CERENT-FC-MIB
144 objects
This MIB module defines the managed objects for performance monitoring of supported Fibre Channel interfaces.
Imported Objects
| CERENT-GLOBAL-REGISTRY | cerentGeneric cerentModules cerentRequirements |
| CERENT-TC | CerentPeriod |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3607.1.10.100 | IdentitycerentFcMIB | This MIB module defines the managed objects for performance monitoring of supported Fibre Channel interfaces. | ||
| 1.3.6.1.4.1.3607.2.60 | NodecerentFcMIBObjects | |||
| 1.3.6.1.4.1.3607.2.60.1 | NodecerentFc | |||
| 1.3.6.1.4.1.3607.2.60.1.1 | TablecFcStatsTable | not-accessible | current | This table reports the current values of the Fibre channel stats on the supported interfaces. |
| 1.3.6.1.4.1.3607.2.60.1.1.1 | RowcFcStatsEntry | not-accessible | current | A collection of Fibre Channel statisctics on an interface. |
| 1.3.6.1.4.1.3607.2.60.1.1.1.10 | ColumncFcStatsInvalidOrdSets | read-only | current | This object gives the number of invalid ordered sets encountered on this interface. This object only shows the lower word value of the counter.The high word va… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.20 | ColumncFcStatsInvalidOrdSetsHigh | read-only | current | This object gives the higher word value the number of invalid ordered sets on the particular interface. If the value of cFcStatsInvalidOrdSets is greater than … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.30 | ColumncFcStatsEncodingDispErr | read-only | current | This object gives the number of encoding disparity errors encountered on this interface. This object only shows the lower word value of the counter.The high wo… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.40 | ColumncFcStatsEncodingDispErrHigh | read-only | current | This object gives the higher word value the number of encoding disparity errors on the particular interface. If the value of cFcStatsEncodingDispErr is greater… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.50 | ColumncFcStatsInTotalErr | read-only | current | This object gives the value of the total number of errors encountered on the particular interface. This object only shows the lower word value of the counter.T… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.60 | ColumncFcStatsInTotalErrHigh | read-only | current | This object gives the higher word value the total number of errors encountered on the particular interface. If the value of cFcStatsInTotalErr is greater than … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.70 | ColumncFcStatsInFramesTrunc | read-only | current | This object gives the value of the number of fibre channel truncated frames received on this interface. This object only shows the lower word value of the coun… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.80 | ColumncFcStatsInFramesTruncHigh | read-only | current | This object gives the higher word value the number of fibre channel truncated frames received on this interface. If the value of cFcStatsInFramesTrunc is great… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.90 | ColumncFcStatsInFramesTooLong | read-only | current | This object gives the number of fibre channel frames received on this interface with a length greater than what was agreed to. This object only shows the lower… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.100 | ColumncFcStatsInFramesTooLongHigh | read-only | current | This object gives the higher word value the number of fibre channel frames received on this interface with a length greater than what was agreed to. If the val… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.110 | ColumncFcStatsInFramesBadCRC | read-only | current | The counter associated with the number of frames received with invalid CRC, on this interface. This object only shows the lower word value of the counter.The h… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.120 | ColumncFcStatsInFramesBadCRCHigh | read-only | current | This object gives the higher word value of the number of frames received with invalid CRC, on this interface. If the value of cFcStatsInFramesBadCRC is greater… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.130 | ColumncFcStatsInFrames | read-only | current | The counter associated with the number of fibre channel frames received on this interface. This object only shows the lower word value of the counter.The high … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.140 | ColumncFcStatsInFramesHigh | read-only | current | This object gives the higher word value the number of fibre channel frames received on this interface. If the value of cFcStatsInFrames is greater than 4,294,9… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.150 | ColumncFcStatsInElements | read-only | current | This object gives the value of the number of received bytes on the particular interface. This object only shows the lower word value of the counter.The high wo… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.160 | ColumncFcStatsInElementsHigh | read-only | current | This object gives the higher word value the number of received bytes on the particular interface. If the value of cFcStatsInElements is greater than 4,294,967,… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.170 | ColumncFcStatsInDiscards | read-only | current | This object gives the value of the number of received frames on this interface that were discarded. This object only shows the lower word value of the counter.… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.180 | ColumncFcStatsInDiscardsHigh | read-only | current | This object gives the higher word value the number of received frames discarded on the particular interface. If the value of cFcStatsInDiscards is greater than… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.190 | ColumncFcStatsOutFramesBadCRC | read-only | current | This object gives the number of frames transmitted with invalid CRC, on this interface. This object only shows the lower word value of the counter.The high wor… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.200 | ColumncFcStatsOutFramesBadCRCHigh | read-only | current | This object gives the higher word value the number of frames transmitted with invalid CRC, on this interface. If the value of cFcStatsOutFramesBadCRC is greate… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.210 | ColumncFcStatsOutFrames | read-only | current | This object gives the number of fibre channel frames transmitted on this interface. This object only shows the lower word value of the counter.The high word va… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.220 | ColumncFcStatsOutFramesHigh | read-only | current | This object gives the higher word value of the number of fibre channel frames transmitted on this interface. If the value of cFcStatsOutFrames is greater than … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.230 | ColumncFcStatsOutElements | read-only | current | This object gives the value of the number of trasmitted bytes on the particular interface. This object only shows the lower word value of the counter.The high … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.240 | ColumncFcStatsOutElementsHigh | read-only | current | This object gives the higher word value the number of transmitted bytes on the particular interface. If the value of cFcStatsOutElements is greater than 4,294,… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.250 | ColumncFcStatsOutDiscards | read-only | current | This object gives the number of transmitted frames on this interface that were discarded. This object only shows the lower word value of the counter.The high w… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.260 | ColumncFcStatsOutDiscardsHigh | read-only | current | This object gives the higher word value of the number of transmitted frames on this interface that were discarded. If the value of cFcStatsOutDiscards is great… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.270 | ColumncFcStatsLinkResets | read-only | current | This object gives the value of the number of link resets detected on this particular interface. This object only shows the lower word value of the counter.The … |
| 1.3.6.1.4.1.3607.2.60.1.1.1.280 | ColumncFcStatsLinkResetsHigh | read-only | current | This object gives the higher word value the number of link resets detected on the particular interface. If the value of cFcStatsLinkResets is greater than 4,29… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.290 | ColumncFcStatsGfpInSBitErr | read-only | current | This object gives the value of the number of single bit GFP errors received on this interface. This object only shows the lower word value of the counter.The h… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.300 | ColumncFcStatsGfpInSBitErrHigh | read-only | current | This object gives the higher word value the number of single bit GFP errors received on this interface. If the value of cFcStatsGfpInSBitErr is greater than 4,… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.310 | ColumncFcStatsGfpInMBitErr | read-only | current | This object gives the value of the number of multi bit GFP errors received on this interface. This object only shows the lower word value of the counter.The hi… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.320 | ColumncFcStatsGfpInMBitErrHigh | read-only | current | This object gives the higher word value the number of multi bit GFP errors received on this interface. If the value of cFcStatsGfpInMBitErr is greater than 4,2… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.330 | ColumncFcStatsGfpInTypeInvalid | read-only | current | This object gives the value of the number of GFP frames received on this interface with an invalid type. This object only shows the lower word value of the cou… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.340 | ColumncFcStatsGfpInTypeInvalidHigh | read-only | current | This object gives the higher word value of the number of GFP frames received on this interface with an invalid type. If the value of cFcStatsGfpInTypeInvalid i… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.350 | ColumncFcStatsGfpInSBlkCRCErr | read-only | current | This object gives the value of the number of GFP super block CRC errors received on this interface. This object only shows the lower word value of the counter.… |
| 1.3.6.1.4.1.3607.2.60.1.1.1.360 | ColumncFcStatsGfpInSBlkCRCErrHigh | read-only | current | This object gives the higher word value the number of GFP super block CRC errors received on the particular interface. If the value of cFcStatsGfpInSblkCRCErr … |
| 1.3.6.1.4.1.3607.2.60.1.2 | TablecFcStatsHCTable | not-accessible | current | This table reports GFP stats on supported Fibre Channel interfaces. |
| 1.3.6.1.4.1.3607.2.60.1.2.1 | RowcFcStatsHCEntry | not-accessible | current | A collection of Fibre channel statisctics on an interface. All the counters in this table are 64 bits counters and are useful only to SNMP v2 and v3 managers. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.10 | ColumncFcStatsInvalidOrdSetsHC | read-only | current | The counter associated with the number of invalid ordered sets encountered on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.20 | ColumncFcStatsEncodingDispErrHC | read-only | current | The counter associated with the number of encoding disparity errors encountered on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.30 | ColumncFcStatsInTotalErrHC | read-only | current | The counter associated with the total number of errors encountered on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.40 | ColumncFcStatsInFramesTruncHC | read-only | current | The counter associated with the number of fibre channel truncated frames received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.50 | ColumncFcStatsInFramesTooLongHC | read-only | current | The counter associated with the number of fibre channel frames received with a length greater than what was agreed to on this interface. This is a High Capacit… |
| 1.3.6.1.4.1.3607.2.60.1.2.1.60 | ColumncFcStatsInFramesBadCRCHC | read-only | current | The counter associated with the number of frames received with invalid CRC, on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.70 | ColumncFcStatsInFramesHC | read-only | current | The counter associated with the number of fibre channel frames received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.80 | ColumncFcStatsInElementsHC | read-only | current | The counter associated with the number of bytes received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.90 | ColumncFcStatsInDiscardsHC | read-only | current | The counter associated with the number of received frames discarded on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.100 | ColumncFcStatsOutFramesBadCRCHC | read-only | current | The counter associated with the number of transmitted frames with invalid CRC, on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.110 | ColumncFcStatsOutFramesHC | read-only | current | The counter associated with the number of fibre channel frames transmitted on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.120 | ColumncFcStatsOutElementsHC | read-only | current | The counter associated with the number of bytes transmitted on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.130 | ColumncFcStatsOutDiscardsHC | read-only | current | The counter associated with the number of transmitted frames on this interface that were discarded. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.140 | ColumncFcStatsLinkResetsHC | read-only | current | The counter associated with the number of link resets detected on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.150 | ColumncFcStatsGfpInSBitErrHC | read-only | current | The counter associated with the number of single bit GFP errors received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.160 | ColumncFcStatsGfpInMBitErrHC | read-only | current | The counter associated with the number of multi bit GFP errors received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.170 | ColumncFcStatsGfpInTypeInvalidHC | read-only | current | The counter associated with the number of GFP frames received on this interface with an invalid type. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.2.1.180 | ColumncFcStatsGfpInSBlkCRCErrHC | read-only | current | The counter associated with the number of GFP super block CRC errors received on this interface. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.3 | TablecFcHistTable | not-accessible | current | This table reports fibre channel stats on supported interfaces for previous intervals. |
| 1.3.6.1.4.1.3607.2.60.1.3.1 | RowcFcHistEntry | not-accessible | current | A collection of Fibre Channel stats history on an interface. |
| 1.3.6.1.4.1.3607.2.60.1.3.1.10 | ColumncFcHistIntervalType | not-accessible | current | This object specifies the type of interval for which the data is being obtained. |
| 1.3.6.1.4.1.3607.2.60.1.3.1.20 | ColumncFcHistIntervalNum | not-accessible | current | This object gives the number of the particular interval for which the data is being obtained. |
| 1.3.6.1.4.1.3607.2.60.1.3.1.30 | ColumncFcHistInvalidOrdSets | read-only | current | This object gives the value of the number of invalid ordered sets on the particular interface during this sampling interval. This object only shows the lower w… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.40 | ColumncFcHistInvalidOrdSetsHigh | read-only | current | This object gives the higher word value the number of invalid ordered sets on the particular interface during this sampling interval. If the value of cFcHistIn… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.50 | ColumncFcHistEncodingDispErr | read-only | current | This object gives the value of the number of encoding disparity errors on the particular interface during this sampling interval. This object only shows the lo… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.60 | ColumncFcHistEncodingDispErrHigh | read-only | current | This object gives the higher word value the number of encoding disparity errors on the particular interface during this sampling interval. If the value of cFcH… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.70 | ColumncFcHistInTotalErr | read-only | current | This object gives the total number of errors encountered on this interface during this sampling interval. This object only shows the lower word value of the co… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.80 | ColumncFcHistInTotalErrHigh | read-only | current | This object gives the higher word value of the total number of errors encountered on this interface during this sampling interval. If the value of cFcHistInTot… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.90 | ColumncFcHistInFramesTrunc | read-only | current | This object gives the number of fibre channel truncated frames received on the particular interface during this sampling interval. This object only shows the l… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.100 | ColumncFcHistInFramesTruncHigh | read-only | current | This object gives the higher word value the number of fibre channel truncated frames received on this interface during this sampling interval. If the value of … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.110 | ColumncFcHistInFramesTooLong | read-only | current | This object gives the value of the number of fibre channel frames received on this interface during this sampling interval with a length greater than what was … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.120 | ColumncFcHistInFramesTooLongHigh | read-only | current | This object gives the higher word value the number of fibre channel frames received on this interface during this sampling interval with a length greater than … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.130 | ColumncFcHistInFramesBadCRC | read-only | current | This object gives the value of the number of frames received with invalid CRC, on this interface during this sampling interval. This object only shows the lowe… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.140 | ColumncFcHistInFramesBadCRCHigh | read-only | current | This object gives the higher word value the number of frames received with invalid CRC, on this interface during this sampling interval. If the value of cFcHis… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.150 | ColumncFcHistInFrames | read-only | current | This object gives the value of the number of fibre channel frames received on this interface during this sampling interval. This object only shows the lower wo… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.160 | ColumncFcHistInFramesHigh | read-only | current | This object gives the higher word value the number of fibre channel frames received on this interface during this sampling interval. If the value of cFcHistInF… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.170 | ColumncFcHistInElements | read-only | current | This object gives the value of the number of received bytes on the particular interface during this sampling interval. This object only shows the lower word va… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.180 | ColumncFcHistInElementsHigh | read-only | current | This object gives the higher word value the number of received bytes on the particular interface during this sampling interval. If the value of cFcHistInElemen… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.190 | ColumncFcHistInDiscards | read-only | current | This object gives the the number of received frames discarded on this interface during this sampling interval. This object only shows the lower word value of t… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.200 | ColumncFcHistInDiscardsHigh | read-only | current | This object gives the higher word value of the number of received frames discarded on this interface during this sampling interval. If the value of cFcHistInDi… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.210 | ColumncFcHistOutFramesBadCRC | read-only | current | This object gives the the number of frames transmitted with invalid CRC, on this interface, during this sampling interval. This object only shows the lower wor… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.220 | ColumncFcHistOutFramesBadCRCHigh | read-only | current | This object gives the higher word value the number of frames transmitted with invalid CRC, on this interface, during this sampling interval. If the value of cF… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.230 | ColumncFcHistOutFrames | read-only | current | This object gives the value of the number of frames transmitted on the particular interface during this sampling interval. This object only shows the lower wor… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.240 | ColumncFcHistOutFramesHigh | read-only | current | This object gives the higher word value the number of frames transmitted on the particular interface during this sampling interval. If the value of cFcHistOutF… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.250 | ColumncFcHistOutElements | read-only | current | This object gives the value of the number of trasmitted bytes on the particular interface during this sampling interval. This object only shows the lower word … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.260 | ColumncFcHistOutElementsHigh | read-only | current | This object gives the higher word value of the number of transmitted bytes on the particular interface during this sampling interval. If the value of cFcHistOu… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.270 | ColumncFcHistOutDiscards | read-only | current | This object gives the number of transmitted frames discarded on this interface during this sampling interval. This object only shows the lower word value of th… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.280 | ColumncFcHistOutDiscardsHigh | read-only | current | This object gives the higher word value the number of transmitted frames discarded on this interface during this sampling interval. If the value of cFcHistOutD… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.290 | ColumncFcHistLinkResets | read-only | current | This object gives the value of the number of link resets detected on the particular interface during this sampling interval. This object only shows the lower w… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.300 | ColumncFcHistLinkResetsHigh | read-only | current | This object gives the higher word value the number of link resets detected on the particular interface during this interval. If the value of cFcHistLinkResets … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.310 | ColumncFcHistGfpInSBitErr | read-only | current | This object gives the number of single bit GFP errors received on this interface during this sampling interval. This object only shows the lower word value of … |
| 1.3.6.1.4.1.3607.2.60.1.3.1.320 | ColumncFcHistGfpInSBitErrHigh | read-only | current | This object gives the higher word value of the number of single bit GFP errors received on this interface during this sampling interval. If the value of cFcHis… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.330 | ColumncFcHistGfpInMBitErr | read-only | current | This object gives the number of multi bit GFP errors received on this interface during this sampling interval. This object only shows the lower word value of t… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.340 | ColumncFcHistGfpInMBitErrHigh | read-only | current | This object gives the higher word value the number of multi bit GFP errors received on this interface during this sampling interval. If the value of cFcHistGfp… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.350 | ColumncFcHistGfpInTypeInvalid | read-only | current | This object gives the value of the number of received GFP frames with an invalid type on this interface during this sampling interval. This object only shows t… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.360 | ColumncFcHistGfpInTypeInvalidHigh | read-only | current | This object gives the higher word value of the number of received GFP frames with an invalid type on this interface, during this sampling interval. If the valu… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.370 | ColumncFcHistGfpInSBlkCRCErr | read-only | current | This object gives the value of the number of super block CRC GFP errors received on this interface during this sampling interval. This object only shows the lo… |
| 1.3.6.1.4.1.3607.2.60.1.3.1.380 | ColumncFcHistGfpInSBlkCRCErrHigh | read-only | current | This object gives the higher word value the number of super block CRC GFP errors received on this interface during this sampling interval. If the value of cFcH… |
| 1.3.6.1.4.1.3607.2.60.1.4 | TablecFcHistHCTable | not-accessible | current | This table reports history of fibre channel stats on supported Fibre Channel interfaces. |
| 1.3.6.1.4.1.3607.2.60.1.4.1 | RowcFcHistHCEntry | not-accessible | current | A collection of history of Fibre channel statisctics on an interface. All the counters in this table are 64 bits counters and are useful only to SNMP v2 and v3… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.10 | ColumncFcHistInvalidOrdSetsHC | read-only | current | The counter associated with the number of invalid ordered sets encountered on this interface during this sampling interval. This is a High Capacity ( 64 bit ) … |
| 1.3.6.1.4.1.3607.2.60.1.4.1.20 | ColumncFcHistEncodingDispErrHC | read-only | current | The counter associated with the number of encoding disparity errors encountered on this interface during this sampling interval. This is a High Capacity ( 64 b… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.30 | ColumncFcHistInTotalErrHC | read-only | current | The counter associated with the total number of errors encountered on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.40 | ColumncFcHistInFramesTruncHC | read-only | current | The counter associated with the number of fibre channel truncated frames received on this interface during this sampling interval. This is a High Capacity ( 64… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.50 | ColumncFcHistInFramesTooLongHC | read-only | current | The counter associated with the number of fibre channel frames received on this interface during this sampling interval, with a length greater than what was ag… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.60 | ColumncFcHistInFramesBadCRCHC | read-only | current | The counter associated with the number of frames received with an invalid CRC, on this interface during this sampling interval. This is a High Capacity ( 64 bi… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.70 | ColumncFcHistInFramesHC | read-only | current | The counter associated with the number of frames received on this interface, during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.80 | ColumncFcHistInElementsHC | read-only | current | The counter associated with the number of bytes received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.90 | ColumncFcHistInDiscardsHC | read-only | current | The counter associated with the number of received frames discarded on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.100 | ColumncFcHistOutFramesBadCRCHC | read-only | current | The counter associated with the number of frames transmitted with an invalid CRC, on this interface during this sampling interval. This is a High Capacity ( 64… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.110 | ColumncFcHistOutFramesHC | read-only | current | The counter associated with the number of fibre channel frames transmitted on this interface during this sampling interval. This is a High Capacity ( 64 bit ) … |
| 1.3.6.1.4.1.3607.2.60.1.4.1.120 | ColumncFcHistOutElementsHC | read-only | current | The counter associated with the number of bytes received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.130 | ColumncFcHistOutDiscardsHC | read-only | current | The counter associated with the number of transmitted frames discarded on this interface during this sampling interval. This is a High Capacity ( 64 bit ) coun… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.140 | ColumncFcHistLinkResetsHC | read-only | current | The counter associated with the number of link resets detected on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.60.1.4.1.150 | ColumncFcHistGfpInSBitErrHC | read-only | current | The counter associated with the number of single bit GFP errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) co… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.160 | ColumncFcHistGfpInMBitErrHC | read-only | current | The counter associated with the number of multi bit GFP errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) cou… |
| 1.3.6.1.4.1.3607.2.60.1.4.1.170 | ColumncFcHistGfpInTypeInvalidHC | read-only | current | The counter associated with the number of GFP frames with invalid type received on this interface, during this sampling interval. This is a High Capacity ( 64 … |
| 1.3.6.1.4.1.3607.2.60.1.4.1.180 | ColumncFcHistGfpInSBlkCRCErrHC | read-only | current | The counter associated with the number of GFP super block CRC errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit… |
| 1.3.6.1.4.1.3607.2.60.1.5 | TablecFcAlarmTable | not-accessible | current | A list of cFcAlarm entries. |
| 1.3.6.1.4.1.3607.2.60.1.5.1 | RowcFcAlarmEntry | not-accessible | current | A list of parameters that set up a periodic checking for cFcAlarm conditions. |
| 1.3.6.1.4.1.3607.2.60.1.5.1.10 | ColumncFcAlarmIndex | not-accessible | current | An index that uniquely identifies an entry in the cFcAlarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the dev… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.20 | ColumncFcAlarmInterval | read-write | current | The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.30 | ColumncFcAlarmVariable | read-write | current | The object identifier of the particular variable to be sampled. |
| 1.3.6.1.4.1.3607.2.60.1.5.1.40 | ColumncFcAlarmSampleType | read-write | current | The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), … |
| 1.3.6.1.4.1.3607.2.60.1.5.1.50 | ColumncFcAlarmValue | read-only | current | The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the sample… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.60 | ColumncFcAlarmValueHigh | read-only | current | The higher word value of the statistic during the last sampling period. If the value of cFcAlarmValue is greater than 4,294,967,295, the higher word value will… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.70 | ColumncFcAlarmStartupAlarm | read-write | current | The cFcAlarm that may be sent when this entry is set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThresho… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.80 | ColumncFcAlarmRisingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.90 | ColumncFcAlarmRisingThresholdHigh | read-write | current | The upper word value of the rising threshold for the sampled statistic. If the value of threshold to be set in cFcAlarmRisingThreshold is greater than 4,294,96… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.100 | ColumncFcAlarmFallingThreshold | read-write | current | A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was … |
| 1.3.6.1.4.1.3607.2.60.1.5.1.110 | ColumncFcAlarmFallingThresholdHigh | read-write | current | The upper word value of the falling threshold for the sampled statistic. If the value of threshold to be set in cFcAlarmFallingThreshold is greater than 4,294,… |
| 1.3.6.1.4.1.3607.2.60.1.5.1.120 | ColumncFcAlarmStatus | read-write | current | The status of this cFcAlarm entry. |
| 1.3.6.1.4.1.3607.5.40 | NodecerentFcMIBConformance | |||
| 1.3.6.1.4.1.3607.5.40.1 | NodecerentFcMIBCompliances | |||
| 1.3.6.1.4.1.3607.5.40.1.1 | CompliancecerentFcMIBCompliance | current | The compliance statement for platforms that monitor the Fibre channel interfaces with respect to error counters, for the physical layer. | |
| 1.3.6.1.4.1.3607.5.40.2 | NodecerentFcMIBGroups | |||
| 1.3.6.1.4.1.3607.5.40.2.1 | GroupcerentFcStatsGroup | current | The collection of objects to give stats related to the performance of an fibre channel interface. | |
| 1.3.6.1.4.1.3607.5.40.2.2 | GroupcerentFcHistGroup | current | The collection of objects to give previous stats related to the performance of an fibre channel interface. | |
| 1.3.6.1.4.1.3607.5.40.2.3 | GroupcerentFcStatsHCGroup | current | The collection of 64 bit objects to give stats related to the performance of an fibre channel interface. | |
| 1.3.6.1.4.1.3607.5.40.2.4 | GroupcerentFcHistHCGroup | current | The collection of 64 bit objects to give previous stats related to the performance of an fibre channel interface. | |
| 1.3.6.1.4.1.3607.5.40.2.5 | GroupcerentFcAlarmGroup | current | The collection of alarm thresholds configured on fibre channel interfaces. |