CASA-CABLE-CMQUERY-MIB
19 objects
This is the enterprise MIB Module for CASA systems CMTS.
Imported Objects
| CASA-MIB | casa |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20858.10 | NodecasaMgmt | |||
| 1.3.6.1.4.1.20858.10.18 | IdentitycasaCmQueryMib | This is the enterprise MIB Module for CASA systems CMTS. | ||
| 1.3.6.1.4.1.20858.10.18.1 | NodecasaCmQueryMibObjects | |||
| 1.3.6.1.4.1.20858.10.18.1.1 | TablecasaCmQueryTable | not-accessible | current | describes the PHY signal quality and Tx/Rx parameter of cable modem. |
| 1.3.6.1.4.1.20858.10.18.1.1.1 | RowcasaCmQueryEntry | not-accessible | current | describes the PHY signal quality and Tx/Rx parameter of cable modem,index of this table is casaQueryCmMacAddress. |
| 1.3.6.1.4.1.20858.10.18.1.1.1.1 | ColumncasaQueryCmMacAddress | not-accessible | current | The cable modem Mac Address. |
| 1.3.6.1.4.1.20858.10.18.1.1.1.2 | ColumncasaQueryCmIpAddress | read-only | current | The cable modem Ip Address. |
| 1.3.6.1.4.1.20858.10.18.1.1.1.3 | ColumncasaQueryCmTxTimeOffset | read-only | current | A measure of the current round trip time at the CM, or the maximum round trip time seen by the CMTS. Used for timing of CM upstream transmissions to ensure syn… |
| 1.3.6.1.4.1.20858.10.18.1.1.1.4 | ColumncasaQueryCmMicroReflection | read-only | current | Total microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to retu… |
| 1.3.6.1.4.1.20858.10.18.1.1.1.5 | ColumncasaQueryCmStatusTxPower | read-only | current | The operational transmit power of the cable modem downstream channel,the most current value (CM) or the value of 0. |
| 1.3.6.1.4.1.20858.10.18.1.1.1.6 | ColumncasaQueryCmStatusRxPower | read-only | current | The operational receive power of the cable modem upstream channel,the most current value (CM) or the value of 0 |
| 1.3.6.1.4.1.20858.10.18.1.1.1.7 | ColumncasaQueryCmSigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for this channel. describes the Signal/Noise of the upstream channel of CM . |
| 1.3.6.1.4.1.20858.10.18.1.1.1.8 | ColumncasaQueryCmtsSigQSignalNoise | read-only | current | Signal/Noise ratio as perceived for this channel. describes the average Signal/Noiseof the upstream channel of CMTS. |
| 1.3.6.1.4.1.20858.10.18.2 | NodecasaCmQueryGroups | |||
| 1.3.6.1.4.1.20858.10.18.2.1 | GroupcasaCmQueryroup | current | Box is required to support objects in this group | |
| 1.3.6.1.4.1.20858.10.18.3 | NodecasaCmQueryCompliances | |||
| 1.3.6.1.4.1.20858.10.18.3.1 | CompliancecasaCmQueryCompliance | current | Description. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TenthdB | Integer32 | current | This data type represents power levels that are normally expressed in dB. Units are in tenths of a dB; for example, 5.1 dB will be represented as 51. |
| TenthdBmV | Integer32 | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, 5.1 dBmV will be represented as 51. |