CAPWAP-DOT11-MIB
22 objects
Copyright (c) 2010 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info). This version of this MIB module is part of RFC 5834; see the RFC itself for full legal notices. This MIB module contains managed object definitions for CAPWAP Protocol binding for IEEE 802.11.
Imported Objects
| CAPWAP-BASE-MIB | CapwapBaseMacTypeTC CapwapBaseTunnelModeTC |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.195 | IdentitycapwapDot11MIB | Copyright (c) 2010 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with o… | ||
| 1.3.6.1.2.1.195.1 | NodecapwapDot11Objects | |||
| 1.3.6.1.2.1.195.1.1 | TablecapwapDot11WlanTable | not-accessible | current | A table that allows the operator to display and configure WLAN profiles, such as specifying the MAC type and tunnel mode for a WLAN. Also, it helps the AC to c… |
| 1.3.6.1.2.1.195.1.1.1 | RowcapwapDot11WlanEntry | not-accessible | current | A set of objects that stores the settings of a WLAN profile. |
| 1.3.6.1.2.1.195.1.1.1.1 | ColumncapwapDot11WlanProfileId | not-accessible | current | Represents the identifier of a WLAN profile that has a corresponding capwapDot11WlanProfileIfIndex. |
| 1.3.6.1.2.1.195.1.1.1.2 | ColumncapwapDot11WlanProfileIfIndex | read-only | current | Represents the index value that uniquely identifies a WLAN Profile Interface. The interface identified by a particular value of this index is the same interfac… |
| 1.3.6.1.2.1.195.1.1.1.3 | ColumncapwapDot11WlanMacType | read-create | current | Represents whether the WTP SHOULD support the WLAN in Local or Split MAC modes. |
| 1.3.6.1.2.1.195.1.1.1.4 | ColumncapwapDot11WlanTunnelMode | read-create | current | Represents the frame tunneling mode to be used for IEEE 802.11 data frames from all stations associated with the WLAN. Bits are exclusive with each other for a… |
| 1.3.6.1.2.1.195.1.1.1.5 | ColumncapwapDot11WlanRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All the objects in a row can be modified only when the value of this object in the … |
| 1.3.6.1.2.1.195.1.2 | TablecapwapDot11WlanBindTable | not-accessible | current | A table that stores bindings between WLAN profiles (identified by capwapDot11WlanProfileId) and WTP Virtual Radio Interfaces. The WTP Virtual Radio Interfaces … |
| 1.3.6.1.2.1.195.1.2.1 | RowcapwapDot11WlanBindEntry | not-accessible | current | A set of objects that stores the binding of a WLAN profile to a WTP Virtual Radio Interface. It also stores the mapping between WLAN ID and WLAN BSS Interface.… |
| 1.3.6.1.2.1.195.1.2.1.1 | ColumncapwapDot11WlanBindWlanId | read-only | current | Represents the WLAN ID of a WLAN. During a binding operation, the AC MUST select an unused WLAN ID from between 1 and 16 [RFC5416]. For example, to bind anothe… |
| 1.3.6.1.2.1.195.1.2.1.2 | ColumncapwapDot11WlanBindBssIfIndex | read-only | current | Represents the index value that uniquely identifies a WLAN BSS Interface. The interface identified by a particular value of this index is the same interface as… |
| 1.3.6.1.2.1.195.1.2.1.3 | ColumncapwapDot11WlanBindRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. All the objects in a row can be modified only when the value of this object in the … |
| 1.3.6.1.2.1.195.2 | NodecapwapDot11Conformance | |||
| 1.3.6.1.2.1.195.2.1 | NodecapwapDot11Groups | |||
| 1.3.6.1.2.1.195.2.1.1 | GroupcapwapDot11WlanGroup | current | A collection of objects that is used to configure the properties of a WLAN profile. | |
| 1.3.6.1.2.1.195.2.1.2 | GroupcapwapDot11WlanBindGroup | current | A collection of objects that is used to bind the WLAN profiles with a radio. | |
| 1.3.6.1.2.1.195.2.2 | NodecapwapDot11Compliances | |||
| 1.3.6.1.2.1.195.2.2.1 | CompliancecapwapDot11Compliance | current | Describes the requirements for conformance to the CAPWAP-DOT11-MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CapwapDot11WlanIdProfileTC | Unsigned32 (1..512) | current | Represents the unique identifier of a WLAN profile. |
| CapwapDot11WlanIdTC | Unsigned32 (1..16) | current | Represents the unique identifier of a Wireless Local Area Network (WLAN). |