CISCO-APS-MIB
76 objects
This management information module supports the configuration and management of SONET linear APS groups. The definitions and descriptions used in this mib have been derived from Synchronous Optical Network (SONET) Transport Systems: Common Generic Criteria, GR-253-CORE Revision 2, January 1999,section 5.3. The MIB is also consistent with the Multiplex Section Protection (MSP) protocol as specified in ITU-T Recommendation G.783, Characteristics of synchronous digital hierarchy (SDH) equipment function blocks, Annex A and B. This MIB was extracted from internet draft draft-ietf-atommib-sonetaps-mib-05.txt for SONET Linear APS architectures, by J. Johnson, M. Thatcher, and J. Kuhfeld.
Imported Objects
| CISCO-SMI | ciscoExperiment |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.10.71 | IdentitycApsMIB | This management information module supports the configuration and management of SONET linear APS groups. The definitions and descriptions used in this mib have… | ||
| 1.3.6.1.4.1.9.10.71.1 | NodecApsMIBObjects | |||
| 1.3.6.1.4.1.9.10.71.1.1 | NodecApsConfig | |||
| 1.3.6.1.4.1.9.10.71.1.1.1 | ScalarcApsConfigGroups | read-only | current | The count of APS groups. This count includes all rows in cApsConfigTable. |
| 1.3.6.1.4.1.9.10.71.1.1.2 | TablecApsConfigTable | not-accessible | current | This table lists the APS groups that have been configured on the system. |
| 1.3.6.1.4.1.9.10.71.1.1.2.1 | RowcApsConfigEntry | not-accessible | current | A conceptual row in the cApsConfigTable. |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.1 | ColumncApsConfigName | not-accessible | current | A textual name for the APS group. |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.2 | ColumncApsConfigRowStatus | read-create | current | The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Also, all associated … |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.3 | ColumncApsConfigMode | read-create | current | The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. oneToN The 1:n architecture all… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.4 | ColumncApsConfigRevert | read-create | current | The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received. revertive When the condition… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.5 | ColumncApsConfigDirection | read-create | current | The directional mode of the APS group. unidirectional The unidirectional mode provides protection in one direction. bidirectional The bidirectional mode provid… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.6 | ColumncApsConfigExtraTraffic | read-create | current | This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must be set to disabled if the archi… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.7 | ColumncApsConfigSdBerThreshold | read-create | current | The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.8 | ColumncApsConfigSfBerThreshold | read-create | current | The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.9 | ColumncApsConfigWaitToRestore | read-create | current | The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before rever… |
| 1.3.6.1.4.1.9.10.71.1.1.2.1.10 | ColumncApsConfigCreationTime | read-only | current | The value of sysUpTime at the time the row was created |
| 1.3.6.1.4.1.9.10.71.1.2 | TablecApsStatusTable | not-accessible | current | This table provides status information about APS groups that have been configured on the system. |
| 1.3.6.1.4.1.9.10.71.1.2.1 | RowcApsStatusEntry | not-accessible | current | A conceptual row in the cApsStatusTable. Entries in this table are created as a side effect of row addition in cApsConfigTable. |
| 1.3.6.1.4.1.9.10.71.1.2.1.1 | ColumncApsStatusK1K2Rcv | read-only | current | The current value of the K1 and K2 bytes received on the protection channel. |
| 1.3.6.1.4.1.9.10.71.1.2.1.2 | ColumncApsStatusK1K2Trans | read-only | current | The current value of the K1 and K2 bytes transmitted on the protection channel. |
| 1.3.6.1.4.1.9.10.71.1.2.1.3 | ColumncApsStatusCurrent | read-only | current | The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which indicates the architecture and K2… |
| 1.3.6.1.4.1.9.10.71.1.2.1.4 | ColumncApsStatusModeMismatches | read-only | current | A count of Mode Mismatch conditions. |
| 1.3.6.1.4.1.9.10.71.1.2.1.5 | ColumncApsStatusChannelMismatches | read-only | current | A count of Channel Mismatch conditions. |
| 1.3.6.1.4.1.9.10.71.1.2.1.6 | ColumncApsStatusPSBFs | read-only | current | A count of Protection Switch Byte Failure conditions. This condition occurs when either an inconsistent APS byte or an invalid code is detected. An inconsisten… |
| 1.3.6.1.4.1.9.10.71.1.2.1.7 | ColumncApsStatusFEPLFs | read-only | current | A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte. |
| 1.3.6.1.4.1.9.10.71.1.2.1.8 | ColumncApsStatusSwitchedChannel | read-only | current | This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values… |
| 1.3.6.1.4.1.9.10.71.1.3 | NodecApsMap | |||
| 1.3.6.1.4.1.9.10.71.1.3.1 | ScalarcApsChanLTEs | read-only | current | The count of SONET LTE interfaces on the system. Each interface that is included has an ifType value of sonet(39). |
| 1.3.6.1.4.1.9.10.71.1.3.2 | TablecApsMapTable | not-accessible | current | This table lists the SONET LTE interfaces on the system. Each interface that is listed has an ifType value of sonet(39). |
| 1.3.6.1.4.1.9.10.71.1.3.2.1 | RowcApsMapEntry | not-accessible | current | A conceptual row in the cApsMapTable. |
| 1.3.6.1.4.1.9.10.71.1.3.2.1.1 | ColumncApsMapIfIndex | not-accessible | current | The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). |
| 1.3.6.1.4.1.9.10.71.1.3.2.1.2 | ColumncApsMapGroupName | read-only | current | A textual name for the APS group which this channel is included in. If the channel is not part of an APS group this value is set to a string of size 0. When an… |
| 1.3.6.1.4.1.9.10.71.1.3.2.1.3 | ColumncApsMapChanNumber | read-only | current | This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. If the SONE… |
| 1.3.6.1.4.1.9.10.71.1.4 | TablecApsChanConfigTable | not-accessible | current | This table lists the APS channels that have been configured in APS groups. |
| 1.3.6.1.4.1.9.10.71.1.4.1 | RowcApsChanConfigEntry | not-accessible | current | A conceptual row in the cApsChanConfigTable. |
| 1.3.6.1.4.1.9.10.71.1.4.1.1 | ColumncApsChanConfigGroupName | not-accessible | current | A textual name for the APS group which this channel is included in. |
| 1.3.6.1.4.1.9.10.71.1.4.1.2 | ColumncApsChanConfigNumber | not-accessible | current | This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. This field … |
| 1.3.6.1.4.1.9.10.71.1.4.1.3 | ColumncApsChanConfigRowStatus | read-create | current | The status of this APS channel entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. A row in the cApsCh… |
| 1.3.6.1.4.1.9.10.71.1.4.1.4 | ColumncApsChanConfigIfIndex | read-create | current | The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39). The value of this object must be unique among all instances of cApsCha… |
| 1.3.6.1.4.1.9.10.71.1.4.1.5 | ColumncApsChanConfigPriority | read-create | current | The priority of the channel. This field deterimines whether high or low priority SD and SF codes are used in K1 requests. This field is only applicable if the … |
| 1.3.6.1.4.1.9.10.71.1.5 | TablecApsCommandTable | not-accessible | current | This table allows commands to be sent to configured APS groups. |
| 1.3.6.1.4.1.9.10.71.1.5.1 | RowcApsCommandEntry | not-accessible | current | A conceptual row in the cApsCommandTable. This row exists only if the associated cApsConfigEntry is active. |
| 1.3.6.1.4.1.9.10.71.1.5.1.1 | ColumncApsCommandSwitch | read-write | current | Allows the initiation of an APS switch command on the APS group and channel specified by the index values. If the APS switch command cannot be executed because… |
| 1.3.6.1.4.1.9.10.71.1.5.1.2 | ColumncApsCommandControl | read-write | current | Allows the initiation of an APS control command on the APS group and channel specified by the index values. When read this object returns the last command writ… |
| 1.3.6.1.4.1.9.10.71.1.6 | TablecApsChanStatusTable | not-accessible | current | This table contains status information for all SONET LTE interfaces that are included in APS groups. |
| 1.3.6.1.4.1.9.10.71.1.6.1 | RowcApsChanStatusEntry | not-accessible | current | A conceptual row in the cApsChanStatusTable. A row in this table is created as a side effect of row addition in the cApsChanConfigTable. The cApsChanStatusTabl… |
| 1.3.6.1.4.1.9.10.71.1.6.1.1 | ColumncApsChanStatusCurrent | read-only | current | Indicates the current state of the port. lockedOut This bit, when applied to a working channel, indicates that the channel is prevented from switching to the p… |
| 1.3.6.1.4.1.9.10.71.1.6.1.2 | ColumncApsChanStatusSignalDegrades | read-only | current | A count of Signal Degrade conditions. This condition occurs when the line Bit Error Rate exceeds the currently configured threshold. |
| 1.3.6.1.4.1.9.10.71.1.6.1.3 | ColumncApsChanStatusSignalFailures | read-only | current | A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Lin… |
| 1.3.6.1.4.1.9.10.71.1.6.1.4 | ColumncApsChanStatusSwitchovers | read-only | current | The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line… |
| 1.3.6.1.4.1.9.10.71.1.6.1.5 | ColumncApsChanStatusLastSwitchover | read-only | current | The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to the protection line, or this cha… |
| 1.3.6.1.4.1.9.10.71.1.6.1.6 | ColumncApsChanStatusSwitchoverSeconds | read-only | current | The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of seconds that service was carried on… |
| 1.3.6.1.4.1.9.10.71.2 | NodecApsMIBNotifications | |||
| 1.3.6.1.4.1.9.10.71.2.0 | NodecApsNotificationsPrefix | |||
| 1.3.6.1.4.1.9.10.71.2.0.1 | NotificationcApsEventSwitchover | current | An cApsEventSwitchover notification is sent when the value of an instance of cApsChanStatusSwitchovers increments. | |
| 1.3.6.1.4.1.9.10.71.2.0.2 | NotificationcApsEventModeMismatch | current | An cApsEventModeMismatch notification is sent when the value of an instance of cApsStatusModeMismatches increments. | |
| 1.3.6.1.4.1.9.10.71.2.0.3 | NotificationcApsEventChannelMismatch | current | An cApsEventChannelMismatch notification is sent when the value of an instance of cApsStatusChannelMismatches increments. | |
| 1.3.6.1.4.1.9.10.71.2.0.4 | NotificationcApsEventPSBF | current | An cApsEventPSBF notification is sent when the value of an instance of cApsStatusPSBFs increments. | |
| 1.3.6.1.4.1.9.10.71.2.0.5 | NotificationcApsEventFEPLF | current | An cApsEventFEPLFs notification is sent when the value of an instance of cApsStatusFEPLFs increments. | |
| 1.3.6.1.4.1.9.10.71.3 | NodecApsMIBConformance | |||
| 1.3.6.1.4.1.9.10.71.3.1 | NodecApsGroups | |||
| 1.3.6.1.4.1.9.10.71.3.1.1 | GroupcApsConfigGeneral | current | A collection of cApsConfigTable objects providing configuration information applicable to all linear APS groups. | |
| 1.3.6.1.4.1.9.10.71.3.1.2 | GroupcApsConfigWtr | current | The cApsConfigTable object that provides information which is applicable to groups supporting a configurable WTR period. | |
| 1.3.6.1.4.1.9.10.71.3.1.3 | GroupcApsCommandOnePlusOne | current | The cApsCommandTable object which is applicable to groups implementing the linear APS 1+1 architecture. Also, set operations must be supported. | |
| 1.3.6.1.4.1.9.10.71.3.1.4 | GroupcApsCommandOneToN | current | A collection of cApsCommandTable objects which are applicable to groups implementing the linear APS 1:n architecture. Also, set operations must be supported. | |
| 1.3.6.1.4.1.9.10.71.3.1.5 | GroupcApsStatusGeneral | current | A collection of cApsStatusTable objects providing status information applicable to all linear APS groups. | |
| 1.3.6.1.4.1.9.10.71.3.1.6 | GroupcApsChanGeneral | current | A collection of channel objects providing information applicable to all linear APS channels. | |
| 1.3.6.1.4.1.9.10.71.3.1.7 | GroupcApsChanOneToN | current | The cApsChanConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture. | |
| 1.3.6.1.4.1.9.10.71.3.1.8 | GroupcApsTotalsGroup | current | A collection of objects providing optional counts of configured APS groups and SONET LTE interfaces. | |
| 1.3.6.1.4.1.9.10.71.3.1.9 | GroupcApsMapGroup | current | A collection of cApsMapTable objects providing a mapping from sonet(39) InterfaceIndex to group name and channel number for assigned APS channels and a list of… | |
| 1.3.6.1.4.1.9.10.71.3.1.10 | GroupcApsEventOptional | current | A collection of SONET linear APS notifications that may optionally be implemented. | |
| 1.3.6.1.4.1.9.10.71.3.2 | NodecApsCompliances | |||
| 1.3.6.1.4.1.9.10.71.3.2.1 | CompliancecApsCompliance | read-only | current | The compliance statement for linear APS groups. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CApsControlCommand | INTEGER { noCmd(1), lockoutWorkingChannel(2), clearLockoutWorkingChannel(3) } | current | An APS control command applies only to LTE that support the 1:n architecture and performs the following actions. The Control command values are: noCmd This value should be returned by a read request when no control comm… |
| CApsK1K2 | OCTET STRING (SIZE (2)) | current | This Textual Convention describes an object that stores a SONET K1 and K2 byte Aps protocol field. K1 is located in the first octet, K2 is located in the second octet. Bits are numbered from left to right, with the most… |
| CApsSwitchCommand | INTEGER { noCmd(1), clear(2), lockoutOfProtection(3), forcedSwitchWorkToProtect(4), forcedSwitchProtectToWork(5), manualSwitchWorkToProtect(6), manualSwitchProtectToWork(7), exercise(8) } | current | An Aps switch command allows a user to perform protection switch actions. The Switch command values are: noCmd This value should be returned by a read request when no switch command has been written to the object in que… |