CISCO-5800-HEALTH-MON-MIB
46 objects
This MIB provides a means to monitor the status of a system's health.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.28 | Identitycisco5800HealthMonMIB | This MIB provides a means to monitor the status of a system's health. | ||
| 1.3.6.1.4.1.9.10.28.1 | Nodecisco5800HealthMonObjects | |||
| 1.3.6.1.4.1.9.10.28.1.1 | TableciscoHealthMonStatusTable | not-accessible | current | The table of status maintained by the health monitor. |
| 1.3.6.1.4.1.9.10.28.1.1.1 | RowciscoHealthMonStatusEntry | not-accessible | current | An entry in the status table, containing the information about the status of the health monitoring setup commands. Depending on the configured monitoring type … |
| 1.3.6.1.4.1.9.10.28.1.1.1.1 | ColumnciscoHealthMonStatusIndex | not-accessible | current | Unique index for indexing the ciscoHealthMonStatusTable. This index is for SNMP purposes only, and has no intrinsic meaning. |
| 1.3.6.1.4.1.9.10.28.1.1.1.2 | ColumnciscoHealthMonStatusType | read-only | current | Monitoring type modemUtil(1), trunkUtil(2), iomemUtil(3) |
| 1.3.6.1.4.1.9.10.28.1.1.1.3 | ColumnciscoHealthMonShelfId | read-only | current | This is the shelf-id of the monitored shelf. |
| 1.3.6.1.4.1.9.10.28.1.1.1.4 | ColumnciscoHealthMonAddress | read-only | current | This is the IP address of the monitored shelf. |
| 1.3.6.1.4.1.9.10.28.1.1.1.5 | ColumnciscoHealthMonDescr | read-only | current | Textual description of the utilization type being monitored on a shelf. This description is a short textual label, suitable as a human-sensible identification … |
| 1.3.6.1.4.1.9.10.28.1.1.1.6 | ColumnciscoHealthMonValue | read-only | current | The current value for the monitoring type on a monitored shelf. |
| 1.3.6.1.4.1.9.10.28.1.1.1.7 | ColumnciscoHealthMonThreshold | read-only | current | This is the monitoring threshold value configured through the command line. If the configured monitoring type is io-mem, rmon alarm on the shelf will use this … |
| 1.3.6.1.4.1.9.10.28.1.1.1.8 | ColumnciscoHealthMonThresholdExceedCount | read-only | current | Number of times monitoring value exceeded the configured threshold value. |
| 1.3.6.1.4.1.9.10.28.1.2 | TableciscoHealthMonCountTable | not-accessible | current | The table of mib entries maintained by the health monitor. |
| 1.3.6.1.4.1.9.10.28.1.2.1 | RowciscoHealthMonCountEntry | not-accessible | current | An entry in the count table represents the polled data of ceratin mib variables for a router shelf. System controller will do the polling of the mib variables … |
| 1.3.6.1.4.1.9.10.28.1.2.1.1 | ColumnciscoHealthMonCountIndex | not-accessible | current | Unique index for indexing the ciscoHealthMonCountTable. This unique index represents the shelf-id of the monitored shelf. |
| 1.3.6.1.4.1.9.10.28.1.2.1.2 | ColumnciscoHealthMonT1E1LinesUp | read-only | current | The number of active T1 and E1 lines on a shelf. A line is considered as an active line if it is operationally up. |
| 1.3.6.1.4.1.9.10.28.1.2.1.3 | ColumnciscoHealthMonT1E1LinesDown | read-only | current | The number of inactive T1 and E1 lines on a shelf. This is the special case where a line is counted as down if it is operationally down and administratively up. |
| 1.3.6.1.4.1.9.10.28.1.2.1.4 | ColumnciscoHealthMonActiveDS0 | read-only | current | The number of DS0's that are currently in use. |
| 1.3.6.1.4.1.9.10.28.1.2.1.5 | ColumnciscoHealthMonTotalDS0 | read-only | current | The total number of DS0's on a shelf. This is based on the number of T1 and E1 lines present on the router shelf. Total DS0 = (# of T1 lines - 1 * 24) + 23 + (… |
| 1.3.6.1.4.1.9.10.28.1.2.1.6 | ColumnciscoHealthMonTotalModems | read-only | current | The total number of modems installed on a shelf. This is the polled value for cmSystemInstalledModem from the router shelf. |
| 1.3.6.1.4.1.9.10.28.1.2.1.7 | ColumnciscoHealthMonModemsInUse | read-only | current | The number of modems on a shelf that are in the following states: connected, offHook, loopback, or downloadFirmware. This the polled value for cmSystemModemsIn… |
| 1.3.6.1.4.1.9.10.28.1.2.1.8 | ColumnciscoHealthMonUnavailableModems | read-only | current | The number of modems on a shelf that cannot accept the calls. They are in the following states: unknown, onHook, busiedOut, disabled, bad, or downloadFirmwareF… |
| 1.3.6.1.4.1.9.10.28.1.2.1.9 | ColumnciscoHealthMonIOMemUsed | read-only | current | The number of bytes of IO memory that are currently in use by the applications on the shelf. This is the polled value for ciscoMemoryPoolUsed of io-mem type on… |
| 1.3.6.1.4.1.9.10.28.1.2.1.10 | ColumnciscoHealthMonIOMemFree | read-only | current | The number of bytes of IO memory that are currently available to use on the shelf.This is the polled value for ciscoMemoryPoolFree of io-mem type on the router… |
| 1.3.6.1.4.1.9.10.28.1.2.1.11 | ColumnciscoHealthMonCPUavgBusy5 | read-only | current | 5 minute exponentially-decayed moving average of the CPU busy percentage. This is the polled value for avgBusy5 from the router shelf. |
| 1.3.6.1.4.1.9.10.28.1.2.1.12 | ColumnciscoHealthMonUtilEgressInOctet | read-only | current | This is the percentage utilization of total number of octets received on all the active egress interface, including framing characters. A port is considered as… |
| 1.3.6.1.4.1.9.10.28.1.2.1.13 | ColumnciscoHealthMonUtilEgressOutOctet | read-only | current | This is the percentage utilization of the total number of octets transmitted out on all the active egress interface, including framing characters. A port is co… |
| 1.3.6.1.4.1.9.10.28.1.2.1.14 | ColumnciscoHealthMonShelfLastUpdate | read-only | current | This is the last time at which the system-controller has polled the mib entries from a shelf. However, if system-controller can not talk to that shelf, this en… |
| 1.3.6.1.4.1.9.10.28.1.3 | ScalarciscoHealthMonNumShelves | read-only | current | The total number of shelves monitored by the health monitor. |
| 1.3.6.1.4.1.9.10.28.1.4 | ScalarciscoHealthMonNumT1E1LinesUp | read-only | current | This is the total number of active T1/E1 lines across all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.1.5 | ScalarciscoHealthMonNumT1E1LinesDown | read-only | current | This is the total number of inactive T1/E1 lines across all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.1.6 | ScalarciscoHealthMonNumActiveDS0 | read-only | current | The total number of DS0's in use across all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.1.7 | ScalarciscoHealthMonNumTotalDS0 | read-only | current | The total number of DS0's from all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.1.8 | ScalarciscoHealthMonNumTotalModems | read-only | current | This is the total number of ciscoHealthMonTotalModems from all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.1.9 | ScalarciscoHealthMonNumModemsInUse | read-only | current | This is the total number of ciscoHealthMonModemsInUse from all the monitored shelves . |
| 1.3.6.1.4.1.9.10.28.1.10 | ScalarciscoHealthMonNumUnavailableModems | read-only | current | This is the total number of ciscoHealthMonUnavailableModems from all the monitored shelves. |
| 1.3.6.1.4.1.9.10.28.2 | NodeciscoHealthMonMIBNotificationEnables | |||
| 1.3.6.1.4.1.9.10.28.2.1 | ScalarciscoHealthMonEnableNotification | read-write | current | This variable indicates whether the system produces the ciscoHealthNotification. A false value will prevent notifications from being generated by this system. |
| 1.3.6.1.4.1.9.10.28.3 | NodeciscoHealthMonMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.10.28.3.0 | NodeciscoHealthMonMIBNotifications | |||
| 1.3.6.1.4.1.9.10.28.3.0.1 | NotificationciscoHealthMonNotification | current | A ciscoHealthMonNotification is sent if the measured utilization has crossed the threshold value. It will be generated when the value rises above the threshold… | |
| 1.3.6.1.4.1.9.10.28.4 | Nodecisco5800HealthMonMIBConformance | |||
| 1.3.6.1.4.1.9.10.28.4.1 | Nodecisco5800HealthMonMIBCompliances | |||
| 1.3.6.1.4.1.9.10.28.4.1.1 | Compliancecisco5800HealthMonMIBCompliance | current | The compliance statement for entities which implement the Cisco Health Monitor MIB | |
| 1.3.6.1.4.1.9.10.28.4.2 | Nodecisco5800HealthMonMIBGroups | |||
| 1.3.6.1.4.1.9.10.28.4.2.1 | Groupcisco5800HealthMonMIBGroup | current | A collection of objects providing health monitoring capability to a cisco chassis. |