Brcm-adapterInfo-MIB
28 objects
No module-level DESCRIPTION found.
Imported Objects
| INET-ADDRESS-MIB | InetAddressIPv6 |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4413 | Nodebroadcom | |||
| 1.3.6.1.4.1.4413.1 | Nodeenet | |||
| 1.3.6.1.4.1.4413.1.2 | Nodebasp | |||
| 1.3.6.1.4.1.4413.1.2.1 | NodebaspConfig | |||
| 1.3.6.1.4.1.4413.1.2.2 | NodebaspStat | |||
| 1.3.6.1.4.1.4413.1.2.3 | NodebaspTrap | |||
| 1.3.6.1.4.1.4413.1.3 | NodeifControllers | |||
| 1.3.6.1.4.1.4413.1.3.1 | ScalarifiNumber | read-only | mandatory | The number of Broadcom network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.4413.1.3.2 | TableifiTable | not-accessible | mandatory | A list of Broadcom network interface entries. The number of entries is given by the ifiNumber. |
| 1.3.6.1.4.1.4413.1.3.2.1 | RowifiEntry | not-accessible | mandatory | An entry containing statistics objects of a Broadcom network interface in this system. |
| 1.3.6.1.4.1.4413.1.3.2.1.1 | ColumnifiIndex | not-accessible | mandatory | An unique value for each Broadcom interface. The value for each interface must remain constant at least from one re-initialization of the entity's network mana… |
| 1.3.6.1.4.1.4413.1.3.2.1.2 | ColumnifName | read-only | mandatory | A textual string containing name of the adapter or team |
| 1.3.6.1.4.1.4413.1.3.2.1.3 | ColumnifiDescr | read-only | mandatory | A textual string containing the adapter or team description |
| 1.3.6.1.4.1.4413.1.3.2.1.4 | ColumnifNetworkAddress | read-only | mandatory | IP address of the adapter. |
| 1.3.6.1.4.1.4413.1.3.2.1.5 | ColumnifSubnetMask | read-only | mandatory | IP subnet Mask of the adapter. |
| 1.3.6.1.4.1.4413.1.3.2.1.6 | ColumnifiPhysAddress | read-only | mandatory | MAC address of the adapter. |
| 1.3.6.1.4.1.4413.1.3.2.1.7 | ColumnifPermPhysAddress | read-only | mandatory | Permanent MAC address of the adapter. |
| 1.3.6.1.4.1.4413.1.3.2.1.8 | ColumnifLinkStatus | read-only | mandatory | Adapter link status, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.9 | ColumnifState | read-only | mandatory | The operating mode of the driver, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.10 | ColumnifLineSpeed | read-only | mandatory | The operating speed of the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.11 | ColumnifDuplexMode | read-only | mandatory | Adapter duplex mode, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.12 | ColumnifMemBaseLow | read-only | mandatory | memory low range of the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.13 | ColumnifMemBaseHigh | read-only | mandatory | memory high range of the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.14 | ColumnifInterrupt | read-only | mandatory | IRQ value for the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.15 | ColumnifBusNumber | read-only | mandatory | PCI Bus Number where the Adapter is situated, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.16 | ColumnifDeviceNumber | read-only | mandatory | PCI Device Number of the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.17 | ColumnifFunctionNumber | read-only | mandatory | PCI Function Number of the adapter, this information only applicable to the Broadcom adapter |
| 1.3.6.1.4.1.4413.1.3.2.1.18 | ColumnifIpv6NetworkAddress | read-only | mandatory | IPv6 address of the adapter. |