CHLORIDE-ENVIRONMENT-SENSOR-MIB
58 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1364 | Nodechloride | |||
| 1.3.6.1.4.1.1364.10 | NodeenvironmentSensor | |||
| 1.3.6.1.4.1.1364.10.1 | ScalarnumSensors | read-write | current | The number of sensors that are currently connected. |
| 1.3.6.1.4.1.1364.10.2 | TablesensorTable | not-accessible | mandatory | A list of sensor table entries. |
| 1.3.6.1.4.1.1364.10.2.1 | RowsensorEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1364.10.2.1.1 | Columnname | read-write | current | A string identifying the sensor. |
| 1.3.6.1.4.1.1364.10.2.1.2 | Columnstatus | read-only | mandatory | Overall status of the sensor determined by the most severe sensor alarm present. |
| 1.3.6.1.4.1.1364.10.2.1.3 | Columnaddress | read-only | mandatory | The Blue Bus address of the environment sensor. |
| 1.3.6.1.4.1.1364.10.2.1.4 | Columntemperature | read-only | mandatory | Current temperature reading in celsius. |
| 1.3.6.1.4.1.1364.10.2.1.5 | ColumntempStatus | read-only | mandatory | Temperature status determined by tempLoSeverity and tempHiSeverity objects. |
| 1.3.6.1.4.1.1364.10.2.1.6 | ColumntempHiSeverity | read-write | mandatory | Severity level when temperature is greater than or equal to tempHiThreshold. |
| 1.3.6.1.4.1.1364.10.2.1.7 | ColumntempLoSeverity | read-write | mandatory | Severity level when temperature is less than or equal to tempLoThreshold. |
| 1.3.6.1.4.1.1364.10.2.1.8 | ColumntempHiThreshold | read-write | mandatory | When the the temperature is greater than or equal to this value, the sensorHiTemperature alarm is generated. |
| 1.3.6.1.4.1.1364.10.2.1.9 | ColumntempLoThreshold | read-write | mandatory | When the the temperature is less than or equal to this value, the sensorLoTemperature alarm is generated. |
| 1.3.6.1.4.1.1364.10.2.1.10 | Columnhumidity | read-only | mandatory | Current relative humidity reading in percent. |
| 1.3.6.1.4.1.1364.10.2.1.11 | ColumnhumidityStatus | read-only | mandatory | Relative humidity status determined by humidityHiSeverity and humidityLoSeverity objects. |
| 1.3.6.1.4.1.1364.10.2.1.12 | ColumnhumidityHiSeverity | read-write | mandatory | Severity level when relative humidity is greater than or equal to humidityHiThreshold. |
| 1.3.6.1.4.1.1364.10.2.1.13 | ColumnhumidityLoSeverity | read-write | mandatory | Severity level when relative humidity is less than or equal to humidityLoThreshold. |
| 1.3.6.1.4.1.1364.10.2.1.14 | ColumnhumidityHiThreshold | read-write | mandatory | When the the relative humidity is greater than or equal to this value, the sensorHiRelativeHumidity alarm is generated. |
| 1.3.6.1.4.1.1364.10.2.1.15 | ColumnhumidityLoThreshold | read-write | mandatory | When the relative humidity is less than or equal to this value, the sensorLoRelativeHumidity alarm is generated. |
| 1.3.6.1.4.1.1364.10.2.1.16 | ColumninputName1 | read-write | current | A string identifying the device on input 1. |
| 1.3.6.1.4.1.1364.10.2.1.17 | ColumninputStatus1 | read-only | mandatory | The status of the current state of input 1. |
| 1.3.6.1.4.1.1364.10.2.1.18 | ColumninputNormalState1 | read-write | mandatory | The normal state of input 1 ( open or closed ). |
| 1.3.6.1.4.1.1364.10.2.1.19 | ColumninputFaultSeverity1 | read-write | mandatory | Severity level when input 1 is not in its normal state as defined by inputNormalState1. |
| 1.3.6.1.4.1.1364.10.2.1.20 | ColumninputUrl1 | read-write | current | An optional string identifying the URL associated with the device on input 1. |
| 1.3.6.1.4.1.1364.10.2.1.21 | ColumninputName2 | read-write | current | A string identifying the device on input 2. |
| 1.3.6.1.4.1.1364.10.2.1.22 | ColumninputStatus2 | read-only | mandatory | The status of the current state of input 2. |
| 1.3.6.1.4.1.1364.10.2.1.23 | ColumninputNormalState2 | read-write | mandatory | The normal state of input 2 ( open or closed ). |
| 1.3.6.1.4.1.1364.10.2.1.24 | ColumninputFaultSeverity2 | read-write | mandatory | Severity level when input 2 is not in its normal state as defined by inputNormalState2. |
| 1.3.6.1.4.1.1364.10.2.1.25 | ColumninputUrl2 | read-write | current | An optional string identifying the URL associated with the device on input 2. |
| 1.3.6.1.4.1.1364.10.2.1.26 | ColumninputName3 | read-write | current | A string identifying the device on input 3. |
| 1.3.6.1.4.1.1364.10.2.1.27 | ColumninputStatus3 | read-only | mandatory | The status of the current state of input 3. |
| 1.3.6.1.4.1.1364.10.2.1.28 | ColumninputNormalState3 | read-write | mandatory | The normal state of input 3 ( open or closed ). |
| 1.3.6.1.4.1.1364.10.2.1.29 | ColumninputFaultSeverity3 | read-write | mandatory | Severity level when input 3 is not in its normal state as defined by inputNormalState3. |
| 1.3.6.1.4.1.1364.10.2.1.30 | ColumninputUrl3 | read-write | current | An optional string identifying the URL associated with the device on input 3. |
| 1.3.6.1.4.1.1364.10.2.1.31 | ColumnoutputName | read-write | current | A string identifying the device attached to the output relay. |
| 1.3.6.1.4.1.1364.10.2.1.32 | ColumnoutputState | read-write | mandatory | The state of the output relay ( on = energized, off = de-energized ). |
| 1.3.6.1.4.1.1364.10.2.1.33 | ColumnoutputUrl | read-write | current | An optional string identifying the URL associated with the device attached to the output relay. |
| 1.3.6.1.4.1.1364.10.3 | NodesensorAlarm | |||
| 1.3.6.1.4.1.1364.10.3.1 | ScalarsensorAlarmsPresent | read-write | mandatory | Number of alarms present. |
| 1.3.6.1.4.1.1364.10.3.2 | TablealarmTable | not-accessible | mandatory | A list of alarm entries. |
| 1.3.6.1.4.1.1364.10.3.2.1 | RowalarmEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.1364.10.3.2.1.1 | ColumnalarmAddress | not-accessible | current | The Blue Bus address of the sensor which generated the alarm. |
| 1.3.6.1.4.1.1364.10.3.2.1.2 | ColumnalarmDescr | read-only | current | The OID of the alarm generated. |
| 1.3.6.1.4.1.1364.10.3.2.1.3 | ColumnalarmTime | read-only | current | The value of sysUpTime when the alarm condition was detected. |
| 1.3.6.1.4.1.1364.10.3.3 | NodesensorAlarms | |||
| 1.3.6.1.4.1.1364.10.3.3.1 | IdentitysensorLostComms | current | Blue Bus communications to the sensor have been lost. | |
| 1.3.6.1.4.1.1364.10.3.3.2 | IdentitysensorHiRelativeHumidity | current | Current relative humidity is greater than or equal to humidityHiThreshold. | |
| 1.3.6.1.4.1.1364.10.3.3.3 | IdentitysensorLoRelativeHumidity | current | Current relative humidity is less than or equal to humidityLoThreshold. | |
| 1.3.6.1.4.1.1364.10.3.3.4 | IdentitysensorHiTemperature | current | Current temperature is greater than or equal to tempHiThreshold. | |
| 1.3.6.1.4.1.1364.10.3.3.5 | IdentitysensorLoTemperature | current | Current temperature is less than or equal to tempLoThreshold. | |
| 1.3.6.1.4.1.1364.10.3.3.6 | IdentitysensorInputFault1 | current | The current state of input 1 does not equal inputNormalState1. | |
| 1.3.6.1.4.1.1364.10.3.3.7 | IdentitysensorInputFault2 | current | The current state of input 2 does not equal inputNormalState2. | |
| 1.3.6.1.4.1.1364.10.3.3.8 | IdentitysensorInputFault3 | current | The current state of input 3 does not equal inputNormalState3. | |
| 1.3.6.1.4.1.1364.10.3.3.9 | IdentitysensorOutputRelayEnergized | current | The outputState object equals on. | |
| 1.3.6.1.4.1.1364.10.4 | NodesensorTraps | |||
| 1.3.6.1.4.1.1364.10.4.1 | NotificationtrapEntryAdded | current | This trap is sent each time an alarm is inserted into to the alarm table. | |
| 1.3.6.1.4.1.1364.10.4.2 | NotificationtrapEntryRemoved | current | This trap is sent each time an alarm is removed from the alarm table. |