CISCO-ATM-CELL-LAYER-MIB
139 objects
The MIB module to describe ATM cell layer objects and statistics of a physical line.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.133 | IdentityciscoAtmCellLayerMIB | The MIB module to describe ATM cell layer objects and statistics of a physical line. | ||
| 1.3.6.1.4.1.9.9.133.1 | NodeciscoAtmCellLayerMIBObjects | |||
| 1.3.6.1.4.1.9.9.133.1.1 | NodecaclConfig | |||
| 1.3.6.1.4.1.9.9.133.1.1.1 | TablecaclConfigTable | not-accessible | current | The Atm cell layer configuration table. An entry in this table is automatically created for each entry in the ifTable which has an ifType of atm(37), and which… |
| 1.3.6.1.4.1.9.9.133.1.1.1.1 | RowcaclConfigEntry | not-accessible | current | An entry in the caclConfigTable. The table is indexed by the ifIndex of the atm(37) interface. |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.1 | ColumncaclNullCellHeader | read-write | current | The first four bytes of the ATM header to be used for Null cells. Generally, idle cells are inserted into a cell stream as a mechanism for rate adaptation betw… |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.2 | ColumncaclNullCellPayload | read-write | current | Null cell Payload definition. The idle cell information field can be specified in this object. It applies to both transmitted as well as received cells. The de… |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.3 | ColumncaclHecCosetEnable | read-write | current | If enabled, the algorithm of Coset Polynomial Addition is applied to do header error check calculations. It applies to transmitted as well as received cells. |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.4 | ColumncaclPayloadScramblingEnable | read-write | current | An indication of whether Payload Scrambling is enabled. |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.5 | ColumncaclTimeElapsed | read-only | current | The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in th… |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.6 | ColumncaclValidIntervals | read-only | current | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, … |
| 1.3.6.1.4.1.9.9.133.1.1.1.1.7 | ColumncaclInvalidIntervals | read-only | current | The number of near end intervals in the range from 0 to caclValidIntervals for which no data is available. This object will typically be zero except in cases w… |
| 1.3.6.1.4.1.9.9.133.1.2 | NodecaclStats | |||
| 1.3.6.1.4.1.9.9.133.1.2.1 | TablecaclStatsTable | not-accessible | current | The ATM Cell layer stats table is for the cell layer over a physical line. There is an entry for each SONET, DS3 or DS1 line. The table maintains objects that … |
| 1.3.6.1.4.1.9.9.133.1.2.1.1 | RowcaclStatsEntry | not-accessible | current | An entry for the ATM Cell layer statistics for a physical line. These are realtime statistics which are collected per cell layer over a physical line. Entries … |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.1 | ColumncaclInRcvCLP0Cells | read-only | current | The number of cells received on the interface with CLP0 bit set. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.2 | ColumncaclInRcvCLP1Cells | read-only | current | The number of cells received on the interface with CLP1 bit set. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.3 | ColumncaclInValidOAMCells | read-only | current | The number of valid Operation and Maintainance(OAM) cells received on the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.4 | ColumncaclInErrOAMCells | read-only | current | The number of errored OAM cells received on the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.5 | ColumncaclInGfcCells | read-only | current | The number of non-zero GFC cells received on the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.6 | ColumncaclInVpiVciErrCells | read-only | current | The number of cells received from the interface with unknown Vpi/Vci values. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.7 | ColumncaclInLastUnknVpi | read-only | current | The last unknown Vpi value. This object is valid only if 'caclInVpiVciErrCells' is non-zero. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.8 | ColumncaclInLastUnknVci | read-only | current | The last unknown Vci value. This object is valid only if 'caclInVpiVciErrCells' is non-zero. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.9 | ColumncaclInXmtCLP0Cells | read-only | current | The number of CLP0 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.10 | ColumncaclInXmtCLP1Cells | read-only | current | The number of CLP1 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.11 | ColumncaclInValidRMCells | read-only | current | The number of Valid RM cells received from the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.12 | ColumncaclInRcvIdleCells | read-only | current | The number of idle cells received from the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.13 | ColumncaclInHecErrDiscCells | read-only | current | Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is the number of received cells wh… |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.14 | ColumncaclInHecErrCorrectedCells | read-only | current | The number of received cells which had HEC errors that were corrected. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.15 | ColumncaclInUpcCLP0DiscCells | read-only | current | In order to allocate resources fairly among different users, networks police traffic at resource access points. The traffic enforcement or policing taken at a … |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.16 | ColumncaclInUpcTotalDiscCells | read-only | current | The total number of cells(CLP0+1) discarded due to policing. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.17 | ColumncaclInUpcTotalNonCompCells | read-only | current | The number of non-compliant cells (cells that are not compliant to a specific traffic profile) discarded due to policing. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.18 | ColumncaclOutXmtCLP0Cells | read-only | current | The number of CLP0 cells transmitted to interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.19 | ColumncaclOutXmtCLP1Cells | read-only | current | The number of CLP1 cells transmitted to interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.20 | ColumncaclOutValidOAMCells | read-only | current | The number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.21 | ColumncaclOutErrOAMCells | read-only | current | The number of errored OAM cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.22 | ColumncaclOutVpiVciErrCells | read-only | current | The number of cells with unknown vpi vci value in received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.23 | ColumncaclOutRcvCLP0Cells | read-only | current | The number of CLP0 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.24 | ColumncaclOutRcvCLP1Cells | read-only | current | The number of CLP1 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.25 | ColumncaclOutRcvValidRMCells | read-only | current | The number of Valid RM cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.26 | ColumncaclOutRcvIdleCells | read-only | current | The number of idle cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.27 | ColumncaclHInRcvCLP0Cells | read-only | current | The 64-bit version of caclInRcvCLP0Cells. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.28 | ColumncaclHInRcvCLP1Cells | read-only | current | The 64-bit version of caclnRcvCLP1Cells. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.29 | ColumncaclHOutXmtCLP0Cells | read-only | current | The 64-bit version of caclOutXmtCLP0Cells. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.30 | ColumncaclHOutXmtCLP1Cells | read-only | current | The 64-bit version of caclOutXmtCLP1Cells. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.31 | ColumncaclHighInRcvCLP0Cells | read-only | current | The upper 32 bit of the number of cells received on the interface with CLP0 bit set. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.32 | ColumncaclHighInRcvCLP1Cells | read-only | current | The upper 32 bit of the number of cells received on the interface with CLP1 bit set. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.33 | ColumncaclHighInValidOAMCells | read-only | current | The upper 32 bit of the number of valid Operation and Maintainance(OAM) cells received on the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.34 | ColumncaclHighInVpiVciErrCells | read-only | current | The upper 32 bit of the number of cells received from the interface with unknown Vpi/Vci values. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.35 | ColumncaclHighInXmtCLP0Cells | read-only | current | The upper 32 bit of the number of CLP0 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.36 | ColumncaclHighInXmtCLP1Cells | read-only | current | The upper 32 bit of the number of CLP1 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.37 | ColumncaclHighInHecErrDiscCells | read-only | current | Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is the upper 32 bit of the number … |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.38 | ColumncaclHighInHecErrCorrectedCells | read-only | current | The upper 32 bit of the number of received cells which had HEC errors that were corrected. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.39 | ColumncaclHighOutXmtCLP0Cells | read-only | current | The upper 32 bit of the number of CLP0 cells transmitted to interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.40 | ColumncaclHighOutXmtCLP1Cells | read-only | current | The upper 32 bit of the number of CLP1 cells transmitted to interface. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.41 | ColumncaclHighOutValidOAMCells | read-only | current | The upper 32 bit of the number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.42 | ColumncaclHighOutRcvCLP0Cells | read-only | current | The upper 32 bit of the number of CLP0 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.1.1.43 | ColumncaclHighOutRcvCLP1Cells | read-only | current | The upper 32 bit of the number of CLP1 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.2 | TablecaclIntervalStatsTable | not-accessible | current | The ATM Cell layer interval stats table. This table contains statistics for the current (incomplete) interval and upto 96 previous (completed) 15-minute interv… |
| 1.3.6.1.4.1.9.9.133.1.2.2.1 | RowcaclIntervalStatsEntry | not-accessible | current | An entry for the ATM Cell layer interval statistics for a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex a… |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.1 | ColumncaclIntervalNumber | not-accessible | current | A number between 0 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.2 | ColumncaclIntervalInRcvCLP0Cells | read-only | current | The number of cells received on the interface with CLP0 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.3 | ColumncaclIntervalInRcvCLP1Cells | read-only | current | The number of cells received on the interface with CLP1 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.4 | ColumncaclIntervalInValidOAMCells | read-only | current | The number of valid Operation and Maintainance(OAM) cells received on the interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.5 | ColumncaclIntervalInErrOAMCells | read-only | current | The number of errored OAM cells received on the interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.6 | ColumncaclIntervalInGfcCells | read-only | current | The number of non-zero GFC cells received on the interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.7 | ColumncaclIntervalInVpiVciErrCells | read-only | current | The number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.8 | ColumncaclIntervalInLastUnknVpi | read-only | current | The last unknown Vpi value during 15 minute interval. This object is valid only if the value of 'caclIntervalInVpiVciErrCells' for the same interval is non-zer… |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.9 | ColumncaclIntervalInLastUnknVci | read-only | current | The last unknown Vci value during 15 minute interval. This object is valid only if the value of 'caclIntervalInVpiVciErrCells' for the same interval is non-zer… |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.10 | ColumncaclIntervalInXmtCLP0Cells | read-only | current | The number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.11 | ColumncaclIntervalInXmtCLP1Cells | read-only | current | The number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.12 | ColumncaclIntervalInValidRMCells | read-only | current | The number of Valid RM cells received from the interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.13 | ColumncaclIntervalInRcvIdleCells | read-only | current | The number of idle cells received from the interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.14 | ColumncaclIntervalInHecErrDiscCells | read-only | current | This object is the number of received cells which were discarded because they had HEC errors during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.15 | ColumncaclIntervalInHecErrCorrCells | read-only | current | The number of received cells which had HEC errors that were corrected during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.16 | ColumncaclIntervalInUpcCLP0DiscCells | read-only | current | This is the counter associated with the number of CLP0 cells discarded due to policing during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.17 | ColumncaclIntervalInUpcTotalDiscCells | read-only | current | The total number of cells(CLP0+1) discarded due to policing during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.18 | ColumncaclIntervalInUpcTotNonCmpCells | read-only | current | The number of non-compliant cells (cells that are not compliant to a specific traffic profile) discarded due to policing during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.19 | ColumncaclIntervalOutXmtCLP0Cells | read-only | current | The number of CLP0 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.20 | ColumncaclIntervalOutXmtCLP1Cells | read-only | current | The number of CLP1 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.21 | ColumncaclIntervalOutValidOAMCells | read-only | current | The number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.22 | ColumncaclIntervalOutErrOAMCells | read-only | current | The number of errored OAM cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.23 | ColumncaclIntervalOutVpiVciErrCells | read-only | current | The number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.24 | ColumncaclIntervalOutRcvCLP0Cells | read-only | current | The number of CLP0 cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.25 | ColumncaclIntervalOutRcvCLP1Cells | read-only | current | The number of CLP1 cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.26 | ColumncaclIntervalOutRcvValidRMCells | read-only | current | The number of Valid RM cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.27 | ColumncaclIntervalOutRcvIdleCells | read-only | current | The number of idle cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.28 | ColumncaclHighIntervalInRcvCLP0Cells | read-only | current | The Upper 32 bit of the number of cells received on the interface with CLP0 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.29 | ColumncaclHighIntervalInRcvCLP1Cells | read-only | current | The Upper 32 bit of the number of cells received on the interface with CLP1 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.30 | ColumncaclHighIntervalInVpiVciErrCells | read-only | current | The Upper 32 bit of the number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.31 | ColumncaclHighIntervalInXmtCLP0Cells | read-only | current | The Upper 32 bit of the number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.32 | ColumncaclHighIntervalInXmtCLP1Cells | read-only | current | The Upper 32 bit of the number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.33 | ColumncaclHighIntervalInHecErrDiscCells | read-only | current | This object is the Upper 32 bit of the number of received cells which were discarded because they had HEC errors during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.34 | ColumncaclHighIntervalInHecErrCorrCells | read-only | current | The number of received cells which had HEC errors that were corrected during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.35 | ColumncaclHighIntervalOutXmtCLP0Cells | read-only | current | The number of CLP0 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.36 | ColumncaclHighIntervalOutXmtCLP1Cells | read-only | current | The number of CLP1 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.37 | ColumncaclHighIntervalOutVpiVciErrCells | read-only | current | The number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.38 | ColumncaclHighIntervalOutRcvCLP0Cells | read-only | current | The number of CLP0 cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.2.1.39 | ColumncaclHighIntervalOutRcvCLP1Cells | read-only | current | The number of CLP1 cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.3 | TablecaclXStatsTable | not-accessible | current | The ATM Cell layer stats table is for the cell layer over a physical line. There is an entry for each SONET, DS3 or DS1 line. The table maintains objects that … |
| 1.3.6.1.4.1.9.9.133.1.2.3.1 | RowcaclXStatsEntry | not-accessible | current | An entry for the ATM Cell layer statistics for a physical line. These are realtime statistics which are collected per cell layer over a physical line. Entries … |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.1 | ColumncaclHCInValidOAMCells | read-only | current | The 64 bit version of the number of valid Operation and Maintainance(OAM) cells received on the interface. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.2 | ColumncaclHCInVpiVciErrCells | read-only | current | The 64 bit version of the number of cells received from the interface with unknown Vpi/Vci values. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.3 | ColumncaclHCInXmtCLP0Cells | read-only | current | The 64 bit version of the number of CLP0 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.4 | ColumncaclHCInXmtCLP1Cells | read-only | current | The 64 bit version of the number of CLP1 cells received from the interface and transmitted to the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.5 | ColumncaclHCInHecErrDiscCells | read-only | current | Header Error Check (HEC) calculation is used to provide error detection and correction from the ATM cell header. This object is 64 bit version of the the numbe… |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.6 | ColumncaclHCInHecErrCorrectedCells | read-only | current | The 64 bit version of thenumber of received cells which had HEC errors that were corrected. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.7 | ColumncaclHCOutValidOAMCells | read-only | current | The 64 bit version of the number of Operartion and Maintainance(OAM) cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.8 | ColumncaclHCOutRcvCLP0Cells | read-only | current | The 64 bit version of the number of CLP0 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.3.1.9 | ColumncaclHCOutRcvCLP1Cells | read-only | current | The 64 bit version of the number of CLP1 cells received by the interface from the switch fabric. |
| 1.3.6.1.4.1.9.9.133.1.2.4 | TablecaclXIntervalStatsTable | not-accessible | current | The ATM Cell layer interval stats table. This table contains statistics for the current (incomplete) interval and upto 96 previous (completed) 15-minute interv… |
| 1.3.6.1.4.1.9.9.133.1.2.4.1 | RowcaclXIntervalStatsEntry | not-accessible | current | An entry for the ATM Cell layer interval statistics for a physical line. Entries are created automatically for each line. The table is indexed by the ifIndex a… |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.1 | ColumncaclHCIntervalInRcvCLP0Cells | read-only | current | The 64 bit version of the number of cells received on the interface with CLP0 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.2 | ColumncaclHCIntervalInRcvCLP1Cells | read-only | current | The 64 bit version of the number of cells received on the interface with CLP1 bit set during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.3 | ColumncaclHCIntervalInVpiVciErrCells | read-only | current | The 64 bit version of the number of cells received from the interface with unknown Vpi/Vci values during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.4 | ColumncaclHCIntervalInXmtCLP0Cells | read-only | current | The 64 bit version of the number of CLP0 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.5 | ColumncaclHCIntervalInXmtCLP1Cells | read-only | current | The 64 bit version of the number of CLP1 cells received from the interface and transmitted to the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.6 | ColumncaclHCIntervalInHecErrDiscCells | read-only | current | This object is the 64 bit version of the number of received cells which were discarded because they had HEC errors during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.7 | ColumncaclHCIntervalInHecErrCorrCells | read-only | current | The 64 bit version of the number of received cells which had HEC errors that were corrected during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.8 | ColumncaclHCIntervalOutXmtCLP0Cells | read-only | current | The 64 bit version of the number of CLP0 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.9 | ColumncaclHCIntervalOutXmtCLP1Cells | read-only | current | The 64 bit version of the number of CLP1 cells transmitted to interface during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.10 | ColumncaclHCIntervalOutVpiVciErrCells | read-only | current | The 64 bit version of the number of cells with unknown vpi vci value in received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.11 | ColumncaclHCIntervalOutRcvCLP0Cells | read-only | current | The 64 bit version of the number of CLP0 cells received by the interfacefrom the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.2.4.1.12 | ColumncaclHCIntervalOutRcvCLP1Cells | read-only | current | The 64 bit version of the number of CLP1 cells received by the interface from the switch fabric during 15 minute interval. |
| 1.3.6.1.4.1.9.9.133.1.3 | NodecaclMIBConformance | |||
| 1.3.6.1.4.1.9.9.133.1.3.1 | NodecaclMIBCompliances | |||
| 1.3.6.1.4.1.9.9.133.1.3.1.1 | CompliancecaclMIBCompliance | deprecated | The Compliance statement for the Cisco ATM Cell layer MIB. | |
| 1.3.6.1.4.1.9.9.133.1.3.1.2 | CompliancecaclMIBCompliance1 | current | The Compliance statement for the Cisco ATM Cell layer MIB. | |
| 1.3.6.1.4.1.9.9.133.1.3.2 | NodecaclMIBGroups | |||
| 1.3.6.1.4.1.9.9.133.1.3.2.1 | GroupcaclMIBGroup | current | A collection of objects which provide ATM cell layer configuration parmeters. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.2 | GroupcaclATMSwitchStatsMIBGroup | deprecated | A collection of objects which provide statistics for ATM switch interfaces. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.3 | GroupcaclATMEndSyatemStatsMIBGroup | deprecated | A collection of objects which provide statistics for ATM end-system interfaces. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.4 | GroupcaclHighSpeedATMMIBGroup | deprecated | These statistics apply to ATM interfaces with speed of OC12 or higher. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.5 | GroupcaclIntervalStatsMIBGroup | deprecated | A collection of interval statistics. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.6 | GroupcaclATMSwitchStatsMIBGroup1 | current | A collection of objects which provide statistics for ATM switch interfaces. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.7 | GroupcaclATMStatsMIBGroup | current | A collection of objects which provide statistics for ATM switch and ATM end-system interfaces. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.8 | GroupcaclHighSpeedATMMIBGroup1 | current | These statistics apply to ATM interfaces with speed of OC12 or higher. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.9 | GroupcaclIntervalStatsMIBGroup1 | current | A collection of interval statistics. | |
| 1.3.6.1.4.1.9.9.133.1.3.2.10 | GroupcaclHCIntervalStatsMIBGroup | current | A collection of interval statistics. |