CAMBIUM-NETWORKS-GPS-MIB
38 objects
This MIB module contains objects related to the WISP GPS support.
Imported Objects
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17713.24.5 | IdentitycnGpsMib | This MIB module contains objects related to the WISP GPS support. | ||
| 1.3.6.1.4.1.17713.24.5.0 | NodecnGpsObjects | |||
| 1.3.6.1.4.1.17713.24.5.0.1 | ScalarcnGpsInternalSourceAdminStatus | read-write | current | The current admin status of the internal GPS-sync source (i.e. antenna). |
| 1.3.6.1.4.1.17713.24.5.0.2 | ScalarcnGpsExternalSourceAdminStatus | read-write | current | The current admin status of the external GPS-sync source (i.e. uGPS port w/ cnPulse). |
| 1.3.6.1.4.1.17713.24.5.0.3 | TablecnGpsPortTable | not-accessible | current | A table of por-port entries containing control and status information related to GPS-sync |
| 1.3.6.1.4.1.17713.24.5.0.3.1 | RowcnGpsPortEntry | not-accessible | current | Per-port entry for control and status information related to GPS-sync |
| 1.3.6.1.4.1.17713.24.5.0.3.1.1 | ColumncnGpsPortIndex | not-accessible | current | This object uniquely defines the ethernet port index for GPS-sync capable ports |
| 1.3.6.1.4.1.17713.24.5.0.3.1.2 | ColumncnGpsPortOutputAdminStatus | read-write | current | This object uniquely defines the ethernet port admin status for GPS-sync capable ports |
| 1.3.6.1.4.1.17713.24.5.0.4 | ScalarcnGpsSignalStatus | read-only | current | The current status of the GPS 1pps signal (acquired from uGPS port and/or cnPulse). |
| 1.3.6.1.4.1.17713.24.5.0.5 | NotificationcnGpsTrapMsg | current | This notification is changed whenever a status change is detected for the GPS 1pps signal. | |
| 1.3.6.1.4.1.17713.24.5.0.6 | ScalarcnGpsSourcePowerCycle | read-write | current | This object is used for power-cycling the internal or the external GPS source. The value of this object reflects the last source which was power-cycled. |
| 1.3.6.1.4.1.17713.24.5.0.7 | ScalarcnGpsInternalTime | read-only | current | This object reads the current time determined by the internal GPS |
| 1.3.6.1.4.1.17713.24.5.0.8 | ScalarcnGpsExternalTime | read-only | current | This object reads the current time determined by the external GPS |
| 1.3.6.1.4.1.17713.24.5.0.9 | ScalarcnGpsInternalLatitude | read-only | current | This object reads the latitude determined by the internal GPS |
| 1.3.6.1.4.1.17713.24.5.0.10 | ScalarcnGpsExternalLatitude | read-only | current | This object reads the latitude determined by the external GPS |
| 1.3.6.1.4.1.17713.24.5.0.11 | ScalarcnGpsInternalLongitude | read-only | current | This object reads the longitude determined by the internal GPS |
| 1.3.6.1.4.1.17713.24.5.0.12 | ScalarcnGpsExternalLongitude | read-only | current | This object reads the longitude determined by the external GPS |
| 1.3.6.1.4.1.17713.24.5.0.13 | ScalarcnGpsInternalSignalQuality | read-only | current | This object reads the signal quality determined by the internal GPS |
| 1.3.6.1.4.1.17713.24.5.0.14 | ScalarcnGpsExternalSignalQuality | read-only | current | This object reads the signal quality determined by the external GPS |
| 1.3.6.1.4.1.17713.24.5.0.15 | ScalarcnGpsInternalAntennaAltitude | read-only | current | This object reads the internal GPS antenna altitude. It also contains the unit of measurement |
| 1.3.6.1.4.1.17713.24.5.0.16 | ScalarcnGpsExternalAntennaAltitude | read-only | current | This object reads the external GPS antenna altitude. It also contains the unit of measurement |
| 1.3.6.1.4.1.17713.24.5.0.17 | ScalarcnGpsInternalAntennaBaseAltitude | read-only | current | This object reads the internal GPS antenna base altitude. It also contains the unit of measurement |
| 1.3.6.1.4.1.17713.24.5.0.18 | ScalarcnGpsExternalAntennaBaseAltitude | read-only | current | This object reads the external GPS antenna base altitude. It also contains the unit of measurement |
| 1.3.6.1.4.1.17713.24.5.0.19 | ScalarcnGpsInternalSelectionMode | read-only | current | This object reads the internal GPS selection mode |
| 1.3.6.1.4.1.17713.24.5.0.20 | ScalarcnGpsExternalSelectionMode | read-only | current | This object reads the external GPS selection mode |
| 1.3.6.1.4.1.17713.24.5.0.21 | ScalarcnGpsInternalLocalizationType | read-only | current | This object reads the internal GPS localization type (2D, 3D) |
| 1.3.6.1.4.1.17713.24.5.0.22 | ScalarcnGpsExternalLocalizationType | read-only | current | This object reads the external GPS localization type (2D, 3D) |
| 1.3.6.1.4.1.17713.24.5.0.23 | ScalarcnGpsInternalPdop | read-only | current | This object reads the internal GPS position dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.24 | ScalarcnGpsExternalPdop | read-only | current | This object reads the external GPS position dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.25 | ScalarcnGpsInternalHdop | read-only | current | This object reads the internal GPS horizontal dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.26 | ScalarcnGpsExternalHdop | read-only | current | This object reads the external GPS horizontal dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.27 | ScalarcnGpsInternalVdop | read-only | current | This object reads the internal GPS vertical dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.28 | ScalarcnGpsExternalVdop | read-only | current | This object reads the external GPS vertical dilution of precision |
| 1.3.6.1.4.1.17713.24.5.0.29 | ScalarcnGpsInternalSv | read-only | current | This object reads the internal GPS number of satelites in view |
| 1.3.6.1.4.1.17713.24.5.0.30 | ScalarcnGpsExternalSv | read-only | current | This object reads the external GPS number of satelites in view |
| 1.3.6.1.4.1.17713.24.5.0.31 | ScalarcnGpsInternalSu | read-only | current | This object reads the internal GPS number of satelites in use |
| 1.3.6.1.4.1.17713.24.5.0.32 | ScalarcnGpsExternalSu | read-only | current | This object reads the external GPS number of satelites in use |
| 1.3.6.1.4.1.17713.24.5.0.33 | ScalarcnGpsExternalSourcePower | read-write | current | This object is used for power-on/power-off the external GPS source. |