CISCO-ADAPTER-MIB
33 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9 | Nodecisco | |||
| 1.3.6.1.4.1.9.5 | Nodeworkgroup | |||
| 1.3.6.1.4.1.9.5.2 | NodeadapterCard | |||
| 1.3.6.1.4.1.9.5.2.1 | ScalaradptrNumber | read-only | mandatory | The number of Cisco network adapter cards in the machine. |
| 1.3.6.1.4.1.9.5.2.2 | TableadptrTable | not-accessible | mandatory | A list of adapter table entries. The number of entries is given by adptrNumber. |
| 1.3.6.1.4.1.9.5.2.2.1 | RowadptrEntry | not-accessible | mandatory | An adapter table entry containing information about a Cisco network adapter card. |
| 1.3.6.1.4.1.9.5.2.2.1.1 | ColumnadptrIndex | read-only | mandatory | A unique value for each Cisco adapter card in the machine. The value ranges between 1 and the value of adptrNumber. The value for each adapter card must remain… |
| 1.3.6.1.4.1.9.5.2.2.1.2 | ColumnadptrType | read-only | mandatory | The type of adapter card. |
| 1.3.6.1.4.1.9.5.2.2.1.3 | ColumnadptrSerialNumber | read-only | mandatory | The serial number of the adapter card. |
| 1.3.6.1.4.1.9.5.2.2.1.4 | ColumnadptrHwHiVersion | read-only | mandatory | The high part of the hardware version of the adapter card. For example, if the hardware version is 3.1, the value of adptrHwHiVersion is 3. |
| 1.3.6.1.4.1.9.5.2.2.1.5 | ColumnadptrHwLoVersion | read-only | mandatory | The low part of the hardware version of the adapter card. For example, if the hardware version is 3.1, the value of adptrHwLoVersion is 1. |
| 1.3.6.1.4.1.9.5.2.2.1.6 | ColumnadptrFwHiVersion | read-only | mandatory | The high part of the firmware version of the adapter card. For example, if the firmware version is 3.1, the value of adptrFwHiVersion is 3. |
| 1.3.6.1.4.1.9.5.2.2.1.7 | ColumnadptrFwLoVersion | read-only | mandatory | The low part of the firmware version of the adapter card. For example, if the firmware version is 3.1, the value of adptrFwLoVersion is 1. |
| 1.3.6.1.4.1.9.5.2.2.1.8 | ColumnadptrSwHiVersion | read-only | mandatory | The high part of the software version number. For example, if the software version is 3.1, the value of adptrSwHiVersion is 3. |
| 1.3.6.1.4.1.9.5.2.2.1.9 | ColumnadptrSwLoVersion | read-only | mandatory | The low part of the software version number. For example, if the software version is 3.1, the value of adptrSwLoVersion is 1. |
| 1.3.6.1.4.1.9.5.2.2.1.10 | ColumnadptrStatus | read-only | mandatory | The operational status of the adapter card. If the status is not ok(2), the value of adptrSelfTestResult gives more detailed information about the adapter card… |
| 1.3.6.1.4.1.9.5.2.2.1.11 | ColumnadptrSelfTestResult | read-only | mandatory | The result of the adapter card's self test. A zero indicates that the adapter passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.9.5.2.2.1.13 | ColumnadptrDriverHiVersion | read-only | mandatory | The high part of the driver version number. For example, if the driver version is 3.1, the value of adptrDriverHiVersion is 3. |
| 1.3.6.1.4.1.9.5.2.2.1.14 | ColumnadptrDriverLoVersion | read-only | mandatory | The low part of the driver version number. For example, if the driver version is 3.1, the value of adptrDriverLoVersion is 1. |
| 1.3.6.1.4.1.9.5.2.2.1.17 | ColumnadptrMediaType | read-only | mandatory | The type of physical layer medium dependent interface on the adapter port(s). |
| 1.3.6.1.4.1.9.5.2.2.1.18 | ColumnadptrModel | read-only | mandatory | The manufacturer's model number for the adapter. |
| 1.3.6.1.4.1.9.5.2.3 | TableadptrTrapReceiverTable | not-accessible | mandatory | The adapter trap receiver table (0 to 10 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this ad… |
| 1.3.6.1.4.1.9.5.2.3.1 | RowadptrTrapReceiverEntry | not-accessible | mandatory | A trap receiver table entry. |
| 1.3.6.1.4.1.9.5.2.3.1.1 | ColumnadptrTrapReceiverType | read-write | mandatory | Setting this object to invalid(2) removes the corresponding entry from the adptrTrapReceiverTable. To add a new entry to the adptrTrapReceiverTable, set the ad… |
| 1.3.6.1.4.1.9.5.2.3.1.2 | ColumnadptrTrapReceiverAddr | read-only | mandatory | IP address for trap receiver. |
| 1.3.6.1.4.1.9.5.2.3.1.3 | ColumnadptrTrapReceiverComm | read-write | mandatory | Community string used for trap messages to this trap receiver. |
| 1.3.6.1.4.1.9.5.2.4 | TableadptrCommunityTable | not-accessible | mandatory | The adapter community table (4 entries). This table lists community strings and their access levels. When an SNMP message is received by this adapter, the comm… |
| 1.3.6.1.4.1.9.5.2.4.1 | RowadptrCommunityEntry | not-accessible | mandatory | A community table entry. |
| 1.3.6.1.4.1.9.5.2.4.1.1 | ColumnadptrCommunityAccess | read-only | mandatory | A value of readWriteAll(4) allows the community to read and write all objects in the MIB. A value of readWrite(3) allows the community to read and write all ob… |
| 1.3.6.1.4.1.9.5.2.4.1.2 | ColumnadptrCommunityString | read-write | mandatory | Configurable community string with access rights defined by the value of adptrCommunityAccess. |
| 1.3.6.1.4.1.9.5.2.5 | ScalaradptrMgmtType | read-only | mandatory | The type of network management for the adapter. |
| 1.3.6.1.4.1.9.5.2.6 | ScalaradptrMgmtHiVersion | read-only | mandatory | The high part of the network management version number. For example, if the network management version is 3.1, the value of adptrMgmtHiVersion is 3. |
| 1.3.6.1.4.1.9.5.2.7 | ScalaradptrMgmtLoVersion | read-only | mandatory | The low part of the network management version number. For example, if the network management version is 3.1, the value of adptrMgmtLoVersion is 1. |