CANOPY-SYS-MIB
50 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| SNMPv2-SMI | NOTIFICATION-TYPE |
| SNMPv2-TC | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.2.1 | ScalartargetRange | read-only | mandatory | Initial target range used in installation +/-1, expressed in tenths of a kilometer. When Auto-Ranging this must be set to 0 |
| 1.3.6.1.2.2 | ScalarrangingMode | read-only | mandatory | Type of ranging to use during installation, either Auto-Ranging or use a selectable Target Range |
| 1.3.6.1.4.1.17713 | Nodemotorola | |||
| 1.3.6.1.4.1.17713.1 | Nodep2p | |||
| 1.3.6.1.4.1.17713.1.5 | Nodeconfiguration | |||
| 1.3.6.1.4.1.17713.1.5.1 | ScalariPAddress | read-only | mandatory | Internet protocol (IP) address. This address is used by the family of Internet protocols to uniquely this identify the unit on a network |
| 1.3.6.1.4.1.17713.1.5.2 | ScalarsubnetMask | read-only | mandatory | A subnet allows the flow of network traffic between hosts to be segregated based on a network configuration. By organizing hosts into logical groups, subnettin… |
| 1.3.6.1.4.1.17713.1.5.3 | ScalargatewayIPAddress | read-only | mandatory | The IP address of a computer on the current network that is currently acting as a network gateway. A gateway acts as an entrance / exit to packets from / to ot… |
| 1.3.6.1.4.1.17713.1.5.4 | ScalartargetMACAddress | read-only | mandatory | MAC address of the PTP wireless unit forming the other end of the PTP link |
| 1.3.6.1.4.1.17713.1.5.5 | ScalarmasterSlaveMode | read-only | mandatory | The PTP wireless link operates using a master and slave relationship. |
| 1.3.6.1.4.1.17713.1.5.6 | ScalarmaximumTransmitPower | read-only | mandatory | Maximum transmit power the wireless unit is permitted to use when establishing and maintaining the wireless link |
| 1.3.6.1.4.1.17713.1.8 | Nodelicence | |||
| 1.3.6.1.4.1.17713.1.8.1 | ScalarregionCode | read-only | mandatory | The region code prohibits the wireless unit from operating outside the regulated limits |
| 1.3.6.1.4.1.17713.1.8.2 | ScalarproductVariant | read-only | mandatory | The product variant |
| 1.3.6.1.4.1.17713.1.8.3 | ScalarproductName | read-only | mandatory | Name of the product variant |
| 1.3.6.1.4.1.17713.1.8.4 | ScalarethernetFibreSupport | read-only | mandatory | null |
| 1.3.6.1.4.1.17713.1.8.5 | ScalarfrequencyVariant | read-only | mandatory | Frequency variant of the wireless unit |
| 1.3.6.1.4.1.17713.1.10 | NodephyControl | |||
| 1.3.6.1.4.1.17713.1.10.1 | ScalarasymmetricTDD | read-only | mandatory | Control TDD Structure |
| 1.3.6.1.4.1.17713.1.12 | NodephyStatus | |||
| 1.3.6.1.4.1.17713.1.12.1 | ScalarreceivePower | read-only | mandatory | Receive power expressed in tenths of a dBm |
| 1.3.6.1.4.1.17713.1.12.2 | ScalarvectorError | read-only | mandatory | The vector error measurement compares the received signal's IQ modulation characteristics to an ideal signal to determine the composite error vector magnitude.… |
| 1.3.6.1.4.1.17713.1.12.3 | ScalartransmitPower | read-only | mandatory | Transmit power expressed in tenths of a dBm |
| 1.3.6.1.4.1.17713.1.12.4 | Scalarrange | read-only | mandatory | Distance between the two peer wireless units expressed in tenths of a kilometer |
| 1.3.6.1.4.1.17713.1.12.5 | ScalarlinkLoss | read-only | mandatory | The wireless link loss expressed in tenths of a dB |
| 1.3.6.1.4.1.17713.1.12.6 | ScalarreceiveChannel | read-only | mandatory | Current active receive channel |
| 1.3.6.1.4.1.17713.1.12.7 | ScalartransmitChannel | read-only | mandatory | Current active transmit channel |
| 1.3.6.1.4.1.17713.1.12.8 | ScalarreceiveModulationMode | read-only | mandatory | Current active receive modulation mode |
| 1.3.6.1.4.1.17713.1.12.9 | ScalartransmitModulationMode | read-only | mandatory | Current active transmit modulation mode |
| 1.3.6.1.4.1.17713.1.12.11 | ScalarreceiveFreq | read-only | mandatory | Current receive frequency expressed in MHz |
| 1.3.6.1.4.1.17713.1.12.12 | ScalartransmitFreq | read-only | mandatory | Current transmit frequency expressed in MHz |
| 1.3.6.1.4.1.17713.1.12.13 | ScalarsignalStrengthRatio | read-only | mandatory | Signal strength ratio (Vertical / Horizontal) expressed in tenths of a dB |
| 1.3.6.1.4.1.17713.1.18 | Nodereset | |||
| 1.3.6.1.4.1.17713.1.18.1 | ScalarsystemReset | read-write | mandatory | Setting this attribute to '1' will cause a system reboot |
| 1.3.6.1.4.1.17713.1.19 | Nodeversions | |||
| 1.3.6.1.4.1.17713.1.19.1 | ScalarsoftwareVersion | read-only | mandatory | Current software version |
| 1.3.6.1.4.1.17713.1.19.2 | ScalarhardwareVersion | read-only | mandatory | Hardware platform version. |
| 1.3.6.1.4.1.17713.1.19.3 | ScalarsecondarySoftwareVersion | read-only | mandatory | Secondary software version, used when the primary software image is invalid or erased |
| 1.3.6.1.4.1.17713.1.19.4 | ScalarbootVersion | read-only | mandatory | Boot code sofwtare version |
| 1.3.6.1.4.1.17713.1.20 | NodepubStats | |||
| 1.3.6.1.4.1.17713.1.20.1 | ScalarreceiveDataRate | read-only | mandatory | Average data rate over the last one second interval expressed in kbps |
| 1.3.6.1.4.1.17713.1.20.2 | ScalartransmitDataRate | read-only | mandatory | Average data rate over the last one second interval expressed in kbps |
| 1.3.6.1.4.1.17713.1.20.3 | ScalaraggregateDataRate | read-only | mandatory | Average data rate over the last one second interval (kbps). |
| 1.3.6.1.4.1.17713.1.22 | Nodeencryption | |||
| 1.3.6.1.4.1.17713.1.22.1 | ScalarencryptionAlgorithm | read-only | mandatory | The Encryption Algorithm used by the wireless link.nnYou should be aware that enabling encryption results in a reduction in available data bandwidthnnN.B. The … |
| 1.3.6.1.4.1.17713.1.99 | Nodep2pTraps | |||
| 1.3.6.1.4.1.17713.1.99.1 | NotificationdfsChannelChangeTrap | current | DFS channel change event | |
| 1.3.6.1.4.1.17713.1.99.2 | NotificationdfsImpulsiveInterferenceDetectedTrap | current | DFS impulsive interference detected event | |
| 1.3.6.1.4.1.17713.2 | Nodep2mp |