CIENA-CES-BENCHMARK-MIB
322 objects
The MIB module for managing RFC2544/Y1564 service benchmark testing.
Imported Objects
| CIENA-GLOBAL-MIB | cienaGlobalMacAddress cienaGlobalSeverity |
| CIENA-SMI | cienaCesConfig cienaCesNotifications cienaCesStatistics |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1271.2.1.39 | IdentitycienaCesBenchmarkMIB | The MIB module for managing RFC2544/Y1564 service benchmark testing. | ||
| 1.3.6.1.4.1.1271.2.1.39.1 | NodecienaCesBenchmarkMIBObjects | |||
| 1.3.6.1.4.1.1271.2.1.39.1.1 | NodecienaCesBenchmarkModule | |||
| 1.3.6.1.4.1.1271.2.1.39.1.1.1 | NodecienaCesBenchmarkGlobalObjects | |||
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.1 | ScalarcienaCesBenchmarkGlobalAdminState | read-write | current | Administrative state of the benchmark feature at the global level. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.2 | ScalarcienaCesBenchmarkGlobalGeneratorDefaultEmixSequenceId | read-write | current | Default EMIX sequence to be used on a test instance when no EMIX is specified in the test instance targeted test profile. This applies to generator test instan… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.3 | ScalarcienaCesBenchmarkGlobalGeneratorDefaultKpiProfileId | read-write | current | Default KPI profile to be used to analyze the results of a test instance when no KPI profile is specifed in the targeted test profile. This applies to generato… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.4 | ScalarcienaCesBenchmarkGlobalGeneratorDefaultBwAllocProfileId | read-write | current | Default bandwidth allocation profile to be used with a test instance when no bandwidth allocation profile is specified in the targeted test profile. This appli… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.5 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigEntities | read-only | current | Maximum number of entities that can be created on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.6 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigTestInstances | read-only | current | Maximum number of test instances that can be created on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.7 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigTestProfiles | read-only | current | Maximum number of test profiles that can be created on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.8 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigKpiProfiles | read-only | current | Maximum number of KPI profiles that can be created on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.9 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigBwAllocProfiles | read-only | current | Maximum number of bandwidth distribution profiles that can be created on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.10 | ScalarcienaCesBenchmarkGlobalPlatformMaxConfigEmixSequences | read-only | current | Maximum number of EMIX sequences that can be created on this platform, including the system created ones. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.11 | ScalarcienaCesBenchmarkGlobalPlatformMaxSimultaneousRunningTests | read-only | current | Maximum number of test instances that can be running simultaneously on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.12 | ScalarcienaCesBenchmarkGlobalConfiguredEntities | read-only | current | Number of entities currently configured. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.13 | ScalarcienaCesBenchmarkGlobalConfiguredTestInstances | read-only | current | Number of test instances currently configured. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.14 | ScalarcienaCesBenchmarkGlobalConfiguredProfiles | read-only | current | Number of test profiles currently configured. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.15 | ScalarcienaCesBenchmarkGlobalConfiguredEmixSequences | read-only | current | Number of EMIX sequences currently configured, including the system created ones. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.16 | ScalarcienaCesBenchmarkGlobalConfiguredKpiProfiles | read-only | current | Number of KPI profiles currently configured. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.17 | ScalarcienaCesBenchmarkGlobalConfiguredBwAllocProfiles | read-only | current | Number of bandwidth distribution profiles currently configured. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.18 | ScalarcienaCesBenchmarkGlobalEnabledTestInstances | read-only | current | Number of test instances currently enabled across the platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.1.19 | ScalarcienaCesBenchmarkGlobalGeneratorRunningTestInstances | read-only | current | Number of generator test instances currently running across the platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2 | TablecienaCesBenchmarkEntityTable | not-accessible | current | Table of benchmark entity entries. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1 | RowcienaCesBenchmarkEntityEntry | not-accessible | current | BENCHMARK Entity characteristics. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.1 | ColumncienaCesBenchmarkEntityEntryId | not-accessible | current | Entity unique ID |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.2 | ColumncienaCesBenchmarkEntityEntryName | read-create | current | Name of the benchmark entity as entered when created. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.3 | ColumncienaCesBenchmarkEntityEntryRole | read-create | current | Entity role |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.4 | ColumncienaCesBenchmarkEntityEntryPortId | read-create | current | Entity port under test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.5 | ColumncienaCesBenchmarkEntityEntryMode | read-create | current | Entity mode |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.6 | ColumncienaCesBenchmarkEntityEntryAdminState | read-create | current | Entity admin state. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.7 | ColumncienaCesBenchmarkEntityEntryLocalMac | read-only | current | The FPGA internal test port assigned mac address. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.8 | ColumncienaCesBenchmarkEntityEntrySlotId | read-only | current | The slot Id of the line module associated with this entity. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.9 | ColumncienaCesBenchmarkEntityEntryReflectorVendorType | read-create | current | Indicator as to what type of equipment is generating the test traffic on the remote end. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.10 | ColumncienaCesBenchmarkEntityEntryReflectionLevel | read-create | current | For reflector entities, this indicates the minimum reflection level required. If test traffic is going over an ethernet L2 cloud, l2-only is fine. But if the t… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.11 | ColumncienaCesBenchmarkEntityEntryGeneratorHFrameSize | read-create | current | Maximum frame size that should be generated by the generator device. This H frame size should to leave enough room for extra encapsulation bytes that will be p… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.12 | ColumncienaCesBenchmarkEntityEntryMaxConfigTestInstances | read-only | current | Maximum number of test instances that can be configured on this entity. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.13 | ColumncienaCesBenchmarkEntityEntryMaxSimultaneousTestInstances | read-only | current | Maximum number of test instances that can be enabled (reflector) or running (generator) on this entity, given the availability of hw sessions. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.14 | ColumncienaCesBenchmarkEntityEntryOperEnabled | read-only | current | Entity operational enable/disable. An entity is operationally enabled when the feature is enabled, the entity is enabled and at least one test instance associa… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.15 | ColumncienaCesBenchmarkEntityEntryNumTestInstancesConfigured | read-only | current | Number of test instances currently configured on this entity. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.16 | ColumncienaCesBenchmarkEntityEntryNumTestInstancesEnabled | read-only | current | Number of test instances currently enabled. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.17 | ColumncienaCesBenchmarkEntityEntryGenNumTestInstancesRunning | read-only | current | Number of test instances currently running. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.18 | ColumncienaCesBenchmarkEntityEntryBwAvailable | read-only | current | Bandwidth available for test traffic if a reflector. Bandwidth remaining for other test instances to be started if a generator. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.19 | ColumncienaCesBenchmarkEntityEntryGenBwUsedByRunningTests | read-only | current | Bandwidth currently used by test instances currently running, in Mbps. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.20 | ColumncienaCesBenchmarkEntityEntryAvailableHwSessions | read-only | current | Maximum number of simultaneous hardware sessions available on this platform. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.21 | ColumncienaCesBenchmarkEntityEntryAllocatedHwSessions | read-only | current | The number of allocated hardware sessions |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.22 | ColumncienaCesBenchmarkEntityEntryRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.23 | ColumncienaCesBenchmarkEntityEntryClearStats | read-create | current | Set to true to clear all global fpga counters for the given entity. Clear is only allowed for a reflector if no test instances are enabled, and for a generator… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.2.1.24 | ColumncienaCesBenchmarkEntityEntryReflectorMacValidation | read-create | current | This attribute is only valid for the reflector entity and indicates whether the reflector verifies that the destination MAC of the test frames matches the MAC … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3 | TablecienaCesBenchmarkEntityStatsTable | not-accessible | current | Table of benchmark entity statistics entries. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1 | RowcienaCesBenchmarkEntityStatsEntry | not-accessible | current | BENCHMARK Entity characteristics. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.1 | ColumncienaCesBenchmarkEntityStatsEntryClear | read-write | obsolete | Set to true to clear all port and/or global fpga counters for the given entity. Clear is only allowed for a reflector if no test instances are enabled, and for… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.2 | ColumncienaCesBenchmarkEntityStatsEntryPortTxBytes | read-only | current | Number of bytes transmitted by the benchmark port |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.3 | ColumncienaCesBenchmarkEntityStatsEntryPortTxPkts | read-only | current | Number of packets transmitted by the benchmark port |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.4 | ColumncienaCesBenchmarkEntityStatsEntryPortTxCrcErrorPkts | read-only | current | Number of packets with CRC errors |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.5 | ColumncienaCesBenchmarkEntityStatsEntryPortTxUcastPkts | read-only | current | Number of unicast packets transmitted by the benchmark port |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.6 | ColumncienaCesBenchmarkEntityStatsEntryPortTxMcastPkts | read-only | current | Number of multicast packets transmitted by the benchmark port |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.7 | ColumncienaCesBenchmarkEntityStatsEntryPortTxBcastPkts | read-only | current | Number of broadcast packets transmitted by the benchmark port |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.8 | ColumncienaCesBenchmarkEntityStatsEntryPortRxUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.9 | ColumncienaCesBenchmarkEntityStatsEntryPortRxOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.10 | ColumncienaCesBenchmarkEntityStatsEntryPortRxFragmentsPkts | read-only | current | The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.11 | ColumncienaCesBenchmarkEntityStatsEntryPortRxJabbersPkts | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.12 | ColumncienaCesBenchmarkEntityStatsEntryPortTxPausePkts | read-only | current | The transmit pause packets for the port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.13 | ColumncienaCesBenchmarkEntityStatsEntryPortTxDropPkts | read-only | current | The total number of dropped packets on the benchmark port when traffic profiles are enabled (311v only). |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.14 | ColumncienaCesBenchmarkEntityStatsEntryPortTxDiscardPkts | read-only | current | The total number of discarded packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.15 | ColumncienaCesBenchmarkEntityStatsEntryPortTxLOutRangePkts | read-only | current | The transmit length out of range packet count. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.16 | ColumncienaCesBenchmarkEntityStatsEntryPortTx64OctsPkts | read-only | current | Number of 64-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.17 | ColumncienaCesBenchmarkEntityStatsEntryPortTx65To127Pkts | read-only | current | Number of 64 to 127-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.18 | ColumncienaCesBenchmarkEntityStatsEntryPortTx128To255Pkts | read-only | current | Number of 128 to 255-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.19 | ColumncienaCesBenchmarkEntityStatsEntryPortTx256To511Pkts | read-only | current | Number of 256 to 511-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.20 | ColumncienaCesBenchmarkEntityStatsEntryPortTx512To1023Pkts | read-only | current | Number of 512 to 1023-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.21 | ColumncienaCesBenchmarkEntityStatsEntryPortTx1024To1518Pkts | read-only | current | Number of 1024 to 1518-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.22 | ColumncienaCesBenchmarkEntityStatsEntryPortTx1519To2047Pkts | read-only | current | Number of 1519 to 2047-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.23 | ColumncienaCesBenchmarkEntityStatsEntryPortTx2048To4095Pkts | read-only | current | Number of 2048 to 4095-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.24 | ColumncienaCesBenchmarkEntityStatsEntryPortTx4096To9216Pkts | read-only | current | Number of 4096 to 9216-byte packets transmitted on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.25 | ColumncienaCesBenchmarkEntityStatsEntryPortRxBytes | read-only | current | Number of bytes received on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.26 | ColumncienaCesBenchmarkEntityStatsEntryPortRxPkts | read-only | current | Number of packets received on the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.27 | ColumncienaCesBenchmarkEntityStatsEntryPortRxExDeferPkts | read-only | current | Number of excessive deferred packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.28 | ColumncienaCesBenchmarkEntityStatsEntryPortRxDeferPkts | read-only | current | Number of deferred packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.29 | ColumncienaCesBenchmarkEntityStatsEntryPortRxGiantPkts | read-only | current | Number of too big packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.30 | ColumncienaCesBenchmarkEntityStatsEntryPortRxUnderRunPkts | read-only | current | Underrun packet count for the benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.31 | ColumncienaCesBenchmarkEntityStatsEntryPortRxCrcErrorPkts | read-only | current | Number of packets received with CRC errors. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.32 | ColumncienaCesBenchmarkEntityStatsEntryPortRxLCheckErrorPkts | read-only | current | Number of packets with length check errors. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.33 | ColumncienaCesBenchmarkEntityStatsEntryPortRxLOutRangePkts | read-only | current | The number of frames received by the benchmark port that exceeded the maximum permitted frame size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.34 | ColumncienaCesBenchmarkEntityStatsEntryPortRxPausePkts | read-only | current | The total receive pause packets for the port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.35 | ColumncienaCesBenchmarkEntityStatsEntryPortRxUcastPkts | read-only | current | The total number of unicast packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.36 | ColumncienaCesBenchmarkEntityStatsEntryPortRxMcastPkts | read-only | current | The total number of multicast packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.37 | ColumncienaCesBenchmarkEntityStatsEntryPortRxBcastPkts | read-only | current | The total number of broadcast packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.38 | ColumncienaCesBenchmarkEntityStatsEntryPortRx64OctsPkts | read-only | current | The total number of 64-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.39 | ColumncienaCesBenchmarkEntityStatsEntryPortRx65To127Pkts | read-only | current | The total number of 65 to 127-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.40 | ColumncienaCesBenchmarkEntityStatsEntryPortRx128To255Pkts | read-only | current | The total number of 128 to 255-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.41 | ColumncienaCesBenchmarkEntityStatsEntryPortRx256To511Pkts | read-only | current | The total number of 256 to 511-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.42 | ColumncienaCesBenchmarkEntityStatsEntryPortRx512To1023Pkts | read-only | current | The total number of 512 to 1023-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.43 | ColumncienaCesBenchmarkEntityStatsEntryPortRx1024To1518Pkts | read-only | current | The total number of 1024 to 1518-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.44 | ColumncienaCesBenchmarkEntityStatsEntryPortRx1519To2047Pkts | read-only | current | The total number of 1519 to 2047-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.45 | ColumncienaCesBenchmarkEntityStatsEntryPortRx2048To4095Pkts | read-only | current | The total number of 2048 to 4095-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.46 | ColumncienaCesBenchmarkEntityStatsEntryPortRx4096To9216Pkts | read-only | current | The total number of 4096 to 9216-byte packets received by benchmark port. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.47 | ColumncienaCesBenchmarkEntityStatsEntryFpgaMissClassPkts | read-only | current | Test packets received that didn't match any enabled test session. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.48 | ColumncienaCesBenchmarkEntityStatsEntryFpgaCrcErrPkts | read-only | current | Test packets received with CRC errors |
| 1.3.6.1.4.1.1271.2.1.39.1.1.3.1.49 | ColumncienaCesBenchmarkEntityStatsEntryFpgaUdpChkSumErrPkts | read-only | current | Test packets received with UDP checksum errors |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4 | TablecienaCesBenchmarkEmixSequenceTable | not-accessible | current | Table providing the list of configured EMIX sequences on this node. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1 | RowcienaCesBenchmarkEmixSequenceEntry | not-accessible | current | EMIX sequence entry. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.1 | ColumncienaCesBenchmarkEmixSequenceId | not-accessible | current | Unique Id of the EMIX sequence entry |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.2 | ColumncienaCesBenchmarkEmixSequenceName | read-create | current | Name of this EMIX sequence |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.3 | ColumncienaCesBenchmarkEmixSequence | read-create | current | EMIX sequence which is a sequence of up to 16 letters from the following set, that can be repeated, where each letter is associated with the frame size below i… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.4 | ColumncienaCesBenchmarkEmixSequenceUFrameSize | read-create | current | The frame size associated with the u letter in the given sequence. The default value is 594. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.5 | ColumncienaCesBenchmarkEmixSequenceNumOfRef | read-only | current | Number of generator test profiles currently using this EMIX sequence for testing. If this is the default EMIX sequence set in the generator, that also count as… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.6 | ColumncienaCesBenchmarkEmixSequenceUserCreated | read-only | current | Flag indicating whether this sequence was created by the user or by the system at initialization. Only user created sequences are editable. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.4.1.7 | ColumncienaCesBenchmarkEmixSequenceRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.5 | TablecienaCesBenchmarkEmixFrameSizeTable | not-accessible | current | Table providing the list of frame sizes associated with the specified EMIX sequence Id. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.5.1 | RowcienaCesBenchmarkEmixFrameSizeEntry | not-accessible | current | Frame size associated with given EMIX sequence ID and frame size index on a given Entity |
| 1.3.6.1.4.1.1271.2.1.39.1.1.5.1.1 | ColumncienaCesBenchmarkEmixFrameSizeIndex | not-accessible | current | Index of frame size in array of frame sizes for the given EMIX sequence. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.5.1.2 | ColumncienaCesBenchmarkEmixFrameSizeEntryFrameSize | read-only | current | Frame size associated with the letter at the position given by cienaCesBenchmarkEmixFrameSizeIndex in the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.6 | TablecienaCesBenchmarkEmixAvgFrameSizeTable | not-accessible | current | Table providing the average frame size associated with the specified EMIX sequence Id on a given Entity. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.6.1 | RowcienaCesBenchmarkEmixAvgFrameSizeEntry | not-accessible | current | Average frame size associated with given EMIX sequence ID and Entity. Only valid for Generator entities. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.6.1.1 | ColumncienaCesBenchmarkEmixAvgFrameSize | read-only | current | Average frame size for the EMIX sequence with Id cienaCesBenchmarkEmixSequenceId on the generator entity with Id cienaCesBenchmarkEntityEntryId. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7 | TablecienaCesBenchmarkKpiProfileTable | not-accessible | current | Table providing the list of configured Key Performance Indicator profiles on this node. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7.1 | RowcienaCesBenchmarkKpiProfileEntry | not-accessible | current | Hw session allocation entry. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.1 | ColumncienaCesBenchmarkKpiProfileId | not-accessible | current | Unique Id of the KPI profile entry |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.2 | ColumncienaCesBenchmarkKpiProfileName | read-create | current | Name of a the KPI profile |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.3 | ColumncienaCesBenchmarkKpiProfileNumOfRef | read-only | current | Number of generator test profiles currently using this KPI profile for results analysis. If this is the default KPI profile set in the generator, that also cou… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.7.1.4 | ColumncienaCesBenchmarkKpiProfileRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8 | TablecienaCesBenchmarkKpiPcpColorTable | not-accessible | current | Table providing the list of configured Key Performance Indicator per KPI profile, per PCP and per Color. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1 | RowcienaCesBenchmarkKpiPcpColorEntry | not-accessible | current | Entry for the KPI values for the given KPI profile, PCP and color. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.1 | ColumncienaCesBenchmarkKpiPcpIndex | not-accessible | current | Index for the PCP |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.2 | ColumncienaCesBenchmarkKpiColorIndex | not-accessible | current | Index for the PCP |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.3 | ColumncienaCesBenchmarkKpiPcp | read-only | current | PCP value associated with this entry |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.4 | ColumncienaCesBenchmarkKpiColor | read-only | current | Traffic color, green or yellow, associated with these KPIs. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.5 | ColumncienaCesBenchmarkKpiThroughput | read-write | current | Throughput KPI for the given KPI profile, PCP and color expressed in percent of bandwidth * 10000 to provide a 4 decimal point value. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.6 | ColumncienaCesBenchmarkKpiFrameloss | read-write | current | Frameloss KPI for the given KPI profile, PCP and color expressed in percent of bandwidth * 10000 to provide a 4 decimal point value. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.7 | ColumncienaCesBenchmarkKpiLatency | read-write | current | Maximum latency in micro-seconds that the latency result should not exceed in order for the test to be considered a pass. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.8.1.8 | ColumncienaCesBenchmarkKpiPdv | read-write | current | Maximum PDV in micro-seconds that the PDV test result should not exceed in order for the test to be considered a pass. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9 | TablecienaCesBenchmarkBwAllocProfileTable | not-accessible | current | Table providing the list of configured bandwidth allocation profiles on this node. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9.1 | RowcienaCesBenchmarkBwAllocProfileEntry | not-accessible | current | BW allocation profile entry |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.1 | ColumncienaCesBenchmarkBwAllocProfileId | not-accessible | current | Unique Id of the bandwidth allocation profile entry |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.2 | ColumncienaCesBenchmarkBwAllocProfileName | read-create | current | Name of a the bandwidth allocation profile |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.3 | ColumncienaCesBenchmarkBwAllocProfileNumOfRef | read-only | current | Number of generator test profiles currently using this bandwidth allocation profile for testing. If this is the default BW allocation profile set in the genera… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.9.1.4 | ColumncienaCesBenchmarkBwAllocProfileRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.10 | TablecienaCesBenchmarkBwRatioTable | not-accessible | current | Table providing the list of configured bandwidth ratio per profile, per PCP. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.10.1 | RowcienaCesBenchmarkBwRatioEntry | not-accessible | current | Entry for bandwidth percent per BW Allocation profile and PCP |
| 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.1 | ColumncienaCesBenchmarkBwRatioPcpIndex | not-accessible | current | Index for the PCP |
| 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.2 | ColumncienaCesBenchmarkBwRatioPcp | read-only | current | PCP value associated with this entry. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.10.1.3 | ColumncienaCesBenchmarkBwRatio | read-write | current | Ratio of test bandwidth to allocate to the test session with this PCP value. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11 | TablecienaCesBenchmarkProfileTable | not-accessible | current | Table of profile entries. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1 | RowcienaCesBenchmarkProfileEntry | not-accessible | current | BENCHMARK Profile characteristics. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.1 | ColumncienaCesBenchmarkProfileEntryId | not-accessible | current | Index for BENCHMARK profile records. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.2 | ColumncienaCesBenchmarkProfileEntryName | read-create | current | Name of the profile as entered when created. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.3 | ColumncienaCesBenchmarkProfileEntryBandwidth | read-create | current | Maximum bandwidth to use when generating green test traffic for the profile. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.4 | ColumncienaCesBenchmarkProfileEntryExcessBandwidth | read-create | current | Maximum bandwidth to use when generating yellow test traffic for the profile. When testing for red color, this bandwidth is multiplied by 1.25 |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.5 | ColumncienaCesBenchmarkProfileEntryInterval | read-create | current | Interval between the start of one test group to the start of the next test group. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.6 | ColumncienaCesBenchmarkProfileEntryDuration | read-create | current | Duration of the testing. The test group is repeated until the duration ends. When indefinite is set, test group is run only once to completion |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.7 | ColumncienaCesBenchmarkProfileEntrySetFrameSizeList | read-create | current | Used to replace the existing frame size table with the specified list. More than one values can be listed and are separated by commas. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.8 | ColumncienaCesBenchmarkProfileEntryMaxSearches | read-create | current | For the throughput test, this is the maximum number of searches to find a transmit rate without drops for a given frame size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.9 | ColumncienaCesBenchmarkProfileEntryMaxSamples | read-create | current | For the latency and PDV tests, this is the number of samples to take in order to determine the min, avg and max latency and avg PDV. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.10 | ColumncienaCesBenchmarkProfileEntrySamplingInterval | read-create | current | For the latency and PDV tests, this is the interval, in 100ms, to wait between samples. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.11 | ColumncienaCesBenchmarkProfileEntryFrameLossStartBw | read-create | current | For the frame loss test, this indicates which bandwidth value to use as the starting bandwidth; the maximum bandwidth determined via the throughput test, the b… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.12 | ColumncienaCesBenchmarkProfileEntryVidValidation | read-create | current | Indicates whether VID validation is performed in the classifier or not on the returning packet. If vid validation is set to false, PCP and Color validation are… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.13 | ColumncienaCesBenchmarkProfileEntryPcpValidation | read-create | current | Used to indicate whether the PCP value of the test packet should be used to classifier the reflected packets or not. When color remarking is used, this should … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.14 | ColumncienaCesBenchmarkProfileEntryColorValidation | read-create | current | Used to indicate whether the color bit of the test packet should be used to classifier the reflected packets or not. In color unaware testing, this should be s… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.15 | ColumncienaCesBenchmarkProfileEntryKpiProfileId | read-create | current | Name of a valid KPI profile, from the cienaCesBenchmarkKpiProfileTable, to use when analysing the test results for this profile. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.16 | ColumncienaCesBenchmarkProfileEntryBwAllocProfileId | read-create | current | Id of a valid Bandwidth Allocation profile, from the cienaCesBenchmarkBwAllocProfileTable, used for distributing the profile bandwidth amongst the configured P… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.17 | ColumncienaCesBenchmarkProfileEntryEmixSequenceId | read-create | current | Id of a valid EMIX sequence configured in the cienaCesBenchmarkEmixSequenceTable, to use when y1564 is selected. The EMIX sequence is used instead of the frame… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.18 | ColumncienaCesBenchmarkProfileEntryEncapType | read-create | current | Encapsulation type to use for generated packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.19 | ColumncienaCesBenchmarkProfileEntryPduType | read-create | current | Vlan tag protocol identifier to use for the generated packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.20 | ColumncienaCesBenchmarkProfileEntryDstmac | read-create | current | MAC address to use as the destination MAC address on the generated packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.21 | ColumncienaCesBenchmarkProfileEntrySVid | read-create | current | S-VLAN ID to used for generated packets when encapType is set to QinQ |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.22 | ColumncienaCesBenchmarkProfileEntrySPcp | read-create | current | Bitmap of the S-VLAN PCP (Priority Code Point) value to test with. When RFC2544 test is enabled, only one PCP can be set in the mask. Otherwise, a test session… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.23 | ColumncienaCesBenchmarkProfileEntrySColor | read-create | current | Color of the S-VLAN tag for the test traffic. This is directly related to the value of the DEI bit configured in the VLAN tag of the test traffic. Green traffi… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.24 | ColumncienaCesBenchmarkProfileEntryCVid | read-create | current | C-VLAN ID to used for generated packets when encapType is set to QinQ or dot1q. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.25 | ColumncienaCesBenchmarkProfileEntryCPcp | read-create | current | Bitmap of the C-VLAN PCP (Priority Code Point) value to test with. When RFC2544 test is enabled, only one PCP can be set in the mask. Otherwise, a test session… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.26 | ColumncienaCesBenchmarkProfileEntryCColor | read-create | current | Color of the C-VLAN tag for the test traffic. This is directly related to the value of the DEI bit configured in the VLAN tag of the test traffic. Green traffi… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.27 | ColumncienaCesBenchmarkProfileEntryTpid | read-create | current | Vlan tag protocol identifier to use for the generated packets. The following TPID values are supported by benchmark: 0x8100 0x9100 0x88A8 |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.28 | ColumncienaCesBenchmarkProfileEntryDscp | read-create | current | IP DSCP value to use for the generated packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.29 | ColumncienaCesBenchmarkProfileEntrySrcInetAddrType | read-create | current | Specifies the type of address cienaCesBenchmarkProfileEntrySrcInetAddr belongs to. When set to: ipv4 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compl… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.30 | ColumncienaCesBenchmarkProfileEntrySrcInetAddr | read-create | current | Specifies the unicast source IP address to use in IP test packet. The InetAddress specified here is compliant with RFC 4001. The InetAddressType and the InetAd… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.31 | ColumncienaCesBenchmarkProfileEntryDstInetAddrType | read-create | current | Specifies the type of address cienaCesBenchmarkProfileEntryDstInetAddr belongs to. When set to: ipv4 : cienaCesBenchmarkProfileEntryDstInetAddr should be compl… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.32 | ColumncienaCesBenchmarkProfileEntryDstInetAddr | read-create | current | Specifies the unicast destination IP address to use in IP test packet. The InetAddress specified here is compliant with RFC 4001. The InetAddressType and the I… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.33 | ColumncienaCesBenchmarkProfileEntryCustomPayload | read-create | current | Custom payload to be used on the generated packets. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.34 | ColumncienaCesBenchmarkProfileEntryThroughputTest | read-create | current | Run throughput test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.35 | ColumncienaCesBenchmarkProfileEntryFramelossTest | read-create | current | Run frame loss test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.36 | ColumncienaCesBenchmarkProfileEntryLatencyTest | read-create | current | Run latency test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.37 | ColumncienaCesBenchmarkProfileEntryPdvTest | read-create | current | Run packet delay variation test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.38 | ColumncienaCesBenchmarkProfileEntryBurstTest | read-create | current | Run packet burst test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.39 | ColumncienaCesBenchmarkProfileEntryRfc2544Suite | read-create | current | Run RFC2544 test suite which includes throughput, frame loss and latency tests |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.40 | ColumncienaCesBenchmarkProfileEntryY1564Test | read-create | current | The Y1564 test includes the throughput, frameloss, latency and PDV tests are is run using the configured EMIX sequence. If the profile's EMIX sequence is not c… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41 | ColumncienaCesBenchmarkProfileEntryHwSessionsRequired | read-only | current | This represents the number of hardware sessions required to enable/run a test instance using this profile according to the profile's current configuration. One… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.42 | ColumncienaCesBenchmarkProfileEntryNumOfRef | read-only | current | Number of generator test instances currently using this test profile for testing. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.43 | ColumncienaCesBenchmarkProfileEntryRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12 | TablecienaCesBenchmarkTestInstanceTable | not-accessible | current | Table of test instance entries. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1 | RowcienaCesBenchmarkTestInstanceEntry | not-accessible | current | BENCHMARK test instance characteristics. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.1 | ColumncienaCesBenchmarkTestInstanceEntryId | not-accessible | current | Unique identifier for the test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.2 | ColumncienaCesBenchmarkTestInstanceEntryName | read-create | current | Unique name given to the test instance at creation time. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.3 | ColumncienaCesBenchmarkTestInstanceEntrySubPortId | read-create | current | ID of the sub-port to base this test instance on. The sub-port has to be a child of the port under test associated with an existing entity. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.4 | ColumncienaCesBenchmarkTestInstanceEntryProfileId | read-create | current | Id of an existing test profile to be used with the test instance as the template for testing. A test profile ID has to be specified if this test instance is as… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.5 | ColumncienaCesBenchmarkTestInstanceEntrySvid | read-create | current | S VLAN ID to use for testing. For generator test instances, this over-writes the value defined in the referenced test profile if applicable (encap-type set to … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.6 | ColumncienaCesBenchmarkTestInstanceEntryCvid | read-create | current | C VLAN ID to use for testing. For generator test instances, this over-writes the value defined in the referenced test profile if applicable (encap-type set to … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.7 | ColumncienaCesBenchmarkTestInstanceEntryUntagged | read-create | current | When set to true, this indicates that the test instance is to be associated with untagged data traffic. When this is set, the cvid and svid parameters must be … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.8 | ColumncienaCesBenchmarkTestInstanceEntryDstMac | read-create | current | Destination MAC address to use for generator test instances. When set, this over writes the value specified in the referenced test profile. This field is not a… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.9 | ColumncienaCesBenchmarkTestInstanceEntryAdminState | read-create | current | Indicates the administrative state of the test instance. Upon enabling a test instance, resources are allocated in hardware. For reflector test instances, this… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.10 | ColumncienaCesBenchmarkTestInstanceEntryStarted | read-create | current | Applicable to generator test instances, this indicates whether testing is in progress or not. Setting this attribute to true will initiate testing. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.11 | ColumncienaCesBenchmarkTestInstanceEntryCurrentInterval | read-only | current | Applicable to generator test instances, this indicates the number of intervals of the selected tests have been run, including the current one, in relation to t… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.12 | ColumncienaCesBenchmarkTestInstanceEntryTotalIntervals | read-only | current | Applicable to generator test instances, this indicates the total number of intervals of the selected tests to be run by a single start command on the test inst… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.13 | ColumncienaCesBenchmarkTestInstanceEntryLastIterStart | read-only | current | Date and time of the last iteration that started since the last time the system was rebooted or the statistics were cleared on the test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.14 | ColumncienaCesBenchmarkTestInstanceEntryClearStats | read-create | current | Set to true to clear the results and counters for the test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.15 | ColumncienaCesBenchmarkTestInstanceEntryRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, set this object to 'createAndGo'. To delete a row… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.12.1.16 | ColumncienaCesBenchmarkTestInstanceEntryAssocEntityId | read-only | current | ID of the entity this test instance is associated with (cienaCesBenchmarkEntityEntryId) |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13 | TablecienaCesBenchmarkGenTestSessionAllocationTable | not-accessible | current | Table providing the allocation of hw test session per generator test instance Id, PCP and color. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1 | RowcienaCesBenchmarkGenTestSessionAllocationEntry | not-accessible | current | Test session (aka hardware session) allocation entry. SPECIAL NOTE: It is important to know that when the associated test profile's encapsulation type is set t… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.1 | ColumncienaCesBenchmarkGenTestSessionPcpIndex | not-accessible | current | PCP Index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.2 | ColumncienaCesBenchmarkGenTestSessionColorIndex | not-accessible | current | Color Index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.3 | ColumncienaCesBenchmarkGenTestSessionPcp | read-only | current | PCP value associated with this hw session |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.4 | ColumncienaCesBenchmarkGenTestSessionColor | read-only | current | Color of test traffic associated with this hardware session |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.5 | ColumncienaCesBenchmarkGenTestSessionId | read-only | current | Id of the hardware session allocated to the given test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.6 | ColumncienaCesBenchmarkGenTestSessionEmixSequenceId | read-only | current | EMIX sequence Id used with this session. If zero, it indicates that the the frame size list is being used for the test and cienaCesBenchmarkGenTestSessionCurre… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.7 | ColumncienaCesBenchmarkGenTestSessionCurrentPktSize | read-only | current | Packet size in bytes currently used by the running test. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.8 | ColumncienaCesBenchmarkGenTestSessionThroughputTestState | read-only | current | State of the throughput test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.9 | ColumncienaCesBenchmarkGenTestSessionFramelossTestState | read-only | current | State of the frameloss test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.10 | ColumncienaCesBenchmarkGenTestSessionLatencyTestState | read-only | current | State of the latency test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.11 | ColumncienaCesBenchmarkGenTestSessionPdvTestState | read-only | current | State of the PDV test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.12 | ColumncienaCesBenchmarkGenTestSessionRfc2544TestState | read-only | current | State of the RFC2544 test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.13 | ColumncienaCesBenchmarkGenTestSessionY1564TestState | read-only | current | State of the Y1564 test for this hardware session defined by the test instance id, pcp and color |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.14 | ColumncienaCesBenchmarkGenTestSessionCurrentRate | read-only | current | Traffic rate currently used to generate packets as percent of the line rate |
| 1.3.6.1.4.1.1271.2.1.39.1.1.13.1.15 | ColumncienaCesBenchmarkGenTestSessionSamplesCompleted | read-only | current | When latency and/or pdv is running, this indicates how many samples have been gathered so far. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14 | TablecienaCesBenchmarkTestInstanceStatsTable | not-accessible | current | Table of test instance packet statistics entries. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1 | RowcienaCesBenchmarkTestInstanceStatsEntry | not-accessible | current | Benchmark test instance packet statistics |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.1 | ColumncienaCesBenchmarkTestInstanceStatsRxPkts | read-only | current | Total number of received packets for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.2 | ColumncienaCesBenchmarkTestInstanceStatsRxIpv4Pkts | read-only | current | Total number of IPv4 packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.3 | ColumncienaCesBenchmarkTestInstanceStatsRxIpv4UdpPkts | read-only | current | Total number of IPv4 UDP packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.4 | ColumncienaCesBenchmarkTestInstanceStatsRxIpv6Pkts | read-only | current | Total number of IPv6 packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.5 | ColumncienaCesBenchmarkTestInstanceStatsRxIpv6UdpPkts | read-only | current | Total number of IPv6 UDP packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.6 | ColumncienaCesBenchmarkTestInstanceStatsRxNonIpPkts | read-only | current | Total number of non-IP packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.7 | ColumncienaCesBenchmarkTestInstanceStatsRxUnrecognizedPkts | read-only | current | Total number of unrecognized packets received for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.8 | ColumncienaCesBenchmarkTestInstanceStatsRxDuplicatePkts | read-only | current | Total number of packets received with a duplicate this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.9 | ColumncienaCesBenchmarkTestInstanceStatsRxDuplicatePktsOverflow | read-only | current | When set to true, this indicates that the duplicate pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts mi… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.10 | ColumncienaCesBenchmarkTestInstanceStatsRxOOOPkts | read-only | current | Total number of packets received with an out of order sequence number. The sequence number was less than the expected sequence number for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.11 | ColumncienaCesBenchmarkTestInstanceStatsRxOOOPktsOverflow | read-only | current | When set to true, this indicates that the out of order pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstanceStatsRxOOOPkts might… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.12 | ColumncienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts | read-only | current | Total number of packets received with a sequence number greater then the expected sequence number for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.13 | ColumncienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsOverflow | read-only | current | When set to true, this indicates that the discontinuity in sequence number pkt counter has rolled over in hardware and therefore, cienaCesBenchmarkTestInstance… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.14 | ColumncienaCesBenchmarkTestInstanceStatsRxUdpCheckSumPkts | read-only | current | Total number of UDP packets received with a UDP checksum error. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.14.1.15 | ColumncienaCesBenchmarkTestInstanceStatsTxPkts | read-only | current | Total number of packets transmitted for this test instance. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15 | TablecienaCesBenchmarkGenTestSessionThroughputResultsTable | not-accessible | current | Table of BENCHMARK generator test session throughput results in Mbps. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1 | RowcienaCesBenchmarkGenTestSessionThroughputResultsEntry | not-accessible | current | BENCHMARK generator test session throughput results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.1 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsPcpIndex | not-accessible | current | Index of the PCP value |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.2 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsColorIndex | not-accessible | current | Color index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.3 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndex | not-accessible | current | Frame size index for which those throughput results are for. When EMIX is used, in which case cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId is… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.4 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsPcp | read-only | current | PCP value of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.5 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsColor | read-only | current | Color of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.6 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsFrameSize | read-only | current | Packet size in bytes. If 0, then the cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId indicates the ID of the EMIX sequence used for the test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.7 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId | read-only | current | ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated wit… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.8 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsMin | read-only | current | Minimum throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsMax | read-only | current | Maximum throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.10 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsAvg | read-only | current | Average throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.11 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsIterations | read-only | current | Number of times the test has been run for this packet size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.12 | ColumncienaCesBenchmarkGenTestSessionThroughputResultsKpiResult | read-only | current | Pass or fail results for the test which is determined by comparing the max throughput against the selected KPI test instance's throughput pass criteria. If no … |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16 | TablecienaCesBenchmarkGenTestSessionFramelossResultsTable | not-accessible | current | Table of BENCHMARK generator test session frameloss results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1 | RowcienaCesBenchmarkGenTestSessionFramelossResultsEntry | not-accessible | current | BENCHMARK generator test session frameloss results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.1 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsPcpIndex | not-accessible | current | PCP index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.2 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsColorIndex | not-accessible | current | Color index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.3 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndex | not-accessible | current | Frame size index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.4 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsRateIndex | not-accessible | current | Rate index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.5 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsPcp | read-only | current | PCP value of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.6 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsColor | read-only | current | Color of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.7 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsFrameSize | read-only | current | Packet size in bytes. If 0, then the cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId indicates the ID of the EMIX sequence used for the test |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.8 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId | read-only | current | ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated wit… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.9 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsRate | read-only | current | Rate in percent of line rate. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.10 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsFirst | read-only | current | Percentage of frames lost on first test sequence. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.11 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsSecond | read-only | current | Percentage of frames lost on second test sequence. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.12 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsKpiResult | read-only | current | Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instance's frameloss pass criteria. If no… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.16.1.13 | ColumncienaCesBenchmarkGenTestSessionFramelossResultsResult | read-only | current | Percentage of frames lost on the largest test sequence results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17 | TablecienaCesBenchmarkGenTestSessionLatencyResultsTable | not-accessible | current | Table of BENCHMARK generator test session latency results in usec. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1 | RowcienaCesBenchmarkGenTestSessionLatencyResultsEntry | not-accessible | current | BENCHMARK generator test session latency results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.1 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsPcpIndex | not-accessible | current | PCP index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.2 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsColorIndex | not-accessible | current | Color index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.3 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndex | not-accessible | current | Frame size index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.4 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsPcp | read-only | current | PCP value of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.5 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsColor | read-only | current | Color of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.6 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsFrameSize | read-only | current | Packet size in bytes. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.7 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsEmixSequenceId | read-only | current | ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated wit… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.8 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsMin | read-only | current | Minimum latency recorded for the given packet size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.9 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsMax | read-only | current | Maximum latency recorded for the given packet size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.10 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsAvg | read-only | current | Average latency recorded for the given packet size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.11 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsSamples | read-only | current | Number of samples taken during the test. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.17.1.12 | ColumncienaCesBenchmarkGenTestSessionLatencyResultsKpiResult | read-only | current | Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instance's latency pass criteria. If no K… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18 | TablecienaCesBenchmarkGenTestSessionPdvResultsTable | not-accessible | current | Table of BENCHMARK generator test session packet delay variation results in usec. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1 | RowcienaCesBenchmarkGenTestSessionPdvResultsEntry | not-accessible | current | BENCHMARK generator test session packet delay variation results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.1 | ColumncienaCesBenchmarkGenTestSessionPdvResultsPcpIndex | not-accessible | current | PCP index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.2 | ColumncienaCesBenchmarkGenTestSessionPdvResultsColorIndex | not-accessible | current | Color index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.3 | ColumncienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndex | not-accessible | current | Frame size index associated to those PDV stats. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.4 | ColumncienaCesBenchmarkGenTestSessionPdvResultsPcp | read-only | current | PCP value of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.5 | ColumncienaCesBenchmarkGenTestSessionPdvResultsColor | read-only | current | Color of the test packets associated with those results. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.6 | ColumncienaCesBenchmarkGenTestSessionPdvResultsFrameSize | read-only | current | Packet size in bytes. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.7 | ColumncienaCesBenchmarkGenTestSessionPdvResultsEmixSequenceId | read-only | current | ID of the EMIX sequence that was used for running the test which produced these results. When 0, frame size indicates the size of the test frame associated wit… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.8 | ColumncienaCesBenchmarkGenTestSessionPdvResultsAvg | read-only | current | Average PDV recorded for the given packet size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.9 | ColumncienaCesBenchmarkGenTestSessionPdvResultsSamples | read-only | current | Number of samples used for the test. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.18.1.10 | ColumncienaCesBenchmarkGenTestSessionPdvResultsKpiResult | read-only | current | Pass or fail results for the test which is determined by comparing the frameloss result against the selected KPI test instance's throughput PDV criteria. If no… |
| 1.3.6.1.4.1.1271.2.1.39.1.1.19 | TablecienaCesBenchmarkEmixCharacterSetTable | not-accessible | current | Table of BENCHMARK EMIX character set providing the list of characters that can be used in an EMIX sequence along with their corresponding frame size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.19.1 | RowcienaCesBenchmarkEmixCharacterSetEntry | not-accessible | current | BENCHMARK EMIX character and its associated frame size. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.1 | ColumncienaCesBenchmarkEmixCharacterSetEntryIndex | not-accessible | current | Character index. |
| 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.2 | ColumncienaCesBenchmarkEmixCharacterSetEntryCharacter | read-only | current | EMIX character that can be used for creating an EMIX sequence. The character set currently includes: a b c d e f g h u v w x |
| 1.3.6.1.4.1.1271.2.1.39.1.1.19.1.3 | ColumncienaCesBenchmarkEmixCharacterSetEntryFrameSize | read-only | current | Frame size associated with the character. For h, the frame size is the port under test's MTU and the u character is a custom frame size configurable for each E… |
| 1.3.6.1.4.1.1271.2.2.39 | NodecienaCesBenchmarkNotifications | |||
| 1.3.6.1.4.1.1271.2.2.39.1 | NotificationcienaCesBenchmarkTestStarted | current | The start command has been issued for the given benchmark generator test instance, either via CLI or SNMP. The cienaCesBenchmarkEntityEntryPortId specifies the… | |
| 1.3.6.1.4.1.1271.2.2.39.2 | NotificationcienaCesBenchmarkTestStopped | current | The specified generator test instance has been manually stopped by the user, either via CLI or SNMP, before the testing completed. | |
| 1.3.6.1.4.1.1271.2.2.39.3 | NotificationcienaCesBenchmarkTestCompleted | current | The testing for the specified generator test instance has finished the configured number of iterations as configured in the referenced profile interval and dur… | |
| 1.3.6.1.4.1.1271.2.2.39.4 | NotificationcienaCesBenchmarkTestFailedThroughputKpi | current | The throughput test result for the specified generator test instance is below the specified throughput KPI value for the given PCP and color traffic. | |
| 1.3.6.1.4.1.1271.2.2.39.5 | NotificationcienaCesBenchmarkTestFailedFramelossKpi | current | The frameloss test result for the specified generator test instance exceeds the specified throughput KPI value for the given PCP and color traffic. | |
| 1.3.6.1.4.1.1271.2.2.39.6 | NotificationcienaCesBenchmarkTestFailedLatencyKpi | current | The latency test result for the specified generator test instance exceeds the specified throughput KPI value for the given PCP and color traffic. | |
| 1.3.6.1.4.1.1271.2.2.39.7 | NotificationcienaCesBenchmarkTestFailedPdvKpi | current | The throughput test result for the specified generator test instance is below the specified throughput KPI value for the given PCP and color traffic. | |
| 1.3.6.1.4.1.1271.2.2.39.8 | NotificationcienaCesBenchmarkTestIterationCompleted | current | An iteration of tests for the given test instance has just completed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CienaCesBenchmarkAdminState | INTEGER { disabled(1), enabled(2) } | current | Administrative state of an object. |
| CienaCesBenchmarkColorTest | INTEGER { green(1), yellow(2), greenYellow(3), greenYellowRed(4) } | current | Defines which traffic color needs to be tested. Green test traffic is generated with DEI bit set to 0 and uses the profile bandwidth parameter as the starting bandwidth; yellow test traffic is generated with DEI bit set… |
| CienaCesBenchmarkFramelossKpiPercent | Unsigned32 | current | Percent of the frameloss test staring bandwidth, the frame loss shouldn't exceed for the test to be considered a pass. The value is given as an integer but represent a 4 decimal point percent. Ex: 0.2000 is reported as … |
| CienaCesBenchmarkFramelossResult | Unsigned32 | current | Frame loss results in Percent of frame loss start bandwidth are sent as unsigned integer multitplied by 100 to provide a 2 decimal point accuracy. If result is 12.34 %, it is sent as 1234 and should be divided by 100 by… |
| CienaCesBenchmarkFramelossTestState | INTEGER { idle(1), runningFirstTest(2), waitingForResidualFirstPackets(3), processingFirstResults(4), runningSecondTest(5), waitingForResidualSecondPackets(6), processingSecondResults(7), stoppedByIntervalTimer(8), stoppedByDurationTimer(9), stoppedByUser(10), done(11) } | current | Frame loss test states |
| CienaCesBenchmarkKpiResult | INTEGER { notAvailable(1), pass(2), fail(3) } | current | Provides a pass or fail for the test results compared to the selected KPI profile's pass crieteria for the test. |
| CienaCesBenchmarkLatencyPdvTestState | INTEGER { idle(1), sendingTraffic(2), waitingForTimestampData(3), waitingForResidualPackets(4), processingResults(5), stoppedByIntervalTimer(6), stoppedByDurationTimer(7), stoppedByUser(8), done(9) } | current | Test state for latency and packet delay variation tests. |
| CienaCesBenchmarkPcpBitmap | BITS { pcp0(0), pcp1(1), pcp2(2), pcp3(3), pcp4(4), pcp5(5), pcp6(6), pcp7(7) } | current | Bitmap of the VLAN PCP (Priority Code ) value to test with. When The RFC2544 test is selected in the profile, only 1 PCP bit can be set. For other tests, a test session will be run simultaneously for each PCP set in the… |
| CienaCesBenchmarkRfc2544TestState | INTEGER { idle(1), running(2), stoppedByIntervalTimer(3), stoppedByDurationTimer(4), stoppedByUser(5), done(6) } | current | RFC 2544 test suite state. |
| CienaCesBenchmarkThroughputKpiPercent | Unsigned32 | current | Percent of bandwidth that the maximum throughput result shouldn't go below for the test to be considered a pass. The value is given as an integer but represent a 4 decimal point percent. Ex: 0.2000 is reported as 2000. |
| CienaCesBenchmarkThroughputResult | Unsigned32 | current | Throughput results in Mbps are sent as unsigned integer multiplied by 100 to provide a 2 decimal point accuracy. If result is 123.45 Mbps, it is sent as 12345 and should be divided by 100 by the SNMP application retriev… |
| CienaCesBenchmarkThroughputTestState | INTEGER { idle(1), running(2), waitingForResidualPackets(3), processingResults(4), stoppedByIntervalTimer(5), stoppedByDurationTimer(6), stoppedByUser(7), done(8), txMaxThroughputForYellowTest(9) } | current | Throughput test states |
| CienaCesBenchmarkY1564TestState | INTEGER { idle(1), running(2), stoppedByIntervalTimer(3), stoppedByDurationTimer(4), stoppedByUser(5), done(6) } | current | Y1564 test suite state. |