C-PRODUCT-BASE-MIB
114 objects
No module-level DESCRIPTION found.
Imported Objects
| C-PRODUCT-GROUP-MIB | card circuit fault port shelf sys |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1 | NodesysGenInfo | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.1 | ScalarsysGenInfoShelfName | read-write | mandatory | Name of the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.2 | ScalarsysGenInfoCustomerName | read-write | mandatory | Name of the organization that uses the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.3 | ScalarsysGenInfoPhoneNumber | read-write | mandatory | Phone number of the organization that uses the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.4 | ScalarsysGenInfoMaintenanceContact | read-write | mandatory | Maintenance contact of the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.5 | ScalarsysGenInfoLocation | read-write | mandatory | Location of the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.6 | ScalarsysGenInfoAutoLogoutTime | read-write | mandatory | The time a TELNET or VT-100 terminal user can maintain a session with the managed node without any keyboard action. Unit: minute |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.7 | ScalarsysGenInfoPassword | read-write | mandatory | Password required to access the managed node using VT-100 terminal or TELNET. A get request always returns a NULL string. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.1.8 | ScalarsysGenCurrentCodeRelease | read-only | mandatory | Firmware revision of the current code running in the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.2 | ScalarsysTimeAndDate | read-write | mandatory | Time and date maintained in the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3 | NodesysIpConfig | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.1 | NodesysIpConfigLocalHost | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.1.1 | ScalarsysIpConfigLocalHostCommunityName | read-write | mandatory | Community name of the managed node. A get request always returns a NULL string. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.1.2 | ScalarsysIpConfigLocalHostIpAddress | read-only | mandatory | Local host's Ethernet IP address. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.1.3 | ScalarsysIpConfigLocalHostSubnetMask | read-only | mandatory | Local host's Ethernet IP subnet mask. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.1.4 | ScalarsysIpConfigLocalHostMacAddress | read-only | mandatory | Local host's Ethernet MAC-layer address. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.2 | NodesysIpConfigTrapGateway | |||
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.2.1 | ScalarsysIpConfigTrapGatewayIpAddress | read-write | mandatory | Trap gateway's IP address. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.2.2 | ScalarsysIpConfigTrapGatewaySubnetMask | read-write | mandatory | Trap gateway's IP subnet mask. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3 | TablesysIpConfigTrapClientTable | not-accessible | mandatory | Trap client table has 4 entries |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3.1 | RowsysIpConfigTrapClientEntry | not-accessible | mandatory | Each entry contains IP address and port number of an SNMP manager which receives traps from the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3.1.1 | ColumnsysIpConfigTrapClientIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3.1.2 | ColumnsysIpConfigTrapClientIpAddress | read-write | mandatory | Trap client's IP address. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3.1.3 | ColumnsysIpConfigTrapClientSubnetMask | read-write | mandatory | Trap client's IP subnet mask. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.3.3.1.4 | ColumnsysIpConfigTrapClientPortNumber | read-write | mandatory | Trap client's port number. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4 | TablesysRs232Table | not-accessible | mandatory | This table contains 2 rows. The first row shows the physical configuration of the port connected to a VT100 termianl. The second row is used to configure the p… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1 | RowsysRs232Entry | not-accessible | mandatory | Each entry contains the attributes of a serial port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1.1 | ColumnsysRs232Port | not-accessible | mandatory | The managed node has 2 serial ports: port 1 and port 2. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1.2 | ColumnsysRs232BaudRate | read-write | mandatory | Baud rate. The instance of this object in port-1 is read-only. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1.3 | ColumnsysRs232Parity | read-write | mandatory | Parity. The instance of this object in port-1 is read-only. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1.4 | ColumnsysRs232DataBits | read-write | mandatory | Number of data bits. The instance of this object in port-1 is read-only. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.4.1.5 | ColumnsysRs232StopBits | read-write | mandatory | Number of stop bits. The instance of this object in port-1 is read-only. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.5 | ScalarsysRefClock | read-write | mandatory | System reference clock maintained in the managed node. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.1.6 | ScalarsysProductType | read-only | mandatory | System Product Type contain type of product. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.1 | ScalarshelfSerialNumber | read-only | mandatory | Serial number of the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.2 | ScalarshelfRevision | read-only | mandatory | Hardware revision number of the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.3 | TableshelfPowerSupplyTable | not-accessible | mandatory | The power supply table in the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.3.1 | RowshelfPowerSupplyEntry | not-accessible | mandatory | Information of the power supply in the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.3.1.1 | ColumnshelfPowerSupplySlot | not-accessible | mandatory | Slot number of the power supply. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.3.1.2 | ColumnshelfPowerSupplyAdminStatus | read-write | mandatory | Administrative status. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.3.1.3 | ColumnshelfPowerSupplyOperStatus | read-only | mandatory | Operational status for Power Supply. In AB9300/AB9100, it doesn't support any setting value. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.2.4 | ScalarshelfPartNumber | read-only | mandatory | Part number of the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1 | TablecardBaseTable | not-accessible | mandatory | A 6 entry card table in the shelf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1 | RowcardBaseEntry | not-accessible | mandatory | Each card entry contains objects that refer to the card in that entry. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.1 | ColumncardSlot | not-accessible | mandatory | Slot number of the card in the shelf. The assignment of the card slots is as follows: slot 1 : management cpu, slot 2 : ctx card, slot 3 : one of the trunk car… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.2 | ColumncardTypeDb | read-write | mandatory | The configured card type in the slot. It may differ from the actual card type (cardTypeHw) in the corresponding slot. A set request will be accepted only when … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.3 | ColumncardTypeHw | read-only | mandatory | The actual card type in the slot. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.4 | ColumncardAdminStatus | read-write | mandatory | Administrative status of the card. An error is returned if this slot has been selected as the system reference clock and an attempt is made to change this obje… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.5 | ColumncardOperStatus | read-only | mandatory | Operational status of the card. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.6 | ColumncardSerialNumber | read-only | mandatory | Serial number of the card. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.7 | ColumncardRevision | read-only | mandatory | Hardware revision number of the card. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.8 | ColumncardPartNumber | read-only | mandatory | Part number of the card. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.9 | ColumncardReset | read-write | mandatory | This is the command to reset the card at the specified slot number. A read request always returns 0. Warning: Reseting card will temporarily disrupt traffic on… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.3.1.1.10 | ColumncardShelfState | read-only | mandatory | Operational shelf state of the card. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1 | TableportBaseTable | not-accessible | mandatory | The port information table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1 | RowportBaseEntry | not-accessible | mandatory | Each port entry contains objects that refer to the port in that entry. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1.1 | ColumnportSlot | not-accessible | mandatory | Slot Number. This table does not have objects for management cpu (slot #1) and ctx card (slot #2). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1.2 | ColumnportNumber | not-accessible | mandatory | Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card typ… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1.3 | ColumnportAdminStatus | read-write | mandatory | Administrative status of the port. An error is returned if this port has been selected as the system reference clock and an attempt is made to change this obje… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1.4 | ColumnportOperStatus | read-only | mandatory | Operational status of the port. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.4.1.1.5 | ColumnportIfIndex | read-only | mandatory | Currently this object applies to the interface ports in port cards ONLY. It is pre-assigned as following: slot range 3 1..8 4 9..16 5 17..24 6 25..32 7 33..40 … |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.2 | ScalarvcpNextAvailGlobVcSideId | read-only | mandatory | This unique value which identified the next available virtual circuit ID. It is allowed NMS manager to get the next available Virtual Circuit Id before created… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3 | TablevcpBaseTable | not-accessible | mandatory | The base virtual circuit table contains the common information for both sides of circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1 | RowvcpBaseEntry | not-accessible | mandatory | Information of the base virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.1 | ColumnvcpSideAId | not-accessible | mandatory | A unique value which identifies the SideA of circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.2 | ColumnvcpSideBId | not-accessible | mandatory | A unique value which identifies the SideB of circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.3 | ColumnvcpLinkType | read-write | mandatory | Vc Circuit Type indicated whether this circuit is Regular, Multicast, Management, Unicast, leaf. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.4 | ColumnvcpDescription | read-write | mandatory | Vc description of circuits. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.5 | ColumnvcpAdminStatus | read-write | mandatory | Vc administrative status. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.3.1.6 | ColumnvcpRowStatus | read-write | mandatory | This object indicates the action to be taken by a set request. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4 | TablevcpSideTable | not-accessible | mandatory | The side table contains the Side A or Side B of circuit information. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1 | RowvcpSideEntry | not-accessible | mandatory | Information of the base virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.1 | ColumnvcpSideId | not-accessible | mandatory | unique number associated with virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.2 | ColumnvcpSideSlot | read-write | mandatory | Slot Number. This table does not have objects for ctx card (slot #2) and card (slot #3). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.3 | ColumnvcpSidePort | read-write | mandatory | Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card typ… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.4 | ColumnvcpSideTransmitVpi | read-write | mandatory | Port card transmit vpi. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.5 | ColumnvcpSideTransmitVci | read-write | mandatory | Port card transmit vci. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.6 | ColumnvcpSideReceiveVpi | read-write | mandatory | Port card receive vpi. The value range 0..255 applies when VPI-only translation is requested. Otherwise, its range is 0..15. If the value of an instance of thi… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.7 | ColumnvcpSideReceiveVci | read-write | mandatory | Port card receive vci. If the value of this object is 0, VPI-only translation is requested. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.8 | ColumnvcpSidePriority | read-write | mandatory | Priority queue is to prioritize the circuit. The smallest number is the highest priority. The largest number is lowest priority. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.4.1.9 | ColumnvcpSidePacketDiscard | read-write | mandatory | Packet Discard indicates whether this packet needs to drop off based on the threshold. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5 | TablevcpMappingSideTable | not-accessible | mandatory | The Mapping side table contains circuit Side information. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1 | RowvcpMappingSideEntry | not-accessible | mandatory | Information of the base virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.1 | ColumnvcpMappingSideSlot | not-accessible | mandatory | Slot Number. This table does not have objects for ctx card (slot #2) and card (slot #3). |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.2 | ColumnvcpMappingSidePort | not-accessible | mandatory | Port number. The number of ports in each card depends on the type of card in that slot. Following is a list of cards and the port range of that cards: card typ… |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.3 | ColumnvcpMappingSideAId | not-accessible | mandatory | SideA ID is a unique number associated with virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.4 | ColumnvcpMappingSideBId | not-accessible | mandatory | SideB ID is a unique number associated with virtual circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.5 | ColumnvcpMappingCardType | read-only | mandatory | card Type associated with mySide of circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.6 | ColumnvcpMappingFamCardType | read-only | mandatory | Family Card Type associate with mySide of circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.7 | ColumnvcpMappingOtherCardType | read-only | mandatory | Other Side of Card Type associate with the circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.5.5.1.8 | ColumnvcpMappingOtherFamCardType | read-only | mandatory | Other Side of Family Card Type associate with the circuit. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.1 | ScalarfaultClearCurrentAlarms | read-write | mandatory | A set request clears all entries in the current alarm table. A get/get-next request returns 0. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.2 | ScalarfaultClearHistoryAlarms | read-write | mandatory | A set request clears all entries in the history alarm table. A get/get-next request returns 0. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3 | TablefaultCurrentAlarmTable | not-accessible | mandatory | Current alarm table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1 | RowfaultCurrentAlarmEntry | not-accessible | mandatory | Each entry in the table contains the information of a currently active alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.1 | ColumnfaultCurrentAlarmTag | not-accessible | mandatory | The tag of the alarm in the current alarm table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.2 | ColumnfaultCurrentAlarmAlarmType | read-only | mandatory | Alarm type. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.3 | ColumnfaultCurrentAlarmSeverity | read-only | mandatory | Alarm severity. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.4 | ColumnfaultCurrentAlarmCardType | read-only | mandatory | Card type of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.5 | ColumnfaultCurrentAlarmCardNumber | read-only | mandatory | Slot number of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.6 | ColumnfaultCurrentAlarmPortNumber | read-only | mandatory | The port number of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.7 | ColumnfaultCurrentAlarmSetTime | read-only | mandatory | The time when the alarm was set. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.3.1.8 | ColumnfaultCurrentAlarmDescription | read-only | mandatory | A readable string which describes the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4 | TablefaultHistoryAlarmTable | not-accessible | mandatory | History/Information alarm table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1 | RowfaultHistoryAlarmEntry | not-accessible | mandatory | Each entry in the history alarm table contains either a cleared alarm or an information alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.1 | ColumnfaultHistoryAlarmTag | not-accessible | mandatory | The tag of the alarm in the history alarm table. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.2 | ColumnfaultHistoryAlarmAlarmType | read-only | mandatory | Alarm type. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.3 | ColumnfaultHistoryAlarmSeverity | read-only | mandatory | Severity of the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.4 | ColumnfaultHistoryAlarmCardType | read-only | mandatory | Card type of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.5 | ColumnfaultHistoryAlarmCardNumber | read-only | mandatory | Slot number of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.6 | ColumnfaultHistoryAlarmPortNumber | read-only | mandatory | Port number of the card which caused the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.7 | ColumnfaultHistoryAlarmSetTime | read-only | mandatory | The time when the alarm was set. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.8 | ColumnfaultHistoryAlarmDescription | read-only | mandatory | A readable string which describes the alarm. |
| 1.3.6.1.4.1.2011.2.1.1.1.1.6.4.1.9 | ColumnfaultHistoryAlarmClearTime | read-only | mandatory | The time when the alarm was cleared. |