21 | ScalarswNumSensors | read-only | current | The number of sensors inside the switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22 | TableswSensorTable | not-accessible | current | The table of sensor entries. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1 | RowswSensorEntry | not-accessible | current | An entry of the sensor information. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.1 | ColumnswSensorIndex | read-only | current | This object identifies the sensor. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.2 | ColumnswSensorType | read-only | current | This object identifies the sensor type. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.3 | ColumnswSensorStatus | read-only | current | The current status of the sensor. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.4 | ColumnswSensorValue | read-only | current | The current value (reading) of the sensor. The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability t… |
| 1.3.6.1.4.1.1588.2.1.1.1.1.22.1.5 | ColumnswSensorInfo | read-only | current | Additional displayable information on the sensor. In V2.x, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.24 | ScalarswID | read-only | current | The number of the logical switch (0/1). |
| 1.3.6.1.4.1.1588.2.1.1.1.1.25 | ScalarswEtherIPAddress | read-only | current | The IP Address of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.26 | ScalarswEtherIPMask | read-only | current | The IP Mask of the Ethernet interface of this logical switch. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.29 | ScalarswIPv6Address | not-accessible | current | IPV6 address. |
| 1.3.6.1.4.1.1588.2.1.1.1.1.30 | ScalarswIPv6Status | not-accessible | current | The current status of ipv6 address. |
| 1.3.6.1.4.1.1588.2.1.1.1.2 | IdentityswFabric | current | The OID sub-tree for swFabric group. | |
| 1.3.6.1.4.1.1588.2.1.1.1.2.15 | ScalarswVfId | read-only | current | The Virtual fabric id. |
| 1.3.6.1.4.1.1588.2.1.1.1.6 | IdentityswFCport | current | The OID sub-tree for swFCport group. | |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2 | TableswFCPortTable | not-accessible | current | A table that contains, one entry for each switch port, configuration and service parameters of the port. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1 | RowswFCPortEntry | not-accessible | current | An entry containing the configuration and service parameters of the switch port. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 | ColumnswFCPortIndex | read-only | current | This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index … |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 | ColumnswFCPortType | read-only | current | This object identifies the type of switch port. It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6). |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 | ColumnswFCPortPhyState | read-only | current | This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noTransceiver(2) no Transceiver module in this port. noGb… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 | ColumnswFCPortOpStatus | read-only | current | This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unknown(0) state indicates that li… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 | ColumnswFCPortAdmStatus | read-write | current | The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. The testing(3) state indicates th… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 | ColumnswFCPortLinkState | read-write | current | This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (o… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 | ColumnswFCPortTxType | read-only | current | This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver lw(2) long wave laser sw(3) sho… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 | ColumnswFCPortTxWords | read-only | current | This object counts the number of Fibre Channel words that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 | ColumnswFCPortRxWords | read-only | current | This object counts the number of Fibre Channel words that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 | ColumnswFCPortTxFrames | read-only | current | This object counts the number of (Fibre Channel) frames that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 | ColumnswFCPortRxFrames | read-only | current | This object counts the number of (Fibre Channel) frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 | ColumnswFCPortRxC2Frames | read-only | current | This object counts the number of Class 2 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 | ColumnswFCPortRxC3Frames | read-only | current | This object counts the number of Class 3 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 | ColumnswFCPortRxLCs | read-only | current | This object counts the number of Link Control frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 | ColumnswFCPortRxMcasts | read-only | current | This object counts the number of Multicast frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 | ColumnswFCPortTooManyRdys | read-only | current | This object counts the number of times when RDYs exceeds the frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 | ColumnswFCPortNoTxCredits | read-only | current | This object counts the number of times when the transmit credit has reached zero. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 | ColumnswFCPortRxEncInFrs | read-only | current | This object counts the number of encoding error or disparity error inside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 | ColumnswFCPortRxCrcs | read-only | current | This object counts the number of CRC errors detected for frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 | ColumnswFCPortRxTruncs | read-only | current | This object counts the number of truncated frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 | ColumnswFCPortRxTooLongs | read-only | current | This object counts the number of received frames that are too long. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 | ColumnswFCPortRxBadEofs | read-only | current | This object counts the number of received frames that have bad EOF delimiter. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 | ColumnswFCPortRxEncOutFrs | read-only | current | This object counts the number of encoding error or disparity error outside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 | ColumnswFCPortRxBadOs | read-only | current | This object counts the number of invalid Ordered Sets received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 | ColumnswFCPortC3Discards | read-only | current | This object counts the number of Class 3 frames that the port has discarded. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 | ColumnswFCPortMcastTimedOuts | read-only | current | This object counts the number of Multicast frames that has been timed out. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 | ColumnswFCPortTxMcasts | read-only | current | This object counts the number of Multicast frames that has been transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 | ColumnswFCPortLipIns | read-only | current | This object counts the number of Loop Initializations that has been initiated by loop devices attached. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 | ColumnswFCPortLipOuts | read-only | current | This object counts the number of Loop Initializations that has been initiated by the port. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 | ColumnswFCPortLipLastAlpa | read-only | current | This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 | ColumnswFCPortWwn | read-only | current | The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH; the 12-bit port identifier re… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 | ColumnswFCPortSpeed | read-write | current | The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5), or 10GB (6). Some of the above values may… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 | ColumnswFCPortName | read-only | current | A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 | ColumnswFCPortSpecifier | read-only | current | This string indicates the physical port number of the addressed port. The format of the string is: <slot>/port, where 'slot' being present only for bladed syst… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 | ColumnswFCPortFlag | read-only | current | A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is virtual or physical. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 | ColumnswFCPortBrcdType | read-only | current | The Brocade port type. |
| 1.3.6.1.4.1.1588.2.1.1.1.8 | IdentityswEvent | current | The OID sub-tree for swEvent group. | |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5 | TableswEventTable | not-accessible | current | The table of event entries. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1 | RowswEventEntry | not-accessible | current | An entry of the event table. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.1 | ColumnswEventIndex | read-only | current | This object identifies the event entry. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.2 | ColumnswEventTimeInfo | read-only | current | This object identifies the date and time when this event occurred, in textual format. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.3 | ColumnswEventLevel | read-only | current | This object identifies the severity level of this event entry. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.4 | ColumnswEventRepeatCount | read-only | current | This object identifies how many times this particular event has occurred. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.5 | ColumnswEventDescr | read-only | current | This object identifies the textual description of the event. |
| 1.3.6.1.4.1.1588.2.1.1.1.8.5.1.6 | ColumnswEventVfId | read-only | current | This object identifies the Virtual fabric id. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcPortFlag | BITS { physical (0), virtual (1) } | current | Represents the port status for a FC Flag. Currently this will indicate if the port is virtual or physical. |