CENTRECOM-MIB
93 objects
Atkk Switch System objects
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | sysDescr sysUpTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207 | Nodeati | |||
| 1.3.6.1.4.1.207.1 | Nodeproducts | |||
| 1.3.6.1.4.1.207.1.4 | NodecentreCom | |||
| 1.3.6.1.4.1.207.1.4.16 | Nodecentrecom8500sx | |||
| 1.3.6.1.4.1.207.1.4.17 | Nodecentrecom8500lx | |||
| 1.3.6.1.4.1.207.1.4.18 | Nodecentrecom9100sx | |||
| 1.3.6.1.4.1.207.1.4.19 | Nodecentrecom9100lx | |||
| 1.3.6.1.4.1.207.8 | NodemibObjects | |||
| 1.3.6.1.4.1.207.8.12 | NodeatkkSwitchMIB | |||
| 1.3.6.1.4.1.207.8.12.2 | NodeextSwitchMIB | |||
| 1.3.6.1.4.1.207.8.12.2.3 | IdentityatiSwitchSystem | Atkk Switch System objects | ||
| 1.3.6.1.4.1.207.8.12.2.3.3 | ScalaratiSaveConfiguration | write-only | mandatory | When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value… |
| 1.3.6.1.4.1.207.8.12.2.3.4 | ScalaratiSaveStatus | read-only | mandatory | This object will return the status of a save operation invoked by setting the atiSaveConfiguration object. A network management application can read this objec… |
| 1.3.6.1.4.1.207.8.12.2.3.5 | ScalaratiCurrentConfigInUse | read-only | mandatory | Shows which NVRAM configuration store was used at last boot |
| 1.3.6.1.4.1.207.8.12.2.3.6 | ScalaratiConfigToUseOnReboot | read-write | mandatory | Controls which NVRAM configuration store will be used on next reboot. |
| 1.3.6.1.4.1.207.8.12.2.3.7 | ScalaratiOverTemperatureAlarm | read-only | mandatory | Alarm status of overtemperature sensor in device enclosure. |
| 1.3.6.1.4.1.207.8.12.2.3.8 | ScalaratiCurrentTemperature | read-only | mandatory | Current temperature in degrees celcius measured inside device enclosure. |
| 1.3.6.1.4.1.207.8.12.2.3.9 | TableatiFanStatusTable | not-accessible | mandatory | Table of operational status of all internal cooling fans. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1 | RowatiFanStatusEntry | not-accessible | mandatory | Entry in table of all internal cooling fans. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1.1 | ColumnatiFanNumber | read-only | mandatory | Identifier of cooling fan, numbered from the front and/or left side of device. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1.2 | ColumnatiFanOperational | read-only | mandatory | Operational status of a cooling fan. |
| 1.3.6.1.4.1.207.8.12.2.3.10 | ScalaratiPrimaryPowerOperational | read-only | mandatory | Operational status of internal power supply of a device. |
| 1.3.6.1.4.1.207.8.12.2.3.11 | ScalaratiRedundantPowerStatus | read-only | mandatory | Operational status of an external redundant power supply to a device. |
| 1.3.6.1.4.1.207.8.12.2.3.12 | ScalaratiRedundantPowerAlarm | read-only | mandatory | Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. |
| 1.3.6.1.4.1.207.8.12.2.3.13 | ScalaratiPrimarySoftwareRev | read-only | mandatory | The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This … |
| 1.3.6.1.4.1.207.8.12.2.3.14 | ScalaratiSecondarySoftwareRev | read-only | mandatory | The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. Thi… |
| 1.3.6.1.4.1.207.8.12.2.3.15 | ScalaratiImageToUseOnReboot | read-write | mandatory | Controls which image will be used on next reboot. |
| 1.3.6.1.4.1.207.8.12.2.3.16 | ScalaratiSystemID | read-only | mandatory | This represents the System ID of the Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.17 | ScalaratiSystemBoardID | read-only | mandatory | This represents the Board ID of the Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.18 | ScalaratiSystemLeftBoardID | read-only | mandatory | This represents the Left Board ID of the Summit Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.19 | ScalaratiSystemRightBoardID | read-only | mandatory | This represents the Right Board ID of the Summit Switch. |
| 1.3.6.1.4.1.207.8.12.2.4 | IdentityatiVlan | Atkk Virtual LAN objects | ||
| 1.3.6.1.4.1.207.8.12.2.4.1 | NodeatiVlanGroup | |||
| 1.3.6.1.4.1.207.8.12.2.4.1.2 | TableatiVlanIfTable | not-accessible | mandatory | This table lists VLAN interfaces that exist within a device. A single entry exists in this list for each VLAN interface in the system. A VLAN interface may be … |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1 | RowatiVlanIfEntry | not-accessible | mandatory | An individual VLAN interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the atiNextAvailableVirtIfInde… |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1.1 | ColumnatiVlanIfIndex | read-write | mandatory | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the atiNextAvailableVirtIfIndex obje… |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1.2 | ColumnatiVlanIfDescr | read-write | mandatory | This is a description of the VLAN interface. |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1.3 | ColumnatiVlanIfType | read-write | mandatory | The VLAN interface type. |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1.4 | ColumnatiVlanIfGlobalIdentifier | read-write | mandatory | An administratively assigned global VLAN identifier. The binding between a global identifier and a VLAN interface can be created or removed. To create a bindin… |
| 1.3.6.1.4.1.207.8.12.2.4.1.2.1.6 | ColumnatiVlanIfStatus | read-write | mandatory | The status column for this VLAN interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: ac… |
| 1.3.6.1.4.1.207.8.12.2.4.2 | NodeatiVirtualGroup | |||
| 1.3.6.1.4.1.207.8.12.2.4.2.1 | ScalaratiNextAvailableVirtIfIndex | read-only | mandatory | The value of the next available virtual ifIndex. This object is used by an NMS to select an index value for row-creation in tables indexed by ifIndex. The curr… |
| 1.3.6.1.4.1.207.8.12.2.4.3 | NodeatiEncapsulationGroup | |||
| 1.3.6.1.4.1.207.8.12.2.4.3.1 | TableatiVlanEncapsIfTable | not-accessible | mandatory | This table lists VLAN encapsulation interfaces that exist within a device. A single entry exists in this list for each VLAN encapsulation interface in the syst… |
| 1.3.6.1.4.1.207.8.12.2.4.3.1.1 | RowatiVlanEncapsIfEntry | not-accessible | mandatory | An individual VLAN encapsulation interface entry. When an NMS wishes to create a new entry in this table, it must obtain a non-zero index from the atiNextAvail… |
| 1.3.6.1.4.1.207.8.12.2.4.3.1.1.1 | ColumnatiVlanEncapsIfIndex | read-write | mandatory | The index value of this row and the encapsulation interface's ifIndex in the ifTable. The NMS obtains the index value used for creating a row in this table by … |
| 1.3.6.1.4.1.207.8.12.2.4.3.1.1.2 | ColumnatiVlanEncapsIfType | read-write | mandatory | The encapsulation algorithm used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.207.8.12.2.4.3.1.1.3 | ColumnatiVlanEncapsIfTag | read-write | mandatory | The tag used when encapsulating packets transmitted, or de-encapsulating packets received through this interface. |
| 1.3.6.1.4.1.207.8.12.2.4.3.1.1.4 | ColumnatiVlanEncapsIfStatus | read-write | mandatory | The row status for this VLAN encapsulation interface. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may … |
| 1.3.6.1.4.1.207.8.12.2.4.5 | NodeatiProtocolGroup | |||
| 1.3.6.1.4.1.207.8.12.2.4.5.1 | TableatiVlanProtocolTable | not-accessible | mandatory | Table of defined combinations of protocol IDs that make up one protocol definition name. All members of one protocol definition share the same atiVlanProtocolI… |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1 | RowatiVlanProtocolEntry | not-accessible | mandatory | One member protocol ID of a protocol definition. |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.1 | ColumnatiVlanProtocolIndex | read-write | mandatory | An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7). |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.2 | ColumnatiVlanProtocolIdIndex | read-write | mandatory | An index representing a particular protocol ID within a protocol grouping. A limited number of protocol IDs may be defined per atiVlanProtocolIndex (up to 6). |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.3 | ColumnatiVlanProtocolName | read-write | mandatory | A human-readable string representing this protocol. This string should be the same for all entries sharing a given atiVlanProtocolIndex. A atiVlanProtocolEntry… |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.4 | ColumnatiVlanProtocolDllEncapsType | read-write | mandatory | Represents the type of data-link encapsulation in which the atiVlanProtocolId protocol ID is carried. The value any(1) is used to indicate a wildcard and match… |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.5 | ColumnatiVlanProtocolId | read-write | mandatory | The protocol ID: for entries of type ethertype(2) or llcSnapEthertype(4) this represents a 16-bit protocol ID. For entries of type llc(3) it represents a conca… |
| 1.3.6.1.4.1.207.8.12.2.4.5.1.1.6 | ColumnatiVlanProtocolStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.207.8.12.2.4.5.2 | TableatiVlanProtocolVlanTable | not-accessible | mandatory | Table to apply one of the protocol definitions in atiVlanProtocolTable to a given VLAN This applies to all ports that are untagged in this VLAN). A limited num… |
| 1.3.6.1.4.1.207.8.12.2.4.5.2.1 | RowatiVlanProtocolVlanEntry | not-accessible | mandatory | A mapping of untagged packets of one protocol onto a particular VLAN. |
| 1.3.6.1.4.1.207.8.12.2.4.5.2.1.1 | ColumnatiVlanProtocolVlanIfIndex | read-write | mandatory | The index value of this row and the vlan's ifIndex in the ifTable. The NMS obtains the index value for this row by reading the atiNextAvailableVirtIfIndex obje… |
| 1.3.6.1.4.1.207.8.12.2.4.5.2.1.2 | ColumnatiVlanProtocolVlanProtocolIndex | read-write | mandatory | An index representing a protocol grouping of protocol ID values. A limited number of protocol groupings may be defined (up to 7). |
| 1.3.6.1.4.1.207.8.12.2.4.5.2.1.3 | ColumnatiVlanProtocolVlanStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.207.8.12.2.5 | IdentityatiQos | Atkk Quality-of-Service objects | ||
| 1.3.6.1.4.1.207.8.12.2.5.1 | NodeatiQosCommon | |||
| 1.3.6.1.4.1.207.8.12.2.5.1.4 | ScalaratiQosMode | read-write | mandatory | Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p prio… |
| 1.3.6.1.4.1.207.8.12.2.5.1.5 | ScalaratiQosUnconfigure | read-write | mandatory | Setting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6 | TableatiQosProfileTable | not-accessible | mandatory | This table lists QoS profiles. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1 | RowatiQosProfileEntry | not-accessible | mandatory | An individual QoS profile Entry. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.1 | ColumnatiQosProfileIndex | read-write | mandatory | An index that uniquely identifies an entry in the qos table. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.2 | ColumnatiQosProfileName | read-write | mandatory | A unique qos profile name. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.3 | ColumnatiQosProfileMinBw | read-write | mandatory | The minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possib… |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.4 | ColumnatiQosProfileMaxBw | read-write | mandatory | The maximum percentage of bandwidth that this queue is permitted to use |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.5 | ColumnatiQosProfilePriority | read-write | mandatory | The level of priority in which this queue will be serviced by the Switch. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.6 | ColumnatiQosProfileRowStatus | read-write | mandatory | The status of the atiQosProfile entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active… |
| 1.3.6.1.4.1.207.8.12.2.5.1.7 | TableatiQosByVlanMappingTable | not-accessible | mandatory | Table to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table correspon… |
| 1.3.6.1.4.1.207.8.12.2.5.1.7.1 | RowatiQosByVlanMappingEntry | not-accessible | mandatory | The QoS associated with a particular Vlan. |
| 1.3.6.1.4.1.207.8.12.2.5.1.7.1.1 | ColumnatiQosByVlanMappingQosProfileIndex | read-write | mandatory | Value of atiQosProfileIndex that uniquely identifies a QoS Profile entry in atiQosProfileTable. This indicates the QoS to be given to traffic for this Vlan in … |
| 1.3.6.1.4.1.207.8.12.2.6 | IdentityatiPort | Atkk network port objects | ||
| 1.3.6.1.4.1.207.8.12.2.6 | Nodeoverheat | A overheat trap indicates that the on board tempature sensor has reported a overheat condition. System will shutdown until unit has sufficiently cooled such th… | ||
| 1.3.6.1.4.1.207.8.12.2.6.1 | TableatiPortLoadshareTable | not-accessible | mandatory | A table of bindings between a master port and its load-sharing slaves: create/delete entries here to add/delete a port to/from a load-sharing group. Default is… |
| 1.3.6.1.4.1.207.8.12.2.6.1.1 | RowatiPortLoadshareEntry | not-accessible | mandatory | A binding between a master port and one of its load-sharing slave ports. |
| 1.3.6.1.4.1.207.8.12.2.6.1.1.1 | ColumnatiPortLoadshareMasterIfIndex | read-write | mandatory | The ifIndex value which identifies the port controlling a loadsharing group of ports which includes atiPortLoadshareSlaveIfIndex. |
| 1.3.6.1.4.1.207.8.12.2.6.1.1.2 | ColumnatiPortLoadshareSlaveIfIndex | read-write | mandatory | The ifIndex value which identifies the port which is a member of a loadsharing group controlled by atiPortLoadshareMasterIfIndex. |
| 1.3.6.1.4.1.207.8.12.2.6.1.1.3 | ColumnatiPortLoadshareGrouping | read-write | mandatory | The Grouping value which identifies if load sharing is in pair or quad. |
| 1.3.6.1.4.1.207.8.12.2.6.1.1.4 | ColumnatiPortLoadshareStatus | read-write | mandatory | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.207.8.12.2.7 | Nodefanfailed | A fan failed trap indicates one or more of the cooling fans inside the device has failed. A fanOK trap will be sent once the fan has attained normal operation. | ||
| 1.3.6.1.4.1.207.8.12.2.8 | NodefanOK | A fan has transitioned out of a failure state and is now operating correctly. | ||
| 1.3.6.1.4.1.207.8.12.2.9 | NodeinvalidLoginAttempt | A user attempted to login to console or by telnet but was refused access due to incorrect username or password | ||
| 1.3.6.1.4.1.207.8.12.2.10 | NodepowerSupplyFail | One or more sources of power to this agent has failed. Presumably a redundant power-supply has taken over. | ||
| 1.3.6.1.4.1.207.8.12.2.11 | NodepowerSupplyGood | One or more previously bad sources of power to this agent has come back to life without causing an agent restart. | ||
| 1.3.6.1.4.1.207.8.12.2.12 | NoderpsAlarm | Attached Redundant Power Supply device is indicating an alarm condition. | ||
| 1.3.6.1.4.1.207.8.12.2.13 | NoderpsNoAlarm | Attached Redundant Power Supply device is no longer indicating an alarm condition. |