CHARACTER-MIB
48 objects
The MIB module for character stream devices.
Imported Objects
| IF-MIB | InterfaceIndex |
| RFC1213-MIB | mib-2 transmission |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | AutonomousType InstancePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.19 | Identitychar | The MIB module for character stream devices. | ||
| 1.3.6.1.2.1.19.1 | ScalarcharNumber | read-only | current | The number of entries in charPortTable, regardless of their current state. |
| 1.3.6.1.2.1.19.2 | TablecharPortTable | not-accessible | current | A list of port entries. The number of entries is given by the value of charNumber. |
| 1.3.6.1.2.1.19.2.1 | RowcharPortEntry | not-accessible | current | Status and parameter values for a character port. |
| 1.3.6.1.2.1.19.2.1.1 | ColumncharPortIndex | read-only | current | A unique value for each character port, perhaps corresponding to the same value of ifIndex when the character port is associated with a hardware port represent… |
| 1.3.6.1.2.1.19.2.1.2 | ColumncharPortName | read-write | current | An administratively assigned name for the port, typically with some local significance. |
| 1.3.6.1.2.1.19.2.1.3 | ColumncharPortType | read-only | current | The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not. |
| 1.3.6.1.2.1.19.2.1.5 | ColumncharPortReset | read-write | current | A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-reque… |
| 1.3.6.1.2.1.19.2.1.6 | ColumncharPortAdminStatus | read-write | current | The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indica… |
| 1.3.6.1.2.1.19.2.1.7 | ColumncharPortOperStatus | read-only | current | The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for adminis… |
| 1.3.6.1.2.1.19.2.1.8 | ColumncharPortLastChange | read-only | current | The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the l… |
| 1.3.6.1.2.1.19.2.1.9 | ColumncharPortInFlowType | read-write | deprecated | The port's type of input flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON an… |
| 1.3.6.1.2.1.19.2.1.10 | ColumncharPortOutFlowType | read-write | deprecated | The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON a… |
| 1.3.6.1.2.1.19.2.1.11 | ColumncharPortInFlowState | read-only | current | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicate… |
| 1.3.6.1.2.1.19.2.1.12 | ColumncharPortOutFlowState | read-only | current | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicat… |
| 1.3.6.1.2.1.19.2.1.13 | ColumncharPortInCharacters | read-only | current | Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintena… |
| 1.3.6.1.2.1.19.2.1.14 | ColumncharPortOutCharacters | read-only | current | Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenan… |
| 1.3.6.1.2.1.19.2.1.15 | ColumncharPortAdminOrigin | read-write | current | The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session… |
| 1.3.6.1.2.1.19.2.1.16 | ColumncharPortSessionMaximum | read-write | current | The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessi… |
| 1.3.6.1.2.1.19.2.1.17 | ColumncharPortSessionNumber | read-only | current | The number of open sessions on the port that are in the connecting, connected, or disconnecting state. |
| 1.3.6.1.2.1.19.2.1.18 | ColumncharPortSessionIndex | read-only | current | The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero. |
| 1.3.6.1.2.1.19.2.1.19 | ColumncharPortInFlowTypes | read-write | current | The port's types of input flow control at the software level. Hardware-level flow control is independently controlled by the appropriate hardware-level MIB. A … |
| 1.3.6.1.2.1.19.2.1.20 | ColumncharPortOutFlowTypes | read-write | current | The port's types of output flow control at the software level. Hardware-level flow control is independently controlled by the appropriate hardware-level MIB. A… |
| 1.3.6.1.2.1.19.2.1.21 | ColumncharPortLowerIfIndex | read-only | current | The ifIndex value of the lower level hardware supporting this character port, zero if none. |
| 1.3.6.1.2.1.19.3 | TablecharSessTable | not-accessible | current | A list of port session entries. |
| 1.3.6.1.2.1.19.3.1 | RowcharSessEntry | not-accessible | current | Status and parameter values for a character port session. |
| 1.3.6.1.2.1.19.3.1.1 | ColumncharSessPortIndex | read-only | current | The value of charPortIndex for the port to which this session belongs. |
| 1.3.6.1.2.1.19.3.1.2 | ColumncharSessIndex | read-only | current | The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused … |
| 1.3.6.1.2.1.19.3.1.3 | ColumncharSessKill | read-write | current | A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'exec… |
| 1.3.6.1.2.1.19.3.1.4 | ColumncharSessState | read-only | current | The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. '… |
| 1.3.6.1.2.1.19.3.1.5 | ColumncharSessProtocol | read-only | current | The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. Howeve… |
| 1.3.6.1.2.1.19.3.1.6 | ColumncharSessOperOrigin | read-only | current | The session's source of establishment. |
| 1.3.6.1.2.1.19.3.1.7 | ColumncharSessInCharacters | read-only | current | This session's subset of charPortInCharacters. |
| 1.3.6.1.2.1.19.3.1.8 | ColumncharSessOutCharacters | read-only | current | This session's subset of charPortOutCharacters. |
| 1.3.6.1.2.1.19.3.1.10 | ColumncharSessStartTime | read-only | current | The value of sysUpTime in MIB-2 when the session entered connecting state. |
| 1.3.6.1.2.1.19.4 | NodewellKnownProtocols | |||
| 1.3.6.1.2.1.19.4.1 | NodeprotocolOther | |||
| 1.3.6.1.2.1.19.4.2 | NodeprotocolTelnet | |||
| 1.3.6.1.2.1.19.4.3 | NodeprotocolRlogin | |||
| 1.3.6.1.2.1.19.4.4 | NodeprotocolLat | |||
| 1.3.6.1.2.1.19.4.5 | NodeprotocolX29 | |||
| 1.3.6.1.2.1.19.4.6 | NodeprotocolVtp | |||
| 1.3.6.1.2.1.19.5 | NodecharConformance | |||
| 1.3.6.1.2.1.19.5.1 | NodecharGroups | |||
| 1.3.6.1.2.1.19.5.1.1 | GroupcharGroup | current | A collection of objects providing information applicable to all Character interfaces. | |
| 1.3.6.1.2.1.19.5.2 | NodecharCompliances | |||
| 1.3.6.1.2.1.19.5.2.1 | CompliancecharCompliance | current | The compliance statement for SNMPv2 entities which have Character hardware interfaces. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortIndex | Integer32 | current | A unique value, greater than zero, for each character port in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must remain constant at … |