BSUSTATUS-MIB
24 objects
This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU.
Imported Objects
| ANIROOT-MIB | bsu |
| BSUWIRELESSIF-MIB | aniBsuWirelessPort |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.1 | IdentityaniBsuStatus | This group shows the Status Information for the BSU. The aniBsuStatusRadioTable shows the information for each radio that is connected to the BSU. | ||
| 1.3.6.1.4.1.4325.3.1.1 | ScalaraniBsuStatusBootState | read-only | current | Shows the current state of the BSU. |
| 1.3.6.1.4.1.4325.3.1.2 | ScalaraniBsuStatusSysUpTime | read-only | current | Time for which the system has been up and running, displayed as a string in 'days hours mins secs' format. |
| 1.3.6.1.4.1.4325.3.1.3 | ScalaraniBsuStatusNumPortsConf | read-only | current | The number of wireless ports configured. |
| 1.3.6.1.4.1.4325.3.1.4 | ScalaraniBsuStatusNumPortsPresent | read-only | current | The number of wireless ports actually available. |
| 1.3.6.1.4.1.4325.3.1.5 | ScalaraniBsuStatusSuCounts | read-only | current | The total SUs linked to the BSU. |
| 1.3.6.1.4.1.4325.3.1.6 | ScalaraniBsuStatusCellName | read-only | current | The name of the Cell this BSU belongs to. When BSU is in point to point mode, this parameter is not applicable and will display an empty string. Similarly for … |
| 1.3.6.1.4.1.4325.3.1.7 | ScalaraniBsuStatusCellRadius | read-only | current | The Cell Radius in km. When BSU is in point to point mode, this object can be referred to as link distance. |
| 1.3.6.1.4.1.4325.3.1.8 | ScalaraniBsuStatusSyncTimingRef | read-only | current | This flag shows whether timing reference is internal (1) or external (2) for this BSU. When BSU is running in point to point mode, this object is not-applicabl… |
| 1.3.6.1.4.1.4325.3.1.9 | ScalaraniBsuStatusRipFlag | read-only | current | This flag shows whether RIP is enabled(1) or disabled(2) for this BSU. This is always disabled when BSU is in bridge mode. |
| 1.3.6.1.4.1.4325.3.1.10 | ScalaraniBsuStatusMode | read-only | current | The mode of the BSU. |
| 1.3.6.1.4.1.4325.3.1.11 | TableaniBsuStatusRadioTable | not-accessible | current | This table shows the status of each radio that is connected to the BSU. The radio has to be operational for information to be displayed. The radio status is sh… |
| 1.3.6.1.4.1.4325.3.1.11.1 | RowaniBsuStatusRadioEntry | not-accessible | current | An entry with objects that provide information for each radio connected to the BSU. |
| 1.3.6.1.4.1.4325.3.1.11.1.1 | ColumnaniBsuStatusRadioSerialNum | read-only | current | The serial number of the radio board. |
| 1.3.6.1.4.1.4325.3.1.11.1.2 | ColumnaniBsuStatusRadioFrequency | read-only | current | The radio frequency in MHz. |
| 1.3.6.1.4.1.4325.3.1.11.1.3 | ColumnaniBsuStatusRadioBand | read-only | current | The radio frequency band. |
| 1.3.6.1.4.1.4325.3.1.11.1.4 | ColumnaniBsuStatusRadioEepromRev | read-only | current | The radio EEPROM content revision number. |
| 1.3.6.1.4.1.4325.3.1.11.1.5 | ColumnaniBsuStatusRadioVRFlag | read-only | current | The status of the voltage regulator. |
| 1.3.6.1.4.1.4325.3.1.11.1.6 | ColumnaniBsuStatusRadioSynth1Lock | read-only | current | The status of the radio synthesizer 1 lock. |
| 1.3.6.1.4.1.4325.3.1.11.1.7 | ColumnaniBsuStatusRadioSynth2Lock | read-only | current | The status of the radio synthesizer 1 lock. |
| 1.3.6.1.4.1.4325.3.1.11.1.8 | ColumnaniBsuStatusRadioTxGain | read-only | current | The radio transmit gain in dB. |
| 1.3.6.1.4.1.4325.3.1.11.1.9 | ColumnaniBsuStatusRadioRxGain | read-only | current | The radio receive gain in dB. |
| 1.3.6.1.4.1.4325.3.1.11.1.10 | ColumnaniBsuStatusRadioCurrentTxMaxPower | read-only | current | The radio current transmit maxium power in dBm |
| 1.3.6.1.4.1.4325.3.1.11.1.11 | ColumnaniBsuStatusRadioIfCableLoss | read-only | current | The calculated IF cable loss in dB |