CAMBIUM-NETWORKS-AUTO-ATTACH-MIB
168 objects
This MIB module contains objects related to the Auto-Attach support.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17713 | Nodecambium | |||
| 1.3.6.1.4.1.17713.24 | NodecnMatrix | |||
| 1.3.6.1.4.1.17713.24.1 | IdentitycnAutoAttachMib | This MIB module contains objects related to the Auto-Attach support. | ||
| 1.3.6.1.4.1.17713.24.1.0 | NodecnAutoAttachNotifications | |||
| 1.3.6.1.4.1.17713.24.1.0.1 | NotificationcnAutoAttachInterfacePolicyApplied | current | This notification is generated when Auto-Attach operation applies a policy to an interface. | |
| 1.3.6.1.4.1.17713.24.1.0.2 | NotificationcnAutoAttachInterfacePolicyExpired | current | This notification is generated when Auto-Attach operation removes policy settings from an interface. | |
| 1.3.6.1.4.1.17713.24.1.1 | NodecnAutoAttachObjects | |||
| 1.3.6.1.4.1.17713.24.1.1.1 | ScalarcnAutoAttachService | read-write | current | Exports the status of the Auto-Attach service. |
| 1.3.6.1.4.1.17713.24.1.1.2 | ScalarcnAutoAttachDataDiffAllowed | read-write | current | The number of data discrepancies allowed before applied policy settings are deleted. A data discrepancy occurs when current device identification data differs … |
| 1.3.6.1.4.1.17713.24.1.1.3 | ScalarcnAutoAttachDeviceDataCompare | read-write | current | Specifies the string comparison mode used for device identification. A setting of 'caseSensitive(1)' indicates the character case is taken into account when de… |
| 1.3.6.1.4.1.17713.24.1.1.4 | ScalarcnAutoAttachClearPolicyStats | read-write | current | Clears Auto-Attach statistics for all policies. Setting this attribute to 'true(1)' clears all counters. The value 'false(2)' is returned when the attribute is… |
| 1.3.6.1.4.1.17713.24.1.1.5 | ScalarcnAutoAttachClearInterfaceStats | read-write | current | Clears Auto-Attach statistics on all device interfaces. Setting this attribute to 'true(1)' clears all counters. The value 'false(2)' is returned when the attr… |
| 1.3.6.1.4.1.17713.24.1.1.6 | ScalarcnAutoAttachUpdatePortDesc | read-write | current | When enabled, the port description is potentially updated when a PBA policy is applied to the port. Updates occur only if the current port description is empty… |
| 1.3.6.1.4.1.17713.24.1.1.7 | ScalarcnAutoAttachRestrictedMacMatch | read-write | current | When enabled, additional checks are performed during evaluation of MAC address-based policies to ensure that they are only applied to ports on which only a sin… |
| 1.3.6.1.4.1.17713.24.1.1.8 | ScalarcnAutoAttachActivePolicyReorder | read-write | current | When enabled, definition of a new policy and existing policy precedence updates cause active policy re-evaluation to occur. Currently applied policies, even if… |
| 1.3.6.1.4.1.17713.24.1.1.9 | ScalarcnAutoAttachMacPolicyAging | read-write | current | When enabled, applied MAC-based policies are cleared on an interface when the associated MAC address is aged-out and removed from the FDB. When disabled, appli… |
| 1.3.6.1.4.1.17713.24.1.1.10 | TablecnAutoAttachPortTable | not-accessible | current | This table contains port-specific data for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.10.1 | RowcnAutoAttachPortEntry | not-accessible | current | Port-specific data related to the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.1 | ColumncnAutoAttachPortIfIndex | not-accessible | current | Port (ifIndex) identifier attribute. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.2 | ColumncnAutoAttachPortState | read-create | current | The current port state from an Auto-Attach perspective. Indicates whether remote device data associated with the port will be examined for Auto-Attach processi… |
| 1.3.6.1.4.1.17713.24.1.1.10.1.3 | ColumncnAutoAttachPortMsgAuthStatus | read-create | current | Controls the current Auto-Attach message authentication status for the associated interface. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.4 | ColumncnAutoAttachPortMsgAuthKey | read-create | current | Provides access to the Auto-Attach message authentication key for the associated interface. Can be used to establish a new key of length 1..32 octets. Always r… |
| 1.3.6.1.4.1.17713.24.1.1.10.1.5 | ColumncnAutoAttachPortActivePolicyName | read-only | current | Name of the policy specification that is currently applied to the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.6 | ColumncnAutoAttachPortPolicyApplied | read-only | current | The number of times a policy has been applied to the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.7 | ColumncnAutoAttachPortPolicyExpired | read-only | current | The number of times a policy has expired on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.8 | ColumncnAutoAttachPortPolicyErrors | read-only | current | The number of times an error has been detected during policy application/expiration on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.9 | ColumncnAutoAttachPortRowStatus | read-create | current | This object allows entries to be created, deleted and modified in the cnAutoAttachPortTable, if the operation is supported by the agent. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.10 | ColumncnAutoAttachPortTlvTxEnable | read-create | current | This object supports enabling/disabling PBA/AA TLV transmission with LLDP. TLV transmission is enabled on the port when the associated bit is 1 and disabled wh… |
| 1.3.6.1.4.1.17713.24.1.1.10.1.11 | ColumncnAutoAttachPortDevSettingsTlvReceived | read-only | current | The number of times a PBA Device Settings TLV has been received by LLDP on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.12 | ColumncnAutoAttachPortDevSettingsTlvProcessed | read-only | current | The number of times a PBA Device Settings TLV has been processed by the PBA agent on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.13 | ColumncnAutoAttachPortDevSettingsTlvAuthFails | read-only | current | The number of times a PBA Device Settings TLV has been dropped because of an authentication failure on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.14 | ColumncnAutoAttachPortPrevPolicyName | read-only | current | Name of the policy specification that was previously applied to the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.15 | ColumncnAutoAttachPortAuthTlvReceived | read-only | current | The number of times a PBA Authentication TLV has been received by LLDP on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.16 | ColumncnAutoAttachPortAuthTlvProcessed | read-only | current | The number of times a PBA Authentication TLV has been processed by the PBA agent on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.17 | ColumncnAutoAttachPortAuthTlvChanged | read-only | current | The number of times a PBA Authentication TLV that is different than the previously processed Authentication TLV has been processed by the PBA agent on the port. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.18 | ColumncnAutoAttachPortAutoVlanServerDiscovery | read-create | current | Controls Auto-VLAN server discovery for the associated interface. |
| 1.3.6.1.4.1.17713.24.1.1.10.1.19 | ColumncnAutoAttachPortAutoVlanServerStatus | read-only | current | Exports the current Auto-VLAN server status for the associated interface. notDiscovered(1) - no server detected discovered(2) - server detected connected(3) - … |
| 1.3.6.1.4.1.17713.24.1.1.10.1.20 | ColumncnAutoAttachPortAutoVlanServerTrunkStatus | read-only | current | Exports the current Auto-VLAN server trunk status for the associated interface. Status is 'enabled' when the interface mode has been dynamically transitioned t… |
| 1.3.6.1.4.1.17713.24.1.1.10.1.21 | ColumncnAutoAttachPortRestrictedMacMatch | read-create | current | When enabled, additional checks are performed during evaluation of MAC address-based policies to ensure that they are only applied to the port if only a single… |
| 1.3.6.1.4.1.17713.24.1.1.11 | TablecnAutoAttachRuleTable | not-accessible | current | This table contains the rule specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.11.1 | RowcnAutoAttachRuleEntry | not-accessible | current | Information about the rule specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.11.1.1 | ColumncnAutoAttachRuleName | not-accessible | current | Name for the rule specification. |
| 1.3.6.1.4.1.17713.24.1.1.11.1.2 | ColumncnAutoAttachRuleType | read-create | current | Rule type identifier. The rule type determines how a device is identified using data associated with the device (e.g., using exported LLDP TLV data, device MAC… |
| 1.3.6.1.4.1.17713.24.1.1.11.1.3 | ColumncnAutoAttachRuleDeviceData | read-create | current | Specifies the data that is used to identify a device. Data application depends on the associated detection method (cnAutoAttachRuleType). |
| 1.3.6.1.4.1.17713.24.1.1.11.1.4 | ColumncnAutoAttachRuleRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachRuleTable. |
| 1.3.6.1.4.1.17713.24.1.1.11.1.5 | ColumncnAutoAttachRuleListName | read-create | current | The Rule List Name is used to link rules. Rules belonging to the same list (based on the rule list name attribute) are treated as a single rule during evaluati… |
| 1.3.6.1.4.1.17713.24.1.1.11.1.6 | ColumncnAutoAttachRuleDataFileName | read-create | current | File name that identifies downloaded data that can be used to specify rule criteria, if needed, as determined by the rule type. |
| 1.3.6.1.4.1.17713.24.1.1.12 | TablecnAutoAttachActionTable | not-accessible | current | This table contains the action specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.12.1 | RowcnAutoAttachActionEntry | not-accessible | current | Information about the action specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.1 | ColumncnAutoAttachActionName | not-accessible | current | Name for the action specification. Action is localized if the name includes a localization ('@localizationValue') suffix. The base action name is 1..32 charact… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.2 | ColumncnAutoAttachActionVlanData | read-create | deprecated | Specifies VLAN IDs to be associated with an interface. VLAN data is specified using a string containing comma-separated individual VLANs and VLAN ranges (e.g.,… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.3 | ColumncnAutoAttachActionPvid | read-create | current | Default/native VLAN ID for an interface. A value of 0 indicates an PVID update action is not requested. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.4 | ColumncnAutoAttachActionPortMode | read-create | current | Port mode for an interface. A value of 'none(1)' indicates that no update is requested. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.5 | ColumncnAutoAttachActionRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachActionTable. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.6 | ColumncnAutoAttachActionUserPriority | read-create | current | Default user priority value for an interface. A value of 8 indicates a user priority update action is not requested. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.7 | ColumncnAutoAttachActionQosTrust | read-create | current | QoS trust setting for an interface. A value of 'none(1)' indicates that no update is requested. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.8 | ColumncnAutoAttachActionUplinkData | read-create | current | Specifies interfaces to be considered for VLAN membership updates when VLAN membership updates are initiated through processing of the cnAutoAttachActionVlanDa… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.9 | ColumncnAutoAttachActionPoePriority | read-create | current | PoE priority setting for an interface. A value of 'none(1)' indicates that no update is requested. |
| 1.3.6.1.4.1.17713.24.1.1.12.1.10 | ColumncnAutoAttachActionPvidUpdateReset | read-create | current | PVID update modifier setting. When 'enabled(1)', if the port PVID is updated when a policy applied, the port will be bounced (shutdown/no shutdown). If 'disabl… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.11 | ColumncnAutoAttachActionProtectedPort | read-create | current | Protected port setting. When 'enabled(2)', the port will be made protected in terms of VLAN operation. If 'disabled(3)', the port will not operate as a protect… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.12 | ColumncnAutoAttachActionCambiumSync | read-create | current | Cambium Sync setting. When 'enabled(2)', the the Cambium Sync signal will be generated on the port. If 'disabled(3)', Cambium Sync will not be generated on the… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.13 | ColumncnAutoAttachActionPortSpeed | read-create | current | Port Speed setting. Supports enabling (the 'negotiated' options) or disabling (the 'forced' option) port speed auto-negotiation and sets the negotiated maximum… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.14 | ColumncnAutoAttachActionPortAdr | read-create | current | Port Automatic Device Recovery (ADR) setting. Supports enabling or disabling the ADR status for a port. If a device does not support this functionality, the va… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.15 | ColumncnAutoAttachActionAutoVoip | read-create | current | Automatic voice device processing (Auto-VoIP). Supports enabling or disabling automatic voice device processing. When 'enabled(1)', port settings are updated t… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.16 | ColumncnAutoAttachActionExtVlanData | read-create | current | Specifies VLAN IDs to be associated with an interface. VLAN data is specified using a string containing comma-separated individual VLANs and VLAN ranges (e.g.,… |
| 1.3.6.1.4.1.17713.24.1.1.12.1.17 | ColumncnAutoAttachActionStpPortfast | read-create | current | STP portfast setting. When 'enabled(2)', STP portfast processing will be enabled on the port. If 'disabled(3)', STP portfast processing will not be enabled on … |
| 1.3.6.1.4.1.17713.24.1.1.12.1.18 | ColumncnAutoAttachActionExcludeVlans | read-create | current | VLAN update modifier setting. When 'enabled(1)', current VLAN memberships will be cleared when a policy is applied. If 'disabled(2)', current VLAN memberships … |
| 1.3.6.1.4.1.17713.24.1.1.12.1.19 | ColumncnAutoAttachActionDhcpSnoopTrust | read-create | current | DHCP Snooping trust state setting. When 'untrusted(2)', the port's DHCP Snooping trust state will be set to untrusted. If 'trusted(3)', the port's DHCP Snoopin… |
| 1.3.6.1.4.1.17713.24.1.1.13 | TablecnAutoAttachPolicyTable | not-accessible | current | This table contains the policy specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.13.1 | RowcnAutoAttachPolicyEntry | not-accessible | current | Information about the policy specifications for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.1 | ColumncnAutoAttachPolicyName | not-accessible | current | Name for the policy specification. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.2 | ColumncnAutoAttachPolicyStatus | read-create | current | Status of the policy specification. A 'enabled(1)' policy can be applied to an interface based on device detection. A 'disabled(2)' policy will never be applie… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.3 | ColumncnAutoAttachPolicyPrecedence | read-create | current | Precedence to use for selecting a policy when multiple policies match a device. A policy with a lower precedence value is applied before a policy with a higher… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.4 | ColumncnAutoAttachPolicyRuleName | read-create | current | Name of the rule specification that is referenced by the policy. The rule must be defined to be referenced. Rule name and rule type/device data are mutually-ex… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.5 | ColumncnAutoAttachPolicyRuleType | read-create | current | Rule type identifier. The rule type determines how a device is identified using data associated with the device (e.g., using exported LLDP TLV data, device MAC… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.6 | ColumncnAutoAttachPolicyRuleDeviceData | read-create | current | Specifies the data that is used to identify a device. Data application depends on the associated detection method (cnAutoAttachPolicyRuleType). Rule name and r… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.7 | ColumncnAutoAttachPolicyActionName | read-create | current | Name of the action specification that is referenced by the policy. The action must be defined to be referenced. Action name and VLAN data/pvid/port mode are mu… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.8 | ColumncnAutoAttachPolicyActionVlanData | read-create | current | Specifies VLAN IDs to be associated with an interface. VLAN data is specified using a string containing comma-separated individual VLANs and VLAN ranges (e.g.,… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.9 | ColumncnAutoAttachPolicyActionPvid | read-create | current | Default/native VLAN ID for an interface. A value of 0 indicates an PVID update action is not requested. Action name and VLAN data/pvid/port mode are mutually-e… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.10 | ColumncnAutoAttachPolicyActionPortMode | read-create | current | Port mode for an interface. A value of 'none(1)' indicates that no update is requested. Action name and VLAN data/pvid/port mode are mutually-exclusive and can… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.11 | ColumncnAutoAttachPolicyApplied | read-only | current | The number of times this policy specification has been applied to an interface. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.12 | ColumncnAutoAttachPolicyExpired | read-only | current | The number of times this policy specification has expired on an interface. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.13 | ColumncnAutoAttachPolicyErrors | read-only | current | The number of times an error has occurred during application/expiration of this policy specification on an interface. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.14 | ColumncnAutoAttachPolicyRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachPolicyTable. |
| 1.3.6.1.4.1.17713.24.1.1.13.1.15 | ColumncnAutoAttachPolicyPortList | read-create | current | Specifies interfaces to be considered during policy match criteria evaluation. If interface data is specified, only interfaces that are identified by this attr… |
| 1.3.6.1.4.1.17713.24.1.1.13.1.16 | ColumncnAutoAttachPolicyTodName | read-create | current | Name of the Time-of-Day specification that is referenced by the policy. The ToD spec must be defined to be referenced. |
| 1.3.6.1.4.1.17713.24.1.1.14 | TablecnAutoAttachScriptTable | not-accessible | current | This table contains the script definitions for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.14.1 | RowcnAutoAttachScriptEntry | not-accessible | current | Information about the script definitions for the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.14.1.1 | ColumncnAutoAttachScriptName | not-accessible | current | Name for the script definition. |
| 1.3.6.1.4.1.17713.24.1.1.14.1.2 | ColumncnAutoAttachScriptActionVlanData | read-create | current | Specifies VLAN IDs to be associated with an interface. VLAN data is specified using a string containing comma-separated individual VLANs and VLAN ranges (e.g.,… |
| 1.3.6.1.4.1.17713.24.1.1.14.1.3 | ColumncnAutoAttachScriptActionPvid | read-create | current | Default/native VLAN ID for an interface. A value of 0 indicates a PVID update action is not requested. |
| 1.3.6.1.4.1.17713.24.1.1.14.1.4 | ColumncnAutoAttachScriptRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachScriptTable. |
| 1.3.6.1.4.1.17713.24.1.1.15 | TablecnAutoAttachCondensedNbrTable | not-accessible | current | This table contains port-specific condensed neighbor data used by the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.15.1 | RowcnAutoAttachCondensedNbrEntry | not-accessible | current | Port-specific condensed neighbor data used by the Auto-Attach application. Data is derived from LLDP and the MAC address table at the time the table data is qu… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.1 | ColumncnAutoAttachCondensedNbrIfIndex | not-accessible | current | Interface (ifIndex) identifier attribute. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.2 | ColumncnAutoAttachCondensedNbrName | read-only | current | Interface name used to identify the port for configuration and monitoring. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.3 | ColumncnAutoAttachCondensedNbrLldpChassisId | read-only | current | LLDP Chassis ID data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.4 | ColumncnAutoAttachCondensedNbrLldpPortId | read-only | current | LLDP Port ID data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.5 | ColumncnAutoAttachCondensedNbrLldpSystemName | read-only | current | LLDP System Name data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.6 | ColumncnAutoAttachCondensedNbrLldpSystemDesc | read-only | current | LLDP System Description data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.7 | ColumncnAutoAttachCondensedNbrLldpMgmtIpv4Addr | read-only | current | LLDP Mgmt IPv4 Address data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.8 | ColumncnAutoAttachCondensedNbrMacAddress | read-only | current | The MAC address associated with the device connected to the port. The MAC address is returned in xx:xx:xx:xx:xx:xx format. If a single MAC address is associate… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.9 | ColumncnAutoAttachCondensedNbrClassification | read-only | current | Presents the device's class memberships based on the currently defined neighbor class data (cnAutoAttachNbrClassTable) and the LLDP device System Description d… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.10 | ColumncnAutoAttachCondensedNbrIfHCInOctets | read-only | current | The total number of octets received on the interface since the neighbor was learned. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.11 | ColumncnAutoAttachCondensedNbrIfHCInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer, sin… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.12 | ColumncnAutoAttachCondensedNbrIfHCInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer, since the neighbor w… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.13 | ColumncnAutoAttachCondensedNbrIfHCInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer, since the neighbor w… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.14 | ColumncnAutoAttachCondensedNbrIfHCOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters, since the neighbor was learned. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.15 | ColumncnAutoAttachCondensedNbrIfHCOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.16 | ColumncnAutoAttachCondensedNbrIfHCOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.17713.24.1.1.15.1.17 | ColumncnAutoAttachCondensedNbrIfHCOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.17713.24.1.1.15.1.18 | ColumncnAutoAttachCondensedNbrTimeStamp | read-only | current | The value of sysUpTime when the current neighbor was added to this table. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.19 | ColumncnAutoAttachCondensedNbrIfInErrors | read-only | current | The total number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.20 | ColumncnAutoAttachCondensedNbrIfOutErrors | read-only | current | The total number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.21 | ColumncnAutoAttachCondensedNbrIfCRCAlignErrors | read-only | current | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had eit… |
| 1.3.6.1.4.1.17713.24.1.1.15.1.22 | ColumncnAutoAttachCondensedNbrIfLinkTransitions | read-only | current | The number of Link Up and Link Down transition events counted for the port. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.23 | ColumncnAutoAttachCondensedNbrIfUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.17713.24.1.1.15.1.24 | ColumncnAutoAttachCondensedNbrIfOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.17713.24.1.1.16 | ScalarcnAutoAttachGlobalUplinkData | read-write | current | Specifies interfaces to be considered for VLAN membership updates when VLAN membership updates are initiated by a policy being applied to a port. Uplink interf… |
| 1.3.6.1.4.1.17713.24.1.1.17 | ScalarcnAutoAttachAutoVlanStatus | read-write | current | When Auto-VLAN is enabled, dynamic PBA rules, actions and policies can be created and deleted based on received LLDP frames that contain PBA TLV data. When dis… |
| 1.3.6.1.4.1.17713.24.1.1.18 | TablecnAutoAttachNbrClassTable | not-accessible | current | This table contains neighbor classification data that is used to support filtering of the Condensed Neighbor Table data. |
| 1.3.6.1.4.1.17713.24.1.1.18.1 | RowcnAutoAttachNbrClassEntry | not-accessible | current | Associates a predefined neighbor class with a string that can be used to identify devices as class members based on processed LLDP data. |
| 1.3.6.1.4.1.17713.24.1.1.18.1.1 | ColumncnAutoAttachNbrClassType | not-accessible | current | Device class groups. |
| 1.3.6.1.4.1.17713.24.1.1.18.1.2 | ColumncnAutoAttachNbrClassIdentifier | not-accessible | current | Specifies the data used to identify a device as a member of class cnAutoAttachNbrClassType based on processed LLDP or MAC address data. |
| 1.3.6.1.4.1.17713.24.1.1.18.1.3 | ColumncnAutoAttachNbrClassIdentifierType | read-create | current | Specifies whether the class identifier data represents LLDP or MAC address data. |
| 1.3.6.1.4.1.17713.24.1.1.18.1.4 | ColumncnAutoAttachNbrClassStorageType | read-only | current | Storage type associated with the cnAutoAttachNbrClassTable entry. |
| 1.3.6.1.4.1.17713.24.1.1.18.1.5 | ColumncnAutoAttachNbrClassRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachNbrClassTable. |
| 1.3.6.1.4.1.17713.24.1.1.19 | ScalarcnAutoAttachDeviceLocalization | read-write | current | Specifies the device localization string. Localization is used by PBA to support device-specific interpretation of various PBA components (e.g., actions). A ze… |
| 1.3.6.1.4.1.17713.24.1.1.20 | TablecnAutoAttachMacListFileTable | not-accessible | current | This table contains MAC list file data for the PBA/Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.20.1 | RowcnAutoAttachMacListFileEntry | not-accessible | current | MAC list file data related to the PBA/Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.20.1.1 | ColumncnAutoAttachMacListFileName | not-accessible | current | Name of the MAC list file associated with this entry. |
| 1.3.6.1.4.1.17713.24.1.1.20.1.2 | ColumncnAutoAttachMacListFileMacCount | read-only | current | Count of MAC addresses in the file. |
| 1.3.6.1.4.1.17713.24.1.1.20.1.3 | ColumncnAutoAttachMacListFileStatus | read-only | current | MAC list file status indication. |
| 1.3.6.1.4.1.17713.24.1.1.20.1.4 | ColumncnAutoAttachMacListFileRefresh | read-create | current | MAC list file refresh status. Controls if a file download is initiated only when a new entry is created (disabled) or also when an existing entry is updated (e… |
| 1.3.6.1.4.1.17713.24.1.1.20.1.5 | ColumncnAutoAttachMacListFileRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachMacListFileTable. |
| 1.3.6.1.4.1.17713.24.1.1.21 | ScalarcnAutoAttachFileDownloadType | read-write | current | Specifies the type of PBA data file to be downloaded. |
| 1.3.6.1.4.1.17713.24.1.1.22 | ScalarcnAutoAttachFileDownloadPath | read-write | current | Specifies the path of the PBA data file to be downloaded to the switch. The target file name is appended to the download path for SFTP and SCP transfer modes. |
| 1.3.6.1.4.1.17713.24.1.1.23 | ScalarcnAutoAttachFileDownloadTransferMode | read-write | current | Specifies the transfer mechanism used to download a PBA data file to the switch. |
| 1.3.6.1.4.1.17713.24.1.1.24 | ScalarcnAutoAttachFileDownloadFromIpAddrType | read-write | current | Specifies the address type of the target device from which the PBA data file will be downloaded. Standard address types of IPv4, IPv6 unicast address and DNS a… |
| 1.3.6.1.4.1.17713.24.1.1.25 | ScalarcnAutoAttachFileDownloadFromIpvx | read-write | current | Address of device from which the PBA data file will be downloaded. Address format is dictated by the associated address type. |
| 1.3.6.1.4.1.17713.24.1.1.26 | ScalarcnAutoAttachFileDownloadUsername | read-write | current | Specifies the user name that is required for downloading a PBA data file using SFTP and SCP transfer modes. Ignored for transfer mode TFTP. |
| 1.3.6.1.4.1.17713.24.1.1.27 | ScalarcnAutoAttachFileDownloadPassword | read-write | current | Specifies the password that is required for downloading a PBA data file using SFTP and SCP transfer modes. Ignored for transfer mode TFTP. Always returns a zer… |
| 1.3.6.1.4.1.17713.24.1.1.28 | ScalarcnAutoAttachAutoVlanServerTrunk | read-write | current | When enabled, Auto-VLAN server discovery causes the interface's port mode to be updated to 'Trunk', if necessary. |
| 1.3.6.1.4.1.17713.24.1.1.29 | ScalarcnAutoAttachDynamicUplinkSupport | read-write | current | When enabled, ports connected to dynamically detected devices, whose connection is considered an 'uplink' for PBA dynamic policies (e.g., an Auto-VLAN server),… |
| 1.3.6.1.4.1.17713.24.1.1.30 | TablecnAutoAttachTodTable | not-accessible | current | This table contains the Time-of-Day (ToD) specifications for the PBA application. A ToD specification, when associated with a PBA policy, determines if the pol… |
| 1.3.6.1.4.1.17713.24.1.1.30.1 | RowcnAutoAttachTodEntry | not-accessible | current | Information about the ToD specifications for the PBA application. |
| 1.3.6.1.4.1.17713.24.1.1.30.1.1 | ColumncnAutoAttachTodName | not-accessible | current | Name for the ToD specification. |
| 1.3.6.1.4.1.17713.24.1.1.30.1.2 | ColumncnAutoAttachTodWeekDays | read-create | current | Specifies the days of the week that a ToD entry is potentially active. Used when relative (day- based) timing is required. A zero length string indicates that … |
| 1.3.6.1.4.1.17713.24.1.1.30.1.3 | ColumncnAutoAttachTodStartDate | read-create | current | Specifies the starting date that a ToD entry is potentially active. Used when absolute (date- based) timing is required. A zero length string indicates that re… |
| 1.3.6.1.4.1.17713.24.1.1.30.1.4 | ColumncnAutoAttachTodEndDate | read-create | current | Specifies the ending date that a ToD entry is potentially active. Used when absolute (date- based) timing is required. A zero length string indicates that rela… |
| 1.3.6.1.4.1.17713.24.1.1.30.1.5 | ColumncnAutoAttachTodStartTime | read-create | current | Specifies the starting time that a ToD entry is potentially active. Required for relative and absolute ToD specifications. Start time data is specified using a… |
| 1.3.6.1.4.1.17713.24.1.1.30.1.6 | ColumncnAutoAttachTodEndTime | read-create | current | Specifies the ending time that a ToD entry is potentially active. Required for relative and absolute ToD specifications. End time data is specified using a 24 … |
| 1.3.6.1.4.1.17713.24.1.1.30.1.7 | ColumncnAutoAttachTodGroupName | read-create | current | The group name is used to link ToD entries. ToD entries belonging to the same group (based on the ToD group name attribute) are treated as a single (cumulative… |
| 1.3.6.1.4.1.17713.24.1.1.30.1.8 | ColumncnAutoAttachTodRowStatus | read-create | current | This object allows entries to be created and deleted in the cnAutoAttachTodTable. |
| 1.3.6.1.4.1.17713.24.1.1.31 | TablecnAutoAttachCondensedNbrHistTable | not-accessible | current | This table contains port-specific condensed neighbor history data tracked by the Auto-Attach application. |
| 1.3.6.1.4.1.17713.24.1.1.31.1 | RowcnAutoAttachCondensedNbrHistEntry | not-accessible | current | Port-specific condensed neighbor history data tracked by the Auto-Attach application. Data is derived from LLDP and the MAC address table at the time the neigh… |
| 1.3.6.1.4.1.17713.24.1.1.31.1.1 | ColumncnAutoAttachCondensedNbrHistIfIndex | not-accessible | current | Interface (ifIndex) identifier attribute. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.2 | ColumncnAutoAttachCondensedNbrHistTimeStamp | not-accessible | current | The value of sysUpTime when the previous neighbor was added to the Auto-Attach Condensed Nbr table. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.3 | ColumncnAutoAttachCondensedNbrHistName | read-only | current | Interface name used to identify the port for configuration and monitoring. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.4 | ColumncnAutoAttachCondensedNbrHistLldpChassisId | read-only | current | LLDP Chassis ID data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.5 | ColumncnAutoAttachCondensedNbrHistLldpSystemName | read-only | current | LLDP System Name data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.6 | ColumncnAutoAttachCondensedNbrHistLldpSystemDesc | read-only | current | LLDP System Description data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.7 | ColumncnAutoAttachCondensedNbrHistLldpMgmtIpv4Addr | read-only | current | LLDP Mgmt IPv4 Address data associated with the device connected to the port. |
| 1.3.6.1.4.1.17713.24.1.1.31.1.8 | ColumncnAutoAttachCondensedNbrHistMacAddress | read-only | current | The MAC address associated with the device connected to the port. The MAC address is returned in xx:xx:xx:xx:xx:xx format. If a single MAC address is associate… |
| 1.3.6.1.4.1.17713.24.1.1.31.1.9 | ColumncnAutoAttachCondensedNbrHistTimeCleared | read-only | current | The value of sysUpTime when the previous neighbor was cleared from the Auto-Attach Condensed Nbr table. |
| 1.3.6.1.4.1.17713.24.1.2 | NodecnAutoAttachNotifyObjects | |||
| 1.3.6.1.4.1.17713.24.1.2.1 | ScalarcnAutoAttachRemoteElemSysDescr | accessible-for-notify | current | The string value used to identify the system description of the remote system distributed through LLDP. |
| 1.3.6.1.4.1.17713.24.1.2.2 | ScalarcnAutoAttachRemoteElemMgmtOid | accessible-for-notify | current | The OID value used to identify the type of hardware component or protocol entity associated with the management address advertised by the remote system agent d… |