CIE1000-TC
32 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | Gauge32 Integer32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CIE1000AdvDestMacType | INTEGER { any(0), unicast(1), multicast(2), broadcast(3), specific(4) } | current | Represents a destination MAC type selector. |
| CIE1000ASRType | INTEGER { any(0), specific(1), range(2) } | current | Represents an Any/Specific/Range selector. |
| CIE1000ASType | INTEGER { any(0), specific(1) } | current | Represents an Any/Specific selector. |
| CIE1000BitType | INTEGER { any(0), zero(1), one(2) } | current | Represents a bit selector. |
| CIE1000DestMacType | INTEGER { any(0), unicast(1), multicast(2), broadcast(3) } | current | Represents a destination MAC type selector. |
| CIE1000DisplayString | OCTET STRING (SIZE (0..255)) | current | Represents textual information taken from the ASCII character set, as defined in ANSI X3.4-1986 with some restrictions. The following rules apply: - only character codes 32-126 (decimal) are supported - the graphics cha… |
| CIE1000EtherType | Gauge32 (0..65535) | current | Represents a 16-bit Ethernet Type. |
| CIE1000InetAddress | OCTET STRING (SIZE (1..253)) | current | Represents an internet address. Following is the list of supported address types: IPv4 address, IPv6 address, Domain name or No-Address. The addresses are encoded as a human readable string as defined here: - IPv4 addre… |
| CIE1000Integer16 | INTEGER (-32768..32767) | current | Represents a 16-bit signed integer. |
| CIE1000Integer64 | OCTET STRING (SIZE (8)) | current | Represents a 64-bit signed integer encoded as two's complement in network order. |
| CIE1000Integer8 | INTEGER (-128..127) | current | Represents an 8-bit signed integer. |
| CIE1000InterfaceIndex | Integer32 (0..2147483647) | current | The interface index is a unique identification of an arbitrary interface in the system. Example of interfaces could be physical ports, aggregations, VLAN interfaces and others. The interface indexes used by the system i… |
| CIE1000IpAddress | OCTET STRING (SIZE (1..46)) | current | Represents an internet address. Following is the list of supported address types: IPv4 address, IPv6 address or No-Address. The addresses are encoded as a human readable string as defined here: - IPv4 address is encoded… |
| CIE1000MepDmTimeUnit | INTEGER { microSeconds(0), nanoSeconds(1) } | current | Calculation Delay Measurement time unit. |
| CIE1000MepInstanceDirection | INTEGER { down(0), up(1) } | current | The MEP instance direction. |
| CIE1000MepTxRate | INTEGER { invalid(0), frames300PerSecond(1), frames100PerSecond(2), frames10PerSecond(3), frames1PerSecond(4), frames6PerMinute(5), frames1PerMinute(6), frames6PerHour(7) } | current | MEP PDU transmission rate. |
| CIE1000Percent | Gauge32(0..100) | current | An integer in the range 0..100 representing a percent value |
| CIE1000PortList | OCTET STRING (SIZE (1..128)) | current | A list of ports that may be distributed across more stack units. The type should be interpreted as a sequence of bits, each bit representing a port. If a bit is set (1) the represented port is included in the port list.… |
| CIE1000PortStatusSpeed | INTEGER { undefined(0), speed10M(1), speed100M(2), speed1G(3), speed2G5(4), speed5G(5), speed10G(6), speed12G(7) } | current | This enumerations show the current interface speed. |
| CIE1000RowEditorState | Gauge32 | current | The RowEditorState is used both as a column in the dynamic tables, and as a object in the row editor. The meaning of the row editor state depends on the context where it is used. In either case it is used to implement a… |
| CIE1000SfpTransceiver | INTEGER { none(0), notSupported(1), sfp100FX(2), sfp1000BaseT(7), sfp1000BaseCx(8), sfp1000BaseSx(9), sfp1000BaseLx(10), sfp1000BaseX(11), sfp2G5(12), sfp5G(13), sfp10G(14) } | current | This enumerations show the SFP transceiver type. |
| CIE1000TimeStamp | OCTET STRING (SIZE (8)) | current | Represents a timestamp in seconds since epoch. The data is encoded as a 64-bit unsigned integer in network order. |
| CIE1000Unsigned16 | Gauge32 (0..65535) | current | Represents a 16-bit unsigned integer. |
| CIE1000Unsigned64 | OCTET STRING (SIZE (8)) | current | Represents a 64-bit unsigned integer encoded in network order. |
| CIE1000Unsigned8 | Gauge32 (0..255) | current | Represents an 8-bit unsigned integer. |
| CIE1000VcapKeyType | INTEGER { normal(0), doubleTag(1), ipAddr(2), macIpAddr(3) } | current | Represents a VCAP key type selector. |
| CIE1000VclProtoEncap | OCTET STRING (SIZE (3..6)) | current | Represents a protocol encapsulation, needed by the Protocol part of the VCL module. The protocol encapsulation type, along with the respective encapsulation fields are encoded as an octet string of variable size ranging… |
| CIE1000Vlan | Gauge32 (1..4095) | current | An integer representing a VLAN ID. |
| CIE1000VlanListQuarter | OCTET STRING (SIZE (128)) | current | A list representing 1024 VLAN IDs. The type should be interpreted as a sequence of bits, each bit representing one VLAN ID. If a bit is set (1) the represented VLAN is included in the VLAN list. If a bit is not set (0) … |
| CIE1000VlanOrZero | Gauge32 (0..4095) | current | An integer representing a VLAN ID or zero. |
| CIE1000VlanTagPriority | INTEGER { any(0), value0(1), value1(2), value2(3), value3(4), value4(5), value5(6), value6(7), value7(8), range0to1(9), range2to3(10), range4to5(11), range6to7(12), range0to3(13), range4to7(14) } | current | VLAN priority. |
| CIE1000VlanTagType | INTEGER { any(0), untagged(1), tagged(2), cTagged(3), sTagged(4) } | current | Represents a VLAN tag type selector. |