CIENA-CES-RSVPTE-MIB
39 objects
This MIB module is for the RSVP-TE configuration for MPLS tunnels
Imported Objects
| CIENA-SMI | cienaCesConfig cienaCesNotifications |
| CIENA-TC | CienaGlobalState |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1271.2.1.16 | IdentitycienaCesRsvpteMIB | This MIB module is for the RSVP-TE configuration for MPLS tunnels | ||
| 1.3.6.1.4.1.1271.2.1.16.1 | NodecienaCesRsvpteMIBObjects | |||
| 1.3.6.1.4.1.1271.2.1.16.1.1 | NodecienaCesRsvpteObjects | |||
| 1.3.6.1.4.1.1271.2.1.16.1.1.1 | ScalarcienaCesRsvpteAdminStatus | read-only | current | The desired administrative status of RSVP-TE. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.2 | ScalarcienaCesRsvpteOperStatus | read-only | current | The current operational status of RSVP-TE. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.3 | ScalarcienaCesRsvpteRetryInterval | read-only | current | The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. T… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.4 | ScalarcienaCesRsvpteRetryInfiniteState | read-only | current | The persistent tunnel retry infinity. This is the state which when on, triggers RSVP-TE to try to restore the tunnels infinite times. This object can only be s… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.5 | ScalarcienaCesRsvpteRetryMax | read-only | current | The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsT… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.6 | ScalarcienaCesRsvpteRefreshInterval | read-only | current | The RSVP-TE value, R, which is used to set the average interval between refresh path and RESV messages. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.7 | ScalarcienaCesRsvpteRefreshMultiple | read-only | current | The RSVP-TE value, K, which is the number of unresponded path or RESV refresh attempts that must be made, spaced by the refresh interval, before the state is d… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.8 | ScalarcienaCesRsvpteRfrshSlewDenom | read-only | deprecated | This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewDenominator in this table. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.9 | ScalarcienaCesRsvpteRfrshSlewNumerator | read-only | deprecated | This object is deprecated and the new object to provide this information is cienaCesRsvpteRefreshSlewNumerator in this table. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.10 | ScalarcienaCesRsvpteBlockadeMultiple | read-only | current | The RSVP-TE value, Kb, which is the number of refresh timeout periods after which the blockade state is deleted. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.11 | ScalarcienaCesRsvpteLSPSetupPriority | read-only | current | The setup priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must be… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.12 | ScalarcienaCesRsvpteLSPHoldingPriority | read-only | current | The holding priority to apply to LSPs that are not signaling this parameter. 0 represents the highest priority and 7 the lowest. The value of this object must … |
| 1.3.6.1.4.1.1271.2.1.16.1.1.13 | ScalarcienaCesRsvpteUseHopByHop | read-only | current | A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for the PATH and PATH-TEAR messages it sends. If set, then the IP addresses used in… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.14 | ScalarcienaCesRsvpteRestartCapable | read-only | current | A flag to indicate whether the local node should advertise itself as restart capable. |
| 1.3.6.1.4.1.1271.2.1.16.1.1.15 | ScalarcienaCesRsvpteRestartTime | read-only | current | The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neigh… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.16 | ScalarcienaCesRsvpteRecoveryTime | read-only | current | The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establ… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.17 | ScalarcienaCesRsvpteMinPeerRestart | read-only | current | The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures rela… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.18 | ScalarcienaCesRsvpteRefreshSlewDenominator | read-only | current | The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is i… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.19 | ScalarcienaCesRsvpteRefreshSlewNumerator | read-only | current | The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is inc… |
| 1.3.6.1.4.1.1271.2.1.16.1.1.20 | ScalarcienaCesRsvpteGRAdminStatus | read-only | current | RSVP-TE Graceful restart status (Enabled/Disabled). |
| 1.3.6.1.4.1.1271.2.1.16.1.1.21 | ScalarcienaCesRsvpteGRMode | read-only | current | RSVP-TE Graceful restart Operational status. |
| 1.3.6.1.4.1.1271.2.1.16.1.2 | NodecienaCesRsvpte | |||
| 1.3.6.1.4.1.1271.2.1.16.1.2.1 | TablecienaCesRsvpteIfTable | not-accessible | current | A table of interfaces on which RSVP-TE can be enabled. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1 | RowcienaCesRsvpteIfEntry | not-accessible | current | An entry in the RSVP-TE interface table. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.1 | ColumncienaCesRsvpteIfIndex | not-accessible | current | Interface index. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.2 | ColumncienaCesRsvpteIfName | read-only | current | Interface name. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.3 | ColumncienaCesRsvpteIfIpAddr | read-only | current | Interface IP address. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.4 | ColumncienaCesRsvpteIfMtu | read-only | deprecated | This object is deprecated and no longer in use. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.5 | ColumncienaCesRsvpteIfAdminStatus | read-only | current | RSVP-TE administrative status on this interface. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.6 | ColumncienaCesRsvpteIfOperStatus | read-only | current | RSVP-TE operational status on this interface. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.7 | ColumncienaCesRsvpteIfHelloInterval | read-only | current | RSVP-TE Hello message interval. |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.8 | ColumncienaCesRsvpteIfHelloTolerance | read-only | current | RSVP-TE Hello tolerance defines the number of Hello intervals that can pass without receiving a successful Hello message from a partner before the Hello sessio… |
| 1.3.6.1.4.1.1271.2.1.16.1.2.1.1.9 | ColumncienaCesRsvpteIfAdvertisedLabel | read-only | current | This object indicates what kind of label will be advertised by RSVP-TE for a Label Request received on this L3 interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdvertisedLabel | INTEGER { implicitnull(1), nonreserved(99) } | current | Advertised Label |
| RsvpGRMode | INTEGER { helpNeighbor(1), restartCapable(2), notApplicable(3) } | current | The current GR operational state of RSVP-TE. |
| RsvpOperStatus | INTEGER { operStatusUp(1), operStatusDown(2), operStatusGoingUp(3), operStatusGoingDown(4), operStatusActFailed(5) } | current | The current operational state of RSVP-TE. |