CABLE-DIAG-MIB
17 objects
The MIB module for determining the status of the cables attached to the device
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.58 | IdentityswCableDiagMIB | The MIB module for determining the status of the cables attached to the device | ||
| 1.3.6.1.4.1.171.12.58.1 | NodeswCableDiagCtrl | |||
| 1.3.6.1.4.1.171.12.58.1.1 | TableswEtherCableDiagTable | not-accessible | current | A table that contains the cable situation for each port. |
| 1.3.6.1.4.1.171.12.58.1.1.1 | RowswEtherCableDiagEntry | not-accessible | current | A list of cable situations for each port on the device. |
| 1.3.6.1.4.1.171.12.58.1.1.1.1 | ColumnswEtherCableDiagPortIndex | read-only | current | This object indicates the module's port number.(1..Max port number in the module) |
| 1.3.6.1.4.1.171.12.58.1.1.1.2 | ColumnswEtherCableDiagPortType | read-only | current | Indicates the supported port data rate classification. |
| 1.3.6.1.4.1.171.12.58.1.1.1.3 | ColumnswEtherCableDiagLinkStatus | read-only | current | This object indicates the link status. |
| 1.3.6.1.4.1.171.12.58.1.1.1.4 | ColumnswEtherCableDiagPair1Status | read-only | current | This object indicates the status of pair 1 of the cable. |
| 1.3.6.1.4.1.171.12.58.1.1.1.5 | ColumnswEtherCableDiagPair2Status | read-only | current | This object indicates the status of pair 2 of the cable. |
| 1.3.6.1.4.1.171.12.58.1.1.1.6 | ColumnswEtherCableDiagPair3Status | read-only | current | This object indicates the status of pair 3 of the cable. |
| 1.3.6.1.4.1.171.12.58.1.1.1.7 | ColumnswEtherCableDiagPair4Status | read-only | current | This object indicates the status of pair 4 of the cable. |
| 1.3.6.1.4.1.171.12.58.1.1.1.8 | ColumnswEtherCableDiagPair1Length | read-only | current | This object indicates the approx. length or length to the failure of pair 1 of the cable. This value is in meter units. |
| 1.3.6.1.4.1.171.12.58.1.1.1.9 | ColumnswEtherCableDiagPair2Length | read-only | current | This object indicates the approx. length or length to the failure of pair 2 of the cable. This value is in meter units. |
| 1.3.6.1.4.1.171.12.58.1.1.1.10 | ColumnswEtherCableDiagPair3Length | read-only | current | This object indicates the approx. length or length to the failure of pair 3 of the cable. This value is in meter units. |
| 1.3.6.1.4.1.171.12.58.1.1.1.11 | ColumnswEtherCableDiagPair4Length | read-only | current | This object indicates the approx. length or length to the failure of pair 4 of the cable. This value is in meter units. |
| 1.3.6.1.4.1.171.12.58.1.1.1.12 | ColumnswEtherCableDiagAction | read-write | current | Function to run the cable diagnostic on selected port. |
| 1.3.6.1.4.1.171.12.58.1.1.1.13 | ColumnswEtherCableDiagStatus | read-only | current | Indicates the status of cable diagnostics on the port. not-run - cable diagnostics has never been run for this port processing - cable diagnostics is currently… |