BSUCLK-MIB
8 objects
This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus will communicate with the BSU during their own boot up and set their own clock time to that of BSU. Time at the BSU can be set either through SNTP or manually. It is recommended to use SNTP to obtain time.
Imported Objects
| ANIROOT-MIB | bsu |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.4 | IdentityaniBsuClock | This module is used to configure the clock time on the BSU. BSUs need to obtain and set their current clock time at boot up. Sus will communicate with the BSU … | ||
| 1.3.6.1.4.1.4325.3.4.1 | ScalaraniBsuClkSntpTimeZone | read-write | current | This is used to set the appropriate Time Zone offset from GMT. The format of data should be +Hour:Min or -Hour:Min. The valid Hour should be between -13 to +14… |
| 1.3.6.1.4.1.4325.3.4.2 | ScalaraniBsuClkSntpDstEnable | read-write | current | This shows whether Daylight Saving is enabled or not. It gives user the option to incorporate Daylight Saving Time in the configuration. |
| 1.3.6.1.4.1.4325.3.4.3 | ScalaraniBsuClkSntpDstStart | read-write | current | Used to specify the start of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - hour. Can and must be set onl… |
| 1.3.6.1.4.1.4325.3.4.4 | ScalaraniBsuClkSntpDstEnd | read-write | current | Used to specify the end of Daylight Saving Time which should be entered in the 'mmddhh' format where m - month, d - day and h - hour. Can and must be set only … |
| 1.3.6.1.4.1.4325.3.4.5 | ScalaraniBsuClkSntpEnable | read-write | current | This flag is used to enable(1) or disable(2) SNTP. It is recommended to use SNTP rather than manually setting the time to avoid errors in clock times simply du… |
| 1.3.6.1.4.1.4325.3.4.6 | ScalaraniBsuClkManualTime | read-write | current | Used to specify the local clock time manually. It should be entered in the 'mm/dd/yyyy hh:mm:ss' format that is, month/day/year hour:minute:second. When the us… |
| 1.3.6.1.4.1.4325.3.4.7 | ScalaraniBsuClkCurrentTime | read-only | current | The Current Time in 'mm/dd/yy hh:mm:ss' format, that is, month/day/year hour:minute:second. |