BUNDLE-MIB
87 objects
Bundle MIB for defining bundle parameters
Imported Objects
| NT-ENTERPRISE-DATA-MIB | ntEnterpriseDataTasmanMgmt |
| SNMPv2-CONF | NOTIFICATION-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.73.1.1.1.13 | IdentitynnbundleMib | Bundle MIB for defining bundle parameters | ||
| 1.3.6.1.4.1.562.73.1.1.1.13.1 | TablennbundleTable | not-accessible | current | Bundle management related parameters are defined in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1 | RownnbundleTableEntry | not-accessible | current | Bundle parameter entries are listed in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.1 | ColumnnnbundleId | not-accessible | current | bundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned internally by the system. Whenever a … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.2 | ColumnnnbundleName | read-create | current | Name of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. The maximum length of a bundle … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.3 | ColumnnnbundleContact | read-create | current | Name of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters. This parameter can be set aft… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.4 | ColumnnnbundleDescr | read-create | current | Brief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundle is named and before the link… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.5 | ColumnnnbundleEncapsulation | read-create | current | Specifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle must first be encapsulated with… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.6 | ColumnnnbundleDropEs | read-create | current | The length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bun… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.7 | ColumnnnbundleDropSes | read-create | current | The length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter can be configured only for mult… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.8 | ColumnnnbundleDropUas | read-create | current | The length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be configured only for multilink… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.9 | ColumnnnbundleDropEev | read-create | current | The length of time in seconds that the error condition ESF Error Events exists before a link is dropped. This parameter can be configured only for multilink bu… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.10 | ColumnnnbundleDropBes | read-create | current | The length of time in seconds that the error condition Bursty Errored Seconds (Applicable only for T1 links) exists before a link is dropped. This parameter ca… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.11 | ColumnnnbundleDropBbe | read-create | current | The length of time in seconds that the error condition Threshold for Background Blocked Errors (Applicable only for E1 links) exists before a link is dropped. … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.12 | ColumnnnbundleDropLofc | read-create | current | The length of time in seconds that the error condition Loss Of Frame Count exists before a link is dropped. This parameter can be configured only for multilink… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.13 | ColumnnnbundleDropBpv | read-create | current | The length of time in seconds that the error condition BiPolar Violation exists before a link is dropped. This parameter can be configured only for multilink b… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.14 | ColumnnnbundleDropCss | read-create | current | The length of time in seconds that the error condition Controlled Slip Second exists before a link is dropped. This parameter can be configured only for multil… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.15 | ColumnnnbundleDropOof | read-create | current | The length of time in seconds that the error condition Out Of Frame exists before a link is dropped. This parameter can be configured only for multilink bundle… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.16 | ColumnnnbundleDropCrc | read-create | current | The length of time in seconds that the error condition Cyclic Redundancy Check exists before a link is dropped. This parameter can be configured only for multi… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.17 | ColumnnnbundleIpAddr | read-create | current | The bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured only when the b… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.18 | ColumnnnbundleSubnetMask | read-create | current | This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter is set … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.19 | ColumnnnbundleSrcForwardingAddrPrimary | read-create | current | The bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured when the b… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.20 | ColumnnnbundleSrcForwardingAddrSecondary | read-create | current | The bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.21 | ColumnnnbundleRestoreMethod | read-write | current | bundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.22 | ColumnnnbundleLinkRestoralTime | read-create | current | Error-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the bundleRestoreMethod is automat… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.23 | ColumnnnbundleStatus | read-write | current | bundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are present |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.24 | ColumnnnbundleLinkRestore | read-write | current | bundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod is manual. The user needs to … |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.25 | ColumnnnbundleNoOfLinks | read-only | current | Indicates the number of links configured in the bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.26 | ColumnnnbundleTotalBw | read-only | current | Indicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a particular bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.27 | ColumnnnbundleRowStatus | read-create | current | bundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a bundle. In order to add a row… |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.28 | ColumnnnbundleIpUnnumbered | read-create | current | Name of the bundle. To configure unnumbered, this parameter must be set. The maximum length of a bundle name is 8 characters. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.29 | ColumnnnbundleIpMulticast | read-create | current | Specifies the Ip multicast operation. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.30 | ColumnnnbundleDirectedBcast | read-create | current | Enable/disable forwarding of directed broadcasts on this interface. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.31 | ColumnnnbundleIcmpUnreachable | read-create | current | Enable/disable ICMP destination unreachable messages on this interface |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.32 | ColumnnnbundleIcmpRedirect | read-create | current | Enable/disable ICMP redirect messages on this on this interface |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.33 | ColumnnnbundleClearCounters | read-create | current | Perform a clearing of the counters operation |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.34 | ColumnnnbundleTrackHoldDownTimer | read-create | current | Indicates the tracking hold down timer. |
| 1.3.6.1.4.1.562.73.1.1.1.13.1.1.35 | ColumnnnbundleDropPackets | read-only | current | The number of packets dropped by a WAN interface when the agent encounters packet drops due to lack of buffer availability for transmission etc. Also, packets … |
| 1.3.6.1.4.1.562.73.1.1.1.13.2 | TablennbundleLinkTable | not-accessible | current | All the parameters related to the assigned links of a bundle are defined in bundleLinkTable. A row in this table can be created when a bundle with the correspo… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1 | RownnbundleLinkEntry | not-accessible | current | Link parameters that relate to a given bundle are specified in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.1 | ColumnnnbundleLinkT1Num | not-accessible | current | bundleLinkT1Num is the number of the T1 link being added to a specific bundle. For example, to assign link number 4, the value of this parameter should be set … |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.2 | ColumnnnbundleLinkTimeSlots | read-create | current | bundleLinkTimeSlots indicates the DS0 channels in a fractional T1 link. The LSB in the OCTET STRING represents DS0 channel number 1. For example, to assign DS0… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.3 | ColumnnnbundleLinkType | read-create | current | bundleLinkType specifies the interface type (i.e.,CT3,T1,T3,HSSI,V35,X21,S530,S530A,S449,S232 etc.,) of the link being assigned to the bundle. This is a mandat… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.4 | ColumnnnbundleLinkSpeed | read-create | current | The bundleLinkSpeed specifies the transmission speed of all DS0 channels in a bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.5 | ColumnnnbundleLinkInvertedData | read-create | current | Setting bundleLinkInvertedData parameter to true will have the system invert data on all DS0 channels before transmission. Data inversion is used only for HDLC… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.6 | ColumnnnbundleLinkPhysIfNum | read-create | current | bundleLinkPhysIfNum specifies the interface number of the interface type such as CT3, HSSI, T3 on which this link is being created. This variable holds signifi… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.7 | ColumnnnbundleLinkDiffDelay | read-only | current | bundleLinkDiffDelay specifies the maximum differential delay allowed on the links in a multilink bundle. If the packet delay on any link exceeds the differenti… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.8 | ColumnnnbundleLinkBw | read-only | current | bundleLinkBw indicates the bandwidth of the link. The bandwidth of an individual link depends upon its configuration. For example, in a link of type T1, its ba… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.9 | ColumnnnbundleLinkStatus | read-only | current | bundleLinkStatus indicates whether a particular link in a bundle is up or down. The link can go down due to various reasons such as differential delay, a broke… |
| 1.3.6.1.4.1.562.73.1.1.1.13.2.1.10 | ColumnnnbundleLinkRowStatus | read-create | current | bundleLinkRowStatus is used to add or delete a row in the table. To create a row, this parameter is set to value 4(createAndGo). To delete a row, this paramete… |
| 1.3.6.1.4.1.562.73.1.1.1.13.3 | TablennbundleTrackTable | not-accessible | current | All the parameters related to bundle tracking are includede in BundleTrackTable. |
| 1.3.6.1.4.1.562.73.1.1.1.13.3.1 | RownnbundleTrackEntry | not-accessible | current | Bundle Track parameters that relate to a given bundle are specified in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.13.3.1.1 | ColumnnntrackIntfId | not-accessible | current | trackIntfId is the identifier of the bundle being tracked. |
| 1.3.6.1.4.1.562.73.1.1.1.13.3.1.2 | ColumnnntrackIntfName | read-create | current | Name of the bundle being tracked. |
| 1.3.6.1.4.1.562.73.1.1.1.13.3.1.3 | ColumnnntrackIntfStatus | read-only | current | bundleStatus displays the status of the bundle being tracked. |
| 1.3.6.1.4.1.562.73.1.1.1.13.3.1.4 | ColumnnntrackIntfRowStatus | read-create | current | Used to configure or delete a tracking interface. To configure a interface, set the value of this object to createAndGo. To delete a interface, set the value o… |
| 1.3.6.1.4.1.562.73.1.1.1.13.4 | TablennloopbackIfTable | not-accessible | current | A list of Loopback Interface table entries for this entity. |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1 | RownnloopbackIfTableEntry | not-accessible | current | Loopback Interface parameter entries are listed in this table. |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.1 | ColumnnnloopbackIfId | not-accessible | current | loopbackIfId is the identifier of a loopback Interface. To configure a loopback, this parameter must be used as the index. This is assigned internally by the s… |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.2 | ColumnnnloopbackIfName | read-create | current | Name of the loopback If. To configure a loopback Interface,this parameter must be set. That is, a descriptive name should be given to a loopback inteface. The … |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.3 | ColumnnnloopbackIfIpAddr | read-create | current | The loopback's source IP address. This is one of the parameters required to set up loopback interface. The parameters loopbackIfIpAddr and loopbackIfSubnetMask… |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.4 | ColumnnnloopbackIfSubnetMask | read-create | current | This parameter represents the source subnet mask address. This is one of the parameters required to set up loopback interface. This parameter is set along with… |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.5 | ColumnnnloopbackIfStatus | read-only | current | loopbackIfStatus shows the current status of the loopback interface. |
| 1.3.6.1.4.1.562.73.1.1.1.13.4.1.6 | ColumnnnloopbackIfRowStatus | read-create | current | loopbackIfRowStatus is used to add/delete a row In the table. Adding or deleting a row corresponds to creating a loopback or deleting a loopback. In order to a… |
| 1.3.6.1.4.1.562.73.1.1.1.13.5 | NodennbundleTraps | |||
| 1.3.6.1.4.1.562.73.1.1.1.13.5.0 | NodennbundleNotifications | |||
| 1.3.6.1.4.1.562.73.1.1.1.13.5.0.1 | NotificationnnbundleDownTrap | current | Trap being generated when a bundle goes down. | |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.0.2 | NotificationnnbundleUpTrap | current | Trap being generated when a bundle comes up. | |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.0.3 | NotificationnnlinkDownTrap | current | Trap being generated when a link from a bundle goes down. | |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.0.4 | NotificationnnlinkUpTrap | current | Trap being generated when a link whihin a bundle comes up. | |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1 | NodennbundleTrapVariables | |||
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.1 | ScalarnnbundleNameStr | accessible-for-notify | current | Name of the bundle going UP/DOWN. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.2 | ScalarnnbundleDownCause | accessible-for-notify | current | Reason for the bundle going down admin_delete - bundle has been deleted by administrator, admin_down - bundle has been disabled administratively, l1-failure - … |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.3 | ScalarnnbundleContactInfo | accessible-for-notify | current | Name of the person who can be contacted for information about the bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.4 | ScalarnnbundleDescrInfo | accessible-for-notify | current | Brief description of the bundle. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.5 | ScalarnnlinkNum | accessible-for-notify | current | linkNum is the number of the T1/E1 link. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.6 | ScalarnnlinkType | accessible-for-notify | current | linkType specifies the interface type (i.e., CT3, T1, FT1, T3, E1, FE1, v35 and HSSI) of the link. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.7 | ScalarnnlinkCt3Num | accessible-for-notify | current | linkCt3Num specifies the interface number of the CT3/CE3 interface. This variable holds significance only for link type t1-within-ct3 and e1-within-ce3. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.8 | ScalarnnlinkDownCause | accessible-for-notify | current | Reason for the bundle going down admin-delete - link has been removed/deleted from the bundle by the administrator, admin-down - physical link has been disable… |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.9 | ScalarnnlinkBundleName | accessible-for-notify | current | Name of the bundle in which the link belongs to. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.10 | ScalarnnlinkCircuitId | accessible-for-notify | current | Configured cuircuit Id of the link |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.11 | ScalarnnlinkContactInfo | accessible-for-notify | current | Configured contact string of the link |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.12 | ScalarnnlinkNameInfo | accessible-for-notify | current | Name of the link |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.1.13 | ScalarnnlinkDescrInfo | accessible-for-notify | current | Brief description of link |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.2 | ScalarnnenableBundleUpDownNotification | read-write | current | Indicates whether the system produces the BundleDownTrap & BundleUpTrap . The default is yes. |
| 1.3.6.1.4.1.562.73.1.1.1.13.5.3 | ScalarnnenableLinkUpDownNotification | read-write | current | Indicates whether the system produces the linkDownTrap & linkUpTrap . The default is yes. |
| 1.3.6.1.4.1.562.73.1.1.1.13.6 | GroupnnbundleNotificationGroup | current | The BUNDLE MIB Notification Group. |