MIB Viewer

CIENA-CES-TIME-SYNC-MIB

58 objects
This MIB module defines objects and associated notifications for the System Timing feature.
Imported Objects
CIENA-GLOBAL-MIBcienaGlobalMacAddress cienaGlobalSeverity
CIENA-SMIcienaCesConfig cienaCesNotifications
CIENA-TCCienaGlobalState
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.1271.2.1.28IdentitycienaCesTimeSyncMIBThis MIB module defines objects and associated notifications for the System Timing feature.
1.3.6.1.4.1.1271.2.1.28.1NodecienaCesTimeSyncMIBObjects
1.3.6.1.4.1.1271.2.1.28.1.1NodecienaCesTimeSyncObjects
1.3.6.1.4.1.1271.2.1.28.1.1.1ScalarcienaCesSyncAdminStateread-onlycurrentGlobally enable/disable Sync
1.3.6.1.4.1.1271.2.1.28.1.1.2ScalarcienaCesSyncOptionTyperead-onlycurrentIndication of which set of SSM values being used. Option 1 is for International standard and Option 2 is for North American.
1.3.6.1.4.1.1271.2.1.28.1.1.3ScalarcienaCesSyncRevertiveModeread-onlycurrentRevertive mode.
1.3.6.1.4.1.1271.2.1.28.1.1.4ScalarcienaCesSyncWaitToRestoreTimerread-onlycurrentUser configured timer for a timing reference source to wait before transitioning from bad to good clock signal.
1.3.6.1.4.1.1271.2.1.28.1.1.5TablecienaCesSyncInputProtectionGroupTablenot-accessiblecurrentA table of protection groups for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1RowcienaCesSyncInputProtectionGroupEntrynot-accessiblecurrentAn entry in this table represents information on a protection group for input timing reference
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.1ColumncienaCesInputPGEntityIdnot-accessiblecurrentThe unique identifier of this input protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.2ColumncienaCesInputPGEntityNameread-onlycurrentThe unique name of this input protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.3ColumncienaCesInputPGPreferredReferenceread-onlycurrentPreferred timing reference source, configured by users.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.4ColumncienaCesInputPGSelectedReferenceread-onlycurrentSystem selected timing reference source.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.5ColumncienaCesInputPGForcedReferenceread-onlycurrentSystem was forced to used this timing reference source.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.6ColumncienaCesInputPGThresholdQualityLevelread-onlycurrentSpecified Quality Level threshold for a reference source being selected.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.7ColumncienaCesInputPGStateread-onlycurrentConfigured state of this protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.8ColumncienaCesInputPGStateDurationread-onlycurrentDuration since the system entered current state.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.9ColumncienaCesInputPGReferenceSwitchCountread-onlycurrentThe number of timing reference switching since the system stared up.
1.3.6.1.4.1.1271.2.1.28.1.1.5.1.10ColumncienaCesInputPGOperationalStatusread-onlycurrentOperational status of this protection group.
1.3.6.1.4.1.1271.2.1.28.1.1.6TablecienaCesSyncInputProtectionUnitTablenot-accessiblecurrentA table of protection units for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1RowcienaCesSyncInputProtectionUnitEntrynot-accessiblecurrentAn entry in this table represents information on a protection unit for input timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.1ColumncienaCesInputPUEntityIdnot-accessiblecurrentThe unique identifier of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.2ColumncienaCesInputPUEntityNameread-onlycurrentThe unique name of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.3ColumncienaCesInputPUPGEntityNameread-onlycurrentThe identifier of the input protection group which this input protection unit belongs to.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.4ColumncienaCesInputPUTimingInterfaceNameread-onlycurrentThe interface name of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.5ColumncienaCesInputPUTimingInterfaceProtocolread-onlycurrentThe interface protocol of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.6ColumncienaCesInputPUUserPriorityread-onlycurrentThe user configured priority of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.7ColumncienaCesInputPUOperationalQLread-onlycurrentOperational clock quality level of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.8ColumncienaCesInputPUForcedQLread-onlycurrentUser configured clock quality level that this input protection unit is forced to operate at.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.9ColumncienaCesInputPUReceivedQLread-onlycurrentActual received clock quality level of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.10ColumncienaCesInputPUSsmEnabledread-onlycurrentEnable/disable reading of actual received clock quality level for this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.11ColumncienaCesInputPUOperationalStatusread-onlycurrentOperational status of this input protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.12ColumncienaCesInputPUBITSSignalModeread-onlycurrentBITS Signal Mode, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.13ColumncienaCesInputPUBITSSignalFormatread-onlycurrentBITS Signal Format, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.6.1.14ColumncienaCesInputPUBITSSignalEncodingread-onlycurrentBITS Signal encoding, set if BITS signal is used as a protection unit.
1.3.6.1.4.1.1271.2.1.28.1.1.7TablecienaCesSyncOutputTablenot-accessiblecurrentA table of output timing references.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1RowcienaCesSyncOutputEntrynot-accessiblecurrentAn entry in this table represents information for an output timing reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.1ColumncienaCesOutputEntityIdnot-accessiblecurrentThe unique identifier of this output reference entity.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.2ColumncienaCesOutputEntityNameread-onlycurrentThe unique name of this output reference entity.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.3ColumncienaCesOutputTimingInterfaceNameread-onlycurrentThe interface name of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.4ColumncienaCesOutputTimingInterfaceProtocolread-onlycurrentThe interface protocol of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.5ColumncienaCesOutputOperationalQLread-onlycurrentOperational clock quality level of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.6ColumncienaCesOutputOperationalStatusread-onlycurrentOperational status of this output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.7ColumncienaCesOutputBITSSignalModeread-onlycurrentBITS Signal Mode, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.8ColumncienaCesOutputBITSSignalFormatread-onlycurrentBITS Signal Format, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.9ColumncienaCesOutputBITSSignalEncodingread-onlycurrentBITS Signal encoding, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.10ColumncienaCesOutputBITSSignalLineBuildoutread-onlycurrentBITS Signal Line Buildout, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.1.28.1.1.7.1.11ColumncienaCesOutputBITSSignalSsmLocationread-onlycurrentBITS Signal Ssm Location, set if BITS signal is used as an output reference.
1.3.6.1.4.1.1271.2.2.28NodecienaCesTimeSyncMIBNotificationPrefix
1.3.6.1.4.1.1271.2.2.28.0NodecienaCesTimeSyncMIBNotifications
1.3.6.1.4.1.1271.2.2.28.0.1NotificationcienaCesSyncInputPUStateChangeNotificationcurrentSent when a timing reference source failed.
1.3.6.1.4.1.1271.2.2.28.0.2NotificationcienaCesSyncInputProtectionGroupStateChangeNotificationcurrentSent when system timing could not lock into a reference source and entered hold over state.
Type Definitions
NameSyntaxStatusDescription
SsmStratumLevelINTEGER { unknown(1), prc(2), ssua(3), ssub(4), sec(5), dnu(6), prs(7), stu(8), st2(9), tnc(10), st3e(11), st3(12), smc(13), st4(14), dus(15), prov(16) }currentInternational and North American SSM Values
SyncBITSSignalEncodingINTEGER { unknown(1), b8zs(2), ami(3), hdb3(4) }currentEncoding method used on T1/E1 BITS signal.
SyncBITSSignalFormatINTEGER { unknown(1), cas(2), cascrc(3), esf(4), fas(5), fascrc(6), sf(7) }currentStation Clock BITS signal format. Esf and sf are applied to t1 signal only where as ccs and cas are applied to e1 signal.
SyncBITSSignalModeINTEGER { modeunknown(1), modet1(2), modee1(3), modej1(4), mode2048khz(5), mode64kcc(6), mode6312khz(7) }currentStation Clock BITS signal mode.
SyncInterfaceProtocolINTEGER { unknown(1), bits(2), synce(3) }currentInterface protocol of an input/output reference.
SyncRefOperationalStatusINTEGER { unknown(1), active(2), selected(3), lossofsignal(4), lossofframe(5), alarmindicationsignal(6), hardwarefault(7), hardwarenotconfigured(8), qlbelowthreshold(9), rxtimeout(10), notauthenticated(11), loopbacktx(12), loopbackrx(13), linkflap(14) }currentOperational status of an input/output reference.