CERENT-MSDWDM-MIB
212 objects
This MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol specific error counters for DWDM optical switches. This MIB contains four groups. The first group, cerentMsDwdmIfGroup, handles the physical layer related interface configurations. The second group, cerentMsDwdmOtnGroup, provides objects for configuring OTN (G.709) related thresholds and for collecting OTN (G.709) related performance statistics for the current and previous 15 min and 24 hour intervals. The third group, cerentMsDwdmFECGroup provides objects for monitoring FEC (Fault Error Correction) statistics for the current and previous 15 min and 24 hour intervals. It also contains objects for configuring FEC error thresholds. The fourth group,cerentMsDwdm8B10BGroup contains 8B10B counters, for the current and previous 15 min and 24 hour intervals for interfaces like Fiber Channel/Gig E.
Imported Objects
| CERENT-GLOBAL-REGISTRY | cerentGeneric cerentModules cerentRequirements |
| CERENT-TC | CerentPeriod |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3607.1.10.80 | IdentitycerentMsDwdmMIB | This MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol specific error counters for DWDM o… | ||
| 1.3.6.1.4.1.3607.2.40 | NodecerentMsDwdmMIBObjects | |||
| 1.3.6.1.4.1.3607.2.40.1 | NodecerentMsDwdmIf | |||
| 1.3.6.1.4.1.3607.2.40.1.1 | TablecMsDwdmIfConfigTable | not-accessible | current | This table allows physical layer related interface configurations on an interface. |
| 1.3.6.1.4.1.3607.2.40.1.1.1 | RowcMsDwdmIfConfigEntry | not-accessible | current | A collection of objects for configuration on an interface. |
| 1.3.6.1.4.1.3607.2.40.1.1.1.1 | ColumncMsDwdmIfConfigProtocol | read-write | current | This object is used to specify the protocol of the data carried over the interface. This object applies to linecards which support a variety of protocols and a… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.2 | ColumncMsDwdmIfConfigDataRate | read-write | current | This object allows the management client to set the data rate across the interface. passThru denotes 2R, Reamplification and reshaping. stm1 denotes 3R, Reamp,… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.3 | ColumncMsDwdmIfConfigLoopback | read-write | current | This object allows the management client to configure loopback for the client side or trunk side interfaces. 'noLoop' - No Loopback present. 'diagnosticLoop' -… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.4 | ColumncMsDwdmIfConfigWavelength | read-write | current | This object allows the management client to configure the wavelength mode of operation to the applicable interfaces. |
| 1.3.6.1.4.1.3607.2.40.1.1.1.5 | ColumncMsDwdmIfConfigOtnStatus | read-write | current | This object allows the management client to enable the OTN (G.709) on an applicable interface,by writing a value of 'true' to this object. To bypass the monito… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.6 | ColumncMsDwdmIfConfigFECStatus | read-write | current | This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'true'… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.7 | ColumncMsDwdmIfOpticsValidIntervals | read-only | current | This object gives the number of contiguous 15 minute intervals for which valid Optical Monitor PM data is available for the particular interface. The value of … |
| 1.3.6.1.4.1.3607.2.40.1.1.1.8 | ColumncMsDwdmIfOTNValidIntervals | read-only | current | This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for the particular interface. The v… |
| 1.3.6.1.4.1.3607.2.40.1.1.1.9 | ColumncMsDwdmIfFECValidIntervals | read-only | current | This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The value of this object … |
| 1.3.6.1.4.1.3607.2.40.1.1.1.10 | ColumncMsDwdmIfConfigFECMode | read-write | current | This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'enabl… |
| 1.3.6.1.4.1.3607.2.40.1.2 | TablecMsDwdmIfTransportTable | not-accessible | current | This table defines optical transport layer related interface configurations on an interface. |
| 1.3.6.1.4.1.3607.2.40.1.2.1 | RowcMsDwdmIfTransportEntry | not-accessible | current | A collection of objects for configuration on an optical transport interface. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.1 | ColumncMsDwdmIfTransportRingDirection | not-accessible | obsolete | This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be eas… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.2 | ColumncMsDwdmIfTransportPortRule | read-only | current | This object is used to specify the type of the optical port. A transport optical port can assume one of the following values: input(1) input-express(2) output(… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.3 | ColumncMsDwdmIfTransportPower | read-only | current | This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.4 | ColumncMsDwdmIfTransportReferencePower | read-only | current | This object is used to specify the optical transport reference power. This is the value of power the network element will expect on the photodiode. In case the… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.5 | ColumncMsDwdmIfTransportCalibratedPower | read-write | current | This object is used to specify the optical transport calibration power. This is the power offset that user contribute in case the 'reference' value setup by ne… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.6 | ColumncMsDwdmIfTransportInsertionLoss | read-only | current | This object is used to specify the value of Insertion Loss of the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.7 | ColumncMsDwdmIfTransportLaserStatus | read-only | current | This object is used to specify the status of the laser. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.8 | ColumncMsDwdmIfTransportAmplifierMode | read-write | current | This object is used to specify the working amplifier mode. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.9 | ColumncMsDwdmIfTransportGain | read-only | current | This object is used to specify the value of the gain of an amplifier |
| 1.3.6.1.4.1.3607.2.40.1.2.1.10 | ColumncMsDwdmIfTransportReferenceTilt | read-only | current | This object is used to specify the amplifier tilt value calculated by the network element. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.11 | ColumncMsDwdmIfTransportCalibratedTilt | read-write | current | This object is used to specify the amplifier tilt offset added as offset by user in order to tune the network element calculated ('reference') value |
| 1.3.6.1.4.1.3607.2.40.1.2.1.12 | ColumncMsDwdmIfTransportDCULoss | read-only | current | This object is used to specify the value of Insertion Loss measured for the Dispersion Compensation Unit |
| 1.3.6.1.4.1.3607.2.40.1.2.1.13 | ColumncMsDwdmIfTransportOSRI | read-write | current | This value indicates the status of the Optical Safety Remote Interlock Valid values are - enable(1) : the OSRI is enable disable(2) : the OSRI is disable none(… |
| 1.3.6.1.4.1.3607.2.40.1.2.1.14 | ColumncMsDwdmIfTransportExpectedGain | read-write | current | This object is used to specify the value of the expected gain of an amplifier |
| 1.3.6.1.4.1.3607.2.40.1.2.1.15 | ColumncMsDwdmIfTransportSideIdentifier | read-only | current | This object is used to specify the facing side of the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.2.1.16 | ColumncMsDwdmIfTransportAddPower | read-only | current | This object is used to specify the ADD optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be … |
| 1.3.6.1.4.1.3607.2.40.1.2.1.17 | ColumncMsDwdmIfTransportOSCPower | read-only | current | This object is used to specify the OSC optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be … |
| 1.3.6.1.4.1.3607.2.40.1.2.1.18 | ColumncMsDwdmIfTransportTDCUCompensation | read-only | current | This object is used to specify the TDCU Compensation value of the optical port belong to a TDCU card. |
| 1.3.6.1.4.1.3607.2.40.1.3 | TablecMsDwdmIfMultiplexSectionTable | not-accessible | current | This table defines optical multiplex section (band) layer related interface configurations on an interface. |
| 1.3.6.1.4.1.3607.2.40.1.3.1 | RowcMsDwdmIfMultiplexSectionEntry | not-accessible | current | A collection of objects for configuration on an optical multiplex section (band) interface. |
| 1.3.6.1.4.1.3607.2.40.1.3.1.1 | ColumncMsDwdmIfMultiplexSectionRingDirection | not-accessible | obsolete | This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be eas… |
| 1.3.6.1.4.1.3607.2.40.1.3.1.2 | ColumncMsDwdmIfMultiplexSectionPortRule | read-only | current | This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6). |
| 1.3.6.1.4.1.3607.2.40.1.3.1.3 | ColumncMsDwdmIfMultiplexSectionPower | read-only | current | This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read… |
| 1.3.6.1.4.1.3607.2.40.1.3.1.4 | ColumncMsDwdmIfMultiplexSectionReferencePower | read-only | current | This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In … |
| 1.3.6.1.4.1.3607.2.40.1.3.1.5 | ColumncMsDwdmIfMultiplexSectionCalibratedPower | read-write | current | This object is used to specify the optical MultiplexSection calibration power. This is the power offset that user contribute in case the 'reference' value setu… |
| 1.3.6.1.4.1.3607.2.40.1.3.1.6 | ColumncMsDwdmIfMultiplexSectionInsertionLoss | read-only | current | This object is used to specify the value of Insertion Loss of the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.3.1.7 | ColumncMsDwdmIfMultiplexSectionActualBand | read-only | current | This object is used to specify the value of Wavelength group which is tuned the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.3.1.8 | ColumncMsDwdmIfMultiplexSectionExpectedBand | read-write | current | This object is used to specify the value of Wavelength group that the user expects the optical port will assume. |
| 1.3.6.1.4.1.3607.2.40.1.3.1.9 | ColumncMsDwdmIfMultiplexSectionSideIdentifier | read-only | current | This object is used to specify the facing side of the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.4 | TablecMsDwdmIfChannelTable | not-accessible | current | This table defines optical channel layer related interface configurations on an interface. |
| 1.3.6.1.4.1.3607.2.40.1.4.1 | RowcMsDwdmIfChannelEntry | not-accessible | current | A collection of objects for configuration on an optical channel interface. |
| 1.3.6.1.4.1.3607.2.40.1.4.1.1 | ColumncMsDwdmIfChannelRingDirection | not-accessible | obsolete | This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be eas… |
| 1.3.6.1.4.1.3607.2.40.1.4.1.2 | ColumncMsDwdmIfChannelPortRule | read-only | current | This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6). |
| 1.3.6.1.4.1.3607.2.40.1.4.1.3 | ColumncMsDwdmIfChannelPower | read-only | current | This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read… |
| 1.3.6.1.4.1.3607.2.40.1.4.1.4 | ColumncMsDwdmIfChannelReferencePower | read-only | current | This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In … |
| 1.3.6.1.4.1.3607.2.40.1.4.1.5 | ColumncMsDwdmIfChannelCalibratedPower | read-write | current | This object is used to specify the optical Channel calibration power. This is the power offset that user contribute in case the 'reference' value setup by netw… |
| 1.3.6.1.4.1.3607.2.40.1.4.1.6 | ColumncMsDwdmIfChannelInsertionLoss | read-only | current | This object is used to specify the value of Insertion Loss of the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.4.1.7 | ColumncMsDwdmIfChannelActualWavelength | read-only | current | This object is used to specify the value of Wavelength that is tuned the optical port. |
| 1.3.6.1.4.1.3607.2.40.1.4.1.8 | ColumncMsDwdmIfChannelExpectedWavelength | read-write | current | This object is used to specify the value of Wavelength that the user expects the optical port will assume. |
| 1.3.6.1.4.1.3607.2.40.1.4.1.9 | ColumncMsDwdmIfChannelSideIdentifier | read-only | current | This object is used to specify the facing side of the optical port. |
| 1.3.6.1.4.1.3607.2.40.2 | NodecerentMsDwdmOtn | |||
| 1.3.6.1.4.1.3607.2.40.2.1 | TablecMsDwdmOtnThresholdsTable | not-accessible | current | This table provides objects for configuring OTN ( G.709 ) thresholds on trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.1.1 | RowcMsDwdmOtnThresholdsEntry | not-accessible | current | An entry in the cMsDwdmOtnThresholdsTable. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.1 | ColumncMsDwdmOtnThreshMonType | not-accessible | current | This object is an index to the cMsDwdmOtnThresholdsTable. It is used to specify the type of monitoring threshold being set on an interface for OTN ( G.709 ) st… |
| 1.3.6.1.4.1.3607.2.40.2.1.1.2 | ColumncMsDwdmOtnThreshIntervalType | not-accessible | current | This object is an index to the cMsDwdmOtnThresholdsTable. It specifies the interval type and monitoring location for the performance statistics. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.3 | ColumncMsDwdmOtnThreshFC | read-write | current | This object is used to set the threshold for the number of failure counts on applicable trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.4 | ColumncMsDwdmOtnThreshES | read-write | current | This object is used to set the threshold for the number of Errored Seconds on applicable trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.5 | ColumncMsDwdmOtnThreshSES | read-write | current | This object is used to set the threshold for the number of Severely Errored Seconds on applicable trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.6 | ColumncMsDwdmOtnThreshUAS | read-write | current | This object is used to set the threshold for the number of Unavailable Seconds on applicable trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.1.1.7 | ColumncMsDwdmOtnThreshBBE | read-write | current | This object is used to set the threshold for the number of Bit Block Errors on applicable trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.2 | TablecMsDwdmOtnCurrentTable | not-accessible | current | This table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.2.1 | RowcMsDwdmOtnCurrentEntry | not-accessible | current | An entry in the cMsDwdmOtnCurrentTable. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.1 | ColumncMsDwdmOtnCurrentMonType | not-accessible | current | This object is an index to the cMsDwdmOtnCurrentTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection). |
| 1.3.6.1.4.1.3607.2.40.2.2.1.2 | ColumncMsDwdmOtnCurIntervalType | not-accessible | current | This object is an index to the cMsDwdmOtnCurrentTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.3 | ColumncMsDwdmOtnCurrentFC | read-only | current | The counter associated with the number of failure counts encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.4 | ColumncMsDwdmOtnCurrentES | read-only | current | The counter associated with the number of Errored Seconds encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.5 | ColumncMsDwdmOtnCurrentSES | read-only | current | The counter associated with the number of Severely Errored Seconds encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.6 | ColumncMsDwdmOtnCurrentUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.7 | ColumncMsDwdmOtnCurrentBBE | read-only | current | The counter associated with the number of Background Block Errors encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.8 | ColumncMsDwdmOtnCurrentESR | read-only | current | The counter associated with the Errored Seconds Ratio on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.9 | ColumncMsDwdmOtnCurrentSESR | read-only | current | The counter associated with the Severely Errored Seconds ratio on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.2.1.10 | ColumncMsDwdmOtnCurrentBBER | read-only | current | The counter associated with the Background Block Errors ratio on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.2.3 | TablecMsDwdmOtnIntervalTable | not-accessible | current | This table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces. |
| 1.3.6.1.4.1.3607.2.40.2.3.1 | RowcMsDwdmOtnIntervalEntry | not-accessible | current | An entry in the cMsDwdmOtnIntervalTable. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.1 | ColumncMsDwdmOtnIntervalMonType | not-accessible | current | This object is an index to the cMsDwdmOtnIntervalTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection). |
| 1.3.6.1.4.1.3607.2.40.2.3.1.2 | ColumncMsDwdmOtnIntervalType | not-accessible | current | This object is an index to the cMsDwdmOtnIntervalTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.3 | ColumncMsDwdmOtnIntervalNum | not-accessible | current | This object is an index to the cMsDwdmOtnIntervalTable. This object gives the number of the interval. It is a number between 1 and 96, which identifies the int… |
| 1.3.6.1.4.1.3607.2.40.2.3.1.4 | ColumncMsDwdmOtnIntervalFC | read-only | current | The counter associated with the number of failure counts encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.5 | ColumncMsDwdmOtnIntervalES | read-only | current | The counter associated with the number of Errored Seconds encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.6 | ColumncMsDwdmOtnIntervalSES | read-only | current | The counter associated with the number of Severely Errored Seconds encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.7 | ColumncMsDwdmOtnIntervalUAS | read-only | current | The counter associated with the number of Unavailable Seconds encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.8 | ColumncMsDwdmOtnIntervalBBE | read-only | current | The counter associated with the number of Background Block Errors encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.9 | ColumncMsDwdmOtnIntervalESR | read-only | current | The counter associated with the Errored Seconds Ratio on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.10 | ColumncMsDwdmOtnIntervalSESR | read-only | current | The counter associated with the Severely Errored Seconds ratio on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.11 | ColumncMsDwdmOtnIntervalBBER | read-only | current | The counter associated with the Background Block Errors ratio on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.2.3.1.12 | ColumncMsDwdmOtnIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3607.2.40.3 | NodecerentMsDwdmFEC | |||
| 1.3.6.1.4.1.3607.2.40.3.1 | TablecMsDwdmFECThresholdsTable | not-accessible | current | This table contains the configurable thresholds for FEC ( Forward Error Correction ) statistics. |
| 1.3.6.1.4.1.3607.2.40.3.1.1 | RowcMsDwdmFECThresholdsEntry | not-accessible | current | An entry in the cMsDwdmFECThresholdsTable. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.1 | ColumncMsDwdmFECThreshIntervalType | not-accessible | current | This object is an index to the cMsDwdmFECThreshTable. It gives the type of the interval for which the thresholds are being set. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.2 | ColumncMsDwdmFECThreshBitErrCor | read-write | current | This object sets the threshold value of the number of Bit Errors Corrected on an applicable trunk side interface. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.3 | ColumncMsDwdmFECThreshByteErrCor | read-write | current | This object sets the threshold value of the number of Byte Errors Corrected on an applicable trunk side interface. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.4 | ColumncMsDwdmFECThreshZeroErrDet | read-write | current | This object sets the threshold value of the number of zero bit errors detected on an applicable trunk side interface. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.5 | ColumncMsDwdmFECThreshOneErrDet | read-write | current | This object sets the threshold value of the number of one bit errors detected on an applicable trunk side interface. |
| 1.3.6.1.4.1.3607.2.40.3.1.1.6 | ColumncMsDwdmFECThreshUncorWords | read-write | current | This object sets the threshold value of the number of Uncorrectable Words on an applicable trunk side interface. |
| 1.3.6.1.4.1.3607.2.40.3.2 | TablecMsDwdmFECCurrentTable | not-accessible | current | This table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface. |
| 1.3.6.1.4.1.3607.2.40.3.2.1 | RowcMsDwdmFECCurrentEntry | not-accessible | current | An entry in the cMsDwdmFECCurrentTable. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.1 | ColumncMsDwdmFECCurIntervalType | not-accessible | current | This object is an index to the cMsDwdmFECCurrentTable. It gives the type of interval for which the FEC values have been collected. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.2 | ColumncMsDwdmFECCurrentBitErrCor | read-only | current | The counter associated with the number of Bit Errors Corrected on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.3 | ColumncMsDwdmFECCurrentByteErrCor | read-only | current | The counter associated with the number of Byte Errors Corrected on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.4 | ColumncMsDwdmFECCurrentZeroErrDet | read-only | current | The counter associated with the number of zero bit errors detected on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.5 | ColumncMsDwdmFECCurrentOneErrDet | read-only | current | The counter associated with the number of one bit errors detected on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.3.2.1.6 | ColumncMsDwdmFECCurrentUncorWords | read-only | current | The counter associated with the number of Uncorrectable Words encountered on this interface in the current interval. |
| 1.3.6.1.4.1.3607.2.40.3.3 | TablecMsDwdmFECIntervalTable | not-accessible | current | This table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface. |
| 1.3.6.1.4.1.3607.2.40.3.3.1 | RowcMsDwdmFECIntervalEntry | not-accessible | current | An entry in the cMsDwdmFECIntervalTable. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.1 | ColumncMsDwdmFECIntervalType | not-accessible | current | This object is an index to the cMsDwdmFECIntervalTable. It gives the type of interval for which the FEC values have been collected. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.2 | ColumncMsDwdmFECIntervalNum | not-accessible | current | This object is an index to the cMsDwdmFECIntervalTable. It is a number between 1 and 96, which identifies the interval for which the set of FEC PM values is av… |
| 1.3.6.1.4.1.3607.2.40.3.3.1.3 | ColumncMsDwdmFECIntervalBitErrCor | read-only | current | The counter associated with the number of Bit Errors Corrected on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.4 | ColumncMsDwdmFECIntervalByteErrCor | read-only | current | The counter associated with the number of Byte Errors Corrected on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.5 | ColumncMsDwdmFECIntervalZeroErrDet | read-only | current | The counter associated with the number of zero bit errors detected on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.6 | ColumncMsDwdmFECIntervalOneErrDet | read-only | current | The counter associated with the number of one bit errors detected on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.7 | ColumncMsDwdmFECIntervalUncorWords | read-only | current | The counter associated with the number of Uncorrectable Words encountered on this interface in a particular interval. |
| 1.3.6.1.4.1.3607.2.40.3.3.1.8 | ColumncMsDwdmFECIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3607.2.40.4 | NodecerentMsDwdm8B10B | |||
| 1.3.6.1.4.1.3607.2.40.4.1 | Tablec8B10BThresholdsTable | not-accessible | current | This table contains the configurable thresholds for the 8B10B stats. |
| 1.3.6.1.4.1.3607.2.40.4.1.1 | Rowc8B10BThresholdsEntry | not-accessible | current | An entry in the c8B10BThresholds Table. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.1 | Columnc8B10BThreshIntervalType | not-accessible | current | This object is an index to the c8B10BThresholdsTable. It gives the type of interval. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.2 | Columnc8B10BThreshInvalidPkts | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshIPOverflow contains th… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.3 | Columnc8B10BThreshIPOverflow | read-write | current | This object represents the higher word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshInvalidPkts contains … |
| 1.3.6.1.4.1.3607.2.40.4.1.1.4 | Columnc8B10BThreshHCInvalidPkts | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B Invalid Packets. This a High capacity ( 64 bits ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.5 | Columnc8B10BThreshValidPkts | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshVPOverflow contains the … |
| 1.3.6.1.4.1.3607.2.40.4.1.1.6 | Columnc8B10BThreshVPOverflow | read-write | current | This object represents the higher word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshValidPkts contains the … |
| 1.3.6.1.4.1.3607.2.40.4.1.1.7 | Columnc8B10BThreshHCValidPkts | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B Valid Packets. This a High capacity ( 64 bits ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.8 | Columnc8B10BThreshIdleSets | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshISOverflow contains the high… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.9 | Columnc8B10BThreshISOverflow | read-write | current | This object represents the higher word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshIdleSets contains the lower… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.10 | Columnc8B10BThreshHCIdleSets | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B idle sets. This a High capacity ( 64 bits ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.11 | Columnc8B10BThreshNonIdleSets | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNISOverflow contains the… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.12 | Columnc8B10BThreshNISOverflow | read-write | current | This object represents the higher word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNonIdleSets contains th… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.13 | Columnc8B10BThreshHCNonIdleSets | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B non idle sets. This a High capacity ( 64 bits ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.14 | Columnc8B10BThreshDataSets | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDSOverflow contains t… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.15 | Columnc8B10BThreshDSOverflow | read-write | current | This object represents the higher word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDataSets contains th… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.16 | Columnc8B10BThreshHCDataSets | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B data code groups. This a High capacity ( 64 bits ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.1.1.17 | Columnc8B10BThreshCodeViols | read-write | current | This object represents the lower word value of the threshold associated with the number of 8B10B coding violations encountered. The object c8B10BThreshCVOverfl… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.18 | Columnc8B10BThreshCVOverflow | read-write | current | This object represents the higher word value of threshold associated with the number of 8B10B code violations encountered. The object c8B10BThreshCodeViols con… |
| 1.3.6.1.4.1.3607.2.40.4.1.1.19 | Columnc8B10BThreshHCCodeViols | read-only | current | This object is used to obtain the value of threshold configured for the number of 8B10B Coding Violations on this interface. This a High capacity ( 64 bits ) c… |
| 1.3.6.1.4.1.3607.2.40.4.2 | Tablec8B10BCurrentTable | not-accessible | current | This table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces. |
| 1.3.6.1.4.1.3607.2.40.4.2.1 | Rowc8B10BCurrentEntry | not-accessible | current | An entry in the c8B10BCurrentTable. |
| 1.3.6.1.4.1.3607.2.40.4.2.1.1 | Columnc8B10BCurIntervalType | not-accessible | current | This object is an index to the c8B10BCurrentTable. It gives the type of interval for which 8B10B data has been collected. |
| 1.3.6.1.4.1.3607.2.40.4.2.1.2 | Columnc8B10BCurrentCodeViols | read-only | current | This object gives the value of the number of 8B10B Coding Violations encountered on an interface for the current interval. This object only shows the lower wor… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.3 | Columnc8B10BCurrentCVOverflow | read-only | current | This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for the current interval. If the value of c8B10BCurre… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.4 | Columnc8B10BCurrentHCCodeViols | read-only | current | The counter associated with the number of 8B10B coding violations encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) cou… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.5 | Columnc8B10BCurrentValidPkts | read-only | current | This object gives the value of the number of 8B10B Valid Packets encountered on an interface for the current interval. This object only shows the lower word va… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.6 | Columnc8B10BCurrentVPOverflow | read-only | current | This object gives the higher word value the number of 8B10B valid packets encountered on an interface for the current interval. If the value of c8B10BCurrentVa… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.7 | Columnc8B10BCurrentHCValidPkts | read-only | current | The counter associated with the number of 8B10B valid packets on this interface in the current interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.2.1.8 | Columnc8B10BCurrentInvalidPkts | read-only | current | This object gives the value of the number of 8B10B invalid packets encountered on an interface for the current interval. This object only shows the lower word … |
| 1.3.6.1.4.1.3607.2.40.4.2.1.9 | Columnc8B10BCurrentIPOverflow | read-only | current | This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for the current interval. If the value of c8B10BCurrent… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.10 | Columnc8B10BCurrentHCInvalidPkts | read-only | current | The counter associated with the number of 8B10B invalid packets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) count… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.11 | Columnc8B10BCurrentIdleSets | read-only | current | This object gives the value of the number of 8B10B Idle sets encountered on an interface for the current interval. This object only shows the lower word value … |
| 1.3.6.1.4.1.3607.2.40.4.2.1.12 | Columnc8B10BCurrentISOverflow | read-only | current | This object gives the higher word value the number of 8B10B idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentIdleSe… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.13 | Columnc8B10BCurrentHCIdleSets | read-only | current | The counter associated with the number of 8B10B idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.2.1.14 | Columnc8B10BCurrentNonIdleSets | read-only | current | This object gives the value of the number of 8B10B non idle sets encountered on an interface for the current interval. This object only shows the lower word va… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.15 | Columnc8B10BCurrentNISOverflow | read-only | current | This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentNo… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.16 | Columnc8B10BCurrentHCNonIdleSets | read-only | current | The counter associated with the number of 8B10B non-idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.2.1.17 | Columnc8B10BCurrentDataSets | read-only | current | This object gives the value of the number of 8B10B data code groups encountered on an interface for the current interval. This object only shows the lower word… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.18 | Columnc8B10BCurrentDSOverflow | read-only | current | This object gives the higher word value the number of 8B10B data code groups encountered on an interface for the current interval. If the value of c8B10BCurren… |
| 1.3.6.1.4.1.3607.2.40.4.2.1.19 | Columnc8B10BCurrentHCDataSets | read-only | current | The counter associated with the number of 8B10B data code groups encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) coun… |
| 1.3.6.1.4.1.3607.2.40.4.3 | Tablec8B10BIntervalTable | not-accessible | current | This table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces. |
| 1.3.6.1.4.1.3607.2.40.4.3.1 | Rowc8B10BIntervalEntry | not-accessible | current | An entry in the c8B10BIntervalTable. |
| 1.3.6.1.4.1.3607.2.40.4.3.1.1 | Columnc8B10BIntervalType | not-accessible | current | This object is an index to the c8B10BIntervalTable. It gives the type of interval for which 8B10B data has been collected. |
| 1.3.6.1.4.1.3607.2.40.4.3.1.2 | Columnc8B10BIntervalNum | not-accessible | current | This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of 8B10B performance values is a… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.3 | Columnc8B10BIntervalCodeViols | read-only | current | This object gives the value of the number of 8B10B Coding Violations encountered on an interface for a particular interval. This object only shows the lower wo… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.4 | Columnc8B10BIntervalCVOverflow | read-only | current | This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for a particular interval. If the value of c8B10BInte… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.5 | Columnc8B10BIntervalHCCodeViols | read-only | current | The counter associated with the number of 8B10B coding violations encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) co… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.6 | Columnc8B10BIntervalValidPkts | read-only | current | This object gives the value of the number of 8B10B Valid Packets encountered on an interface for a particular interval. This object only shows the lower word v… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.7 | Columnc8B10BIntervalVPOverflow | read-only | current | This object gives the higher word value the number of 8B10B valid packets encountered on an interface for a particular interval. If the value of c8B10BInterval… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.8 | Columnc8B10BIntervalHCValidPkts | read-only | current | The counter associated with the number of 8B10B valid packets on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.3.1.9 | Columnc8B10BIntervalInvalidPkts | read-only | current | This object gives the value of the number of 8B10B invalid packets encountered on an interface for a particular interval. This object only shows the lower word… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.10 | Columnc8B10BIntervalIPOverflow | read-only | current | This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for a particular interval. If the value of c8B10BInterv… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.11 | Columnc8B10BIntervalHCInvalidPkts | read-only | current | The counter associated with the number of 8B10B invalid packets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) coun… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.12 | Columnc8B10BIntervalIdleSets | read-only | current | This object gives the value of the number of 8B10B Idle sets encountered on an interface for a particular interval. This object only shows the lower word value… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.13 | Columnc8B10BIntervalISOverflow | read-only | current | This object gives the higher word value the number of 8B10B idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalIdle… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.14 | Columnc8B10BIntervalHCIdleSets | read-only | current | The counter associated with the number of 8B10B idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter. |
| 1.3.6.1.4.1.3607.2.40.4.3.1.15 | Columnc8B10BIntervalNonIdleSets | read-only | current | This object gives the value of the number of 8B10B non idle sets encountered on an interface for a particular interval. This object only shows the lower word v… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.16 | Columnc8B10BIntervalNISOverflow | read-only | current | This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for a particular interval. If the value of c8B10BInterval… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.17 | Columnc8B10BIntervalHCNonIdleSets | read-only | current | The counter associated with the number of 8B10B non-idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counte… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.18 | Columnc8B10BIntervalDataSets | read-only | current | This object gives the value of the number of 8B10B data code groups encountered on an interface for a particular interval. This object only shows the lower wor… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.19 | Columnc8B10BIntervalDSOverflow | read-only | current | This object gives the higher word value the number of 8B10B data code groups encountered on an interface for a particular interval. If the value of c8B10BInter… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.20 | Columnc8B10BIntervalHCDataSets | read-only | current | The counter associated with the number of 8B10B data code groups encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) cou… |
| 1.3.6.1.4.1.3607.2.40.4.3.1.21 | Columnc8B10BIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.3607.5.30 | NodecerentMsDwdmMIBConformance | |||
| 1.3.6.1.4.1.3607.5.30.1 | NodecerentMsDwdmMIBCompliances | |||
| 1.3.6.1.4.1.3607.5.30.1.1 | CompliancecerentMsDwdmMIBCompliance | read-only | current | The compliance statement for platforms that monitor the operating status and FEC/OTN with respect to error counters, for the physical layer. |
| 1.3.6.1.4.1.3607.5.30.2 | NodecerentMsDwdmMIBGroups | |||
| 1.3.6.1.4.1.3607.5.30.2.1 | GroupcerentMsDwdmIfConfigGroup | current | The collection of objects to allow configurations and give information related to the physical layer characteristics of an interface. | |
| 1.3.6.1.4.1.3607.5.30.2.2 | GroupcerentMsDwdmOtnGroup | current | The objects used for monitoring the OTN error counters. | |
| 1.3.6.1.4.1.3607.5.30.2.3 | GroupcerentMsDwdmFECGroup | current | The objects used for monitoring the FEC error counters. | |
| 1.3.6.1.4.1.3607.5.30.2.5 | GroupcMsDwdmIfTransportGroup | current | The collection of objects to allow configurations and give information related to the optical transportp hysical layer characteristics of an interface. | |
| 1.3.6.1.4.1.3607.5.30.2.6 | GroupcMsDwdmIfMultiplexSectionTableGroup | current | The collection of objects to allow configurations and give information related to the optical multiplex section physical layer characteristics of an interface. | |
| 1.3.6.1.4.1.3607.5.30.2.7 | GroupcMsDwdmIfChannelGroup | current | The collection of objects to allow configurations and give information related to the optical channel physical layer characteristics of an interface. | |
| 1.3.6.1.4.1.3607.5.30.2.8 | Groupcerent8B10BThreshGroup | current | The collection of objects used to set the thresholds on 8B10B counters. | |
| 1.3.6.1.4.1.3607.5.30.2.9 | Groupcerent8B10BStatsGroup | current | The collection of objects used to monitor the 8B10B error counters. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IntervalType | INTEGER { fifteenMin(1), oneDay(2) } | current | This value indicates the time period over which performance monitoring data has been collected. Valid values are - fifteenMin (1) : values for the 15 min interval. oneDay (2) : values for the 1 Day interval. |
| LaserStatus | INTEGER { on(1), off(2), apr(3), none(4) } | current | This value indicates the working status of the laser. Valid values are - on(1) : laser is working off(2) : laser is switched off apr(3) : laser is working in automatic power reduction none(4) : laser is not present |
| LocationAndIntervalType | INTEGER { nearEnd15Min(1), nearEndOneDay(2), farEnd15Min(3), farEndOneDay(4) } | current | This value indicates the time period and the location for which the performace monitoring data has been collected. Valid values are - nearEnd15Min (1) : nearEnd values for the 15 min interval. nearEndOneDay (2) : nearEn… |
| MonitorType | INTEGER { path(1), section(2), tcm1(3), tcm2(4) } | current | This value indicates the type of performance statistics being monitored. Valid values are - path(1) : Performance statistics for path parameters. section(2) : Performance statistics for section parameters. tcm1(3) : Per… |
| OpticalAmplifierMode | INTEGER { gain(1), power(2), none(3), fixed-gain(4) } | current | This value indicates the amplifier working mode Valid values are - gain(1) : gain control mode power(2) : power control mode none(3) : not an amplifier port fixed-gain(4) : fixed gain control mode |
| OpticalAttenInDb | Integer32 (0..400) | current | An integer value that gives the attenuation level in 1/10ths of dB. Example: The value 80 represents an attenuation level of 8.0 dB. |
| OpticalBand | INTEGER { unknown(1), bn1530d33To1532d68(5), bn1534d25To1536d61(25), bn1538d19To1540d56(45), bn1542d14To1544d53(65), bn1546d12To1548d51(85), bn1550d12To1552d52(105), bn1554d13To1556d55(125), bn1558d17To1560d61(145) } | current | This value indicates the the wavelength group (band) The following wave lengths group are supported: bn1530d33To1532d68 : are the wavelengths from 1530.33 nm to 1532.68 nm. bn1534d25To1536d61 : are the wavelengths from … |
| OpticalPortRule | INTEGER { inputLine(1), outputLine(2), inputCom(3), outputCom(4), inputOsc(5), outputOsc(6), inputDc(7), outputDc(8), inputExpress(9), outputExpress(10), add(11), drop(12), inputPassThru(13), inputWorking(14), outputWorking(15), inputProtected(16), outputProtected(17), inputRaman(18), outputRaman(19), com(20), ead(21), ad(22) } | current | This value indicates the rule that assumes the optical port. Valid values are - inputLine(1) : this is an input LINE port outputLine(2) : this is an output LINE port inputCom(3) : this is an input COM port outputCom(4) … |
| OpticalPowerInDbm | Integer32 ( -400..250 | -1000 ) | current | An integer value that gives the optical power level in 1/10ths of dBm. Example: The value -300 represents a power level of -30.0 dBm. The distinguished value of '-1000' indicates that the object has not yet been initial… |
| OpticalWavelength | INTEGER { unknown(1), wv1529d55(3), wv1529d94(4), wv1530d33(5), wv1530d72(7), wv1531d12(10), wv1531d51(12), wv1531d90(15), wv1532d29(17), wv1532d68(20), wv1533d07(22), wv1533d47(23), wv1533d86(24), wv1534d25(25), wv1534d64(27), wv1535d04(30), wv1535d43(32), wv1535d82(35), wv1536d22(37), wv1536d61(40), wv1537d00(42), wv1537d40(43), wv1537d79(44), wv1538d19(45), wv1538d58(47), wv1538d98(50), wv1539d37(52), wv1539d77(55), wv1540d16(57), wv1540d56(60), wv1540d95(62), wv1541d35(63), wv1541d75(64), wv1542d14(65), wv1470(66), wv1542d54(67), wv1510(68), wv1590(69), wv1542d94(70), wv850(71), wv1543d33(72), wv1310(73), wv1550(74), wv1543d73(75), wv1490(76), wv1544d13(77), wv1530(78), wv1570(79), wv1544d53(80), wv1610(81), wv1544d92(82), wv1545d32(83), wv1545d72(84), wv1546d12(85), wv1546d52(87), wv1546d92(90), wv1547d32(92), wv1547d72(95), wv1548d11(97), wv1548d51(100), wv1548d91(102), wv1549d32(103), wv1549d72(104), wv1550d12(105), wv1550d52(107), wv1550d92(110), wv1551d32(112), wv1551d72(115), wv1552d12(117), wv1552d52(120), wv1552d93(122), wv1553d33(123), wv1553d73(124), wv1554d13(125), wv1554d54(127), wv1554d94(130), wv1555d34(132), wv1555d75(135), wv1556d15(137), wv1556d55(140), wv1556d96(142), wv1557d36(143), wv1557d77(144), wv1558d17(145), wv1558d58(147), wv1558d98(150), wv1559d39(152), wv1559d79(155), wv1560d20(157), wv1560d61(160), wv1561d01(162), wv1561d42(164), wv1561d83(166), wv1570d83(168), wv1571d24(170), wv1571d65(172), wv1572d06(174), wv1572d48(176), wv1572d89(178), wv1573d30(180), wv1573d71(182), wv1574d13(184), wv1574d54(186), wv1574d95(188), wv1575d37(190), wv1575d78(192), wv1576d20(194), wv1576d61(196), wv1577d03(198), wv1577d44(200), wv1577d86(205), wv1578d27(210), wv1578d69(215), wv1579d10(220), wv1579d52(225), wv1579d93(230), wv1580d35(235), wv1580d77(240), wv1581d18(245), wv1581d60(250), wv1582d02(255), wv1582d44(260), wv1582d85(265), wv1583d27(270), wv1583d69(275), wv1584d11(280), wv1584d53(285), wv1584d95(290), wv1585d36(295), wv1585d78(300), wv1586d20(305), wv1586d62(310), wv1587d04(315), wv1587d46(320), wv1587d88(325), wv1588d30(330), wv1588d73(335), wv1589d15(340), wv1589d57(345), wv1589d99(350), wv1590d41(355), wv1590d83(360), wv1591d26(365), wv1591d68(370), wv1592d10(375), wv1592d52(380), wv1592d95(385), wv1593d37(390), wv1593d79(395), wv1594d22(400), wv1594d64(405), wv1595d06(410), wv1595d49(415), wv1595d91(420), wv1596d34(425), wv1596d76(430), wv1597d19(435), wv1597d62(440), wv1598d04(445), wv1598d47(450), wv1598d89(455), wv1599d32(460), wv1599d75(465), wv1600d17(470), wv1600d60(475), wv1601d03(480), wv1601d46(485), wv1601d88(490), wv1602d31(500), wv1602d74(505), wv1603d17(510), wv1603d60(515), wv1604d03(520), firsttunablewv(530), wv1528d77(540) } | current | This object allows the management client to configure the wavelength mode of operation to the applicable interfaces. The following wave lengths are supported: wv1529d55 is 1529.55 nm wv1529d94 is 1529.94 nm wv1530d33 is… |
| ProtocolType | INTEGER { other(1), unknown(2), tenGigEth(4), fibreChOrOneGigEth(5), unframed(7), sonet(8), sdh(9), sysplexIscCompatibility(10), sysplexIscPeer(11), sysplexTimerEtr(12), sysplexTimerClo(13), fastEthernet(14), fddi(15), eightGfc(16), oc768(17), otn(18) } | current | An integer value that identifies the protocol used across an interface. |
| RingDirection | INTEGER { westEast(1), eastWest(2) } | current | This value indicates the type of directionality in the ring. The directionality is meaning the facing side of the port that is connected to fiber. Valid values are - westEast(1) : the port is facing to west side, contin… |
| SideIdentifier | INTEGER { unknownSide(0), sideA(1), sideB(2), sideC(3), sideD(4), sideE(5), sideF(6), sideG(7), sideH(8), sideI(9), sideJ(10), sideK(11), sideL(12), sideM(13), sideN(14), sideO(15), sideP(16), sideQ(17), sideR(18), sideS(19), sideT(20) } | current | This value indicates the side in the ring/mesh node e.g. the facing side associated to on optical interface within an up to 8 deg mesh node. Valid values are - unknownSide(0) sideA(1) sideB(2) sideC(3) sideD(4) sideE(5)… |
| TDCUCompensation | INTEGER { psnmNotApplicable(-1), psnm0(0), psnmFineMinus45(1), psnmFineMinus90(2), psnmFineMinus135(3), psnmFineMinus180(4), psnmFineMinus225(5), psnmFineMinus270(6), psnmFineMinus315(7), psnmFineMinus360(8), psnmFineMinus405(9), psnmFineMinus450(10), psnmFineMinus495(11), psnmFineMinus540(12), psnmFineMinus585(13), psnmFineMinus630(14), psnmFineMinus675(15), psnmCoarseMinus110(16), psnmCoarseMinus220(17), psnmCoarseMinus330(18), psnmCoarseMinus440(19), psnmCoarseMinus550(20), psnmCoarseMinus660(21), psnmCoarseMinus770(22), psnmCoarseMinus880(23), psnmCoarseMinus990(24), psnmCoarseMinus1100(25), psnmCoarseMinus1210(26), psnmCoarseMinus1320(27), psnmCoarseMinus1430(28), psnmCoarseMinus1540(29), psnmCoarseMinus1650(30) } | current | Enumeration of the possible fine TDCU compensation values 0 ps/nm -45 ps/nm -90 ps/nm -135 ps/nm -180 ps/nm -225 ps/nm -270 ps/nm -315 ps/nm -360 ps/nm -405 ps/nm -450 ps/nm -495 ps/nm -540 ps/nm -585 ps/nm -630 ps/nm -… |