CHECKPOINT-MIB
1520 objects
Check Point MIB See the most common OIDs, with detailed descriptions, in the SNMP Best Practices Guide - sk98552 (https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk98552)
Imported Objects
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2620 | Identitycheckpoint | Check Point MIB See the most common OIDs, with detailed descriptions, in the SNMP Best Practices Guide - sk98552 (https://supportcenter.checkpoint.com/supportc… | ||
| 1.3.6.1.4.1.2620.1 | Nodeproducts | |||
| 1.3.6.1.4.1.2620.1.1 | Nodefw | |||
| 1.3.6.1.4.1.2620.1.1.0 | NodefwTrapPrefix | |||
| 1.3.6.1.4.1.2620.1.1.0.1 | NotificationfwTrap | current | FireWall-1 SNMP trap | |
| 1.3.6.1.4.1.2620.1.1.1 | ScalarfwModuleState | read-only | current | The state of the fw module |
| 1.3.6.1.4.1.2620.1.1.2 | ScalarfwFilterName | read-only | current | The name of the loaded filter |
| 1.3.6.1.4.1.2620.1.1.3 | ScalarfwFilterDate | read-only | current | Install time |
| 1.3.6.1.4.1.2620.1.1.4 | ScalarfwAccepted | read-only | current | The number of accepted packets. |
| 1.3.6.1.4.1.2620.1.1.5 | ScalarfwRejected | read-only | current | The number of rejected packets. |
| 1.3.6.1.4.1.2620.1.1.6 | ScalarfwDropped | read-only | current | The number of dropped packets. |
| 1.3.6.1.4.1.2620.1.1.7 | ScalarfwLogged | read-only | current | The number of logged packets. |
| 1.3.6.1.4.1.2620.1.1.8 | ScalarfwMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.1.9 | ScalarfwMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.1.10 | ScalarfwProduct | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.1.11 | ScalarfwEvent | read-only | current | A string containing the last snmp trap sent via fw |
| 1.3.6.1.4.1.2620.1.1.12 | ScalarfwSICTrustState | read-only | current | SIC Trust State : Possible values include: Not initialized 0 Initialized but not established 1 Established 2 Error 3 Unknown 4 |
| 1.3.6.1.4.1.2620.1.1.21 | ScalarfwProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.1.22 | ScalarfwVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.1.23 | ScalarfwVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.1.24 | ScalarfwKernelBuild | read-only | current | Kernel build num |
| 1.3.6.1.4.1.2620.1.1.25 | NodefwPolicyStat | |||
| 1.3.6.1.4.1.2620.1.1.25.1 | ScalarfwPolicyName | read-only | current | Policy Name |
| 1.3.6.1.4.1.2620.1.1.25.2 | ScalarfwInstallTime | read-only | current | Policy install time |
| 1.3.6.1.4.1.2620.1.1.25.3 | ScalarfwNumConn | read-only | current | Number of connections |
| 1.3.6.1.4.1.2620.1.1.25.4 | ScalarfwPeakNumConn | read-only | current | Peak number of connections |
| 1.3.6.1.4.1.2620.1.1.25.5 | TablefwIfTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1 | RowfwIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.1 | ColumnfwIfIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.2 | ColumnfwIfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.5 | ColumnfwAcceptPcktsIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.6 | ColumnfwAcceptPcktsOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.7 | ColumnfwAcceptBytesIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.8 | ColumnfwAcceptBytesOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.9 | ColumnfwDropPcktsIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.10 | ColumnfwDropPcktsOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.11 | ColumnfwRejectPcktsIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.12 | ColumnfwRejectPcktsOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.13 | ColumnfwLogIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.5.1.14 | ColumnfwLogOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.25.6 | ScalarfwPacketsRate | read-only | current | packets rate |
| 1.3.6.1.4.1.2620.1.1.25.8 | ScalarfwAcceptedBytesTotalRate | read-only | current | bytes thruput |
| 1.3.6.1.4.1.2620.1.1.25.9 | ScalarfwDroppedBytesTotalRate | read-only | current | dropped bytes rate |
| 1.3.6.1.4.1.2620.1.1.25.10 | ScalarfwConnTableLimit | read-only | current | Connection table limit |
| 1.3.6.1.4.1.2620.1.1.25.16 | ScalarfwDroppedTotalRate | read-only | current | dropped packets rate |
| 1.3.6.1.4.1.2620.1.1.26 | NodefwPerfStat | |||
| 1.3.6.1.4.1.2620.1.1.26.1 | NodefwHmem | |||
| 1.3.6.1.4.1.2620.1.1.26.1.1 | ScalarfwHmem-block-size | read-only | current | hmem - block size |
| 1.3.6.1.4.1.2620.1.1.26.1.2 | ScalarfwHmem-requested-bytes | read-only | current | hmem - requested bytes |
| 1.3.6.1.4.1.2620.1.1.26.1.3 | ScalarfwHmem-initial-allocated-bytes | read-only | current | hmem - initial allocated bytes |
| 1.3.6.1.4.1.2620.1.1.26.1.4 | ScalarfwHmem-initial-allocated-blocks | read-only | current | hmem - initial allocated blocks |
| 1.3.6.1.4.1.2620.1.1.26.1.5 | ScalarfwHmem-initial-allocated-pools | read-only | current | hmem - initial allocated pools |
| 1.3.6.1.4.1.2620.1.1.26.1.6 | ScalarfwHmem-current-allocated-bytes | read-only | current | hmem - current allocated bytes |
| 1.3.6.1.4.1.2620.1.1.26.1.7 | ScalarfwHmem-current-allocated-blocks | read-only | current | hmem - current allocated blocks |
| 1.3.6.1.4.1.2620.1.1.26.1.8 | ScalarfwHmem-current-allocated-pools | read-only | current | hmem - current allocated pools |
| 1.3.6.1.4.1.2620.1.1.26.1.9 | ScalarfwHmem-maximum-bytes | read-only | current | hmem - maximum bytes |
| 1.3.6.1.4.1.2620.1.1.26.1.10 | ScalarfwHmem-maximum-pools | read-only | current | hmem - maximum pools |
| 1.3.6.1.4.1.2620.1.1.26.1.11 | ScalarfwHmem-bytes-used | read-only | current | hmem - bytes used |
| 1.3.6.1.4.1.2620.1.1.26.1.12 | ScalarfwHmem-blocks-used | read-only | current | hmem - blocks used |
| 1.3.6.1.4.1.2620.1.1.26.1.13 | ScalarfwHmem-bytes-unused | read-only | current | hmem - bytes unused |
| 1.3.6.1.4.1.2620.1.1.26.1.14 | ScalarfwHmem-blocks-unused | read-only | current | hmem - blocks unused |
| 1.3.6.1.4.1.2620.1.1.26.1.15 | ScalarfwHmem-bytes-peak | read-only | current | hmem - bytes peak |
| 1.3.6.1.4.1.2620.1.1.26.1.16 | ScalarfwHmem-blocks-peak | read-only | current | hmem - blocks peak |
| 1.3.6.1.4.1.2620.1.1.26.1.17 | ScalarfwHmem-bytes-internal-use | read-only | current | hmem - bytes internal use |
| 1.3.6.1.4.1.2620.1.1.26.1.18 | ScalarfwHmem-number-of-items | read-only | current | hmem - number of items |
| 1.3.6.1.4.1.2620.1.1.26.1.19 | ScalarfwHmem-alloc-operations | read-only | current | hmem - alloc operations |
| 1.3.6.1.4.1.2620.1.1.26.1.20 | ScalarfwHmem-free-operations | read-only | current | hmem - free operations |
| 1.3.6.1.4.1.2620.1.1.26.1.21 | ScalarfwHmem-failed-alloc | read-only | current | hmem - failed alloc |
| 1.3.6.1.4.1.2620.1.1.26.1.22 | ScalarfwHmem-failed-free | read-only | current | hmem - failed free |
| 1.3.6.1.4.1.2620.1.1.26.2 | NodefwKmem | |||
| 1.3.6.1.4.1.2620.1.1.26.2.1 | ScalarfwKmem-system-physical-mem | read-only | current | kmem - system physical mem |
| 1.3.6.1.4.1.2620.1.1.26.2.2 | ScalarfwKmem-available-physical-mem | read-only | current | kmem - available physical mem |
| 1.3.6.1.4.1.2620.1.1.26.2.3 | ScalarfwKmem-aix-heap-size | read-only | current | kmem - aix heap size |
| 1.3.6.1.4.1.2620.1.1.26.2.4 | ScalarfwKmem-bytes-used | read-only | current | kmem - bytes used |
| 1.3.6.1.4.1.2620.1.1.26.2.5 | ScalarfwKmem-blocking-bytes-used | read-only | current | kmem - blocking bytes used |
| 1.3.6.1.4.1.2620.1.1.26.2.6 | ScalarfwKmem-non-blocking-bytes-used | read-only | current | kmem - non blocking bytes used |
| 1.3.6.1.4.1.2620.1.1.26.2.7 | ScalarfwKmem-bytes-unused | read-only | current | kmem - bytes unused |
| 1.3.6.1.4.1.2620.1.1.26.2.8 | ScalarfwKmem-bytes-peak | read-only | current | kmem - bytes peak |
| 1.3.6.1.4.1.2620.1.1.26.2.9 | ScalarfwKmem-blocking-bytes-peak | read-only | current | kmem - blocking bytes peak |
| 1.3.6.1.4.1.2620.1.1.26.2.10 | ScalarfwKmem-non-blocking-bytes-peak | read-only | current | kmem - non blocking bytes peak |
| 1.3.6.1.4.1.2620.1.1.26.2.11 | ScalarfwKmem-bytes-internal-use | read-only | current | kmem - bytes internal use |
| 1.3.6.1.4.1.2620.1.1.26.2.12 | ScalarfwKmem-number-of-items | read-only | current | kmem - number of items |
| 1.3.6.1.4.1.2620.1.1.26.2.13 | ScalarfwKmem-alloc-operations | read-only | current | kmem - alloc operations |
| 1.3.6.1.4.1.2620.1.1.26.2.14 | ScalarfwKmem-free-operations | read-only | current | kmem - free operations |
| 1.3.6.1.4.1.2620.1.1.26.2.15 | ScalarfwKmem-failed-alloc | read-only | current | kmem - failed alloc |
| 1.3.6.1.4.1.2620.1.1.26.2.16 | ScalarfwKmem-failed-free | read-only | current | kmem - failed free |
| 1.3.6.1.4.1.2620.1.1.26.3 | NodefwInspect | |||
| 1.3.6.1.4.1.2620.1.1.26.3.1 | ScalarfwInspect-packets | read-only | current | inspect - packets |
| 1.3.6.1.4.1.2620.1.1.26.3.2 | ScalarfwInspect-operations | read-only | current | inspect - operations |
| 1.3.6.1.4.1.2620.1.1.26.3.3 | ScalarfwInspect-lookups | read-only | current | inspect - lookups |
| 1.3.6.1.4.1.2620.1.1.26.3.4 | ScalarfwInspect-record | read-only | current | inspect - record |
| 1.3.6.1.4.1.2620.1.1.26.3.5 | ScalarfwInspect-extract | read-only | current | inspect - extract |
| 1.3.6.1.4.1.2620.1.1.26.4 | NodefwCookies | |||
| 1.3.6.1.4.1.2620.1.1.26.4.1 | ScalarfwCookies-total | read-only | current | cookies - total |
| 1.3.6.1.4.1.2620.1.1.26.4.2 | ScalarfwCookies-allocfwCookies-total | read-only | current | cookies - alloc |
| 1.3.6.1.4.1.2620.1.1.26.4.3 | ScalarfwCookies-freefwCookies-total | read-only | current | cookies - free |
| 1.3.6.1.4.1.2620.1.1.26.4.4 | ScalarfwCookies-dupfwCookies-total | read-only | current | cookies - dup |
| 1.3.6.1.4.1.2620.1.1.26.4.5 | ScalarfwCookies-getfwCookies-total | read-only | current | cookies - get |
| 1.3.6.1.4.1.2620.1.1.26.4.6 | ScalarfwCookies-putfwCookies-total | read-only | current | cookies - put |
| 1.3.6.1.4.1.2620.1.1.26.4.7 | ScalarfwCookies-lenfwCookies-total | read-only | current | cookies - len |
| 1.3.6.1.4.1.2620.1.1.26.5 | NodefwChains | |||
| 1.3.6.1.4.1.2620.1.1.26.5.1 | ScalarfwChains-alloc | read-only | current | chains - alloc |
| 1.3.6.1.4.1.2620.1.1.26.5.2 | ScalarfwChains-free | read-only | current | chains - free |
| 1.3.6.1.4.1.2620.1.1.26.6 | NodefwFragments | |||
| 1.3.6.1.4.1.2620.1.1.26.6.1 | ScalarfwFrag-fragments | read-only | current | fragments - fragments |
| 1.3.6.1.4.1.2620.1.1.26.6.2 | ScalarfwFrag-expired | read-only | current | fragments - expired |
| 1.3.6.1.4.1.2620.1.1.26.6.3 | ScalarfwFrag-packets | read-only | current | fragments - packets |
| 1.3.6.1.4.1.2620.1.1.26.8 | NodefwUfp | |||
| 1.3.6.1.4.1.2620.1.1.26.8.1 | ScalarfwUfpHitRatio | read-only | current | ufp - % hits ratio |
| 1.3.6.1.4.1.2620.1.1.26.8.2 | ScalarfwUfpInspected | read-only | current | ufp - total connections |
| 1.3.6.1.4.1.2620.1.1.26.8.3 | ScalarfwUfpHits | read-only | current | ufp - hits connections |
| 1.3.6.1.4.1.2620.1.1.26.9 | NodefwSS | |||
| 1.3.6.1.4.1.2620.1.1.26.9.1 | NodefwSS-http | |||
| 1.3.6.1.4.1.2620.1.1.26.9.1.1 | ScalarfwSS-http-pid | read-only | current | http - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.1.2 | ScalarfwSS-http-proto | read-only | current | http - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.1.3 | ScalarfwSS-http-port | read-only | current | http - port |
| 1.3.6.1.4.1.2620.1.1.26.9.1.4 | ScalarfwSS-http-logical-port | read-only | current | http - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.1.5 | ScalarfwSS-http-max-avail-socket | read-only | current | http - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.1.6 | ScalarfwSS-http-socket-in-use-max | read-only | current | http - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.7 | ScalarfwSS-http-socket-in-use-curr | read-only | current | http - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.8 | ScalarfwSS-http-socket-in-use-count | read-only | current | http - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.9 | ScalarfwSS-http-sess-max | read-only | current | http - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.10 | ScalarfwSS-http-sess-curr | read-only | current | http - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.11 | ScalarfwSS-http-sess-count | read-only | current | http - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.12 | ScalarfwSS-http-auth-sess-max | read-only | current | http - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.13 | ScalarfwSS-http-auth-sess-curr | read-only | current | http - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.14 | ScalarfwSS-http-auth-sess-count | read-only | current | http - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.15 | ScalarfwSS-http-accepted-sess | read-only | current | http - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.1.16 | ScalarfwSS-http-rejected-sess | read-only | current | http - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.1.17 | ScalarfwSS-http-auth-failures | read-only | current | http - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.1.18 | ScalarfwSS-http-ops-cvp-sess-max | read-only | current | http - opsec cvp session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.19 | ScalarfwSS-http-ops-cvp-sess-curr | read-only | current | http - opsec cvp session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.20 | ScalarfwSS-http-ops-cvp-sess-count | read-only | current | http - opsec cvp session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.21 | ScalarfwSS-http-ops-cvp-rej-sess | read-only | current | http - opsec cvp rej session |
| 1.3.6.1.4.1.2620.1.1.26.9.1.22 | ScalarfwSS-http-ssl-encryp-sess-max | read-only | current | http - ssl encryp session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.23 | ScalarfwSS-http-ssl-encryp-sess-curr | read-only | current | http - ssl encryp session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.24 | ScalarfwSS-http-ssl-encryp-sess-count | read-only | current | http - ssl encryp session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.25 | ScalarfwSS-http-transp-sess-max | read-only | current | http - transparent session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.26 | ScalarfwSS-http-transp-sess-curr | read-only | current | http - transparent session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.27 | ScalarfwSS-http-transp-sess-count | read-only | current | http - transparent session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.28 | ScalarfwSS-http-proxied-sess-max | read-only | current | http - proxied session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.29 | ScalarfwSS-http-proxied-sess-curr | read-only | current | http - proxied session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.30 | ScalarfwSS-http-proxied-sess-count | read-only | current | http - proxied session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.31 | ScalarfwSS-http-tunneled-sess-max | read-only | current | http - tunneled session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.32 | ScalarfwSS-http-tunneled-sess-curr | read-only | current | http - tunneled session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.33 | ScalarfwSS-http-tunneled-sess-count | read-only | current | http - tunneled session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.34 | ScalarfwSS-http-ftp-sess-max | read-only | current | http - ftp session max |
| 1.3.6.1.4.1.2620.1.1.26.9.1.35 | ScalarfwSS-http-ftp-sess-curr | read-only | current | http - ftp session current |
| 1.3.6.1.4.1.2620.1.1.26.9.1.36 | ScalarfwSS-http-ftp-sess-count | read-only | current | http - ftp session count |
| 1.3.6.1.4.1.2620.1.1.26.9.1.37 | ScalarfwSS-http-time-stamp | read-only | current | http - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.1.38 | ScalarfwSS-http-is-alive | read-only | current | http - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.1.39 | ScalarfwSS-http-blocked-cnt | read-only | current | count of HTTP items blocked, being classified as 'infected' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.1.40 | ScalarfwSS-http-blocked-total | read-only | current | sum of all the counts of the previous OID (fwss-http-blocked-cnt) |
| 1.3.6.1.4.1.2620.1.1.26.9.1.41 | ScalarfwSS-http-scanned-total | read-only | current | sum of all the counts of 'blocked' (infected) and 'passed' items |
| 1.3.6.1.4.1.2620.1.1.26.9.1.42 | ScalarfwSS-http-blocked-by-file-type | read-only | current | count of HTTP items blocked by 'file type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.43 | ScalarfwSS-http-blocked-by-size-limit | read-only | current | count of HTTP items blocked by 'size limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.44 | ScalarfwSS-http-blocked-by-archive-limit | read-only | current | count of HTTP items blocked by 'archive limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.45 | ScalarfwSS-http-blocked-by-internal-error | read-only | current | count of HTTP items blocked because of 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.46 | ScalarfwSS-http-passed-cnt | read-only | current | count of HTTP items passed, being classified as 'safe' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.1.47 | ScalarfwSS-http-passed-by-file-type | read-only | current | count of HTTP items allowed (without AV scan) by 'File Type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.48 | ScalarfwSS-http-passed-by-size-limit | read-only | current | count of HTTP items allowed (without AV scan) by 'Size Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.49 | ScalarfwSS-http-passed-by-archive-limit | read-only | current | count of HTTP items allowed (without AV scan) by 'Archive Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.50 | ScalarfwSS-http-passed-by-internal-error | read-only | current | count of HTTP items allowed (without AV scan) by 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.51 | ScalarfwSS-http-passed-total | read-only | current | sum of all the above 'passed' counts - OIDs .46 to .50 |
| 1.3.6.1.4.1.2620.1.1.26.9.1.52 | ScalarfwSS-http-blocked-by-AV-settings | read-only | current | count of HTTP items rejected by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane… |
| 1.3.6.1.4.1.2620.1.1.26.9.1.53 | ScalarfwSS-http-passed-by-AV-settings | read-only | current | count of HTTP items allowed by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane … |
| 1.3.6.1.4.1.2620.1.1.26.9.1.54 | ScalarfwSS-http-blocked-by-URL-filter-category | read-only | current | count of URLs blocked by 'Web Filtering Policy' in 'Content Inspection' tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.1.55 | ScalarfwSS-http-blocked-by-URL-block-list | read-only | current | count of URLs blocked by 'Blocked URLs/IPs' in 'Content Inspection' tab in SmartDashboard (overriding 'Web Filtering Policy'). |
| 1.3.6.1.4.1.2620.1.1.26.9.1.56 | ScalarfwSS-http-passed-by-URL-allow-list | read-only | current | count of Allowed by 'allowed URLs/IPs' in 'Content Inspection' tab in SmartDashboard (overriding 'Web Filtering Policy') |
| 1.3.6.1.4.1.2620.1.1.26.9.1.57 | ScalarfwSS-http-passed-by-URL-filter-category | read-only | current | count of URLs allowed by 'Web Filtering Policy' in 'Content Inspection' tab in SmartDashboard. |
| 1.3.6.1.4.1.2620.1.1.26.9.2 | NodefwSS-ftp | |||
| 1.3.6.1.4.1.2620.1.1.26.9.2.1 | ScalarfwSS-ftp-pid | read-only | current | ftp - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.2.2 | ScalarfwSS-ftp-proto | read-only | current | ftp - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.2.3 | ScalarfwSS-ftp-port | read-only | current | ftp - port |
| 1.3.6.1.4.1.2620.1.1.26.9.2.4 | ScalarfwSS-ftp-logical-port | read-only | current | ftp - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.2.5 | ScalarfwSS-ftp-max-avail-socket | read-only | current | ftp - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.2.6 | ScalarfwSS-ftp-socket-in-use-max | read-only | current | ftp - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.2.7 | ScalarfwSS-ftp-socket-in-use-curr | read-only | current | ftp - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.2.8 | ScalarfwSS-ftp-socket-in-use-count | read-only | current | ftp - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.2.9 | ScalarfwSS-ftp-sess-max | read-only | current | ftp - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.2.10 | ScalarfwSS-ftp-sess-curr | read-only | current | ftp - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.2.11 | ScalarfwSS-ftp-sess-count | read-only | current | ftp - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.2.12 | ScalarfwSS-ftp-auth-sess-max | read-only | current | ftp - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.2.13 | ScalarfwSS-ftp-auth-sess-curr | read-only | current | ftp - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.2.14 | ScalarfwSS-ftp-auth-sess-count | read-only | current | ftp - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.2.15 | ScalarfwSS-ftp-accepted-sess | read-only | current | ftp - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.2.16 | ScalarfwSS-ftp-rejected-sess | read-only | current | ftp - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.2.17 | ScalarfwSS-ftp-auth-failures | read-only | current | ftp - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.2.18 | ScalarfwSS-ftp-ops-cvp-sess-max | read-only | current | ftp - opsec cvp session max |
| 1.3.6.1.4.1.2620.1.1.26.9.2.19 | ScalarfwSS-ftp-ops-cvp-sess-curr | read-only | current | ftp - opsec cvp session current |
| 1.3.6.1.4.1.2620.1.1.26.9.2.20 | ScalarfwSS-ftp-ops-cvp-sess-count | read-only | current | ftp - opsec cvp session count |
| 1.3.6.1.4.1.2620.1.1.26.9.2.21 | ScalarfwSS-ftp-ops-cvp-rej-sess | read-only | current | ftp - opsec cvp rej session |
| 1.3.6.1.4.1.2620.1.1.26.9.2.22 | ScalarfwSS-ftp-time-stamp | read-only | current | ftp - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.2.23 | ScalarfwSS-ftp-is-alive | read-only | current | ftp - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.2.24 | ScalarfwSS-ftp-blocked-cnt | read-only | current | count of ftp items blocked, being classified as 'infected' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.2.25 | ScalarfwSS-ftp-blocked-total | read-only | current | sum of all the counts of the previous OID (fwss-ftp-blocked-cnt) |
| 1.3.6.1.4.1.2620.1.1.26.9.2.26 | ScalarfwSS-ftp-scanned-total | read-only | current | sum of all the counts of 'blocked' (infected) and 'passed' items |
| 1.3.6.1.4.1.2620.1.1.26.9.2.27 | ScalarfwSS-ftp-blocked-by-file-type | read-only | current | count of ftp items blocked by 'file type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.28 | ScalarfwSS-ftp-blocked-by-size-limit | read-only | current | count of ftp items blocked by 'size limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.29 | ScalarfwSS-ftp-blocked-by-archive-limit | read-only | current | count of ftp items blocked by 'archive limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.30 | ScalarfwSS-ftp-blocked-by-internal-error | read-only | current | count of ftp items blocked because of 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.31 | ScalarfwSS-ftp-passed-cnt | read-only | current | count of ftp items passed, being classified as 'safe' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.2.32 | ScalarfwSS-ftp-passed-by-file-type | read-only | current | count of ftp items allowed (without AV scan) by 'File Type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.33 | ScalarfwSS-ftp-passed-by-size-limit | read-only | current | count of ftp items allowed (without AV scan) by 'Size Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.34 | ScalarfwSS-ftp-passed-by-archive-limit | read-only | current | count of ftp items allowed (without AV scan) by 'Archive Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.35 | ScalarfwSS-ftp-passed-by-internal-error | read-only | current | count of ftp items allowed (without AV scan) by 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.2.36 | ScalarfwSS-ftp-passed-total | read-only | current | sum of all the above 'passed' counts - OIDs .31 to .35 |
| 1.3.6.1.4.1.2620.1.1.26.9.2.37 | ScalarfwSS-ftp-blocked-by-AV-settings | read-only | current | count of ftp items rejected by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane … |
| 1.3.6.1.4.1.2620.1.1.26.9.2.38 | ScalarfwSS-ftp-passed-by-AV-settings | read-only | current | count of ftp items allowed by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane i… |
| 1.3.6.1.4.1.2620.1.1.26.9.3 | NodefwSS-telnet | |||
| 1.3.6.1.4.1.2620.1.1.26.9.3.1 | ScalarfwSS-telnet-pid | read-only | current | telnet - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.3.2 | ScalarfwSS-telnet-proto | read-only | current | telnet - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.3.3 | ScalarfwSS-telnet-port | read-only | current | telnet - port |
| 1.3.6.1.4.1.2620.1.1.26.9.3.4 | ScalarfwSS-telnet-logical-port | read-only | current | telnet - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.3.5 | ScalarfwSS-telnet-max-avail-socket | read-only | current | telnet - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.3.6 | ScalarfwSS-telnet-socket-in-use-max | read-only | current | telnet - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.3.7 | ScalarfwSS-telnet-socket-in-use-curr | read-only | current | telnet - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.3.8 | ScalarfwSS-telnet-socket-in-use-count | read-only | current | telnet - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.3.9 | ScalarfwSS-telnet-sess-max | read-only | current | telnet - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.3.10 | ScalarfwSS-telnet-sess-curr | read-only | current | telnet - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.3.11 | ScalarfwSS-telnet-sess-count | read-only | current | telnet - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.3.12 | ScalarfwSS-telnet-auth-sess-max | read-only | current | telnet - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.3.13 | ScalarfwSS-telnet-auth-sess-curr | read-only | current | telnet - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.3.14 | ScalarfwSS-telnet-auth-sess-count | read-only | current | telnet - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.3.15 | ScalarfwSS-telnet-accepted-sess | read-only | current | telnet - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.3.16 | ScalarfwSS-telnet-rejected-sess | read-only | current | telnet - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.3.17 | ScalarfwSS-telnet-auth-failures | read-only | current | telnet - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.3.18 | ScalarfwSS-telnet-time-stamp | read-only | current | telnet - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.3.19 | ScalarfwSS-telnet-is-alive | read-only | current | telnet - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.4 | NodefwSS-rlogin | |||
| 1.3.6.1.4.1.2620.1.1.26.9.4.1 | ScalarfwSS-rlogin-pid | read-only | current | rlogin - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.4.2 | ScalarfwSS-rlogin-proto | read-only | current | rlogin - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.4.3 | ScalarfwSS-rlogin-port | read-only | current | rlogin - port |
| 1.3.6.1.4.1.2620.1.1.26.9.4.4 | ScalarfwSS-rlogin-logical-port | read-only | current | rlogin - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.4.5 | ScalarfwSS-rlogin-max-avail-socket | read-only | current | rlogin - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.4.6 | ScalarfwSS-rlogin-socket-in-use-max | read-only | current | rlogin - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.4.7 | ScalarfwSS-rlogin-socket-in-use-curr | read-only | current | rlogin - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.4.8 | ScalarfwSS-rlogin-socket-in-use-count | read-only | current | rlogin - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.4.9 | ScalarfwSS-rlogin-sess-max | read-only | current | rlogin - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.4.10 | ScalarfwSS-rlogin-sess-curr | read-only | current | rlogin - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.4.11 | ScalarfwSS-rlogin-sess-count | read-only | current | rlogin - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.4.12 | ScalarfwSS-rlogin-auth-sess-max | read-only | current | rlogin - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.4.13 | ScalarfwSS-rlogin-auth-sess-curr | read-only | current | rlogin - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.4.14 | ScalarfwSS-rlogin-auth-sess-count | read-only | current | rlogin - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.4.15 | ScalarfwSS-rlogin-accepted-sess | read-only | current | rlogin - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.4.16 | ScalarfwSS-rlogin-rejected-sess | read-only | current | rlogin - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.4.17 | ScalarfwSS-rlogin-auth-failures | read-only | current | rlogin - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.4.18 | ScalarfwSS-rlogin-time-stamp | read-only | current | rlogin - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.4.19 | ScalarfwSS-rlogin-is-alive | read-only | current | rlogin - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.5 | NodefwSS-ufp | |||
| 1.3.6.1.4.1.2620.1.1.26.9.5.1 | ScalarfwSS-ufp-ops-ufp-sess-max | read-only | current | ufp - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.5.2 | ScalarfwSS-ufp-ops-ufp-sess-curr | read-only | current | ufp - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.5.3 | ScalarfwSS-ufp-ops-ufp-sess-count | read-only | current | ufp - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.5.4 | ScalarfwSS-ufp-ops-ufp-rej-sess | read-only | current | ufp - rej session |
| 1.3.6.1.4.1.2620.1.1.26.9.5.5 | ScalarfwSS-ufp-time-stamp | read-only | current | ufp - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.5.6 | ScalarfwSS-ufp-is-alive | read-only | current | ufp - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.6 | NodefwSS-smtp | |||
| 1.3.6.1.4.1.2620.1.1.26.9.6.1 | ScalarfwSS-smtp-pid | read-only | current | smtp - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.6.2 | ScalarfwSS-smtp-proto | read-only | current | smtp - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.6.3 | ScalarfwSS-smtp-port | read-only | current | smtp - port |
| 1.3.6.1.4.1.2620.1.1.26.9.6.4 | ScalarfwSS-smtp-logical-port | read-only | current | smtp - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.6.5 | ScalarfwSS-smtp-max-avail-socket | read-only | current | smtp - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.6.6 | ScalarfwSS-smtp-socket-in-use-max | read-only | current | smtp - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.6.7 | ScalarfwSS-smtp-socket-in-use-curr | read-only | current | smtp - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.6.8 | ScalarfwSS-smtp-socket-in-use-count | read-only | current | smtp - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.6.9 | ScalarfwSS-smtp-sess-max | read-only | current | smtp - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.6.10 | ScalarfwSS-smtp-sess-curr | read-only | current | smtp - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.6.11 | ScalarfwSS-smtp-sess-count | read-only | current | smtp - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.6.12 | ScalarfwSS-smtp-auth-sess-max | read-only | current | smtp - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.6.13 | ScalarfwSS-smtp-auth-sess-curr | read-only | current | smtp - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.6.14 | ScalarfwSS-smtp-auth-sess-count | read-only | current | smtp - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.6.15 | ScalarfwSS-smtp-accepted-sess | read-only | current | smtp - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.6.16 | ScalarfwSS-smtp-rejected-sess | read-only | current | smtp - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.6.17 | ScalarfwSS-smtp-auth-failures | read-only | current | smtp - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.6.18 | ScalarfwSS-smtp-mail-max | read-only | current | smtp - mail max |
| 1.3.6.1.4.1.2620.1.1.26.9.6.19 | ScalarfwSS-smtp-mail-curr | read-only | current | smtp - mail curr |
| 1.3.6.1.4.1.2620.1.1.26.9.6.20 | ScalarfwSS-smtp-mail-count | read-only | current | smtp - mail count |
| 1.3.6.1.4.1.2620.1.1.26.9.6.21 | ScalarfwSS-smtp-outgoing-mail-max | read-only | current | smtp - outgoing mail max |
| 1.3.6.1.4.1.2620.1.1.26.9.6.22 | ScalarfwSS-smtp-outgoing-mail-curr | read-only | current | smtp - outgoing mail curr |
| 1.3.6.1.4.1.2620.1.1.26.9.6.23 | ScalarfwSS-smtp-outgoing-mail-count | read-only | current | smtp - outgoing mail count |
| 1.3.6.1.4.1.2620.1.1.26.9.6.24 | ScalarfwSS-smtp-max-mail-on-conn | read-only | current | smtp - max mail on conn |
| 1.3.6.1.4.1.2620.1.1.26.9.6.25 | ScalarfwSS-smtp-total-mails | read-only | current | smtp - total mails |
| 1.3.6.1.4.1.2620.1.1.26.9.6.26 | ScalarfwSS-smtp-time-stamp | read-only | current | smtp - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.6.27 | ScalarfwSS-smtp-is-alive | read-only | current | smtp - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.6.28 | ScalarfwSS-smtp-blocked-cnt | read-only | current | count of smtp items blocked, being classified as 'infected' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.6.29 | ScalarfwSS-smtp-blocked-total | read-only | current | sum of all the counts of the previous OID (fwss-smtp-blocked-cnt) |
| 1.3.6.1.4.1.2620.1.1.26.9.6.30 | ScalarfwSS-smtp-scanned-total | read-only | current | sum of all the counts of 'blocked' (infected) and 'passed' items |
| 1.3.6.1.4.1.2620.1.1.26.9.6.31 | ScalarfwSS-smtp-blocked-by-file-type | read-only | current | count of smtp items blocked by 'file type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.32 | ScalarfwSS-smtp-blocked-by-size-limit | read-only | current | count of smtp items blocked by 'size limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.33 | ScalarfwSS-smtp-blocked-by-archive-limit | read-only | current | count of smtp items blocked by 'archive limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.34 | ScalarfwSS-smtp-blocked-by-internal-error | read-only | current | count of smtp items blocked because of 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.35 | ScalarfwSS-smtp-passed-cnt | read-only | current | count of smtp items passed, being classified as 'safe' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.6.36 | ScalarfwSS-smtp-passed-by-file-type | read-only | current | count of smtp items allowed (without AV scan) by 'File Type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.37 | ScalarfwSS-smtp-passed-by-size-limit | read-only | current | count of smtp items allowed (without AV scan) by 'Size Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.38 | ScalarfwSS-smtp-passed-by-archive-limit | read-only | current | count of smtp items allowed (without AV scan) by 'Archive Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.39 | ScalarfwSS-smtp-passed-by-internal-error | read-only | current | count of smtp items allowed (without AV scan) by 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.6.40 | ScalarfwSS-smtp-passed-total | read-only | current | sum of all the above 'passed' counts - OIDs .35 to .39 |
| 1.3.6.1.4.1.2620.1.1.26.9.6.41 | ScalarfwSS-smtp-blocked-by-AV-settings | read-only | current | count of smtp items rejected by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane… |
| 1.3.6.1.4.1.2620.1.1.26.9.6.42 | ScalarfwSS-smtp-passed-by-AV-settings | read-only | current | count of smtp items allowed by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane … |
| 1.3.6.1.4.1.2620.1.1.26.9.7 | NodefwSS-POP3 | |||
| 1.3.6.1.4.1.2620.1.1.26.9.7.1 | ScalarfwSS-POP3-pid | read-only | current | POP3 - pid |
| 1.3.6.1.4.1.2620.1.1.26.9.7.2 | ScalarfwSS-POP3-proto | read-only | current | POP3 - proto |
| 1.3.6.1.4.1.2620.1.1.26.9.7.3 | ScalarfwSS-POP3-port | read-only | current | POP3 - port |
| 1.3.6.1.4.1.2620.1.1.26.9.7.4 | ScalarfwSS-POP3-logical-port | read-only | current | POP3 - logical port |
| 1.3.6.1.4.1.2620.1.1.26.9.7.5 | ScalarfwSS-POP3-max-avail-socket | read-only | current | POP3 - max avail socket |
| 1.3.6.1.4.1.2620.1.1.26.9.7.6 | ScalarfwSS-POP3-socket-in-use-max | read-only | current | POP3 - socket in use max |
| 1.3.6.1.4.1.2620.1.1.26.9.7.7 | ScalarfwSS-POP3-socket-in-use-curr | read-only | current | POP3 - socket in use current |
| 1.3.6.1.4.1.2620.1.1.26.9.7.8 | ScalarfwSS-POP3-socket-in-use-count | read-only | current | POP3 - socket in use count |
| 1.3.6.1.4.1.2620.1.1.26.9.7.9 | ScalarfwSS-POP3-sess-max | read-only | current | POP3 - session max |
| 1.3.6.1.4.1.2620.1.1.26.9.7.10 | ScalarfwSS-POP3-sess-curr | read-only | current | POP3 - session current |
| 1.3.6.1.4.1.2620.1.1.26.9.7.11 | ScalarfwSS-POP3-sess-count | read-only | current | POP3 - session count |
| 1.3.6.1.4.1.2620.1.1.26.9.7.12 | ScalarfwSS-POP3-auth-sess-max | read-only | current | POP3 - auth session max |
| 1.3.6.1.4.1.2620.1.1.26.9.7.13 | ScalarfwSS-POP3-auth-sess-curr | read-only | current | POP3 - auth session current |
| 1.3.6.1.4.1.2620.1.1.26.9.7.14 | ScalarfwSS-POP3-auth-sess-count | read-only | current | POP3 - auth session count |
| 1.3.6.1.4.1.2620.1.1.26.9.7.15 | ScalarfwSS-POP3-accepted-sess | read-only | current | POP3 - accepted session |
| 1.3.6.1.4.1.2620.1.1.26.9.7.16 | ScalarfwSS-POP3-rejected-sess | read-only | current | POP3 - rejected session |
| 1.3.6.1.4.1.2620.1.1.26.9.7.17 | ScalarfwSS-POP3-auth-failures | read-only | current | POP3 - auth failures |
| 1.3.6.1.4.1.2620.1.1.26.9.7.18 | ScalarfwSS-POP3-mail-max | read-only | current | POP3 - mail max |
| 1.3.6.1.4.1.2620.1.1.26.9.7.19 | ScalarfwSS-POP3-mail-curr | read-only | current | POP3 - mail curr |
| 1.3.6.1.4.1.2620.1.1.26.9.7.20 | ScalarfwSS-POP3-mail-count | read-only | current | POP3 - mail count |
| 1.3.6.1.4.1.2620.1.1.26.9.7.21 | ScalarfwSS-POP3-outgoing-mail-max | read-only | current | POP3 - outgoing mail max |
| 1.3.6.1.4.1.2620.1.1.26.9.7.22 | ScalarfwSS-POP3-outgoing-mail-curr | read-only | current | POP3 - outgoing mail curr |
| 1.3.6.1.4.1.2620.1.1.26.9.7.23 | ScalarfwSS-POP3-outgoing-mail-count | read-only | current | POP3 - outgoing mail count |
| 1.3.6.1.4.1.2620.1.1.26.9.7.24 | ScalarfwSS-POP3-max-mail-on-conn | read-only | current | POP3 - max mail on conn |
| 1.3.6.1.4.1.2620.1.1.26.9.7.25 | ScalarfwSS-POP3-total-mails | read-only | current | POP3 - total mails |
| 1.3.6.1.4.1.2620.1.1.26.9.7.26 | ScalarfwSS-POP3-time-stamp | read-only | current | POP3 - time stamp |
| 1.3.6.1.4.1.2620.1.1.26.9.7.27 | ScalarfwSS-POP3-is-alive | read-only | current | POP3 - is alive |
| 1.3.6.1.4.1.2620.1.1.26.9.7.28 | ScalarfwSS-POP3-blocked-cnt | read-only | current | count of POP3 items blocked, being classified as 'infected' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.7.29 | ScalarfwSS-POP3-blocked-total | read-only | current | sum of all the counts of the previous OID (fwss-POP3-blocked-cnt) |
| 1.3.6.1.4.1.2620.1.1.26.9.7.30 | ScalarfwSS-POP3-scanned-total | read-only | current | sum of all the counts of 'blocked' (infected) and 'passed' items |
| 1.3.6.1.4.1.2620.1.1.26.9.7.31 | ScalarfwSS-POP3-blocked-by-file-type | read-only | current | count of POP3 items blocked by 'file type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.32 | ScalarfwSS-POP3-blocked-by-size-limit | read-only | current | count of POP3 items blocked by 'size limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.33 | ScalarfwSS-POP3-blocked-by-archive-limit | read-only | current | count of POP3 items blocked by 'archive limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.34 | ScalarfwSS-POP3-blocked-by-internal-error | read-only | current | count of POP3 items blocked because of 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.35 | ScalarfwSS-POP3-passed-cnt | read-only | current | count of POP3 items passed, being classified as 'safe' by Anti Virus |
| 1.3.6.1.4.1.2620.1.1.26.9.7.36 | ScalarfwSS-POP3-passed-by-file-type | read-only | current | count of POP3 items allowed (without AV scan) by 'File Type' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.37 | ScalarfwSS-POP3-passed-by-size-limit | read-only | current | count of POP3 items allowed (without AV scan) by 'Size Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.38 | ScalarfwSS-POP3-passed-by-archive-limit | read-only | current | count of POP3 items allowed (without AV scan) by 'Archive Limit' policy in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.39 | ScalarfwSS-POP3-passed-by-internal-error | read-only | current | count of POP3 items allowed (without AV scan) by 'internal error' in Content Inspection tab in SmartDashboard |
| 1.3.6.1.4.1.2620.1.1.26.9.7.40 | ScalarfwSS-POP3-passed-total | read-only | current | sum of all the above 'passed' counts - OIDs .35 to .39 |
| 1.3.6.1.4.1.2620.1.1.26.9.7.41 | ScalarfwSS-POP3-blocked-by-AV-settings | read-only | current | count of POP3 items rejected by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane… |
| 1.3.6.1.4.1.2620.1.1.26.9.7.42 | ScalarfwSS-POP3-passed-by-AV-settings | read-only | current | count of POP3 items allowed by Anti Virus as either: exceeding size or archive limits, or failed scan due to internal error (configured in the 'settings' pane … |
| 1.3.6.1.4.1.2620.1.1.26.9.10 | NodefwSS-av-total | |||
| 1.3.6.1.4.1.2620.1.1.26.9.10.1 | ScalarfwSS-total-blocked-by-av | read-only | current | total blocked items for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.2 | ScalarfwSS-total-blocked | read-only | current | total blocked items for all policies (filetype,size limit, archive limit,internal error) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.3 | ScalarfwSS-total-scanned | read-only | current | total scanned items for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.4 | ScalarfwSS-total-blocked-by-file-type | read-only | current | total blocked items by 'File Type' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.5 | ScalarfwSS-total-blocked-by-size-limit | read-only | current | total blocked items by 'Size Limit' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.6 | ScalarfwSS-total-blocked-by-archive-limit | read-only | current | total blocked items by 'Archive Limit' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.7 | ScalarfwSS-total-blocked-by-interal-error | read-only | current | total blocked items by 'Internal Error' for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.8 | ScalarfwSS-total-passed-by-av | read-only | current | total passed items for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.9 | ScalarfwSS-total-passed-by-file-type | read-only | current | total passed items by 'File Type' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.10 | ScalarfwSS-total-passed-by-size-limit | read-only | current | total passed items by 'Size Limit' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.11 | ScalarfwSS-total-passed-by-archive-limit | read-only | current | total blocked items by 'Archive Limit' policy for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.12 | ScalarfwSS-total-passed-by-interal-error | read-only | current | total blocked items by 'Internal Error' for all services (HTTP,FTP,POP3,SMTP) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.13 | ScalarfwSS-total-passed | read-only | current | total passed items for all policies (filetype,size limit, archive limit,internal error) |
| 1.3.6.1.4.1.2620.1.1.26.9.10.14 | ScalarfwSS-total-blocked-by-av-settings | read-only | current | total blocked items by AV settings |
| 1.3.6.1.4.1.2620.1.1.26.9.10.15 | ScalarfwSS-total-passed-by-av-settings | read-only | current | total passed items by AV settings |
| 1.3.6.1.4.1.2620.1.1.26.11 | NodefwConnectionsStat | |||
| 1.3.6.1.4.1.2620.1.1.26.11.1 | ScalarfwConnectionsStatConnectionsTcp | read-only | current | tcp connections passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.11.2 | ScalarfwConnectionsStatConnectionsUdp | read-only | current | udp connections passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.11.3 | ScalarfwConnectionsStatConnectionsIcmp | read-only | current | icmp connections passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.11.4 | ScalarfwConnectionsStatConnectionsOther | read-only | current | other connections passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.11.5 | ScalarfwConnectionsStatConnections | read-only | current | total connections passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.11.6 | ScalarfwConnectionsStatConnectionRate | read-only | current | connection rate (per second) passing through the FireWall-1 Module |
| 1.3.6.1.4.1.2620.1.1.26.12 | NodefwHmem64 | |||
| 1.3.6.1.4.1.2620.1.1.26.12.1 | ScalarfwHmem64-block-size | read-only | current | hmem - block size |
| 1.3.6.1.4.1.2620.1.1.26.12.2 | ScalarfwHmem64-requested-bytes | read-only | current | hmem - requested bytes |
| 1.3.6.1.4.1.2620.1.1.26.12.3 | ScalarfwHmem64-initial-allocated-bytes | read-only | current | hmem - initial allocated bytes |
| 1.3.6.1.4.1.2620.1.1.26.12.4 | ScalarfwHmem64-initial-allocated-blocks | read-only | current | hmem - initial allocated blocks |
| 1.3.6.1.4.1.2620.1.1.26.12.5 | ScalarfwHmem64-initial-allocated-pools | read-only | current | hmem - initial allocated pools |
| 1.3.6.1.4.1.2620.1.1.26.12.6 | ScalarfwHmem64-current-allocated-bytes | read-only | current | hmem - current allocated bytes |
| 1.3.6.1.4.1.2620.1.1.26.12.7 | ScalarfwHmem64-current-allocated-blocks | read-only | current | hmem - current allocated blocks |
| 1.3.6.1.4.1.2620.1.1.26.12.8 | ScalarfwHmem64-current-allocated-pools | read-only | current | hmem - current allocated pools |
| 1.3.6.1.4.1.2620.1.1.26.12.9 | ScalarfwHmem64-maximum-bytes | read-only | current | hmem - maximum bytes |
| 1.3.6.1.4.1.2620.1.1.26.12.10 | ScalarfwHmem64-maximum-pools | read-only | current | hmem - maximum pools |
| 1.3.6.1.4.1.2620.1.1.26.12.11 | ScalarfwHmem64-bytes-used | read-only | current | hmem - bytes used |
| 1.3.6.1.4.1.2620.1.1.26.12.12 | ScalarfwHmem64-blocks-used | read-only | current | hmem - blocks used |
| 1.3.6.1.4.1.2620.1.1.26.12.13 | ScalarfwHmem64-bytes-unused | read-only | current | hmem - bytes unused |
| 1.3.6.1.4.1.2620.1.1.26.12.14 | ScalarfwHmem64-blocks-unused | read-only | current | hmem - blocks unused |
| 1.3.6.1.4.1.2620.1.1.26.12.15 | ScalarfwHmem64-bytes-peak | read-only | current | hmem - bytes peak |
| 1.3.6.1.4.1.2620.1.1.26.12.16 | ScalarfwHmem64-blocks-peak | read-only | current | hmem - blocks peak |
| 1.3.6.1.4.1.2620.1.1.26.12.17 | ScalarfwHmem64-bytes-internal-use | read-only | current | hmem - bytes internal use |
| 1.3.6.1.4.1.2620.1.1.26.12.18 | ScalarfwHmem64-number-of-items | read-only | current | hmem - number of items |
| 1.3.6.1.4.1.2620.1.1.26.12.19 | ScalarfwHmem64-alloc-operations | read-only | current | hmem - alloc operations |
| 1.3.6.1.4.1.2620.1.1.26.12.20 | ScalarfwHmem64-free-operations | read-only | current | hmem - free operations |
| 1.3.6.1.4.1.2620.1.1.26.12.21 | ScalarfwHmem64-failed-alloc | read-only | current | hmem - failed alloc |
| 1.3.6.1.4.1.2620.1.1.26.12.22 | ScalarfwHmem64-failed-free | read-only | current | hmem - failed free |
| 1.3.6.1.4.1.2620.1.1.27 | TablefwNetIfTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.27.1 | RowfwNetIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.27.1.1 | ColumnfwNetIfIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.27.1.2 | ColumnfwNetIfName | read-only | current | Interface Name |
| 1.3.6.1.4.1.2620.1.1.27.1.3 | ColumnfwNetIfIPAddr | read-only | current | IPv4 Address (an empty address will be denoted by 0.0.0.0) |
| 1.3.6.1.4.1.2620.1.1.27.1.4 | ColumnfwNetIfNetmask | read-only | current | Network Mask of the GW behind the Bridge (an empty mask will be denoted by 0.0.0.0) |
| 1.3.6.1.4.1.2620.1.1.27.1.5 | ColumnfwNetIfFlags | read-only | current | Flags indicating the type(s) of the device: Possible values include: VPN tunnel device 1 Unnumbered device 2 Proxy device 4 Bridge 8 Bond 16 Slave 32 (e.g. bel… |
| 1.3.6.1.4.1.2620.1.1.27.1.6 | ColumnfwNetIfPeerName | read-only | current | VPN Tunnel Peer Name |
| 1.3.6.1.4.1.2620.1.1.27.1.7 | ColumnfwNetIfRemoteIp | read-only | current | VPN Tunnel Remote IP |
| 1.3.6.1.4.1.2620.1.1.27.1.8 | ColumnfwNetIfTopology | read-only | current | Planned for future use only - currently should have the constant value of 4 |
| 1.3.6.1.4.1.2620.1.1.27.1.9 | ColumnfwNetIfProxyName | read-only | current | VPN Tunnel Proxy Name |
| 1.3.6.1.4.1.2620.1.1.27.1.10 | ColumnfwNetIfSlaves | read-only | current | If this device is acting as a master, this string contains space separated names of all its slave devices. |
| 1.3.6.1.4.1.2620.1.1.27.1.11 | ColumnfwNetIfPorts | read-only | current | Given an interface which is a port in a bridge, list all its siblings interfaces. The interfaces are separated by a single space. |
| 1.3.6.1.4.1.2620.1.1.27.1.12 | ColumnfwNetIfIPV6Addr | read-only | current | IPv6 Address given in an hexa format . |
| 1.3.6.1.4.1.2620.1.1.27.1.13 | ColumnfwNetIfIPV6AddrLen | read-only | current | IPv6 Address length |
| 1.3.6.1.4.1.2620.1.1.30 | NodefwLSConn | |||
| 1.3.6.1.4.1.2620.1.1.30.1 | ScalarfwLSConnOverall | read-only | current | Connectivity with log servers, Ok(0), Warnning(1) and Error(2) |
| 1.3.6.1.4.1.2620.1.1.30.2 | ScalarfwLSConnOverallDesc | read-only | current | Description of connectivity status with log servers |
| 1.3.6.1.4.1.2620.1.1.30.3 | TablefwLSConnTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.30.3.1 | RowfwLSConnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.1.30.3.1.1 | ColumnfwLSConnIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.1.30.3.1.2 | ColumnfwLSConnName | read-only | current | Log Server Name\IP |
| 1.3.6.1.4.1.2620.1.1.30.3.1.3 | ColumnfwLSConnState | read-only | current | Connectivity state with the log server Ok(0), Error(1) and Not Active(2) |
| 1.3.6.1.4.1.2620.1.1.30.3.1.4 | ColumnfwLSConnStateDesc | read-only | current | Description of connectivity state with the log server |
| 1.3.6.1.4.1.2620.1.1.30.3.1.5 | ColumnfwLSConnSendRate | read-only | current | Logs Sending Rate to the Log Server |
| 1.3.6.1.4.1.2620.1.1.30.4 | ScalarfwLocalLoggingDesc | read-only | current | Description of local logging status |
| 1.3.6.1.4.1.2620.1.1.30.5 | ScalarfwLocalLoggingStat | read-only | current | Writing logs localy, To log servers(0), Local configured (1) Local due to connectivity(2) Local due to high rate(3) |
| 1.3.6.1.4.1.2620.1.1.30.6 | ScalarfwLocalLoggingWriteRate | read-only | current | Local Logging Writing Rate |
| 1.3.6.1.4.1.2620.1.1.30.7 | ScalarfwLoggingHandlingRate | read-only | current | Total Logging Handling Rate (Local writing and Sending to Log Server) |
| 1.3.6.1.4.1.2620.1.2 | Nodevpn | |||
| 1.3.6.1.4.1.2620.1.2.1 | ScalarcpvProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.2.2 | ScalarcpvVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.2.3 | ScalarcpvVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.2.4 | NodecpvGeneral | |||
| 1.3.6.1.4.1.2620.1.2.4.1 | NodecpvStatistics | |||
| 1.3.6.1.4.1.2620.1.2.4.1.1 | ScalarcpvEncPackets | read-only | current | Encrypted packets |
| 1.3.6.1.4.1.2620.1.2.4.1.2 | ScalarcpvDecPackets | read-only | current | Decrypted packets |
| 1.3.6.1.4.1.2620.1.2.4.2 | NodecpvErrors | |||
| 1.3.6.1.4.1.2620.1.2.4.2.1 | ScalarcpvErrOut | read-only | current | Encryption errors |
| 1.3.6.1.4.1.2620.1.2.4.2.2 | ScalarcpvErrIn | read-only | current | Decryption errors |
| 1.3.6.1.4.1.2620.1.2.4.2.3 | ScalarcpvErrIke | read-only | current | IKE errors |
| 1.3.6.1.4.1.2620.1.2.4.2.4 | ScalarcpvErrPolicy | read-only | current | Policy errors |
| 1.3.6.1.4.1.2620.1.2.5 | NodecpvIpsec | |||
| 1.3.6.1.4.1.2620.1.2.5.2 | NodecpvSaStatistics | |||
| 1.3.6.1.4.1.2620.1.2.5.2.1 | ScalarcpvCurrEspSAsIn | read-only | current | IPsec current Inbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.2 | ScalarcpvTotalEspSAsIn | read-only | current | IPsec total Inbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.3 | ScalarcpvCurrEspSAsOut | read-only | current | IPsec current Outbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.4 | ScalarcpvTotalEspSAsOut | read-only | current | IPsec total Outbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.5 | ScalarcpvCurrAhSAsIn | read-only | current | IPsec current Inbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.6 | ScalarcpvTotalAhSAsIn | read-only | current | IPsec total Inbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.7 | ScalarcpvCurrAhSAsOut | read-only | current | IPsec current Outbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.8 | ScalarcpvTotalAhSAsOut | read-only | current | IPsec total Outbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.9 | ScalarcpvMaxConncurEspSAsIn | read-only | current | IPsec max concurrent Inbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.10 | ScalarcpvMaxConncurEspSAsOut | read-only | current | IPsec max concurrent Outbound ESP SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.11 | ScalarcpvMaxConncurAhSAsIn | read-only | current | IPsec max concurrent Inbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.2.12 | ScalarcpvMaxConncurAhSAsOut | read-only | current | IPsec max concurrent Outbound AH SAs |
| 1.3.6.1.4.1.2620.1.2.5.3 | NodecpvSaErrors | |||
| 1.3.6.1.4.1.2620.1.2.5.3.1 | ScalarcpvSaDecrErr | read-only | current | IPsec decryption errors |
| 1.3.6.1.4.1.2620.1.2.5.3.2 | ScalarcpvSaAuthErr | read-only | current | IPsec authentication errors |
| 1.3.6.1.4.1.2620.1.2.5.3.3 | ScalarcpvSaReplayErr | read-only | current | IPsec replay errors |
| 1.3.6.1.4.1.2620.1.2.5.3.4 | ScalarcpvSaPolicyErr | read-only | current | IPsec policy errors |
| 1.3.6.1.4.1.2620.1.2.5.3.5 | ScalarcpvSaOtherErrIn | read-only | current | IPsec other inbound errors |
| 1.3.6.1.4.1.2620.1.2.5.3.6 | ScalarcpvSaOtherErrOut | read-only | current | IPsec other outbound errors |
| 1.3.6.1.4.1.2620.1.2.5.3.7 | ScalarcpvSaUnknownSpiErr | read-only | current | IPsec unknown SPI errors |
| 1.3.6.1.4.1.2620.1.2.5.4 | NodecpvIpsecStatistics | |||
| 1.3.6.1.4.1.2620.1.2.5.4.1 | ScalarcpvIpsecUdpEspEncPkts | read-only | current | IPsec UDP ESP encrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.2 | ScalarcpvIpsecUdpEspDecPkts | read-only | current | IPsec UDP ESP decrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.3 | ScalarcpvIpsecAhEncPkts | read-only | current | IPsec AH encrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.4 | ScalarcpvIpsecAhDecPkts | read-only | current | IPsec AH decrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.5 | ScalarcpvIpsecEspEncPkts | read-only | current | IPsec ESP encrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.6 | ScalarcpvIpsecEspDecPkts | read-only | current | IPsec ESP decrypted packets |
| 1.3.6.1.4.1.2620.1.2.5.4.7 | ScalarcpvIpsecDecomprBytesBefore | read-only | current | IPsec bytes before decompression |
| 1.3.6.1.4.1.2620.1.2.5.4.8 | ScalarcpvIpsecDecomprBytesAfter | read-only | current | IPsec bytes after decompression |
| 1.3.6.1.4.1.2620.1.2.5.4.9 | ScalarcpvIpsecDecomprOverhead | read-only | current | IPsec bytes decompression overhead |
| 1.3.6.1.4.1.2620.1.2.5.4.10 | ScalarcpvIpsecDecomprPkts | read-only | current | IPsec packets decompressed |
| 1.3.6.1.4.1.2620.1.2.5.4.11 | ScalarcpvIpsecDecomprErr | read-only | current | IPsec decompression errors |
| 1.3.6.1.4.1.2620.1.2.5.4.12 | ScalarcpvIpsecComprBytesBefore | read-only | current | IPsec bytes before compression |
| 1.3.6.1.4.1.2620.1.2.5.4.13 | ScalarcpvIpsecComprBytesAfter | read-only | current | IPsec bytes after compression |
| 1.3.6.1.4.1.2620.1.2.5.4.14 | ScalarcpvIpsecComprOverhead | read-only | current | IPsec bytes compression overhead |
| 1.3.6.1.4.1.2620.1.2.5.4.15 | ScalarcpvIpsecNonCompressibleBytes | read-only | current | IPsec bytes non compressible |
| 1.3.6.1.4.1.2620.1.2.5.4.16 | ScalarcpvIpsecCompressiblePkts | read-only | current | IPsec packets compressed |
| 1.3.6.1.4.1.2620.1.2.5.4.17 | ScalarcpvIpsecNonCompressiblePkts | read-only | current | IPsec packets non compressible |
| 1.3.6.1.4.1.2620.1.2.5.4.18 | ScalarcpvIpsecComprErrors | read-only | current | IPsec compression errors |
| 1.3.6.1.4.1.2620.1.2.5.4.19 | ScalarcpvIpsecEspEncBytes | read-only | current | IPsec ESP encrypted bytes |
| 1.3.6.1.4.1.2620.1.2.5.4.20 | ScalarcpvIpsecEspDecBytes | read-only | current | IPsec ESP decrypted bytes |
| 1.3.6.1.4.1.2620.1.2.6 | NodecpvFwz | |||
| 1.3.6.1.4.1.2620.1.2.6.1 | NodecpvFwzStatistics | |||
| 1.3.6.1.4.1.2620.1.2.6.1.1 | ScalarcpvFwzEncapsEncPkts | read-only | current | Fwz encapsulated encrypted packets |
| 1.3.6.1.4.1.2620.1.2.6.1.2 | ScalarcpvFwzEncapsDecPkts | read-only | current | Fwz encapsulated decrypted packets |
| 1.3.6.1.4.1.2620.1.2.6.1.3 | ScalarcpvFwzEncPkts | read-only | current | Fwz encrypted packets |
| 1.3.6.1.4.1.2620.1.2.6.1.4 | ScalarcpvFwzDecPkts | read-only | current | Fwz decrypted packets |
| 1.3.6.1.4.1.2620.1.2.6.2 | NodecpvFwzErrors | |||
| 1.3.6.1.4.1.2620.1.2.6.2.1 | ScalarcpvFwzEncapsEncErrs | read-only | current | Fwz encapsulated encryption errors |
| 1.3.6.1.4.1.2620.1.2.6.2.2 | ScalarcpvFwzEncapsDecErrs | read-only | current | Fwz encapsulated decryption errors |
| 1.3.6.1.4.1.2620.1.2.6.2.3 | ScalarcpvFwzEncErrs | read-only | current | Fwz encryption errors |
| 1.3.6.1.4.1.2620.1.2.6.2.4 | ScalarcpvFwzDecErrs | read-only | current | Fwz decryption errors |
| 1.3.6.1.4.1.2620.1.2.8 | NodecpvAccelerator | |||
| 1.3.6.1.4.1.2620.1.2.8.1 | NodecpvHwAccelGeneral | |||
| 1.3.6.1.4.1.2620.1.2.8.1.1 | ScalarcpvHwAccelVendor | read-only | current | HW accel. vendor |
| 1.3.6.1.4.1.2620.1.2.8.1.2 | ScalarcpvHwAccelStatus | read-only | current | HW accel. status |
| 1.3.6.1.4.1.2620.1.2.8.1.3 | ScalarcpvHwAccelDriverMajorVer | read-only | current | HW accel. driver major version |
| 1.3.6.1.4.1.2620.1.2.8.1.4 | ScalarcpvHwAccelDriverMinorVer | read-only | current | HW accel. driver minor version |
| 1.3.6.1.4.1.2620.1.2.8.2 | NodecpvHwAccelStatistics | |||
| 1.3.6.1.4.1.2620.1.2.8.2.1 | ScalarcpvHwAccelEspEncPkts | read-only | current | HW accel. encrypted IPsec ESP packets |
| 1.3.6.1.4.1.2620.1.2.8.2.2 | ScalarcpvHwAccelEspDecPkts | read-only | current | HW accel. decrypted IPsec ESP packets |
| 1.3.6.1.4.1.2620.1.2.8.2.3 | ScalarcpvHwAccelEspEncBytes | read-only | current | HW accel. encrypted IPsec ESP bytes |
| 1.3.6.1.4.1.2620.1.2.8.2.4 | ScalarcpvHwAccelEspDecBytes | read-only | current | HW accel. decrypted IPsec ESP bytes |
| 1.3.6.1.4.1.2620.1.2.8.2.5 | ScalarcpvHwAccelAhEncPkts | read-only | current | HW accel. encrypted IPsec AH packets |
| 1.3.6.1.4.1.2620.1.2.8.2.6 | ScalarcpvHwAccelAhDecPkts | read-only | current | HW accel. decrypted IPsec AH packets |
| 1.3.6.1.4.1.2620.1.2.8.2.7 | ScalarcpvHwAccelAhEncBytes | read-only | current | HW accel. encrypted IPsec AH bytes |
| 1.3.6.1.4.1.2620.1.2.8.2.8 | ScalarcpvHwAccelAhDecBytes | read-only | current | HW accel. decrypted IPsec AH bytes |
| 1.3.6.1.4.1.2620.1.2.9 | NodecpvIKE | |||
| 1.3.6.1.4.1.2620.1.2.9.1 | NodecpvIKEglobals | |||
| 1.3.6.1.4.1.2620.1.2.9.1.1 | ScalarcpvIKECurrSAs | read-only | current | IKE current SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.2 | ScalarcpvIKECurrInitSAs | read-only | current | IKE current initiated SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.3 | ScalarcpvIKECurrRespSAs | read-only | current | IKE current responded SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.4 | ScalarcpvIKETotalSAs | read-only | current | IKE total SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.5 | ScalarcpvIKETotalInitSAs | read-only | current | IKE total initiated SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.6 | ScalarcpvIKETotalRespSAs | read-only | current | IKE total responded SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.7 | ScalarcpvIKETotalSAsAttempts | read-only | current | IKE total SAs attempts |
| 1.3.6.1.4.1.2620.1.2.9.1.8 | ScalarcpvIKETotalSAsInitAttempts | read-only | current | IKE total SAs initiated attempts |
| 1.3.6.1.4.1.2620.1.2.9.1.9 | ScalarcpvIKETotalSAsRespAttempts | read-only | current | IKE total SAs responded attempts |
| 1.3.6.1.4.1.2620.1.2.9.1.10 | ScalarcpvIKEMaxConncurSAs | read-only | current | IKE max concurrent SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.11 | ScalarcpvIKEMaxConncurInitSAs | read-only | current | IKE max concurrent initiated SAs |
| 1.3.6.1.4.1.2620.1.2.9.1.12 | ScalarcpvIKEMaxConncurRespSAs | read-only | current | IKE max concurrent responded SAs |
| 1.3.6.1.4.1.2620.1.2.9.2 | NodecpvIKEerrors | |||
| 1.3.6.1.4.1.2620.1.2.9.2.1 | ScalarcpvIKETotalFailuresInit | read-only | current | IKE total failures (initiator errors) |
| 1.3.6.1.4.1.2620.1.2.9.2.2 | ScalarcpvIKENoResp | read-only | current | IKE no response from peer (initiator errors) |
| 1.3.6.1.4.1.2620.1.2.9.2.3 | ScalarcpvIKETotalFailuresResp | read-only | current | IKE total failures (responder errors) |
| 1.3.6.1.4.1.2620.1.2.10 | NodecpvIPsec | |||
| 1.3.6.1.4.1.2620.1.2.10.1 | NodecpvIPsecNIC | |||
| 1.3.6.1.4.1.2620.1.2.10.1.1 | ScalarcpvIPsecNICsNum | read-only | current | IPsec NIC: Number of IPsec NIC's |
| 1.3.6.1.4.1.2620.1.2.10.1.2 | ScalarcpvIPsecNICTotalDownLoadedSAs | read-only | current | IPsec NIC: Total downloaded SA's |
| 1.3.6.1.4.1.2620.1.2.10.1.3 | ScalarcpvIPsecNICCurrDownLoadedSAs | read-only | current | IPsec NIC: Current downloaded SA's |
| 1.3.6.1.4.1.2620.1.2.10.1.4 | ScalarcpvIPsecNICDecrBytes | read-only | current | IPsec NIC: Decrypted bytes by NIC |
| 1.3.6.1.4.1.2620.1.2.10.1.5 | ScalarcpvIPsecNICEncrBytes | read-only | current | IPsec NIC: Encrypted bytes by NIC |
| 1.3.6.1.4.1.2620.1.2.10.1.6 | ScalarcpvIPsecNICDecrPackets | read-only | current | IPsec NIC: Decrypted packets by NIC |
| 1.3.6.1.4.1.2620.1.2.10.1.7 | ScalarcpvIPsecNICEncrPackets | read-only | current | IPsec NIC: Encrypted packets by NIC |
| 1.3.6.1.4.1.2620.1.3 | Nodefg | |||
| 1.3.6.1.4.1.2620.1.3.1 | ScalarfgProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.3.2 | ScalarfgVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.3.3 | ScalarfgVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.3.4 | ScalarfgVersionString | read-only | current | Version string |
| 1.3.6.1.4.1.2620.1.3.5 | ScalarfgModuleKernelBuild | read-only | current | Kernel build |
| 1.3.6.1.4.1.2620.1.3.6 | ScalarfgStrPolicyName | read-only | current | Policy name |
| 1.3.6.1.4.1.2620.1.3.7 | ScalarfgInstallTime | read-only | current | Install time |
| 1.3.6.1.4.1.2620.1.3.8 | ScalarfgNumInterfaces | read-only | current | Interfaces num |
| 1.3.6.1.4.1.2620.1.3.9 | TablefgIfTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.3.9.1 | RowfgIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.1 | ColumnfgIfIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.2 | ColumnfgIfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.3 | ColumnfgPolicyName | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.4 | ColumnfgRateLimitIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.5 | ColumnfgRateLimitOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.6 | ColumnfgAvrRateIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.7 | ColumnfgAvrRateOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.8 | ColumnfgRetransPcktsIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.9 | ColumnfgRetransPcktsOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.10 | ColumnfgPendPcktsIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.11 | ColumnfgPendPcktsOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.12 | ColumnfgPendBytesIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.13 | ColumnfgPendBytesOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.14 | ColumnfgNumConnIn | read-only | current | |
| 1.3.6.1.4.1.2620.1.3.9.1.15 | ColumnfgNumConnOut | read-only | current | |
| 1.3.6.1.4.1.2620.1.5 | Nodeha | |||
| 1.3.6.1.4.1.2620.1.5.1 | ScalarhaProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.5.2 | ScalarhaInstalled | read-only | current | HA installed |
| 1.3.6.1.4.1.2620.1.5.3 | ScalarhaVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.5.4 | ScalarhaVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.5.5 | ScalarhaStarted | read-only | current | HA started |
| 1.3.6.1.4.1.2620.1.5.6 | ScalarhaState | read-only | current | HA state |
| 1.3.6.1.4.1.2620.1.5.7 | ScalarhaBlockState | read-only | current | HA blocking state |
| 1.3.6.1.4.1.2620.1.5.8 | ScalarhaIdentifier | read-only | current | HA identifier |
| 1.3.6.1.4.1.2620.1.5.10 | ScalarhaProtoVersion | read-only | current | HA protocol version |
| 1.3.6.1.4.1.2620.1.5.11 | ScalarhaWorkMode | read-only | current | Working mode |
| 1.3.6.1.4.1.2620.1.5.12 | TablehaIfTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.12.1 | RowhaIfEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.1 | ColumnhaIfIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.2 | ColumnhaIfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.3 | ColumnhaIP | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.4 | ColumnhaStatus | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.5 | ColumnhaVerified | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.6 | ColumnhaTrusted | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.12.1.7 | ColumnhaShared | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13 | TablehaProblemTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.13.1 | RowhaProblemEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.1 | ColumnhaProblemIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.2 | ColumnhaProblemName | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.3 | ColumnhaProblemStatus | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.4 | ColumnhaProblemPriority | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.5 | ColumnhaProblemVerified | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.13.1.6 | ColumnhaProblemDescr | read-only | current | |
| 1.3.6.1.4.1.2620.1.5.14 | ScalarhaVersionSting | read-only | current | Version string |
| 1.3.6.1.4.1.2620.1.5.15 | TablehaClusterIpTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.15.1 | RowhaClusterIpEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.15.1.1 | ColumnhaClusterIpIndex | read-only | current | Cluster IP index |
| 1.3.6.1.4.1.2620.1.5.15.1.2 | ColumnhaClusterIpIfName | read-only | current | Cluster IP interface name |
| 1.3.6.1.4.1.2620.1.5.15.1.3 | ColumnhaClusterIpAddr | read-only | current | Cluster IP address |
| 1.3.6.1.4.1.2620.1.5.15.1.4 | ColumnhaClusterIpNetMask | read-only | current | Cluster network mask |
| 1.3.6.1.4.1.2620.1.5.15.1.5 | ColumnhaClusterIpMemberNet | read-only | current | Cluster member network |
| 1.3.6.1.4.1.2620.1.5.15.1.6 | ColumnhaClusterIpMemberNetMask | read-only | current | Cluster member network mask |
| 1.3.6.1.4.1.2620.1.5.16 | TablehaClusterSyncTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.16.1 | RowhaClusterSyncEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.5.16.1.1 | ColumnhaClusterSyncIndex | read-only | current | Cluster sync index |
| 1.3.6.1.4.1.2620.1.5.16.1.2 | ColumnhaClusterSyncName | read-only | current | Cluster sync name |
| 1.3.6.1.4.1.2620.1.5.16.1.3 | ColumnhaClusterSyncAddr | read-only | current | Cluster sync address |
| 1.3.6.1.4.1.2620.1.5.16.1.4 | ColumnhaClusterSyncNetMask | read-only | current | Cluster sync network mask |
| 1.3.6.1.4.1.2620.1.5.101 | ScalarhaStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.5.102 | ScalarhaStatShort | read-only | current | Status short |
| 1.3.6.1.4.1.2620.1.5.103 | ScalarhaStatLong | read-only | current | Status long |
| 1.3.6.1.4.1.2620.1.5.999 | ScalarhaServicePack | read-only | current | Service pack |
| 1.3.6.1.4.1.2620.1.6 | Nodesvn | |||
| 1.3.6.1.4.1.2620.1.6.1 | ScalarsvnProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.6.2 | ScalarsvnProdVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.6.3 | ScalarsvnProdVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.6.4 | NodesvnInfo | |||
| 1.3.6.1.4.1.2620.1.6.4.1 | ScalarsvnVersion | read-only | current | SVN version |
| 1.3.6.1.4.1.2620.1.6.4.2 | ScalarsvnBuild | read-only | current | SVN build number |
| 1.3.6.1.4.1.2620.1.6.5 | NodesvnOSInfo | |||
| 1.3.6.1.4.1.2620.1.6.5.1 | ScalarosName | read-only | current | OS name |
| 1.3.6.1.4.1.2620.1.6.5.2 | ScalarosMajorVer | read-only | current | OS Major version |
| 1.3.6.1.4.1.2620.1.6.5.3 | ScalarosMinorVer | read-only | current | OS minor version |
| 1.3.6.1.4.1.2620.1.6.5.4 | ScalarosBuildNum | read-only | current | OS build number |
| 1.3.6.1.4.1.2620.1.6.5.5 | ScalarosSPmajor | read-only | current | OS SP major |
| 1.3.6.1.4.1.2620.1.6.5.6 | ScalarosSPminor | read-only | current | OS SP minor |
| 1.3.6.1.4.1.2620.1.6.5.7 | ScalarosVersionLevel | read-only | current | OS version level |
| 1.3.6.1.4.1.2620.1.6.6 | TableroutingTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.6.1 | RowroutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.6.1.1 | ColumnroutingIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.6.1.2 | ColumnroutingDest | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.6.1.3 | ColumnroutingMask | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.6.1.4 | ColumnroutingGatweway | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.6.1.5 | ColumnroutingIntrfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7 | NodesvnPerf | |||
| 1.3.6.1.4.1.2620.1.6.7.1 | NodesvnMem | |||
| 1.3.6.1.4.1.2620.1.6.7.1.1 | ScalarmemTotalVirtual | read-only | current | Total virtual memory (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memTotalVirtual64, which is supported by Check Point SVN FP3 an… |
| 1.3.6.1.4.1.2620.1.6.7.1.2 | ScalarmemActiveVirtual | read-only | current | Active virtual memory (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memActiveVirtual64, which is supported by Check Point SVN FP3 … |
| 1.3.6.1.4.1.2620.1.6.7.1.3 | ScalarmemTotalReal | read-only | current | Total real memory (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memTotalReal64, which is supported by Check Point SVN FP3 and abov… |
| 1.3.6.1.4.1.2620.1.6.7.1.4 | ScalarmemActiveReal | read-only | current | Active real memory (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memActiveReal64, which is supported by Check Point SVN FP3 and ab… |
| 1.3.6.1.4.1.2620.1.6.7.1.5 | ScalarmemFreeReal | read-only | current | Free real memory (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memFreeReal64, which is supported by Check Point SVN FP3 and above.… |
| 1.3.6.1.4.1.2620.1.6.7.1.6 | ScalarmemSwapsSec | read-only | current | Memory swaped pages/sec (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memSwapsSec64, which is supported by Check Point SVN FP3 and… |
| 1.3.6.1.4.1.2620.1.6.7.1.7 | ScalarmemDiskTransfers | read-only | current | Memory to Disk transfers/sec (32 bit) NOTE: This 32 bit object has been superseded by a 64 bit object - memDiskTransfers64, which is supported by Check Point S… |
| 1.3.6.1.4.1.2620.1.6.7.2 | NodesvnProc | |||
| 1.3.6.1.4.1.2620.1.6.7.2.1 | ScalarprocUsrTime | read-only | current | Processor user time |
| 1.3.6.1.4.1.2620.1.6.7.2.2 | ScalarprocSysTime | read-only | current | Processor system time |
| 1.3.6.1.4.1.2620.1.6.7.2.3 | ScalarprocIdleTime | read-only | current | Processor idle time |
| 1.3.6.1.4.1.2620.1.6.7.2.4 | ScalarprocUsage | read-only | current | Processor usage |
| 1.3.6.1.4.1.2620.1.6.7.2.5 | ScalarprocQueue | read-only | current | Processor queue length |
| 1.3.6.1.4.1.2620.1.6.7.2.6 | ScalarprocInterrupts | read-only | current | Processor interrupts/sec |
| 1.3.6.1.4.1.2620.1.6.7.2.7 | ScalarprocNum | read-only | current | Number of processors |
| 1.3.6.1.4.1.2620.1.6.7.3 | NodesvnDisk | |||
| 1.3.6.1.4.1.2620.1.6.7.3.1 | ScalardiskTime | read-only | current | Time the disk is performing io requests |
| 1.3.6.1.4.1.2620.1.6.7.3.2 | ScalardiskQueue | read-only | current | Disk requests queue length |
| 1.3.6.1.4.1.2620.1.6.7.3.3 | ScalardiskPercent | read-only | current | Percent of free space |
| 1.3.6.1.4.1.2620.1.6.7.3.4 | ScalardiskFreeTotal | read-only | current | Disk total free space |
| 1.3.6.1.4.1.2620.1.6.7.3.5 | ScalardiskFreeAvail | read-only | current | Disk available free space |
| 1.3.6.1.4.1.2620.1.6.7.3.6 | ScalardiskTotal | read-only | current | Disk total space |
| 1.3.6.1.4.1.2620.1.6.7.4 | NodesvnMem64 | |||
| 1.3.6.1.4.1.2620.1.6.7.4.1 | ScalarmemTotalVirtual64 | read-only | current | Total virtual memory |
| 1.3.6.1.4.1.2620.1.6.7.4.2 | ScalarmemActiveVirtual64 | read-only | current | Active virtual memory |
| 1.3.6.1.4.1.2620.1.6.7.4.3 | ScalarmemTotalReal64 | read-only | current | Total real memory |
| 1.3.6.1.4.1.2620.1.6.7.4.4 | ScalarmemActiveReal64 | read-only | current | Active real memory |
| 1.3.6.1.4.1.2620.1.6.7.4.5 | ScalarmemFreeReal64 | read-only | current | Free real memory |
| 1.3.6.1.4.1.2620.1.6.7.4.6 | ScalarmemSwapsSec64 | read-only | current | Memory swaped pages/sec |
| 1.3.6.1.4.1.2620.1.6.7.4.7 | ScalarmemDiskTransfers64 | read-only | current | Memory to Disk transfers/sec |
| 1.3.6.1.4.1.2620.1.6.7.5 | TablemultiProcTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1 | RowmultiProcEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.1 | ColumnmultiProcIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.2 | ColumnmultiProcUserTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.3 | ColumnmultiProcSystemTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.4 | ColumnmultiProcIdleTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.5 | ColumnmultiProcUsage | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.6 | ColumnmultiProcRunQueue | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.5.1.7 | ColumnmultiProcInterrupts | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6 | TablemultiDiskTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1 | RowmultiDiskEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.1 | ColumnmultiDiskIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.2 | ColumnmultiDiskName | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.3 | ColumnmultiDiskSize | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.4 | ColumnmultiDiskUsed | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.5 | ColumnmultiDiskFreeTotalBytes | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.6 | ColumnmultiDiskFreeTotalPercent | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.7 | ColumnmultiDiskFreeAvailableBytes | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.6.1.8 | ColumnmultiDiskFreeAvailablePercent | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.7 | NoderaidInfo | |||
| 1.3.6.1.4.1.2620.1.6.7.7.1 | TableraidVolumeTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1 | RowraidVolumeEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.1 | ColumnraidVolumeIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.2 | ColumnraidVolumeID | read-only | current | Raid volume identification number |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.3 | ColumnraidVolumeType | read-only | current | Raid volume type, RAID-0, RAID-1E, RAID-1, RAID_10, RAID-4, RAID-5, RAID-6, RAID-60, RAID-50 (value 0-8 respectively) |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.4 | ColumnnumOfDisksOnRaid | read-only | current | Number of disks on the raid |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.5 | ColumnraidVolumeMaxLBA | read-only | current | Raid maximum number of Logical Block Addressing |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.6 | ColumnraidVolumeState | read-only | current | Raid state: OPTIMAL(0), DEGRADED (1), FAILED(2) or UNKNOWN(other)) |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.7 | ColumnraidVolumeFlags | read-only | current | Raid status flags (can get more then one): ENABLED(0x01), QUIESCED(0x02), RESYNC_IN_PROGRESS(0x04), VOLUME_INACTIVE(0x08), NOT_CONFIGURED(0x10), USING_INTERIM_… |
| 1.3.6.1.4.1.2620.1.6.7.7.1.1.8 | ColumnraidVolumeSize | read-only | current | Raid Volume Size (GB) |
| 1.3.6.1.4.1.2620.1.6.7.7.2 | TableraidDiskTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1 | RowraidDiskEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.1 | ColumnraidDiskIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.2 | ColumnraidDiskVolumeID | read-only | current | Raid volume identification |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.3 | ColumnraidDiskID | read-only | current | Raid disk SCSI identification number |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.4 | ColumnraidDiskNumber | read-only | current | Raid disk number: on Appliance 0 - upper disc, 1 - lower disc |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.5 | ColumnraidDiskVendor | read-only | current | Raid disk vendor |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.6 | ColumnraidDiskProductID | read-only | current | Raid disk product identification |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.7 | ColumnraidDiskRevision | read-only | current | Raid disk revision level |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.8 | ColumnraidDiskMaxLBA | read-only | current | Raid disk maximum number of Logical Block Addressing |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.9 | ColumnraidDiskState | read-only | current | Raid disk state (can get more then one): ONLINE(0x00), MISSING(0x01), NOT_COMPATIBLE(0x02), DISC_FAILED(0x03), INITIALIZING(0x04), OFFLINE_REQUESTED(0x05), FAI… |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.10 | ColumnraidDiskFlags | read-only | current | Raid disk flags: OUT_OF_SYNC(0x01),QUIESCED(0x02),VERIFYING(0x04),READY(0x08) or NONE(other) |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.11 | ColumnraidDiskSyncState | read-only | current | Raid disk synchronized percent completed during the synchronization process, relevant only when RESYNC_IN_PROGRESS flag is on |
| 1.3.6.1.4.1.2620.1.6.7.7.2.1.12 | ColumnraidDiskSize | read-only | current | Raid disk size (GB) |
| 1.3.6.1.4.1.2620.1.6.7.8 | NodesensorInfo | |||
| 1.3.6.1.4.1.2620.1.6.7.8.1 | TabletempertureSensorTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1 | RowtempertureSensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.1 | ColumntempertureSensorIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.2 | ColumntempertureSensorName | read-only | current | Sensor name |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.3 | ColumntempertureSensorValue | read-only | current | Sensor value |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.4 | ColumntempertureSensorUnit | read-only | current | Sensor unit |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.5 | ColumntempertureSensorType | read-only | current | Sensor type |
| 1.3.6.1.4.1.2620.1.6.7.8.1.1.6 | ColumntempertureSensorStatus | read-only | current | Sensor is out of range TRUE(1), FALSE(0), READING ERROR(2) |
| 1.3.6.1.4.1.2620.1.6.7.8.2 | TablefanSpeedSensorTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1 | RowfanSpeedSensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.1 | ColumnfanSpeedSensorIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.2 | ColumnfanSpeedSensorName | read-only | current | Sensor name |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.3 | ColumnfanSpeedSensorValue | read-only | current | Sensor value |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.4 | ColumnfanSpeedSensorUnit | read-only | current | Sensor unit |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.5 | ColumnfanSpeedSensorType | read-only | current | Sensor type |
| 1.3.6.1.4.1.2620.1.6.7.8.2.1.6 | ColumnfanSpeedSensorStatus | read-only | current | Sensor is out of range TRUE(1), FALSE(0), READING ERROR(2) |
| 1.3.6.1.4.1.2620.1.6.7.8.3 | TablevoltageSensorTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1 | RowvoltageSensorEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.1 | ColumnvoltageSensorIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.2 | ColumnvoltageSensorName | read-only | current | Sensor name |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.3 | ColumnvoltageSensorValue | read-only | current | Sensor value |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.4 | ColumnvoltageSensorUnit | read-only | current | Sensor unit |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.5 | ColumnvoltageSensorType | read-only | current | Sensor type |
| 1.3.6.1.4.1.2620.1.6.7.8.3.1.6 | ColumnvoltageSensorStatus | read-only | current | Sensor is out of range TRUE(1), FALSE(0), READING ERROR(2) |
| 1.3.6.1.4.1.2620.1.6.7.9 | NodepowerSupplyInfo | |||
| 1.3.6.1.4.1.2620.1.6.7.9.1 | TablepowerSupplyTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.9.1.1 | RowpowerSupplyEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.7.9.1.1.1 | ColumnpowerSupplyIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.7.9.1.1.2 | ColumnpowerSupplyStatus | read-only | current | Power supply status |
| 1.3.6.1.4.1.2620.1.6.8 | ScalarsvnSysTime | read-only | current | System time |
| 1.3.6.1.4.1.2620.1.6.9 | NodesvnRoutingModify | |||
| 1.3.6.1.4.1.2620.1.6.9.2 | ScalarsvnRouteModDest | read-only | current | Destination routing modification |
| 1.3.6.1.4.1.2620.1.6.9.3 | ScalarsvnRouteModMask | read-only | current | Subnet mask routing modification |
| 1.3.6.1.4.1.2620.1.6.9.4 | ScalarsvnRouteModGateway | read-only | current | Gateway routing modification |
| 1.3.6.1.4.1.2620.1.6.9.5 | ScalarsvnRouteModIfIndex | read-only | current | Interface index routing modification |
| 1.3.6.1.4.1.2620.1.6.9.6 | ScalarsvnRouteModIfName | read-only | current | Interface name routing modification |
| 1.3.6.1.4.1.2620.1.6.9.10 | ScalarsvnRouteModAction | read-only | current | Routing modification action |
| 1.3.6.1.4.1.2620.1.6.10 | ScalarsvnUTCTimeOffset | read-only | current | UTC time offset |
| 1.3.6.1.4.1.2620.1.6.11 | NodesvnLogDaemon | |||
| 1.3.6.1.4.1.2620.1.6.11.1 | ScalarsvnLogDStat | read-only | current | Log Daemon Status |
| 1.3.6.1.4.1.2620.1.6.12 | ScalarsvnSysStartTime | read-only | current | System start time |
| 1.3.6.1.4.1.2620.1.6.13 | ScalarsvnSysUniqId | read-only | current | System unique ID |
| 1.3.6.1.4.1.2620.1.6.15 | ScalarsvnWebUIPort | read-only | current | Web UI port (0 - Not supported) |
| 1.3.6.1.4.1.2620.1.6.16 | NodesvnApplianceInfo | |||
| 1.3.6.1.4.1.2620.1.6.16.3 | ScalarsvnApplianceSerialNumber | read-only | current | Appliance Serial Number |
| 1.3.6.1.4.1.2620.1.6.16.7 | ScalarsvnApplianceProductName | read-only | current | Appliance Product Name |
| 1.3.6.1.4.1.2620.1.6.16.9 | ScalarsvnApplianceManufacturer | read-only | current | Appliance Manufacturer |
| 1.3.6.1.4.1.2620.1.6.16.10 | ScalarsvnApplianceSeriesString | read-only | current | Appliance Series String |
| 1.3.6.1.4.1.2620.1.6.18 | NodesvnLicensing | |||
| 1.3.6.1.4.1.2620.1.6.18.1 | TablelicensingTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1 | RowlicensingEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.1 | ColumnlicensingIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.2 | ColumnlicensingID | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.3 | ColumnlicensingBladeName | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.4 | ColumnlicensingState | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.5 | ColumnlicensingExpirationDate | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.6 | ColumnlicensingImpact | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.7 | ColumnlicensingBladeActive | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.8 | ColumnlicensingTotalQuota | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.1.1.9 | ColumnlicensingUsedQuota | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2 | NodelicensingAssetInfo | |||
| 1.3.6.1.4.1.2620.1.6.18.2.1 | ScalarlicensingAssetAccountId | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.2 | ScalarlicensingAssetPackageDescription | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.3 | ScalarlicensingAssetContainerCK | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.4 | ScalarlicensingAssetContainerSKU | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.5 | ScalarlicensingAssetSupportLevel | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.6 | ScalarlicensingAssetSupportExpiration | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.18.2.7 | ScalarlicensingAssetActivationStatus | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.19 | ScalarsvnConnectivity | read-only | current | User Center connectivity |
| 1.3.6.1.4.1.2620.1.6.20 | NodesvnUpdatesInfo | |||
| 1.3.6.1.4.1.2620.1.6.20.1 | ScalarsvnUpdatesInfoBuild | read-only | current | Deployment agent build number |
| 1.3.6.1.4.1.2620.1.6.20.2 | ScalarsvnUpdatesInfoStatus | read-only | current | Deployment agent status |
| 1.3.6.1.4.1.2620.1.6.20.3 | ScalarsvnUpdatesInfoConnection | read-only | current | Cloud connection |
| 1.3.6.1.4.1.2620.1.6.20.4 | ScalarsvnUpdatesInfoAvailablePackages | read-only | current | Available packages count |
| 1.3.6.1.4.1.2620.1.6.20.5 | ScalarsvnUpdatesInfoAvailableRecommended | read-only | current | Available recommended packages count |
| 1.3.6.1.4.1.2620.1.6.20.6 | ScalarsvnUpdatesInfoAvailableHotfixes | read-only | current | Available hotfixes count |
| 1.3.6.1.4.1.2620.1.6.20.7 | TableupdatesInstalledTable | not-accessible | current | Installed updates table. This feature is supported only on gaia |
| 1.3.6.1.4.1.2620.1.6.20.7.1 | RowupdatesInstalledEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.20.7.1.1 | ColumnupdatesInstalledIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.20.7.1.2 | ColumnupdatesInstalledName | read-only | current | Installed package name |
| 1.3.6.1.4.1.2620.1.6.20.7.1.3 | ColumnupdatesInstalledType | read-only | current | Installed package type |
| 1.3.6.1.4.1.2620.1.6.20.8 | TableupdatesRecommendedTable | not-accessible | current | Recommended updates table. This feature is supported only on gaia |
| 1.3.6.1.4.1.2620.1.6.20.8.1 | RowupdatesRecommendedEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.20.8.1.1 | ColumnupdatesRecommendedIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.20.8.1.2 | ColumnupdatesRecommendedName | read-only | current | Recommended package name |
| 1.3.6.1.4.1.2620.1.6.20.8.1.3 | ColumnupdatesRecommendedType | read-only | current | Recommended package type |
| 1.3.6.1.4.1.2620.1.6.20.8.1.4 | ColumnupdatesRecommendedStatus | read-only | current | Recommended package status |
| 1.3.6.1.4.1.2620.1.6.50 | NodesvnNetStat | |||
| 1.3.6.1.4.1.2620.1.6.50.1 | TablesvnNetIfTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1 | RowsvnNetIfTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.1 | ColumnsvnNetIfIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.2 | ColumnsvnNetIfVsid | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.3 | ColumnsvnNetIfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.4 | ColumnsvnNetIfAddress | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.5 | ColumnsvnNetIfMask | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.6 | ColumnsvnNetIfMTU | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.7 | ColumnsvnNetIfState | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.8 | ColumnsvnNetIfMAC | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.9 | ColumnsvnNetIfDescription | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.50.1.1.10 | ColumnsvnNetIfOperState | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51 | TablevsRoutingTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.51.1 | RowvsRoutingEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.1 | ColumnvsRoutingIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.2 | ColumnvsRoutingDest | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.3 | ColumnvsRoutingMask | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.4 | ColumnvsRoutingGateway | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.5 | ColumnvsRoutingIntrfName | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.51.1.6 | ColumnvsRoutingVsId | read-only | current | |
| 1.3.6.1.4.1.2620.1.6.101 | ScalarsvnStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.6.102 | ScalarsvnStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.6.103 | ScalarsvnStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.6.123 | NodesvnPlatformInfo | |||
| 1.3.6.1.4.1.2620.1.6.123.1 | NodesupportedPlatforms | |||
| 1.3.6.1.4.1.2620.1.6.123.1.1 | ScalarcheckPointUTM-1450 | read-only | current | UTM-1 450 |
| 1.3.6.1.4.1.2620.1.6.123.1.2 | ScalarcheckPointUTM-11050 | read-only | current | UTM-1 1050 |
| 1.3.6.1.4.1.2620.1.6.123.1.3 | ScalarcheckPointUTM-12050 | read-only | current | UTM-1 2050 |
| 1.3.6.1.4.1.2620.1.6.123.1.4 | ScalarcheckPointUTM-1130 | read-only | current | UTM-1 130 |
| 1.3.6.1.4.1.2620.1.6.123.1.5 | ScalarcheckPointUTM-1270 | read-only | current | UTM-1 270 |
| 1.3.6.1.4.1.2620.1.6.123.1.6 | ScalarcheckPointUTM-1570 | read-only | current | UTM-1 570 |
| 1.3.6.1.4.1.2620.1.6.123.1.7 | ScalarcheckPointUTM-11070 | read-only | current | UTM-1 1070 |
| 1.3.6.1.4.1.2620.1.6.123.1.8 | ScalarcheckPointUTM-12070 | read-only | current | UTM-1 2070 |
| 1.3.6.1.4.1.2620.1.6.123.1.9 | ScalarcheckPointUTM-13070 | read-only | current | UTM-1 3070 |
| 1.3.6.1.4.1.2620.1.6.123.1.10 | ScalarcheckPointPower-15070 | read-only | current | Power-1 5070 |
| 1.3.6.1.4.1.2620.1.6.123.1.11 | ScalarcheckPointPower-19070 | read-only | current | Power-1 9070 |
| 1.3.6.1.4.1.2620.1.6.123.1.12 | ScalarcheckPointPower-111000 | read-only | current | Power-1 11000 |
| 1.3.6.1.4.1.2620.1.6.123.1.13 | ScalarcheckPointSmart-15 | read-only | current | Smart-1 5 |
| 1.3.6.1.4.1.2620.1.6.123.1.14 | ScalarcheckPointSmart-125 | read-only | current | Smart-1 25 |
| 1.3.6.1.4.1.2620.1.6.123.1.15 | ScalarcheckPointSmart-150 | read-only | current | Smart-1 50 |
| 1.3.6.1.4.1.2620.1.6.123.1.16 | ScalarcheckPointSmart-1150 | read-only | current | Smart-1 150 |
| 1.3.6.1.4.1.2620.1.6.123.1.17 | ScalarcheckPointIP150 | read-only | current | IP150 |
| 1.3.6.1.4.1.2620.1.6.123.1.18 | ScalarcheckPointIP280 | read-only | current | IP280 |
| 1.3.6.1.4.1.2620.1.6.123.1.19 | ScalarcheckPointIP290 | read-only | current | IP290 |
| 1.3.6.1.4.1.2620.1.6.123.1.20 | ScalarcheckPointIP390 | read-only | current | IP390 |
| 1.3.6.1.4.1.2620.1.6.123.1.21 | ScalarcheckPointIP560 | read-only | current | IP560 |
| 1.3.6.1.4.1.2620.1.6.123.1.22 | ScalarcheckPointIP690 | read-only | current | IP690 |
| 1.3.6.1.4.1.2620.1.6.123.1.23 | ScalarcheckPointIP1280 | read-only | current | IP1280 |
| 1.3.6.1.4.1.2620.1.6.123.1.24 | ScalarcheckPointIP2450 | read-only | current | IP2450 |
| 1.3.6.1.4.1.2620.1.6.123.1.25 | ScalarcheckPointUNIVERGEUnifiedWall1000 | read-only | current | UNIVERGE UnifiedWall 1000 |
| 1.3.6.1.4.1.2620.1.6.123.1.26 | ScalarcheckPointUNIVERGEUnifiedWall2000 | read-only | current | UNIVERGE UnifiedWall 2000 |
| 1.3.6.1.4.1.2620.1.6.123.1.27 | ScalarcheckPointUNIVERGEUnifiedWall4000 | read-only | current | UNIVERGE UnifiedWall 4000 |
| 1.3.6.1.4.1.2620.1.6.123.1.28 | ScalarcheckPointUNIVERGEUnifiedWall100 | read-only | current | UNIVERGE UnifiedWall 100 |
| 1.3.6.1.4.1.2620.1.6.123.1.29 | ScalarcheckPointDLP-19571 | read-only | current | DLP-1 9571 |
| 1.3.6.1.4.1.2620.1.6.123.1.30 | ScalarcheckPointDLP-12571 | read-only | current | DLP-1 2571 |
| 1.3.6.1.4.1.2620.1.6.123.1.31 | ScalarcheckPointIPS-12076 | read-only | current | IPS-1 2076 |
| 1.3.6.1.4.1.2620.1.6.123.1.32 | ScalarcheckPointIPS-15076 | read-only | current | IPS-1 5076 |
| 1.3.6.1.4.1.2620.1.6.123.1.33 | ScalarcheckPointIPS-19076 | read-only | current | IPS-1 9076 |
| 1.3.6.1.4.1.2620.1.6.123.1.34 | ScalarcheckPoint2200 | read-only | current | Check Point 2200 |
| 1.3.6.1.4.1.2620.1.6.123.1.35 | ScalarcheckPoint4200 | read-only | current | Check Point 4200 |
| 1.3.6.1.4.1.2620.1.6.123.1.36 | ScalarcheckPoint4400 | read-only | current | Check Point 4400 |
| 1.3.6.1.4.1.2620.1.6.123.1.37 | ScalarcheckPoint4600 | read-only | current | Check Point 4600 |
| 1.3.6.1.4.1.2620.1.6.123.1.38 | ScalarcheckPoint4800 | read-only | current | Check Point 4800 |
| 1.3.6.1.4.1.2620.1.6.123.1.39 | ScalarcheckPointTE250 | read-only | current | Check Point TE250 |
| 1.3.6.1.4.1.2620.1.6.123.1.40 | ScalarcheckPoint12200 | read-only | current | Check Point 12200 |
| 1.3.6.1.4.1.2620.1.6.123.1.41 | ScalarcheckPoint12400 | read-only | current | Check Point 12400 |
| 1.3.6.1.4.1.2620.1.6.123.1.42 | ScalarcheckPoint12600 | read-only | current | Check Point 12600 |
| 1.3.6.1.4.1.2620.1.6.123.1.43 | ScalarcheckPointTE1000 | read-only | current | Check Point TE1000 |
| 1.3.6.1.4.1.2620.1.6.123.1.44 | ScalarcheckPoint13500 | read-only | current | Check Point 13500 |
| 1.3.6.1.4.1.2620.1.6.123.1.45 | ScalarcheckPoint21400 | read-only | current | Check Point 21400 |
| 1.3.6.1.4.1.2620.1.6.123.1.46 | ScalarcheckPoint21600 | read-only | current | Check Point 21600 |
| 1.3.6.1.4.1.2620.1.6.123.1.47 | ScalarcheckPoint21700 | read-only | current | Check Point 21700 |
| 1.3.6.1.4.1.2620.1.6.123.1.48 | ScalarcheckPointVMware | read-only | current | VMware |
| 1.3.6.1.4.1.2620.1.6.123.1.49 | ScalarcheckPointOpenServer | read-only | current | Open Server |
| 1.3.6.1.4.1.2620.1.6.123.1.50 | ScalarcheckPointSmart-1205 | read-only | current | Smart-1 205 |
| 1.3.6.1.4.1.2620.1.6.123.1.51 | ScalarcheckPointSmart-1210 | read-only | current | Smart-1 210 |
| 1.3.6.1.4.1.2620.1.6.123.1.52 | ScalarcheckPointSmart-1225 | read-only | current | Smart-1 225 |
| 1.3.6.1.4.1.2620.1.6.123.1.53 | ScalarcheckPointSmart-13050 | read-only | current | Smart-1 3050 |
| 1.3.6.1.4.1.2620.1.6.123.1.54 | ScalarcheckPointSmart-13150 | read-only | current | Smart-1 3150 |
| 1.3.6.1.4.1.2620.1.6.123.1.55 | ScalarcheckPoint13800 | read-only | current | Check Point 13800 |
| 1.3.6.1.4.1.2620.1.6.123.1.56 | ScalarcheckPoint21800 | read-only | current | Check Point 21800 |
| 1.3.6.1.4.1.2620.1.6.999 | ScalarsvnServicePack | read-only | current | SVN service pack |
| 1.3.6.1.4.1.2620.1.7 | Nodemngmt | |||
| 1.3.6.1.4.1.2620.1.7.1 | ScalarmgProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.7.2 | ScalarmgVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.7.3 | ScalarmgVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.7.4 | ScalarmgBuildNumber | read-only | current | Build number |
| 1.3.6.1.4.1.2620.1.7.5 | ScalarmgActiveStatus | read-only | current | Active status |
| 1.3.6.1.4.1.2620.1.7.6 | ScalarmgFwmIsAlive | read-only | current | Managment is alive |
| 1.3.6.1.4.1.2620.1.7.7 | TablemgConnectedClientsTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.7.7.1 | RowmgConnectedClientsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.7.7.1.1 | ColumnmgIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.7.1.2 | ColumnmgClientName | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.7.1.3 | ColumnmgClientHost | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.7.1.4 | ColumnmgClientDbLock | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.7.1.5 | ColumnmgApplicationType | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14 | NodemgLogServerInfo | |||
| 1.3.6.1.4.1.2620.1.7.14.1 | ScalarmgLSLogReceiveRate | not-accessible | current | MGMT Log Server Log Receive Rate |
| 1.3.6.1.4.1.2620.1.7.14.2 | ScalarmgLSLogReceiveRatePeak | not-accessible | current | MGMT Log Server Log Receive Rate Peak |
| 1.3.6.1.4.1.2620.1.7.14.3 | ScalarmgLSLogReceiveRate10Min | not-accessible | current | MGMT Log Server Log Receive Rate (Last 10 Minutes) |
| 1.3.6.1.4.1.2620.1.7.14.4 | TablemgConnectedGatewaysTable | not-accessible | current | Connected Gateways Table |
| 1.3.6.1.4.1.2620.1.7.14.4.1 | RowmgConnectedGatewaysEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.7.14.4.1.1 | ColumnmglsGWIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14.4.1.2 | ColumnmglsGWIP | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14.4.1.3 | ColumnmglsGWState | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14.4.1.4 | ColumnmglsGWLastLoginTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14.4.1.5 | ColumnmglsGWLogReceiveRate | read-only | current | |
| 1.3.6.1.4.1.2620.1.7.14.5 | NodemgIndexerInfo | |||
| 1.3.6.1.4.1.2620.1.7.14.5.1 | ScalarmgIndexerInfoTotalReadLogs | not-accessible | current | Total Read Logs |
| 1.3.6.1.4.1.2620.1.7.14.5.2 | ScalarmgIndexerInfoTotalUpdatesAndLogsIndexed | not-accessible | current | Total Updates and Logs Indexed |
| 1.3.6.1.4.1.2620.1.7.14.5.3 | ScalarmgIndexerInfoTotalReadLogsErrors | not-accessible | current | Total Read Logs Errors |
| 1.3.6.1.4.1.2620.1.7.14.5.4 | ScalarmgIndexerInfoTotalUpdatesAndLogsIndexedErrors | not-accessible | current | Total Updates and Logs Indexed Errors |
| 1.3.6.1.4.1.2620.1.7.14.5.5 | ScalarmgIndexerInfoUpdatesAndLogsIndexedRate | not-accessible | current | Updates and Logs Indexed Rate |
| 1.3.6.1.4.1.2620.1.7.14.5.6 | ScalarmgIndexerInfoReadLogsRate | not-accessible | current | Read Logs Rate |
| 1.3.6.1.4.1.2620.1.7.14.5.7 | ScalarmgIndexerInfoUpdatesAndLogsIndexedRate10min | not-accessible | current | Updates and Logs Indexed Rate (10 min) |
| 1.3.6.1.4.1.2620.1.7.14.5.8 | ScalarmgIndexerInfoReadLogsRate10min | not-accessible | current | Read Logs Rate (10 min) |
| 1.3.6.1.4.1.2620.1.7.14.5.9 | ScalarmgIndexerInfoUpdatesAndLogsIndexedRate60min | not-accessible | current | Updates and Logs Indexed Rate (60 min) |
| 1.3.6.1.4.1.2620.1.7.14.5.10 | ScalarmgIndexerInfoReadLogsRate60min | not-accessible | current | Read Logs Rate (60 min) |
| 1.3.6.1.4.1.2620.1.7.14.5.11 | ScalarmgIndexerInfoUpdatesAndLogsIndexedRatePeak | not-accessible | current | Updates and Logs Indexed Rate Peak |
| 1.3.6.1.4.1.2620.1.7.14.5.12 | ScalarmgIndexerInfoReadLogsRatePeak | not-accessible | current | Read Logs Rate Peak |
| 1.3.6.1.4.1.2620.1.7.14.5.13 | ScalarmgIndexerInfoReadLogsDelay | not-accessible | current | Read Logs Delay |
| 1.3.6.1.4.1.2620.1.7.14.6 | ScalarmgLSLogReceiveRate1Hour | not-accessible | current | MGMT Log Server Log Receive Rate (Last Hour) |
| 1.3.6.1.4.1.2620.1.7.101 | ScalarmgStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.7.102 | ScalarmgStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.7.103 | ScalarmgStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.8 | Nodewam | |||
| 1.3.6.1.4.1.2620.1.8.1 | ScalarwamProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.8.2 | ScalarwamVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.8.3 | ScalarwamVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.8.4 | ScalarwamState | read-only | current | WAM state |
| 1.3.6.1.4.1.2620.1.8.5 | ScalarwamName | read-only | current | WAM name |
| 1.3.6.1.4.1.2620.1.8.6 | NodewamPluginPerformance | |||
| 1.3.6.1.4.1.2620.1.8.6.1 | ScalarwamAcceptReq | read-only | current | Plugin accepted requests |
| 1.3.6.1.4.1.2620.1.8.6.2 | ScalarwamRejectReq | read-only | current | Plugin rejected requests |
| 1.3.6.1.4.1.2620.1.8.7 | NodewamPolicy | |||
| 1.3.6.1.4.1.2620.1.8.7.1 | ScalarwamPolicyName | read-only | current | Policy name |
| 1.3.6.1.4.1.2620.1.8.7.2 | ScalarwamPolicyUpdate | read-only | current | Last update time |
| 1.3.6.1.4.1.2620.1.8.8 | NodewamUagQueries | |||
| 1.3.6.1.4.1.2620.1.8.8.1 | ScalarwamUagHost | read-only | current | UAG host name |
| 1.3.6.1.4.1.2620.1.8.8.2 | ScalarwamUagIp | read-only | current | UAG IP address |
| 1.3.6.1.4.1.2620.1.8.8.3 | ScalarwamUagPort | read-only | current | UAG port |
| 1.3.6.1.4.1.2620.1.8.8.4 | ScalarwamUagNoQueries | read-only | current | UAG no. of queries |
| 1.3.6.1.4.1.2620.1.8.8.5 | ScalarwamUagLastQuery | read-only | current | UAG last query time |
| 1.3.6.1.4.1.2620.1.8.9 | NodewamGlobalPerformance | |||
| 1.3.6.1.4.1.2620.1.8.9.1 | ScalarwamOpenSessions | read-only | current | Open sessions |
| 1.3.6.1.4.1.2620.1.8.9.2 | ScalarwamLastSession | read-only | current | Last open session time |
| 1.3.6.1.4.1.2620.1.8.101 | ScalarwamStatCode | read-only | current | WAM status code |
| 1.3.6.1.4.1.2620.1.8.102 | ScalarwamStatShortDescr | read-only | current | WAM status short description |
| 1.3.6.1.4.1.2620.1.8.103 | ScalarwamStatLongDescr | read-only | current | WAM status full description |
| 1.3.6.1.4.1.2620.1.9 | Nodedtps | |||
| 1.3.6.1.4.1.2620.1.9.1 | ScalardtpsProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.9.2 | ScalardtpsVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.9.3 | ScalardtpsVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.9.4 | ScalardtpsLicensedUsers | read-only | current | Licensed users |
| 1.3.6.1.4.1.2620.1.9.5 | ScalardtpsConnectedUsers | read-only | current | Connected users |
| 1.3.6.1.4.1.2620.1.9.101 | ScalardtpsStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.9.102 | ScalardtpsStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.9.103 | ScalardtpsStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.11 | Nodels | |||
| 1.3.6.1.4.1.2620.1.11.1 | ScalarlsProdName | read-only | current | Product name |
| 1.3.6.1.4.1.2620.1.11.2 | ScalarlsVerMajor | read-only | current | Major version |
| 1.3.6.1.4.1.2620.1.11.3 | ScalarlsVerMinor | read-only | current | Minor version |
| 1.3.6.1.4.1.2620.1.11.4 | ScalarlsBuildNumber | read-only | current | Build number |
| 1.3.6.1.4.1.2620.1.11.5 | ScalarlsFwmIsAlive | read-only | current | Log Server is alive |
| 1.3.6.1.4.1.2620.1.11.7 | TablelsConnectedClientsTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.11.7.1 | RowlsConnectedClientsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.11.7.1.1 | ColumnlsIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.7.1.2 | ColumnlsClientName | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.7.1.3 | ColumnlsClientHost | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.7.1.4 | ColumnlsClientDbLock | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.7.1.5 | ColumnlsApplicationType | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14 | NodelsLoggingInfo | |||
| 1.3.6.1.4.1.2620.1.11.14.1 | ScalarlsLogReceiveRate | not-accessible | current | Log Server Log Receive Rate |
| 1.3.6.1.4.1.2620.1.11.14.2 | ScalarlsLogReceiveRatePeak | not-accessible | current | Log Server Log Receive Rate Peak |
| 1.3.6.1.4.1.2620.1.11.14.3 | ScalarlsLogReceiveRate10Min | not-accessible | current | Log Server Log Receive Rate (Last 10 Minutes) |
| 1.3.6.1.4.1.2620.1.11.14.4 | TablelsConnectedGatewaysTable | not-accessible | current | Connected Gateways Table |
| 1.3.6.1.4.1.2620.1.11.14.4.1 | RowlsConnectedGatewaysEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.11.14.4.1.1 | ColumnlsGWIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14.4.1.2 | ColumnlsGWIP | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14.4.1.3 | ColumnlsGWState | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14.4.1.4 | ColumnlsGWLastLoginTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14.4.1.5 | ColumnlsGWLogReceiveRate | read-only | current | |
| 1.3.6.1.4.1.2620.1.11.14.5 | NodelsIndexerInfo | |||
| 1.3.6.1.4.1.2620.1.11.14.5.1 | ScalarlsIndexerInfoTotalReadLogs | not-accessible | current | Total Read Logs |
| 1.3.6.1.4.1.2620.1.11.14.5.2 | ScalarlsIndexerInfoTotalUpdatesAndLogsIndexed | not-accessible | current | Total Updates and Logs Indexed |
| 1.3.6.1.4.1.2620.1.11.14.5.3 | ScalarlsIndexerInfoTotalReadLogsErrors | not-accessible | current | Total Read Logs Errors |
| 1.3.6.1.4.1.2620.1.11.14.5.4 | ScalarlsIndexerInfoTotalUpdatesAndLogsIndexedErrors | not-accessible | current | Total Updates and Logs Indexed Errors |
| 1.3.6.1.4.1.2620.1.11.14.5.5 | ScalarlsIndexerInfoUpdatesAndLogsIndexedRate | not-accessible | current | Updates and Logs Indexed Rate |
| 1.3.6.1.4.1.2620.1.11.14.5.6 | ScalarlsIndexerInfoReadLogsRate | not-accessible | current | Read Logs Rate |
| 1.3.6.1.4.1.2620.1.11.14.5.7 | ScalarlsIndexerInfoUpdatesAndLogsIndexedRatePeak | not-accessible | current | Updates and Logs Indexed Rate Peak |
| 1.3.6.1.4.1.2620.1.11.14.5.8 | ScalarlsIndexerInfoReadLogsRatePeak | not-accessible | current | Read Logs Rate Peak |
| 1.3.6.1.4.1.2620.1.11.14.6 | ScalarlsLogReceiveRate1Hour | not-accessible | current | Log Server Log Receive Rate (Last Hour) |
| 1.3.6.1.4.1.2620.1.11.101 | ScalarlsStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.11.102 | ScalarlsStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.11.103 | ScalarlsStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.16 | Nodevsx | |||
| 1.3.6.1.4.1.2620.1.16.11 | ScalarvsxVsSupported | read-only | current | The maximum number of supported Virtual Systems |
| 1.3.6.1.4.1.2620.1.16.12 | ScalarvsxVsConfigured | read-only | current | The number of configured Virtual Systems |
| 1.3.6.1.4.1.2620.1.16.13 | ScalarvsxVsInstalled | read-only | current | The number of installed Virtual Systems |
| 1.3.6.1.4.1.2620.1.16.22 | NodevsxStatus | |||
| 1.3.6.1.4.1.2620.1.16.22.1 | TablevsxStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.22.1.1 | RowvsxStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.22.1.1.1 | ColumnvsxStatusVSId | read-only | current | Virtual System ID |
| 1.3.6.1.4.1.2620.1.16.22.1.1.2 | ColumnvsxStatusVRId | read-only | current | Operating System ID (VRF ID) |
| 1.3.6.1.4.1.2620.1.16.22.1.1.3 | ColumnvsxStatusVsName | read-only | current | Virtual System's name |
| 1.3.6.1.4.1.2620.1.16.22.1.1.4 | ColumnvsxStatusVsType | read-only | current | Virtual System's type |
| 1.3.6.1.4.1.2620.1.16.22.1.1.5 | ColumnvsxStatusMainIP | read-only | current | Virtual System's Main IP |
| 1.3.6.1.4.1.2620.1.16.22.1.1.6 | ColumnvsxStatusPolicyName | read-only | current | Security Policy name |
| 1.3.6.1.4.1.2620.1.16.22.1.1.7 | ColumnvsxStatusVsPolicyType | read-only | current | Security Policy type |
| 1.3.6.1.4.1.2620.1.16.22.1.1.8 | ColumnvsxStatusSicTrustState | read-only | current | SIC status |
| 1.3.6.1.4.1.2620.1.16.22.1.1.9 | ColumnvsxStatusHAState | read-only | current | High Availability Status |
| 1.3.6.1.4.1.2620.1.16.22.1.1.10 | ColumnvsxStatusVSWeight | read-only | current | Virtual System Resource Control Weight |
| 1.3.6.1.4.1.2620.1.16.22.2 | TablevsxStatusCPUUsageTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.22.2.1 | RowvsxStatusCPUUsageEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.22.2.1.1 | ColumnvsxStatusCPUUsage1sec | read-only | current | CPU usage (%) in the last 1 second, averaged for all cores |
| 1.3.6.1.4.1.2620.1.16.22.2.1.2 | ColumnvsxStatusCPUUsage10sec | read-only | current | CPU usage (%) in the last 10 seconds, averaged for all cores |
| 1.3.6.1.4.1.2620.1.16.22.2.1.3 | ColumnvsxStatusCPUUsage1min | read-only | current | CPU usage (%) in the last 1 minute, averaged for all cores |
| 1.3.6.1.4.1.2620.1.16.22.2.1.4 | ColumnvsxStatusCPUUsage1hr | read-only | current | CPU usage (%) in the last 1 hour, averaged for all cores |
| 1.3.6.1.4.1.2620.1.16.22.2.1.5 | ColumnvsxStatusCPUUsage24hr | read-only | current | CPU usage (%) in the last 24 hours, averaged for all cores |
| 1.3.6.1.4.1.2620.1.16.22.2.1.6 | ColumnvsxStatusCPUUsageVSId | read-only | current | Virtual System ID |
| 1.3.6.1.4.1.2620.1.16.23 | NodevsxCounters | |||
| 1.3.6.1.4.1.2620.1.16.23.1 | TablevsxCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.23.1.1 | RowvsxCountersEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.16.23.1.1.1 | ColumnvsxCountersVSId | read-only | current | Virtual System ID |
| 1.3.6.1.4.1.2620.1.16.23.1.1.2 | ColumnvsxCountersConnNum | read-only | current | Number of active connections |
| 1.3.6.1.4.1.2620.1.16.23.1.1.3 | ColumnvsxCountersConnPeakNum | read-only | current | Peak number of active connections |
| 1.3.6.1.4.1.2620.1.16.23.1.1.4 | ColumnvsxCountersConnTableLimit | read-only | current | Connection table limit |
| 1.3.6.1.4.1.2620.1.16.23.1.1.5 | ColumnvsxCountersPackets | read-only | current | Total number of packets processed |
| 1.3.6.1.4.1.2620.1.16.23.1.1.6 | ColumnvsxCountersDroppedTotal | read-only | current | Total number of dropped packets |
| 1.3.6.1.4.1.2620.1.16.23.1.1.7 | ColumnvsxCountersAcceptedTotal | read-only | current | Total number of accepted packets |
| 1.3.6.1.4.1.2620.1.16.23.1.1.8 | ColumnvsxCountersRejectedTotal | read-only | current | Total number of rejected packets |
| 1.3.6.1.4.1.2620.1.16.23.1.1.9 | ColumnvsxCountersBytesAcceptedTotal | read-only | current | Total number of accepted bytes |
| 1.3.6.1.4.1.2620.1.16.23.1.1.10 | ColumnvsxCountersBytesDroppedTotal | read-only | current | Total number of dropped bytes |
| 1.3.6.1.4.1.2620.1.16.23.1.1.11 | ColumnvsxCountersBytesRejectedTotal | read-only | current | Total number of rejected bytes |
| 1.3.6.1.4.1.2620.1.16.23.1.1.12 | ColumnvsxCountersLoggedTotal | read-only | current | Total number of logs sent |
| 1.3.6.1.4.1.2620.1.16.23.1.1.13 | ColumnvsxCountersIsDataValid | read-only | current | Data validity indicator invalid(0) valid(1) |
| 1.3.6.1.4.1.2620.1.17 | NodesmartDefense | |||
| 1.3.6.1.4.1.2620.1.17.1 | NodeasmAttacks | |||
| 1.3.6.1.4.1.2620.1.17.1.1 | NodeasmLayer3 | |||
| 1.3.6.1.4.1.2620.1.17.1.2 | NodeasmLayer4 | |||
| 1.3.6.1.4.1.2620.1.17.1.2.1 | NodeasmTCP | |||
| 1.3.6.1.4.1.2620.1.17.1.2.1.1 | NodeasmSynatk | |||
| 1.3.6.1.4.1.2620.1.17.1.2.1.1.1 | ScalarasmSynatkSynAckTimeout | read-only | current | SYN attack - Syn-Ack Timeout |
| 1.3.6.1.4.1.2620.1.17.1.2.1.1.2 | ScalarasmSynatkSynAckReset | read-only | current | SYN attack - Syn-Ack Reset |
| 1.3.6.1.4.1.2620.1.17.1.2.1.1.3 | ScalarasmSynatkModeChange | read-only | current | SYN attack - Mode Change |
| 1.3.6.1.4.1.2620.1.17.1.2.1.1.4 | ScalarasmSynatkCurrentMode | read-only | current | SYN attack - Current Mode |
| 1.3.6.1.4.1.2620.1.17.1.2.1.1.5 | ScalarasmSynatkNumberofunAckedSyns | read-only | current | SYN attack - Number of un-Acked Syns |
| 1.3.6.1.4.1.2620.1.17.1.2.1.2 | NodeasmSmallPmtu | |||
| 1.3.6.1.4.1.2620.1.17.1.2.1.2.1 | ScalarsmallPMTUNumberOfAttacks | read-only | current | Small PMTU - Number of attacks |
| 1.3.6.1.4.1.2620.1.17.1.2.1.2.2 | ScalarsmallPMTUValueOfMinimalMTUsize | read-only | current | Small PMTU - Value of Minimal MTU size |
| 1.3.6.1.4.1.2620.1.17.1.2.1.3 | NodeasmSeqval | |||
| 1.3.6.1.4.1.2620.1.17.1.2.1.3.1 | ScalarsequenceVerifierInvalidAck | read-only | current | Sequence Verifier - Invalid Ack |
| 1.3.6.1.4.1.2620.1.17.1.2.1.3.2 | ScalarsequenceVerifierInvalidSequence | read-only | current | Sequence Verifier - Invalid Sequence |
| 1.3.6.1.4.1.2620.1.17.1.2.1.3.3 | ScalarsequenceVerifierInvalidretransmit | read-only | current | Sequence Verifier - Invalid retransmit |
| 1.3.6.1.4.1.2620.1.17.1.2.2 | NodeasmUDP | |||
| 1.3.6.1.4.1.2620.1.17.1.2.3 | NodeasmScans | |||
| 1.3.6.1.4.1.2620.1.17.1.2.3.1 | NodeasmHostPortScan | |||
| 1.3.6.1.4.1.2620.1.17.1.2.3.1.1 | ScalarnumOfhostPortScan | read-only | current | host port scan |
| 1.3.6.1.4.1.2620.1.17.1.2.3.2 | NodeasmIPSweep | |||
| 1.3.6.1.4.1.2620.1.17.1.2.3.2.1 | ScalarnumOfIpSweep | read-only | current | host port scan |
| 1.3.6.1.4.1.2620.1.17.1.3 | NodeasmLayer5 | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1 | NodeasmHTTP | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1.1 | NodeasmHttpWorms | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1.1.1 | ScalarhttpWorms | read-only | current | HTTP worms |
| 1.3.6.1.4.1.2620.1.17.1.3.1.2 | NodeasmHttpFormatViolatoin | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1.2.1 | ScalarhttpURLLengthViolation | read-only | current | HTTP - URL Length Violations |
| 1.3.6.1.4.1.2620.1.17.1.3.1.2.2 | ScalarhttpHeaderLengthViolations | read-only | current | HTTP - Header Length Violations |
| 1.3.6.1.4.1.2620.1.17.1.3.1.2.3 | ScalarhttpMaxHeaderReached | read-only | current | HTTP - Maximum Headers Reached |
| 1.3.6.1.4.1.2620.1.17.1.3.1.3 | NodeasmHttpAsciiViolation | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1.3.1 | ScalarnumOfHttpASCIIViolations | read-only | current | HTTP - ASCII Violations |
| 1.3.6.1.4.1.2620.1.17.1.3.1.4 | NodeasmHttpP2PHeaderFilter | |||
| 1.3.6.1.4.1.2620.1.17.1.3.1.4.1 | ScalarnumOfHttpP2PHeaders | read-only | current | HTTP - Peer To Peer Headers |
| 1.3.6.1.4.1.2620.1.17.1.3.2 | NodeasmCIFS | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.1 | NodeasmCIFSWorms | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.1.1 | ScalarnumOfCIFSworms | read-only | current | num of CIFS worms |
| 1.3.6.1.4.1.2620.1.17.1.3.2.2 | NodeasmCIFSNullSession | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.2.1 | ScalarnumOfCIFSNullSessions | read-only | current | num of CIFS Null Sessions |
| 1.3.6.1.4.1.2620.1.17.1.3.2.3 | NodeasmCIFSBlockedPopUps | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.3.1 | ScalarnumOfCIFSBlockedPopUps | read-only | current | num of CIFS Blocked Pop-Ups |
| 1.3.6.1.4.1.2620.1.17.1.3.2.4 | NodeasmCIFSBlockedCommands | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.4.1 | ScalarnumOfCIFSBlockedCommands | read-only | current | num of CIFS Blocked Commands |
| 1.3.6.1.4.1.2620.1.17.1.3.2.5 | NodeasmCIFSPasswordLengthViolations | |||
| 1.3.6.1.4.1.2620.1.17.1.3.2.5.1 | ScalarnumOfCIFSPasswordLengthViolations | read-only | current | num of CIFS PasswordLength Violations |
| 1.3.6.1.4.1.2620.1.17.1.3.3 | NodeasmP2P | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.1 | NodeasmP2POtherConAttempts | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.1.1 | ScalarnumOfP2POtherConAttempts | read-only | current | num of P2P Other Con Attempts |
| 1.3.6.1.4.1.2620.1.17.1.3.3.2 | NodeasmP2PKazaaConAttempts | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.2.1 | ScalarnumOfP2PKazaaConAttempts | read-only | current | num of P2P Kazaa Con Attempts |
| 1.3.6.1.4.1.2620.1.17.1.3.3.3 | NodeasmP2PeMuleConAttempts | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.3.1 | ScalarnumOfP2PeMuleConAttempts | read-only | current | num of P2P eMule Con Attempts |
| 1.3.6.1.4.1.2620.1.17.1.3.3.4 | NodeasmP2PGnutellaConAttempts | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.4.1 | ScalarnumOfGnutellaConAttempts | read-only | current | num of P2P Gnutella Con Attempts |
| 1.3.6.1.4.1.2620.1.17.1.3.3.5 | NodeasmP2PSkypeCon | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.5.1 | ScalarnumOfP2PSkypeCon | read-only | current | num of P2P Skype Con |
| 1.3.6.1.4.1.2620.1.17.1.3.3.6 | NodeasmP2PBitTorrentCon | |||
| 1.3.6.1.4.1.2620.1.17.1.3.3.6.1 | ScalarnumOfBitTorrentCon | read-only | current | num of P2P Bit Torrent Con |
| 1.3.6.1.4.1.2620.1.24 | Nodeavi | |||
| 1.3.6.1.4.1.2620.1.24.1 | NodeaviEngines | |||
| 1.3.6.1.4.1.2620.1.24.1.1 | TableaviEngineTable | not-accessible | current | Table of Anti Virus engines installed. Each engine entry contains information about this engine. |
| 1.3.6.1.4.1.2620.1.24.1.1.1 | RowaviEngineEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.1 | ColumnaviEngineIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.2 | ColumnaviEngineName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.3 | ColumnaviEngineVer | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.4 | ColumnaviEngineDate | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.5 | ColumnaviSignatureName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.6 | ColumnaviSignatureVer | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.7 | ColumnaviSignatureDate | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.8 | ColumnaviLastSigCheckTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.9 | ColumnaviLastSigLocation | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.1.1.1.10 | ColumnaviLastLicExp | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.2 | NodeaviTopViruses | |||
| 1.3.6.1.4.1.2620.1.24.2.1 | TableaviTopVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found in the last hour |
| 1.3.6.1.4.1.2620.1.24.2.1.1 | RowaviTopVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.2.1.1.1 | ColumnaviTopVirusesIndex | read-only | current | Virus index |
| 1.3.6.1.4.1.2620.1.24.2.1.1.2 | ColumnaviTopVirusesName | read-only | current | Virus Name |
| 1.3.6.1.4.1.2620.1.24.2.1.1.3 | ColumnaviTopVirusesCnt | read-only | current | Virus hit count |
| 1.3.6.1.4.1.2620.1.24.3 | NodeaviTopEverViruses | |||
| 1.3.6.1.4.1.2620.1.24.3.1 | TableaviTopEverVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found from last system restart |
| 1.3.6.1.4.1.2620.1.24.3.1.1 | RowaviTopEverVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.3.1.1.1 | ColumnaviTopEverVirusesIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.3.1.1.2 | ColumnaviTopEverVirusesName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.3.1.1.3 | ColumnaviTopEverVirusesCnt | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4 | NodeaviServices | |||
| 1.3.6.1.4.1.2620.1.24.4.1 | NodeaviServicesHTTP | |||
| 1.3.6.1.4.1.2620.1.24.4.1.1 | ScalaraviHTTPState | read-only | current | State of the Anti Virus engine that inspects HTTP |
| 1.3.6.1.4.1.2620.1.24.4.1.2 | ScalaraviHTTPLastVirusName | read-only | current | Last virus found over HTTP |
| 1.3.6.1.4.1.2620.1.24.4.1.3 | ScalaraviHTTPLastVirusTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.1.4 | TableaviHTTPTopVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found over HTTP in the last day or from last system restart (the latest of the two) |
| 1.3.6.1.4.1.2620.1.24.4.1.4.1 | RowaviHTTPTopVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.4.1.4.1.1 | ColumnaviHTTPTopVirusesIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.1.4.1.2 | ColumnaviHTTPTopVirusesName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.1.4.1.3 | ColumnaviHTTPTopVirusesCnt | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.2 | NodeaviServicesFTP | |||
| 1.3.6.1.4.1.2620.1.24.4.2.1 | ScalaraviFTPState | read-only | current | State of the Anti Virus engine that inspects FTP |
| 1.3.6.1.4.1.2620.1.24.4.2.2 | ScalaraviFTPLastVirusName | read-only | current | Last virus found over FTP |
| 1.3.6.1.4.1.2620.1.24.4.2.3 | ScalaraviFTPLastVirusTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.2.4 | TableaviFTPTopVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found over FTP in the last day or from last system restart (the latest of the two) |
| 1.3.6.1.4.1.2620.1.24.4.2.4.1 | RowaviFTPTopVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.4.2.4.1.1 | ColumnaviFTPTopVirusesIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.2.4.1.2 | ColumnaviFTPTopVirusesName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.2.4.1.3 | ColumnaviFTPTopVirusesCnt | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.3 | NodeaviServicesSMTP | |||
| 1.3.6.1.4.1.2620.1.24.4.3.1 | ScalaraviSMTPState | read-only | current | State of the Anti Virus engine that inspects SMTP |
| 1.3.6.1.4.1.2620.1.24.4.3.2 | ScalaraviSMTPLastVirusName | read-only | current | Last virus found over SMTP |
| 1.3.6.1.4.1.2620.1.24.4.3.3 | ScalaraviSMTPLastVirusTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.3.4 | TableaviSMTPTopVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found over SMTP in the last day or from last system restart (the latest of the two) |
| 1.3.6.1.4.1.2620.1.24.4.3.4.1 | RowaviSMTPTopVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.4.3.4.1.1 | ColumnaviSMTPTopVirusesIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.3.4.1.2 | ColumnaviSMTPTopVirusesName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.3.4.1.3 | ColumnaviSMTPTopVirusesCnt | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.4 | NodeaviServicesPOP3 | |||
| 1.3.6.1.4.1.2620.1.24.4.4.1 | ScalaraviPOP3State | read-only | current | State of the Anti Virus engine that inspects POP3 |
| 1.3.6.1.4.1.2620.1.24.4.4.2 | ScalaraviPOP3LastVirusName | read-only | current | Last virus found over POP3 |
| 1.3.6.1.4.1.2620.1.24.4.4.3 | ScalaraviPOP3LastVirusTime | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.4.4 | TableaviPOP3TopVirusesTable | not-accessible | current | Table for virus count of the most frequent viruses found over POP3 in the last day or from last system restart (the latest of the two) |
| 1.3.6.1.4.1.2620.1.24.4.4.4.1 | RowaviPOP3TopVirusesEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.24.4.4.4.1.1 | ColumnaviPOP3TopVirusesIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.4.4.1.2 | ColumnaviPOP3TopVirusesName | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.4.4.4.1.3 | ColumnaviPOP3TopVirusesCnt | read-only | current | |
| 1.3.6.1.4.1.2620.1.24.101 | ScalaraviStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.24.102 | ScalaraviStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.24.103 | ScalaraviStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.25 | NodeeventiaAnalyzer | |||
| 1.3.6.1.4.1.2620.1.25.1 | Nodecpsemd | |||
| 1.3.6.1.4.1.2620.1.25.1.1 | ScalarcpsemdProcAlive | read-only | current | cpsemd Process is alive |
| 1.3.6.1.4.1.2620.1.25.1.2 | ScalarcpsemdNewEventsHandled | read-only | current | New events handled |
| 1.3.6.1.4.1.2620.1.25.1.3 | ScalarcpsemdUpdatesHandled | read-only | current | Number of updates handled |
| 1.3.6.1.4.1.2620.1.25.1.4 | ScalarcpsemdLastEventTime | read-only | current | Last processed event time |
| 1.3.6.1.4.1.2620.1.25.1.5 | ScalarcpsemdCurrentDBSize | read-only | current | Current database size |
| 1.3.6.1.4.1.2620.1.25.1.6 | ScalarcpsemdDBCapacity | read-only | current | Database capacity |
| 1.3.6.1.4.1.2620.1.25.1.7 | ScalarcpsemdNumEvents | read-only | current | Number of events in database |
| 1.3.6.1.4.1.2620.1.25.1.8 | ScalarcpsemdDBDiskSpace | read-only | current | Available database disk space |
| 1.3.6.1.4.1.2620.1.25.1.9 | TablecpsemdCorrelationUnitTable | not-accessible | current | Table for Correlation Units details |
| 1.3.6.1.4.1.2620.1.25.1.9.1 | RowcpsemdCorrelationUnitEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.25.1.9.1.1 | ColumncpsemdCorrelationUnitIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.25.1.9.1.2 | ColumncpsemdCorrelationUnitIP | read-only | current | Correlation Unit IP |
| 1.3.6.1.4.1.2620.1.25.1.9.1.3 | ColumncpsemdCorrelationUnitLastRcvdTime | read-only | current | Time of last received event |
| 1.3.6.1.4.1.2620.1.25.1.9.1.4 | ColumncpsemdCorrelationUnitNumEventsRcvd | read-only | current | Number of events received |
| 1.3.6.1.4.1.2620.1.25.1.9.1.5 | ColumncpsemdConnectionDuration | read-only | current | Connection duration (to the Correlation Unit) |
| 1.3.6.1.4.1.2620.1.25.1.10 | ScalarcpsemdDBIsFull | read-only | current | 1 - Database is full; 0 - Database is not full |
| 1.3.6.1.4.1.2620.1.25.1.101 | ScalarcpsemdStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.25.1.102 | ScalarcpsemdStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.25.1.103 | ScalarcpsemdStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.25.2 | Nodecpsead | |||
| 1.3.6.1.4.1.2620.1.25.2.1 | ScalarcpseadProcAlive | read-only | current | cpsead Process is alive |
| 1.3.6.1.4.1.2620.1.25.2.2 | ScalarcpseadConnectedToSem | read-only | current | Connected to SEM (is the Correlation Unit connected to the Analyzer Server) |
| 1.3.6.1.4.1.2620.1.25.2.3 | ScalarcpseadNumProcessedLogs | read-only | current | Number of logs processed |
| 1.3.6.1.4.1.2620.1.25.2.4 | TablecpseadJobsTable | not-accessible | current | Jobs Table |
| 1.3.6.1.4.1.2620.1.25.2.4.1 | RowcpseadJobsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.25.2.4.1.1 | ColumncpseadJobIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.25.2.4.1.2 | ColumncpseadJobID | read-only | current | Job ID |
| 1.3.6.1.4.1.2620.1.25.2.4.1.3 | ColumncpseadJobName | read-only | current | Job name |
| 1.3.6.1.4.1.2620.1.25.2.4.1.4 | ColumncpseadJobState | read-only | current | Job state |
| 1.3.6.1.4.1.2620.1.25.2.4.1.5 | ColumncpseadJobIsOnline | read-only | current | Is job online |
| 1.3.6.1.4.1.2620.1.25.2.4.1.6 | ColumncpseadJobLogServer | read-only | current | Log Server (the IP of the log server from which the job is reading logs) |
| 1.3.6.1.4.1.2620.1.25.2.4.1.7 | ColumncpseadJobDataType | read-only | current | Data type (the type of date being read: log or audit) |
| 1.3.6.1.4.1.2620.1.25.2.4.1.8 | ColumncpseadConnectedToLogServer | read-only | current | Connected to Log Server (is the Correlation Unit connected to the Log Server) |
| 1.3.6.1.4.1.2620.1.25.2.4.1.9 | ColumncpseadNumAnalyzedLogs | read-only | current | Number of logs analyzed |
| 1.3.6.1.4.1.2620.1.25.2.4.1.10 | ColumncpseadFileName | read-only | current | File Name (the name of the file from which the job is reading logs) |
| 1.3.6.1.4.1.2620.1.25.2.4.1.11 | ColumncpseadFileCurrentPosition | read-only | current | current position in the file |
| 1.3.6.1.4.1.2620.1.25.2.4.1.12 | ColumncpseadStateDescriptionCode | read-only | current | state description code (code for the state description in the next OID) |
| 1.3.6.1.4.1.2620.1.25.2.4.1.13 | ColumncpseadStateDescription | read-only | current | state description (provides more info regarding the job's state (OID 4), for instance details errors.) |
| 1.3.6.1.4.1.2620.1.25.2.5 | ScalarcpseadNoFreeDiskSpace | read-only | current | no free disk space (is there not enough free disk space on the Correlation Unit) |
| 1.3.6.1.4.1.2620.1.25.2.101 | ScalarcpseadStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.25.2.102 | ScalarcpseadStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.25.2.103 | ScalarcpseadStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.29 | Nodeuf | |||
| 1.3.6.1.4.1.2620.1.29.1 | NodeufEngine | |||
| 1.3.6.1.4.1.2620.1.29.1.1 | ScalarufEngineName | read-only | current | Engine name |
| 1.3.6.1.4.1.2620.1.29.1.2 | ScalarufEngineVer | read-only | current | Engine version |
| 1.3.6.1.4.1.2620.1.29.1.3 | ScalarufEngineDate | read-only | current | Engine build date |
| 1.3.6.1.4.1.2620.1.29.1.4 | ScalarufSignatureDate | read-only | current | Creation date of the signature-set used by the engine |
| 1.3.6.1.4.1.2620.1.29.1.5 | ScalarufSignatureVer | read-only | current | Version of the signature |
| 1.3.6.1.4.1.2620.1.29.1.6 | ScalarufLastSigCheckTime | read-only | current | Last time there was a check for new signature |
| 1.3.6.1.4.1.2620.1.29.1.7 | ScalarufLastSigLocation | read-only | current | Last signature origine (either from Remote site or from SmartCenter) |
| 1.3.6.1.4.1.2620.1.29.1.8 | ScalarufLastLicExp | read-only | current | Expiration date of the subscription for Web Filtering updates |
| 1.3.6.1.4.1.2620.1.29.2 | NodeufSS | |||
| 1.3.6.1.4.1.2620.1.29.2.1 | ScalarufIsMonitor | read-only | current | Monitor-Only Running mode (ON or OFF) |
| 1.3.6.1.4.1.2620.1.29.2.2 | ScalarufScannedCnt | read-only | current | Total number of scanned URLs |
| 1.3.6.1.4.1.2620.1.29.2.3 | ScalarufBlockedCnt | read-only | current | Number of blocked URLs |
| 1.3.6.1.4.1.2620.1.29.2.4 | TableufTopBlockedCatTable | not-accessible | current | Table for counting of the most frequent categories blocked in the last day |
| 1.3.6.1.4.1.2620.1.29.2.4.1 | RowufTopBlockedCatEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.29.2.4.1.1 | ColumnufTopBlockedCatIndex | read-only | current | Blocked Category index |
| 1.3.6.1.4.1.2620.1.29.2.4.1.2 | ColumnufTopBlockedCatName | read-only | current | Blocked Category name |
| 1.3.6.1.4.1.2620.1.29.2.4.1.3 | ColumnufTopBlockedCatCnt | read-only | current | Blocked Category count |
| 1.3.6.1.4.1.2620.1.29.2.5 | TableufTopBlockedSiteTable | not-accessible | current | Table for counting of the most frequent sites blocked in the last day |
| 1.3.6.1.4.1.2620.1.29.2.5.1 | RowufTopBlockedSiteEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.29.2.5.1.1 | ColumnufTopBlockedSiteIndex | read-only | current | Blocked URL index |
| 1.3.6.1.4.1.2620.1.29.2.5.1.2 | ColumnufTopBlockedSiteName | read-only | current | Blocked URL name |
| 1.3.6.1.4.1.2620.1.29.2.5.1.3 | ColumnufTopBlockedSiteCnt | read-only | current | Blocked URL count |
| 1.3.6.1.4.1.2620.1.29.2.6 | TableufTopBlockedUserTable | not-accessible | current | Table for counting blocked URLs of the most frequent blocked users in the last day |
| 1.3.6.1.4.1.2620.1.29.2.6.1 | RowufTopBlockedUserEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.29.2.6.1.1 | ColumnufTopBlockedUserIndex | read-only | current | Blocked User index |
| 1.3.6.1.4.1.2620.1.29.2.6.1.2 | ColumnufTopBlockedUserName | read-only | current | Blocked User name |
| 1.3.6.1.4.1.2620.1.29.2.6.1.3 | ColumnufTopBlockedUserCnt | read-only | current | Blocked User count |
| 1.3.6.1.4.1.2620.1.29.101 | ScalarufStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.29.102 | ScalarufStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.29.103 | ScalarufStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.30 | Nodems | |||
| 1.3.6.1.4.1.2620.1.30.1 | ScalarmsProductName | read-only | current | Product Name |
| 1.3.6.1.4.1.2620.1.30.2 | ScalarmsMajorVersion | read-only | current | Major Version |
| 1.3.6.1.4.1.2620.1.30.3 | ScalarmsMinorVersion | read-only | current | Minor Version |
| 1.3.6.1.4.1.2620.1.30.4 | ScalarmsBuildNumber | read-only | current | Build Number |
| 1.3.6.1.4.1.2620.1.30.5 | ScalarmsVersionStr | read-only | current | Version String |
| 1.3.6.1.4.1.2620.1.30.6 | NodemsSpam | |||
| 1.3.6.1.4.1.2620.1.30.6.1 | ScalarmsSpamNumScannedEmails | read-only | current | Number of scanned emails |
| 1.3.6.1.4.1.2620.1.30.6.2 | ScalarmsSpamNumSpamEmails | read-only | current | Number of spam emails |
| 1.3.6.1.4.1.2620.1.30.6.3 | ScalarmsSpamNumHandledSpamEmails | read-only | current | Number of handled spam emails |
| 1.3.6.1.4.1.2620.1.30.6.4 | NodemsSpamControls | |||
| 1.3.6.1.4.1.2620.1.30.6.4.1 | ScalarmsSpamControlsSpamEngine | read-only | current | Number of spam emails by Anti Spam engine |
| 1.3.6.1.4.1.2620.1.30.6.4.2 | ScalarmsSpamControlsIpRepuatation | read-only | current | Number of spam emails by IP reputation service |
| 1.3.6.1.4.1.2620.1.30.6.4.3 | ScalarmsSpamControlsSPF | read-only | current | Number of spam emails by SPF |
| 1.3.6.1.4.1.2620.1.30.6.4.4 | ScalarmsSpamControlsDomainKeys | read-only | current | Number of spam emails by Domain Keys |
| 1.3.6.1.4.1.2620.1.30.6.4.5 | ScalarmsSpamControlsRDNS | read-only | current | Number of spam emails by Reverse DNS |
| 1.3.6.1.4.1.2620.1.30.6.4.6 | ScalarmsSpamControlsRBL | read-only | current | Number of spam emails by RBLs (Including Received headers and URLs) |
| 1.3.6.1.4.1.2620.1.30.7 | ScalarmsExpirationDate | read-only | current | Subscription expiration date |
| 1.3.6.1.4.1.2620.1.30.8 | ScalarmsEngineVer | read-only | current | Anti Spam Engine Version |
| 1.3.6.1.4.1.2620.1.30.9 | ScalarmsEngineDate | read-only | current | Anti Spam Engine Build Date |
| 1.3.6.1.4.1.2620.1.30.101 | ScalarmsStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.30.102 | ScalarmsStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.30.103 | ScalarmsStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.30.999 | ScalarmsServicePack | read-only | current | Service Pack |
| 1.3.6.1.4.1.2620.1.31 | Nodevoip | |||
| 1.3.6.1.4.1.2620.1.31.1 | ScalarvoipProductName | read-only | current | Product Name |
| 1.3.6.1.4.1.2620.1.31.2 | ScalarvoipMajorVersion | read-only | current | Major Version |
| 1.3.6.1.4.1.2620.1.31.3 | ScalarvoipMinorVersion | read-only | current | Minor Version |
| 1.3.6.1.4.1.2620.1.31.4 | ScalarvoipBuildNumber | read-only | current | Build Number |
| 1.3.6.1.4.1.2620.1.31.5 | ScalarvoipVersionStr | read-only | current | Version String |
| 1.3.6.1.4.1.2620.1.31.6 | NodevoipDOS | |||
| 1.3.6.1.4.1.2620.1.31.6.1 | NodevoipDOSSip | |||
| 1.3.6.1.4.1.2620.1.31.6.1.1 | NodevoipDOSSipNetwork | |||
| 1.3.6.1.4.1.2620.1.31.6.1.1.1 | ScalarvoipDOSSipNetworkReqInterval | read-only | current | Total Number of SIP Requests to The Internal Network per Interval: Interval (seconds) |
| 1.3.6.1.4.1.2620.1.31.6.1.1.2 | ScalarvoipDOSSipNetworkReqConfThreshold | read-only | current | Total Number of SIP Requests to The Internal Network per Interval: Configured Threshold |
| 1.3.6.1.4.1.2620.1.31.6.1.1.3 | ScalarvoipDOSSipNetworkReqCurrentVal | read-only | current | Total Number of SIP Requests to The Internal Network per Interval: Current Value |
| 1.3.6.1.4.1.2620.1.31.6.1.1.4 | ScalarvoipDOSSipNetworkRegInterval | read-only | current | Total number of 'REGISTER' Requests to The Internal Network per Interval: Interval (seconds) |
| 1.3.6.1.4.1.2620.1.31.6.1.1.5 | ScalarvoipDOSSipNetworkRegConfThreshold | read-only | current | Total number of 'REGISTER' Requests to The Internal Network per Interval: Configured Threshold |
| 1.3.6.1.4.1.2620.1.31.6.1.1.6 | ScalarvoipDOSSipNetworkRegCurrentVal | read-only | current | Total number of 'REGISTER' Requests to The Internal Network per Interval: Current Value |
| 1.3.6.1.4.1.2620.1.31.6.1.1.7 | ScalarvoipDOSSipNetworkCallInitInterval | read-only | current | Total Number of SIP Call Initiations to The Internal Network per Interval: Interval (seconds) |
| 1.3.6.1.4.1.2620.1.31.6.1.1.8 | ScalarvoipDOSSipNetworkCallInitConfThreshold | read-only | current | Total Number of SIP Call Initiations to The Internal Network per Interval: Configured Threshold |
| 1.3.6.1.4.1.2620.1.31.6.1.1.9 | ScalarvoipDOSSipNetworkCallInitICurrentVal | read-only | current | Total Number of SIP Call Initiations to The Internal Network per Interval: Current Value |
| 1.3.6.1.4.1.2620.1.31.6.1.2 | TablevoipDOSSipRateLimitingTable | not-accessible | current | Table for counting blocked URLs of the most frequent blocked users in the last day |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1 | RowvoipDOSSipRateLimitingEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.1 | ColumnvoipDOSSipRateLimitingTableIndex | read-only | current | Rate Limiting Defense for Internal SIP Servers: Table Index |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.2 | ColumnvoipDOSSipRateLimitingTableIpAddress | read-only | current | Rate Limiting Defense for Internal SIP Servers: Ip Address |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.3 | ColumnvoipDOSSipRateLimitingTableInterval | read-only | current | Rate Limiting Defense for Internal SIP Servers: Interval (Seconds) |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.4 | ColumnvoipDOSSipRateLimitingTableConfThreshold | read-only | current | Rate Limiting Defense for Internal SIP Servers: Configured Threshold for Number of SIP Requests |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.5 | ColumnvoipDOSSipRateLimitingTableNumDOSSipRequests | read-only | current | Rate Limiting Defense for Internal SIP Servers: Number of SIP Requests |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.6 | ColumnvoipDOSSipRateLimitingTableNumTrustedRequests | read-only | current | Rate Limiting Defense for Internal SIP Servers: Number of SIP Requests from Trusted Users |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.7 | ColumnvoipDOSSipRateLimitingTableNumNonTrustedRequests | read-only | current | Rate Limiting Defense for Internal SIP Servers: Number of SIP Requests from Non-Trusted Users |
| 1.3.6.1.4.1.2620.1.31.6.1.2.1.8 | ColumnvoipDOSSipRateLimitingTableNumRequestsfromServers | read-only | current | Rate Limiting Defense for Internal SIP Servers: Number of SIP Requests from Non-Trusted Users |
| 1.3.6.1.4.1.2620.1.31.7 | NodevoipCAC | |||
| 1.3.6.1.4.1.2620.1.31.7.1 | NodevoipCACConcurrentCalls | |||
| 1.3.6.1.4.1.2620.1.31.7.1.1 | ScalarvoipCACConcurrentCallsConfThreshold | read-only | current | Number of Concurrent Calls: Configured Threshold |
| 1.3.6.1.4.1.2620.1.31.7.1.2 | ScalarvoipCACConcurrentCallsCurrentVal | read-only | current | Number of Concurrent Calls: Configured Threshold |
| 1.3.6.1.4.1.2620.1.31.101 | ScalarvoipStatCode | read-only | current | Status code |
| 1.3.6.1.4.1.2620.1.31.102 | ScalarvoipStatShortDescr | read-only | current | Status short description |
| 1.3.6.1.4.1.2620.1.31.103 | ScalarvoipStatLongDescr | read-only | current | Status long description |
| 1.3.6.1.4.1.2620.1.31.999 | ScalarvoipServicePack | read-only | current | Service Pack |
| 1.3.6.1.4.1.2620.1.36 | Nodesxl | |||
| 1.3.6.1.4.1.2620.1.36.1 | NodefwSXLGroup | |||
| 1.3.6.1.4.1.2620.1.36.1.1 | ScalarfwSXLStatus | read-only | current | The current status of SecureXL. |
| 1.3.6.1.4.1.2620.1.36.1.2 | ScalarfwSXLConnsExisting | read-only | current | The number of existing connections handled by SecureXL. |
| 1.3.6.1.4.1.2620.1.36.1.3 | ScalarfwSXLConnsAdded | read-only | current | The number of connections added by SecureXL. |
| 1.3.6.1.4.1.2620.1.36.1.4 | ScalarfwSXLConnsDeleted | read-only | current | The number of connections deleted by SecureXL. |
| 1.3.6.1.4.1.2620.1.38 | NodeidentityAwareness | |||
| 1.3.6.1.4.1.2620.1.38.1 | ScalaridentityAwarenessProductName | read-only | current | Product Name |
| 1.3.6.1.4.1.2620.1.38.2 | ScalaridentityAwarenessAuthUsers | read-only | current | Number of users authenticated to the gateway |
| 1.3.6.1.4.1.2620.1.38.3 | ScalaridentityAwarenessUnAuthUsers | read-only | current | Number of unauthenticated guests |
| 1.3.6.1.4.1.2620.1.38.4 | ScalaridentityAwarenessAuthUsersKerberos | read-only | current | Number of authenticated users by Kerberos method |
| 1.3.6.1.4.1.2620.1.38.5 | ScalaridentityAwarenessAuthMachKerberos | read-only | current | Number of authenticated machines by Kerberos method |
| 1.3.6.1.4.1.2620.1.38.6 | ScalaridentityAwarenessAuthUsersPass | read-only | current | Number of authenticated users by User name and password method |
| 1.3.6.1.4.1.2620.1.38.7 | ScalaridentityAwarenessAuthUsersADQuery | read-only | current | Number of authenticated users by ADQuery method |
| 1.3.6.1.4.1.2620.1.38.8 | ScalaridentityAwarenessAuthMachADQuery | read-only | current | Number of authenticated machines by ADQuery method |
| 1.3.6.1.4.1.2620.1.38.9 | ScalaridentityAwarenessLoggedInAgent | read-only | current | Number of users that are logged in with agents |
| 1.3.6.1.4.1.2620.1.38.10 | ScalaridentityAwarenessLoggedInCaptivePortal | read-only | current | Number of users that are logged in with Captive Portal |
| 1.3.6.1.4.1.2620.1.38.11 | ScalaridentityAwarenessLoggedInADQuery | read-only | current | Number of users that are logged in with ADQuery |
| 1.3.6.1.4.1.2620.1.38.12 | ScalaridentityAwarenessAntiSpoffProtection | read-only | current | Number of users with an active Traffic Anti-Spoffing protection |
| 1.3.6.1.4.1.2620.1.38.13 | ScalaridentityAwarenessSuccUserLoginKerberos | read-only | current | Number of successfull Kerberos user login attempts |
| 1.3.6.1.4.1.2620.1.38.14 | ScalaridentityAwarenessSuccMachLoginKerberos | read-only | current | Number of successfull Kerberos machine login attempts |
| 1.3.6.1.4.1.2620.1.38.15 | ScalaridentityAwarenessSuccUserLoginPass | read-only | current | Number of successfull User Name And Password login attempts |
| 1.3.6.1.4.1.2620.1.38.16 | ScalaridentityAwarenessSuccUserLoginADQuery | read-only | current | Number of successfull ADQuery user login attempts |
| 1.3.6.1.4.1.2620.1.38.17 | ScalaridentityAwarenessSuccMachLoginADQuery | read-only | current | Number of successfull ADQuery machine login attempts |
| 1.3.6.1.4.1.2620.1.38.18 | ScalaridentityAwarenessUnSuccUserLoginKerberos | read-only | current | Number of unsuccessfull Kerberos user login attempts |
| 1.3.6.1.4.1.2620.1.38.19 | ScalaridentityAwarenessUnSuccMachLoginKerberos | read-only | current | Number of unsuccessfull Kerberos machine login attempts |
| 1.3.6.1.4.1.2620.1.38.20 | ScalaridentityAwarenessUnSuccUserLoginPass | read-only | current | Number of unsuccessfull User Name And Password login attempts |
| 1.3.6.1.4.1.2620.1.38.21 | ScalaridentityAwarenessSuccUserLDAP | read-only | current | Number of successful LDAP queries |
| 1.3.6.1.4.1.2620.1.38.22 | ScalaridentityAwarenessUnSuccUserLDAP | read-only | current | Number of unsuccessful LDAP queries |
| 1.3.6.1.4.1.2620.1.38.23 | ScalaridentityAwarenessDataTrans | read-only | current | How much data did gateway transmitted |
| 1.3.6.1.4.1.2620.1.38.24 | TableidentityAwarenessDistributedEnvTable | not-accessible | current | Table for distributed environments |
| 1.3.6.1.4.1.2620.1.38.24.1 | RowidentityAwarenessDistributedEnvEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.38.24.1.1 | ColumnidentityAwarenessDistributedEnvTableIndex | read-only | current | Distributed Environments: Table Index |
| 1.3.6.1.4.1.2620.1.38.24.1.2 | ColumnidentityAwarenessDistributedEnvTableGwName | read-only | current | Distributed Environments: GW Name |
| 1.3.6.1.4.1.2620.1.38.24.1.3 | ColumnidentityAwarenessDistributedEnvTableDisconnections | read-only | current | Distributed Environments: Number of disconnections |
| 1.3.6.1.4.1.2620.1.38.24.1.4 | ColumnidentityAwarenessDistributedEnvTableBruteForceAtt | read-only | current | Distributed Environments: Number of brute force attack detected |
| 1.3.6.1.4.1.2620.1.38.24.1.5 | ColumnidentityAwarenessDistributedEnvTableStatus | read-only | current | Distributed Environments: Status Possible values include: Ok 1 Warning 2 Error 4 |
| 1.3.6.1.4.1.2620.1.38.24.1.6 | ColumnidentityAwarenessDistributedEnvTableIsLocal | read-only | current | Distributed Environments: Is local Possible values include: False 0 True 1 |
| 1.3.6.1.4.1.2620.1.38.25 | TableidentityAwarenessADQueryStatusTable | not-accessible | current | Table for AD Query status |
| 1.3.6.1.4.1.2620.1.38.25.1 | RowidentityAwarenessADQueryStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.38.25.1.1 | ColumnidentityAwarenessADQueryStatusTableIndex | read-only | current | AD Query Status: Table Index |
| 1.3.6.1.4.1.2620.1.38.25.1.2 | ColumnidentityAwarenessADQueryStatusCurrStatus | read-only | current | AD Query Status: Current status Possible values include: Ok 0 Bad Credentials 1 Connectivity Error 2 Internal Error 3 Connection Time Out 4 |
| 1.3.6.1.4.1.2620.1.38.25.1.3 | ColumnidentityAwarenessADQueryStatusDomainName | read-only | current | AD Query Status: Domain name |
| 1.3.6.1.4.1.2620.1.38.25.1.4 | ColumnidentityAwarenessADQueryStatusDomainIP | read-only | current | AD Query Status: Domain IP |
| 1.3.6.1.4.1.2620.1.38.25.1.5 | ColumnidentityAwarenessADQueryStatusEvents | read-only | current | AD Query Status: Number of events |
| 1.3.6.1.4.1.2620.1.38.101 | ScalaridentityAwarenessStatus | read-only | current | Identity Awarness Status code |
| 1.3.6.1.4.1.2620.1.38.102 | ScalaridentityAwarenessStatusShortDesc | read-only | current | Identity Awarness Status - Short Description |
| 1.3.6.1.4.1.2620.1.38.103 | ScalaridentityAwarenessStatusLongDesc | read-only | current | Identity Awarness Status - Long Description |
| 1.3.6.1.4.1.2620.1.39 | NodeapplicationControl | |||
| 1.3.6.1.4.1.2620.1.39.1 | NodeapplicationControlSubscription | |||
| 1.3.6.1.4.1.2620.1.39.1.1 | ScalarapplicationControlSubscriptionStatus | read-only | current | Subscription status Possible values include: valid, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.39.1.2 | ScalarapplicationControlSubscriptionExpDate | read-only | current | Application Control subscription expiration date |
| 1.3.6.1.4.1.2620.1.39.1.3 | ScalarapplicationControlSubscriptionDesc | read-only | current | Subscription description |
| 1.3.6.1.4.1.2620.1.39.2 | NodeapplicationControlUpdate | |||
| 1.3.6.1.4.1.2620.1.39.2.1 | ScalarapplicationControlUpdateStatus | read-only | current | Update status Possible values include: failed, up-to-date, new, degrade, unknown |
| 1.3.6.1.4.1.2620.1.39.2.2 | ScalarapplicationControlUpdateDesc | read-only | current | Update description |
| 1.3.6.1.4.1.2620.1.39.2.3 | ScalarapplicationControlNextUpdate | read-only | current | Next update description |
| 1.3.6.1.4.1.2620.1.39.2.4 | ScalarapplicationControlVersion | read-only | current | Application Control database version |
| 1.3.6.1.4.1.2620.1.39.101 | ScalarapplicationControlStatusCode | read-only | current | Application Control Status code |
| 1.3.6.1.4.1.2620.1.39.102 | ScalarapplicationControlStatusShortDesc | read-only | current | Application Control Status - Short Description |
| 1.3.6.1.4.1.2620.1.39.103 | ScalarapplicationControlStatusLongDesc | read-only | current | Application Control Status - Long Description |
| 1.3.6.1.4.1.2620.1.42 | Nodethresholds | |||
| 1.3.6.1.4.1.2620.1.42.1 | ScalarthresholdPolicy | read-only | current | The name of the policy |
| 1.3.6.1.4.1.2620.1.42.2 | ScalarthresholdState | read-only | current | State of the thresholds engine: Ok (1), Error (0) |
| 1.3.6.1.4.1.2620.1.42.3 | ScalarthresholdStateDesc | read-only | current | Description for the state |
| 1.3.6.1.4.1.2620.1.42.4 | ScalarthresholdEnabled | read-only | current | Number of enabled thresholds (Monitoring statuses) |
| 1.3.6.1.4.1.2620.1.42.5 | ScalarthresholdActive | read-only | current | Number of active thresholds (Generating alerts) |
| 1.3.6.1.4.1.2620.1.42.6 | ScalarthresholdEventsSinceStartup | read-only | current | Number of activated thresholds since startup |
| 1.3.6.1.4.1.2620.1.42.7 | TablethresholdActiveEventsTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.7.1 | RowthresholdActiveEventsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.7.1.1 | ColumnthresholdActiveEventsIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.42.7.1.2 | ColumnthresholdActiveEventName | read-only | current | Name of the threshold |
| 1.3.6.1.4.1.2620.1.42.7.1.3 | ColumnthresholdActiveEventCategory | read-only | current | The category of the threshold |
| 1.3.6.1.4.1.2620.1.42.7.1.4 | ColumnthresholdActiveEventSeverity | read-only | current | Severity of the threshold: Cleared (0), Low (1), Medium (2), High (3), Critical (4) |
| 1.3.6.1.4.1.2620.1.42.7.1.5 | ColumnthresholdActiveEventSubject | read-only | current | The name of the status been checked by the threshold |
| 1.3.6.1.4.1.2620.1.42.7.1.6 | ColumnthresholdActiveEventSubjectValue | read-only | current | The value of the status been checked by the threshold |
| 1.3.6.1.4.1.2620.1.42.7.1.7 | ColumnthresholdActiveEventActivationTime | read-only | current | The activation time of the event |
| 1.3.6.1.4.1.2620.1.42.7.1.8 | ColumnthresholdActiveEventState | read-only | current | The state of the event [Active\Clearing] |
| 1.3.6.1.4.1.2620.1.42.8 | TablethresholdDestinationsTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.8.1 | RowthresholdDestinationsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.8.1.1 | ColumnthresholdDestinationIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.42.8.1.2 | ColumnthresholdDestinationName | read-only | current | Name of the destination |
| 1.3.6.1.4.1.2620.1.42.8.1.3 | ColumnthresholdDestinationType | read-only | current | The type of the destination |
| 1.3.6.1.4.1.2620.1.42.8.1.4 | ColumnthresholdSendingState | read-only | current | Alerts transmission status: Ok (0), Error (1) |
| 1.3.6.1.4.1.2620.1.42.8.1.5 | ColumnthresholdSendingStateDesc | read-only | current | Description for the alert transmission state |
| 1.3.6.1.4.1.2620.1.42.8.1.6 | ColumnthresholdAlertCount | read-only | current | Number of alerts transmitted to the destination |
| 1.3.6.1.4.1.2620.1.42.9 | TablethresholdErrorsTable | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.9.1 | RowthresholdErrorsEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.42.9.1.1 | ColumnthresholdErrorIndex | read-only | current | |
| 1.3.6.1.4.1.2620.1.42.9.1.2 | ColumnthresholdName | read-only | current | Name of the threshold |
| 1.3.6.1.4.1.2620.1.42.9.1.3 | ColumnthresholdThresholdOID | read-only | current | OID of the thresholds alert |
| 1.3.6.1.4.1.2620.1.42.9.1.4 | ColumnthresholdErrorDesc | read-only | current | Description of the error |
| 1.3.6.1.4.1.2620.1.42.9.1.5 | ColumnthresholdErrorTime | read-only | current | The occurrence time of the error |
| 1.3.6.1.4.1.2620.1.43 | NodeadvancedUrlFiltering | |||
| 1.3.6.1.4.1.2620.1.43.1 | NodeadvancedUrlFilteringSubscription | |||
| 1.3.6.1.4.1.2620.1.43.1.1 | ScalaradvancedUrlFilteringSubscriptionStatus | read-only | current | Subscription status Possible values include: valid, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.43.1.2 | ScalaradvancedUrlFilteringSubscriptionExpDate | read-only | current | Application Control subscription expiration date |
| 1.3.6.1.4.1.2620.1.43.1.3 | ScalaradvancedUrlFilteringSubscriptionDesc | read-only | current | Subscription description |
| 1.3.6.1.4.1.2620.1.43.2 | NodeadvancedUrlFilteringUpdate | |||
| 1.3.6.1.4.1.2620.1.43.2.1 | ScalaradvancedUrlFilteringUpdateStatus | read-only | current | Update status Possible values include: failed, up-to-date, new, degrade, unknown |
| 1.3.6.1.4.1.2620.1.43.2.2 | ScalaradvancedUrlFilteringUpdateDesc | read-only | current | Update description |
| 1.3.6.1.4.1.2620.1.43.2.3 | ScalaradvancedUrlFilteringNextUpdate | read-only | current | Next update description |
| 1.3.6.1.4.1.2620.1.43.2.4 | ScalaradvancedUrlFilteringVersion | read-only | current | Url Filtering database version |
| 1.3.6.1.4.1.2620.1.43.3 | NodeadvancedUrlFilteringRADStatus | |||
| 1.3.6.1.4.1.2620.1.43.3.1 | ScalaradvancedUrlFilteringRADStatusCode | read-only | current | RAD Status code |
| 1.3.6.1.4.1.2620.1.43.3.2 | ScalaradvancedUrlFilteringRADStatusDesc | read-only | current | RAD status description |
| 1.3.6.1.4.1.2620.1.43.101 | ScalaradvancedUrlFilteringStatusCode | read-only | current | Application Control Status code |
| 1.3.6.1.4.1.2620.1.43.102 | ScalaradvancedUrlFilteringStatusShortDesc | read-only | current | Application Control Status - Short Description |
| 1.3.6.1.4.1.2620.1.43.103 | ScalaradvancedUrlFilteringStatusLongDesc | read-only | current | Application Control Status - Long Description |
| 1.3.6.1.4.1.2620.1.44 | Nodedlp | |||
| 1.3.6.1.4.1.2620.1.44.1 | NodeexchangeAgents | |||
| 1.3.6.1.4.1.2620.1.44.1.1 | TableexchangeAgentsTable | not-accessible | current | Table for exchange agents status |
| 1.3.6.1.4.1.2620.1.44.1.1.1 | RowexchangeAgentsStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.1.44.1.1.1.1 | ColumnexchangeAgentsStatusTableIndex | read-only | current | Exchange agents: Table Index |
| 1.3.6.1.4.1.2620.1.44.1.1.1.2 | ColumnexchangeAgentName | read-only | current | Exchange agent name |
| 1.3.6.1.4.1.2620.1.44.1.1.1.3 | ColumnexchangeAgentStatus | read-only | current | Exchange agent status |
| 1.3.6.1.4.1.2620.1.44.1.1.1.4 | ColumnexchangeAgentTotalMsg | read-only | current | Exchange agent total messages |
| 1.3.6.1.4.1.2620.1.44.1.1.1.5 | ColumnexchangeAgentTotalScannedMsg | read-only | current | Exchange agent total scanned messages |
| 1.3.6.1.4.1.2620.1.44.1.1.1.6 | ColumnexchangeAgentDroppedMsg | read-only | current | Exchange agent dropped messages |
| 1.3.6.1.4.1.2620.1.44.1.1.1.7 | ColumnexchangeAgentUpTime | read-only | current | Number of seconds that the exchange agent is up |
| 1.3.6.1.4.1.2620.1.44.1.1.1.8 | ColumnexchangeAgentTimeSinceLastMsg | read-only | current | Number of seconds since the last message passed through the exchange agent |
| 1.3.6.1.4.1.2620.1.44.1.1.1.9 | ColumnexchangeAgentQueueLen | read-only | current | The current exchange agent message queue length |
| 1.3.6.1.4.1.2620.1.44.1.1.1.10 | ColumnexchangeQueueLen | read-only | current | The cumulative exchange server queue length |
| 1.3.6.1.4.1.2620.1.44.1.1.1.11 | ColumnexchangeAgentAvgTimePerMsg | read-only | current | The average (for all messages) latency added by the exchange agent |
| 1.3.6.1.4.1.2620.1.44.1.1.1.12 | ColumnexchangeAgentAvgTimePerScannedMsg | read-only | current | The average (for scanned messages only) latency added by the exchange agent |
| 1.3.6.1.4.1.2620.1.44.1.1.1.13 | ColumnexchangeAgentVersion | read-only | current | The version of the exchange agent |
| 1.3.6.1.4.1.2620.1.44.1.1.1.14 | ColumnexchangeCPUUsage | read-only | current | The exchange server CPU usage in percentage |
| 1.3.6.1.4.1.2620.1.44.1.1.1.15 | ColumnexchangeMemoryUsage | read-only | current | The exchange server memory usage in percentage |
| 1.3.6.1.4.1.2620.1.44.1.1.1.16 | ColumnexchangeAgentPolicyTimeStamp | read-only | current | The time of the last policy retrieved by the exchange agent from the gateway |
| 1.3.6.1.4.1.2620.1.44.11 | ScalardlpVersionString | read-only | current | Version |
| 1.3.6.1.4.1.2620.1.44.12 | ScalardlpLicenseStatus | read-only | current | License status |
| 1.3.6.1.4.1.2620.1.44.13 | ScalardlpLdapStatus | read-only | current | LDAP Status |
| 1.3.6.1.4.1.2620.1.44.14 | ScalardlpTotalScans | read-only | current | Traffic scans |
| 1.3.6.1.4.1.2620.1.44.15 | ScalardlpSMTPScans | read-only | current | Scanned e-mails |
| 1.3.6.1.4.1.2620.1.44.16 | ScalardlpSMTPIncidents | read-only | current | E-mail incidents |
| 1.3.6.1.4.1.2620.1.44.17 | ScalardlpLastSMTPScan | read-only | current | Last E-mail scan |
| 1.3.6.1.4.1.2620.1.44.18 | ScalardlpNumQuarantined | read-only | current | Quarantined messages |
| 1.3.6.1.4.1.2620.1.44.19 | ScalardlpQrntMsgsSize | read-only | current | Size of quarantined messages |
| 1.3.6.1.4.1.2620.1.44.20 | ScalardlpSentEMails | read-only | current | Sent e-mails |
| 1.3.6.1.4.1.2620.1.44.21 | ScalardlpExpiredEMails | read-only | current | Expired e-mails |
| 1.3.6.1.4.1.2620.1.44.22 | ScalardlpDiscardEMails | read-only | current | Discarded e-mails |
| 1.3.6.1.4.1.2620.1.44.23 | ScalardlpPostfixQLen | read-only | current | Postfix queue length |
| 1.3.6.1.4.1.2620.1.44.24 | ScalardlpPostfixErrors | read-only | current | Postfix errors |
| 1.3.6.1.4.1.2620.1.44.25 | ScalardlpPostfixQOldMsg | read-only | current | E-mails in queue older than 1 hour |
| 1.3.6.1.4.1.2620.1.44.26 | ScalardlpPostfixQMsgsSz | read-only | current | Size of messages in queue |
| 1.3.6.1.4.1.2620.1.44.27 | ScalardlpPostfixQFreeSp | read-only | current | Free space in queue |
| 1.3.6.1.4.1.2620.1.44.28 | ScalardlpQrntFreeSpace | read-only | current | Free space for quarantine |
| 1.3.6.1.4.1.2620.1.44.29 | ScalardlpQrntStatus | read-only | current | Quarantine status |
| 1.3.6.1.4.1.2620.1.44.30 | ScalardlpHttpScans | read-only | current | HTTP scans |
| 1.3.6.1.4.1.2620.1.44.31 | ScalardlpHttpIncidents | read-only | current | HTTP incidents |
| 1.3.6.1.4.1.2620.1.44.32 | ScalardlpHttpLastScan | read-only | current | HTTP last scan |
| 1.3.6.1.4.1.2620.1.44.33 | ScalardlpFtpScans | read-only | current | FTP scans |
| 1.3.6.1.4.1.2620.1.44.34 | ScalardlpFtpIncidents | read-only | current | FTP incidents |
| 1.3.6.1.4.1.2620.1.44.35 | ScalardlpFtpLastScan | read-only | current | FTP last scan |
| 1.3.6.1.4.1.2620.1.44.36 | ScalardlpBypassStatus | read-only | current | Bypass status |
| 1.3.6.1.4.1.2620.1.44.37 | ScalardlpUserCheckClnts | read-only | current | UserCheck clients |
| 1.3.6.1.4.1.2620.1.44.38 | ScalardlpLastPolStatus | read-only | current | Last policy install status |
| 1.3.6.1.4.1.2620.1.44.101 | ScalardlpStatusCode | read-only | current | DLP Status code |
| 1.3.6.1.4.1.2620.1.44.102 | ScalardlpStatusShortDesc | read-only | current | DLP Status - Short Description |
| 1.3.6.1.4.1.2620.1.44.103 | ScalardlpStatusLongDesc | read-only | current | DLP Status - Long Description |
| 1.3.6.1.4.1.2620.1.46 | Nodeamw | |||
| 1.3.6.1.4.1.2620.1.46.1 | NodeamwABUpdate | |||
| 1.3.6.1.4.1.2620.1.46.1.1 | ScalaramwABUpdateStatus | read-only | current | Anti-Malware update status Possible values include: failed, up-to-date, new, degrade, unknown |
| 1.3.6.1.4.1.2620.1.46.1.2 | ScalaramwABUpdateDesc | read-only | current | Anti-Malware update description |
| 1.3.6.1.4.1.2620.1.46.1.3 | ScalaramwABNextUpdate | read-only | current | Anti-Malware next update description |
| 1.3.6.1.4.1.2620.1.46.1.4 | ScalaramwABVersion | read-only | current | Anti-Malware database version |
| 1.3.6.1.4.1.2620.1.46.2 | NodeantiBotSubscription | |||
| 1.3.6.1.4.1.2620.1.46.2.1 | ScalarantiBotSubscriptionStatus | read-only | current | Anti-Bot subscription status Possible values include: valid, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.46.2.2 | ScalarantiBotSubscriptionExpDate | read-only | current | Anti-Bot subscription expiration date |
| 1.3.6.1.4.1.2620.1.46.2.3 | ScalarantiBotSubscriptionDesc | read-only | current | Anti-Bot subscription description |
| 1.3.6.1.4.1.2620.1.46.3 | NodeantiVirusSubscription | |||
| 1.3.6.1.4.1.2620.1.46.3.1 | ScalarantiVirusSubscriptionStatus | read-only | current | Anti-Virus subscription status Possible values include: valid, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.46.3.2 | ScalarantiVirusSubscriptionExpDate | read-only | current | Anti-Virus subscription expiration date |
| 1.3.6.1.4.1.2620.1.46.3.3 | ScalarantiVirusSubscriptionDesc | read-only | current | Anti-Virus subscription description |
| 1.3.6.1.4.1.2620.1.46.4 | NodeantiSpamSubscription | |||
| 1.3.6.1.4.1.2620.1.46.4.1 | ScalarantiSpamSubscriptionStatus | read-only | current | Anti-Spam subscription status Possible values include: valid, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.46.4.2 | ScalarantiSpamSubscriptionExpDate | read-only | current | Anti-Spam subscription expiration date |
| 1.3.6.1.4.1.2620.1.46.4.3 | ScalarantiSpamSubscriptionDesc | read-only | current | Anti-Spam subscription description |
| 1.3.6.1.4.1.2620.1.46.5 | NodeamwAVUpdate | |||
| 1.3.6.1.4.1.2620.1.46.5.1 | ScalaramwAVUpdateStatus | read-only | current | Anti-Virus update status Possible values include: failed, up-to-date, new, degrade, unknown |
| 1.3.6.1.4.1.2620.1.46.5.2 | ScalaramwAVUpdateDesc | read-only | current | Anti-Virus update description |
| 1.3.6.1.4.1.2620.1.46.5.3 | ScalaramwAVNextUpdate | read-only | current | Anti-Virus next update description |
| 1.3.6.1.4.1.2620.1.46.5.4 | ScalaramwAVVersion | read-only | current | Anti-Virus database version |
| 1.3.6.1.4.1.2620.1.46.101 | ScalaramwStatusCode | read-only | current | Anti-Bot & Anti-Virus Status code |
| 1.3.6.1.4.1.2620.1.46.102 | ScalaramwStatusShortDesc | read-only | current | Anti-Bot & Anti-Virus Status - Short Description |
| 1.3.6.1.4.1.2620.1.46.103 | ScalaramwStatusLongDesc | read-only | current | Anti-Bot & Anti-Virus Status - Long Description |
| 1.3.6.1.4.1.2620.1.49 | Nodete | |||
| 1.3.6.1.4.1.2620.1.49.16 | ScalarteUpdateStatus | read-only | current | Anti-Malware update status Possible values include: failed, up-to-date, new, degrade, downloading, unknown |
| 1.3.6.1.4.1.2620.1.49.17 | ScalarteUpdateDesc | read-only | current | Threat-Emulation update description |
| 1.3.6.1.4.1.2620.1.49.20 | ScalarteSubscriptionExpDate | read-only | current | Threat-Emulation subscription expiration date |
| 1.3.6.1.4.1.2620.1.49.25 | ScalarteSubscriptionStatus | read-only | current | Subscription status Possible values include: up-to-date, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.49.26 | ScalarteCloudSubscriptionStatus | read-only | current | Cloud subscription status Possible values include: up-to-date, expired, about-to-expire, not-associated, unknown |
| 1.3.6.1.4.1.2620.1.49.27 | ScalarteSubscriptionDesc | read-only | current | Threat-Emulation Subscription description |
| 1.3.6.1.4.1.2620.1.49.101 | ScalarteStatusCode | read-only | current | Threat-Emulation Status code |
| 1.3.6.1.4.1.2620.1.49.102 | ScalarteStatusShortDesc | read-only | current | Threat-Emulation Status - Short Description |
| 1.3.6.1.4.1.2620.1.49.103 | ScalarteStatusLongDesc | read-only | current | Threat-Emulation Status - Long Description |
| 1.3.6.1.4.1.2620.500 | Nodetables | |||
| 1.3.6.1.4.1.2620.500.9000 | TableraUsersTable | not-accessible | current | A table containing Remote Access users tunnel information. |
| 1.3.6.1.4.1.2620.500.9000.1 | RowraUsersEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.500.9000.1.1 | ColumnraInternalIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.19 | ColumnraExternalIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.20 | ColumnraUserState | read-write | current | |
| 1.3.6.1.4.1.2620.500.9000.1.21 | ColumnraOfficeMode | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.22 | ColumnraIkeOverTCP | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.23 | ColumnraUseUDPEncap | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.24 | ColumnraVisitorMode | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.25 | ColumnraRouteTraffic | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.26 | ColumnraCommunity | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.27 | ColumnraTunnelEncAlgorithm | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.28 | ColumnraTunnelAuthMethod | read-only | current | |
| 1.3.6.1.4.1.2620.500.9000.1.29 | ColumnraLogonTime | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002 | TabletunnelTable | not-accessible | current | A table containing VPN tunnel information. |
| 1.3.6.1.4.1.2620.500.9002.1 | RowtunnelEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.500.9002.1.1 | ColumntunnelPeerIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.2 | ColumntunnelPeerObjName | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.3 | ColumntunnelState | read-write | current | |
| 1.3.6.1.4.1.2620.500.9002.1.4 | ColumntunnelCommunity | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.5 | ColumntunnelNextHop | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.6 | ColumntunnelInterface | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.7 | ColumntunnelSourceIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.8 | ColumntunnelLinkPriority | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.9 | ColumntunnelProbState | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.10 | ColumntunnelPeerType | read-only | current | |
| 1.3.6.1.4.1.2620.500.9002.1.11 | ColumntunnelType | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003 | TablepermanentTunnelTable | not-accessible | current | A table containing VPN permanent tunnel information. |
| 1.3.6.1.4.1.2620.500.9003.1 | RowpermanentTunnelEntry | not-accessible | current | |
| 1.3.6.1.4.1.2620.500.9003.1.1 | ColumnpermanentTunnelPeerIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.2 | ColumnpermanentTunnelPeerObjName | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.3 | ColumnpermanentTunnelState | read-write | current | |
| 1.3.6.1.4.1.2620.500.9003.1.4 | ColumnpermanentTunnelCommunity | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.5 | ColumnpermanentTunnelNextHop | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.6 | ColumnpermanentTunnelInterface | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.7 | ColumnpermanentTunnelSourceIpAddr | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.8 | ColumnpermanentTunnelLinkPriority | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.9 | ColumnpermanentTunnelProbState | read-only | current | |
| 1.3.6.1.4.1.2620.500.9003.1.10 | ColumnpermanentTunnelPeerType | read-only | current |