CAMBIUM-NETWORKS-SYSTEM-MIB
44 objects
This module contains MIB definitions for common cnMatrix system functions.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17713.24.4 | IdentitycnSystem | This module contains MIB definitions for common cnMatrix system functions. | ||
| 1.3.6.1.4.1.17713.24.4.1 | ScalarcambiumScheduledReload | read-write | current | Schedules a reload if the relative time or absolute time object is set |
| 1.3.6.1.4.1.17713.24.4.2 | ScalarcambiumReloadRelativeTime | read-write | current | Specifies the amount of time in seconds until the device will reboot. The reboot time is relative to the moment when cambiumScheduledReload is set to true. In … |
| 1.3.6.1.4.1.17713.24.4.3 | ScalarcambiumReloadAbsoluteTime | read-write | current | Specifies the time and date when the device will reboot. The device will not reboot unless cambiumScheduledReload is set to true. In order to set the absolute … |
| 1.3.6.1.4.1.17713.24.4.4 | ScalarcambiumReloadReason | read-write | current | Specifies the reason for the next reboot |
| 1.3.6.1.4.1.17713.24.4.5 | ScalarcambiumLastReloadReason | read-only | current | Displays the reason of the last reboot |
| 1.3.6.1.4.1.17713.24.4.6 | ScalarcambiumStpMode | read-write | current | Specifies the Spanning tree mode |
| 1.3.6.1.4.1.17713.24.4.7 | ScalarcambiumXMSInterfaceIP | read-only | current | Specifies the IP address of the interface used to connect to the XMS cloud |
| 1.3.6.1.4.1.17713.24.4.8 | ScalarcambiumXMSInterfaceMask | read-only | current | Specifies the IP address mask of the interface used to connect to the XMS cloud |
| 1.3.6.1.4.1.17713.24.4.9 | ScalarcambiumXMSInterfaceVLANId | read-only | current | Specifies the VLAN id of the interface used to connect to the XMS cloud |
| 1.3.6.1.4.1.17713.24.4.10 | ScalarcambiumSystemClock | read-write | current | Displays and sets the time and date. |
| 1.3.6.1.4.1.17713.24.4.11 | ScalarcambiumSystemTimezoneName | read-write | current | Displays and sets the timezone designation. |
| 1.3.6.1.4.1.17713.24.4.12 | ScalarcambiumSystemTimezoneOffset | read-write | current | Displays and sets the timezone offset from UTC in minutes. |
| 1.3.6.1.4.1.17713.24.4.13 | ScalarcambiumSystemSummerTimeName | read-write | current | Displays and sets the summer-time designation. |
| 1.3.6.1.4.1.17713.24.4.14 | ScalarcambiumSystemSummerTimeOffset | read-write | current | Displays and sets the summer-time (also known as Daylight Saving Time) offset from local time in minutes. |
| 1.3.6.1.4.1.17713.24.4.15 | ScalarcambiumSystemSummerTimeStart | read-write | current | Displays and sets the time and date when the one-shot summer-time (also known as Daylight Saving Time) will start having effect. |
| 1.3.6.1.4.1.17713.24.4.16 | ScalarcambiumSystemSummerTimeEnd | read-write | current | Displays and sets the time and date when the one-shot summer-time (also known as Daylight Saving Time) will stop having effect. |
| 1.3.6.1.4.1.17713.24.4.17 | ScalarcambiumSystemRecurringSummerTimeStart | read-write | current | Displays and sets the time of the year when the recurring summer-time (also known as Daylight Saving Time) will start having effect. The expected format is M.n… |
| 1.3.6.1.4.1.17713.24.4.18 | ScalarcambiumSystemRecurringSummerTimeEnd | read-write | current | Displays and sets the time of the year when the recurring summer-time (also known as Daylight Saving Time) will stop having effect. The expected format is M.n.… |
| 1.3.6.1.4.1.17713.24.4.19 | ScalarcambiumSystemSummerTimeMode | read-write | current | Specifies if summer-time (also known as Daylight Saving Time) will take effect and wether it will take effect only once, starting and ending at the configured … |
| 1.3.6.1.4.1.17713.24.4.20 | ScalarcambiumReloadDefault | read-write | current | Boots the switch and configures the factory default settings |
| 1.3.6.1.4.1.17713.24.4.21 | ScalarcambiumReloadPartialDefault | read-write | current | Boots the switch and configures the partial default settings |
| 1.3.6.1.4.1.17713.24.4.22 | ScalarcambiumSystemResetButton | read-write | current | Displays and sets the functionality of the physical reset button. |
| 1.3.6.1.4.1.17713.24.4.23 | ScalarcambiumMstpReset | read-write | current | Action object that resets mstp when it comes set. Only use with cloud(CnMaestro or XMS) |
| 1.3.6.1.4.1.17713.24.4.24 | NodecnHttpClient | |||
| 1.3.6.1.4.1.17713.24.4.24.1 | ScalarcnHttpClientProxyAddress | read-write | current | The value of the internetwork layer address used for HTTP proxy. The value of cnHttpClientProxyAddressType specifies how this address is to be interpreted. |
| 1.3.6.1.4.1.17713.24.4.24.2 | ScalarcnHttpClientProxyAddressType | read-write | current | The type of the internetwork layer address used for HTTP proxy. Thi object indicates how the value of cnHttpClientProxyAddress is to be interpreted. |
| 1.3.6.1.4.1.17713.24.4.24.3 | ScalarcnHttpClientProxyPort | read-write | current | Destination TCP port for the HTTP proxy. |
| 1.3.6.1.4.1.17713.24.4.24.4 | ScalarcnHttpClientUsername | read-write | current | The username that the HTTP client will use to authenticate |
| 1.3.6.1.4.1.17713.24.4.24.5 | ScalarcnHttpClientPassword | read-write | current | The password that the HTTP client will use to authenticate |
| 1.3.6.1.4.1.17713.24.4.24.6 | ScalarcnHttpClientPasswordType | read-write | current | This is used to indicate how the client password must be interpreted. |
| 1.3.6.1.4.1.17713.24.4.25 | ScalarcambiumSystemLoginBanner | read-write | current | Displayed before login |
| 1.3.6.1.4.1.17713.24.4.26 | ScalarcambiumSystemMotdBanner | read-write | current | Displayed after login |
| 1.3.6.1.4.1.17713.24.4.27 | NodecnCpuRateLimits | |||
| 1.3.6.1.4.1.17713.24.4.27.1 | ScalarcnArpBroadCastRateLimit | read-write | current | Rate-limit for ARP request messages going into the CPU. |
| 1.3.6.1.4.1.17713.24.4.28 | ScalarcambiumPasswordEncryption | read-write | current | If true, all passwords in the configuration will be encrypted. |
| 1.3.6.1.4.1.17713.24.4.29 | NodecnException | |||
| 1.3.6.1.4.1.17713.24.4.29.1 | ScalarcnExceptionDumpUrl | read-write | current | If not empty, core dumps will be sent to this URL. Supported format is usb:[destinationDir/] |
| 1.3.6.1.4.1.17713.24.4.30 | TablecambiumInternalPowerSupplyTable | not-accessible | current | Internal power supply entry |
| 1.3.6.1.4.1.17713.24.4.30.1 | RowcnInternalPowerSupplyTableEntry | not-accessible | current | Internal power supply entry |
| 1.3.6.1.4.1.17713.24.4.30.1.1 | ColumncnInternalPowerSupplyIndex | read-only | current | Internal power supply index identifier attribute |
| 1.3.6.1.4.1.17713.24.4.30.1.2 | ColumncnInternalPowerSupplyStatus | read-only | current | Internal power supply status |
| 1.3.6.1.4.1.17713.24.4.31 | ScalarcambiumSystemMotdBanner2 | read-write | current | Displayed after login. The contents of this object are concatenated with the cambiumSystemMotdBanner contents for display purposes. |
| 1.3.6.1.4.1.17713.24.4.32 | ScalarcambiumSystemMotdBanner3 | read-write | current | Displayed after login. The contents of this object are concatenated with the cambiumSystemMotdBanner contents and the cambiumSystemMotdBanner2 contents for dis… |