CISCO-6400-CHASSIS-MIB
94 objects
Add nrpSwitchoverAlarm, nrpSecondaryFailureAlarm, nrpSecondaryRemovedAlarm, and nrpMismatchAlarm.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.27 | Identitycisco6400ChassisMIB | Add nrpSwitchoverAlarm, nrpSecondaryFailureAlarm, nrpSecondaryRemovedAlarm, and nrpMismatchAlarm. | ||
| 1.3.6.1.4.1.9.10.27.1 | Nodecisco6400ChassisMIBObjects | |||
| 1.3.6.1.4.1.9.10.27.1.1 | Nodec64RedundantGroup | |||
| 1.3.6.1.4.1.9.10.27.1.1.1 | Scalarc64MainCPUConfigAutoSync | read-write | current | This object is an OR bit mask indicating various auto-sync configuration: Bit 0, if set, indicates that standard syncable objects are set for auto-sync. The st… |
| 1.3.6.1.4.1.9.10.27.1.1.2 | Scalarc64MainCPUSwitchOver | read-write | current | This object, when read always return a value of ok(1). Setting this object to forceOver(2) will have: For a redundant NSP-A|B, force them to exchange the prima… |
| 1.3.6.1.4.1.9.10.27.1.1.3 | Tablec64SlotConfigTable | not-accessible | current | A list of redundant slot-pair entries. A managment station that wish to create the redundancy entry other than NSP should perform the following steps: Get the … |
| 1.3.6.1.4.1.9.10.27.1.1.3.1 | Rowc64SlotConfigEntry | not-accessible | current | Entry containing information for a particular pair of redundant slots. The object value of c64Slot1Index & c64Slot2Index refer to the pair of ciscoLS1010Module… |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.1 | Columnc64SlotConfigModule1Index | not-accessible | current | This object specify the first slot in the pair of slots to be configured for the redundacy. Its value is obtained from ciscoLS1010ModuleIndex in ciscoLS1010Mod… |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.2 | Columnc64SlotConfigModule2Index | not-accessible | current | This object specify the second slot in the pair of slots to be configured for the redundacy. Its value is the obtained from ciscoLS1010ModuleIndex in ciscoLS10… |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.3 | Columnc64Slot1Name | read-only | current | Name of slot#1 in the pair of slots configured to redundant. |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.4 | Columnc64Slot2Name | read-only | current | Name of slot#2 in the pair of slots configured to redundant. |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.5 | Columnc64SlotConfigPrefIndex | read-create | deprecated | This object specify which slot in the pair of redundancy to be used as prefer slot. The value of: primarySlot(1) is telling the system use the slot referred by… |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.6 | Columnc64SlotSwitchOver | read-create | current | This object, when read always return a value of ok(1). Setting this object to forceOver(2) will have: For a redundant NRP slot pair, force them to exchange the… |
| 1.3.6.1.4.1.9.10.27.1.1.3.1.7 | Columnc64SlotConfigStatus | read-create | current | The status object for the c64SlotTable entry. |
| 1.3.6.1.4.1.9.10.27.1.1.5 | Tablec64SubSlotConfigTable | not-accessible | current | A list of redundant subslot pair entries. A managment station that wish to create the subslot redundancy entry should perform the following steps: Get the cisc… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1 | Rowc64SubSlotConfigEntry | not-accessible | current | Entry containing information for a particular pair of redundant subslots. |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.1 | Columnc64SubSlotRedundantIndex | not-accessible | current | An arbitrary integer-value to uniquely identify a redundant slot pair. This value must remain constant while the NSP is running. It is not guarenteed to be con… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.2 | Columnc64SubSlotConfigModule1Index | not-accessible | current | This object specify the first slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010ModuleIndex in cisco… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.3 | Columnc64SubSlotConfigSubModule1Index | not-accessible | current | This object specify the first sub-slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010SubModuleIndex i… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.4 | Columnc64SubSlotConfigModule2Index | not-accessible | current | This object specify the second slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010ModuleIndex in cisc… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.5 | Columnc64SubSlotConfigSubModule2Index | not-accessible | current | This object specify the second sub-slot in the pair of sub-slots to be configured for the redundancy. Its value is obtained from the ciscoLS1010SubModuleIndex … |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.6 | Columnc64SubSlot1Name | read-only | current | This object is to reflect the string name in the format of #/# for the sub-slot1 in the pair of redundancy. This is produced by agent when the table entry is c… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.7 | Columnc64SubSlot2Name | read-only | current | This object is to reflect the string name in the format of #/# for the sub-slot2 in the pair of redundancy. This is produced by agent when table entry is creat… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.8 | Columnc64SubSlotConfigPrefIndex | read-create | deprecated | This object specify which sub-slot in the pair of redundancy to be used as prefer sub-slot. The value of: primarySubslot(1) is telling the system use the subsl… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.9 | Columnc64SubSlotSwitchOver | read-create | current | This object, when read always return a value of ok(1). Setting this object to forceOver(2) will have the result of: For a redundant subslot card pair, force th… |
| 1.3.6.1.4.1.9.10.27.1.1.5.1.10 | Columnc64SubSlotConfigStatus | read-create | current | The status object for c64SubSlotConfigTable entry. |
| 1.3.6.1.4.1.9.10.27.1.1.6 | Tablec64PortConfigTable | not-accessible | current | A list of redundant port-pair entries. A management station that wish to create the redundant entry should perform the following steps: Get the ciscoLS1010Modu… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1 | Rowc64PortConfigEntry | not-accessible | current | Entry containing information for a particual pair of redundant ports. |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.1 | Columnc64PortConfigModule1Index | not-accessible | current | This object specify the first slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010ModuleIndex in cis… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.2 | Columnc64PortConfigSubModule1Index | not-accessible | current | This object specify the first sub-slot which contain the port to be configured as the redundancy pair. Its value is obtained from ciscoLS1010SubModuleIndex in … |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.3 | Columnc64PortConfigPort1Index | not-accessible | current | This object specify the first port in the pair of ports to be configured for the redundancy. Its value is obtained from ciscoLS1010PortIndex in ciscoLS1010Port… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.4 | Columnc64PortConfigModule2Index | not-accessible | current | This object specify the second slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010ModuleIndex in ci… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.5 | Columnc64PortConfigSubModule2Index | not-accessible | current | This object specify the second sub-slot which contain the port to be configured as the redundancy pair. Its value is obtained from the ciscoLS1010SubModuleInde… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.6 | Columnc64PortConfigPort2Index | not-accessible | current | This object specify the second port in the pair of ports to be configured for the redundancy. Its value is obtained from the ciscoLS1010PortIndex in ciscoLS101… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.7 | Columnc64Port1Name | read-only | current | This object is to reflect the string name in the format of #/#/# for the port1 in the pair of redundancy. This is produced by agent when the table entry is cre… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.8 | Columnc64Port2Name | read-only | current | This object is to reflect the string name in the format of #/#/# for the port2 in the pair of redundancy. This is produced by agent when the table entry is cre… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.9 | Columnc64PortConfigPrefIndex | read-create | current | This object specify which port in the pair of redundancy to be used as prefer port. The value of: primaryPort(1) is telling the system use the port referred by… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.10 | Columnc64PortSwitchOver | read-create | current | This object, when read always return a value of ok(1). Setting this object to one of the acceptable values gives the following results: forceOver(2): Force the… |
| 1.3.6.1.4.1.9.10.27.1.1.6.1.11 | Columnc64PortConfigStatus | read-create | current | The status object for c64PortConfigTable entry. |
| 1.3.6.1.4.1.9.10.27.1.1.7 | Tablec64SonetAPSConfigTable | not-accessible | current | A table containing all instances of Sonet APS configuration informations. To configure any APS objects in this table, the corresponding subslots pair have to b… |
| 1.3.6.1.4.1.9.10.27.1.1.7.1 | Rowc64SonetAPSConfigEntry | not-accessible | current | Entry containing APS information for a particular interface. |
| 1.3.6.1.4.1.9.10.27.1.1.7.1.1 | Columnc64SonetAPSMode | read-create | current | This object is used to set the APS mode on the corresponding interface referenced by ifIndex object. The value linear(1) is the APS mode of linear 1+1 nonrever… |
| 1.3.6.1.4.1.9.10.27.1.1.7.1.2 | Columnc64SonetAPSBERThreshold | read-create | current | This is object is used to set the Bit-Error-Rate threshold at which an APS request of priority 'Signal Degrade' will be posted. Value of 0 to disable the thres… |
| 1.3.6.1.4.1.9.10.27.1.1.7.1.3 | Columnc64SonetAPSSwitchCmd | read-create | current | This object when set except clear(4) is used to post an APS priority request. This request succeeds if no higher-priority request is posted. lockOut(1): locks … |
| 1.3.6.1.4.1.9.10.27.1.1.7.1.4 | Columnc64SonetAPSSFBERThreshold | read-create | current | This is object is used to set the Signal Fail Bit-Error-Rate threshold at which an APS request of priority 'Signal Fail' will be posted. 3 => 10E-3, 4 => 10E-4… |
| 1.3.6.1.4.1.9.10.27.1.1.8 | Tablec64SonetAPSStatsTable | not-accessible | current | A table containing APS statistics and alarms information for each interface. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1 | Rowc64SonetAPSStatsEntry | not-accessible | current | A row in the c64SonetAPSStatsTable which corresponds to the statistics/alarms kept by a particular APS interface. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.1 | Columnc64SonetAPSWorkSectionStatus | read-only | current | This variable indicates the section level status of the working channel in APS. The c64SonetAPSWorkSectionStatus is a bit map represented as a sum of multiple … |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.2 | Columnc64SonetAPSWorkLineStatus | read-only | current | This variable indicates the line level status of the working channel in APS. The c64SonetAPSWorkLineStatus is a bit map represented as a sum of multiple alarms… |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.3 | Columnc64SonetAPSWorkPathStatus | read-only | current | This variable indicates the path level status of the working channel in APS. The c64SonetAPSWorkPathStatus is a bit map represented as a sum of multiple alarms… |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.4 | Columnc64SonetAPSWorkSectionBIPE | read-only | current | This object counts the number of section BIP-8 errors in working channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.5 | Columnc64SonetAPSWorkLineBIPE | read-only | current | This object counts the number of line BIP-8/24 errors in working channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.6 | Columnc64SonetAPSWorkLineFEBE | read-only | current | This object counts the number of line far-end-block-errors in working channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.7 | Columnc64SonetAPSWorkPathBIPE | read-only | current | This object counts the number of path BIP-8 errors in working channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.8 | Columnc64SonetAPSWorkPathFEBE | read-only | current | This object counts the number of path far-end-block-errors in working channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.9 | Columnc64SonetAPSWorkPortStatus | read-only | current | This object indicates the last aps event detected in working port. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.10 | Columnc64SonetAPSProtectSectionStatus | read-only | current | This variable indicates the section level status of the protection channel in APS. The c64SonetAPSProtectSectionStatus is a bit map represented as a sum of mul… |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.11 | Columnc64SonetAPSProtectLineStatus | read-only | current | This variable indicates the line level status of the protection channel in APS. The c64SonetAPSProtectLineStatus is a bit map represented as a sum of multiple … |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.12 | Columnc64SonetAPSProtectPathStatus | read-only | current | This variable indicates the path level status of the protection channel in APS. The c64SonetAPSProtectPathStatus is a bit map represented as a sum of multiple … |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.13 | Columnc64SonetAPSProtectSectionBIPE | read-only | current | This object counts the number of section BIP-8 errors in protection channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.14 | Columnc64SonetAPSProtectLineBIPE | read-only | current | This object counts the number of line BIP-8/24 errors in protection channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.15 | Columnc64SonetAPSProtectLineFEBE | read-only | current | This object counts the number of line far-end-block-errors in protection channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.16 | Columnc64SonetAPSProtectPathBIPE | read-only | current | This object counts the number of path BIP-8 errors in protection channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.17 | Columnc64SonetAPSProtectPathFEBE | read-only | current | This object counts the number of path far-end-block-errors in protection channel. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.18 | Columnc64SonetAPSProtectPortStatus | read-only | current | This object indicates the last aps event detected in protection port. |
| 1.3.6.1.4.1.9.10.27.1.1.8.1.19 | Columnc64SonetAPSChannelStatus | read-only | current | This object indicates the last aps event detected in the APS channel. |
| 1.3.6.1.4.1.9.10.27.1.2 | Nodec64ChassisGroup | |||
| 1.3.6.1.4.1.9.10.27.1.2.1 | Nodec64TelcoAlarmMgmt | |||
| 1.3.6.1.4.1.9.10.27.1.2.1.1 | Scalarc64ChassisFacilityAlarmStatus | read-only | current | This object is an OR bit mask indicating the presence of critical/major/minor telco alarm: Bit 0, if set, indicates the presence of minor alarm Bit 1, if set, … |
| 1.3.6.1.4.1.9.10.27.1.2.1.2 | Scalarc64ChassisClearAlarms | read-write | current | This object is used to clear all, major or minor alarms indication and reset the alarm contacts. When the clear command is done the value of this object will b… |
| 1.3.6.1.4.1.9.10.27.1.2.1.3 | Scalarc64ChassisTempIntakeMinorThreshold | read-write | current | This object is used to set the intake minor temperature alarm threshold in degrees centigrade. The default value is ???. |
| 1.3.6.1.4.1.9.10.27.1.2.1.4 | Scalarc64ChassisTempIntakeMajorThreshold | read-write | current | This object is used to set the intake major temperature alarm threshold in degrees centigrade. The default value is ???. |
| 1.3.6.1.4.1.9.10.27.1.2.1.5 | Scalarc64ChassisTempCoreMinorThreshold | read-write | current | This object is used to set the core minor temperature alarm threshold in degrees centigrade. The default value is ???. |
| 1.3.6.1.4.1.9.10.27.1.2.1.6 | Scalarc64ChassisTempCoreMajorThreshold | read-write | current | This object is used to set the core major temperature alarm threshold in degrees centigrade. The default value is ???. |
| 1.3.6.1.4.1.9.10.27.1.2.1.7 | Scalarc64ChassisTempThresholdAdmin | read-write | current | This object is used to enable/disable various threshold limit. Bit 0, if set to 0 disable the intake minor threshold otherwise enable it. Bit 1, if set to 0 di… |
| 1.3.6.1.4.1.9.10.27.1.2.2 | Tablec64ChassisAlarmTable | not-accessible | current | The table contains the current alarm status in the system. |
| 1.3.6.1.4.1.9.10.27.1.2.2.1 | Rowc64ChassisAlarmEntry | not-accessible | current | Entry containing alarm information occurred in the system. |
| 1.3.6.1.4.1.9.10.27.1.2.2.1.1 | Columnc64ChassisAlarmIndex | read-only | current | An arbitrary integer value to uniquely identify a alarm information entry. |
| 1.3.6.1.4.1.9.10.27.1.2.2.1.2 | Columnc64ChassisAlarmSource | read-only | current | This object indicates the source of alarm. The variable will contain string in the following formats: 'Chassis' indicate the chassis alarms 'Submodule' indicat… |
| 1.3.6.1.4.1.9.10.27.1.2.2.1.3 | Columnc64ChassisAlarmType | read-only | current | This object indicates the type of alarm. |
| 1.3.6.1.4.1.9.10.27.1.2.2.1.4 | Columnc64ChassisAlarmSeverity | read-only | current | This object indicates the severity of the alarm. |
| 1.3.6.1.4.1.9.10.27.1.2.2.1.5 | Columnc64ChassisAlarmACOStatus | read-only | current | This object indicates whether the audible/visible local alarm relay has been locally cut off for this particular alarm source. When this status is 'normal', th… |
| 1.3.6.1.4.1.9.10.27.2 | Nodecisco6400ChassisMIBNotificationPrefix | |||
| 1.3.6.1.4.1.9.10.27.2.0 | Nodecisco6400ChassisMIBNotification | |||
| 1.3.6.1.4.1.9.10.27.2.0.1 | Notificationcisco6400ChassisFailureNotification | current | The notification signifies that the agent detects a change in the c64ChassisAlarmTable, the NMS application should start to poll the c64ChassisAlarmTable to ge… | |
| 1.3.6.1.4.1.9.10.27.3 | Nodecisco6400ChassisMIBConformance | |||
| 1.3.6.1.4.1.9.10.27.3.1 | Nodecisco6400ChassisMIBCompliances | |||
| 1.3.6.1.4.1.9.10.27.3.1.1 | Compliancecisco6400ChassisMIBCompliance | deprecated | The compliance statement for 6400s, used in Santa NSP, which implement the Cisco 6400 Chassis MIB. This compliance statement is deprecated as some objects were… | |
| 1.3.6.1.4.1.9.10.27.3.1.2 | Compliancecisco6400ChassisMIBCompliance2 | current | The compliance statement for 6400s, used in Santa NSP, which implement the Cisco 6400 Chassis MIB | |
| 1.3.6.1.4.1.9.10.27.3.2 | Nodecisco6400ChassisMIBGroups | |||
| 1.3.6.1.4.1.9.10.27.3.2.1 | Groupcisco6400RedundantGroup | deprecated | A collection of objects providing satan redundancy config. and information. This RFC 2155-level group was deprecated when the c64SlotConfigPrefIndex and c64Sub… | |
| 1.3.6.1.4.1.9.10.27.3.2.2 | Groupcisco6400ChassisMIBGroup | current | A collection of objects providing santa telco alarm information. | |
| 1.3.6.1.4.1.9.10.27.3.2.3 | Groupcisco6400RedundantGroup2 | current | A collection of objects providing satan redundancy config. and information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| APSEventStatus | INTEGER { good(1), noHardware(2), doNotRevert(3), manualSwitch(4), signgalDegrade(5), forceSwitch(6), lockOut(7), adminDown(8) } | current | APS event status of APS channel. |