CALISTA-DPA-MIB
36 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7505 | Nodecalista | |||
| 1.3.6.1.4.1.7505.1 | Nodeproducts | |||
| 1.3.6.1.4.1.7505.1.1 | Nodedpa | |||
| 1.3.6.1.4.1.7505.1.1.1 | ScalarserialNumber | read-only | mandatory | Unique value assigned to each DPA device. |
| 1.3.6.1.4.1.7505.1.1.2 | ScalarimageVersion | read-only | mandatory | The version of the main image code that the DPA is currently running. |
| 1.3.6.1.4.1.7505.1.1.3 | ScalarloaderVersion | read-only | mandatory | The version of the boot loader code that the DPA is currently running. |
| 1.3.6.1.4.1.7505.1.1.4 | ScalarintegrationMode | read-only | mandatory | The integration mode in which the DPA is currently operating: unconfigured the factory setting; the DPA requires configuring before it can be connected to an O… |
| 1.3.6.1.4.1.7505.1.1.5 | ScalarpbxType | read-only | mandatory | The PBX type that the DPA is currently emulating in order to communicate with the Octel voicemail system. This also determines the protocol used on the digital… |
| 1.3.6.1.4.1.7505.1.1.6 | ScalarreceivedCalls | read-only | mandatory | The number of IP telephony calls made to this DPA. This includes all calls, regardless of whether the Octel answered. This could happen, for instance, if the o… |
| 1.3.6.1.4.1.7505.1.1.7 | ScalaroutgoingCallsMade | read-only | mandatory | The number of calls originated by the Octel which go through the DPA. These include networking calls (communication between peer Octel systems), pager and mobi… |
| 1.3.6.1.4.1.7505.1.1.8 | ScalarmwiCommandsReceived | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator received by this DPA from the Octel voicemail system. These commands are relayed to the Cisc… |
| 1.3.6.1.4.1.7505.1.1.9 | ScalarpbxQueuedMWICommands | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator which are queued within the DPA, waiting to be sent to the PBX. These commands will be issue… |
| 1.3.6.1.4.1.7505.1.1.10 | ScalarpbxCompletedMWICommands | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator which have been successfully sent to the PBX. If the DPA is not operating in hybrid mode, th… |
| 1.3.6.1.4.1.7505.1.1.11 | ScalarpbxMWIErrors | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator that the DPA was unable to send successfully to the PBX. Such commands will have been discar… |
| 1.3.6.1.4.1.7505.1.1.12 | ScalarcallManagerQueuedMWICommands | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator which are queued within the DPA, waiting to be sent to Cisco CallManager. |
| 1.3.6.1.4.1.7505.1.1.13 | ScalarcallManagerCompletedMWICommands | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator which have been successfully sent to Cisco CallManager. |
| 1.3.6.1.4.1.7505.1.1.14 | ScalarcallManagerMWIErrors | read-only | mandatory | The number of commands to set or clear a Message Waiting Indicator that the DPA was unable to send successfully to Cisco CallManager. Such commands will have b… |
| 1.3.6.1.4.1.7505.1.1.15 | TableportTable | not-accessible | mandatory | A list of the available ports on the DPA, with current state information for each. |
| 1.3.6.1.4.1.7505.1.1.15.1 | RowportEntry | not-accessible | mandatory | An entry containing all relevant information for a DPA port. |
| 1.3.6.1.4.1.7505.1.1.15.1.1 | ColumnportIndex | read-only | mandatory | A unique value for each port. Its value ranges from 1 to the total number of ports. |
| 1.3.6.1.4.1.7505.1.1.15.1.2 | ColumnportType | read-only | mandatory | How this port is currently being used: notInUse not currently in use (may become active later) octel connected to an Octel voicemail system pbx connected to a … |
| 1.3.6.1.4.1.7505.1.1.15.1.3 | ColumnportTelephonyLinkState | read-only | mandatory | The state of the digital telephony link. This field only has meaning for physical ports connected to Octel voicemail systems or digital PBX systems. For virtua… |
| 1.3.6.1.4.1.7505.1.1.15.1.4 | ColumnportCallManagerLinkState | read-only | mandatory | The state of this port's connection to a Cisco CallManager, if such a connection exists. For ports connected to digital PBX systems (see the portType entry) th… |
| 1.3.6.1.4.1.7505.1.1.15.1.5 | ColumnportCallState | read-only | mandatory | Once a port's required link(s) to an Octel / PBX and CallManager have become active, it then becomes available for use placing calls between the two realms. Th… |
| 1.3.6.1.4.1.7505.1.1.15.1.6 | ColumnportDeviceName | read-only | mandatory | The device name under which this port is registered with Cisco CallManager. |
| 1.3.6.1.4.1.7505.1.1.15.1.7 | ColumnportCodecInUse | read-only | mandatory | If there is a call in progress on this port, this entry gives the codec in use, otherwise it will return none. |
| 1.3.6.1.4.1.7505.1.1.15.1.8 | ColumnportErrors | read-write | mandatory | The number of centiseconds during which PBX protocol errors were detected for this port. It is normal for there to be some errors, especially during port initi… |
| 1.3.6.1.4.1.7505.1.1.15.1.9 | ColumnportDacLevel | read-only | mandatory | The DAC level for the port; this is related to the voltage level on the digital telephony port, and is only used in diagnosis of internal hardware faults. |
| 1.3.6.1.4.1.7505.1.1.16 | TablecallManagerConnectionTable | not-accessible | mandatory | A list of all of the Cisco CallManager connections that the DPA is currently maintaining. |
| 1.3.6.1.4.1.7505.1.1.16.1 | RowcallManagerConnectionEntry | not-accessible | mandatory | An entry containing all relevant information for a connection to a Cisco CallManager device. |
| 1.3.6.1.4.1.7505.1.1.16.1.1 | ColumncmConnectionPortIndex | read-only | mandatory | Corresponds to portIndex in PortEntry. |
| 1.3.6.1.4.1.7505.1.1.16.1.2 | ColumncmConnectionIndex | read-only | mandatory | The index of this connection; each port can have connections to several Cisco CallManagers, with one active connection and the rest operating in standby mode. |
| 1.3.6.1.4.1.7505.1.1.16.1.3 | ColumncmConnectionCallManagerName | read-only | mandatory | The host name, if known, of the CallManager to which this connection refers. |
| 1.3.6.1.4.1.7505.1.1.16.1.4 | ColumncmConnectionIpAddress | read-only | mandatory | The IP address of the CallManager to which this connection refers. |
| 1.3.6.1.4.1.7505.1.1.16.1.5 | ColumncmConnectionIpPort | read-only | mandatory | The TCP port number on the CallManager to which this connection has been made. |
| 1.3.6.1.4.1.7505.1.1.16.1.6 | ColumncmConnectionState | read-only | mandatory | The current state of this connection. The possible values have the following meanings: idle initial state of the link before a connection has been attempted, a… |